| Age | Commit message (Collapse) | Author |
|---|
|
At btrfs_commit_super(), called in a few contexts such as when unmounting
a filesystem, we use btrfs_join_transaction() to catch any running
transaction and then commit it. This will however create a new and empty
transaction in case there's no running transaction or there's a running
transaction with a state >= TRANS_STATE_UNBLOCKED.
As we just want to be sure that any existing transaction is fully
committed, we can use btrfs_attach_transaction_barrier() instead of
btrfs_join_transaction(), therefore avoiding the creation and commit of
empty transactions, which only waste IO and causes rotation of the
precious backup roots.
Example where we create and commit a pointless empty transaction:
$ mkfs.btrfs -f /dev/sdj
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 6
$ mount /dev/sdj /mnt/sdj
$ touch /mnt/sdj/foo
# Commit the currently open transaction. Just 'sync' or wait ~30
# seconds for the transaction kthread to commit it.
$ sync
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 7
$ umount /mnt/sdj
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 8
The transaction with id 8 was pointless, an empty transaction that did
not achieve anything.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When flushing reservations we are using btrfs_join_transaction() to get a
handle for the current transaction and then commit it to try to release
space. However btrfs_join_transaction() has some undesirable consequences:
1) If there's no running transaction, it will create one, and we will
commit it right after. This is unnecessary because it will not release
any space, and it will result in unnecessary IO and rotation of backup
roots in the superblock;
2) If there's a current transaction and that transaction is committing
(its state is >= TRANS_STATE_COMMIT_DOING), it will wait for that
transaction to almost finish its commit (for its state to be >=
TRANS_STATE_UNBLOCKED) and then start and return a new transaction.
We will then commit that new transaction, which is pointless because
all we wanted was to wait for the current (previous) transaction to
fully finish its commit (state == TRANS_STATE_COMPLETED), and by
starting and committing a new transaction we are wasting IO too and
causing unnecessary rotation of backup roots in the superblock.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The range is specified only in two ways, we can simplify the case for
the whole filesystem range as a NULL block group parameter.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently if we fully clean a subvolume (not only delete its directory,
but fully clean all it's related data and root item), the associated
qgroup would not be removed.
We have "btrfs qgroup clear-stale" to handle such 0 level qgroups.
Change the behavior to automatically removie the qgroup of a fully
cleaned subvolume when possible:
- Full qgroup but still consistent
We can and should remove the qgroup.
The qgroup numbers should be 0, without any rsv.
- Full qgroup but inconsistent
Can happen with drop_subtree_threshold feature (skip accounting
and mark qgroup inconsistent).
We can and should remove the qgroup.
Higher level qgroup numbers will be incorrect, but since qgroup
is already inconsistent, it should not be a problem.
- Squota mode
This is the special case, we can only drop the qgroup if its numbers
are all 0.
This would be handled by can_delete_qgroup(), so we only need to check
the return value and ignore the -EBUSY error.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1222847
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Currently if one is utilizing "qgroups/drop_subtree_threshold" sysfs,
and a snapshot with level higher than that value is dropped, we will
not be able to delete the qgroup until next qgroup rescan:
uuid=ffffffff-eeee-dddd-cccc-000000000000
wipefs -fa $dev
mkfs.btrfs -f $dev -O quota -s 4k -n 4k -U $uuid
mount $dev $mnt
btrfs subvolume create $mnt/subv1/
for (( i = 0; i < 1024; i++ )); do
xfs_io -f -c "pwrite 0 2k" $mnt/subv1/file_$i > /dev/null
done
sync
btrfs subvolume snapshot $mnt/subv1 $mnt/snapshot
btrfs quota enable $mnt
btrfs quota rescan -w $mnt
sync
echo 1 > /sys/fs/btrfs/$uuid/qgroups/drop_subtree_threshold
btrfs subvolume delete $mnt/snapshot
btrfs subvolume sync $mnt
btrfs qgroup show -prce --sync $mnt
btrfs qgroup destroy 0/257 $mnt
umount $mnt
The final qgroup removal would fail with the following error:
ERROR: unable to destroy quota group: Device or resource busy
[CAUSE]
The above script would generate a subvolume of level 2, then snapshot
it, enable qgroup, set the drop_subtree_threshold, then drop the
snapshot.
