summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-25docs: kernel-parameter: Improve the description of nr_cpus and maxcpusBaoquan He
From the old description people still can't get what's the exact difference between nr_cpus and maxcpus. Especially in kdump kernel nr_cpus is always suggested if it's implemented in the ARCH. The reason is nr_cpus is used to limit the max number of possible cpu in system, the sum of already plugged cpus and hot plug cpus can't exceed its value. However maxcpus is used to limit how many cpus are allowed to be brought up during bootup. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-24docs-rst: kernel-doc: better output struct membersMauro Carvalho Chehab
Right now, for a struct, kernel-doc produces the following output: .. c:type:: struct v4l2_prio_state stores the priority states **Definition** :: struct v4l2_prio_state { atomic_t prios[4]; }; **Members** ``atomic_t prios[4]`` array with elements to store the array priorities Putting a member name in verbatim and adding a continuation line causes the LaTeX output to generate something like: item[atomic_t prios\[4\]] array with elements to store the array priorities Everything inside "item" is non-breakable, with may produce lines bigger than the column width. Also, for function members, like: int (* rx_read) (struct v4l2_subdev *sd, u8 *buf, size_t count,ssize_t *num); It puts the name of the member at the end, like: int (*) (struct v4l2_subdev *sd, u8 *buf, size_t count,ssize_t *num) read With is very confusing. The best is to highlight what really matters: the member name. is a secondary information. So, change kernel-doc, for it to produce the output on a different way: **Members** ``prios[4]`` array with elements to store the array priorities Also, as the type is not part of LaTeX "item[]", LaTeX will split it into multiple lines, if needed. So, both LaTeX/PDF and HTML outputs will look good. It should be noticed, however, that the way Sphinx LaTeX output handles things like: Foo bar is different than the HTML output. On HTML, it will produce something like: **Foo** bar While, on LaTeX, it puts both foo and bar at the same line, like: **Foo** bar Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-22docs-rst: add package adjustboxMauro Carvalho Chehab
We need adjustbox to allow adjusting the size of tables that are bigger than the line width. There are quite a few of them at the media books. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-22docs-rst: Fix an warning when in interactive modeMauro Carvalho Chehab
When XeLaTeX is in interactive mode, it complains that py@noticelength already exists. Rename it and declare it only once to avoid such messages. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-22docs-rst: Use better colors for note/warning/attention boxesMauro Carvalho Chehab
Instead of painting the box with gray, let's use a colored box. IMHO, that makes easier to warn users about some issue pointed by the Sphinx. It also matches to what we do already with the HTML output. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-22docs-rst: conf.py: adjust the size of .. note:: tagMauro Carvalho Chehab
While the current implementation works well when using as a paragraph, it doesn't work properly if inside a table. As we have quite a few such cases, fix the logic to take the column size into account. PS.: I took the logic there from the latest version of Sphinx.sty Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-22docs-rst: add support for LaTeX outputMauro Carvalho Chehab
Sphinx supports LaTeX output. Sometimes, it is interesting to call it directly, instead of also generating a PDF. As it comes for free, add a target for it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-22doc-rst: migrate ioctl CEC_DQEVENT to c-domainMarkus Heiser
This is only one example, demonstrating the benefits of the patch series. The CEC_DQEVENT ioctl is migrated to the sphinx c-domain and referred by ":name: CEC_DQEVENT". With this change the indirection using ":ref:`CEC_DQEVENT` is no longer needed, we can refer the ioctl directly with ":c:func:`CEC_DQEVENT`". As addition in the index, there is a entry "CEC_DQEVENT (C function)". Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-22doc-rst: Revert "kernel-doc: fix handling of address_space tags"Markus Heiser
This reverts commit a88b1672d4ddf9895eb53e6980926d5e960dea8e. From the origin comit log:: The RST cpp:function handler is very pedantic: it doesn't allow any macros like __user on it Since the kernel-doc parser does NOT make use of the cpp:domain, there is no need to change the kernel-doc parser eleminating the address_space tags. Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-22doc-rst: moved *duplicate* warnings to nitpicky modeMarkus Heiser
