| Age | Commit message (Collapse) | Author |
|---|
|
The members here are being used for both the linear and the 2 level case,
with the meaning of each item slightly different in the two cases.
Split it into a clean union where both cases have their own struct with
their own logical names and correct types.
Adjust all the users to detect linear/2lvl and use the right sub structure
and types consistently.
Remove STRTAB_STE_DWORDS by changing the last places to use
sizeof(struct arm_smmu_ste).
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add types struct arm_smmu_strtab_l1 and l2 to represent the HW layout of
the descriptors, and use them in most places, following patches will get
the remaing places. The size of the l1 and l2 HW allocations are
sizeof(struct arm_smmu_strtab_l1/2).
This provides some more clarity than having raw __le64 *'s and sizes
computed via macros.
Remove STRTAB_L1_DESC_DWORDS.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Don't open code the calculations of the indexes for each level, provide
two functions to do that math and call them in all the places. Update all
the places computing indexes.
Calculate the L1 table size directly based on the max required index from
the cap. Remove STRTAB_L1_SZ_SHIFT in favour of STRTAB_NUM_L2_STES.
Use STRTAB_NUM_L2_STES to replace remaining open coded 1 << STRTAB_SPLIT.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The Qualcomm SDM630 / SDM660 platform requires the same kind of
workaround as MSM8998: some IOMMUs have context banks reserved by
firmware / TZ, touching those banks resets the board.
Apply the num_context_bank workaround to those two SMMU devices in order
to allow them to be used by Linux.
Fixes: b812834b5329 ("iommu: arm-smmu-qcom: Add sdm630/msm8998 compatibles for qcom quirks")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-1-e316055142f8@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since v5.12 the rbtree has gained some simplifying helpers aimed at making
rb tree users write less convoluted boiler plate code. Instead the caller
provides a single comparison function and the helpers generate the prior
open-coded stuff.
Update smmu->streams to use rb_find_add() and rb_find().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-9fef8cdc2ff6+150d1-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
It's observed that, when the first 4GB of system memory was reserved, all
VCMDQ allocations failed (even with the smallest qsz in the last attempt):
arm-smmu-v3: found companion CMDQV device: NVDA200C:00
arm-smmu-v3: option mask 0x10
arm-smmu-v3: failed to allocate queue (0x8000 bytes) for vcmdq0
acpi NVDA200C:00: tegra241_cmdqv: Falling back to standard SMMU CMDQ
arm-smmu-v3: ias 48-bit, oas 48-bit (features 0x001e1fbf)
arm-smmu-v3: allocated 524288 entries for cmdq
arm-smmu-v3: allocated 524288 entries for evtq
arm-smmu-v3: allocated 524288 entries for priq
This is because the 4GB reserved memory shifted the entire DMA zone from a
lower 32-bit range (on a system without the 4GB carveout) to higher range,
while the dev->coherent_dma_mask was set to DMA_BIT_MASK(32) by default.
The dma_set_mask_and_coherent() call is done in arm_smmu_device_hw_probe()
of the SMMU driver. So any DMA allocation from tegra241_cmdqv_probe() must
wait until the coherent_dma_mask is correctly set.
Move the vintf/vcmdq structure initialization routine into a different op,
"init_structures". Call it at the end of arm_smmu_init_structures(), where
standard SMMU queues get allocated.
Most of the impl_ops aren't ready until vintf/vcmdq structure are init-ed.
So replace the full impl_ops with an init_ops in __tegra241_cmdqv_probe().
And switch to tegra241_cmdqv_impl_ops later in arm_smmu_init_structures().
Note that tegra241_cmdqv_impl_ops does not link to the new init_structures
op after this switch, since there is no point in having it once it's done.
Fixes: 918eb5c856f6 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Reported-by: Matt Ochs <mochs@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/530993c3aafa1b0fc3d879b8119e13c629d12e2b.1725503154.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This is likely a typo. Drop it.
Fixes: 918eb5c856f6 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13fd3accb5b7ed6ec11cc6b7435f79f84af9f45f.1725503154.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The ioremap() function doesn't return error pointers, it returns NULL
on error so update the error handling. Also just return directly
instead of calling iounmap() on the NULL pointer. Calling
iounmap(NULL) doesn't cause a problem on ARM but on other architectures
it can trigger a warning so it'a bad habbit.