Since the subvolume drop would meet the threshold, qgroup would be
marked inconsistent and skip accounting to avoid hanging the system at
transaction commit.
But currently we do not allow a qgroup with any rfer/excl numbers to be
dropped, and this is not really compatible with the new
drop_subtree_threshold behavior.
[FIX]
Only require the strict zero rfer/excl/rfer_cmpr/excl_cmpr for squota
mode. This is due to the fact that squota can never go inconsistent,
and it can have dropped subvolume but with non-zero qgroup numbers for
future accounting.
For full qgroup mode, we only check if there is a subvolume for it.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Reported by 'gcc -Wcast-qual', the argument from which write_extent_buffer()
reads data to write to the eb should be const. In addition the const
needs to be also added to __write_extent_buffer() local buffers.
All callers of write_eb_member() can now be updated to use const for the
input buffer structure or type.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was reported by 'gcc -Wcast-qual', the get_unaligned_le8() simply
returns the argument and there's no reason to drop the cast.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was added in c61a16a701a126 ("Btrfs: fix the confusion between
delalloc bytes and metadata bytes") and removed in 03fe78cc2942c5
("btrfs: use delalloc_bytes to determine flush amount for
shrink_delalloc") where the calculation was reworked to use a
non-constant numbers. This was found by 'make W=2'.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We've started to use for-loop local variables and in a few places this
shadows a function variable. Convert a few cases reported by 'make W=2'.
If applicable also change the style to post-increment, that's the
preferred one.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix variable names in two macros where there's a local function variable
of the same name. In subpage_calc_start_bit() it's in several callers,
in btrfs_abort_transaction() it's only in replace_file_extents().
Found by 'make W=2'.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When running 'make W=2' there are a few reports where a variable of the
same name is declared in a nested block. In all the cases we can use the
one declared in the parent block, no problematic cases were found.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of using a VFS inode local pointer and then doing many BTRFS_I()
calls inside btrfs_sync_file(), use a btrfs_inode pointer instead. This
makes everything a bit easier to read and less confusing, allowing to
make some statements shorter.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing a (VFS) inode pointer argument, pass a btrfs_inode
instead, as this is generally what we do for internal APIs, making it
more consistent with most of the code base. This will later allow to
help to remove a lot of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing a (VFS) inode pointer argument, pass a btrfs_inode
instead, as this is generally what we do for internal APIs, making it
more consistent with most of the code base. This will later allow to
help to remove a lot of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of using a inode pointer, use a btrfs_inode pointer in the log
context structure, as this is generally what we need and allows for some
internal APIs to take a btrfs_inode instead, making them more consistent
with most of the code base. This will later allow to help to remove a lot
of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_finish_ordered_extent() returns a boolean indicating if
the ordered extent was added to the work queue for completion, but none
of its callers cares about it, so make it return void.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_block_group_root() is declared in disk-io.c; however,
all its callers are in block-group.c. Move it to the latter file and
declare it static.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Drop the single-use variable bytenr_orig and instead use btrfs_sb_offset()
in the function argument passing.
Fix a stale comment about not automatically fixing a bad primary
superblock from the backup mirror copies. Also, move the comment closer
to where the primary superblock read occurs.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We are currently using a cached rb_root (struct rb_root_cached) for the
rb root of struct extent_map_tree. This doesn't offer much of an advantage
here because:
1) It's only advantage over the regular rb_root is that it caches a
pointer to the left most node (first node), so a call to
rb_first_cached() doesn't have to chase pointers until it reaches
the left most node;
2) We only have two scenarios that access left most node with
rb_first_cached():
When dropping all extent maps from an inode, during inode eviction;
When iterating over extent maps during the extent map shrinker;
3) In both cases we keep removing extent maps, which causes deletion of
the left most node so rb_erase_cached() has to call rb_next() to find
out what's the next left most node and assign it to
struct rb_root_cached::rb_leftmost;
4) We can do that ourselves in those two uses cases and stop using a
rb_root_cached rb tree and use instead a regular rb_root rb tree.
This reduces the size of struct extent_map_tree by 8 bytes and, since
this structure is embedded in struct btrfs_inode, it also reduces the
size of that structure by 8 bytes.
So on a 64 bits platform the size of btrfs_inode is reduced from 1032
bytes down to 1024 bytes.
