| Age | Commit message (Collapse) | Author |
|---|
|
This is a preparation patch. The next patch will check if an external TS
is active and return with an error. So we have to move the change of the
plat->flags that tracks if external timestamping is enabled after that
check.
Prepare for this change and move the plat->flags change into the mutex
and the if (on).
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
plat_stmmacenet_data::ext_snapshot_num
Do not store bitmask for enabling AUX_SNAPSHOT0. The previous commit
("net: stmmac: fix PPS capture input index") takes care of calculating
the proper bit mask from the request data's extts.index field, which is
0 if not explicitly specified otherwise.
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The stmmac supports up to 4 auxiliary snapshots that can be enabled by
setting the appropriate bits in the PTP_ACR bitfield.
Previously as of commit f4da56529da6 ("net: stmmac: Add support for
external trigger timestamping") instead of setting the bits, a fixed
value was written to this bitfield instead of passing the appropriate
bitmask.
Now the correct bit is set according to the ptp_clock_request.extts_index
passed as a parameter to stmmac_enable().
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Simplify the netdev_dbg() call in stmmac_enable() in order to reduce code
duplication. No functional change.
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The datatype of rx_coalesce_usecs is u32, always larger or equal to zero.
Previous checking does not include value 0, this patch removes the
checking to handle the value 0. This change in behaviour making the
value of 0 cause an error is not a problem because 0 is out of
range of rx_coalesce_usecs.
Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com>
Link: https://lore.kernel.org/r/20231018030802.741923-1-yi.fang.gan@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There seems to be no docs for the concept of multiple RSS
contexts and how to configure it. I had to explain it three
times recently, the last one being the charm, document it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231018010758.2382742-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Yoshihiro Shimoda says:
====================
rswitch: Add PM ops
This patch is based on the latest net-next.git / next branch.
After applied this patch with the following patches, the system can
enter/exit Suspend to Idle without any error:
https://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git/commit/?h=next&id=aa4c0bbf820ddb9dd8105a403aa12df57b9e5129
https://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git/commit/?h=next&id=1a5361189b7acac15b9b086b2300a11b7aa84c06
====================
Link: https://lore.kernel.org/r/20231017113402.849735-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add PM ops for Suspend to Idle. When the system suspended,
the Ethernet Serdes's clock will be stopped. So, this driver needs
to re-initialize the Ethernet Serdes by phy_init() in
renesas_eth_sw_resume(). Otherwise, timeout happened in phy_power_on().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Array index should not be negative, so modify the condition of
rswitch_for_each_enabled_port_continue_reverse() macro, and then
use unsigned int instead.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2023-10-17
This series contains cleanups for all the Intel drivers relating to their
use of format specifiers and the use of strncpy.
Jesse fixes various -Wformat warnings across all the Intel networking,
including various cases where a "%s" string format specifier is preferred,
and using kasprintf instead of snprintf.
Justin replaces all of the uses of the now deprecated strncpy with a more
modern string function, primarily strscpy.
====================
Link: https://lore.kernel.org/r/20231017190411.2199743-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect netdev->name to be NUL-terminated based on its use with format
strings:
| if (q_vector->rx.ring && q_vector->tx.ring)
| sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
Furthermore, we do not need NUL-padding as netdev is already
zero-allocated:
| netdev = alloc_etherdev_mq(sizeof(struct igc_adapter),
| IGC_MAX_TX_QUEUES);
...
alloc_etherdev() -> alloc_etherdev_mq() -> alloc_etherdev_mqs() ->
alloc_netdev_mqs() ...
| p = kvzalloc(alloc_size, GFP_KERNEL_ACCOUNT | __GFP_RETRY_MAYFAIL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-10-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect netdev->name to be NUL-terminated based on its usage with
`strlen` and format strings:
| if (strlen(netdev->name) < (IFNAMSIZ - 5)) {
| sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
Moreover, we do not need NUL-padding as netdev is already
zero-allocated:
| netdev = alloc_etherdev(sizeof(struct igbvf_adapter));
...
alloc_etherdev() -> alloc_etherdev_mq() -> alloc_etherdev_mqs() ->
alloc_netdev_mqs() ...
