| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- An ARM-relevant fix to not free default RMIDs of a resource control
group
- A randconfig build fix for the VMware virtual GPU driver
* tag 'x86_urgent_for_v6.10_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Don't try to free nonexistent RMIDs
drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Prevent use-after-free in 64-bit KVM VFIO
- Add generated Power8 crypto asm to .gitignore
Thanks to Al Viro and Nathan Lynch.
* tag 'powerpc-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group()
powerpc/crypto: Add generated P8 asm to .gitignore
|
|
This fixes filesystem size not changing on device removal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
TC queues needs to be correctly updated when the number of queues on
a VSI is reconfigured, so netdev's queue and TC settings will be
dynamically adjusted and could accurately represent the underlying
hardware state after changes to the VSI queue counts.
Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IEEE1588(ptp) is optional feature for network. Remove it from required
list to fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: ethernet@f0000: 'ptp-timer' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enguerrand de Ribaucourt says:
====================
Handle new Microchip KSZ 9897 Errata
These patches implement some suggested workarounds from the Microchip KSZ 9897
Errata [1].
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf
---
v7:
- use dev_crit_once instead of dev_crit_ratelimited
- add a comment to help users understand the consequences of half-duplex errors
v6: https://lore.kernel.org/netdev/20240614094642.122464-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
- remove KSZ9897 phy_id workaround (was a configuration issue)
- use macros for checking link down in monitoring function
- check if VLAN is enabled before monitoring resources
v5: https://lore.kernel.org/all/20240604092304.314636-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
- use macros for bitfields
- rewrap comments
- check ksz_pread* return values
- fix spelling mistakes
- remove KSZ9477 suspend/resume deletion patch
v4: https://lore.kernel.org/all/20240531142430.678198-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
- Rebase on net/main
- Add Fixes: tags to the patches
- reverse x-mas tree order
- use pseudo phy_id instead of match_phy_device
v3: https://lore.kernel.org/all/20240530102436.226189-1-enguerrand.de-ribaucourt@savoirfairelinux.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The errata DS80000754 recommends monitoring potential faults in
half-duplex mode for the KSZ9477 family.
half-duplex is not very common so I just added a critical message
when the fault conditions are detected. The switch can be expected
to be unable to communicate anymore in these states and a software
reset of the switch would be required which I did not implement.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Errata DS80000758 states that carrier sense back pressure mode can cause
link down issues in 100BASE-TX half duplex mode. The datasheet also
recommends to always use the collision based back pressure mode.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Woojung Huh <Woojung.huh@microchip.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PHY_ID_KSZ9477 was supported but not added to the device table passed to
MODULE_DEVICE_TABLE.
Fixes: fc3973a1fa09 ("phy: micrel: add Microchip KSZ 9477 Switch PHY support")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Not all PSE attributes are used for the pse-set netlink command.
Select only the ones used by ethtool.
Fixes: f8586411e40e ("netlink: specs: Expand the pse netlink command with PoE interface")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The debug code relies on btree_trans_list being ordered so that it can
resume on subsequent calls or lock restarts.
However, it was using trans->locknig_wait.task.pid, which is incorrect
since btree_trans objects are cached and reused - typically by different
tasks.
Fix this by switching to pointer order, and also sort them lazily when
required - speeding up the btree_trans_get() fastpath.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
debug.c was using closure_get() on a different thread's closure where
the we don't know if the object being refcounted is alive.
We keep btree_trans objects on a list so they can be printed by debug
code, and because it is cost prohibitive to touch the btree_trans list
every time we allocate and free btree_trans objects, cached objects are
also on this list.
However, we do not want the debug code to see cached but not in use
btree_trans objects - critically because the btree_paths array will have
been freed (if it was reallocated).
closure_get() is also incorrect to use when that get may race with it
hitting zero, i.e. we must already have a ref on the object or know the
ref can't currently hit 0 for other reasons (as used in the cycle
detector).
to fix this, use the previously introduced closure_get_not_zero(),
closure_return_sync(), and closure_init_stack_release(); the debug code
now can only take a ref on a trans object if it's alive and in use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Provide new primitives for solving a lifetime issue with bcachefs
btree_trans objects.
closure_sync_return(): like closure_sync(), wait synchronously for any
outstanding gets. like closure_return, the closure is considered
"finished" and the ref left at 0.
closure_get_not_zero(): get a ref on a closure if it's alive, i.e. the
ref is not zero.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_deadlock_to_text() searches the list of btree transactions to find
a deadlock - when it finds one it's done; it's not like other *_read()
functions that's printing each object.