Moved the *duplicate C object description* warnings for function declarations in the nitpicky mode. In nitpick mode, you can suppress those warnings (e.g. ioctl) with:: nitpicky = True nitpick_ignore = [ ("c:func", "ioctl"), ] See Sphinx documentation for the config values for ``nitpick`` and ``nitpick_ignore`` [1]. With this change all the ".. cpp:function:: int ioctl(..)" descriptions (found in the media book) can be migrated to ".. c:function:: int ioctl(..)", without getting any warnings. E.g.:: .. cpp:function:: int ioctl( int fd, int request, struct cec_event *argp ) .. c:function:: int ioctl( int fd, int request, struct cec_event *argp ) The main effect, is that we get those *CPP-types* back into Sphinx's C- namespace and we need no longer to distinguish between c/cpp references, when we refer a function like the ioctl. [1] http://www.sphinx-doc.org/en/stable/config.html?highlight=nitpick#confval-nitpicky Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-22doc-rst:c-domain: ref-name of a function declarationMarkus Heiser
Add option 'name' to the "c:function:" directive. With option 'name' the ref-name of a function can be modified. E.g.:: .. c:function:: int ioctl( int fd, int request ) :name: VIDIOC_LOG_STATUS The func-name (e.g. ioctl) remains in the output but the ref-name changed from ``ioctl`` to ``VIDIOC_LOG_STATUS``. The index entry for this function is also changed to ``VIDIOC_LOG_STATUS`` and the function can now referenced by:: :c:func:`VIDIOC_LOG_STATUS` Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-22doc-rst: add boilerplate to customize c-domainMarkus Heiser
Add a sphinx-extension to customize the sphinx c-domain. No functional changes right yet, just the boilerplate code. Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> [ jc: coding-style tweak ] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-19Merge branch 'dev-tools' into doc/4.9Jonathan Corbet
Coalesce development-tool documents into a single directory and sphinxify them.
2016-08-18docs: Sphinxify gdb-kernel-debugging.txt and move to dev-toolsJonathan Corbet
Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs: sphinxify kmemcheck.txt and move to dev-toolsJonathan Corbet
Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs: sphinxify kmemleak.txt and move it to dev-toolsJonathan Corbet
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs: sphinxify ubsan.txt and move it to dev-toolsJonathan Corbet
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs: sphinxify kasan.txt and move to dev-toolsJonathan Corbet
No textual changes beyond formatting. Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs: sphinixfy gcov.txt and move to dev-toolsJonathan Corbet
No textual changes beyond formatting. Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs: sphinxify kcov.txt and move to dev-toolsJonathan Corbet
Another document added to the dev-tools collection. Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs: sphinxify sparse.txt and move to dev-toolsJonathan Corbet
Fold the sparse document into the development tools set; no changes to the text itself beyond formatting. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs: sphinxify coccinelle.txt and add it to dev-toolsJonathan Corbet
No textual changes have been made, but the formatting has obviously been tweaked. Cc: Michal Marek <mmarek@suse.com> Cc: Gilles Muller <Gilles.Muller@lip6.fr> Acked-by: Nicolas Palix <nicolas.palix@imag.fr> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs: create a new dev-tools directoryJonathan Corbet
This directory will be a collecting point for documentation oriented around development tools. As a step toward ordering Documentation/ it's a small one, but we have to start somewhere... Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18Merge branch 'xelatex' into doc/4.9Jonathan Corbet
Mauro says: This patch series fix Sphinx to allow it to build the media documentation as a PDF file. The first patch is actually a bug fix: one of the previous patch broke compilation for PDF as a hole, as it added an extra parenthesis to a function call. The second patch just removes a left over code for rst2pdf. The other patches change from "pdflatex" to "xelatex" and address several issues that prevent building the media books. I think this patch series belong to docs-next. Feel free to merge them there, if you agree. There's one extra patch that touches Documentation/conf.py, re-adding the media book to the PDF build, but IMHO this one would be better to be merged via the media tree, after the fixes inside the media documentation to fix the build.
