summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-15rocker: fix incorrect error handling in dma_rings_initAditya Pakki
In rocker_dma_rings_init, the goto blocks in case of errors caused by the functions rocker_dma_cmd_ring_waits_alloc() and rocker_dma_ring_create() are incorrect. The patch fixes the order consistent with cleanup in rocker_dma_rings_fini(). Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15test_objagg: Fix potential memory leak in error handlingAditya Pakki
In case of failure of check_expect_hints_stats(), the resources allocated by objagg_hints_get should be freed. The patch fixes this issue. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15net: ethernet: mtk-star-emac: simplify interrupt handlingBartosz Golaszewski
During development we tried to make the interrupt handling as fine-grained as possible with TX and RX interrupts being disabled/enabled independently and the counter registers reset from workqueue context. Unfortunately after thorough testing of current mainline, we noticed the driver has become unstable under heavy load. While this is hard to reproduce, it's quite consistent in the driver's current form. This patch proposes to go back to the previous approach of doing all processing in napi context with all interrupts masked in order to make the driver usable in mainline linux. This doesn't impact the performance on pumpkin boards at all and it's in line with what many ethernet drivers do in mainline linux anyway. At the same time we're adding a FIXME comment about the need to improve the interrupt handling. Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15mld: fix memory leak in ipv6_mc_destroy_dev()Wang Hai
Commit a84d01647989 ("mld: fix memory leak in mld_del_delrec()") fixed the memory leak of MLD, but missing the ipv6_mc_destroy_dev() path, in which mca_sources are leaked after ma_put(). Using ip6_mc_clear_src() to take care of the missing free. BUG: memory leak unreferenced object 0xffff8881113d3180 (size 64): comm "syz-executor071", pid 389, jiffies 4294887985 (age 17.943s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff 02 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002cbc483c>] kmalloc include/linux/slab.h:555 [inline] [<000000002cbc483c>] kzalloc include/linux/slab.h:669 [inline] [<000000002cbc483c>] ip6_mc_add1_src net/ipv6/mcast.c:2237 [inline] [<000000002cbc483c>] ip6_mc_add_src+0x7f5/0xbb0 net/ipv6/mcast.c:2357 [<0000000058b8b1ff>] ip6_mc_source+0xe0c/0x1530 net/ipv6/mcast.c:449 [<000000000bfc4fb5>] do_ipv6_setsockopt.isra.12+0x1b2c/0x3b30 net/ipv6/ipv6_sockglue.c:754 [<00000000e4e7a722>] ipv6_setsockopt+0xda/0x150 net/ipv6/ipv6_sockglue.c:950 [<0000000029260d9a>] rawv6_setsockopt+0x45/0x100 net/ipv6/raw.c:1081 [<000000005c1b46f9>] __sys_setsockopt+0x131/0x210 net/socket.c:2132 [<000000008491f7db>] __do_sys_setsockopt net/socket.c:2148 [inline] [<000000008491f7db>] __se_sys_setsockopt net/socket.c:2145 [inline] [<000000008491f7db>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2145 [<00000000c7bc11c5>] do_syscall_64+0xa1/0x530 arch/x86/entry/common.c:295 [<000000005fb7a3f3>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15Merge branch 'bnxt_en-Bug-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: Bug fixes. Four fixes related to the bnxt_en driver's resume path, AER reset, and the timer function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15bnxt_en: Return from timer if interface is not in open state.Vasundhara Volam
This will avoid many uneccessary error logs when driver or firmware is in reset. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15bnxt_en: Fix AER reset logic on 57500 chips.Michael Chan
AER reset should follow the same steps as suspend/resume. We need to free context memory during AER reset and allocate new context memory during recovery by calling bnxt_hwrm_func_qcaps(). We also need to call bnxt_reenable_sriov() to restore the VFs. Fixes: bae361c54fb6 ("bnxt_en: Improve AER slot reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15bnxt_en: Re-enable SRIOV during resume.Michael Chan
If VFs are enabled, we need to re-configure them during resume because firmware has been reset while resuming. Otherwise, the VFs won't work after resume. Fixes: c16d4ee0e397 ("bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15bnxt_en: Simplify bnxt_resume().Michael Chan
The separate steps we do in bnxt_resume() can be done more simply by calling bnxt_hwrm_func_qcaps(). This change will add an extra __bnxt_hwrm_func_qcaps() call which is needed anyway on older firmware. Fixes: f9b69d7f6279 ("bnxt_en: Fix suspend/resume path on 57500 chips") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix bogus EEXIST on element insertions to the rbtree with timeouts, from Stefano Brivio. 2) Preempt BUG splat in the pipapo element insertion path, also from Stefano. 3) Release filter from the ctnetlink error path. 4) Release flowtable hooks from the deletion path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15MAINTAINERS: merge entries for felix and ocelot driversVladimir Oltean
