| Age | Commit message (Collapse) | Author |
|---|
|
am65_cpsw_nuss_register_ndevs() skips calling devlink_port_type_eth_set()
for ports without assigned netdev, triggering the following warning when
DEVLINK_PORT_TYPE_WARN_TIMEOUT elapses after 3600s:
Type was not set for devlink port.
WARNING: CPU: 0 PID: 129 at net/core/devlink.c:8095 devlink_port_type_warn+0x18/0x30
Fixes: 0680e20af5fb ("net: ethernet: ti: am65-cpsw: Fix devlink port register sequence")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.1
First set of fixes for v6.1. Quite a lot of fixes in stack but also
for mt76.
cfg80211/mac80211
- fix locking error in mac80211's hw addr change
- fix TX queue stop for internal TXQs
- handling of very small (e.g. STP TCN) packets
- two memcpy() hardening fixes
- fix probe request 6 GHz capability warning
- fix various connection prints
- fix decapsulation offload for AP VLAN
mt76
- fix rate reporting, LLC packets and receive checksum offload on specific chipsets
iwlwifi
- fix crash due to list corruption
ath11k
- fix a compiler warning with GCC 11 and KASAN
* tag 'wireless-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: ath11k: mac: fix reading 16 bytes from a region of size 0 warning
wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases)
wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921
wifi: mt76: fix receiving LLC packets on mt7615/mt7915
wifi: nl80211: Split memcpy() of struct nl80211_wowlan_tcp_data_token flexible array
wifi: wext: use flex array destination for memcpy()
wifi: cfg80211: fix ieee80211_data_to_8023_exthdr handling of small packets
wifi: mac80211: netdev compatible TX stop for iTXQ drivers
wifi: mac80211: fix decap offload for stations on AP_VLAN interfaces
wifi: mac80211: unlock on error in ieee80211_can_powered_addr_change()
wifi: mac80211: remove/avoid misleading prints
wifi: mac80211: fix probe req HE capabilities access
wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx
wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer
====================
Link: https://lore.kernel.org/r/20221011163123.A093CC433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-10-11
this is a pull request of 4 patches for net/main.
Anssi Hannula and Jimmy Assarsson contribute 4 patches for the
kvaser_usb driver. A check for actual received length of USB transfers
is added, the use of an uninitialized completion is fixed, the TX
queue is re-synced after restart, and the CAN state is fixed after
restart.
* tag 'linux-can-fixes-for-6.1-20221011' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_usb_leaf: Fix CAN state after restart
can: kvaser_usb_leaf: Fix TX queue out of sync after restart
can: kvaser_usb: Fix use of uninitialized completion
can: kvaser_usb_leaf: Fix overread with an invalid command
====================
Link: https://lore.kernel.org/r/20221011074815.397301-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Linaro reported stringop-overread warnings in ath11k (this is one of many):
drivers/net/wireless/ath/ath11k/mac.c:2238:29: error: 'ath11k_peer_assoc_h_he_limit' reading 16 bytes from a region of size 0 [-Werror=stringop-overread]
My further investigation showed that these warnings happen on GCC 11.3 but not
with GCC 12.2, and with only the kernel config Linaro provided:
https://builds.tuxbuild.com/2F4W7nZHNx3T88RB0gaCZ9hBX6c/config
I saw the same warnings both with arm64 and x86_64 builds and KASAN seems to be
the reason triggering these warnings with GCC 11. Nobody else has reported
this so this seems to be quite rare corner case. I don't know what specific
commit started emitting this warning so I can't provide a Fixes tag. The
function hasn't been touched for a year.
I decided to workaround this by converting the pointer to a new array in stack,
and then copying the data to the new array. It's only 16 bytes anyway and this
is executed during association, so not in a hotpath.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/all/CA+G9fYsZ_qypa=jHY_dJ=tqX4515+qrV9n2SWXVDHve826nF7Q@mail.gmail.com/
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221010160638.20152-1-kvalo@kernel.org
|
|
cases)
BUGs like this are still reproducible:
[ 31.509616] list_add corruption. prev->next should be next (ffff8f8644242300), but was ffff8f86493fd300. (prev=ffff8f86493fd300).
[ 31.521544] ------------[ cut here ]------------
[ 31.526248] kernel BUG at lib/list_debug.c:30!