Factor out btree_deadlock_to_text() to make this clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were grabbing the sequence number before unlock incremented it - fix
this by moving the increment to seqmutex_lock() (so the seqmutex_relock()
failure path skips the mutex_trylock()), and returning the sequence
number from unlock(), to make the API simpler and safer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a PCI device is removed during eeh_pe_report_edev(), edev->pdev
will change and can cause a crash, hold the PCI rescan/remove lock
while taking a copy of edev->pdev->bus.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240617140240.580453-1-ganeshgr@linux.ibm.com
|
|
Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-*
results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as
shown below.
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc
scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse
CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 #85
Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries
NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8
REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e
CFAR: c0000000001fdc80 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0
LR [c0000000005d23d0] usercopy_abort+0x74/0xb0
Call Trace:
usercopy_abort+0x74/0xb0 (unreliable)
__check_heap_object+0xf8/0x120
check_heap_object+0x218/0x240
__check_object_size+0x84/0x1a4
dtl_file_read+0x17c/0x2c4
full_proxy_read+0x8c/0x110
vfs_read+0xdc/0x3a0
ksys_read+0x84/0x144
system_call_exception+0x124/0x330
system_call_vectored_common+0x15c/0x2ec
--- interrupt: 3000 at 0x7fff81f3ab34
Commit 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0")
requires that only whitelisted areas in slab/slub objects can be copied to
userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY.
Dtl contains hypervisor dispatch events which are expected to be read by
privileged users. Hence mark this safe for user access.
Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the
entire object.
Co-developed-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Anjali K <anjalik@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240614173844.746818-1-anjalik@linux.ibm.com
|
|
According to the code logic, when the kernel is loaded at address 0, no
copying operation should be performed, but it is currently being done.
This patch fixes the issue where the kernel code was incorrectly
duplicated to address 0 when booting from address 0.
Fixes: b270bebd34e3 ("powerpc/64s: Run at the kernel virtual address earlier in boot")
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Jinglin Wen <jinglin.wen@shingroup.cn>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240620024150.14857-1-jinglin.wen@shingroup.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This pull request fixes the paths of the dt-schema to their
complete locations for the ChromeOS EC tunnel driver and the
Atmel at91sam drivers.
Additionally, the OpenCores driver receives a fix for an issue
that dates back to version 2.6.18. Specifically, the interrupts
need to be acknowledged (clearing all pending interrupts) after
enabling the core.
|
|
Pull rust fix from Miguel Ojeda:
- Avoid unused import warning in 'rusttest'.
* tag 'rust-fixes-6.10' of https://github.com/Rust-for-Linux/linux:
rust: avoid unused import warning in `rusttest`
|
|
This fixes incorrect/missign checking of strndup_user() returns.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver specific fixes for incorrect device descriptions, plus a
fix for a missing symbol export which causes build failures for some
newly added drivers in other trees"
* tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
regulator: bd71815: fix ramp values
regulator: core: Fix modpost error "regulator_get_regmap" undefined
regulator: tps6594-regulator: Fix the number of irqs for TPS65224 and TPS6594
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A number of fixes that have built up for SPI, a bunch of driver
specific ones including an unfortunate revert of an optimisation for
the i.MX driver which was causing issues with some configurations,
plus a couple of core fixes for the rarely used octal mode and for a
bad interaction between multi-CS support and target mode"
* tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
spi: Fix SPI slave probe failure
spi: Fix OCTAL mode support
spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()
spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz
spi: cs42l43: Correct SPI root clock speed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix crashes triggered by administrative operations on the server
* tag 'nfsd-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: grab nfsd_mutex in nfsd_nl_rpc_status_get_dumpit()
nfsd: fix oops when reading pool_stats before server is started
|
|
Pull xfs fix from Chandan Babu:
- Fix assertion failure due to a race between unlink and cluster buffer
instantiation.
* tag 'xfs-6.10-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix unlink vs cluster buffer instantiation race
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of (mostly boring) fixes for syzbot bugs and rare(r) CI bugs.