| p = kvzalloc(alloc_size, GFP_KERNEL_ACCOUNT | __GFP_RETRY_MAYFAIL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-9-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We see that netdev->name is expected to be NUL-terminated based on its
usage with format strings:
| sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
| q_vector->rx.ring->queue_index);
Furthermore, NUL-padding is not required as netdev is already
zero-allocated:
| netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
| IGB_MAX_TX_QUEUES);
...
alloc_etherdev_mq() -> alloc_etherdev_mqs() -> alloc_netdev_mqs() ...
| p = kvzalloc(alloc_size, GFP_KERNEL_ACCOUNT | __GFP_RETRY_MAYFAIL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-8-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
Moreover, `strncat` shouldn't really be used either as per
fortify-string.h:
* Do not use this function. While FORTIFY_SOURCE tries to avoid
* read and write overflows, this is only possible when the sizes
* of @p and @q are known to the compiler. Prefer building the
* string with formatting, via scnprintf() or similar.
Instead, use `scnprintf` with "%s%s" format string. This code is now
more readable and robust.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-7-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
Other implementations of .*get_drvinfo also use strscpy so this patch
brings fm10k_get_drvinfo in line as well:
igb/igb_ethtool.c +851
static void igb_get_drvinfo(struct net_device *netdev,
igbvf/ethtool.c
167:static void igbvf_get_drvinfo(struct net_device *netdev,
i40e/i40e_ethtool.c
1999:static void i40e_get_drvinfo(struct net_device *netdev,
e1000/e1000_ethtool.c
529:static void e1000_get_drvinfo(struct net_device *netdev,
ixgbevf/ethtool.c
211:static void ixgbevf_get_drvinfo(struct net_device *netdev,
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-6-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We can see that netdev->name is expected to be NUL-terminated based on
it's usage with format strings:
| pr_info("%s NIC Link is Down\n",
| netdev->name);
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
This is in line with other uses of strscpy on netdev->name:
$ rg "strscpy\(netdev\->name.*pci.*"
drivers/net/ethernet/intel/e1000e/netdev.c
7455: strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
10839: strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-5-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
The "...-1" pattern makes it evident that netdev->name is expected to be
NUL-terminated.
Meanwhile, it seems NUL-padding is not required due to alloc_etherdev
zero-allocating the buffer.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
This is in line with other uses of strscpy on netdev->name:
$ rg "strscpy\(netdev\->name.*pci.*"
drivers/net/ethernet/intel/e1000e/netdev.c
7455: strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
10839: strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-4-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Get ahead of the game and fix all the -Wformat=2 noted warnings in the
intel drivers directory.
There are one set of i40e and iavf warnings I couldn't figure out how to
fix because the driver is already using vsnprintf without an explicit
"const char *" format string.
Tested with both gcc-12 and clang-15. I found gcc-12 runs clean after
this series but clang-15 is a little worried about the vsnprintf lines.
summary of warnings:
drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c:148:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/iavf/iavf_ethtool.c:199:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:208:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: note: treat the string as an argument to avoid this
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix -Wformat-truncated warnings to complete the intel directories' W=1
clean efforts. The W=1 recently got enhanced with a few new flags and
this brought up some new warnings.
Switch to using kasprintf() when possible so we always allocate the
right length strings.
summary of warnings:
drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1425:60: warning: ‘%s’ directive output may be truncated writing 4 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1425:17: note: ‘snprintf’ output between 7 and 17 bytes into a destination of size 13
drivers/net/ethernet/intel/ice/ice_ptp.c:43:27: warning: ‘%s’ directive output may be truncated writing up to 479 bytes into a region of size 64 [-Wformat-truncation=]
drivers/net/ethernet/intel/ice/ice_ptp.c:42:17: note: ‘snprintf’ output between 1 and 480 bytes into a destination of size 64
drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning: ‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=]
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note: directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note: directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note: ‘snprintf’ output between 23 and 43 bytes into a destination of size 32
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pedro Tammela says:
====================
selftests: tc-testing: fixes for kselftest
While playing around with TuxSuite, we noticed a couple of things were
broken for strict CI/automated builds. We had a script that didn't make into
the kselftest tarball and a couple of missing Kconfig knobs in our
minimal config.