Fixes: 918eb5c856f6 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/5a6c1e9a-0724-41b1-86d4-36335d3768ea@stanley.mountain
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Kernel test robot reported a few trucation warnings at the snprintf:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:
In function ‘tegra241_vintf_free_lvcmdq’:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:239:56:
warning: ‘%u’ directive output may be truncated writing between 1 and
5 bytes into a region of size between 3 and 11 [-Wformat-truncation=]
239 | snprintf(header, hlen, "VINTF%u: VCMDQ%u/LVCMDQ%u: ",
| ^~
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:239:32: note: directive argument
in the range [0, 65535]
239 | snprintf(header, hlen, "VINTF%u: VCMDQ%u/LVCMDQ%u: ",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:239:9: note: ‘snprintf’ output
between 25 and 37 bytes into a destination of size 32
239 | snprintf(header, hlen, "VINTF%u: VCMDQ%u/LVCMDQ%u: ",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
240 | vcmdq->vintf->idx, vcmdq->idx, vcmdq->lidx);
Fix by bumping up the size of the header to hold more characters.
Fixes: 918eb5c856f6 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409020406.7ed5uojF-lkp@intel.com/
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20240902055745.629456-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
At the moment, the SMMUv3 unit tests assume ATS is always enabled,
although this is sufficient to test hitless/non-hitless transitions,
but exercising other features is useful to check ste/cd population
logic (for example the .get_used logic).
Add an enum where bits define features per-master, at the moment there
is only ATS and STALLs which are mutually exclusive, but this would
make it easier to extend with other features in the future.
Also, Add 2 more tests for s1 <-> s2 transitions with stalls enabled.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20240830110349.797399-3-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
According to the spec (ARM IHI 0070 F.b), in
"5.5 Fault configuration (A, R, S bits)":
A STE with stage 2 translation enabled and STE.S2S == 0 is
considered ILLEGAL if SMMU_IDR0.STALL_MODEL == 0b10.
Also described in the pseudocode “SteIllegal()”
if STE.Config == '11x' then
[..]
if eff_idr0_stall_model == '10' && STE.S2S == '0' then
// stall_model forcing stall, but S2S == 0
return TRUE;
Which means, S2S must be set when stall model is
"ARM_SMMU_FEAT_STALL_FORCE", but currently the driver ignores that.
Although, the driver can do the minimum and only set S2S for
“ARM_SMMU_FEAT_STALL_FORCE”, it is more consistent to match S1
behaviour, which also sets it for “ARM_SMMU_FEAT_STALL” if the
master has requested stalls.
Also, since S2 stalls are enabled now, report them to the IOMMU layer
and for VFIO devices it will fail anyway as VFIO doesn’t register an
iopf handler.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20240830110349.797399-2-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When VCMDQs are assigned to a VINTF owned by a guest (HYP_OWN bit unset),
only TLB and ATC invalidation commands are supported by the VCMDQ HW. So,
implement the new cmdq->supports_cmd op to scan the input cmd in order to
make sure that it is supported by the selected queue.
Note that the guest VM shouldn't have HYP_OWN bit being set regardless of
guest kernel driver writing it or not, i.e. the hypervisor running in the
host OS should wire this bit to zero when trapping a write access to this
VINTF_CONFIG register from a guest kernel.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/8160292337059b91271045800e5c62f7295e2c24.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The VCMDQ in the tegra241-cmdqv driver has a guest mode that supports only
a few invalidation commands. A batch is initialized with a cmdq, so it has
to confirm whether a new command is supported or not.
Add a supports_cmd function pointer to the cmdq structure, where the vcmdq
driver should hook a command scan function. Add an inline helper too so it
can be used by both sides.
If a new command is not supported, simply issue the existing batch and re-
init it as a new batch.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/aafb24b881504f18c5d0c7c15f2134e40ad2c486.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
NVIDIA's Tegra241 Soc has a CMDQ-Virtualization (CMDQV) hardware, extending
the standard ARM SMMU v3 IP to support multiple VCMDQs with virtualization
capabilities. In terms of command queue, they are very like a standard SMMU
CMDQ (or ECMDQs), but only support CS_NONE in the CS field of CMD_SYNC.
