summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-30ionic: check for queues before deletingShannon Nelson
Make sure the queue structures exist before trying to delete them. This addresses a couple of error recovery issues. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: clean tx queue of unfinished requestsShannon Nelson
Clean out tx requests that didn't get finished before shutting down the queue. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: move irq request to qcq allocShannon Nelson
Move the irq request and free out of the qcq_init and deinit and into the alloc and free routines where they belong for better resource management. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: move debugfs add/delete to match alloc/freeShannon Nelson
Move the qcq debugfs add to the queue alloc, and likewise move the debugfs delete to the queue free. The LIF debugfs add also needs to be moved, but the del is already in the LIF free. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: check for linkup in watchdogShannon Nelson
Add a link_status_check to the heartbeat watchdog. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: decouple link message from netdev stateShannon Nelson
Rearrange the link_up/link_down messages so that we announce link up when we first notice that the link is up when the driver loads, and decouple the link_up/link_down messages from the UP and DOWN netdev state. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30mlxsw: spectrum_ptp: Fix build warningsIdo Schimmel
Cited commit extended the enums 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' with values that were not accounted for in the switch statements, resulting in the build warnings below. Fix by adding a default case. drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c: In function ‘mlxsw_sp_ptp_get_message_types’: drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:915:2: warning: enumeration value ‘__HWTSTAMP_TX_CNT’ not handled in switch [-Wswitch] 915 | switch (tx_type) { | ^~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:927:2: warning: enumeration value ‘__HWTSTAMP_FILTER_CNT’ not handled in switch [-Wswitch] 927 | switch (rx_filter) { | ^~~~~~ Fixes: f76510b458a5 ("ethtool: add timestamping related string sets") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Online capacity resizing (Balbir) - Number of hardware queue change fixes (Bart) - null_blk fault injection addition (Bart) - Cleanup of queue allocation, unifying the node/no-node API (Christoph) - Cleanup of genhd, moving code to where it makes sense (Christoph) - Cleanup of the partition handling code (Christoph) - disk stat fixes/improvements (Konstantin) - BFQ improvements (Paolo) - Various fixes and improvements * tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits) block: return NULL in blk_alloc_queue() on error block: move bio_map_* to blk-map.c Revert "blkdev: check for valid request queue before issuing flush" block: simplify queue allocation bcache: pass the make_request methods to blk_queue_make_request null_blk: use blk_mq_init_queue_data block: add a blk_mq_init_queue_data helper block: move the ->devnode callback to struct block_device_operations block: move the part_stat* helpers from genhd.h to a new header block: move block layer internals out of include/linux/genhd.h block: move guard_bio_eod to bio.c block: unexport get_gendisk block: unexport disk_map_sector_rcu block: unexport disk_get_part block: mark part_in_flight and part_in_flight_rw static block: mark block_depr static block: factor out requeue handling from dispatch code block/diskstats: replace time_in_queue with sum of request times block/diskstats: accumulate all per-cpu counters in one pass block/diskstats: more accurate approximation of io_ticks for slow disks ...
