| Age | Commit message (Collapse) | Author |
|---|
|
Remove redundant/duplicate line.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20231027152830.1269895-2-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Utilize the integrated 10-bit ADC in Max5970/Max5978 to enable voltage
and current monitoring. This feature is seamlessly integrated through
the hwmon subsystem.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231027152830.1269895-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add PMC8380 compatibles for PMIC found in SC8380XP platform.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231025135550.13162-2-quic_sibis@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support from RPMH regulators found in PMC8380 for SC8380XP platform.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231025135550.13162-3-quic_sibis@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add interrupt support for under-voltage notification. This functionality
can be used on systems capable to detect under-voltage state and having
enough capacity to let the SoC do some emergency preparation.
This change enforce default policy to shutdown system as soon as
interrupt is triggered.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231025084614.3092295-6-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add under-voltage interrupt support. This can be used with simple
regulators having no other way to communicate an under-voltage event
except as by toggling some GPIO line.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231025084614.3092295-4-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the Dialog Semiconductor DA9210 Multi-Phase 12A DC-DC Buck
Converter Device Tree binding documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/bfd1cf9d620a8229f5a5e62e6fe9e59c153d0830.1698051619.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add ADI MAX77503 buck converter devicetree document.
Signed-off-by: Gokhan Celik <gokhan.celik@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/fb2cb32219eb1a5f85169d6c85cd2c057c5bb4a9.1698000185.git.gokhan.celik@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add ADI MAX77503 buck converter driver support.
Signed-off-by: Gokhan Celik <gokhan.celik@analog.com>
Link: https://lore.kernel.org/r/10bb3894fea31a098d768e346c8721e730d7cb21.1698000185.git.gokhan.celik@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231017203442.2699322-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use preferred i2c_get_match_data() instead of of_match_device() to get
the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231017203429.2699039-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If probe is reached, we've already matched the device and in the case of
DT matching, the struct device_node pointer will be set. Therefore, there
is no need to call of_match_device() in probe.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231017203507.2699826-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct da9063_regulators.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Support Opensource <support.opensource@diasemi.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175207.work.576-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct da9062_regulators.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Support Opensource <support.opensource@diasemi.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175330.work.066-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DT bindings for MT6366 regulator defines the supply names for the
PMIC.
Add support for them by adding .supply_name field settings for each
regulator. The buck regulators each have their own supply whose name
can be derived from the regulator name. The LDOs have shared supplies.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-12-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When support for the MT6366 PMIC regulators was added, it was assumed
that it had the same functionality as MT6358. In reality there are
differences. A few regulators have different ranges, or were renamed
and repurposed, or removed altogether.
Add the 3 regulators that were missing from the original submission.
These are added for completeness. VSRAM_CORE is not used in existing
projects. VM18 and VMDDR feed DRAM related consumers, and are not used
in-kernel.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-11-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The VCN18 regulator on the MT6366 (only) actually has a wide
configurable range of voltages, even though its name suggests a fixed
output voltage.
Convert it from a fixed LDO to a configurable LDO. Its range of settings
is the same as the VM18 regulator, which is missing and will be added in
a subsequent patch.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-10-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The new MT6366 binding does away with the type prefix ("buck_", "ldo_")
in the regulator node names. This better matches the PMIC pin names.
Remaining underscores in names are also replaced with hyphens.
Drop the type prefixes and replace remaining underscores to match the
MT6366 binding.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-9-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DT bindings for MT6358 regulator now defines the supply names for the
PMIC.
Add support for them by adding .supply_name field settings for each
regulator.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-8-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The (undocumented) possible values for the buck operating modes on the
MT6358 are the same as those on the MT6397, both for the device tree
bindings and the actual hardware register values.
Reuse the macros for the MT6397 PMIC in the MT6358 regulator driver by
including the mt6397-regulator.h binding header and replacing the
existing macros. This aligns it with other PMIC.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MediaTek MT6366 PMIC is similar to the MT6358 PMIC. It is designed
to be paired with the MediaTek MT8186 SoC. It has 9 buck regulators and
29 LDO regulators, not counting ones that feed internally and basically
have no controls. The regulators are named after their intended usage
for the SoC and system design, thus not named generically as ldoX or
dcdcX, but as vcn33 or vgpu.