This means we will be able to have 4 inodes per 4K page instead of 3.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we name the rb_root member of struct extent_map_tree as 'map',
which is odd and confusing. Since it's a root node, rename it to 'root'.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On 64 bits platforms we don't really need to have a dedicated member (the
objectid field) for the inode's number since we store in the VFS inode's
i_ino member, which is an unsigned long and this type is 64 bits wide on
64 bits platforms. We only need that field in case we are on a 32 bits
platform because the unsigned long type is 32 bits wide on such platforms
See commit 33345d01522f ("Btrfs: Always use 64bit inode number") regarding
this 64/32 bits detail.
The objectid field of struct btrfs_inode is also used to store the ID of
a root for directories that are stubs for unreferenced roots. In such
cases the inode is a directory and has the BTRFS_INODE_ROOT_STUB runtime
flag set.
So in order to reduce the size of btrfs_inode structure on 64 bits
platforms we can remove the objectid member and use the VFS inode's i_ino
member instead whenever we need to get the inode number. In case the inode
is a root stub (BTRFS_INODE_ROOT_STUB set) we can use the member
last_reflink_trans to store the ID of the unreferenced root, since such
inode is a directory and reflinks can't be done against directories.
So remove the objectid fields for 64 bits platforms and alias the
last_reflink_trans field with a name of ref_root_id in a union.
On a release kernel config, this reduces the size of struct btrfs_inode
from 1040 bytes down to 1032 bytes.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently struct btrfs_inode has a key member, named "location", that is
either:
1) The key of the inode's item. In this case the objectid is the number
of the inode;
2) A key stored in a dir entry with a type of BTRFS_ROOT_ITEM_KEY, for
the case where we have a root that is a snapshot of a subvolume that
points to other subvolumes. In this case the objectid is the ID of
a subvolume inside the snapshotted parent subvolume.
The key is only used to lookup the inode item for the first case, while
for the second it's never used since it corresponds to directory stubs
created with new_simple_dir() and which are marked as dummy, so there's
no actual inode item to ever update. In the second case we only check
the key type at btrfs_ino() for 32 bits platforms and its objectid is
only needed for unlink.
Instead of using a key we can do fine with just the objectid, since we
can generate the key whenever we need it having only the objectid, as
in all use cases the type is always BTRFS_INODE_ITEM_KEY and the offset
is always 0.
So use only an objectid instead of a full key. This reduces the size of
struct btrfs_inode from 1048 bytes down to 1040 bytes on a release kernel.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When not using the NO_HOLES feature we always allocate an io tree for an
inode's file_extent_tree. This is wasteful because that io tree is only
used for regular files, so we allocate more memory than needed for inodes
that represent directories or symlinks for example, or for inodes that
correspond to free space inodes.
So improve on this by allocating the io tree only for inodes of regular
files that are not free space inodes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The index_cnt field of struct btrfs_inode is used only for two purposes:
1) To store the index for the next entry added to a directory;
2) For the data relocation inode to track the logical start address of the
block group currently being relocated.
For the relocation case we use index_cnt because it's not used for
anything else in the relocation use case - we could have used other fields
that are not used by relocation such as defrag_bytes, last_unlink_trans
or last_reflink_trans for example (among others).
Since the csum_bytes field is not used for directories, do the following
changes:
1) Put index_cnt and csum_bytes in a union, and index_cnt is only
initialized when the inode is a directory. The csum_bytes is only
accessed in IO paths for regular files, so we're fine here;
2) Use the defrag_bytes field for relocation, since the data relocation
inode is never used for defrag purposes. And to make the naming better,
alias it to reloc_block_group_start by using a union.
This reduces the size of struct btrfs_inode by 8 bytes in a release
kernel, from 1056 bytes down to 1048 bytes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we use the spinlock inode_lock from struct btrfs_root to
serialize access to two different data structures:
1) The delayed inodes xarray (struct btrfs_root::delayed_nodes);
2) The inodes xarray (struct btrfs_root::inodes).
Instead of using our own lock, we can use the spinlock that is part of the
xarray implementation, by using the xa_lock() and xa_unlock() APIs and
using the xarray APIs with the double underscore prefix that don't take
the xarray locks and assume the caller is using xa_lock() and xa_unlock().