The LRU_TIME_BITS fix was slightly more involved; we only have 48 bits
for the LRU position (we would prefer 64), so wraparound is possible
for the cached data LRUs on a filesystem that has done sufficient
(petabytes) reads; this is now handled.
One notable user reported bugfix, where we were forgetting to
correctly set the bucket data type, which should have been
BCH_DATA_need_gc_gens instead of BCH_DATA_free; this was causing us to
go emergency read-only on a filesystem that had seen heavy enough use
to see bucket gen wraparoud.
We're now starting to fix simple (safe) errors without requiring user
intervention - i.e. a small incremental step towards full self
healing.
This is currently limited to just certain allocation information
counters, and the error is still logged in the superblock; see that
patch for more information. ("bcachefs: Fix safe errors by default")"
* tag 'bcachefs-2024-06-22' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Move the ei_flags setting to after initialization
bcachefs: Fix a UAF after write_super()
bcachefs: Use bch2_print_string_as_lines for long err
bcachefs: Fix I_NEW warning in race path in bch2_inode_insert()
bcachefs: Replace bare EEXIST with private error codes
bcachefs: Fix missing alloc_data_type_set()
closures: Change BUG_ON() to WARN_ON()
bcachefs: fix alignment of VMA for memory mapped files on THP
bcachefs: Fix safe errors by default
bcachefs: Fix bch2_trans_put()
bcachefs: set_worker_desc() for delete_dead_snapshots
bcachefs: Fix bch2_sb_downgrade_update()
bcachefs: Handle cached data LRU wraparound
bcachefs: Guard against overflowing LRU_TIME_BITS
bcachefs: delete_dead_snapshots() doesn't need to go RW
bcachefs: Fix early init error path in journal code
bcachefs: Check for invalid btree IDs
bcachefs: Fix btree ID bitmasks
bcachefs: Fix shift overflow in read_one_super()
bcachefs: Fix a locking bug in the do_discard_fast() path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- We currently enable DIPM (device initiated power management) in the
device (using a SET FEATURES call to the device), regardless if the
HBA supports any LPM states or not. It seems counter intuitive, and
potentially dangerous to enable a device side feature, when the HBA
does not have the corresponding support. Thus, make sure that we do
not enable DIPM if the HBA does not support any LPM states.
* tag 'ata-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Do not enable LPM if no LPM states are supported by the HBA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Three fixes for the pwm-stm32 driver.
The first patch prevents an integer wrap-around for small periods. In
the second patch the calculation of the prescaler is fixed which
resulted in values for the ARR register that don't fit into the
corresponding register bit field. The last commit improves an error
message that was wrongly copied from another error path"
* tag 'pwm/for-6.10-rc5-fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix error message to not describe the previous error path
pwm: stm32: Fix calculation of prescaler
pwm: stm32: Refuse too small period requests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci firmware
driver and SD card support on the milkv duo riscv board"
* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: psci: Fix return value from psci_system_suspend()
riscv: dts: sophgo: disable write-protection for milkv duo
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some hw breakpoint fixes, an objtool build warnging fix, and a trivial
cleanup"
* tag 'loongarch-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Remove an unneeded semicolon
LoongArch: Fix multiple hardware watchpoint issues
LoongArch: Trigger user-space watchpoints correctly
LoongArch: Fix watchpoint setting error
LoongArch: Only allow OBJTOOL & ORC unwinder if toolchain supports -mthin-add-sub
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
|
|
"Failed to lock the clock" is an appropriate error message for
clk_rate_exclusive_get() failing, but not for the clock running too
fast for the driver's calculations.
Adapt the error message accordingly.
Fixes: d44d635635a7 ("pwm: stm32: Fix for settings using period > UINT32_MAX")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/285182163211203fc823a65b180761f46e828dcb.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
A small prescaler is beneficial, as this improves the resolution of the
duty_cycle configuration. However if the prescaler is too small, the
maximal possible period becomes considerably smaller than the requested
value.
One situation where this goes wrong is the following: With a parent
clock rate of 208877930 Hz and max_arr = 0xffff = 65535, a request for
period = 941243 ns currently results in PSC = 1. The value for ARR is
then calculated to
ARR = 941243 * 208877930 / (1000000000 * 2) - 1 = 98301
This value is bigger than 65535 however and so doesn't fit into the
respective register field. In this particular case the PWM was
configured for a period of 313733.4806027616 ns (with ARR = 98301 &
0xffff). Even if ARR was configured to its maximal value, only period =
627495.6861167669 ns would be achievable.
