summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-22lockdep: fix fs_reclaim warningTetsuo Handa
Dave Jones reported fs_reclaim lockdep warnings. ============================================ WARNING: possible recursive locking detected 4.15.0-rc9-backup-debug+ #1 Not tainted -------------------------------------------- sshd/24800 is trying to acquire lock: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 but task is already holding lock: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(fs_reclaim); lock(fs_reclaim); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by sshd/24800: #0: (sk_lock-AF_INET6){+.+.}, at: [<000000001a069652>] tcp_sendmsg+0x19/0x40 #1: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 stack backtrace: CPU: 3 PID: 24800 Comm: sshd Not tainted 4.15.0-rc9-backup-debug+ #1 Call Trace: dump_stack+0xbc/0x13f __lock_acquire+0xa09/0x2040 lock_acquire+0x12e/0x350 fs_reclaim_acquire.part.102+0x29/0x30 kmem_cache_alloc+0x3d/0x2c0 alloc_extent_state+0xa7/0x410 __clear_extent_bit+0x3ea/0x570 try_release_extent_mapping+0x21a/0x260 __btrfs_releasepage+0xb0/0x1c0 btrfs_releasepage+0x161/0x170 try_to_release_page+0x162/0x1c0 shrink_page_list+0x1d5a/0x2fb0 shrink_inactive_list+0x451/0x940 shrink_node_memcg.constprop.88+0x4c9/0x5e0 shrink_node+0x12d/0x260 try_to_free_pages+0x418/0xaf0 __alloc_pages_slowpath+0x976/0x1790 __alloc_pages_nodemask+0x52c/0x5c0 new_slab+0x374/0x3f0 ___slab_alloc.constprop.81+0x47e/0x5a0 __slab_alloc.constprop.80+0x32/0x60 __kmalloc_track_caller+0x267/0x310 __kmalloc_reserve.isra.40+0x29/0x80 __alloc_skb+0xee/0x390 sk_stream_alloc_skb+0xb8/0x340 tcp_sendmsg_locked+0x8e6/0x1d30 tcp_sendmsg+0x27/0x40 inet_sendmsg+0xd0/0x310 sock_write_iter+0x17a/0x240 __vfs_write+0x2ab/0x380 vfs_write+0xfb/0x260 SyS_write+0xb6/0x140 do_syscall_64+0x1e5/0xc05 entry_SYSCALL64_slow_path+0x25/0x25 This warning is caused by commit d92a8cfcb37e ("locking/lockdep: Rework FS_RECLAIM annotation") which replaced the use of lockdep_{set,clear}_current_reclaim_state() in __perform_reclaim() and lockdep_trace_alloc() in slab_pre_alloc_hook() with fs_reclaim_acquire()/ fs_reclaim_release(). Since __kmalloc_reserve() from __alloc_skb() adds __GFP_NOMEMALLOC | __GFP_NOWARN to gfp_mask, and all reclaim path simply propagates __GFP_NOMEMALLOC, fs_reclaim_acquire() in slab_pre_alloc_hook() is trying to grab the 'fake' lock again when __perform_reclaim() already grabbed the 'fake' lock. The /* this guy won't enter reclaim */ if ((current->flags & PF_MEMALLOC) && !(gfp_mask & __GFP_NOMEMALLOC)) return false; test which causes slab_pre_alloc_hook() to try to grab the 'fake' lock was added by commit cf40bd16fdad ("lockdep: annotate reclaim context (__GFP_NOFS)"). But that test is outdated because PF_MEMALLOC thread won't enter reclaim regardless of __GFP_NOMEMALLOC after commit 341ce06f69ab ("page allocator: calculate the alloc_flags for allocation only once") added the PF_MEMALLOC safeguard ( /* Avoid recursion of direct reclaim */ if (p->flags & PF_MEMALLOC) goto nopage; in __alloc_pages_slowpath()). Thus, let's fix outdated test by removing __GFP_NOMEMALLOC test and allow __need_fs_reclaim() to return false. Link: http://lkml.kernel.org/r/201802280650.FJC73911.FOSOMLJVFFQtHO@I-love.SAKURA.ne.jp Fixes: d92a8cfcb37ecd13 ("locking/lockdep: Rework FS_RECLAIM annotation") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Dave Jones <davej@codemonkey.org.uk> Tested-by: Dave Jones <davej@codemonkey.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <npiggin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nikolay Borisov <nborisov@suse.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-22MAINTAINERS: update Mark Fasheh's e-mailMark Fasheh
I'd like to use my personal e-mail for Ocfs2 requests and review. Link: http://lkml.kernel.org/r/20180311231356.9385-1-mfasheh@versity.com Signed-off-by: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-22mm/mempolicy.c: avoid use uninitialized preferred_nodeYisheng Xie
Alexander reported a use of uninitialized memory in __mpol_equal(), which is caused by incorrect use of preferred_node. When mempolicy in mode MPOL_PREFERRED with flags MPOL_F_LOCAL, it uses numa_node_id() instead of preferred_node, however, __mpol_equal() uses preferred_node without checking whether it is MPOL_F_LOCAL or not. [akpm@linux-foundation.org: slight comment tweak] Link: http://lkml.kernel.org/r/4ebee1c2-57f6-bcb8-0e2d-1833d1ee0bb7@huawei.com Fixes: fc36b8d3d819 ("mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy") Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23drm/ast: Fixed 1280x800 Display IssueY.C. Chen