====================
Link: https://lore.kernel.org/r/20231017152309.3196320-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some taprio tests need auxiliary scripts to wait for workqueue events to
process. Move them to a dedicated folder in order to package them for
the kselftests tarball.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231017152309.3196320-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure CI builds using just tc-testing/config can run all tdc tests.
Some tests were broken because of missing knobs.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231017152309.3196320-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since PBA info can be read from lspci, delete txgbe_read_pba_string()
and the prints. In addition, delete the redundant MAC address printing.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231017100635.154967-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alexander Stein says:
====================
net: fec: Fix device_get_match_data usage
this is v2 adressing the regression introduced by commit b0377116decd
("net: ethernet: Use device_get_match_data()").
You could also remove the (!dev_info) case for Coldfire as this platform
has no quirks. But IMHO this should be kept as long as Coldfire platform
data is supported.
====================
Link: https://lore.kernel.org/r/20231017063419.925266-1-alexander.stein@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All i.MX platforms (non-Coldfire) use DT nowadays, so their platform ID
entries can be removed.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231017063419.925266-3-alexander.stein@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
device_get_match_data() expects that of_device_id->data points to actual
fec_devinfo data, not a platform_device_id entry.
Fix this by adjusting OF device data pointers to their corresponding
structs.
enum imx_fec_type is now unused and can be removed.
Fixes: b0377116decd ("net: ethernet: Use device_get_match_data()")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231017063419.925266-2-alexander.stein@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iosm_ipc_chnl_cfg.h: Fixed typo
iosm_ipc_imem_ops.h: Fixed typo
iosm_ipc_mux.h: Fixed typo
iosm_ipc_pm.h: Fixed typo
iosm_ipc_port.h: Fixed typo
iosm_ipc_trace.h: Fixed typo
Signed-off-by: Muhammad Muzammil <m.muzzammilashraf@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231014121407.10012-1-m.muzzammilashraf@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Assume that caller's 'to' offset really represents an upper boundary for
the pattern search, so patterns extending past this offset are to be
rejected.
The old behaviour also was kind of inconsistent when it comes to
fragmentation (or otherwise non-linear skbs): If the pattern started in
between 'to' and 'from' offsets but extended to the next fragment, it
was not found if 'to' offset was still within the current fragment.
Test the new behaviour in a kselftest using iptables' string match.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: f72b948dcbb8 ("[NET]: skb_find_text ignores to argument")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter next pull request 2023-10-18
This series contains initial netfilter skb drop_reason support, from
myself.
First few patches fix up a few spots to make sure we won't trip
when followup patches embed error numbers in the upper bits
(we already do this in some places).
Then, nftables and bridge netfilter get converted to call kfree_skb_reason
directly to let tooling pinpoint exact location of packet drops,
rather than the existing NF_DROP catchall in nf_hook_slow().
I would like to eventually convert all netfilter modules, but as some
callers cannot deal with NF_STOLEN (notably act_ct), more preparation
work is needed for this.
Last patch gets rid of an ugly 'de-const' cast in nftables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Paul Greenwalt says:
====================
ethtool: Add link mode maps for forced speeds
The following patch set was initially a part of [1]. As the purpose of the
original series was to add the support of the new hardware to the intel ice
driver, the refactoring of advertised link modes mapping was extracted to a
new set.
The patch set adds a common mechanism for mapping Ethtool forced speeds
with Ethtool supported link modes, which can be used in drivers code.
[1] https://lore.kernel.org/netdev/20230823180633.2450617-1-pawel.chmielewski@intel.com
Changelog:
v4->v5:
Separated ethtool and qede changes into two patches, fixed indentation,
and moved ethtool_forced_speed_maps_init() from ioctl.c to ethtool.h
v3->v4:
Moved the macro for setting fields into the common header file
v2->v3:
Fixed whitespaces, added missing line at end of file
v1->v2:
Fixed formatting, typo, moved declaration of iterator to loop line.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Refactor ice_get_link_ksettings to using forced speed to link modes
mapping.
Suggested-by : Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Refactor qede_forced_speed_maps_init() to use commen implementation
ethtool_forced_speed_maps_init().