The ocelot switchdev driver also provides a set of library functions for the felix DSA driver, which in practice means that most of the patches will be of interest to both groups of driver maintainers. So, as also suggested in the discussion here, let's merge the 2 entries into a single larger one: https://www.spinics.net/lists/netdev/msg657412.html Note that the entry has been renamed into "OCELOT SWITCH" since neither Vitesse nor Microsemi exist any longer as company names, instead they are now named Microchip (which again might be subject to change in the future), so use the device family name instead. Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15net: alx: fix race condition in alx_removeZekun Shen
There is a race condition exist during termination. The path is alx_stop and then alx_remove. An alx_schedule_link_check could be called before alx_stop by interrupt handler and invoke alx_link_check later. Alx_stop frees the napis, and alx_remove cancels any pending works. If any of the work is scheduled before termination and invoked before alx_remove, a null-ptr-deref occurs because both expect alx->napis[i]. This patch fix the race condition by moving cancel_work_sync functions before alx_free_napis inside alx_stop. Because interrupt handler can call alx_schedule_link_check again, alx_free_irq is moved before cancel_work_sync calls too. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15ibmvnic: Harden device login requestsThomas Falcon
The VNIC driver's "login" command sequence is the final step in the driver's initialization process with device firmware, confirming the available device queue resources to be utilized by the driver. Under high system load, firmware may not respond to the request in a timely manner or may abort the request. In such cases, the driver should reattempt the login command sequence. In case of a device error, the number of retries is bounded. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15net: macb: Only disable NAPI on the actual error pathCharles Keepax
A recent change added a disable to NAPI into macb_open, this was intended to only happen on the error path but accidentally applies to all paths. This causes NAPI to be disabled on the success path, which leads to the network to no longer functioning. Fixes: 014406babc1f ("net: cadence: macb: disable NAPI on error") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15qlcnic: Use kobj_to_dev() insteadWang Qing
Use kobj_to_dev() instead of container_of() Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15mptcp: use list_first_entry_or_nullGeliang Tang
Use list_first_entry_or_null to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15net: axienet: fix spelling mistake in comment "Exteneded" -> "extended"Colin Ian King
There is a spelling mistake in a comment. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15mptcp: drop MPTCP_PM_MAX_ADDRGeliang Tang
We have defined MPTCP_PM_ADDR_MAX in pm_netlink.c, so drop this duplicate macro. Fixes: 1b1c7a0ef7f3 ("mptcp: Add path manager interface") Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15net/rds: NULL pointer de-reference in rds_ib_add_one()Ka-Cheong Poon
The parent field of a struct device may be NULL. The macro ibdev_to_node() should check for that. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15Merge tag 'ext4-for-linus-5.8-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull more ext4 updates from Ted Ts'o: "This is the second round of ext4 commits for 5.8 merge window [1]. It includes the per-inode DAX support, which was dependant on the DAX infrastructure which came in via the XFS tree, and a number of regression and bug fixes; most notably the "BUG: using smp_processor_id() in preemptible code in ext4_mb_new_blocks" reported by syzkaller" [1] The pull request actually came in 15 minutes after I had tagged the rc1 release. Tssk, tssk, late.. - Linus * tag 'ext4-for-linus-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4, jbd2: ensure panic by fix a race between jbd2 abort and ext4 error handlers ext4: support xattr gnu.* namespace for the Hurd ext4: mballoc: Use this_cpu_read instead of this_cpu_ptr ext4: avoid utf8_strncasecmp() with unstable name ext4: stop overwrite the errcode in ext4_setup_super ext4: fix partial cluster initialization when splitting extent ext4: avoid race conditions when remounting with options that change dax Documentation/dax: Update DAX enablement for ext4 fs/ext4: Introduce DAX inode flag fs/ext4: Remove jflag variable fs/ext4: Make DAX mount option a tri-state fs/ext4: Only change S_DAX on inode load fs/ext4: Update ext4_should_use_dax() fs/ext4: Change EXT4_MOUNT_DAX to EXT4_MOUNT_DAX_ALWAYS fs/ext4: Disallow verity if inode is DAX fs/ext4: Narrow scope of DAX check in setflags