[ 31.530781] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 31.535831] CPU: 1 PID: 626 Comm: wpa_supplicant Not tainted 6.0.0+ #7
[ 31.542450] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012
[ 31.550484] RIP: 0010:__list_add_valid.cold+0x3a/0x5b
[ 31.555537] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 28 20 69 89 e8 4c e3 fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 d0 1f 69 89 e8 35 e3 fd ff <0f> 0b 4c 89 c1 48 c7 c7 78 1f 69 89 e8 24 e3 fd ff 0f 0b 48 c7 c7
[ 31.574605] RSP: 0018:ffff9f6f00dc3748 EFLAGS: 00010286
[ 31.579990] RAX: 0000000000000075 RBX: ffff8f8644242080 RCX: 0000000000000000
[ 31.587155] RDX: 0000000000000201 RSI: ffffffff8967862d RDI: 00000000ffffffff
[ 31.594482] RBP: ffff8f86493fd2e8 R08: 0000000000000000 R09: 00000000ffffdfff
[ 31.601735] R10: ffff9f6f00dc3608 R11: ffffffff89f46128 R12: ffff8f86493fd300
[ 31.608986] R13: ffff8f86493fd300 R14: ffff8f8644242300 R15: ffff8f8643dd3f2c
[ 31.616151] FS: 00007f3bb9a707c0(0000) GS:ffff8f865a300000(0000) knlGS:0000000000000000
[ 31.624447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 31.630286] CR2: 00007fe3647d5600 CR3: 00000001125a6002 CR4: 00000000000606e0
[ 31.637539] Call Trace:
[ 31.639936] <TASK>
[ 31.642143] iwl_mvm_mac_wake_tx_queue+0x71/0x90 [iwlmvm]
[ 31.647569] ieee80211_queue_skb+0x4b6/0x720 [mac80211]
...
So, it is necessary to extend the applied solution with commit 14a3aacf517a9
("iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue")
to all other cases where the station queues are invalidated and the related
lists are not emptied. Because, otherwise as before, if some new element is
added later to the list in iwl_mvm_mac_wake_tx_queue, it can match with the
old one and produce the same commented BUG.
That is, in order to avoid this problem completely, we must also remove the
related lists for the other cases when station queues are invalidated.
Fixes: cfbc6c4c5b91c ("iwlwifi: mvm: support mac80211 TXQs model")
Reported-by: Petr Stourac <pstourac@redhat.com>
Tested-by: Petr Stourac <pstourac@redhat.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221010081611.145027-1-jtornosm@redhat.com
|
|
Checking the relevant rxd bits for the checksum information only indicates
if the checksum verification was performed by the hardware and doesn't show
actual checksum errors. Checksum errors are indicated in the info field of
the DMA descriptor. Fix packets erroneously marked as CHECKSUM_UNNECESSARY
by checking the extra bits as well.
Those bits are only passed to the driver for MMIO devices at the moment, so
limit checksum offload to those.
Fixes: 2122dfbfd0bd ("mt76: mt7615: add rx checksum offload support")
Fixes: 94244d2ea503 ("mt76: mt7915: add rx checksum offload support")
Fixes: 0e75732764e8 ("mt76: mt7921: enable rx csum offload")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221005130824.23371-2-nbd@nbd.name
|
|
When 802.3 decap offload is enabled, the hardware indicates header translation
failure, whenever either the LLC-SNAP header was not found, or a VLAN header
with an unregcognized tag is present.
In that case, the hardware inserts a 2-byte length fields after the MAC
addresses. For VLAN packets, this tag needs to be removed. However,
for 802.3 LLC packets, the length bytes should be preserved, since there
is no separate ethertype field in the data.
This fixes an issue where the length field was omitted for LLC frames, causing
them to be malformed after hardware decap.
Fixes: 1eeff0b4c1a6 ("mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221005130824.23371-1-nbd@nbd.name
|
|
Jimmy Assarsson <extja@kvaser.com> says:
Changes in v5: https://lore.kernel.org/all/20221010150829.199676-1-extja@kvaser.com
- Split series [1], kept only critical bug fixes that should go into
stable, since v4 got rejected [2].
Non-critical fixes are posted in a separate series.
Changes in v4: https://lore.kernel.org/all/20220903182344.139-1-extja@kvaser.com
- Add Tested-by: Anssi Hannula to
[PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
- Update commit message in
[PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
Changes in v3: https://lore.kernel.org/all/20220901122729.271-1-extja@kvaser.com
- Rebase on top of commit
1d5eeda23f36 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support")
- Add Tested-by: Anssi Hannula
- Add stable@vger.kernel.org to CC.