The qede driver was compile tested only.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The need to map Ethtool forced speeds to Ethtool supported link modes is
common among drivers. To support this, add a common structure for forced
speed maps and a function to init them. This is solution was originally
introduced in commit 1d4e4ecccb11 ("qede: populate supported link modes
maps on module init") for qede driver.
ethtool_forced_speed_maps_init() should be called during driver init
with an array of struct ethtool_forced_speed_map to populate the mapping.
Definitions for maps themselves are left in the driver code, as the sets
of supported link modes may vary between the devices.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The set backend using this already has to work around this via ugly
cast, don't spread this pattern.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
errno is 0 because these hooks are called from prerouting and forward.
There is no socket that the errno would ever be propagated to.
Other netfilter modules (e.g. nf_nat, conntrack, ...) can be converted
in a similar way.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
net_dropmonitor blames core.c:nf_hook_slow.
Add NF_DROP_REASON() helper and use it in nft_do_chain().
The helper releases the skb, so exact drop location becomes
available. Calling code will observe the NF_STOLEN verdict
instead.
Adjust nf_hook_slow so we can embed an erro value wih
NF_STOLEN verdicts, just like we do for NF_DROP.
After this, drop in nftables can be pinpointed to a drop due
to a rule or the chain policy.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Same as previous change: we need to mask out the non-verdict bits, as
upcoming patches may embed an errno value in NF_STOLEN verdicts too.
NF_DROP could already do this, but not all called functions do this.
Checks that only test ret vs NF_ACCEPT are fine, the 'errno parts'
are always 0 for those.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This function calls helpers that can return nf-verdicts, but then
those get converted to -1/0 as thats what the caller expects.
Theoretically NF_DROP could have an errno number set in the upper 24
bits of the return value. Or any of those helpers could return
NF_STOLEN, which would result in use-after-free.
This is fine as-is, the called functions don't do this yet.
But its better to avoid possible future problems if the upcoming
patchset to add NF_DROP_REASON() support gains further users, so remove
the 0/-1 translation from the picture and pass the verdicts down to
the caller.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
nftables trace infra must mask out the non-verdict bit parts of the
return value, else followup changes that 'return errno << 8 | NF_STOLEN'
will cause breakage.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
These checks assume that the caller only returns NF_DROP without
any errno embedded in the upper bits.
This is fine right now, but followup patches will start to propagate
such errors to allow kfree_skb_drop_reason() in the called functions,
those would then indicate 'errno << 8 | NF_STOLEN'.
To not break things we have to mask those parts out.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Jiri Pirko says:
====================
devlink: fix a deadlock when taking devlink instance lock while holding RTNL lock
devlink_port_fill() may be called sometimes with RTNL lock held.
When putting the nested port function devlink instance attrs,
current code takes nested devlink instance lock. In that case lock
ordering is wrong.
Patch #1 is a dependency of patch #2.
Patch #2 converts the peernet2id_alloc() call to rely in RCU so it could
called without devlink instance lock.
Patch #3 takes device reference for devlink instance making sure that
device does not disappear before devlink_release() is called.
Patch #4 benefits from the preparations done in patches #2 and #3 and
removes the problematic nested devlink lock aquisition.
