| Age | Commit message (Collapse) | Author |
|---|
|
- v4l2_av1_segmentation table formatting
- incorrect member name uv_sec_strength
- incorrect struct name v4l2_av1_global_motion
- incorrect link label for v4l2_av1_loop_filter
- add max_frame_height_minus_1
- struct ordering
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Reference frame compression is a feature added in the G2 decoder to
compress frame buffers so that the bandwidth of storing/loading
reference frames can be reduced, especially with high resolution decoded
streams.
The impact of compressed frames is confirmed when using perf to monitor
the number of memory accesses with or without the compression feature.
The following command:
perf stat -a -e \
imx8_ddr0/cycles/,imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/ \
gst-launch-1.0 filesrc \
location=Jockey_3840x2160_120fps_420_8bit_HEVC_RAW.hevc ! queue ! \
h265parse ! v4l2slh265dec ! video/x-raw,format=NV12 ! fakesink
Gives us these results without the compression feature:
Performance counter stats for 'system wide':
1711300345 imx8_ddr0/cycles/
892207924 imx8_ddr0/read-cycles/
1291785864 imx8_ddr0/write-cycles/
13.760048353 seconds time elapsed
With the compression feature:
Performance counter stats for 'system wide':
274526799 imx8_ddr0/cycles/
453120194 imx8_ddr0/read-cycles/
833391434 imx8_ddr0/write-cycles/
18.257831534 seconds time elapsed
As expected the number of read/write cycles are really lower when
compression is used.
Since storing the compression data requires more memory a module
parameter named 'hevc_use_compression' is used to enable/disable
this feature and, by default, compression isn't used.
Enabling the compression feature means that the output-frames of the
decoder
are stored with a specific compression pixel-format. Since this
pixel format is unknown, this patch restrains the compression feature
usage to the cases where post-processor pixel-formats (NV12 or NV15)
are selected by the applications.
The Fluster compliance HEVC test suite score is still 141/147 with this
patch.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
"struct vb2_ops" are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
18059 3096 16 21171 52b3 drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateful.o
After:
=====
text data bss dec hex filename
18171 2968 16 21155 52a3 drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateful.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fix a smatch static checker warning on vdec_h264_req_if.c.
Which leads to a kernel crash when fb is NULL.
Fixes: 06fa5f757dc5 ("media: mtk-vcodec: vdec: support stateless H.264 decoding")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fix a smatch static checker warning on vdec_vp8_req_if.c.
Which leads to a kernel crash when fb is NULL.
Fixes: 7a7ae26fd458 ("media: mediatek: vcodec: support stateless VP8 decoding")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fix a smatch static checker warning on vdec_h264_req_multi_if.c.
Which leads to a kernel crash when fb is NULL.
Fixes: 397edc703a10 ("media: mediatek: vcodec: add h264 decoder driver for mt8186")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
When introducing the ability for drivers to indicate the minimum number
of buffers they require an application to allocate, commit 6662edcd32cc
("media: videobuf2: Add min_reqbufs_allocation field to vb2_queue
structure") also introduced a global minimum of 2 buffers. It turns out
this breaks the Renesas R-Car VSP test suite, where a test that
allocates a single buffer fails when two buffers are used.
One may consider debatable whether test suite failures without failures
in production use cases should be considered as a regression, but
operation with a single buffer is a valid use case. While full frame
rate can't be maintained, memory-to-memory devices can still be used
with a decent efficiency, and requiring applications to allocate
multiple buffers for single-shot use cases with capture devices would
just waste memory.
For those reasons, fix the regression by dropping the global minimum of
buffers. Individual drivers can still set their own minimum.
Fixes: 6662edcd32cc ("media: videobuf2: Add min_reqbufs_allocation field to vb2_queue structure")
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20240825232449.25905-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The v4l2_subdev_link_validate() helper prints a warning if the
.link_validate() operation is not implemented for video devices
connected to the subdevs. Implement the operation to silence the
warning.
Ideally validation of the link between the video device and the subdev
should be implemented in that operation. That would however break
userspace that does not configure formats on all video devices before
starting streaming. While this mode of operation may not be considered
valid by the V4L2 API specification (interpretation differ), it is
nonetheless supported by the vsp1 driver at the moment and used by at
least the vsp1 unit test suite, and possibly other userspace
applications. Removing it would be a regression.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The v4l2_subdev_link_validate() helper function is meant to be used as a
drop-in implementation of a V4L2 subdev entity .link_validate() handler.