- Add my S-o-b to all patches
- Fix regression introduced in
[PATCH v2 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
found by Anssi Hannula
https://lore.kernel.org/all/b25bc059-d776-146d-0b3c-41aecf4bd9f8@bitwise.fi
v2: https://lore.kernel.org/all/20220708115709.232815-1-extja@kvaser.com
v1: https://lore.kernel.org/all/20220516134748.3724796-1-anssi.hannula@bitwise.fi
[1] https://lore.kernel.org/linux-can/20220903182344.139-1-extja@kvaser.com
[2] https://lore.kernel.org/linux-can/20220920192708.jcvyph3ec7lscuqj@pengutronix.de
Link: https://lore.kernel.org/all/20221010150829.199676-1-extja@kvaser.com
[mkl: add/update links]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_restart() expects CMD_START_CHIP to set the error state to
ERROR_ACTIVE as it calls netif_carrier_on() immediately afterwards.
Otherwise the user may immediately trigger restart again and hit a
BUG_ON() in can_restart().
Fix kvaser_usb_leaf set_mode(CMD_START_CHIP) to set the expected state.
Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The TX queue seems to be implicitly flushed by the hardware during
bus-off or bus-off recovery, but the driver does not reset the TX
bookkeeping.
Despite not resetting TX bookkeeping the driver still re-enables TX
queue unconditionally, leading to "cannot find free context" /
NETDEV_TX_BUSY errors if the TX queue was full at bus-off time.
Fix that by resetting TX bookkeeping on CAN restart.
Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.
Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and
completed when the device sends CMD_FLUSH_QUEUE_RESP.
This causes completion of uninitialized completion if the device sends
CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a
response to a flush by a previously bound driver, or a misbehaving
device).
Fix that by initializing flush_comp in kvaser_usb_init_one() like the
other completions.
This issue is only triggerable after RX URBs have been set up, i.e. the
interface has been opened at least once.
Cc: stable@vger.kernel.org
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
For command events read from the device,
kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not
exceed the size of the received data, but the actual kvaser_cmd handlers
will happily read any kvaser_cmd fields without checking for cmd->len.
This can cause an overread if the last cmd in the buffer is shorter than
expected for the command type (with cmd->len showing the actual short
size).
Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of
which are delivered to userspace as-is.
Fix that by verifying the length of command before handling it.
This issue can only occur after RX URBs have been set up, i.e. the
interface has been opened at least once.
Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Looks like a copy-paste error sneaked in here at some point,
causing the key_size for these tunnels to be calculated
incorrectly. This size ends up being send to the firmware,
causing unexpected behaviour in some cases.
Fixes: 78a722af4ad9 ("nfp: flower: compile match for IPv6 tunnels")
Reported-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221007092132.218386-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fill in also 5gbase-r and 25gbase-r PHY interface modes into the
phy_interface_t bitmap in sfp_parse_support().
Fixes: fd580c983031 ("net: sfp: augment SFP parsing with phy_interface_t bitmap")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221007084844.20352-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The original commit that added support for the SYSTEMPORT Lite variant
halved the number of RX descriptors due to a confusion between the
number of descriptors and the number of descriptor words. There are 512
descriptor *words* which means 256 descriptors total.
Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221007034201.4126054-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes: 13defa275eef ("net: marvell: prestera: Add matchall support")
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Link: https://lore.kernel.org/r/20221006190600.881740-1-maksym.glubokiy@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In error path after calling cn10k_mcs_init(), cn10k_mcs_free() need
be called to avoid memory leak.
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Destroy code doesn't remove symlink for ttyGNSS2 device introduced
earlier. Add cleanup code.
Fixes: 71d7e0850476 ("ptp: ocp: Add second GNSS device")
Signed-off-by: Vadim Fedorenko <vadfed@fb.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If alloc_mem() fails in mcs_register_interrupts(), it should return error
code.
Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix wrong pointer passed to PTR_ERR() in dsa_port_phylink_create() to print
error message.
Fixes: cf5ca4ddc37a ("net: dsa: don't leave dangling pointers in dp->pl when failing")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the missing unlock in some error paths.
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
macvlan should enforce a minimal mtu of 68, even at link creation.
This patch avoids the current behavior (which could lead to crashes
in ipv6 stack if the link is brought up)
$ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail !
