summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-07e1000e: fix accessing to suspended deviceKonstantin Khlebnikov
This patch fixes some annoying messages like 'Error reading PHY register' and 'Hardware Erorr' and saves several seconds on reboot. Cc: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Borislav Petkov <bp@suse.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-07e1000e: fix runtime power management transitionsKonstantin Khlebnikov
This patch removes redundant actions from driver and fixes its interaction with actions in pci-bus runtime power management code. It removes pci_save_state() from __e1000_shutdown() for normal adapters, PCI bus callbacks pci_pm_*() will do all this for us. Now __e1000_shutdown() switches to D3-state only quad-port adapters, because they needs quirk for clearing false-positive error from downsteam pci-e port. pci_save_state() now called after clearing bus-master bit, thus __e1000_resume() and e1000_io_slot_reset() must set it back after restoring configuration space. This patch set get_link_status before calling pm_runtime_put() in e1000_open() to allow e1000_idle() get real link status and schedule first runtime suspend. This patch also enables wakeup for device if management mode is enabled (like for WoL) as result pci_prepare_to_sleep() would setup wakeup without special actions like custom 'enable_wakeup' sign. Cc: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Borislav Petkov <bp@suse.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-07e1000e: fix pci-device enable-counter balanceKonstantin Khlebnikov
This patch removes redundant and unbalanced pci_disable_device() from __e1000_shutdown(). pci_clear_master() is enough, device can go into suspended state with elevated enable_cnt. Bug was introduced in commit 23606cf5d1192c2b17912cb2ef6e62f9b11de133 ("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35 Cc: Bruce Allan <bruce.w.allan@intel.com> CC: Stable <stable@kernel.org> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Borislav Petkov <bp@suse.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-07fs: Limit sys_mount to only request filesystem modules (Part 2).Eric W. Biederman
Add missing MODULE_ALIAS_FS("ocfs2") how did I miss that? Remove unnecessary MODULE_ALIAS_FS("devpts") devpts can not be modular. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-07ALSA: hda - Add support of new codec ALC233Kailang Yang
It's compatible with ALC282. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07ALSA: hda/ca0132 - Avoid division by zero in dspxfr_one_seg()Xi Wang
Move the zero check `hda_frame_size_words == 0' before the modulus `buffer_size_words % hda_frame_size_words'. Also remove the redundant null check `buffer_addx == NULL'. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07ALSA: hda - check NULL pointer when creating SPDIF PCM switchMengdong Lin
If the new control cannot be created, this function will return to avoid snd_hda_ctl_add dereferencing a NULL control pointer. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07ALSA: hda - check NULL pointer when creating SPDIF controlsMengdong Lin
If the SPDIF control array cannot be reallocated, the function will return to avoid dereferencing a NULL pointer. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07Merge tag 'asoc-v3.9-rc1' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v3.9 A few driver fixes, none of them terribly dramatic.