The differences compared to the MT6358 are minimal:
- Regulators removed: VCAMA1, VCAMA2, VCAMD, VCAMIO, VLDO28
- Regulators added: VM18, VMDDR, VSRAM_CORE
Both PMIC models contain a chip ID register at the same address that
can be used to differentiate the actual model. Thus, even though the
MT6366 is not fully backward compatible with the MT6358, it still falls
back on the MT6358 compatible string. It is up to the implementation
to use the chip ID register as a probing mechanism.
Update the MT6358 regulator binding and add entries for all the MT6366's
regulators and their supplies. The regulator node names follow a cleaned
up style without type prefixes and with underscores replaced with hyphens.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
[wens@chromium.org: major rework and added commit message]
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-6-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MT6358 PMIC has various regulator power supply pins that should be
supplied from external power sources or routed from one of its outputs.
Add these regulator supplies to the binding. The names are the actual
names from the datasheet, with hyphens replacing underscores.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MT6358 PMIC allows changing operating modes for the buck regulators,
but not the LDOs. Existing device trees and the Linux implementation
already utilize this through the standard regulator-allowed-modes
property.
The values currently used in existing device trees are simply raw
numbers. The values in the Linux driver are matching numbers defined
with macros denoting the two supported modes. Turns out these two
modes are common across parts of the larger MT63xx PMIC family. The
MT6397 regulator binding already has macros for the two modes, with
matching numbers.
Codify the supported values for regulator-allowed-modes for the MT6358
in the device tree binding: 0 and 1 are supported for buck regulators,
and the property should not be present for LDO regulators. Users should
use the dt-bindings/regulator/mediatek,mt6397-regulator.h header for
the macros, instead of using raw numbers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert this from the old style text based binding to the new DT schema
style. This will make adding the MT6366 portion easier.
The examples have been trimmed down considerably, and the remaining
entries now match what is seen in actual device trees, minus some
properties that aren't covered by the bindings yet, or don't make
sense on their own.
The original submitter seems to have left MediaTek, so instead the
submitter and maintainer for the MT6366 binding is listed as the
maintainer here.
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the necessary definitions for the PMA8084 PMIC to the
qcom_spmi-regulator driver to allow reading the actual voltages applied
to the hardware at runtime. This is mainly intended for debugging since
the regulators are usually controlled through the RPM firmware (via
qcom_smd-regulator).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-6-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the qcom,pma8084-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pma8084-regulators compatible).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-5-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the necessary definitions for the PM8019 PMIC to the
qcom_spmi-regulator driver to allow reading the actual voltages applied
to the hardware at runtime. This is mainly intended for debugging since
the regulators are usually controlled through the RPM firmware (via
qcom_smd-regulator).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-4-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the qcom,pm8019-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pm8019-regulators compatible).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-3-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the necessary definitions for the PM8909 PMIC to the
qcom_spmi-regulator driver to allow reading the actual voltages applied
to the hardware at runtime. This is mainly intended for debugging since
the regulators are usually controlled through the RPM firmware (via
qcom_smd-regulator).
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-2-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the qcom,pm8909-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pm8909-regulators compatible).
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-1-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Chen-Yu Tsai <wenst@chromium.org>:
Hi,
This is v3 of the remainder of the MT6358 regulator driver cleanup
and improvement series. v1 can be found here [1]; v2 is here [2].
Changes since v2:
- Merged patches dropped
- Fixed up pickable linear ranges' selector values
- Collected tags
- Patch adding missing regulator definitions squashed into patch using
the definitions; recommended by Krzysztof on my MT6366 series.
- Remaining dts patch split out to be sent separately
Changes since v1:
- Merged patches dropped
- Added patch to move VCN33 regulator status sync after ID check
- Added patch to fix VCN33 sync fail error message
- Added patch to add missing register definitions
Various discrepancies were found while preparing to upstream MT8186
device trees, which utilize the MT6366 PMIC, that is also covered by
this driver.