It supports subdev-to-subdev links only, and complains if one end of the
link is not a subdev. This forces drivers that have video output devices
connected to subdevs to implement a custom .link_validate() handler,
calling v4l2_subdev_link_validate() for the subdev-to-subdev links, and
performing manual link validation for the video-to-subdev links.
Video devices embed a media entity, and therefore also have a
.link_validate() operation. For video capture devices, the operation
should be manually implemented by drivers for validate the
subdev-to-video links. For video output devices, on the other hand, that
operation is never called, as link validation is performed in the
context of the sink entity.
As a result, we end up forcing drivers to implement a custom
.link_validate() handler for subdevs connected to video output devices,
when the video devices provide an operation that could be used for that
purpose.
To improve that situation, make v4l2_subdev_link_validate() delegate
link validation to the source's .link_validate() operation when the link
source is a video device and the link sink is a subdev. This allows
broader usage of v4l2_subdev_link_validate(), and simplifies drivers by
making video device link validation easy to implement in the video
device .link_validate(), regardless of whether the video device is an
output device or a capture device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The v4l2_subdev_link_validate() function prints a one-time warning if it
gets called on a link whose source or sink is not a subdev. As links get
validated in the context of their sink, a call to the helper when the
link's sink is not a subdev indicates that the driver has set its
.link_validate() handler to v4l2_subdev_link_validate() on a non-subdev
entity, which is a clear driver bug. On the other hand, the link's
source not being a subdev indicates that the helper is used for a subdev
connected to a video output device, which is a lesser issue, if only
because this is currently common practice.
There are no drivers left in the kernel that use
v4l2_subdev_link_validate() in a context where it may get called on a
non-subdev sink. Replace the pr_warn_once() with a WARN_ON_ONCE() in
this case to make sure that new offenders won't be introduced.
A subsequent change will improve the v4l2_subdev_link_validate() helper
to properly support validating video device to subdev links.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The v4l2_subdev_link_validate() function is a helper designed to
validate links whose sink is a subdev. When called on a link whose sink
is a video device, it only prints a warning and returns. Its usage in
the sun4i_csi driver is wrong, leaving the link from the sub4i_csi
subdev to the capture video device unvalidated.
Planned improvements to the v4l2_subdev_link_validate() function will
turn the warning into an error, breaking the sun4i_csi driver. As an
interim measure, move the warning to the sun4i_csi driver in a custom
validation handler, and drop the call to the helper.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The sun4i_csi driver doesn't implement link validation for the subdev it
registers, leaving the link between the subdev and its source
unvalidated. Fix it, using the v4l2_subdev_link_validate() helper.
Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The v4l2_subdev_link_validate() function is a helper designed to
validate links whose sink is a subdev. When called on a link whose sink
is a video device, it only prints a warning and returns. As the
microchip-isc driver implements manual validate of the subdev to video
device link, we can just drop the v4l2_subdev_link_validate() to avoid
the warning.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Some SC7280-based boards crash when providing the "secure_non_pixel"
context bank, so allow only one iommu in the bindings also.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
An iommu domain is allocated in venus_firmware_init() and is attached to
core->fw.dev in the same function. Use iommu_paging_domain_alloc() to
make it explicit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240610085555.88197-10-baolu.lu@linux.intel.com
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This structures are not used, and have a single element array at the end
of them.
This fix the following cocci warnings:
drivers/media/platform/qcom/venus/hfi_helper.h:764:5-15: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
drivers/media/platform/qcom/venus/hfi_helper.h:1041:5-15: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
drivers/media/platform/qcom/venus/hfi_helper.h:1088:39-51: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
drivers/media/platform/qcom/venus/hfi_helper.h:1093:5-22: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
drivers/media/platform/qcom/venus/hfi_helper.h:1144:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
drivers/media/platform/qcom/venus/hfi_helper.h:1239:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
drivers/media/platform/qcom/venus/hfi_helper.h:1272:4-13: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
drivers/media/platform/qcom/venus/hfi_cmds.h:85:5-16: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
drivers/media/platform/qcom/venus/hfi_cmds.h:180:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
drivers/media/platform/qcom/venus/hfi_cmds.h:189:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Replace the old style single element array at the end of the struct with
a flex array.
The code does not allocate this structure, so the size change should not
be a problem.
This fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_helper.h:1233:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The single data array data[1] is only used to save the extradata_size.
Replace it with a single element field.
This fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_cmds.h:175:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Replace a single length element array with an element.
This fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_cmds.h:77:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The single element array data[1] is never used. Replace it with a
padding field of the same size.
This fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_cmds.h:146:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The single element array data[1] is never used. Replace it with a
padding field of the same size.
This fixes the following cocci error:
drivers/media/platform/qcom/venus/hfi_cmds.h:163:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
plane_info is not a typical array, the data is not contiguous:
pinfo = (void *)pinfo + sizeof(*constr) * num_planes +
2 * sizeof(u32);
Replace the single element array with a single element field.
This fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_helper.h:1009:36-46: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The struct hfi_session_get_property_pkt is always used to fetch a
single property. Make that explicit in the code and avoid a single
element array at the end of the struct.
This change fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_cmds.h:194:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This field is never used, but if we remove it we would change the size
of the struct and can lead to behavior change. Stay on the safe side by
replacing the single element array with a single element field.
This fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_helper.h:1003:43-60: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
"struct dec_bufsize_ops and "struct enc_bufsize_ops" are not modified in
this driver.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
12494 822 0 13316 3404 drivers/media/platform/qcom/venus/hfi_plat_bufs_v6.o
After:
text data bss dec hex filename
12766 566 0 13332 3414 drivers/media/platform/qcom/venus/hfi_plat_bufs_v6.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
in venus_probe, core->work is bound with venus_sys_error_handler, which is
used to handle error. The code use core->sys_err_done to make sync work.
The core->work is started in venus_event_notify.
If we call venus_remove, there might be an unfished work. The possible
sequence is as follows:
CPU0 CPU1
|venus_sys_error_handler
venus_remove |
hfi_destroy |
venus_hfi_destroy |
kfree(hdev); |
|hfi_reinit
|venus_hfi_queues_reinit
|//use hdev
Fix it by canceling the work in venus_remove.
Cc: stable@vger.kernel.org
Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
option
There is no need to compile the Rockchip specific AV1 drivers if
CONFIG_VIDEO_HANTRO_ROCKCHIP is not set.
All the driver functions are only referenced by rockchip_vpu_hw.c which
is already under this option.
Fixes: 727a400686a2 ("media: verisilicon: Add Rockchip AV1 decoder")
Fixes: d8ebe59e7b36 ("media: verisilicon: Add film grain feature to AV1 driver")
Fixes: c0d0e579db4e ("media: verisilicon: Add AV1 entropy helpers")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is no need to compile the Rockchip specific drivers if
CONFIG_VIDEO_HANTRO_ROCKCHIP is not set.
All the driver functions are only referenced by rockchip_vpu_hw.c which
is already under this option.
Fixes: c9caebd57b3a ("media: hantro: merge Rockchip platform drivers")
Fixes: c07665f99386 ("media: hantro: Add H.264 support for Rockchip VDPU2")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Some fields aren't well positioned or with an incorrect size inside the
hardware registers. Fix them.
This doesn't impact the Fluster score.
Fixes: 727a400686a2 ("media: verisilicon: Add Rockchip AV1 decoder")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use v4l2_av1_tile_info->tile_cols to get the number of columns
in the frame and make auxiliary buffer memory size computation
more accurate.
Fixes: 727a400686a2 ("media: verisilicon: Add Rockchip AV1 decoder")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The RK3588 post-processor block is able to convert 10-bit pixel-formats
into 8-bit pixel-formats.
Fixes: 003afda97c65 ("media: verisilicon: Enable AV1 decoder on rk3588")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
If the width and height are 0xffff (or close), the result of a
multiplication will overflow.
Cast to a larger type to avoid undefined behavior.
Such values are possible in CODA7, but unlikely.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 918c66fd4126 ("[media] coda: add CODA7541 decoding support")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Vicodec will ignore en/decoder commands if the CAPTURE queue is not
streaming. But this prevents CMD_STOP from being used during a dynamic
resolution change to mark the last source buffer. Since CMD_STOP is
ignored, but doesn’t fail, there is no warning that the command needs to
be resent, and CAPTURE will continue to attempt to dequeue buffers
waiting, futilely, for one with V4L2_BUF_FLAG_LAST.
Fix this problem by carrying out en/decoder commands even if CAPTURE is
not streaming.
Fixes: d17589afa9706 vicodec: improve handling of ENC_CMD_STOP/START
Reported by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Drop of_match_ptr() from mt9p031_i2c_driver and get rid of ugly CONFIG_OF
if check. This slightly increases the size of mt9p031_i2c_driver on non-OF
system and shouldn't be an issue.
Add mod_devicetable.h include.
