| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.16-2021-10-08:
amdgpu:
- gart BO pin count fix
- RAS fixes
- Misc display fixes
- Misc code cleanups
- Validate IP discovery table
- IOMMU handling fixes for hotplug
- Cyan Skillfish display support
- DP 2.0 fixes
- Covert vega and navi to IP discovery based asic enumeration
- JPEG fixes
- More FP cleanup for display
- DCC fixes for DCN3.x
- Initial USB4 DP tunnelling support
- Aldebaran MCE support
amdkfd:
- Misc bug fixes
- Misc code cleanups
- RAS fixes
x86/MCE:
- Export symbol for use by GPU driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211008200345.4689-1-alexander.deucher@amd.com
|
|
Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses
nt35695 driver IC. For example this LCD module can be found in the
kwaek.ca Dragonboard Display Adapter Bundle.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211009203806.56821-3-dmitry.baryshkov@linaro.org
|
|
Add devicetree bindings for the Sharp LS060T1SX01 6.0" FullHD panel
using NT35695 driver. This panel can be found i.e. in the Dragonboard
Display Adapter bundle.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211009203806.56821-2-dmitry.baryshkov@linaro.org
|
|
Decoder input LVDS format is a property of the decoder chip or even
its strapping. Handle data-mapping the same way lvds-panel does. In
case data-mapping is not present, do nothing, since there are still
legacy bindings which do not specify this property.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211010144919.38392-2-marex@denx.de
|
|
Decoder input LVDS format is a property of the decoder chip or even
its strapping. Add DT property data-mapping the same way lvds-panel
does, to define the LVDS data mapping.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211010144919.38392-1-marex@denx.de
|
|
savagefb and some other drivers call kfree to free 'info->pixmap.addr'
even after calling unregister_framebuffer, which may cause double free.
Fix this by setting 'fb_info->pixmap.addr' to NULL after kfree in
unregister_framebuffer.
The following log reveals it:
[ 37.318872] BUG: KASAN: double-free or invalid-free in kfree+0x13e/0x290
[ 37.319369]
[ 37.320803] Call Trace:
[ 37.320992] dump_stack_lvl+0xa8/0xd1
[ 37.321274] print_address_description+0x87/0x3b0
[ 37.321632] ? kfree+0x13e/0x290
[ 37.321879] ? kfree+0x13e/0x290
[ 37.322126] ? kfree+0x13e/0x290
[ 37.322374] kasan_report_invalid_free+0x58/0x90
[ 37.322724] ____kasan_slab_free+0x123/0x140
[ 37.323049] __kasan_slab_free+0x11/0x20
[ 37.323347] slab_free_freelist_hook+0x81/0x150
[ 37.323689] ? savagefb_remove+0xa1/0xc0 [savagefb]
[ 37.324066] kfree+0x13e/0x290
[ 37.324304] savagefb_remove+0xa1/0xc0 [savagefb]
[ 37.324655] pci_device_remove+0xa9/0x250
[ 37.324959] ? pci_device_probe+0x7d0/0x7d0
[ 37.325273] device_release_driver_internal+0x4f7/0x7a0
[ 37.325666] driver_detach+0x1e8/0x2c0
[ 37.325952] bus_remove_driver+0x134/0x290
[ 37.326262] ? sysfs_remove_groups+0x97/0xb0
[ 37.326584] driver_unregister+0x77/0xa0
[ 37.326883] pci_unregister_driver+0x2c/0x1c0
[ 37.336124]
[ 37.336245] Allocated by task 5465:
[ 37.336507] ____kasan_kmalloc+0xb5/0xe0
[ 37.336801] __kasan_kmalloc+0x9/0x10
[ 37.337069] kmem_cache_alloc_trace+0x12b/0x220
[ 37.337405] register_framebuffer+0x3f3/0xa00
[ 37.337731] foo_register_framebuffer+0x3b/0x50 [savagefb]
[ 37.338136]
[ 37.338255] Freed by task 5475:
[ 37.338492] kasan_set_track+0x3d/0x70
[ 37.338774] kasan_set_free_info+0x23/0x40
[ 37.339081] ____kasan_slab_free+0x10b/0x140
[ 37.339399] __kasan_slab_free+0x11/0x20
[ 37.339694] slab_free_freelist_hook+0x81/0x150
[ 37.340034] kfree+0x13e/0x290
[ 37.340267] do_unregister_framebuffer+0x21c/0x3d0
[ 37.340624] unregister_framebuffer+0x23/0x40
[ 37.340950] savagefb_remove+0x45/0xc0 [savagefb]
[ 37.341302] pci_device_remove+0xa9/0x250
[ 37.341603] device_release_driver_internal+0x4f7/0x7a0
[ 37.341990] driver_detach+0x1e8/0x2c0
[ 37.342272] bus_remove_driver+0x134/0x290