The original ast driver cannot display properly if the resolution is 1280x800 and the pixel clock is 83.5MHz. Here is the update to fix it. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-03-22Merge tag 'acpi-4.16-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert one recent commit that added incorrect battery quirks for some Asus systems and fix an off-by-one error in the watchdog driver based on the ACPI WDAT table. Specifics: - Revert the recent change adding battery quirks for Asus GL502VSK and UX305LA as these quirks turn out to be inadequate and possibly premature (Daniel Drake). - Fix an off-by-one error in the resource allocation part of the watchdog driver based on the ACPI WDAT table (Takashi Iwai)" * tag 'acpi-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / watchdog: Fix off-by-one error at resource assignment Revert "ACPI / battery: Add quirk for Asus GL502VSK and UX305LA"
2018-03-22Merge tag 'modules-for-v4.16-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules fix from Jessica Yu: "Propagate error in modules_open() to avoid possible later NULL dereference if seq_open() had failed" * tag 'modules-for-v4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: propagate error in modules_open()
2018-03-22Merge branch 'acpi-wdat'Rafael J. Wysocki
* acpi-wdat: ACPI / watchdog: Fix off-by-one error at resource assignment
2018-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Always validate XFRM esn replay attribute, from Florian Westphal. 2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long. 3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul Triebitz. 4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel Axtens. 5) Fix some interrupt handling issues in e1000e driver, from Benjamin Poitier. 6) Use strlcpy() in several ethtool get_strings methods, from Florian Fainelli. 7) Fix rhlist dup insertion, from Paul Blakey. 8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev. 9) Fix driver unload crash when link is up in smsc911x, from Jeremy Linton. 10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric Dumazet. 11) Need to purge the write queue when TCP connections are aborted, otherwise userspace using MSG_ZEROCOPY can't close the fd. From Soheil Hassas Yeganeh. 12) Fix double free in error path of team driver, from Arkadi Sharshevsky. 13) Filter fixes for hv_netvsc driver, from Stephen Hemminger. 14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo Bianconi. 15) Properly filter out unsupported feature flags in macvlan driver, from Shannon Nelson. 16) Don't request loading the diag module for a protocol if the protocol itself is not even registered. From Xin Long. 17) If datagram connect fails in ipv6, make sure the socket state is consistent afterwards. From Paolo Abeni. 18) Use after free in qed driver, from Dan Carpenter. 19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the entry. From Sabrina Dubroca. 20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins. 21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita. 22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel. 23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti. 24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli. 25) Memory leak in gemini driver, from Igor Pylypiv. 26) IDR leaks in error paths of tcf_*_init() functions, from Davide Caratti. 27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun. 28) Missing dev_put() in error path of macsec_newlink(), from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits) macsec: missing dev_put() on error in macsec_newlink() net: dsa: Fix functional dsa-loop dependency on FIXED_PHY hv_netvsc: common detach logic hv_netvsc: change GPAD teardown order on older versions hv_netvsc: use RCU to fix concurrent rx and queue changes hv_netvsc: disable NAPI before channel close net/ipv6: Handle onlink flag with multipath routes ppp: avoid loop in xmit recursion detection code ipv6: sr: fix NULL pointer dereference when setting encap source address ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state net: aquantia: driver version bump net: aquantia: Implement pci shutdown callback net: aquantia: Allow live mac address changes net: aquantia: Add tx clean budget and valid budget handling logic net: aquantia: Change inefficient wait loop on fw data reads net: aquantia: Fix a regression with reset on old firmware net: aquantia: Fix hardware reset when SPI may rarely hangup s390/qeth: on channel error, reject further cmd requests s390/qeth: lock read device while queueing next buffer s390/qeth: when thread completes, wake up all waiters ...