It also allows, in case if needed, to enumerate this device via ACPI with
PRP0001 magic.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20230910160126.70122-3-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The driver has an OF match table, still, it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using i2c_get_match_data() if the devices are registered via OF/ID.
Unify the OF/ID table by using MEDIA_BUS_FMT as match data for both these
tables and replace the ID lookup table for the match data by
i2c_get_match_data() and simplifly probe() and mt9p031_init_state().
While at it, remove the trailing comma in the terminator entry for the OF
table making code robust against (theoretical) misrebases or other similar
things where the new entry goes _after_ the termination without the
compiler noticing.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20230910160126.70122-2-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the dynamic resolution support for video "capture_raw" device.
Otherwise it will capture the wrong image data if the width is
not 1920.
Fixes: e080f339c80a ("media: staging: media: starfive: camss: Add capture driver")
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240820112002.560432-1-changhuang.liang@starfivetech.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The graph walk API has been deprecated in commit eac564de0915 ("media:
mc: entity: Add entity iterator for media_pipeline") in favour of
pipelien iterators, but the MC documentation hasn't been updated
accordingly. It still documents the deprecated API as the only option.
Fix it by dropping the deprecated function, and documenting the new API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240822212445.2037-5-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit b97213a41140 ("media: v4l2-mc: Make v4l2_pipeline_pm_{get,put}
deprecated") marked the v4l2_pipeline_pm_get() and
v4l2_pipeline_pm_put() functions as deprecated, but forgot to address
the related v4l2_pipeline_link_notify() function similarly. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240822214125.3161-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Document support for the VIN module in the Renesas V4M (r8a779h0) SoC.
This device is compatible with the VIN module on the other Gen4 SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240704161620.1425409-6-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the Gen4 family compatible. This will be used instead of a SoC
specific compatible for the new Gen4 SoC V4M. Two Gen4 boards (V3U and
V4H) have already been added prior and their bindings need to be kept
for backward compatibility.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240704161620.1425409-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Gen4 SoCs V3U, V4H and V4M have a similar video capture pipelines.
The datasheets for the SoCs have small nuances around the Pre-Clip
registers ELPrC and EPPrC in three use-cases, interlaced images,
embedded data and RAW8 input. On V4H the values written to the registers
are based on odd numbers while on V4M they are even numbers, values are
based on the input image size. No board that uses these SoCs which also
have the external peripherals to test these nuances exists. Most likely
this is an issue in the datasheet.
Before adding bindings for V4M add a family compatible fallback for
Gen4. That way the driver only needs to be updated once for Gen4, and we
still have the option to fix any problems in the driver if any testable
differences between the SoCs are found.
There are already DTS files using the V3U and V4H compatibles which need
to be updated to not produce a warning for DTS checks. The driver also
needs to keep the compatible values to be backward compatible , but for
new Gen4 SoCs such as V4M we can avoid this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240704161620.1425409-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions..
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240807182610.81244-2-festevam@gmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace SET_RUNTIME_PM_OPS() with its modern RUNTIME_PM_OPS()
alternative.
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240807182610.81244-1-festevam@gmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Refactor mipi_csis_log_counters() to prevent calling dev_info() while
IRQs are disabled. This reduces crucial IRQs off time to a bare minimum.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240723060909.534584-1-matthias.fend@emfend.at
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The rzg2l-csi2 driver can be compiled as a module, but lacks
MODULE_DEVICE_TABLE() and will therefore not be loaded automatically.
Fix this.
Fixes: 51e8415e39a9 ("media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240731164935.308994-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
Extensible parameters support for the rkisp1 driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add support to the rkisp1 driver for the companding block that exists on
the i.MX8MP version of the ISP. This requires usage of the new
extensible parameters format, and showcases how the format allows for
extensions without breaking backward compatibility.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add feature flags for the dedicated black level subtraction hardware
block and for the compand hardware block. The companding feature flag is
added on its own (as opposed to "the absence of BLS") because we will
need it later for when we add support for the companding block.
Skip BLS configuration when the BLS feature flag is unset, as devices
without the dedicated BLS block cannot configure a hardware block that
doesn't exist.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To prepare for adding support for the companding block to the rkisp1
driver for the version of the ISP on the i.MX8MP, add the register
definitions for it, including relevant register field values.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Future ISP parameter blocks for i.MX8MP-specific features will not
support on Rockchip platforms as they lack the corresponding hardware.
Introduce a features mask in the extensible block handlers to indicate
which device features a block require, and ignore blocks that require
unavailable features.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