[ 37.342577] driver_unregister+0x77/0xa0
[ 37.342873] pci_unregister_driver+0x2c/0x1c0
[ 37.343196] cleanup_module+0x15/0x1c [savagefb]
[ 37.343543] __se_sys_delete_module+0x398/0x490
[ 37.343881] __x64_sys_delete_module+0x56/0x60
[ 37.344221] do_syscall_64+0x4d/0xc0
[ 37.344492] entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1633848148-29747-1-git-send-email-zheyuma97@gmail.com
|
|
This reverts commit 230a6f0e6f49
("dt-bindings: add bindings for the Sharp LS060T1SX01 panel")
It was pushed to drm-misc-next by accident.
Added my own ack to expedit the revert.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-2-dmitry.baryshkov@linaro.org
|
|
This reverts commit
223cce88a926 ("drm/panel: Add support for Sharp LS060T1SX01 panel").
It was pushed to drm-misc-next by accident.
Added my own ack to expedit the revert.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-3-dmitry.baryshkov@linaro.org
|
|
Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses
nt35695 driver IC. For example this LCD module can be found in the
kwaek.ca Dragonboard Display Adapter Bundle.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-3-dmitry.baryshkov@linaro.org
|
|
Add devicetree bindings for the Sharp LS060T1SX01 6.0" FullHD panel
using NT35695 driver. This panel can be found i.e. in the Dragonboard
Display Adapter bundle.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-2-dmitry.baryshkov@linaro.org
|
|
Both hardware and driver can communicate DDC over i2c bus.
Fixes warnings as:
arch/arm/boot/dts/tegra20-paz00.dt.yaml: panel: 'ddc-i2c-bus' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /home/runner/work/linux/linux/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927214503.36012-1-david@ixit.cz
|
|
Add support for the Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT
Resistive Touch Module.
Signed-off-by: Søren Andersen <san@skov.dk>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930100501.15690-3-o.rempel@pengutronix.de
|
|
Add binding for the Innolux G070Y2-T02 panel. It is 7" WVGA (800x480)
TFT LCD panel with TTL interface and a backlight unit.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930100501.15690-1-o.rempel@pengutronix.de
|
|
This tablet display is unique and hence must be added to documentation.
Unfortunately, it's real make and number is not known due to obscure and
missing documentation and lack of writing on the display assembly
itself.
So the natural alternative that came to mind is to name the panel after
the device that contained it (an Android tablet). Hopefully that isn't
an issue.
I can confirm that the parameters that I've obtained are correct since
they came from a dump of the original Android OS.
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002202905.509437-2-pavlica.nikola@gmail.com
|
|
Add vendor prefix for the Vivax brand by M SAN Grupa d.o.o.
Source (in Croatian): https://www.vivax.com/hr/o-nama.aspx
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002202905.509437-1-pavlica.nikola@gmail.com
|
|
Generated by: scripts/checkincludes.pl
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove all but the first include of reg_helper.h and core_types.h
from dcn201_clk_mgr.c.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
adev_to_drm is used everywhere, so improve recent changes
when accessing drm_device pointer from amdgpu_device.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fix the deadlock with the BO reservations during SVM_BO evictions
while allocations in VRAM are concurrently performed. More specific,
while the ttm waits for the fence to be signaled (ttm_bo_wait), it
already has the BO reserved. In parallel, the restore worker might be
running, prefetching memory to VRAM. This also requires to reserve the
BO, but blocks the mmap semaphore first. The deadlock happens when the
SVM_BO eviction worker kicks in and waits for the mmap semaphore held
in restore worker. Preventing signal the fence back, causing the
deadlock until the ttm times out.