Add a new tegra241-cmdqv driver, and insert its structure pointer into the
existing arm_smmu_device, and then add related function calls in the SMMUv3
driver to interact with the CMDQV driver.
In the CMDQV driver, add a minimal part for the in-kernel support: reserve
VINTF0 for in-kernel use, and assign some of the VCMDQs to the VINTF0, and
select one VCMDQ based on the current CPU ID to execute supported commands.
This multi-queue design for in-kernel use gives some limited improvements:
up to 20% reduction of invalidation time was measured by a multi-threaded
DMA unmap benchmark, compared to a single queue.
The other part of the CMDQV driver will be user-space support that gives a
hypervisor running on the host OS to talk to the driver for virtualization
use cases, allowing VMs to use VCMDQs without trappings, i.e. no VM Exits.
This is designed based on IOMMUFD, and its RFC series is also under review.
It will provide a guest OS a bigger improvement: 70% to 90% reductions of
TLB invalidation time were measured by DMA unmap tests running in a guest,
compared to nested SMMU CMDQ (with trappings).
As the initial version, the CMDQV driver only supports ACPI configurations.
Signed-off-by: Nate Watterson <nwatterson@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/dce50490b2c10b7254fb36aa73ed7ffd812b283a.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Mimicing the arm-smmu (v2) driver, introduce a struct arm_smmu_impl_ops to
accommodate impl routines.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/8fe9f3805568aabf771fc6706c116459016bf62d.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For model-specific implementation, repurpose the acpi_smmu_get_options()
to a wider acpi_smmu_acpi_probe_model(). A new model can add to the list
in this new function.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/79716299829aeab2e55b8c7932f2634b209bb4d5.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The CMDQV extension in NVIDIA Tegra241 SoC only supports CS_NONE in the
CS field of CMD_SYNC. Add a new SMMU option to accommodate that.
Suggested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/a3cb9bb2429fbae4a59f7ef517614d226763d717.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The symbols __arm_smmu_cmdq_skip_err(), arm_smmu_init_one_queue(), and
arm_smmu_cmdq_init() need to be used by the tegra241-cmdqv compilation
unit in a following patch.
Remove the static and put prototypes in the header.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/c4f2aa5f5f40a2e7c68b132c6d3171d6403de57a.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
So that this function can be used by other cmdqs than &smmu->cmdq only.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/e11a3c0bde172c9652c2946f12bc2ceed4c3a355.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The CMDQV extension on NVIDIA Tegra241 SoC only supports CS_NONE in the
CS field of CMD_SYNC, v.s. standard SMMU CMDQ. Pass in the cmdq pointer
directly, so the function can identify a different cmdq implementation.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/723288287997b6dfbcd2a904d2c11e9b23f82250.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The driver calls in different places the arm_smmu_get_cmdq() helper, and
it's fine to do so since the helper always returns the single SMMU CMDQ.
However, with NVIDIA CMDQV extension or SMMU ECMDQ, there can be multiple
cmdqs in the system to select one from. And either case requires a batch
of commands to be issued to the same cmdq. Thus, a cmdq has to be decided
in the higher-level callers.
Add a cmdq pointer in arm_smmu_cmdq_batch structure, and decide the cmdq
when initializing the batch. Pass its pointer down to the bottom function.
Update __arm_smmu_cmdq_issue_cmd() accordingly for single command issuers.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/2cbf5ddefb6ea611e48d67c642271bd24421eb21.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
SDM845's Adreno SMMU is unique in that it actually advertizes support
for 16K (and 32M) pages, which doesn't hold for newer SoCs.
This however, seems either broken in the hardware implementation, the
hypervisor middleware that abstracts the SMMU, or there's a bug in the
Linux kernel somewhere down the line that nobody managed to track down.
Booting SDM845 with 16K page sizes and drm/msm results in:
*** gpu fault: ttbr0=0000000000000000 iova=000100000000c000 dir=READ
type=TRANSLATION source=CP (0,0,0,0)
right after loading the firmware. The GPU then starts spitting out
illegal intstruction errors, as it's quite obvious that it got a
bogus pointer.
Moreover, it seems like this issue also concerns other implementations
of SMMUv2 on Qualcomm SoCs, such as the one on SC7180.