2020-06-15arm64: mm: reset address tag set by kasan sw taggingShyam Thombre
KASAN sw tagging sets a random tag of 8 bits in the top byte of the pointer returned by the memory allocating functions. So for the functions unaware of this change, the top 8 bits of the address must be reset which is done by the function arch_kasan_reset_tag(). Signed-off-by: Shyam Thombre <sthombre@codeaurora.org> Link: https://lore.kernel.org/r/1591787384-5823-1-git-send-email-sthombre@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-06-15arm64: traps: Dump registers prior to panic() in bad_mode()Will Deacon
When panicing due to an unknown/unhandled exception at EL1, dump the registers of the faulting context so that it's easier to figure out what went wrong. In particular, this makes it a lot easier to debug in-kernel BTI failures since it pretty-prints PSTATE.BTYPE in the crash log. Cc: Mark Brown <broonie@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200615113458.2884-1-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-06-15arm64/sve: Eliminate data races on sve_default_vlDave Martin
sve_default_vl can be modified via the /proc/sys/abi/sve_default_vl sysctl concurrently with use, and modified concurrently by multiple threads. Adding a lock for this seems overkill, and I don't want to think any more than necessary, so just define wrappers using READ_ONCE()/ WRITE_ONCE(). This will avoid the possibility of torn accesses and repeated loads and stores. There's no evidence yet that this is going wrong in practice: this is just hygiene. For generic sysctl users, it would be better to build this kind of thing into the sysctl common code somehow. Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Link: https://lore.kernel.org/r/1591808590-20210-3-git-send-email-Dave.Martin@arm.com [will: move set_sve_default_vl() inside #ifdef to squash allnoconfig warning] Signed-off-by: Will Deacon <will@kernel.org>
2020-06-15tools: testing: ftrace: trigger: fix spelling mistakeFlavio Suligoi
Fix typo: "tigger" --> "trigger" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-06-15io_uring: cancel by ->task not pidPavel Begunkov
For an exiting process it tries to cancel all its inflight requests. Use req->task to match such instead of work.pid. We always have req->task set, and it will be valid because we're matching only current exiting task. Also, remove work.pid and everything related, it's useless now. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15io_uring: lazy get taskPavel Begunkov
There will be multiple places where req->task is used, so refcount-pin it lazily with introduced *io_{get,put}_req_task(). We need to always have valid ->task for cancellation reasons, but don't care about pinning it in some cases. That's why it sets req->task in io_req_init() and implements get/put laziness with a flag. This also removes using @current from polling io_arm_poll_handler(), etc., but doesn't change observable behaviour. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15io_uring: batch cancel in io_uring_cancel_files()Pavel Begunkov
Instead of waiting for each request one by one, first try to cancel all of them in a batched manner, and then go over inflight_list/etc to reap leftovers. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15io_uring: cancel all task's requests on exitPavel Begunkov
If a process is going away, io_uring_flush() will cancel only 1 request with a matching pid. Cancel all of them Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15io-wq: add an option to cancel all matched reqsPavel Begunkov
This adds support for cancelling all io-wq works matching a predicate. It isn't used yet, so no change in observable behaviour. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15io-wq: reorder cancellation pending -> runningPavel Begunkov
Go all over all pending lists and cancel works there, and only then try to match running requests. No functional changes here, just a preparation for bulk cancellation. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15afs: Fix the mapping of the UAEOVERFLOW abort codeDavid Howells
Abort code UAEOVERFLOW is returned when we try and set a time that's out of range, but it's currently mapped to EREMOTEIO by the default case. Fix UAEOVERFLOW to map instead to EOVERFLOW. Found with the generic/258 xfstest. Note that the test is wrong as it assumes that the filesystem will support a pre-UNIX-epoch date. Fixes: 1eda8bab70ca ("afs: Add support for the UAE error table") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15afs: Fix truncation issues and mmap writeback sizeDavid Howells