2020-03-30Merge branch 'Devlink-health-auto-attributes-refactor'David S. Miller
Eran Ben Elisha says: ==================== Devlink health auto attributes refactor This patchset refactors the auto-recover health reporter flag to be explicitly set by the devlink core. In addition, add another flag to control auto-dump attribute, also to be explicitly set by the devlink core. For that, patch 0001 changes the auto-recover default value of netdevsim dummy reporter. After reporter registration, both flags can be altered be administrator only. Changes since v1: - Change default behaviour of netdevsim dummy reporter - Move initialization of DEVLINK_ATTR_HEALTH_REPORTER_AUTO_DUMP ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30devlink: Add auto dump flag to health reporterEran Ben Elisha
On low memory system, run time dumps can consume too much memory. Add administrator ability to disable auto dumps per reporter as part of the error flow handle routine. This attribute is not relevant while executing DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET. By default, auto dump is activated for any reporter that has a dump method, as part of the reporter registration to devlink. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30devlink: Implicitly set auto recover flag when registering health reporterEran Ben Elisha
When health reporter is registered to devlink, devlink will implicitly set auto recover if and only if the reporter has a recover method. No reason to explicitly get the auto recover flag from the driver. Remove this flag from all drivers that called devlink_health_reporter_create. All existing health reporters set auto recovery to true if they have a recover method. Yet, administrator can unset auto recover via netlink command as prior to this patch. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30netdevsim: Change dummy reporter auto recover defaultEran Ben Elisha
Health reporters should be registered with auto recover set to true. Align dummy reporter behaviour with that, as in later patch the option to set auto recover behaviour will be removed. In addition, align netdevsim selftest to the new default value. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ptp: Avoid deadlocks in the programmable pin code.Richard Cochran
The PTP Hardware Clock (PHC) subsystem offers an API for configuring programmable pins. User space sets or gets the settings using ioctls, and drivers verify dialed settings via a callback. Drivers may also query pin settings by calling the ptp_find_pin() method. Although the core subsystem protects concurrent access to the pin settings, the implementation places illogical restrictions on how drivers may call ptp_find_pin(). When enabling an auxiliary function via the .enable(on=1) callback, drivers may invoke the pin finding method, but when disabling with .enable(on=0) drivers are not permitted to do so. With the exception of the mv88e6xxx, all of the PHC drivers do respect this restriction, but still the locking pattern is both confusing and unnecessary. This patch changes the locking implementation to allow PHC drivers to freely call ptp_find_pin() from their .enable() and .verify() callbacks. V2 ChangeLog: - fixed spelling in the kernel doc - add Vladimir's tested by tag Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reported-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge tag 'for-5.7/libata-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata updates from Jens Axboe: - Series from Bart, making the libata code smaller on PATA only setups. This is useful for smaller/embedded use cases, and will help us move some of those off drivers/ide. - Kill unused BPRINTK() (Hannes) - Add various Comet Lake ahci PCI ids (Kai-Heng, Mika) - Fix for a double scsi_host_put() in error handling (John) - Use scnprintf (Takashi) - Assign OF node to the SCSI device (Linus Walleij) * tag 'for-5.7/libata-2020-03-29' of git://git.kernel.dk/linux-block: (36 commits) ata: make "libata.force" kernel parameter optional ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c ata: start separating SATA specific code from libata-eh.c ata: move ata_sas_*() to libata-sata.c ata: start separating SATA specific code from libata-scsi.c ata: move sata_deb_timing_*() to libata-sata.c ata: move ata_qc_complete_multiple() to libata-sata.c ata: move sata_link_hardreset() to libata-sata.c ata: move sata_link_{debounce,resume}() to libata-sata.c ata: move *sata_set_spd*() to libata-sata.c ata: move sata_scr_*() to libata-sata.c ata: start separating SATA specific code from libata-core.c ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() ata: separate PATA timings code from libata-core.c ata: fix CodingStyle issues in PATA timings code ata: remove EXPORT_SYMBOL_GPL()s not used by modules ata: move EXPORT_SYMBOL_GPL()s close to exported code ata: optimize ata_scsi_rbuf[] size ...