Hide 16K support on such instances to work around this.
Reported-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240824-topic-845_gpu_smmu-v2-1-a302b8acc052@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On qcom msm8998, writing to the last context bank of lpass_q6_smmu
(base address 0x05100000) produces a system freeze & reboot.
The hardware/hypervisor reports 13 context banks for the LPASS SMMU
on msm8998, but only the first 12 are accessible...
Override the number of context banks
[ 2.546101] arm-smmu 5100000.iommu: probing hardware configuration...
[ 2.552439] arm-smmu 5100000.iommu: SMMUv2 with:
[ 2.558945] arm-smmu 5100000.iommu: stage 1 translation
[ 2.563627] arm-smmu 5100000.iommu: address translation ops
[ 2.568923] arm-smmu 5100000.iommu: non-coherent table walk
[ 2.574566] arm-smmu 5100000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 2.580220] arm-smmu 5100000.iommu: stream matching with 12 register groups
[ 2.587263] arm-smmu 5100000.iommu: 13 context banks (0 stage-2 only)
[ 2.614447] arm-smmu 5100000.iommu: Supported page sizes: 0x63315000
[ 2.621358] arm-smmu 5100000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
[ 2.627772] arm-smmu 5100000.iommu: preserved 0 boot mappings
Specifically, the crashes occur here:
qsmmu->bypass_cbndx = smmu->num_context_banks - 1;
arm_smmu_cb_write(smmu, qsmmu->bypass_cbndx, ARM_SMMU_CB_SCTLR, 0);
and here:
arm_smmu_write_context_bank(smmu, i);
arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_FSR, ARM_SMMU_CB_FSR_FAULT);
It is likely that FW reserves the last context bank for its own use,
thus a simple work-around is: DON'T USE IT in Linux.
If we decrease the number of context banks, last one will be "hidden".
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240820-smmu-v3-1-2f71483b00ec@freebox.fr
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The arm_smmu_domain_alloc() function returns error pointers on error. It
doesn't return NULL. Update the error checking to match.
Fixes: 52acd7d8a413 ("iommu/arm-smmu-v3: Add support for domain_alloc_user fn")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9208cd0d-8105-40df-93e9-bdcdf0d55eec@stanley.mountain
Signed-off-by: Will Deacon <will@kernel.org>
|
|
arm_smmu_sva_remove_dev_pasid() has been removed since commit d38c28dbefee
("iommu/arm-smmu-v3: Put the SVA mmu notifier in the smmu_domain"), remain
the empty definition untouched in header file, which is used when
CONFIG_ARM_SMMU_V3_SVA is not set. So, let's remove the unused definition.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240815111504.48810-1-zhangzekun11@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Previously this was dev_err_ratelimited() but it got changed to a
ratelimited dev_dbg(). Change it back to dev_err().
Fixes: d525b0af0c3b ("iommu/arm-smmu: Pretty-print context fault related regs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20240809172716.10275-1-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Fix 32-bit PTI for real.
pti_clone_entry_text() is called twice, once before initcalls so that
initcalls can use the user-mode helper and then again after text is
set read only. Setting read only on 32-bit might break up the PMD
mapping, which makes the second invocation of pti_clone_entry_text()
find the mappings out of sync and failing.
Allow the second call to split the existing PMDs in the user mapping
and synchronize with the kernel mapping.
- Don't make acpi_mp_wake_mailbox read-only after init as the mail box
must be writable in the case that CPU hotplug operations happen after
boot. Otherwise the attempt to start a CPU crashes with a write to
read only memory.
- Add a missing sanity check in mtrr_save_state() to ensure that the
fixed MTRR MSRs are supported.
Otherwise mtrr_save_state() ends up in a #GP, which is fixed up, but
the WARN_ON() can bring systems down when panic on warn is set.
* tag 'x86-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Check if fixed MTRRs exist before saving them
x86/paravirt: Fix incorrect virt spinlock setting on bare metal
x86/acpi: Remove __ro_after_init from acpi_mp_wake_mailbox
x86/mm: Fix PTI for i386 some more
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time keeping fixes from Thomas Gleixner:
- Fix a couple of issues in the NTP code where user supplied values are
neither sanity checked nor clamped to the operating range. This
results in integer overflows and eventualy NTP getting out of sync.