Patched #5-#7 improve documentation to reflect this issue so it is
avoided in the future.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a documentation for devlink_rel_nested_in_notify() describing the
devlink instance locking consequences.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a note describing the locking order of taking RTNL lock with devlink
instance lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a part talking about nested devlink instances describing
the helpers and locking ordering.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lockdep reports following issue:
WARNING: possible circular locking dependency detected
------------------------------------------------------
devlink/8191 is trying to acquire lock:
ffff88813f32c250 (&devlink->lock_key#14){+.+.}-{3:3}, at: devlink_rel_devlink_handle_put+0x11e/0x2d0
but task is already holding lock:
ffffffff8511eca8 (rtnl_mutex){+.+.}-{3:3}, at: unregister_netdev+0xe/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (rtnl_mutex){+.+.}-{3:3}:
lock_acquire+0x1c3/0x500
__mutex_lock+0x14c/0x1b20
register_netdevice_notifier_net+0x13/0x30
mlx5_lag_add_mdev+0x51c/0xa00 [mlx5_core]
mlx5_load+0x222/0xc70 [mlx5_core]
mlx5_init_one_devl_locked+0x4a0/0x1310 [mlx5_core]
mlx5_init_one+0x3b/0x60 [mlx5_core]
probe_one+0x786/0xd00 [mlx5_core]
local_pci_probe+0xd7/0x180
pci_device_probe+0x231/0x720
really_probe+0x1e4/0xb60
__driver_probe_device+0x261/0x470
driver_probe_device+0x49/0x130
__driver_attach+0x215/0x4c0
bus_for_each_dev+0xf0/0x170
bus_add_driver+0x21d/0x590
driver_register+0x133/0x460
vdpa_match_remove+0x89/0xc0 [vdpa]
do_one_initcall+0xc4/0x360
do_init_module+0x22d/0x760
load_module+0x51d7/0x6750
init_module_from_file+0xd2/0x130
idempotent_init_module+0x326/0x5a0
__x64_sys_finit_module+0xc1/0x130
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
-> #2 (mlx5_intf_mutex){+.+.}-{3:3}:
lock_acquire+0x1c3/0x500
__mutex_lock+0x14c/0x1b20
mlx5_register_device+0x3e/0xd0 [mlx5_core]
mlx5_init_one_devl_locked+0x8fa/0x1310 [mlx5_core]
mlx5_devlink_reload_up+0x147/0x170 [mlx5_core]
devlink_reload+0x203/0x380
devlink_nl_cmd_reload+0xb84/0x10e0
genl_family_rcv_msg_doit+0x1cc/0x2a0
genl_rcv_msg+0x3c9/0x670
netlink_rcv_skb+0x12c/0x360
genl_rcv+0x24/0x40
netlink_unicast+0x435/0x6f0
netlink_sendmsg+0x7a0/0xc70
sock_sendmsg+0xc5/0x190
__sys_sendto+0x1c8/0x290
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
-> #1 (&dev->lock_key#8){+.+.}-{3:3}:
lock_acquire+0x1c3/0x500
__mutex_lock+0x14c/0x1b20
mlx5_init_one_devl_locked+0x45/0x1310 [mlx5_core]
mlx5_devlink_reload_up+0x147/0x170 [mlx5_core]
devlink_reload+0x203/0x380
devlink_nl_cmd_reload+0xb84/0x10e0
genl_family_rcv_msg_doit+0x1cc/0x2a0
genl_rcv_msg+0x3c9/0x670
netlink_rcv_skb+0x12c/0x360
genl_rcv+0x24/0x40
netlink_unicast+0x435/0x6f0
netlink_sendmsg+0x7a0/0xc70
sock_sendmsg+0xc5/0x190
__sys_sendto+0x1c8/0x290
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
-> #0 (&devlink->lock_key#14){+.+.}-{3:3}:
check_prev_add+0x1af/0x2300
__lock_acquire+0x31d7/0x4eb0
lock_acquire+0x1c3/0x500
__mutex_lock+0x14c/0x1b20
devlink_rel_devlink_handle_put+0x11e/0x2d0
devlink_nl_port_fill+0xddf/0x1b00
devlink_port_notify+0xb5/0x220
__devlink_port_type_set+0x151/0x510
devlink_port_netdevice_event+0x17c/0x220
notifier_call_chain+0x97/0x240
unregister_netdevice_many_notify+0x876/0x1790
unregister_netdevice_queue+0x274/0x350
unregister_netdev+0x18/0x20
mlx5e_vport_rep_unload+0xc5/0x1c0 [mlx5_core]
__esw_offloads_unload_rep+0xd8/0x130 [mlx5_core]
mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core]
mlx5_esw_offloads_unload_rep+0x85/0xc0 [mlx5_core]
mlx5_eswitch_unload_sf_vport+0x41/0x90 [mlx5_core]
mlx5_devlink_sf_port_del+0x120/0x280 [mlx5_core]
genl_family_rcv_msg_doit+0x1cc/0x2a0
genl_rcv_msg+0x3c9/0x670
netlink_rcv_skb+0x12c/0x360
genl_rcv+0x24/0x40
netlink_unicast+0x435/0x6f0
netlink_sendmsg+0x7a0/0xc70
sock_sendmsg+0xc5/0x190
__sys_sendto+0x1c8/0x290
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
other info that might help us debug this:
Chain exists of:
&devlink->lock_key#14 --> mlx5_intf_mutex --> rtnl_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(rtnl_mutex);
lock(mlx5_intf_mutex);
lock(rtnl_mutex);
lock(&devlink->lock_key#14);
Problem is taking the devlink instance lock of nested instance when RTNL
is already held.