2020-03-30net: devlink: use NL_SET_ERR_MSG_MOD instead of NL_SET_ERR_MSGJiri Pirko
The rest of the devlink code sets the extack message using NL_SET_ERR_MSG_MOD. Change the existing appearances of NL_SET_ERR_MSG to NL_SET_ERR_MSG_MOD. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge branch 'net-sched-expose-HW-stats-types-per-action-used-by-drivers'David S. Miller
Jiri Pirko says: ==================== net: sched: expose HW stats types per action used by drivers The first patch is just adding a helper used by the second patch too. The second patch is exposing HW stats types that are used by drivers. Example: $ tc filter add dev enp3s0np1 ingress proto ip handle 1 pref 1 flower dst_ip 192.168.1.1 action drop $ tc -s filter show dev enp3s0np1 ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 192.168.1.1 in_hw in_hw_count 2 action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 10 sec used 10 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats immediate <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: sched: expose HW stats types per action used by driversJiri Pirko
It may be up to the driver (in case ANY HW stats is passed) to select which type of HW stats he is going to use. Add an infrastructure to expose this information to user. $ tc filter add dev enp3s0np1 ingress proto ip handle 1 pref 1 flower dst_ip 192.168.1.1 action drop $ tc -s filter show dev enp3s0np1 ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 192.168.1.1 in_hw in_hw_count 2 action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 10 sec used 10 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats immediate <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: introduce nla_put_bitfield32() helper and use itJiri Pirko
Introduce a helper to pass value and selector to. The helper packs them into struct and puts them into netlink message. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge tag 'i3c/for-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Boris Brezillon: - Fix driver auto-probing related issues - Stop using the deprecated i2c_new_device() function - Replace zero-length array with flexible-array member * tag 'i3c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: convert to use i2c_new_client_device() i3c: master: Replace zero-length array with flexible-array member i3c: Simplify i3c_device_match_id() i3c: Generate aliases for i3c modules i3c: Add a modalias sysfs attribute i3c: Fix MODALIAS uevents i3c: master: no need to iterate master device twice
2020-03-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2020-03-28 1) Use kmem_cache_zalloc() instead of kmem_cache_alloc() in xfrm_state_alloc(). From Huang Zijiang. 2) esp_output_fill_trailer() is the same in IPv4 and IPv6, so share this function to avoide code duplcation. From Raed Salem. 3) Add offload support for esp beet mode. From Xin Long. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge branch 'hns3-fixes'David S. Miller
Huazhong Tan says: ==================== net: hns3: fixes for -net This patchset includes some bugfixes for the HNS3 ethernet driver. [patch 1] removes flag WQ_MEM_RECLAIM flag when allocating WE, since it will cause a warning when the reset task flushes a IB's WQ. [patch 2] adds a new DESC_TYPE_FRAGLIST_SKB type to handle the linear data of the fraglist SKB, since it is different with the frag data. [patch 3] adds different handings for RSS configuration when load or reset. [patch 4] fixes a link ksetting issue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: hns3: fix set and get link ksettings issueGuangbin Huang
When device is not open, the service task which update the port information per second is not running. In this case, the port capabilities, including speed ability, autoneg ability, media type, may be incorrect. Then get/set link ksetting may fail. This patch fixes it by updating the port information before getting/ setting link ksettings when device is not open, and start timer task immediately by setting delay time to 0 when device opens. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: hns3: fix RSS config lost after VF reset.Guojia Liao
Currently, VF's RSS configuration would be set to default after VF reset, the the user's one will loss. To fix it, this patch separates hclgevf_rss_init_hw() into two parts, one sets up the default RSS configuration and just be called when driver loading, one configures the hardware and be called by driver loading or reset. Fixes: d97b30721301 ("net: hns3: Add RSS tuples support for VF") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: hns3: fix for fraglist SKB headlen not handling correctlyHuazhong Tan