2013-03-07Merge remote-tracking branch 'asoc/fix/wm8960' into tmpMark Brown
2013-03-07Merge remote-tracking branch 'asoc/fix/wm8350' into tmpMark Brown
2013-03-07Merge remote-tracking branch 'asoc/fix/tegra' into tmpMark Brown
2013-03-07Merge remote-tracking branch 'asoc/fix/arizona' into tmpMark Brown
2013-03-06x86, doc: Be explicit about what the x86 struct boot_params requiresPeter Jones
If the sentinel triggers, we do not want the boot loader authors to just poke it and make the error go away, we want them to actually fix the problem. This should help avoid making the incorrect change in non-compliant bootloaders. [ hpa: dropped the Documentation/x86/boot.txt hunk pending clarifications ] Signed-off-by: Peter Jones <pjones@redhat.com> Link: http://lkml.kernel.org/r/1362592823-28967-1-git-send-email-pjones@redhat.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-03-06x86: Don't clear efi_info even if the sentinel hitsJosh Boyer
When boot_params->sentinel is set, all we really know is that some undefined set of fields in struct boot_params contain garbage. In the particular case of efi_info, however, there is a private magic for that substructure, so it is generally safe to leave it even if the bootloader is broken. kexec (for which we did the initial analysis) did not initialize this field, but of course all the EFI bootloaders do, and most EFI bootloaders are broken in this respect (and should be fixed.) Reported-by: Robin Holt <holt@sgi.com> Link: http://lkml.kernel.org/r/CA%2B5PVA51-FT14p4CRYKbicykugVb=PiaEycdQ57CK2km_OQuRQ@mail.gmail.com Tested-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-03-06x86, mm: Make sure to find a 2M free block for the first mapped areaYinghai Lu
Henrik reported that his MacAir 3.1 would not boot with | commit 8d57470d8f859635deffe3919d7d4867b488b85a | Date: Fri Nov 16 19:38:58 2012 -0800 | | x86, mm: setup page table in top-down It turns out that we do not calculate the real_end properly: We try to get 2M size with 4K alignment, and later will round down to 2M, so we will get less then 2M for first mapping, in extreme case could be only 4K only. In Henrik's system it has (1M-32K) as last usable rage is [mem 0x7f9db000-0x7fef8fff]. The problem is exposed when EFI booting have several holes and it will force mapping to use PTE instead as we only map usable areas. To fix it, just make it be 2M aligned, so we can be guaranteed to be able to use large pages to map it. Reported-by: Henrik Rydberg <rydberg@euromail.se> Bisected-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/CAE9FiQX4nQ7_1kg5RL_vh56rmcSHXUi1ExrZX7CwED4NGMnHfg@mail.gmail.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-03-06x86: Fix 32-bit *_cpu_data initializersKrzysztof Mazur
The commit 27be457000211a6903968dfce06d5f73f051a217 ('x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag') removed the hlt_works_ok flag from struct cpuinfo_x86, but boot_cpu_data and new_cpu_data initializers were not changed causing setting f00f_bug flag, instead of fdiv_bug. If CONFIG_X86_F00F_BUG is not set the f00f_bug flag is never cleared. To avoid such problems in future C99-style initialization is now used. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Acked-by: Borislav Petkov <bp@suse.de> Cc: len.brown@intel.com Link: http://lkml.kernel.org/r/1362266082-2227-1-git-send-email-krzysiek@podlesie.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-03-06Btrfs: fix a mismerge in btrfs_balance()Ilya Dryomov
Raid56 merge (merge commit e942f88) had mistakenly removed a call to __cancel_balance(), which resulted in balance not cleaning up after itself after a successful finish. (Cleanup includes switching the state, removing the balance item and releasing mut_ex_op testnset lock.) Bring it back. Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-06CIFS: Fix missing of oplock_read value in smb30_values structurePavel Shilovsky
Cc: stable@vger.kernel.org Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-03-07Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next A bunch of fixes, nothing truely horrible: - Fix PCH irq handling race which resulted in missed gmbus/dp aux irqs and subsequent fallout (Paulo) - Fixup off-by-one in our hsw id table (Kenneth) - Fixup ilk rc6 support (disabled by default), regression introduced in 3.8 - g4x plane w/a from Egbert Eich - gen2/3/4 dpms suspend/standy fixes for VGA outputs from Patrik Jakobsson - Workaround dying ivb machines with less aggressive rc6 values (Stéphane Marchesin) * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Turn off hsync and vsync on ADPA when disabling crt drm/i915: Fix incorrect definition of ADPA HSYNC and VSYNC bits drm/i915: also disable south interrupts when handling them drm/i915: enable irqs earlier when resuming drm/i915: Increase the RC6p threshold. DRM/i915: On G45 enable cursor plane briefly after enabling the display plane. drm/i915: Fix Haswell/CRW PCI IDs. drm/i915: Don't clobber crtc->fb when queue_flip fails drm/i915: wait_event_timeout's timeout is in jiffies drm/i915: Fix missing variable initilization