Fix the following issues: (1) Fix writeback to reduce the size of a store operation to i_size, effectively discarding the extra data. The problem comes when afs_page_mkwrite() records that a page is about to be modified by mmap(). It doesn't know what bits of the page are going to be modified, so it records the whole page as being dirty (this is stored in page->private as start and end offsets). Without this, the marshalling for the store to the server extends the size of the file to the end of the page (in afs_fs_store_data() and yfs_fs_store_data()). (2) Fix setattr to actually truncate the pagecache, thereby clearing the discarded part of a file. (3) Fix setattr to check that the new size is okay and to disable ATTR_SIZE if i_size wouldn't change. (4) Force i_size to be updated as the result of a truncate. (5) Don't truncate if ATTR_SIZE is not set. (6) Call pagecache_isize_extended() if the file was enlarged. Note that truncate_set_size() isn't used because the setting of i_size is done inside afs_vnode_commit_status() under the vnode->cb_lock. Found with the generic/029 and generic/393 xfstests. Fixes: 31143d5d515e ("AFS: implement basic file write support") Fixes: 4343d00872e1 ("afs: Get rid of the afs_writeback record") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15afs: Concoct ctimesDavid Howells
The in-kernel afs filesystem ignores ctime because the AFS fileserver protocol doesn't support ctimes. This, however, causes various xfstests to fail. Work around this by: (1) Setting ctime to attr->ia_ctime in afs_setattr(). (2) Not ignoring ATTR_MTIME_SET, ATTR_TIMES_SET and ATTR_TOUCH settings. (3) Setting the ctime from the server mtime when on the target file when creating a hard link to it. (4) Setting the ctime on directories from their revised mtimes when renaming/moving a file. Found by the generic/221 and generic/309 xfstests. Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15afs: Fix EOF corruptionDavid Howells
When doing a partial writeback, afs_write_back_from_locked_page() may generate an FS.StoreData RPC request that writes out part of a file when a file has been constructed from pieces by doing seek, write, seek, write, ... as is done by ld. The FS.StoreData RPC is given the current i_size as the file length, but the server basically ignores it unless the data length is 0 (in which case it's just a truncate operation). The revised file length returned in the result of the RPC may then not reflect what we suggested - and this leads to i_size getting moved backwards - which causes issues later. Fix the client to take account of this by ignoring the returned file size unless the data version number jumped unexpectedly - in which case we're going to have to clear the pagecache and reload anyway. This can be observed when doing a kernel build on an AFS mount. The following pair of commands produce the issue: ld -m elf_x86_64 -z max-page-size=0x200000 --emit-relocs \ -T arch/x86/realmode/rm/realmode.lds \ arch/x86/realmode/rm/header.o \ arch/x86/realmode/rm/trampoline_64.o \ arch/x86/realmode/rm/stack.o \ arch/x86/realmode/rm/reboot.o \ -o arch/x86/realmode/rm/realmode.elf arch/x86/tools/relocs --realmode \ arch/x86/realmode/rm/realmode.elf \ >arch/x86/realmode/rm/realmode.relocs This results in the latter giving: Cannot read ELF section headers 0/18: Success as the realmode.elf file got corrupted. The sequence of events can also be driven with: xfs_io -t -f \ -c "pwrite -S 0x58 0 0x58" \ -c "pwrite -S 0x59 10000 1000" \ -c "close" \ /afs/example.com/scratch/a Fixes: 31143d5d515e ("AFS: implement basic file write support") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15afs: afs_write_end() should change i_size under the right lockDavid Howells
Fix afs_write_end() to change i_size under vnode->cb_lock rather than ->wb_lock so that it doesn't race with afs_vnode_commit_status() and afs_getattr(). The ->wb_lock is only meant to guard access to ->wb_keys which isn't accessed by that piece of code. Fixes: 4343d00872e1 ("afs: Get rid of the afs_writeback record") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15afs: Fix non-setting of mtime when writing into mmapDavid Howells
The mtime on an inode needs to be updated when a write is made into an mmap'ed section. There are three ways in which this could be done: update it when page_mkwrite is called, update it when a page is changed from dirty to writeback or leave it to the server and fix the mtime up from the reply to the StoreData RPC. Found with the generic/215 xfstest. Fixes: 1cf7a1518aef ("afs: Implement shared-writeable mmap") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15io_uring: fix lazy work initPavel Begunkov