Patches 1~3 should go through the regulator tree, and patch 4 through
the soc/mediatek tree.
** Note: patch 2 needs an ack from Lee for the mfd header change.
This v3 series can be seen as two parts. v1 had three parts, but one
part was fully merged, and then v2 gained another cleanup. v3 drops
the "fixing bogus regulators" part: driver changes are fully merged
and device tree change will be sent separately.
Part 1 - Robust chip ID checking (patch 1)
Angelo suggested making the driver fail to probe if an unexpected chip
ID was found. Patch 1 implements this.
Part 2 - Output voltage fine tuning support (patches 2, 3)
Many of the LDOs on these PMIC support an extra level of output voltage
fine tuning. Most default to no offset, but a couple have a non-zero
offset by default. Previously this was unaccounted for in the driver and
device tree constraints. On the outputs with non-zero offset, this ends
up becoming a discrepancy between the device tree and actual hardware.
These two patches adds support for this second level of tuning, modeled
as bunch of linear ranges. While it's unlikely we need this level of
control, it's nice to be able to read back the accurate hardware
settings.
Please have a look.
Thanks
ChenYu
[1] https://lore.kernel.org/linux-arm-kernel/20230609083009.2822259-1-wenst@chromium.org/
[2] https://lore.kernel.org/linux-mediatek/20230721082903.2038975-1-wenst@chromium.org/
Chen-Yu Tsai (3):
regulator: mt6358: Fail probe on unknown chip ID
regulator: mt6358: Add output voltage fine tuning to fixed regulators
regulator: mt6358: Add output voltage fine tuning to variable LDOs
drivers/regulator/mt6358-regulator.c | 304 ++++++++++++---------------
include/linux/mfd/mt6358/registers.h | 6 +
2 files changed, 144 insertions(+), 166 deletions(-)
--
2.42.0.283.g2d96d420d3-goog
|
|
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230925212658.1975419-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some of the LDO regulators in the MT6358/MT6366 have sparsely populated
voltage tables, supported by custom get/set operators. While it works,
it requires more code and an extra field to store the lookup table.
These LDOs also have fine voltage calibration settings that can slightly
boost the output voltage from 0 mV to 100 mV, in 10 mV increments.
These combined could be modeled as a pickable set of linear ranges. The
coarse voltage setting is modeled as the range selector, while each
range has 11 selectors, starting from the range's base voltage, up to
+100 mV, in 10mV increments.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230913082919.1631287-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "fixed" LDO regulators found on the MT6358 and MT6366 PMICs have
either no voltage selection register, or only one valid setting.
However these do have a fine voltage calibration setting that can
slightly boost the output voltage from 0 mV to 100 mV, in 10 mV
increments.
Add support for this by changing these into linear range regulators.
Some register definitions that are missing are also added.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230913082919.1631287-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MT6358 and MT6366 PMICs, and likely many others from MediaTek, have
a chip ID register, making the chip semi-discoverable.
The driver currently supports two PMICs and expects to be probed on one
or the other. It does not account for incorrect mfd driver entries or
device trees. While these should not happen, if they do, it could be
catastrophic for the device. The driver should be sure the hardware is
what it expects.
Make the driver fail to probe if the chip ID presented is not a known
one.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: f0e3c6261af1 ("regulator: mt6366: Add support for MT6366 regulator")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230913082919.1631287-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix EL2 Stage-1 MMIO mappings where a random address was used
- Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
x86:
- Fixes for TSC_AUX virtualization
- Stop zapping page tables asynchronously, since we don't zap them as
often as before"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX
KVM: SVM: Fix TSC_AUX virtualization setup
KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway
KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously
KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()
KVM: x86/mmu: Open code leaf invalidation from mmu_notifier
KVM: riscv: selftests: Selectively filter-out AIA registers
KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-list
RISC-V: KVM: Fix riscv_vcpu_get_isa_ext_single() for missing extensions
RISC-V: KVM: Fix KVM_GET_REG_LIST API for ISA_EXT registers
KVM: selftests: Assert that vasprintf() is successful
KVM: arm64: nvhe: Ignore SVE hint in SMCCC function ID
KVM: arm64: Properly return allocated EL2 VA from hyp_alloc_private_va_range()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the "bytes" output of the per_cpu stat file
The tracefs/per_cpu/cpu*/stats "bytes" was giving bogus values as the
accounting was not accurate. It is suppose to show how many used
bytes are still in the ring buffer, but even when the ring buffer was
empty it would still show there were bytes used.