$ ip link sh dev macvlan1
5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop
state DOWN mode DEFAULT group default qlen 1000
link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff
$ ip link set macvlan1 mtu 67
Error: mtu less than device minimum.
$ ip link set macvlan1 mtu 68
$ ip link set macvlan1 mtu 8
Error: mtu less than device minimum.
Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function hfcpci_softirq() is a timer handler. If it
is running, the timer_pending() will return 0 and the
del_timer_sync() in HFC_cleanup() will not be executed.
As a result, the use-after-free bug will happen. The
process is shown below:
(cleanup routine) | (timer handler)
HFC_cleanup() | hfcpci_softirq()
if (timer_pending(&hfc_tl)) |
del_timer_sync() |
... | ...
pci_unregister_driver(hc) |
driver_unregister | driver_for_each_device
bus_remove_driver | _hfcpci_softirq
driver_detach | ...
put_device(dev) //[1]FREE |
| dev_get_drvdata(dev) //[2]USE
The device is deallocated is position [1] and used in
position [2].
Fix by removing the "timer_pending" check in HFC_cleanup(),
which makes sure that the hfcpci_softirq() have finished
before the resource is deallocated.
Fixes: 009fc857c5f6 ("mISDN: fix possible use-after-free in HFC_cleanup()")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
flexible array
To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), split the memcpy() of the header and the payload
so no false positive run-time overflow warning will be generated.
[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Syzkaller reports buffer overflow false positive as follows:
------------[ cut here ]------------
memcpy: detected field-spanning write (size 8) of single field
"&compat_event->pointer" at net/wireless/wext-core.c:623 (size 4)
WARNING: CPU: 0 PID: 3607 at net/wireless/wext-core.c:623
wireless_send_event+0xab5/0xca0 net/wireless/wext-core.c:623
Modules linked in:
CPU: 1 PID: 3607 Comm: syz-executor659 Not tainted
6.0.0-rc6-next-20220921-syzkaller #0
[...]
Call Trace:
<TASK>
ioctl_standard_call+0x155/0x1f0 net/wireless/wext-core.c:1022
wireless_process_ioctl+0xc8/0x4c0 net/wireless/wext-core.c:955
wext_ioctl_dispatch net/wireless/wext-core.c:988 [inline]
wext_ioctl_dispatch net/wireless/wext-core.c:976 [inline]
wext_handle_ioctl+0x26b/0x280 net/wireless/wext-core.c:1049
sock_ioctl+0x285/0x640 net/socket.c:1220
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
Wireless events will be sent on the appropriate channels in
wireless_send_event(). Different wireless events may have different
payload structure and size, so kernel uses **len** and **cmd** field
in struct __compat_iw_event as wireless event common LCP part, uses
**pointer** as a label to mark the position of remaining different part.
Yet the problem is that, **pointer** is a compat_caddr_t type, which may
be smaller than the relative structure at the same position. So during
wireless_send_event() tries to parse the wireless events payload, it may
trigger the memcpy() run-time destination buffer bounds checking when the
relative structure's data is copied to the position marked by **pointer**.
This patch solves it by introducing flexible-array field **ptr_bytes**,
to mark the position of the wireless events remaining part next to
LCP part. What's more, this patch also adds **ptr_len** variable in
wireless_send_event() to improve its maintainability.
Reported-and-tested-by: syzbot+473754e5af963cf014cf@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/00000000000070db2005e95a5984@google.com/
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
STP topology change notification packets only have a payload of 7 bytes,
so they get dropped due to the skb->len < hdrlen + 8 check.
Fix this by removing the extra 8 from the skb->len check and checking the
return code on the skb_copy_bits calls.
Fixes: 2d1c304cb2d5 ("cfg80211: add function for 802.3 conversion with separate output buffer")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Properly handle TX stop for internal queues (iTXQs) within mac80211.
mac80211 must not stop netdev queues when using mac80211 iTXQs.
For these drivers the netdev interface is created with IFF_NO_QUEUE.
While netdev still drops frames for IFF_NO_QUEUE interfaces when we stop
the netdev queues, it also prints a warning when this happens:
Assuming the mac80211 interface is called wlan0 we would get
"Virtual device wlan0 asks to queue packet!" when netdev has to drop a
frame.
This patch is keeping the harmless netdev queue starts for iTXQ drivers.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since AP_VLAN interfaces are not passed to the driver, check offload_flags
on the bss vif instead.
Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Fixes: 80a915ec4427 ("mac80211: add rx decapsulation offload support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Unlock before returning -EOPNOTSUPP.
Fixes: 3c06e91b40db ("wifi: mac80211: Support POWERED_ADDR_CHANGE feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
At some point a few kernel debug prints started appearing which
indicated something was sending invalid IEs:
"bad VHT capabilities, disabling VHT"
"Invalid HE elem, Disable HE"
Turns out these were being printed because the local hardware
supported HE/VHT but the peer/AP did not. Bad/invalid indicates,
to me at least, that the IE is in some way malformed, not missing.
For the HE print (ieee80211_verify_peer_he_mcs_support) it will
now silently fail if the HE capability element is missing (still
prints if the element size is wrong).
For the VHT print, it has been removed completely and will silently
set the DISABLE_VHT flag which is consistent with how DISABLE_HT
is set.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When building the probe request IEs HE support is checked for
the 6GHz band (wiphy->bands[NL80211_BAND_6GHZ]). If supported
the HE capability IE should be included according to the spec.
The problem is the 16-bit capability is obtained from the
band object (sband) that was passed in, not the 6GHz band
object (sband6). If the sband object doesn't support HE it will
result in a warning.
Fixes: 7d29bc50b30e ("mac80211: always include HE 6GHz capability in probe request")
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since STP TCN frames are only 7 bytes, the pskb_may_pull call returns an error.
Instead of dropping those packets, bump them back to the slow path for proper
processing.
Fixes: 49ddf8e6e234 ("mac80211: add fast-rx path")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
GCC-12 emits false positive -Warray-bounds warnings with
CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1],
and there is top-level Makefile logic to remove -Warray-bounds for
known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable
'-Warray-bounds' universally for now").
Remove the local work-around.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
GCC-12 emits false positive -Warray-bounds warnings with
CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1],
and there is top-level Makefile logic to remove -Warray-bounds for
known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable
'-Warray-bounds' universally for now").
Remove the local work-around.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If you try to create a 'mirror' ACL rule on a port that already has a
mirror rule, prestera_span_rule_add() will fail with EEXIST error.
This forces rollback procedure which destroys existing mirror rule on
hardware leaving it visible in linux.
Add an explicit check for EEXIST to prevent the deletion of the existing
rule but keep user seeing error message:
$ tc filter add dev sw1p1 ... skip_sw action mirred egress mirror dev sw1p2
$ tc filter add dev sw1p1 ... skip_sw action mirred egress mirror dev sw1p3
RTNETLINK answers: File exists
We have an error talking to the kernel
Fixes: 13defa275eef ("net: marvell: prestera: Add matchall support")
Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
reference
Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match:
fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961
fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753
inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874
Separate nexthop objects are mutually exclusive with the legacy
multipath spec. Fix fib_nh_match to return if the config for the
to be deleted route contains a multipath spec while the fib_info
is using a nexthop object.
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e690 ("net: ipv4: fix route with nexthop object delete warning")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net/pkt_sched.h is included twice in enetc_qos.c,
remove one of them.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2334
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Semicolon is not required after curly braces.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2332
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During vm boot, there might be possibility that vf registration
call comes before the vf association from host to vm.
And this might break netvsc vf path, To prevent the same block
vf registration until vf bind message comes from host.
Cc: stable@vger.kernel.org
Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds handling to return -EINVAL for an unknown addr type. The
current behaviour is to return 0 as successful but the size of an
unknown addr type is not defined and should return an error like -EINVAL.
Fixes: 94160108a70c ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Jan as maintainer for Shared Memory Communications (SMC)
Sockets.
Acked-by: Jan Karcher <jaka@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mt7915 and newer need to report the rate_info that's stored in wcid->rate,
since they don't fill info->status.rates.
Cc: Jonas Jelonek <jelonek.jonas@gmail.com>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/all/CABXGCsP0znm9pS-MiKtyxTXR7XiyFVqen0qzNpicGHDZKCzbwg@mail.gmail.com/
Fixes: 44fa75f207d8 ("mac80211: extend current rate control tx status API")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220927093823.6007-1-nbd@nbd.name
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-10-05
Only two patches this time around. A revert from Alexander Aring to a patch
that hit net and the updated patch to fix the problem from Tetsuo Handa.