We don't need to hold the BO reservation anymore during validation
and mapping. Now the physical addresses are taken from hmm_range_fault.
We also take migrate_mutex to prevent range migration while
validate_and_map update GPU page table.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Got Werror when building with Clang-13:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:195:2:
error: variable 'ts' is used uninitialized whenever switch default is
taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:200:9:
note: uninitialized use occurs here
return ts;
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:180:2:
note: variable 'ts' is declared here
enum dpia_set_config_ts ts;
^
1 error generated.
Fix it.
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Missing 4.1.2.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The variable result is being initialized with a value that is never
read, it is being updated immediately afterwards in both branches
of an if statement. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Was missed when converting the driver over to IP based
initialization.
Tested-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dp-aux-bus.yaml says we can list an eDP panel as a child of
an eDP controller node to represent the fact that the panel
is connected to the controller's DP AUX bus.
Let's add it to the ps8640 bindings.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929173343.v2.2.I6050ba184b24d887e92692a72ee3054d643d6091@changeid
|
|
Add a function for checking source MST support. Drop intel_dp->can_mst
and use intel_dp->mst_mgr.cbs to indicate the same. It's the single
point of truth without additional state variables. In code, "source
support" is also self-documenting as opposed to the vague "can mst".
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006101618.22066-1-jani.nikula@intel.com
|
|
Limit the supported UHBR rates based on the repeater support, if there
are repeaters.
This should be done in DP helper level, but that requires an overhaul of
the LTTPR handling, as the max rate is not enough to represent how
128b/132b rates may be masked along the way.
Curiously, the spec says:
* Shall be cleared to 00h when operating in 8b/10b Link Layer.
* Each LTTPR on the way back to the DPTX shall clear the bits that do
not correspond to the LTTPR's current bit rate.
It's rather vague if we can reliably use the field at this time due to
the wording "operating" and "current". But it would seem bizarre to have
to wait until trying to operate a 128b/132b link layer at a certain bit
rate to figure this out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007105727.18439-1-jani.nikula@intel.com
|
|
Move detach implementation from sn65dsi83_remove() to dedicated
.detach callback. There is no functional change to the code, but
that detach is now in the correct location.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907024038.871299-1-marex@denx.de
|
|
R-Car DU improvements & enhancements to misc drivers
Most notably,
- Non-contiguous buffer import support for rcar-du
- r8a779a0 support preparation for rcar-du
- COMPILE_TEST fixes for omapdrm and sti
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YV5jfi+/qjTJKeb3@pendragon.ideasonboard.com
|
|
When trying to bring IS_ACTIVE to linux/kconfig.h I thought it wouldn't
provide much value just encapsulating it in a boolean context. So I also
added the support for handling undefined macros as the IS_ENABLED()
counterpart. However the feedback received from Masahiro Yamada was that
it is too ugly, not providing much value. And just wrapping in a boolean
context is too dumb - we could simply open code it.
As detailed in commit babaab2f4738 ("drm/i915: Encapsulate kconfig
constant values inside boolean predicates"), the IS_ACTIVE macro was
added to workaround a compilation warning. However after checking again
our current uses of IS_ACTIVE it turned out there is only
1 case in which it triggers a warning in clang (due
-Wconstant-logical-operand) and 2 in smatch. All the others
can simply use the shorter version, without wrapping it in any macro.