2013-03-06cifs: don't try to unlock pagecache page after releasing itJeff Layton
We had a recent fix to fix the release of pagecache pages when cifs_writev_requeue writes fail. Unfortunately, it releases the page before trying to unlock it. At that point, the page might be gone by the time the unlock comes in. Unlock the page first before checking the value of "rc", and only then end writeback and release the pages. The page lock isn't required for any of those operations so this should be safe. Reported-by: Anton Altaparmakov <aia21@cam.ac.uk> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-03-06cifs: remove the sockopt= mount optionJeff Layton
...as promised for 3.9. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-03-06Merge branch 'master' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next into for-linus-3.9
2013-03-06cifs: Check server capability before attempting silly renameSachin Prabhu
cifs_rename_pending_delete() attempts to silly rename file using CIFSSMBRenameOpenFile(). This uses the SET_FILE_INFORMATION TRANS2 command with information level set to the passthru info-level SMB_SET_FILE_RENAME_INFORMATION. We need to check to make sure that the server support passthru info-levels before attempting the silly rename or else we will fail to rename the file. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-03-06cifs: Fix bug when checking error condition in cifs_rename_pending_delete()Sachin Prabhu
Fix check for error condition after setting attributes with CIFSSMBSetFileInfo(). Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-03-06ARM: 7667/1: perf: Fix section mismatch on armpmu_init()Stephen Boyd
WARNING: vmlinux.o(.text+0xfb80): Section mismatch in reference from the function armpmu_register() to the function .init.text:armpmu_init() The function armpmu_register() references the function __init armpmu_init(). This is often because armpmu_register lacks a __init annotation or the annotation of armpmu_init is wrong. Just drop the __init marking on armpmu_init() because armpmu_register() no longer has an __init marking. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-06ARM: 7666/1: decompressor: add -mno-single-pic-base for building the ↵Jonathan Austin
decompressor Before jumping to (position independent) C-code from the decompressor's assembler world we set-up the C environment. This setup currently does not set r9, which for arm-none-uclinux-uclibceabi toolchains is by default expected to be the PIC offset base register (IE should point to the beginning of the GOT). Currently, therefore, in order to build working kernels that use the decompressor it is necessary to use an arm-linux-gnueabi toolchain, or similar. uClinux toolchains cause a prefetch abort to occur at the beginning of the decompress_kernel function. This patch allows uClinux toolchains to build bootable zImages by forcing the -mno-single-pic-base option, which ensures that the location of the GOT is re-derived each time it is required, and r9 becomes free for use as a general purpose register. This has a small (4% in instruction terms) advantage over the alternative of setting r9 to point to the GOT before calling into the C-world. Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-06Merge branch 'pm-fixes' into fixesRafael J. Wysocki
* pm-fixes: cpufreq / intel_pstate: Do not load on VM that does not report max P state. cpufreq / intel_pstate: Fix intel_pstate_init() error path PM / QoS: Remove device PM QoS sysfs attributes at the right place PM / QoS: Fix concurrency issues and memory leaks in device PM QoS cpufreq: highbank: do not initialize array with a loop PM / OPP: improve introductory documentation cpufreq: Fix a typo in comment mailbox, pl320-ipc: remove __init from probe function
2013-03-06Merge branch 'acpi-fixes' into fixesRafael J. Wysocki
* acpi-fixes: ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type ACPI / glue: Add .match() callback to struct acpi_bus_type ACPI / porocessor: Beautify code, pr->id is u32 which is never < 0 ACPI / processor: Remove redundant NULL check before kfree ACPI / Sleep: Avoid interleaved message on errors
2013-03-06cpufreq / intel_pstate: Do not load on VM that does not report max P state.Dirk Brandewie