2018-03-22Merge tag 'mmc-v4.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC fixes intended for v4.16-rc7: MMC host: - dw_mmc: Fix the suspend/resume issue for Exynos5433 - dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems - dw_mmc: Make PIO mode work when failing with idmac when dw_mci_reset occurs - sdhci-acpi: Re-allow IRQ 0 to fix broken probe MMC core: - Update EXT_CSD caches to correctly switch partition for ioctl calls - Fix tracepoint print of blk_addr and blksz - Disable HPI on broken Micron (Numonyx) eMMC cards" * tag 'mmc-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-acpi: Fix IRQ 0 mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs mmc: core: Fix tracepoint print of blk_addr and blksz mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards mmc: dw_mmc: exynos: fix the suspend/resume issue for exynos5433 mmc: block: fix updating ext_csd caches on ioctl call mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems
2018-03-23Merge tag 'drm-misc-fixes-2018-03-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Main change is a patch to reject getfb call for multiplanar framebuffers, then we have a couple of error path fixes on the sun4i driver. Still on that driver there is a clk fix and finally a mmap offset fix on the udl driver. * tag 'drm-misc-fixes-2018-03-22' of git://anongit.freedesktop.org/drm/drm-misc: drm: udl: Properly check framebuffer mmap offsets drm: Reject getfb for multi-plane framebuffers drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()' drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()' drm/sun4i: Fix an error handling path in 'sun4i_drv_bind()' drm/sun4i: Fix exclusivity of the TCON clocks
2018-03-23Merge tag 'drm-intel-next-fixes-2018-03-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next GVT regression fix that caused guest VM GPU hang. Fix for race conditions in declaring GPU wedged (hit in CI). * tag 'drm-intel-next-fixes-2018-03-22' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/gvt: force to set all context control bits from guest drm/i915/gvt: Update PDPs after a vGPU mm object is pinned. drm/i915/gvt: Invalidate vGPU PPGTT mm objects during a vGPU reset. drm/i915/kvmgt: Handle kzalloc failure drm/i915/gvt: fix spelling mistake: "destoried" -> "destroyed" drm/i915/gvt: Remove reduntant printing of untracked mmio drm/i915/pmu: Work around compiler warnings on some kernel configs drm/i915: Only call tasklet_kill() on the first prepare_reset drm/i915: Wrap engine->schedule in RCU locks for set-wedge protection drm/i915/icl: do not save DDI A/E sharing bit for ICL
2018-03-23Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie
into drm-next A relative large set of various improvements for vmwgfx. Some of them have been around for a while, some are relatively new, but functionality should have been tested in our standalone repo. * 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Bump version patchlevel and date drm/vmwgfx: use monotonic event timestamps drm/vmwgfx: Unpin the screen object backup buffer when not used drm/vmwgfx: Stricter count of legacy surface device resources drm/vmwgfx: Use kasprintf drm/vmwgfx: Get rid of the device-private suspended member drm/vmwgfx: Improve on hibernation drm/vmwgfx: Avoid pinning fbdev framebuffers drm/vmwgfx: Fix multiple command buffer context use drm/vmwgfx: Use the cpu blit utility for framebuffer to screen target blits drm/vmwgfx: Add a cpu blit utility that can be used for page-backed bos drm/ttm: Export the ttm_k[un]map_atomic_prot API. drm/ttm: Clean up kmap_atomic_prot selection code drm/vmwgfx: Cursor update fixes drm/vmwgfx: Send the correct nonblock option for atomic_commit drm/vmwgfx: Move the stdu vblank event to atomic function drm/vmwgfx: Move screen object page flip to atomic function drm/vmwgfx: Remove drm_crtc_arm_vblank_event from atomic flush drm/vmwgfx: Move surface copy cmd to atomic function drm/vmwgfx: Avoid iterating over display unit if crtc is available
2018-03-23Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into ↵Dave Airlie
