summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-03ARM: ux500: register the tc35892 GPIO on the TVK UIBLinus Walleij
The TVK1281618 UIB has a TC35892 GPIO expander on it, which has in the past probably been confused with the GPIO expander on the older HREF plus previous to v60, which is on an entirely different part of the system with another I2C address. Register the expander in the right place. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-02ARM: ux500: split the HREF DTS files from two to fourLinus Walleij
As the device tree conversion did away with the ability to auto-detect the UIB (User Interface Board) version from attempting to read an I2C address, we now have to pass the knowledge of what UIB is mounted through the device tree. This gives rise to four possible board permutations: - HREF prior to v60, ST UIB (hrefprev60-stuib) - HREF prior to v60, TVK1281618 UIB (hrefprev60-tvk) - HREF v60 and later, ST UIB (href60plus-stuib) - HREF v60 and later, TVK1281618 UIB (hrefv60plus-tvk) Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-02ARM: ux500: split HREF UIB filesLinus Walleij
Create two different UIB (User Interface Board) include files: one per UIB simply. The include files now only handle the devices on that very UIB. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-02ARM: ux500: move TC35892 at 0x42 to hrefprev60Linus Walleij
The TC35892 was mounted as a GPIO expander on the HREF prior to v60 and not in later versions, which instead use the Nomadik GPIO directly, so move it over to the hrefprev60 DTS file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-02ARM: ux500: correct CD for micro SD on hrev60plusLinus Walleij
This correct the card detect line for the HREF v60 and later reference designs. This is connected directly to the Nomadik GPIO block, line 95 at offset 31 on the third instance. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-02ARM: ux500: fix proximity sensor buttonLinus Walleij
The proximity sensor is connected to pin AH12 on newer HREFs, that corresponds to pin offset 25 on gpio5, not gpio6. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-02ARM: ux500: correct I2C address of ambient light sensorLinus Walleij
The ambient light sensor is places at address 0x29 nothing else. This patch makes the ambient light sensor probe again. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500 enable the AB8500 gpio for all HREFsLinus Walleij
The AB8500 GPIO was only registered for the pre-v60 HREF but should be made available on all HREF variants, move the DT entry to the common file. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: add default trigger on HREF LEDLinus Walleij
This adds a heartbeat on the first LED on the ux500 HREF boards. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: delete devices-common remnantsLinus Walleij
commit f1ff5b2549990b5de080b52e3313cbb30c218853 "ARM: ux500: Stop enabling GPIOs when not booting with Device Tree" deleted devices-common.c, but did not delete the build rule from Makefile (most likely due to compiling in a dirty tree where the object file still existed so linking would complete anyway). Delete the makerule, the header file associated with this file and the remaining reference to the header. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Provide a look-up for the ARMSS clockLee Jones
The ARMSS clock is used by the newly DT enabled CPUFreq driver. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Enable CPUFreq on SnowballLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Provide a Device Tree node for CPUFreq in the DBx500Lee Jones
This is required to fetch the ARMSS clock when booting with DT. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Provide a clock lookup for the Hash driverLee Jones
The common clock framework will use the 'clock' property provided to do a clock lookup when Device Tree is enabled. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Provide a clock lookup for the Crypto driverLee Jones
The common clock framework will use the 'clock' property provided to do a clock lookup when Device Tree is enabled. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Fix trivial white-space error in the DBX500 DTSI fileLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove ATAG booting support for SnowballLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove ATAG booting support for HREFLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove ATAG booting support for U8520Lee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove ATAG booting support for MOP500Lee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Purge UIB framework when booting with ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Take out STUIB support when not booting with Device TreeLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove BU21013 ROHM TS support when booting with only ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Don't register the STMPE/SKE when booting with ATAG supportLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Delete U8500 UIB support when booting with ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Don't register Synaptics RMI4 TS when booting with ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Purge DB8500 PRCMU registration when not booting with DTLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Stop requesting the SoC device to play 'parent' roleLee Jones
There are no more devices which require left to register which require a parent. This is part of the ux500 conversion over to Device Tree only booting. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove UART support when booting without Device TreeLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Stop initialising the pinmaps when booting with ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Rip out SSP/SPI registration when not booting with Device TreeLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Do not register the PMU device if booting with ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Deactivate enablement of DMA40 during ATAG bootingLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Stop enabling GPIOs when not booting with Device TreeLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Stop registering Pinctrl when booting with ATAG supportLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Purge support for registering the RTC when booting with ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove USB support when booting using ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Rip out keypad initialisation which is no longer usedLee Jones
This is part of the ux500 conversion over to Device Tree only booting, but this stuff haven't been used for years. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Purge SDI support for ATAG bootingLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove I2C support when booting with ATAG supportLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Purge SFH7741 Proximity Sensor support when booting with ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove Light sensor Rohm BH1780GLI when booting with ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove TC35892 Flexible IO Expander when booting ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Stop passing GPIO pdata when booitng with ATAGs enabledLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Prevent CODEC platform data from being passed when booting ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Rip out Hash support when booting with ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Deactivate Crypt support when booting with ATAGsLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Purge SDI regulator support when booting with ATAGs enableLee Jones
It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Disable Snowball's CPUFreq functionality when booting with ATAGs ↵Lee Jones
enabled It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26ARM: ux500: Remove support for Snowball's Ethernet regulator when booting ↵Lee Jones
with ATAGs It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 05:32:51 +0000