When the fraglist SKB headlen is larger than zero, current code still handle the fraglist SKB linear data as frag data, which may cause TX error. This patch adds a new DESC_TYPE_FRAGLIST_SKB type to handle the mapping and unmapping of the fraglist SKB linear data buffer. Fixes: 8ae10cfb5089 ("net: hns3: support tx-scatter-gather-fraglist feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: hns3: drop the WQ_MEM_RECLAIM flag when allocating WQYunsheng Lin
The WQ in hns3 driver is allocated with WQ_MEM_RECLAIM flag in order to guarantee forward progress, which may cause hns3' WQ_MEM_RECLAIM WQ flushing infiniband' !WQ_MEM_RECLAIM WQ warning: [11246.200168] hns3 0000:bd:00.1: Reset done, hclge driver initialization finished. [11246.209979] hns3 0000:bd:00.1 eth7: net open [11246.227608] ------------[ cut here ]------------ [11246.237370] workqueue: WQ_MEM_RECLAIM hclge:hclge_service_task [hclge] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [11246.237391] WARNING: CPU: 50 PID: 2279 at ./kernel/workqueue.c:2605 check_flush_dependency+0xcc/0x140 [11246.260412] Modules linked in: hclgevf hns_roce_hw_v2 rdma_test(O) hns3 xt_CHECKSUM iptable_mangle xt_conntrack ipt_REJECT nf_reject_ipv4 ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bpfilter vfio_iommu_type1 vfio_pci vfio_virqfd vfio ib_isert iscsi_target_mod ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi aes_ce_blk crypto_simd cryptd aes_ce_cipher sunrpc nls_iso8859_1 crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce joydev input_leds hid_generic usbkbd usbmouse sbsa_gwdt usbhid usb_storage hid ses hclge hisi_zip hisi_hpre hisi_sec2 hnae3 hisi_qm ahci hisi_trng_v2 evbug uacce rng_core gpio_dwapb autofs4 hisi_sas_v3_hw megaraid_sas hisi_sas_main libsas scsi_transport_sas [last unloaded: hns_roce_hw_v2] [11246.325742] CPU: 50 PID: 2279 Comm: kworker/50:0 Kdump: loaded Tainted: G O 5.4.0-rc4+ #1 [11246.335181] Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B140.01 12/18/2019 [11246.344802] Workqueue: hclge hclge_service_task [hclge] [11246.350007] pstate: 60c00009 (nZCv daif +PAN +UAO) [11246.354779] pc : check_flush_dependency+0xcc/0x140 [11246.359549] lr : check_flush_dependency+0xcc/0x140 [11246.364317] sp : ffff800268a73990 [11246.367618] x29: ffff800268a73990 x28: 0000000000000001 [11246.372907] x27: ffffcbe4f5868000 x26: ffffcbe4f5541000 [11246.378196] x25: 00000000000000b8 x24: ffff002fdd0ff868 [11246.383483] x23: ffff002fdd0ff800 x22: ffff2027401ba600 [11246.388770] x21: 0000000000000000 x20: ffff002fdd0ff800 [11246.394059] x19: ffff202719293b00 x18: ffffcbe4f5541948 [11246.399347] x17: 000000006f8ad8dd x16: 0000000000000002 [11246.404634] x15: ffff8002e8a734f7 x14: 6c66207369205d65 [11246.409922] x13: 676c63685b206b73 x12: 61745f6563697672 [11246.415208] x11: 65735f65676c6368 x10: 3a65676c6368204d [11246.420494] x9 : 49414c4345525f4d x8 : 6e6162696e69666e [11246.425782] x7 : 69204d49414c4345 x6 : ffffcbe4f5765145 [11246.431068] x5 : 0000000000000000 x4 : 0000000000000000 [11246.436355] x3 : 0000000000000030 x2 : 00000000ffffffff [11246.441642] x1 : 3349eb1ac5310100 x0 : 0000000000000000 [11246.446928] Call trace: [11246.449363] check_flush_dependency+0xcc/0x140 [11246.453785] flush_workqueue+0x110/0x410 [11246.457691] ib_cache_cleanup_one+0x54/0x468 [11246.461943] __ib_unregister_device+0x70/0xa8 [11246.466279] ib_unregister_device+0x2c/0x40 [11246.470455] hns_roce_exit+0x34/0x198 [hns_roce_hw_v2] [11246.475571] __hns_roce_hw_v2_uninit_instance.isra.56+0x3c/0x58 [hns_roce_hw_v2] [11246.482934] hns_roce_hw_v2_reset_notify+0xd8/0x210 [hns_roce_hw_v2] [11246.489261] hclge_notify_roce_client+0x84/0xe0 [hclge] [11246.494464] hclge_reset_rebuild+0x60/0x730 [hclge] [11246.499320] hclge_reset_service_task+0x400/0x5a0 [hclge] [11246.504695] hclge_service_task+0x54/0x698 [hclge] [11246.509464] process_one_work+0x15c/0x458 [11246.513454] worker_thread+0x144/0x520 [11246.517186] kthread+0xfc/0x128 [11246.520314] ret_from_fork+0x10/0x18 [11246.523873] ---[ end trace eb980723699c2585 ]--- [11246.528710] hns3 0000:bd:00.2: Func clear success after reset. [11246.528747] hns3 0000:bd:00.0: Func clear success after reset. [11246.907710] hns3 0000:bd:00.1 eth7: link up According to [1] and [2]: There seems to be no specific guidance about how to handling the forward progress guarantee of network device's WQ yet, and other network device's WQ seem to be marked with WQ_MEM_RECLAIM without a clear reason. So this patch removes the WQ_MEM_RECLAIM flag when allocating WQ to aviod the above warning. 