drm-next Changes this time mostly come down to: - hook up the DRM GPU scheduler - prep work for GC7000L support, to be completed in the next cycle * 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (22 commits) drm/etnaviv: bump HW job limit to 4 drm/etnaviv: etnaviv_sched: Staticize functions when possible drm/etnaviv: add PTA handling to MMUv2 drm/etnaviv: add function to load the initial PTA state drm/etnaviv: handle security states drm/etnaviv: add security handling mode enum drm/etnaviv: add hardware database drm/etnaviv: add more minor features fields drm/etnaviv: update hardware headers from rnndb drm/etnaviv: add support for slave interface clock drm/etnaviv: split out and optimize MMU fault dumping drm/etnaviv: remove the need for a gpu-subsystem DT node dt-bindings: etnaviv: add slave interface clock drm/etnaviv: use correct format specifier for size_t drm/etnaviv: replace hangcheck with scheduler timeout drm/etnaviv: lock BOs after all other submit work is done drm/etnaviv: move dependency handling to scheduler drm/etnaviv: hook up DRM GPU scheduler drm/etnaviv: track fences by IDR instead of seqno drm/etnaviv: add missing major features field to debugfs ...
2018-03-23Merge tag 'drm-intel-fixes-2018-03-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes One fix for DP MST and one fix for GPU reset on hang check. * tag 'drm-intel-fixes-2018-03-21' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Specify which engines to reset following semaphore/event lockups drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
2018-03-23Merge branch 'vmwgfx-fixes-4.16' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Two vmwgfx fixes for 4.16. Both cc'd stable. * 'vmwgfx-fixes-4.16' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix a destoy-while-held mutex problem. drm/vmwgfx: Fix black screen and device errors when running without fbdev
2018-03-23Merge tag 'imx-drm-fixes-2018-03-22' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-fixes drm/imx: fixes for early vblank event issue, array underflow error - fix an array underflow error by reordering the range check before the array subscript in ipu-prg. - make some local functions static in ipuv3-plane. - add a missng header for ipu_planes_assign_pre in ipuv3-plane. - move arming of the vblank event from atomic_begin to atomic_flush, to avoid signalling atomic commit completion to userspace before plane atomic_update has finished, due to a race condition that is likely to be hit on i.MX6QP on PRE enabled channels. * tag 'imx-drm-fixes-2018-03-22' of git://git.pengutronix.de/git/pza/linux: drm/imx: move arming of the vblank event to atomic_flush drm/imx: ipuv3-plane: Include "imx-drm.h" header file drm/imx: ipuv3-plane: Make functions static when possible gpu: ipu-v3: prg: avoid possible array underflow
2018-03-22drm/amdgpu: fix spelling mistake: "asssert" -> "assert"Colin Ian King
Trivial fix to spelling mistake in pr_err error message text Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/amd/pp: Add new asic support in pp_psm.cRex Zhu
In new asics(vega12), no power state management in driver, So no need to implement related callback functions. and add some ps checks in pp_psm.c Revert "drm/amd/powerplay: add new pp_psm infrastructure for vega12 (v2)" This reverts commit 7d1a63f3aa331b853e41f92d0e7890ed31de8c13. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/amd/pp: Clean up powerplay code on Vega12Rex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/amd/pp: Add smu irq handlers for legacy asicsRex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/amd/pp: Fix set wrong temperature range on smu7Rex Zhu
Fix the issue thermal irq was always triggered as GPU under temperature range detected The low temp in default thermal policy was set to -273. so need to use int type for the low temp. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22drm/amdgpu: Don't change preferred domian when fallback GTT v5Chunming Zhou
v2: add sanity checking v3: make code open v4: also handle visible to invisible fallback v5: Since two fallback cases, re-use goto retry Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-22macsec: missing dev_put() on error in macsec_newlink()Dan Carpenter