So remove the spinlock inode_lock from struct btrfs_root and use the
corresponding xarray locks. This brings 2 benefits:
1) We reduce the size of struct btrfs_root, from 1336 bytes down to
1328 bytes on a 64 bits release kernel config;
2) We reduce lock contention by not using anymore the same lock for
changing two different and unrelated xarrays.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Make btrfs_iget_path() simpler and easier to read by avoiding nesting of
if-then-else statements and having an error label to do all the error
handling instead of repeating it a couple times.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When creating a new inode, at btrfs_create_new_inode(), one of the very
last steps is to add the inode to the root's inodes xarray. This often
requires allocating memory which may fail (even though xarrays have a
dedicated kmem_cache which make it less likely to fail), and at that point
we are forced to abort the current transaction (as some, but not all, of
the inode metadata was added to its subvolume btree).
To avoid a transaction abort, preallocate memory for the xarray early at
btrfs_create_new_inode(), so that if we fail we don't need to abort the
transaction and the insertion into the xarray is guaranteed to succeed.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we use a red black tree (rb-tree) to track the currently open
inodes of a root (in struct btrfs_root::inode_tree). This however is not
very efficient when the number of inodes is large since rb-trees are
binary trees. For example for 100K open inodes, the tree has a depth of
17. Besides that, inserting into the tree requires navigating through it
and pulling useless cache lines in the process since the red black tree
nodes are embedded within the btrfs inode - on the other hand, by being
embedded, it requires no extra memory allocations.
We can improve this by using an xarray instead, which is efficient when
indices are densely clustered (such as inode numbers), is more cache
friendly and behaves like a resizable array, with a much better search
and insertion complexity than a red black tree. This only has one small
disadvantage which is that insertion will sometimes require allocating
memory for the xarray - which may fail (not that often since it uses a
kmem_cache) - but on the other hand we can reduce the btrfs inode
structure size by 24 bytes (from 1080 down to 1056 bytes) after removing
the embedded red black tree node, which after the next patches will allow
to reduce the size of the structure to 1024 bytes, meaning we will be able
to store 4 inodes per 4K page instead of 3 inodes.
This change does a straightforward change to use an xarray, and results
in a transaction abort if we can't allocate memory for the xarray when
creating an inode - but the next patch changes things so that we don't
need to abort.
Running the following fs_mark test showed some improvements:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
MOUNT_OPTIONS="-o ssd"
FILES=100000
THREADS=$(nproc --all)
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $DEV
mount $MOUNT_OPTIONS $DEV $MNT
OPTS="-S 0 -L 5 -n $FILES -s 0 -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done
fs_mark $OPTS
umount $MNT
Before this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 92081.6 12505547
16 2400000 0 138222.6 13067072
23 3600000 0 148833.1 13290336
43 4800000 0 97864.7 13931248
53 6000000 0 85597.3 14384313
After this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 93225.1 12571078
16 2400000 0 146720.3 12805007
23 3600000 0 160626.4 13073835
46 4800000 0 116286.2 13802927
53 6000000 0 90087.9 14754892
The test was run with a release kernel config (Debian's default config).
Also capturing the insertion times into the rb tree and into the xarray,
that is measuring the duration of the old function inode_tree_add() and
the duration of the new btrfs_add_inode_to_root() function, gave the
following results (in nanoseconds):
Before this patch, inode_tree_add() execution times:
Count: 5000000
Range: 0.000 - 5536887.000; Mean: 775.674; Median: 729.000; Stddev: 4820.961
Percentiles: 90th: 1015.000; 95th: 1139.000; 99th: 1397.000
0.000 - 7.816: 40 |
7.816 - 37.858: 209 |
37.858 - 170.278: 6059 |
170.278 - 753.961: 2754890 #####################################################
753.961 - 3326.728: 2232312 ###########################################
3326.728 - 14667.018: 4366 |
14667.018 - 64652.943: 852 |
64652.943 - 284981.761: 550 |
284981.761 - 1256150.914: 221 |
1256150.914 - 5536887.000: 7 |
After this patch, btrfs_add_inode_to_root() execution times:
Count: 5000000
Range: 0.000 - 2900652.000; Mean: 272.148; Median: 241.000; Stddev: 2873.369
Percentiles: 90th: 342.000; 95th: 432.000; 99th: 572.000
0.000 - 7.264: 104 |
7.264 - 33.145: 352 |
33.145 - 140.081: 109606 #
140.081 - 581.930: 4840090 #####################################################
581.930 - 2407.590: 43532 |
2407.590 - 9950.979: 2245 |
9950.979 - 41119.278: 514 |
41119.278 - 169902.616: 155 |
169902.616 - 702018.539: 47 |
702018.539 - 2900652.000: 9 |
Average, percentiles, standard deviation, etc, are all much better.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are several hard-to-hit ASSERT()s hit inside raid56.