It seems some VMs support the P state MSRs but return zeros. Fail gracefully if we are running in this environment. References: https://bugzilla.redhat.com/show_bug.cgi?id=916833 Reported-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-06cpufreq / intel_pstate: Fix intel_pstate_init() error pathDirk Brandewie
If cpufreq_register_driver() fails just free memory that has been allocated and return. intel_pstate_exit() function is removed since we are built-in only now there is no reason for a module exit procedure. Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-06tun: add a missing nf_reset() in tun_net_xmit()Eric Dumazet
Dave reported following crash : general protection fault: 0000 [#1] SMP CPU 2 Pid: 25407, comm: qemu-kvm Not tainted 3.7.9-205.fc18.x86_64 #1 Hewlett-Packard HP Z400 Workstation/0B4Ch RIP: 0010:[<ffffffffa0399bd5>] [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP: 0018:ffff880276913d78 EFLAGS: 00010206 RAX: 50626b6b7876376c RBX: ffff88026e530d68 RCX: ffff88028d158e00 RDX: ffff88026d0d5470 RSI: 0000000000000011 RDI: 0000000000000002 RBP: ffff880276913d88 R08: 0000000000000000 R09: ffff880295002900 R10: 0000000000000000 R11: 0000000000000003 R12: ffffffff81ca3b40 R13: ffffffff8151a8e0 R14: ffff880270875000 R15: 0000000000000002 FS: 00007ff3bce38a00(0000) GS:ffff88029fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fd1430bd000 CR3: 000000027042b000 CR4: 00000000000027e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-kvm (pid: 25407, threadinfo ffff880276912000, task ffff88028c369720) Stack: ffff880156f59100 ffff880156f59100 ffff880276913d98 ffffffff815534f7 ffff880276913db8 ffffffff8151a74b ffff880270875000 ffff880156f59100 ffff880276913dd8 ffffffff8151a5a6 ffff880276913dd8 ffff88026d0d5470 Call Trace: [<ffffffff815534f7>] nf_conntrack_destroy+0x17/0x20 [<ffffffff8151a74b>] skb_release_head_state+0x7b/0x100 [<ffffffff8151a5a6>] __kfree_skb+0x16/0xa0 [<ffffffff8151a666>] kfree_skb+0x36/0xa0 [<ffffffff8151a8e0>] skb_queue_purge+0x20/0x40 [<ffffffffa02205f7>] __tun_detach+0x117/0x140 [tun] [<ffffffffa022184c>] tun_chr_close+0x3c/0xd0 [tun] [<ffffffff8119669c>] __fput+0xec/0x240 [<ffffffff811967fe>] ____fput+0xe/0x10 [<ffffffff8107eb27>] task_work_run+0xa7/0xe0 [<ffffffff810149e1>] do_notify_resume+0x71/0xb0 [<ffffffff81640152>] int_signal+0x12/0x17 Code: 00 00 04 48 89 e5 41 54 53 48 89 fb 4c 8b a7 e8 00 00 00 0f 85 de 00 00 00 0f b6 73 3e 0f b7 7b 2a e8 10 40 00 00 48 85 c0 74 0e <48> 8b 40 28 48 85 c0 74 05 48 89 df ff d0 48 c7 c7 08 6a 3a a0 RIP [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP <ffff880276913d78> This is because tun_net_xmit() needs to call nf_reset() before queuing skb into receive_queue Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This time just passing along a big batch of fixes from Johannes... For the mac80211 bits: "Here I have fixes from Ben Greear for stray work items when deleting interfaces, another idle handling fix from Felix, a fix from Marco ro a mesh PS buffering crash and I have a fix for the VHT MCS calculation in association request frames and more nl80211 feature advertising removal as well as a workaround to increase the dump size if the SKB overhead is too large. For 3.10 I already have a complete fix queued, but that also requires (simple) userspace changes." And for the iwlwifi bits: "The patches from Dor fix a bunch of calibration issues in the new MVM driver, and Emmanuel has a number of fixes there as well. Also, we decided to disable 8k A-MSDU by default, so that's in there. My own patches are addressing an issue we found with the new devices but that seems to also exist on older ones, the DMA writeback the devices do can be delayed and cause issues. The fix is unfortunately relatively large and depends on two other changes (to not be hugely conflicting), but I think it's still worth it at this point." As Johannes says, it is a bit large. But I hope it is still early enough in the cycle to make that worthwhile. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06be2net: use CSR-BAR SEMAPHORE reg for BE2/BE3Sathya Perla
The SLIPORT_SEMAPHORE register shadowed in the config-space may not reflect the correct POST stage after an EEH reset in BE2/3; it may return FW_READY state even though FW is not ready. This causes the driver to prematurely poll the FW mailbox and fail. For BE2/3 use the CSR-BAR/0xac instead. Reported-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06net: docs: document multiqueue tuntap APIJason Wang
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06Merge branch 'sfc-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller
Ben Hutchings says: ==================== Fix regressions introduced by the last set of fixes (sorry): 1. Potential deadlock when disabling TX queues. 2. RX was broken on architectures other than x86 and powerpc. I still expect to send one more bug fix for 3.9, but as it sometimes takes days to reproduce the bug it's going to take a couple of weeks of testing to be confident that it's really fixed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06sfc: Correct efx_rx_buffer::page_offset when EFX_PAGE_IP_ALIGN != 0Ben Hutchings
RX DMA buffers start at an offset of EFX_PAGE_IP_ALIGN bytes from the start of a cache line. This offset obviously needs to be included in the virtual address, but this was missed in commit b590ace09d51 ('sfc: Fix efx_rx_buf_offset() in the presence of swiotlb') since EFX_PAGE_IP_ALIGN is equal to 0 on both x86 and powerpc. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-03-06sfc: Disable soft interrupt handling during efx_device_detach_sync()Ben Hutchings
efx_device_detach_sync() locks all TX queues before marking the device detached and thus disabling further TX scheduling. But it can still be interrupted by TX completions which then result in TX scheduling in soft interrupt context. This will deadlock when it tries to acquire a TX queue lock that efx_device_detach_sync() already acquired. To avoid deadlock, we must use netif_tx_{,un}lock_bh(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-03-06drm/i915: Turn off hsync and vsync on ADPA when disabling crtPatrik Jakobsson
According to PRM we need to disable hsync and vsync even though ADPA is disabled. The previous code did infact do the opposite so we fix it. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56359 Tested-by: max <manikulin@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-03-06efivarfs: return accurate error code in efivarfs_fill_super()Matt Fleming
Joseph was hitting a failure case when mounting efivarfs which resulted in an incorrect error message, $ sudo mount -v /sys/firmware/efi/efivars mount: Cannot allocate memory triggered when efivarfs_valid_name() returned -EINVAL. Make sure we pass accurate return values up the stack if efivarfs_fill_super() fails to build inodes for EFI variables. Reported-by: Joseph Yasi <joe.yasi@gmail.com> Reported-by: Lingzhu Xiang <lxiang@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: <stable@vger.kernel.org> # v3.8 Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-06efivars: efivarfs_valid_name() should handle pstore syntaxMatt Fleming
Stricter validation was introduced with commit da27a24383b2b ("efivarfs: guid part of filenames are case-insensitive") and commit 47f531e8ba3b ("efivarfs: Validate filenames much more aggressively"), which is necessary for the guid portion of efivarfs filenames, but we don't need to be so strict with the first part, the variable name. The UEFI specification doesn't impose any constraints on variable names other than they be a NULL-terminated string. The above commits caused a regression that resulted in users seeing the following message, $ sudo mount -v /sys/firmware/efi/efivars mount: Cannot allocate memory whenever pstore EFI variables were present in the variable store, since their variable names failed to pass the following check, /* GUID should be right after the first '-' */ if (s - 1 != strchr(str, '-')) as a typical pstore filename is of the form, dump-type0-10-1-<guid>. The fix is trivial since the guid portion of the filename is GUID_LEN bytes, we can use (len - GUID_LEN) to ensure the '-' character is where we expect it to be. (The bogus ENOMEM error value will be fixed in a separate patch.) Reported-by: Joseph Yasi <joe.yasi@gmail.com> Tested-by: Joseph Yasi <joe.yasi@gmail.com> Reported-by: Lingzhu Xiang <lxiang@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: <stable@vger.kernel.org> # v3.8 Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-06efi: be more paranoid about available space when creating variablesMatthew Garrett
UEFI variables are typically stored in flash. For various reasons, avaiable space is typically not reclaimed immediately upon the deletion of a variable - instead, the system will garbage collect during initialisation after a reboot. Some systems appear to handle this garbage collection extremely poorly, failing if more than 50% of the system flash is in use. This can result in the machine refusing to boot. The safest thing to do for the moment is to forbid writes if they'd end up using more than half of the storage space. We can make this more finegrained later if we come up with a method for identifying the broken machines. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-06drm/i915: Fix incorrect definition of ADPA HSYNC and VSYNC bitsPatrik Jakobsson