2016-08-18docs-rst: enable the Sphinx math extensionMauro Carvalho Chehab
This extension will be used by the media books. The name of the math image extension changed on Sphinx 1.4.x, according with: http://www.sphinx-doc.org/en/stable/ext/math.html#module-sphinx.ext.imgmath Let's autodetect, to keep building with versions < 1.4. Suggested-by: Markus Heiser <markus.heiser@darmarit.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs-rst: Don't go to interactive mode on errorsMauro Carvalho Chehab
When building for LaTeX, it stops and enters into interactive mode on errors. Don't do that, as there are some non-fatal errors on media books when using Sphinx 1.4.x that we don't know how fix yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs-rst: parse-heraders.pl: escape LaTeX charactersMauro Carvalho Chehab
Let's escape the LaTeX characters, to avoid troubles when outputing them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs-rst: better adjust margins and font sizeMauro Carvalho Chehab
As we have big tables, reduce the left/right margins and decrease the point size to 8pt. Visually, it is still good enough, and now less tables are too big to be displayed. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs-rst: Don't mangle with UTF-8 chars on LaTeX/PDF outputMauro Carvalho Chehab
pdflatex doesn't accept using some UTF-8 chars, like "equal or less than" or "equal or greater than" chars. However, the media documents use them. So, we need to use XeLaTeX for conversion, and a font that accepts such characters. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs-rst: improve output for .. notes:: on LaTeXMauro Carvalho Chehab
The output for those notes are bad in pdf, as they're not in a box with a different color. Also, it causes the output to not build if the note is inside a table. Change its implementation to avoid the above troubles. The logic there came from: https://stackoverflow.com/questions/606746/how-to-customize-an-existing-latex-environment-without-interfering-with-other-en Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs-rst: allow generating some LaTeX pages in landscapeMauro Carvalho Chehab
Portrait is too small for some tables used at the media docs. So, allow documents to tell Sphinx to generate some pages in landscape by using: .. raw:: latex \begin{landscape} <some stuff> .. raw:: latex \end{landscape} Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs-rst: remove a rst2pdf left over codeMauro Carvalho Chehab
The usage of rst2pdf was replaced by pdflatex on a previous patch. Remove the left-over code at conf.py. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18docs-rst: fix a breakage when building PDF documentsMauro Carvalho Chehab
changeset 606b9ac81a63 ("doc-rst: generic way to build only sphinx sub-folders") accidentally broke PDF generation by adding an extra ")". Remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18mm, kasan: Update kasan docs to indicate arm64 supportLaura Abbott
KASAN has been supported on arm64 since 39d114ddc682 ("arm64: add KASAN support"). Update the docs to indicate this. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18doc-rst: add index to sub-foldersMarkus Heiser
Add a index if only a sub-folder is build e.g.:: make SPHINXDIRS=media cleandocs htmldocs BTW: removed dead search link in the top-index file Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18kconfig-language: improve menuconfig usage descriptionEugeniu Rosca
Improper menuconfig usage leads to empty menu entries. zconfdump() is able to reveal some real-life examples: - menuconfig VFIO_NOIOMMU - menuconfig RESET_CONTROLLER - menuconfig SND_ARM To avoid future occurrences of those, improve the menuconfig syntax description. Signed-off-by: Eugeniu Rosca <rosca.eugeniu@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18Update the maximum depth of C-state from 6 to 9baolex.ni