Unfortunately the ASSERT() expression is a little complex, and except
the ASSERT(), there is nothing to provide any clue.
Considering if race is involved, it's pretty hard to reproduce.
Meanwhile sometimes the dump of the rbio structure can provide some
pretty good clues, it's worth to do the extra multi-line dump for
btrfs raid56 related code.
The dump looks like this:
BTRFS critical (device dm-3): bioc logical=4598530048 full_stripe=4598530048 size=0 map_type=0x81 mirror=0 replace_nr_stripes=0 replace_stripe_src=-1 num_stripes=5
BTRFS critical (device dm-3): nr=0 devid=1 physical=1166147584
BTRFS critical (device dm-3): nr=1 devid=2 physical=1145176064
BTRFS critical (device dm-3): nr=2 devid=4 physical=1145176064
BTRFS critical (device dm-3): nr=3 devid=5 physical=1145176064
BTRFS critical (device dm-3): nr=4 devid=3 physical=1145176064
BTRFS critical (device dm-3): rbio flags=0x0 nr_sectors=80 nr_data=4 real_stripes=5 stripe_nsectors=16 scrubp=0 dbitmap=0x0
BTRFS critical (device dm-3): logical=4598530048
assertion failed: orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN, in fs/btrfs/raid56.c:1702
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Due to a refactoring introduced by commit 53d9981ca20e ("btrfs: split
btrfs_alloc_ordered_extent to allocation and insertion helpers"), the
function btrfs_alloc_ordered_extent() was renamed to
alloc_ordered_extent(), so the comment at btrfs_remove_ordered_extent()
is no longer very accurate. Update the comment to refer to the new
name "alloc_ordered_extent()".
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix typo in the end IO compression callbacks, from "comprssed" to
"compressed".
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_migrate_to_delayed_refs_rsv() is no longer used.
Its last use was removed in commit 2f6397e448e6 ("btrfs: don't refill
whole delayed refs block reserve when starting transaction").
So remove the function.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's not used outside zoned.c, so make it static.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Passing in a 'struct btrfs_io_geometry into handle_ops_on_dev_replace
can reduce the number of arguments by two.
No functional changes otherwise.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The ioctls that add relations, create qgroups or set limits start/join
transaction. When quotas are not enabled this is not necessary, there
will be errors reported back anyway but this could be also misleading
and we should really report that quotas are not enabled. For that use
-ENOTCONN.
The helper is meant to do a quick check before any other standard ioctl
checks are done. If quota is disabled meanwhile we still rely on proper
locking inside any active operation changing the qgroup structures.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:
- Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
set the alpha enable bit and not set bits that don't exist
- Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
warnings
- Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
correct
- Fix the min/max rate clamping logic in the Allwinner driver that
got broken in v6.9
- Limit runtime PM enabling in the Mediatek driver to only
mt8183-mfgcfg so that system wide resume doesn't break on other
Mediatek SoCs"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix unnecessary copy to 0 when kernel is booted at address 0
- Fix usercopy crash when dumping dtl via debugfs
- Avoid possible crash when PCI hotplug races with error handling
- Fix kexec crash caused by scv being disabled before other CPUs
call-in
- Fix powerpc selftests build with USERCFLAGS set
Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.
* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build with USERCFLAGS set
powerpc/pseries: Fix scv instruction crash with kexec
powerpc/eeh: avoid possible crash when edev->pdev changes
powerpc/pseries: Whitelist dtl slub object for copying to userspace
powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0
|
|
Pull smb client fix from Steve French:
"Fix for smb3 readahead performance regression"
* tag '6.10-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix read-performance regression by dropping readahead expansion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"An i2c driver fix"
* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
|
|
Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -Wno-error cache_shape.c ...
cache_shape.c:18:10: fatal error: utils.h: No such file or directory
18 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.
Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.
Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.
With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"'
-I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error
cache_shape.c ...