Disable bits for ADPA HSYNC and VSYNC where mixed up resulting in suspend becoming standby and vice versa. Fixed by swapping their bit position. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-06iommu, x86: Add DMA remap fault reasonLi, Zhen-Hua
The number of DMA fault reasons in intel's document are from 1 to 0xD, but in dmar.c fault reason 0xD is not printed out. In this document: "Intel Virtualization Technology for Directed I/O Architecture Specification" http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf Chapter 4. Support For Device-IOTLBs Table 6. Unsuccessful Translated Requests There is fault reason for 0xD not listed in kernel: Present context-entry used to process translation request specifies blocking of Translation Requests (Translation Type (T) field value not equal to 01b). This patch adds reason 0xD as well. Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Donald Dutile <ddutile@redhat.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Hannes Reinecke <hare@suse.de> Link: http://lkml.kernel.org/r/1362537797-6034-1-git-send-email-zhen-hual@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-06benet: Wait f/w POST until timeoutGavin Shan
While PCI card faces EEH errors, reset (usually hot reset) is expected to recover from the EEH errors. After EEH core finishes the reset, the driver callback (be_eeh_reset) is called and wait the firmware to complete POST successfully. The original code would return with error once detecting failure during POST stage. That seems not enough. The patch forces the driver (be_eeh_reset) to wait the firmware completes POST until timeout, instead of returning error upon detection POST failure immediately. Also, it would improve the reliability of the EEH funtionality of the driver. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Acked-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06net/ipv4: Timestamp option cannot overflow with prespecified addressesDavid Ward
When a router forwards a packet that contains the IPv4 timestamp option, if there is no space left in the option for the router to add its own timestamp, then the router increments the Overflow value in the option. However, if the addresses of the routers are prespecified in the option, then the overflow condition cannot happen: the option is structured so that each prespecified router has a place to write its timestamp. Other routers do not add a timestamp, so there will never be a lack of space. This fix ensures that the Overflow value in the IPv4 timestamp option is not incremented when the addresses of the routers are prespecified, even if the Pointer value is greater than the Length value. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06net: reduce net_rx_action() latency to 2 HZEric Dumazet
We should use time_after_eq() to get maximum latency of two ticks, instead of three. Bug added in commit 24f8b2385 (net: increase receive packet quantum) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06net: fix new kernel-doc warnings in net coreRandy Dunlap
Fix new kernel-doc warnings in net/core/dev.c: Warning(net/core/dev.c:4788): No description found for parameter 'new_carrier' Warning(net/core/dev.c:4788): Excess function parameter 'new_carries' description in 'dev_change_carrier' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06reset nf before xmit vxlan encapsulated packetZang MingJie
We should reset nf settings bond to the skb as ipip/ipgre do. If not, the conntrack/nat info bond to the origin packet may continually redirect the packet to vxlan interface causing a routing loop. this is the scenario: VETP VXLAN Gateway /----\ /---------------\ | | | | | vx+--+vx --NAT-> eth0+--> Internet | | | | \----/ \---------------/ when there are any packet coming from internet to the vetp, there will be lots of garbage packets coming out the gateway's vxlan interface, but none actually sent to the physical interface, because they are redirected back to the vxlan interface in the postrouting chain of NAT rule, and dmesg complains: Mar 1 21:52:53 debian kernel: [ 8802.997699] Dead loop on virtual device vxlan0, fix it urgently! Mar 1 21:52:54 debian kernel: [ 8804.004907] Dead loop on virtual device vxlan0, fix it urgently! Mar 1 21:52:55 debian kernel: [ 8805.012189] Dead loop on virtual device vxlan0, fix it urgently! Mar 1 21:52:56 debian kernel: [ 8806.020593] Dead loop on virtual device vxlan0, fix it urgently! the patch should fix the problem Signed-off-by: Zang MingJie <zealot0630@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 15:31:39 +0000