According to the history the sanity checks had been removed in favor
of clamping the values, but the clamping never worked correctly under
all circumstances. The NTP people asked to not bring the sanity
checks back as it might break existing applications.
Make the clamping work correctly and add it where it's missing
- If adjtimex() sets the clock it has to trigger the hrtimer subsystem
so it can adjust and if the clock was set into the future expire
timers if needed. The caller should provide a bitmask to tell
hrtimers which clocks have been adjusted.
adjtimex() uses not the proper constant and uses CLOCK_REALTIME
instead, which is 0. So hrtimers adjusts only the clocks, but does
not check for expired timers, which might make them expire really
late. Use the proper bitmask constant instead.
* tag 'timers-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix bogus clock_was_set() invocation in do_adjtimex()
ntp: Safeguard against time_constant overflow
ntp: Clamp maxerror and esterror to operating range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Three small fixes for interrupt core and drivers:
- The interrupt core fails to honor caller supplied affinity hints
for non-managed interrupts and uses the system default affinity on
startup instead. Set the missing flag in the descriptor to tell the
core to use the provided affinity.
- Fix a shift out of bounds error in the Xilinx driver
- Handle switching to level trigger correctly in the RISCV APLIC
driver. It failed to retrigger the interrupt which causes it to
become stale"
* tag 'irq-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Retrigger MSI interrupt on source configuration
irqchip/xilinx: Fix shift out of bounds
genirq/irqdesc: Honor caller provided affinity in alloc_desc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for reported issues for
6.11-rc3. Included in here are:
- usb serial driver MODULE_DESCRIPTION() updates
- usb serial driver fixes
- typec driver fixes
- usb-ip driver fix
- gadget driver fixes
- dt binding update
All of these have been in linux-next with no reported issues"
* tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common()
usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message
usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt()
usb: gadget: f_fs: restore ffs_func_disable() functionality
USB: serial: debug: do not echo input by default
usb: typec: tipd: Delete extra semi-colon
usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch()
usb: gadget: u_serial: Set start_delayed during suspend
usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap()
usb: typec: fsa4480: Check if the chip is really there
usb: gadget: core: Check for unset descriptor
usb: vhci-hcd: Do not drop references before new references are gained
usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed.
usb: gadget: midi2: Fix the response for FB info with block 0xff
dt-bindings: usb: microchip,usb2514: Add USB2517 compatible
USB: serial: garmin_gps: use struct_size() to allocate pkt
USB: serial: garmin_gps: annotate struct garmin_packet with __counted_by
USB: serial: add missing MODULE_DESCRIPTION() macros
USB: serial: spcp8x5: remove unused struct 'spcp8x5_usb_ctrl_arg'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported problems
for 6.11-rc3. Included in here are:
- sc16is7xx serial driver fixes
- uartclk bugfix for a divide by zero issue
- conmakehash userspace build issue fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: conmakehash: cope with abs_srctree no longer in env
serial: sc16is7xx: fix invalid FIFO access with special register set
serial: sc16is7xx: fix TX fifo corruption
serial: core: check uartclk for zero to avoid divide by zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / documentation fixes from Greg KH:
"Here are some small fixes, and some documentation updates for
6.11-rc3. Included in here are:
- embargoed hardware documenation updates based on a lot of review by
legal-types in lots of companies to try to make the process a _bit_
easier for us to manage over time.
- rust firmware documentation fix
- driver detach race fix for the fix that went into 6.11-rc1
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix uevent_show() vs driver detach race
Documentation: embargoed-hardware-issues.rst: add a section documenting the "early access" process
Documentation: embargoed-hardware-issues.rst: minor cleanups and fixes
rust: firmware: fix invalid rustdoc link
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc3 for
reported issues. Included in here are:
- binder driver fixes
- fsi MODULE_DESCRIPTION() additions (people seem to love them...)