1. https://www.spinics.net/lists/netdev/msg631646.html 2. https://www.spinics.net/lists/netdev/msg632097.html Fixes: 0ea68902256e ("net: hns3: allocate WQ with WQ_MEM_RECLAIM flag") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge tag 'tpmdd-next-20200316' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm updates from Jarkko Sakkinen: "tpmdd updates for Linux v5.7" * tag 'tpmdd-next-20200316' of git://git.infradead.org/users/jjs/linux-tpmdd: KEYS: reaching the keys quotas correctly tpm: ibmvtpm: Add support for TPM2 tpm: ibmvtpm: Wait for buffer to be set before proceeding tpm: of: Handle IBM,vtpm20 case when getting log parameters MAINTAINERS: adjust to trusted keys subsystem creation tpm: tpm_tis_spi_cr50: use new structure for SPI transfer delays tpm_tis_spi: use new 'delay' structure for SPI transfer delays tpm: tpm2_bios_measurements_next should increase position index tpm: tpm1_bios_measurements_next should increase position index tpm: Don't make log failures fatal
2020-03-30net: dsa: Simplify 'dsa_tag_protocol_to_str()'Christophe JAILLET
There is no point in preparing the module name in a buffer. The format string can be passed diectly to 'request_module()'. This axes a few lines of code and cleans a few things: - max len for a driver name is MODULE_NAME_LEN wich is ~ 60 chars, not 128. It would be down-sized in 'request_module()' - we should pass the total size of the buffer to 'snprintf()', not the size minus 1 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: ena: Make some functions staticYueHaibing
Fix sparse warnings: drivers/net/ethernet/amazon/ena/ena_netdev.c:460:6: warning: symbol 'ena_xdp_exchange_program_rx_in_range' was not declared. Should it be static? drivers/net/ethernet/amazon/ena/ena_netdev.c:481:6: warning: symbol 'ena_xdp_exchange_program' was not declared. Should it be static? drivers/net/ethernet/amazon/ena/ena_netdev.c:1555:5: warning: symbol 'ena_xdp_handle_buff' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30dpaa_eth: Make dpaa_a050385_wa staticYueHaibing
Fix sparse warning: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2065:5: warning: symbol 'dpaa_a050385_wa' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30crypto/chtls: Fix chtls crash in connection cleanupRohit Maheshwari
There is a possibility that cdev is removed before CPL_ABORT_REQ_RSS is fully processed, so it's better to save it in skb. Added checks in handling the flow correctly, which suggests connection reset request is sent to HW, wait for HW to respond. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: fix fraglist segmentation reference count leakFlorian Westphal
Xin Long says: On udp rx path udp_rcv_segment() may do segment where the frag skbs will get the header copied from the head skb in skb_segment_list() by calling __copy_skb_header(), which could overwrite the frag skbs' extensions by __skb_ext_copy() and cause a leak. This issue was found after loading esp_offload where a sec path ext is set in the skb. Fix this by discarding head state of the fraglist skb before replacing its contents. Fixes: 3a1296a38d0cf62 ("net: Support GRO/GSO fraglist chaining.") Cc: Steffen Klassert <steffen.klassert@secunet.com> Reported-by: Xiumei Mu <xmu@redhat.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30crypto/chcr: fix incorrect ipv6 packet lengthRohit Maheshwari
IPv6 header's payload length field shouldn't include IPv6 header length. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: stmmac: Add support for VLAN Rx filteringWong Vee Khee
Add support for VLAN ID-based filtering by the MAC controller for MAC drivers that support it. Only the 12-bit VID field is used. Signed-off-by: Chuah Kim Tatt <kim.tatt.chuah@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30udp: initialize is_flist with 0 in udp_gro_receiveXin Long
Without NAPI_GRO_CB(skb)->is_flist initialized, when the dev doesn't support NETIF_F_GRO_FRAGLIST, is_flist can still be set and fraglist will be used in udp_gro_receive(). So fix it by initializing is_flist with 0 in udp_gro_receive. Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge branch 'crypto-chelsio-Fixes-issues-during-chcr-driver-registration'David S. Miller