We moved the dev_hold(real_dev); call earlier in the function but forgot to update the error paths. Fixes: 0759e552bce7 ("macsec: fix negative refcnt on parent link") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge tag 'mac80211-for-davem-2018-03-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Two more fixes (in three patches): * ath9k_htc doesn't like QoS NDP frames, use regular ones * hwsim: set up wmediumd for radios created later ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: dsa: Fix functional dsa-loop dependency on FIXED_PHYFlorian Fainelli
We have a functional dependency on the FIXED_PHY MDIO bus because we register fixed PHY devices "the old way" which only works if the code that does this has had a chance to run before the fixed MDIO bus is probed. Make sure we account for that and have dsa_loop_bdinfo.o be either built-in or modular depending on whether CONFIG_FIXED_PHY reflects that too. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge branch 'hv_netvsc-fix-races-during-shutdown-and-changes'David S. Miller
Stephen Hemminger says: ==================== hv_netvsc: fix races during shutdown and changes This set of patches fixes issues identified by Vitaly Kuznetsov and Mohammed Gamal related to state changes in Hyper-v network driver. A lot of the issues are because setting up the netvsc device requires a second step (in work queue) to get all the sub-channels running. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22hv_netvsc: common detach logicStephen Hemminger
Make common function for detaching internals of device during changes to MTU and RSS. Make sure no more packets are transmitted and all packets have been received before doing device teardown. Change the wait logic to be common and use usleep_range(). Changes transmit enabling logic so that transmit queues are disabled during the period when lower device is being changed. And enabled only after sub channels are setup. This avoids issue where it could be that a packet was being sent while subchannel was not initialized. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22hv_netvsc: change GPAD teardown order on older versionsStephen Hemminger
On older versions of Windows, the host ignores messages after vmbus channel is closed. Workaround this by doing what Windows does and send the teardown before close on older versions of NVSP protocol. Reported-by: Mohammed Gamal <mgamal@redhat.com> Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22hv_netvsc: use RCU to fix concurrent rx and queue changesStephen Hemminger
The receive processing may continue to happen while the internal network device state is in RCU grace period. The internal RNDIS structure is associated with the internal netvsc_device structure; both have the same RCU lifetime. Defer freeing all associated parts until after grace period. Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22hv_netvsc: disable NAPI before channel closeStephen Hemminger
This makes sure that no CPU is still process packets when the channel is closed. Fixes: 76bb5db5c749 ("netvsc: fix use after free on module removal") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net/ipv6: Handle onlink flag with multipath routesDavid Ahern
For multipath routes the ONLINK flag can be specified per nexthop in rtnh_flags or globally in rtm_flags. Update ip6_route_multipath_add to consider the ONLINK setting coming from rtnh_flags. Each loop over nexthops the config for the sibling route is initialized to the global config and then per nexthop settings overlayed. The flag is 'or'ed into fib6_config to handle the ONLINK flag coming from either rtm_flags or rtnh_flags. Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22ppp: avoid loop in xmit recursion detection codeGuillaume Nault