- eeprom driver fix
- Kconfig dependency fix to resolve build issues
- spmi driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
spmi: pmic-arb: add missing newline in dev_err format strings
spmi: pmic-arb: Pass the correct of_node to irq_domain_add_tree
binder_alloc: Fix sleeping function called from invalid context
binder: fix descriptor lookup for context manager
char: add missing NetWinder MODULE_DESCRIPTION() macros
misc: mrvl-cn10k-dpi: add PCI_IOV dependency
eeprom: ee1004: Fix locking issues in ee1004_probe()
fsi: add missing MODULE_DESCRIPTION() macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core fixes: one to prevent discard type changes (seen on iSCSI)
during intermittent errors and the other is fixing a lockdep problem
caused by the queue limits change.
And one driver fix in ufs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Keep the discard mode stable
scsi: sd: Move sd_read_cpr() out of the q->limits_lock region
scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Two minor fixes for recent changes
* tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't set SVC_SOCK_ANONYMOUS when creating nfsd sockets
sunrpc: avoid -Wformat-security warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- Two fixes for SMBusAlert handling in the I2C core: one to avoid an
endless loop when scanning for handlers and one to make sure handlers
are always called even if HW has broken behaviour
- I2C header build fix for when ACPI is enabled but I2C isn't
- The testunit gets a rename in the code to match the documentation
- Two fixes for the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out
* tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: match HostNotify test name with docs
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume
i2c: Fix conditional for substituting empty ACPI functions
i2c: smbus: Send alert notifications to all devices if source not found
i2c: smbus: Improve handling of stuck alerts
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- avoid a deadlock with dma-debug and netconsole (Rik van Riel)
* tag 'dma-mapping-6.11-2024-08-10' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: avoid deadlock between dma debug vs printk and netconsole
|
|
Pull more bcachefs fixes from Kent Overstreet:
"A couple last minute fixes for the new disk accounting
- fix a bug that was causing ACLs to seemingly "disappear"
- new on disk format version, bcachefs_metadata_version_disk_accounting_v3
bcachefs_metadata_version_disk_accounting_v2 accidentally included
padding in disk_accounting_key; fortunately, 6.11 isn't out yet so
we can fix this with another version bump"
* tag 'bcachefs-2024-08-10' of git://evilpiepirate.org/bcachefs:
bcachefs: bcachefs_metadata_version_disk_accounting_v3
bcachefs: improve bch2_dev_usage_to_text()
bcachefs: bch2_accounting_invalid()
bcachefs: Switch to .get_inode_acl()
|
|
The section 4.5.2 of the RISC-V AIA specification says that "any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode."
When the interrupt type is changed in the sourcecfg register, the APLIC
device might not set the corresponding pending bit, so the interrupt might
never become pending.
To handle sourcecfg register changes for level-triggered interrupts in MSI
mode, manually set the pending bit for retriggering interrupt so it gets
retriggered if it was already asserted.
Fixes: ca8df97fe679 ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240809071049.2454-1-yongxuan.wang@sifive.com
|
|
The device tree property 'xlnx,kind-of-intr' is sanity checked that the
bitmask contains only set bits which are in the range of the number of
interrupts supported by the controller.
The check is done by shifting the mask right by the number of supported
interrupts and checking the result for zero.
The data type of the mask is u32 and the number of supported interrupts is
up to 32. In case of 32 interrupts the shift is out of bounds, resulting in
a mismatch warning. The out of bounds condition is also reported by UBSAN:
UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22
shift exponent 32 is too large for 32-bit type 'unsigned int'
Fix it by promoting the mask to u64 for the test.
Fixes: d50466c90724 ("microblaze: intc: Refactor DT sanity check")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com
|
|
Pull smb client fixes from Steve French:
- DFS fix
- fix for security flags for requiring encryption
- minor cleanup
* tag '6.11-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: cifs_inval_name_dfs_link_error: correct the check for fullpath
Fix spelling errors in Server Message Block
smb3: fix setting SecurityFlags when encryption is required
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few SPI fixes: clock rate calculation fixes for the Kunpeng and lpsi
drivers and a missing registration of a device ID for spidev (which
had only been updated for DT cases, causing warnings)"
* tag 'spi-fix-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-lpspi: Fix scldiv calculation
spi: spidev: Add missing spi_device_id for bh2228fv
spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware
spi: hisi-kunpeng: Add validation for the minimum value of speed_hz
|
|
bcachefs_metadata_version_disk_accounting_v2 erroneously had padding
bytes in disk_accounting_key, which is a problem because we have to
guarantee that all unused bytes in disk_accounting_key are zeroed.