* tag 'ieee802154-for-net-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
net/ieee802154: don't warn zero-sized raw_sendmsg()
Revert "net/ieee802154: reject zero-sized raw_sendmsg()"
====================
Link: https://lore.kernel.org/r/20221005144508.787376-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check whether this driver actually is the intended recipient of
upper change event.
Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20221003111636.54973-1-alexandru.tachici@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Missing space between "pins'" and "strength"
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20221004073242.304425-1-casper.casan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Regulator based PSE controller driver relies on regulator support to
be enabled. If regulator support is disabled, it will still compile
fine, but won't operate correctly.
Hence add a dependency on REGULATOR, to prevent asking the user about
this driver when configuring a kernel without regulator support.
Fixes: 66741b4e94ca7bb1 ("net: pse-pd: add regulator based PSE driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/709caac8873ff2a8b72b92091429be7c1a939959.1664900558.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
child qdiscs"
taprio_attach() has this logic at the end, which should have been
removed with the blamed patch (which is now being reverted):
/* access to the child qdiscs is not needed in offload mode */
if (FULL_OFFLOAD_IS_ENABLED(q->flags)) {
kfree(q->qdiscs);
q->qdiscs = NULL;
}
because otherwise, we make use of q->qdiscs[] even after this array was
deallocated, namely in taprio_leaf(). Therefore, whenever one would try
to attach a valid child qdisc to a fully offloaded taprio root, one
would immediately dereference a NULL pointer.
$ tc qdisc replace dev eno0 handle 8001: parent root taprio \
num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
max-sdu 0 0 0 0 0 200 0 0 \
base-time 200 \
sched-entry S 80 20000 \
sched-entry S a0 20000 \
sched-entry S 5f 60000 \
flags 2
$ max_frame_size=1500
$ data_rate_kbps=20000
$ port_transmit_rate_kbps=1000000
$ idleslope=$data_rate_kbps
$ sendslope=$(($idleslope - $port_transmit_rate_kbps))
$ locredit=$(($max_frame_size * $sendslope / $port_transmit_rate_kbps))
$ hicredit=$(($max_frame_size * $idleslope / $port_transmit_rate_kbps))
$ tc qdisc replace dev eno0 parent 8001:7 cbs \
idleslope $idleslope \
sendslope $sendslope \
hicredit $hicredit \
locredit $locredit \
offload 0
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
pc : taprio_leaf+0x28/0x40
lr : qdisc_leaf+0x3c/0x60
Call trace:
taprio_leaf+0x28/0x40
tc_modify_qdisc+0xf0/0x72c
rtnetlink_rcv_msg+0x12c/0x390
netlink_rcv_skb+0x5c/0x130
rtnetlink_rcv+0x1c/0x2c
The solution is not as obvious as the problem. The code which deallocates
q->qdiscs[] is in fact copied and pasted from mqprio, which also
deallocates the array in mqprio_attach() and never uses it afterwards.
Therefore, the identical cleanup logic of priv->qdiscs[] that
mqprio_destroy() has is deceptive because it will never take place at
qdisc_destroy() time, but just at raw ops->destroy() time (otherwise
said, priv->qdiscs[] do not last for the entire lifetime of the mqprio
root), but rather, this is just the twisted way in which the Qdisc API
understands error path cleanup should be done (Qdisc_ops :: destroy() is
called even when Qdisc_ops :: init() never succeeded).
Side note, in fact this is also what the comment in mqprio_init() says:
/* pre-allocate qdisc, attachment can't fail */
Or reworded, mqprio's priv->qdiscs[] scheme is only meant to serve as
data passing between Qdisc_ops :: init() and Qdisc_ops :: attach().
[ this comment was also copied and pasted into the initial taprio
commit, even though taprio_attach() came way later ]
The problem is that taprio also makes extensive use of the q->qdiscs[]
array in the software fast path (taprio_enqueue() and taprio_dequeue()),
but it does not keep a reference of its own on q->qdiscs[i] (you'd think
that since it creates these Qdiscs, it holds the reference, but nope,
this is not completely true).
To understand the difference between taprio_destroy() and mqprio_destroy()
one must look before commit 13511704f8d7 ("net: taprio offload: enforce
qdisc to netdev queue mapping"), because that just muddied the waters.
In the "original" taprio design, taprio always attached itself (the root
Qdisc) to all netdev TX queues, so that dev_qdisc_enqueue() would go
through taprio_enqueue().