To fix this, don't take the devlink instance lock when putting nested
handle. Instead, rely on the preparations done by previous two patches
to be able to access device pointer and obtain netns id without devlink
instance lock held.
Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to allow to access device pointer without devlink
instance lock held, make sure the device pointer is usable until
devlink_release() is called.
Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
peernet2id_alloc() allows to be called lockless with peer net pointer
obtained in RCU critical section and makes sure to return ns ID if net
namespaces is not being removed concurrently. Benefit from
read_pnet_rcu() helper addition, use it to obtain net pointer under RCU
read lock and pass it to peernet2id_alloc() to get ns ID.
Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the net pointer stored in possible_net_t structure annotated as
an RCU pointer. Change the access helpers to treat it as such.
Introduce read_pnet_rcu() helper to allow caller to dereference
the net pointer under RCU read lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-10-10
1) Adham Faris, Increase max supported channels number to 256
2) Leon Romanovsky, Allow IPsec soft/hard limits in bytes
3) Shay Drory, Replace global mlx5_intf_lock with
HCA devcom component lock
4) Wei Zhang, Optimize SF creation flow
During SF creation, HCA state gets changed from INVALID to
IN_USE step by step. Accordingly, FW sends vhca event to
driver to inform about this state change asynchronously.
Each vhca event is critical because all related SW/FW
operations are triggered by it.
Currently there is only a single mlx5 general event handler
which not only handles vhca event but many other events.
This incurs huge bottleneck because all events are forced
to be handled in serial manner.
Moreover, all SFs share same table_lock which inevitably
impacts each other when they are created in parallel.
This series will solve this issue by:
1. A dedicated vhca event handler is introduced to eliminate
the mutual impact with other mlx5 events.
2. Max FW threads work queues are employed in the vhca event
handler to fully utilize FW capability.
3. Redesign SF active work logic to completely remove
table_lock.
With above optimization, SF creation time is reduced by 25%,
i.e. from 80s to 60s when creating 100 SFs.
Patches summary:
Patch 1 - implement dedicated vhca event handler with max FW
cmd threads of work queues.
Patch 2 - remove table_lock by redesigning SF active work
logic.
* tag 'mlx5-updates-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Allow IPsec soft/hard limits in bytes
net/mlx5e: Increase max supported channels number to 256
net/mlx5e: Preparations for supporting larger number of channels
net/mlx5e: Refactor mlx5e_rss_init() and mlx5e_rss_free() API's
net/mlx5e: Refactor mlx5e_rss_set_rxfh() and mlx5e_rss_get_rxfh()
net/mlx5e: Refactor rx_res_init() and rx_res_free() APIs
net/mlx5e: Use PTR_ERR_OR_ZERO() to simplify code
net/mlx5: Use PTR_ERR_OR_ZERO() to simplify code
net/mlx5: fix config name in Kconfig parameter documentation
net/mlx5: Remove unused declaration
net/mlx5: Replace global mlx5_intf_lock with HCA devcom component lock
net/mlx5: Refactor LAG peer device lookout bus logic to mlx5 devcom
net/mlx5: Avoid false positive lockdep warning by adding lock_class_key
net/mlx5: Redesign SF active work to remove table_lock
net/mlx5: Parallelize vhca event handling
====================
Link: https://lore.kernel.org/r/20231014171908.290428-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect both hi.data.modename and hi.data.drivername to be
NUL-terminated based on its usage with sprintf:
| sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s",
| bc->cfg.intclk ? "int" : "ext",
| bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
| bc->cfg.loopback ? ",loopback" : "");
Note that this data is copied out to userspace with:
| if (copy_to_user(data, &hi, sizeof(hi)))
... however, the data was also copied FROM the user here:
| if (copy_from_user(&hi, data, sizeof(hi)))
Considering the above, a suitable replacement is strscpy_pad() as it
guarantees NUL-termination on the destination buffer while also
NUL-padding (which is good+wanted behavior when copying data to
userspace).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231016-strncpy-drivers-net-hamradio-baycom_epp-c-v2-1-39f72a72de30@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