Fortunately 6.11 isn't out yet, so it's cheap to fix this by spinning a
new version.
Reported-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull drm fixes from Dave Airlie:
"Weekly regular fixes, mostly amdgpu with i915/xe having a few each,
and then some misc bits across the board, seems about right for rc3
time.
client:
- fix null ptr deref
bridge:
- connector: fix double free
atomic:
- fix async flip update
panel:
- document panel
omap:
- add config dependency
tests:
- fix gem shmem test
drm buddy:
- Add start address to trim function
amdgpu:
- DMCUB fix
- Fix DET programming on some DCNs
- DCC fixes
- DCN 4.0.1 fixes
- SMU 14.0.x update
- MMHUB fix
- DCN 3.1.4 fix
- GC 12.0 fixes
- Fix soft recovery error propogation
- SDMA 7.0 fixes
- DSC fix
xe:
- Fix off-by-one when processing RTP rules
- Use dma_fence_chain_free in chain fence unused as a sync
- Fix PL1 disable flow in xe_hwmon_power_max_write
- Take ref to VM in delayed dump snapshot
i915:
- correct dual pps handling for MTL_PCH+ [display]
- Adjust vma offset for framebuffer mmap offset [gem]
- Fix Virtual Memory mapping boundaries calculation [gem]
- Allow evicting to use the requested placement
- Attempt to get pages without eviction first"
* tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/xe: Take ref to VM in delayed snapshot
drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_write
drm/xe: Use dma_fence_chain_free in chain fence unused as a sync
drm/xe/rtp: Fix off-by-one when processing rules
drm/amdgpu: Add DCC GFX12 flag to enable address alignment
drm/amdgpu: correct sdma7 max dw
drm/amdgpu: Add address alignment support to DCC buffers
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
drm/amdgpu: change non-dcc buffer copy configuration
drm/amdgpu: Forward soft recovery errors to userspace
drm/amdgpu: add golden setting for gc v12
drm/buddy: Add start address support to trim function
drm/amd/display: Add missing program DET segment call to pipe init
drm/amd/display: Add missing DCN314 to the DML Makefile
drm/amdgpu: force to use legacy inv in mmhub
drm/amd/pm: update powerplay structure on smu v14.0.2/3
drm/amd/display: Add missing mcache registers
drm/amd/display: Add dcc propagation value
drm/amd/display: Add missing DET segments programming
drm/amd/display: Replace dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd
...
|
|
Add a line for capacity
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Implement bch2_accounting_invalid(); check for junk at the end, and
replicas accounting entries in particular need to be checked or we'll
pop asserts later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull cpumask fix from Yury Norov:
"Fix for cpumask merge"
[ Mea culpa, this was my mismerge due to too much cut-and-paste - Linus ]
* tag 'bitmap-6.11-rc' of https://github.com/norov/linux:
cpumask: Fix crash on updating CPU enabled mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Change the default EPP (energy-performence preference) value for the
Emerald Rapids processor in the intel_pstate driver.
Thisshould improve both the performance and energy efficiency (Pedro
Henrique Kopper)"
* tag 'pm-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Update Balance performance EPP for Emerald Rapids
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"There are two more changes to the syscall.tbl conversion: the
'__NR_newfstat' in the previous bugfix was a mistake and gets reverted
now, after triple-checking that the contents are now back to what they
were on all architectures. The __NR_nfsservctl definition is not
really needed but came up in the same discussion as it had previously
been defined in uapi/asm-generic/unistd.h and tested for in user
space.
There are a few more symbols that used to be defined in the old
unistd.h file, but that are never defined on any other architecture
using syscall.tbl format. These used to be needed inside of the
kernel:
__NR_syscalls
__NR_arch_specific_syscall
__NR3264_*
Searching for these on https://codesearch.debian.net/ shows a few
packages (rustc, golang, clamav, libseccomp, librsvg, strace) that
duplicate all the macros from asm/unistd.h, but nothing that actually
uses the macros, so I concluded that they are fine to omit after all"
* tag 'asm-generic-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: add back legacy __NR_nfsservctl macro
syscalls: fix fstat() entry again
|