Don't leave garbage in req.work before punting async on -EAGAIN in io_iopoll_queue(). [ 140.922099] general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI ... [ 140.922105] RIP: 0010:io_worker_handle_work+0x1db/0x480 ... [ 140.922114] Call Trace: [ 140.922118] ? __next_timer_interrupt+0xe0/0xe0 [ 140.922119] io_wqe_worker+0x2a9/0x360 [ 140.922121] ? _raw_spin_unlock_irqrestore+0x24/0x40 [ 140.922124] kthread+0x12c/0x170 [ 140.922125] ? io_worker_handle_work+0x480/0x480 [ 140.922126] ? kthread_park+0x90/0x90 [ 140.922127] ret_from_fork+0x22/0x30 Fixes: 7cdaf587de7c ("io_uring: avoid whole io_wq_work copy for requests completed inline") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15blk-mq: Remove redundant 'return' statementBaolin Wang
The blk_mq_all_tag_iter() is a void function, thus remove the redundant 'return' statement in this function. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUALAneesh Kumar K.V
With CONFIG_DEBUG_VIRTUAL=y, we can hit a BUG() if we take a hard lockup watchdog interrupt when in OPAL mode. This happens in show_instructions() if the kernel takes the watchdog NMI IPI, or any other interrupt, with MSR_IR == 0. show_instructions() updates the variable pc in the loop and the second iteration will result in BUG(). We hit the BUG_ON due the below check in __va() #define __va(x) ({ VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET); (void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET); }) Fix it by moving the check out of the loop. Also update nip so that the nip == pc check still matches. Fixes: 4dd7554a6456 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Use IS_ENABLED(), massage change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200524093822.423487-1-aneesh.kumar@linux.ibm.com
2020-06-15docs/arm64: Fix typo'd #define in sve.rstDave Martin
sve.rst describes a flag PR_SVE_SET_VL_INHERIT for the PR_SVE_SET_VL prctl, but there is no flag of this name. The flag is shared between the _GET and _SET calls, so the _SET prefix was dropped, giving the name PR_SVE_VL_INHERIT in the headers. Fix it. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Link: https://lore.kernel.org/r/1591808590-20210-2-git-send-email-Dave.Martin@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-06-15arm64: remove TEXT_OFFSET randomizationArd Biesheuvel
TEXT_OFFSET was recently changed to 0x0, in preparation for its removal at a later stage, and a warning is emitted into the kernel log when the bootloader appears to have failed to take the TEXT_OFFSET image header value into account. Ironically, this warning itself fails to take TEXT_OFFSET into account, and compares the kernel image's alignment modulo 2M against a hardcoded value of 0x0, and so the warning will trigger spuriously when TEXT_OFFSET randomization is enabled. Given the intent to get rid of TEXT_OFFSET entirely, let's fix this oversight by just removing support for TEXT_OFFSET randomization. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200615101939.634391-1-ardb@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-06-15drm/i915: work around false-positive maybe-uninitialized warningArnd Bergmann
gcc-9 gets confused by the code flow in check_dirty_whitelist: drivers/gpu/drm/i915/gt/selftest_workarounds.c: In function 'check_dirty_whitelist': drivers/gpu/drm/i915/gt/selftest_workarounds.c:492:17: error: 'rsvd' may be used uninitialized in this function [-Werror=maybe-uninitialized] I could not figure out a good way to do this in a way that gcc understands better, so initialize the variable to zero, as last resort. Fixes: aee20aaed887 ("drm/i915: Implement read-only support in whitelist selftest") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200527140526.1458215-2-arnd@arndb.de (cherry picked from commit cc649a9eafc1ef5c40db023084cb94422d08aa84) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-06-15drm/i915/pmu: avoid an maybe-uninitialized warningArnd Bergmann
Conditional spinlocks make it hard for gcc and for lockdep to follow the code flow. This one causes a warning with at least gcc-9 and higher: In file included from include/linux/irq.h:14, from drivers/gpu/drm/i915/i915_pmu.c:7: drivers/gpu/drm/i915/i915_pmu.c: In function 'i915_sample': include/linux/spinlock.h:289:3: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized] 289 | _raw_spin_unlock_irqrestore(lock, flags); \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/i915_pmu.c:288:17: note: 'flags' was declared here 288 | unsigned long flags; | ^~~~~ Split out the part between the locks into a separate function for readability and to let the compiler figure out what the logic actually is. Fixes: d79e1bd676f0 ("drm/i915/pmu: Only use exclusive mmio access for gen7") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200527140526.1458215-1-arnd@arndb.de (cherry picked from commit 6ec81b82732e2b4a5ac0853fd33919ff1ca94238) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-06-15drm/i915/gt: Incorporate the virtual engine into timeslicingChris Wilson