We already detect situations where a PPP channel sends packets back to its upper PPP device. While this is enough to avoid deadlocking on xmit locks, this doesn't prevent packets from looping between the channel and the unit. The problem is that ppp_start_xmit() enqueues packets in ppp->file.xq before checking for xmit recursion. Therefore, __ppp_xmit_process() might dequeue a packet from ppp->file.xq and send it on the channel which, in turn, loops it back on the unit. Then ppp_start_xmit() queues the packet back to ppp->file.xq and __ppp_xmit_process() picks it up and sends it again through the channel. Therefore, the packet will loop between __ppp_xmit_process() and ppp_start_xmit() until some other part of the xmit path drops it. For L2TP, we rapidly fill the skb's headroom and pppol2tp_xmit() drops the packet after a few iterations. But PPTP reallocates the headroom if necessary, letting the loop run and exhaust the machine resources (as reported in https://bugzilla.kernel.org/show_bug.cgi?id=199109). Fix this by letting __ppp_xmit_process() enqueue the skb to ppp->file.xq, so that we can check for recursion before adding it to the queue. Now ppp_xmit_process() can drop the packet when recursion is detected. __ppp_channel_push() is a bit special. It calls __ppp_xmit_process() without having any actual packet to send. This is used by ppp_output_wakeup() to re-enable transmission on the parent unit (for implementations like ppp_async.c, where the .start_xmit() function might not consume the skb, leaving it in ppp->xmit_pending and disabling transmission). Therefore, __ppp_xmit_process() needs to handle the case where skb is NULL, dequeuing as many packets as possible from ppp->file.xq. Reported-by: xu heng <xuheng333@zoho.com> Fixes: 55454a565836 ("ppp: avoid dealock on recursive xmit") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22ipv6: sr: fix NULL pointer dereference when setting encap source addressDavid Lebrun
When using seg6 in encap mode, we call ipv6_dev_get_saddr() to set the source address of the outer IPv6 header, in case none was specified. Using skb->dev can lead to BUG() when it is in an inconsistent state. This patch uses the net_device attached to the skb's dst instead. [940807.667429] BUG: unable to handle kernel NULL pointer dereference at 000000000000047c [940807.762427] IP: ipv6_dev_get_saddr+0x8b/0x1d0 [940807.815725] PGD 0 P4D 0 [940807.847173] Oops: 0000 [#1] SMP PTI [940807.890073] Modules linked in: [940807.927765] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G W 4.16.0-rc1-seg6bpf+ #2 [940808.028988] Hardware name: HP ProLiant DL120 G6/ProLiant DL120 G6, BIOS O26 09/06/2010 [940808.128128] RIP: 0010:ipv6_dev_get_saddr+0x8b/0x1d0 [940808.187667] RSP: 0018:ffff88043fd836b0 EFLAGS: 00010206 [940808.251366] RAX: 0000000000000005 RBX: ffff88042cb1c860 RCX: 00000000000000fe [940808.338025] RDX: 00000000000002c0 RSI: ffff88042cb1c860 RDI: 0000000000004500 [940808.424683] RBP: ffff88043fd83740 R08: 0000000000000000 R09: ffffffffffffffff [940808.511342] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88042cb1c850 [940808.598012] R13: ffffffff8208e380 R14: ffff88042ac8da00 R15: 0000000000000002 [940808.684675] FS: 0000000000000000(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000 [940808.783036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [940808.852975] CR2: 000000000000047c CR3: 00000004255fe000 CR4: 00000000000006e0 [940808.939634] Call Trace: [940808.970041] <IRQ> [940808.995250] ? ip6t_do_table+0x265/0x640 [940809.043341] seg6_do_srh_encap+0x28f/0x300 [940809.093516] ? seg6_do_srh+0x1a0/0x210 [940809.139528] seg6_do_srh+0x1a0/0x210 [940809.183462] seg6_output+0x28/0x1e0 [940809.226358] lwtunnel_output+0x3f/0x70 [940809.272370] ip6_xmit+0x2b8/0x530 [940809.313185] ? ac6_proc_exit+0x20/0x20 [940809.359197] inet6_csk_xmit+0x7d/0xc0 [940809.404173] tcp_transmit_skb+0x548/0x9a0 [940809.453304] __tcp_retransmit_skb+0x1a8/0x7a0 [940809.506603] ? ip6_default_advmss+0x40/0x40 [940809.557824] ? tcp_current_mss+0x24/0x90 [940809.605925] tcp_retransmit_skb+0xd/0x80 [940809.654016] tcp_xmit_retransmit_queue.part.17+0xf9/0x210 [940809.719797] tcp_ack+0xa47/0x1110 [940809.760612] tcp_rcv_established+0x13c/0x570 [940809.812865] tcp_v6_do_rcv+0x151/0x3d0 [940809.858879] tcp_v6_rcv+0xa5c/0xb10 [940809.901770] ? seg6_output+0xdd/0x1e0 [940809.946745] ip6_input_finish+0xbb/0x460 [940809.994837] ip6_input+0x74/0x80 [940810.034612] ? ip6_rcv_finish+0xb0/0xb0 [940810.081663] ipv6_rcv+0x31c/0x4c0 ... Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Reported-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel stateDavid Lebrun