Ayush Sawal says: ==================== crypto: chelsio: Fixes issues during chcr driver registration Patch 1: Avoid the accessing of wrong u_ctx pointer. Patch 2: Fixes a deadlock between rtnl_lock and uld_mutex. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Crypto: chelsio - Fixes a deadlock between rtnl_lock and uld_mutexAyush Sawal
The locks are taken in this order during driver registration (uld_mutex), at: cxgb4_register_uld.part.14+0x49/0xd60 [cxgb4] (rtnl_mutex), at: rtnetlink_rcv_msg+0x2db/0x400 (uld_mutex), at: cxgb_up+0x3a/0x7b0 [cxgb4] (rtnl_mutex), at: chcr_add_xfrmops+0x83/0xa0 [chcr](stucked here) To avoid this now the netdev features are updated after the cxgb4_register_uld function is completed. Fixes: 6dad4e8ab3ec6 ("chcr: Add support for Inline IPSec"). Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Crypto: chelsio - Fixes a hang issue during driver registrationAyush Sawal
This issue occurs only when multiadapters are present. Hang happens because assign_chcr_device returns u_ctx pointer of adapter which is not yet initialized as for this adapter cxgb_up is not been called yet. The last_dev pointer is used to determine u_ctx pointer and it is initialized two times in chcr_uld_add in chcr_dev_add respectively. The fix here is don't initialize the last_dev pointer during chcr_uld_add. Only assign to value to it when the adapter's initialization is completed i.e in chcr_dev_add. Fixes: fef4912b66d62 ("crypto: chelsio - Handle PCI shutdown event"). Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30selftests:mptcp: fix failure due to whitespace damageMatthieu Baerts
'pm_nl_ctl' was adding a trailing whitespace after having printed the IP. But at the end, the IP element is currently always the last one. The bash script launching 'pm_nl_ctl' had trailing whitespaces in the expected result on purpose. But these whitespaces have been removed when the patch has been applied upstream. To avoid trailing whitespaces in the bash code, 'pm_nl_ctl' and expected results have now been adapted. The MPTCP PM selftest can now pass again. Fixes: eedbc685321b (selftests: add PM netlink functional tests) Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: ethernet: ti: fix spelling mistake "rundom" -> "random"Colin Ian King
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge tag 'mlx5-updates-2020-03-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-03-29 1) mlx5 core level updates for mkey APIs + migrate some code to mlx5_ib 2) Use a separate work queue for fib event handling 3) Move new eswitch chains files to a new directory, to prepare for upcoming E-Switch and offloads features. 4) Support indr block setup (TC_SETUP_FT) in Flow Table mode. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30gfs2: Fix oversight in gfs2_ail1_flushBob Peterson
Ordinarily, function gfs2_ail1_start_one issues a write request for one item on the ail1 list, then returns -EBUSY. This makes the caller, gfs2_ail1_flush, loop around and start another. However, it was not clearing the -EBUSY return code each time through the loop. So on rare occasions, like when the wbc runs out of nr_to_write, it remained set to -EBUSY, which triggered an error and withdraw. This patch sets the return code to 0 each time through the restart loop so this won't happen anymore. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-03-30Merge branches 'acpi-ec', 'acpi-fan' and 'acpi-pci'Rafael J. Wysocki
* acpi-ec: ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add() ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init() ACPI: EC: Consolidate event handler installation code ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC ACPI: EC: Simplify acpi_ec_add() ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers() ACPI: EC: Avoid passing redundant argument to functions ACPI: EC: Avoid printing confusing messages in acpi_ec_setup() * acpi-fan: ACPI: fan: Use scnprintf() for avoiding potential buffer overflow * acpi-pci: ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
2020-03-30Merge branches 'acpi-button', 'acpi-battery', 'acpi-osl', 'acpi-video' and ↵Rafael J. Wysocki
'acpi-misc' * acpi-button: ACPI: Add new tiny-power-button driver to directly signal init ACPI: button: move HIDs to acpi/button.h * acpi-battery: ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry ACPI / AC: Cleanup DMI quirk table * acpi-osl: ACPI: OSL: Add missing __acquires/__releases annotations * acpi-video: ACPI: video: remove redundant assignments to variable result * acpi-misc: ACPI: list_for_each_safe() -> list_for_each_entry_safe()