It also called qdisc_refcount_inc() on itself for as many times as there
were netdev TX queues, in order to counter-balance what tc_get_qdisc()
does when destroying a Qdisc (simplified for brevity below):
if (n->nlmsg_type == RTM_DELQDISC)
err = qdisc_graft(dev, parent=NULL, new=NULL, q, extack);
qdisc_graft(where "new" is NULL so this deletes the Qdisc):
for (i = 0; i < num_q; i++) {
struct netdev_queue *dev_queue;
dev_queue = netdev_get_tx_queue(dev, i);
old = dev_graft_qdisc(dev_queue, new);
if (new && i > 0)
qdisc_refcount_inc(new);
qdisc_put(old);
~~~~~~~~~~~~~~
this decrements taprio's refcount once for each TX queue
}
notify_and_destroy(net, skb, n, classid,
rtnl_dereference(dev->qdisc), new);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and this finally decrements it to zero,
making qdisc_put() call qdisc_destroy()
The q->qdiscs[] created using qdisc_create_dflt() (or their
replacements, if taprio_graft() was ever to get called) were then
privately freed by taprio_destroy().
This is still what is happening after commit 13511704f8d7 ("net: taprio
offload: enforce qdisc to netdev queue mapping"), but only for software
mode.
In full offload mode, the per-txq "qdisc_put(old)" calls from
qdisc_graft() now deallocate the child Qdiscs rather than decrement
taprio's refcount. So when notify_and_destroy(taprio) finally calls
taprio_destroy(), the difference is that the child Qdiscs were already
deallocated.
And this is exactly why the taprio_attach() comment "access to the child
qdiscs is not needed in offload mode" is deceptive too. Not only the
q->qdiscs[] array is not needed, but it is also necessary to get rid of
it as soon as possible, because otherwise, we will also call qdisc_put()
on the child Qdiscs in qdisc_destroy() -> taprio_destroy(), and this
will cause a nasty use-after-free/refcount-saturate/whatever.
In short, the problem is that since the blamed commit, taprio_leaf()
needs q->qdiscs[] to not be freed by taprio_attach(), while qdisc_destroy()
-> taprio_destroy() does need q->qdiscs[] to be freed by taprio_attach()
for full offload. Fixing one problem triggers the other.
All of this can be solved by making taprio keep its q->qdiscs[i] with a
refcount elevated at 2 (in offloaded mode where they are attached to the
netdev TX queues), both in taprio_attach() and in taprio_graft(). The
generic qdisc_graft() would just decrement the child qdiscs' refcounts
to 1, and taprio_destroy() would give them the final coup de grace.
However the rabbit hole of changes is getting quite deep, and the
complexity increases. The blamed commit was supposed to be a bug fix in
the first place, and the bug it addressed is not so significant so as to
justify further rework in stable trees. So I'd rather just revert it.
I don't know enough about multi-queue Qdisc design to make a proper
judgement right now regarding what is/isn't idiomatic use of Qdisc
concepts in taprio. I will try to study the problem more and come with a
different solution in net-next.
Fixes: 1461d212ab27 ("net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs")
Reported-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20221004220100.1650558-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot is hitting skb_assert_len() warning at __dev_queue_xmit() [1],
for PF_IEEE802154 socket's zero-sized raw_sendmsg() request is hitting
__dev_queue_xmit() with skb->len == 0.
Since PF_IEEE802154 socket's zero-sized raw_sendmsg() request was
able to return 0, don't call __dev_queue_xmit() if packet length is 0.
----------
#include <sys/socket.h>
#include <netinet/in.h>
int main(int argc, char *argv[])
{
struct sockaddr_in addr = { .sin_family = AF_INET, .sin_addr.s_addr = htonl(INADDR_LOOPBACK) };
struct iovec iov = { };
struct msghdr hdr = { .msg_name = &addr, .msg_namelen = sizeof(addr), .msg_iov = &iov, .msg_iovlen = 1 };
sendmsg(socket(PF_IEEE802154, SOCK_RAW, 0), &hdr, 0);
return 0;
}
----------
Note that this might be a sign that commit fd1894224407c484 ("bpf: Don't
redirect packets with invalid pkt_len") should be reverted, for
skb->len == 0 was acceptable for at least PF_IEEE802154 socket.
Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4 [1]
Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com>
Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221005014750.3685555-2-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
This reverts commit 3a4d061c699bd3eedc80dc97a4b2a2e1af83c6f5.
There is a v2 which does return zero if zero length is given.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221005014750.3685555-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
|