Fixes: 5553a79387e9 ("selftests/powerpc: Add flags.mk to support pmu buildable")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240706120833.909853-1-mpe@ellerman.id.au
|
|
ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"A single bug fix to properly remove all of the securityfs IMA
measurement lists"
* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: fix wrong zero-assignment during securityfs dentry remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci update from Bjorn Helgaas:
- Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
Synopsys DesignWare eDMA driver and reflect that he is no longer at
Synopsys and isn't in a position to maintain the DesignWare xData
traffic generator (Bjorn Helgaas)
* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the CMODX example in the recently added icache flushing
prctl()
- A fix to the perf driver to avoid corrupting event data on counter
overflows when external overflow handlers are in use
- A fix to clear all hardware performance monitor events on boot, to
avoid dangling events firmware or previously booted kernels from
triggering spuriously
- A fix to the perf event probing logic to avoid erroneously reporting
the presence of unimplemented counters. This also prevents some
implemented counters from being reported
- A build fix for the vector sigreturn selftest on clang
- A fix to ftrace, which now requires the previously optional index
argument to ftrace_graph_ret_addr()
- A fix to avoid deadlocking if kexec crash handling triggers in an
interrupt context
* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Avoid deadlock in kexec crash path
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
riscv: selftests: Fix vsetivli args for clang
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
documentation: Fix riscv cmodx example
|
|
Pull drm fixes from Daniel Vetter:
"Just small fixes all over here, all quiet as it should.
drivers:
- amd: mostly amdgpu display fixes + radeon vm NULL deref fix
- xe: migration error handling + typoed register name in gt setup
- i915: usb-c fix to shut up warnings on MTL+
- panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
wrongly
- panel quirks
- nouveau: NULL deref in get_modes
drm core:
- fbdev big endian fix for the dma memory backed variant
drivers/firmware:
- fix sysfb refcounting"
* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/mcr: Avoid clobbering DSS steering
drm/xe: fix error handling in xe_migrate_update_pgtables
drm/ttm: Always take the bo delayed cleanup path for imported bos
drm/fbdev-generic: Fix framebuffer on big endian devices
drm/panthor: Fix sync-only jobs
drm/panthor: Don't check the array stride on empty uobj arrays
drm/amdgpu/atomfirmware: silence UBSAN warning
drm/radeon: check bo_va->bo is non-NULL before using it
drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
drm/amd/display: Update efficiency bandwidth for dcn351
drm/amd/display: Fix refresh rate range for some panel
drm/amd/display: Account for cursor prefetch BW in DML1 mode support
drm/amd/display: Add refresh rate range check
drm/amd/display: Reset freesync config before update new state
drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
drm: panel-orientation-quirks: Add quirk for Valve Galileo
drm/i915/display: For MTL+ platforms skip mg dp programming
drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
firmware: sysfb: Fix reference count of sysfb parent device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
driver:
- add two OF lookup quirks for TSC2005 and MIPS Lantiq
- don't try to figure out bgpio_bits from the 'ngpios' property in
gpio-mmio"
* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: add polarity quirk for TSC2005
gpio: mmio: do not calculate bgpio_bits via "ngpios"
gpiolib: of: fix lookup quirk for MIPS Lantiq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM fixes from Jarkko Sakkinen:
"This contains the fixes for !chip->auth condition, preventing the
breakage of:
- tpm_ftpm_tee.c
- tpm_i2c_nuvoton.c
- tpm_ibmvtpm.c
- tpm_tis_i2c_cr50.c
- tpm_vtpm_proxy.c
All drivers will continue to work as they did in 6.9, except a single
warning (dev_warn() not WARN()) is printed to klog only to inform that
authenticated sessions are not enabled"
* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
tpm: Address !chip->auth in tpm_buf_append_name()
tpm: Address !chip->auth in tpm2_*_auth_session()
|
|
Pull kvm fix from Paolo Bonzini:
- s390: fix support for z16 systems
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: fix LPSWEY handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This tag includes a nice fix in the PNX driver that has been
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-07-03:
amdgpu:
- Freesync fixes
- DML1 bandwidth fix
- DCN 3.5 fixes
- DML2 fix
- Silence an UBSAN warning
radeon:
- GPUVM fix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703184723.1981997-1-alexander.deucher@amd.com
|