The seg6_build_state() function is called with RCU read lock held, so we cannot use GFP_KERNEL. This patch uses GFP_ATOMIC instead. [ 92.770271] ============================= [ 92.770628] WARNING: suspicious RCU usage [ 92.770921] 4.16.0-rc4+ #12 Not tainted [ 92.771277] ----------------------------- [ 92.771585] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section! [ 92.772279] [ 92.772279] other info that might help us debug this: [ 92.772279] [ 92.773067] [ 92.773067] rcu_scheduler_active = 2, debug_locks = 1 [ 92.773514] 2 locks held by ip/2413: [ 92.773765] #0: (rtnl_mutex){+.+.}, at: [<00000000e5461720>] rtnetlink_rcv_msg+0x441/0x4d0 [ 92.774377] #1: (rcu_read_lock){....}, at: [<00000000df4f161e>] lwtunnel_build_state+0x59/0x210 [ 92.775065] [ 92.775065] stack backtrace: [ 92.775371] CPU: 0 PID: 2413 Comm: ip Not tainted 4.16.0-rc4+ #12 [ 92.775791] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014 [ 92.776608] Call Trace: [ 92.776852] dump_stack+0x7d/0xbc [ 92.777130] __schedule+0x133/0xf00 [ 92.777393] ? unwind_get_return_address_ptr+0x50/0x50 [ 92.777783] ? __sched_text_start+0x8/0x8 [ 92.778073] ? rcu_is_watching+0x19/0x30 [ 92.778383] ? kernel_text_address+0x49/0x60 [ 92.778800] ? __kernel_text_address+0x9/0x30 [ 92.779241] ? unwind_get_return_address+0x29/0x40 [ 92.779727] ? pcpu_alloc+0x102/0x8f0 [ 92.780101] _cond_resched+0x23/0x50 [ 92.780459] __mutex_lock+0xbd/0xad0 [ 92.780818] ? pcpu_alloc+0x102/0x8f0 [ 92.781194] ? seg6_build_state+0x11d/0x240 [ 92.781611] ? save_stack+0x9b/0xb0 [ 92.781965] ? __ww_mutex_wakeup_for_backoff+0xf0/0xf0 [ 92.782480] ? seg6_build_state+0x11d/0x240 [ 92.782925] ? lwtunnel_build_state+0x1bd/0x210 [ 92.783393] ? ip6_route_info_create+0x687/0x1640 [ 92.783846] ? ip6_route_add+0x74/0x110 [ 92.784236] ? inet6_rtm_newroute+0x8a/0xd0 Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge branch 'aquantia-fixes'David S. Miller
Igor Russkikh says: ==================== Aquantia atlantic hot fixes 03-2018 This is a set of atlantic driver hot fixes for various areas: Some issues with hardware reset covered, Fixed napi_poll flood happening on some traffic conditions, Allow system to change MAC address on live device, Add pci shutdown handler. patch v2: - reverse christmas tree - remove driver private parameter, replacing it with define. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: driver version bumpIgor Russkikh
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Implement pci shutdown callbackIgor Russkikh
We should close link and all NIC operations during shutdown. On some systems graceful reboot never closes NIC interface on its own, but only indicates pci device shutdown. Without explicit handler, NIC rx rings continued to transfer DMA data into prepared buffers while CPU rebooted already. That caused memory corruptions on soft reboot. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Allow live mac address changesIgor Russkikh
There is nothing prevents us from changing MAC on the running interface. Allow this with ndev priv flag. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Add tx clean budget and valid budget handling logicIgor Russkikh
We should report to napi full budget only when we have more job to do. Before this fix, on any tx queue cleanup we forced napi to do poll again. Thats a waste of cpu resources and caused storming with napi polls when there was at least one tx on each interrupt. With this fix we report full budget only when there is more job on TX to do. Or, as before, when rx budget was fully consumed. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Change inefficient wait loop on fw data readsIgor Russkikh
B1 hardware changes behavior of mailbox interface, it has busy bit always raised. Data ready condition should be detected by increment of address register. Old code has empty `for` loop, and that caused cpu overloads on B1 hardware. aq_nic_service_timer_cb consumed ~100ms because of that. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Fix a regression with reset on old firmwareIgor Russkikh