Fix the calculation accordingly and adapt the comment to match the new
algorithm.
With the calculation fixed the above case results in PSC = 2 and so an
actual period of 941229.1667195285 ns.
Fixes: 8002fbeef1e4 ("pwm: stm32: Calculate prescaler with a division instead of a loop")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b4d96b79917617434a540df45f20cb5de4142f88.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
There are 2 types of outstanding tx skb's:
Type 1: Packets that are sitting in the drivers ind_buff that are
waiting to be batch sent to the NIC. During a device reset, these are
freed with a call to ibmvnic_tx_scrq_clean_buffer()
Type 2: Packets that have been sent to the NIC and are awaiting a TX
completion IRQ. These are free'd during a reset with a call to
clean_tx_pools()
During any reset which requires us to free the tx irq, ensure that the
Type 2 skb references are freed. Since the irq is released, it is
impossible for the NIC to inform of any completions.
Furthermore, later in the reset process is a call to init_tx_pools()
which marks every entry in the tx pool as free (ie not outstanding).
So if the driver is to make a call to init_tx_pools(), it must first
be sure that the tx pool is empty of skb references.
This issue was discovered by observing the following in the logs during
EEH testing:
TX free map points to untracked skb (tso_pool 0 idx=4)
TX free map points to untracked skb (tso_pool 0 idx=5)
TX free map points to untracked skb (tso_pool 1 idx=36)
Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pairs
This not only includes rewording, but also where to put which emphasis
on terms in this document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Because Linux can be a target as well, add terminology to differentiate
between Linux being the target and Linux accessing targets.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
We now have the updated I2C specs and our own Code of Conduct, so we
have all we need to switch over to the inclusive terminology. Define
them here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Fastest I2C mode is 5 MHz. Update the docs and reword the paragraph
slightly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Luckily, the specs are directly downloadable again, so update the link.
Also update its title to the original name "I²C".
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Change the first paragraphs to contain only one space after the end of
the previous sentence like in the rest of the document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The TI eQEP clock is both a functional and interface clock. Since it is
required for the device to function, we should be enabling it at probe.
Up to now, we've just been lucky that the clock was enabled by something
else on the system already.
Fixes: f213729f6796 ("counter: new TI eQEP driver")
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240621-ti-eqep-enable-clock-v2-1-edd3421b54d4@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Don't accept TT entries for out-of-spec VIDs, by Sven Eckelmann
- Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only
callbacks", by Linus Lüssing
* tag 'batadv-net-pullrequest-20240621' of git://git.open-mesh.org/linux-merge:
Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks"
batman-adv: Don't accept TT entries for out-of-spec VIDs
====================
Link: https://patch.msgid.link/20240621143915.49137-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-06-21
The first patch is by Oleksij Rempel, it enhances the error handling
for tightly received RTS message in the j1939 protocol.
Shigeru Yoshida's patch fixes a kernel information leak in
j1939_send_one() in the j1939 protocol.
Followed by a patch by Oleksij Rempel for the j1939 protocol, to
properly recover from a CAN bus error during BAM transmission.
A patch by Chen Ni properly propagates errors in the kvaser_usb
driver.
The last patch is by Vitor Soares, that fixes an infinite loop in the
mcp251xfd driver is SPI async sending fails during xmit.
* tag 'linux-can-fixes-for-6.10-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: fix infinite loop when xmit fails
can: kvaser_usb: fix return value for hif_usb_send_regout
net: can: j1939: recover socket queue on CAN bus error during BAM transmission
net: can: j1939: Initialize unused data in j1939_send_one()
net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
====================
Link: https://patch.msgid.link/20240621121739.434355-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure the inner IP header is part of the skb's linear data before
setting old_iph. Otherwise, on a non-linear skb, old_iph could point
outside of the packet data.
Unlike classical VXLAN, which always encapsulates Ethernet packets,
VXLAN-GPE can transport IP packets directly. In that case, we need to
look at skb->protocol to figure out if an Ethernet header is present.