- Fix a bug in eventfs where reading a dynamic event directory (open)
and then creating a dynamic event that goes into that diretory screws
up the accounting.
On close, the newly created event dentry will get a "dput" without
ever having a "dget" done for it. The fix is to allocate an array on
dir open to save what dentries were actually "dget" on, and what ones
to "dput" on close.
* tag 'trace-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Remember what dentries were created on dir open
ring-buffer: Fix bytes info in per_cpu buffer stats
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of regression fixes, bug fixes, and some small cleanups
to the Compute Express Link code.
The regressions arrived in the v6.5 dev cycle and missed the v6.6
merge window due to my personal absences this cycle. The most
important fixes are for scenarios where the CXL subsystem fails to
parse valid region configurations established by platform firmware.
This is important because agreement between OS and BIOS on the CXL
configuration is fundamental to implementing "OS native" error
handling, i.e. address translation and component failure
identification.
Other important fixes are a driver load error when the BIOS lets the
Linux PCI core handle AER events, but not CXL memory errors.
The other fixex might have end user impact, but for now are only known
to trigger in our test/emulation environment.
Summary:
- Fix multiple scenarios where platform firmware defined regions fail
to be assembled by the CXL core.
- Fix a spurious driver-load failure on platforms that enable OS
native AER, but not OS native CXL error handling.
- Fix a regression detecting "poison" commands when "security"
commands are also defined.
- Fix a cxl_test regression with the move to centralize CXL port
register enumeration in the CXL core.
- Miscellaneous small fixes and cleanups"
* tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Annotate struct cxl_cxims_data with __counted_by
cxl/port: Fix cxl_test register enumeration regression
cxl/region: Refactor granularity select in cxl_port_setup_targets()
cxl/region: Match auto-discovered region decoders by HPA range
cxl/mbox: Fix CEL logic for poison and security commands
cxl/pci: Replace host_bridge->native_aer with pcie_aer_is_native()
PCI/AER: Export pcie_aer_is_native()
cxl/pci: Fix appropriate checking for _OSC while handling CXL RAS registers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an invalid usage of __free(kfree) leading to kfreeing an
ERR_PTR()
- fix an irq domain leak in gpio-tb10x
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix an invalid __free() usage
gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()
MAINTAINERS: gpio-regmap: make myself a maintainer of it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 10 of which pertain to post-6.5 issues. The other three
are cc:stable"
* tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: nommu: fix empty /proc/<pid>/maps
filemap: add filemap_map_order0_folio() to handle order0 folio
proc: nommu: /proc/<pid>/maps: release mmap read lock
mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
pidfd: prevent a kernel-doc warning
argv_split: fix kernel-doc warnings
scatterlist: add missing function params to kernel-doc
selftests/proc: fixup proc-empty-vm test after KSM changes
revert "scripts/gdb/symbols: add specific ko module load command"
selftests: link libasan statically for tests with -fsanitize=address
task_work: add kerneldoc annotation for 'data' argument
mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list
sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning
|
|
Pull smb client fixes from Steve French:
"Six smb3 client fixes, including three for stable, from the SMB
plugfest (testing event) this week:
- Reparse point handling fix (found when investigating dir
enumeration when fifo in dir)
- Fix excessive thread creation for dir lease cleanup
- UAF fix in negotiate path
- remove duplicate error message mapping and fix confusing warning
message
- add dynamic trace point to improve debugging RDMA connection
attempts"
* tag '6.6-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix confusing debug message
smb: client: handle STATUS_IO_REPARSE_TAG_NOT_HANDLED
smb3: remove duplicate error mapping
cifs: Fix UAF in cifs_demultiplex_thread()
smb3: do not start laundromat thread when dir leases disabled
smb3: Add dynamic trace points for RDMA (smbdirect) reconnect
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of I2C driver fixes. Mostly fixing resource leaks or sanity
checks"
* tag 'i2c-for-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Correct return value check for xiic_reinit()
i2c: mux: gpio: Add missing fwnode_handle_put()
i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()
i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
i2c: i801: unregister tco_pdev in i801_probe() error path
|
|
The code was accidentally mixing new and old style macros, update the
macros used to remove an unused function warning whilst building with
no PM enabled in the config.