FW 1.5.58 and below needs a fixed delay even after 0x18 register is filled. Otherwise, setting MPI_INIT state too fast causes traffic hang. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: aquantia: Fix hardware reset when SPI may rarely hangupIgor Russkikh
Under some circumstances (notably using thunderbolt interface) SPI on chip reset may be in active transaction. Here we forcibly cleanup SPI to prevent possible hangups. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge branch 's390-qeth-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-03-20 Please apply one final set of qeth patches for 4.16. All of these fix long-standing bugs, so please queue them up for -stable as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: on channel error, reject further cmd requestsJulian Wiedmann
When the IRQ handler determines that one of the cmd IO channels has failed and schedules recovery, block any further cmd requests from being submitted. The request would inevitably stall, and prevent the recovery from making progress until the request times out. This sort of error was observed after Live Guest Relocation, where the pending IO on the READ channel intentionally gets terminated to kick-start recovery. Simultaneously the guest executed SIOCETHTOOL, triggering qeth to issue a QUERY CARD INFO command. The command then stalled in the inoperabel WRITE channel. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: lock read device while queueing next bufferJulian Wiedmann
For calling ccw_device_start(), issue_next_read() needs to hold the device's ccwlock. This is satisfied for the IRQ handler path (where qeth_irq() gets called under the ccwlock), but we need explicit locking for the initial call by the MPC initialization. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: when thread completes, wake up all waitersJulian Wiedmann
qeth_wait_for_threads() is potentially called by multiple users, make sure to notify all of them after qeth_clear_thread_running_bit() adjusted the thread_running_mask. With no timeout, callers would otherwise stall. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22s390/qeth: free netdevice when removing a cardJulian Wiedmann
On removal, a qeth card's netdevice is currently not properly freed because the call chain looks as follows: qeth_core_remove_device(card) lx_remove_device(card) unregister_netdev(card->dev) card->dev = NULL !!! qeth_core_free_card(card) if (card->dev) !!! free_netdev(card->dev) Fix it by free'ing the netdev straight after unregistering. This also fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()), where the need to free the current netdevice was not considered at all. Note that free_netdev() takes care of the netif_napi_del() for us too. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22Merge branch 'net-phy-Add-general-dummy-stubs-for-MMD-register-access'David S. Miller
Kevin Hao says: ==================== net: phy: Add general dummy stubs for MMD register access v2: As suggested by Andrew: - Add general dummy stubs - Also use that for the micrel phy This patch series fix the Ethernet broken on the mpc8315erdb board introduced by commit b6b5e8a69118 ("gianfar: Disable EEE autoneg by default"). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: phy: micrel: Use the general dummy stubs for MMD register accessKevin Hao
The new general dummy stubs for MMD register access were introduced. Use that for the codes reuse. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: phy: realtek: Use the dummy stubs for MMD register access for rtl8211bKevin Hao
The Ethernet on mpc8315erdb is broken since commit b6b5e8a69118 ("gianfar: Disable EEE autoneg by default"). The reason is that even though the rtl8211b doesn't support the MMD extended registers access, it does return some random values if we trying to access the MMD register via indirect method. This makes it seem that the EEE is supported by this phy device. And the subsequent writing to the MMD registers does cause the phy malfunction. So use the dummy stubs for the MMD register access to fix this issue. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 22:50:33 +0000