So here I'm dialing all the way back to simply removing the macro. That
single case hit by clang can be changed to make the constant come first,
so it doesn't think it's mask:
- if (context && CONFIG_DRM_I915_FENCE_TIMEOUT)
+ if (CONFIG_DRM_I915_FENCE_TIMEOUT && context)
As talked with Dan Carpenter, that logic will be added in smatch as
well, so it will also stop warning about it.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005171728.3147094-1-lucas.demarchi@intel.com
|
|
The UHBR check was using > instead of >=. Use the helper instead to
avoid mistakes. Also always use the non-UHBR values for HDMI.
v2: Use intel_crtc_has_dp_encoder() && intel_dp_is_uhbr() (Ville)
Fixes: 2817efaeb608 ("drm/i915/dg2: add SNPS PHY translations for UHBR link rates")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007124201.18686-1-jani.nikula@intel.com
|
|
Unify BO evicting functionality for possible memory
types in amdgpu_ttm.c.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Simplifying the code a bit.
v2: add missing rcu_read_lock()/unlock()
v3: switch to locked version
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-24-christian.koenig@amd.com
|
|
Simplifying the code a bit.
v2: add missing rcu_read_lock()/rcu_read_unlock()
v3: use dma_resv_for_each_fence instead
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-20-christian.koenig@amd.com
|
|
Simplifying the code a bit.
v2: use dma_resv_for_each_fence
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-17-christian.koenig@amd.com
|
|
This is probably a fix since we didn't even grabed a reference to the
fences.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-11-christian.koenig@amd.com
|
|
Simplify the code a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-10-christian.koenig@amd.com
|
|
Simplifying the code a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-9-christian.koenig@amd.com
|
|
A simpler version of the iterator to be used when the dma_resv object is
locked.
v2: fix index check here as well
v3: minor coding improvement, some documentation cleanup
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006123609.2026-1-christian.koenig@amd.com
|
|
The KMS documentation doesn't say much about the meaning of each
content type. Add a reference to the specification defining them.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004091236.82010-1-contact@emersion.fr
|
|
drivers/gpu/drm/drm_plane_helper.c: In function 'drm_primary_helper_update':
drivers/gpu/drm/drm_plane_helper.c:113:32: error: 'visible' is used uninitialized [-Werror=uninitialized]
113 | struct drm_plane_state plane_state = {
| ^~~~~~~~~~~
drivers/gpu/drm/drm_plane_helper.c:178:14: note: 'visible' was declared here
178 | bool visible;
| ^~~~~~~
cc1: all warnings being treated as errors
visible is an output, not an input. in practice this use might turn out
OK but it's still UB.
Fixes: df86af9133b4 ("drm/plane-helper: Add drm_plane_helper_check_state()")
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007063706.305984-1-alex_y_xu@yahoo.ca
|
|
As per the comment on top of acpi_evaluate_dsm():
| * Evaluate device's _DSM method with specified GUID, revision id and
| * function number. Caller needs to free the returned object.
We should free the returned object of acpi_evaluate_dsm() to avoid memory
leakage. Otherwise the kmemleak splat will be triggered at boot time (if we
compile kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE=y).
Fixes: 8e55f99c510f ("drm/i915: Invoke another _DSM to enable MUX on HP Workstation laptops")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906033541.862-1-yuzenghui@huawei.com
|
|
Extend the rcar_du_device_info structure and rcar_du_output enum to
support DSI outputs and utilise these additions to provide support for
the R8A779A0 V3U platform.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Not all platforms require both per-crtc IRQ and per-crtc clock
management. In preparation for suppporting such platforms, split the
feature macro to be able to specify both features independently.
The other features are incremented accordingly, to keep the two crtc
features adjacent.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The DIDSR fields named LDCS were incorrectly defined as LCDS.
Both the Gen2 and Gen3 documentation refer to the fields as the "LVDS
Dot Clock Select".
Correct the definitions.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The R-Car DU as found on the D3, E3, and V3U do not have support
for an external synchronisation method.
In these cases, the dsysr cached register should not be initialised
in DSYSR_TVM_TVSYNC, but instead should be left clear to configure as
DSYSR_TVM_MASTER by default.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Sort the DU outputs alphabetically, with the exception of the final
entry which is there as a sentinal.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Extend the Renesas DU display bindings to support the r8a779a0 V3U.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The correct format specifier for size_t is %zu. Using %d (or %u)
generates a warning on 64-bit platforms. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
|