Fixes: ace6d1448138 ("mfd: cs42l43: Add support for cs42l43 core driver")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/all/20230822114914.340359-1-ckeepax@opensource.cirrus.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix lockdep, fix a boot failure, fix some build warnings, fix document
links, and some cleanups"
* tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN/LoongArch: Update the links of ABI
docs/LoongArch: Update the links of ABI
LoongArch: Don't inline kasan_mem_to_shadow()/kasan_shadow_to_mem()
kasan: Cleanup the __HAVE_ARCH_SHADOW_MAP usage
LoongArch: Set all reserved memblocks on Node#0 at initialization
LoongArch: Remove dead code in relocate_new_kernel
LoongArch: Use _UL() and _ULL()
LoongArch: Fix some build warnings with W=1
LoongArch: Fix lockdep static memory detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix potential string buffer overflow in hypervisor user-defined
certificates handling
- Update defconfigs
* tag 's390-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cert_store: fix string length handling
s390: update defconfigs
|
|
Pull iomap fixes from Darrick Wong:
- Return EIO on bad inputs to iomap_to_bh instead of BUGging, to deal
less poorly with block device io racing with block device resizing
- Fix a stale page data exposure bug introduced in 6.6-rc1 when
unsharing a file range that is not in the page cache
* tag 'iomap-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: convert iomap_unshare_iter to use large folios
iomap: don't skip reading in !uptodate folios when unsharing a range
iomap: handle error conditions more gracefully in iomap_to_bh
|
|
HEAD
KVM/riscv fixes for 6.6, take #1
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
|
|
When the TSC_AUX MSR is virtualized, the TSC_AUX value is swap type "B"
within the VMSA. This means that the guest value is loaded on VMRUN and
the host value is restored from the host save area on #VMEXIT.
Since the value is restored on #VMEXIT, the KVM user return MSR support
for TSC_AUX can be replaced by populating the host save area with the
current host value of TSC_AUX. And, since TSC_AUX is not changed by Linux
post-boot, the host save area can be set once in svm_hardware_enable().
This eliminates the two WRMSR instructions associated with the user return
MSR support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <d381de38eb0ab6c9c93dda8503b72b72546053d7.1694811272.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The checks for virtualizing TSC_AUX occur during the vCPU reset processing
path. However, at the time of initial vCPU reset processing, when the vCPU
is first created, not all of the guest CPUID information has been set. In
this case the RDTSCP and RDPID feature support for the guest is not in
place and so TSC_AUX virtualization is not established.
This continues for each vCPU created for the guest. On the first boot of
an AP, vCPU reset processing is executed as a result of an APIC INIT
event, this time with all of the guest CPUID information set, resulting
in TSC_AUX virtualization being enabled, but only for the APs. The BSP
always sees a TSC_AUX value of 0 which probably went unnoticed because,
at least for Linux, the BSP TSC_AUX value is 0.
Move the TSC_AUX virtualization enablement out of the init_vmcb() path and
into the vcpu_after_set_cpuid() path to allow for proper initialization of
the support after the guest CPUID information has been set.
With the TSC_AUX virtualization support now in the vcpu_set_after_cpuid()
path, the intercepts must be either cleared or set based on the guest
CPUID input.
Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4137fbcb9008951ab5f0befa74a0399d2cce809a.1694811272.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