It was quite the oversight to only factor in the normal queue to decide the timeslicing switch priority. By leaving out the next virtual request from the priority decision, we would not timeslice the current engine if there was an available virtual request. Testcase: igt/gem_exec_balancer/sliced Fixes: 3df2deed411e ("drm/i915/execlists: Enable timeslice on partial virtual engine dequeue") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200519132046.22443-3-chris@chris-wilson.co.uk (cherry picked from commit 6ad249ba59badc7ff157d4db1f835748f0e2c9b6) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-06-15crypto: drbg - always try to free Jitter RNG instanceStephan Müller
The Jitter RNG is unconditionally allocated as a seed source follwoing the patch 97f2650e5040. Thus, the instance must always be deallocated. Reported-by: syzbot+2e635807decef724a1fa@syzkaller.appspotmail.com Fixes: 97f2650e5040 ("crypto: drbg - always seeded with SP800-90B ...") Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-06-15crypto: marvell/octeontx - Fix a potential NULL dereferenceDan Carpenter
Smatch reports that: drivers/crypto/marvell/octeontx/otx_cptvf_algs.c:132 otx_cpt_aead_callback() warn: variable dereferenced before check 'cpt_info' (see line 121) This function is called from process_pending_queue() as: drivers/crypto/marvell/octeontx/otx_cptvf_reqmgr.c 599 /* 600 * Call callback after current pending entry has been 601 * processed, we don't do it if the callback pointer is 602 * invalid. 603 */ 604 if (callback) 605 callback(res_code, areq, cpt_info); It does appear to me that "cpt_info" can be NULL so this could lead to a NULL dereference. Fixes: 10b4f09491bf ("crypto: marvell - add the Virtual Function driver for CPT") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-06-15crypto: algboss - don't wait during notifier callbackEric Biggers
When a crypto template needs to be instantiated, CRYPTO_MSG_ALG_REQUEST is sent to crypto_chain. cryptomgr_schedule_probe() handles this by starting a thread to instantiate the template, then waiting for this thread to complete via crypto_larval::completion. This can deadlock because instantiating the template may require loading modules, and this (apparently depending on userspace) may need to wait for the crc-t10dif module (lib/crc-t10dif.c) to be loaded. But crc-t10dif's module_init function uses crypto_register_notifier() and therefore takes crypto_chain.rwsem for write. That can't proceed until the notifier callback has finished, as it holds this semaphore for read. Fix this by removing the wait on crypto_larval::completion from within cryptomgr_schedule_probe(). It's actually unnecessary because crypto_alg_mod_lookup() calls crypto_larval_wait() itself after sending CRYPTO_MSG_ALG_REQUEST. This only actually became a problem in v4.20 due to commit b76377543b73 ("crc-t10dif: Pick better transform if one becomes available"), but the unnecessary wait was much older. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207159 Reported-by: Mike Gerow <gerow@google.com> Fixes: 398710379f51 ("crypto: algapi - Move larval completion into algboss") Cc: <stable@vger.kernel.org> # v3.6+ Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: Kai Lüke <kai@kinvolk.io> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-06-15crypto: caam - fix typosHeinrich Schuchardt
Fix CAAM related typos. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-06-15crypto: ccp - Fix sparse warnings in sev-devHerbert Xu
This patch fixes a bunch of sparse warnings in sev-dev where the __user marking is incorrectly handled. Reported-by: kbuild test robot <lkp@intel.com> Fixes: 7360e4b14350 ("crypto: ccp: Implement SEV_PEK_CERT_IMPORT...") Fixes: e799035609e1 ("crypto: ccp: Implement SEV_PEK_CSR ioctl...") Fixes: 76a2b524a4b1 ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT...") Fixes: d6112ea0cb34 ("crypto: ccp - introduce SEV_GET_ID2 command") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-06-15crypto: hisilicon - Cap block size at 2^31Herbert Xu
The function hisi_acc_create_sg_pool may allocate a block of memory of size PAGE_SIZE * 2^(MAX_ORDER - 1). This value may exceed 2^31 on ia64, which would overflow the u32. This patch caps it at 2^31. Reported-by: kernel test robot <lkp@intel.com> Fixes: d8ac7b85236b ("crypto: hisilicon - fix large sgl memory...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:30:11 +0000