2020-03-30Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20200214 ACPICA: Fix a couple of typos ACPICA: use acpi_size instead of u32 for prefix_path_length ACPICA: cast length arguement to acpi_ns_build_normalized_path() as u32 ACPICA: cast the result of the pointer difference to u32 ACPICA: Table Manager: Update comments in a function header ACPICA: Enable sleep button on ACPI legacy wake ACPICA: Fix a comment "enable" fixed events -> "disable" all fixed events. ACPICA: ASL-ASL+ converter: make root file a parameter for cv_init_file_tree ACPICA: ASL-ASL+ converter: remove function parameters from cv_init_file_tree()
2020-03-30ACPICA: Update version to 20200214Bob Moore
ACPICA commit ac0c1b8a43a317702bb11e11fd5067a1c59e3002 Version 20200214 Link: https://github.com/acpica/acpica/commit/ac0c1b8a Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30Merge branches 'pm-devfreq', 'powercap' and 'pm-docs'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: Get rid of some doc warnings PM / devfreq: Fix handling dev_pm_qos_remove_request result PM / devfreq: Fix a typo in a comment PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name PM / devfreq: Remove unneeded extern keyword PM / devfreq: Use constant name of userspace governor * powercap: powercap: idle_inject: Replace zero-length array with flexible-array member * pm-docs: docs: cpu-freq: convert cpufreq-stats.txt to ReST docs: cpu-freq: convert cpu-drivers.txt to ReST docs: cpu-freq: convert core.txt to ReST docs: cpu-freq: convert index.txt to ReST docs: cpufreq: fix a broken reference Documentation: cpufreq: Move legacy driver documentation
2020-03-30Merge branches 'pm-core', 'pm-sleep', 'pm-acpi' and 'pm-domains'Rafael J. Wysocki
* pm-core: PM: runtime: Add pm_runtime_get_if_active() * pm-sleep: PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there PM / hibernate: Remove unnecessary compat ioctl overrides PM: hibernate: fix docs for ioctls that return loff_t via pointer PM: sleep: wakeup: Use built-in RCU list checking PM: sleep: core: Use built-in RCU list checking * pm-acpi: ACPI: PM: s2idle: Refine active GPEs check ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late() * pm-domains: cpuidle: psci: Split psci_dt_cpu_init_idle() PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
2020-03-30Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: intel_pstate: Simplify intel_pstate_cpu_init() cpufreq: qcom: Add support for krait based socs cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling cpufreq: Use scnprintf() for avoiding potential buffer overflow Documentation: intel_pstate: update links for references cpufreq: intel_pstate: Consolidate policy verification cpufreq: dt: Allow platform specific intermediate callbacks cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location cpufreq: imx6q: read OCOTP through nvmem for imx6q cpufreq: imx6q: fix error handling cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check cpufreq: ti-cpufreq: Add support for OPP_PLUS cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
2020-03-30Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: haltpoll: allow force loading on hosts without the REALTIME hint intel_idle: Update copyright notice, known limitations and version intel_idle: Define CPUIDLE_FLAG_TLB_FLUSHED as BIT(16) intel_idle: Clean up kerneldoc comments for multiple functions intel_idle: Reorder declarations of static variables intel_idle: Annotate init time data structures intel_idle: Add __initdata annotations to init time variables intel_idle: Relocate definitions of cpuidle callbacks intel_idle: Clean up definitions of cpuidle callbacks intel_idle: Simplify LAPIC timer reliability checks
2020-03-30Merge branch 'pm-qos'Rafael J. Wysocki
* pm-qos: (30 commits) PM: QoS: annotate data races in pm_qos_*_value() Documentation: power: fix pm_qos_interface.rst format warning PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE Documentation: PM: QoS: Update to reflect previous code changes PM: QoS: Update file information comments PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions sound: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*() drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*() x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*() cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request() PM: QoS: Add CPU latency QoS API wrappers PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h PM: QoS: Simplify definitions of CPU latency QoS trace events ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 00:14:46 +0000