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/2aa75f6fa62ac9dbe4f16ad5ba75dd04a51d4b99.1718804000.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes: one in the ufs driver fixing an obvious memory leak and the
other (with a core flag based update) trying to prevent USB crashes by
stopping the core from issuing a request for the I/O Hints mode page"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for USB/UAS devices
scsi: core: Introduce the BLIST_SKIP_IO_HINTS flag
scsi: ufs: core: Free memory allocated for model before reinit
|
|
I still see "RPC: Could not send backchannel reply error: -110"
quite often, along with slow-running tests. Debugging shows that the
backchannel is still stumbling when it has to queue a callback reply
on a busy transport.
Note that every one of these timeouts causes a connection loss by
virtue of the xprt_conditional_disconnect() call in that arm of
call_cb_transmit_status().
I found that setting to_maxval is necessary to get the RPC timeout
logic to behave whenever to_exponential is not set.
Fixes: 57331a59ac0d ("NFSv4.1: Use the nfs_client's rpc timeouts for backchannel")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull drm fixes from Dave Airlie:
"Still pretty quiet, two weeks worth of amdgpu fixes, with one i915 and
one xe. I didn't get the drm-misc-fixes tree PR this week, but there
was only one fix queued and I think it can wait another week, so seems
pretty normal.
xe:
- Fix for invalid register access
i915:
- Fix conditions for joiner usage, it's not possible with eDP MSO
amdgpu:
- Fix display idle optimization race
- Fix GPUVM TLB flush locking scope
- IPS fix
- GFX 9.4.3 harvesting fix
- Runtime pm fix for shared buffers
- DCN 3.5.x fixes
- USB4 fix
- RISC-V clang fix
- Silence UBSAN warnings
- MES11 fix
- PSP 14.0.x fix"
* tag 'drm-fixes-2024-06-22' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/vf: Don't touch GuC irq registers if using memory irqs
drm/amdgpu: init TA fw for psp v14
drm/amdgpu: cleanup MES11 command submission
drm/amdgpu: fix UBSAN warning in kv_dpm.c
drm/radeon: fix UBSAN warning in kv_dpm.c
drm/amd/display: Disable CONFIG_DRM_AMD_DC_FP for RISC-V with clang
drm/amd/display: Attempt to avoid empty TUs when endpoint is DPIA
drm/amd/display: change dram_clock_latency to 34us for dcn35
drm/amd/display: Change dram_clock_latency to 34us for dcn351
drm/amdgpu: revert "take runtime pm reference when we attach a buffer" v2
drm/amdgpu: Indicate CU havest info to CP
drm/amd/display: prevent register access while in IPS
drm/amdgpu: fix locking scope when flushing tlb
drm/amd/display: Remove redundant idle optimization check
drm/i915/mso: using joiner is not possible with eDP MSO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs, one originating in this cycle and one from 6.6"
* tag 'ovl-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: fix encoding fid for lower only root
ovl: fix copy-up in tmpfile
|
|
Pull io_uring fix from Jens Axboe:
"Just a single cleanup for the fixed buffer iov_iter import.
More cosmetic than anything else, but let's get it cleaned up as it's
confusing"
* tag 'io_uring-6.10-20240621' of git://git.kernel.dk/linux:
io_uring/rsrc: fix incorrect assignment of iter->nr_segs in io_import_fixed
|
|
Pull rdma fixes from Jason Gunthorpe:
"Small bug fixes:
- Prevent a crash in bnxt if the en and rdma drivers disagree on the
MSI vectors
- Have rxe memcpy inline data from the correct address
- Fix rxe's validation of UD packets
- Several mlx5 mr cache issues: bad lock balancing on error, missing
propagation of the ATS property to the HW, wrong bucketing of freed
mrs in some cases
- Incorrect goto error unwind in mlx5 driver probe
- Missed userspace input validation in mlx5 SRQ create
- Incorrect uABI in MANA rejecting valid optional MR creation flags"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mana_ib: Ignore optional access flags for MRs
RDMA/mlx5: Add check for srq max_sge attribute
RDMA/mlx5: Fix unwind flow as part of mlx5_ib_stage_init_init
RDMA/mlx5: Ensure created mkeys always have a populated rb_key
RDMA/mlx5: Follow rb_key.ats when creating new mkeys
RDMA/mlx5: Remove extra unlock on error path
RDMA/rxe: Fix responder length checking for UD request packets
RDMA/rxe: Fix data copy for IB_SEND_INLINE
RDMA/bnxt_re: Fix the max msix vectors macro
|