Hi Jon, This patch is an old one, we have corrected some minor issues on the newer one. Please only review the newest version from my last mail with this subject "[PATCH] ACPI: Update the maximum depth of C-state from 6 to 9". And I also attached it to this mail. Thanks, Baole On 7/11/2016 6:37 AM, Jonathan Corbet wrote: > On Mon, 4 Jul 2016 09:55:10 +0800 > "baolex.ni" <baolex.ni@intel.com> wrote: > >> Currently, CPUIDLE_STATE_MAX has been defined as 10 in the cpuidle head file, >> and max_cstate = CPUIDLE_STATE_MAX – 1, so 9 is the right maximum depth of C-state. >> This change is reflected in one place of the kernel-param file, >> but not in the other place where I suggest changing. >> >> Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> >> Signed-off-by: Baole Ni <baolex.ni@intel.com> > > So why are there two signoffs on a single-line patch? Which one of you > is the actual author? > > Thanks, > > jon > From cf5f8aa6885874f6490b11507d3c0c86fa0a11f4 Mon Sep 17 00:00:00 2001 From: Chuansheng Liu <chuansheng.liu@intel.com> Date: Mon, 4 Jul 2016 08:52:51 +0800 Subject: [PATCH] Update the maximum depth of C-state from 6 to 9 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, CPUIDLE_STATE_MAX has been defined as 10 in the cpuidle head file, and max_cstate = CPUIDLE_STATE_MAX – 1, so 9 is the right maximum depth of C-state. This change is reflected in one place of the kernel-param file, but not in the other place where I suggest changing. Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by: Baole Ni <baolex.ni@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18Documentation: sunxi: Update Allwinner SoC documentationIcenowy Zheng
Now, the A83T and A64 SoC user manuals are available. Update the documentation to add the links. An updated version of A83T datasheet is also included now. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18Documentation: rs485: Do not define manually the ioctlRicardo Ribalda Delgado
It is not a very good practice to define the IOCTL manually instead of using the header file. Fix it on the documentation example. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-15Documentation: kprobes: Document jprobes stack copying limitationsDavid A. Long
Some architectures (i.e.: sparc64 and arm64) make reasonable partial stack duplication for jprobes problematic. Document this. Signed-off-by: David A. Long <dave.long@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-14CodingStyle: Remove "Don't use C99-style comments"Joe Perches
Because Linus may still be reading source code on greenbar paper instead of color terminals with code syntax highlighting and appropriate font decorations. Link: http://lkml.kernel.org/r/CA+55aFyQYJerovMsSoSKS7PessZBr4vNp-3QUUwhqk4A4_jcbg@mail.gmail.com Signed-off-by: Joe Perches <joe@perches.com>
2016-08-14CodingStyle: Clarify and complete chapter 7Jean Delvare
Chapter 7 (Centralized exiting of functions) of the coding style documentation is unclear at times, and lacks some information (such as the possibility to indent labels with a single space.) Clarify and complete it. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-14README: Delete obsolete i386 info + update arch/i386/ pathsØyvind A. Holm
Support for i386 was removed in v3.8, delete the paragraph that says processor types above 386 won't work on that architecture. It's obsolete information and potentially confusing. Also change a couple of "arch/i386/" paths to one that exists now, using "arch/x86/" instead. Signed-off-by: Øyvind A. Holm <sunny@sunbase.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-14Documentation: clk: update file names containing referenced structuresAndi Shyti
Commit 'b09d6d991' removes include/linux/clk-private.h and re-arranges the clock related structures contained in it in different files. The documentation has not been updated accordingly, thus it wasn't anymore consistent. Place the structures referenced by Documentation/clk.txt in the correct files and update their contents to the latest status. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> [geert: Fix path to clk.c, whitespace, more clk_core, ...] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-14doc-rst: add docutils config fileMarkus Heiser
To stop the sphinx-build on severe errors and exit with an exit code (to stop make) the halt_level must be set. The halt_level can't be set from sphinx, it is a docutils configuration [1]. For this a docutils.conf was added. [1] http://docutils.sourceforge.net/docs/user/config.html Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-14doc-rst: add stand-alone conf.py to gpu folderMarkus Heiser
With the gpu/conf.py, the gpu folder can be build and distributed stand-alone. To compile only the html of 'gpu' folder use:: make SPHINXDIRS="gpu" htmldocs Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-14doc-rst: add media/conf_nitpick.pyMarkus Heiser
The media/conf_nitpick.py is a *build-theme* wich uses the nit-picking mode of sphinx. To compile only the html of 'media' with the nit-picking build use:: make SPHINXDIRS=media SPHINX_CONF=conf_nitpick.py htmldocs With this, the Documentation/conf.py is read first and updated with the configuration values from the Documentation/media/conf_nitpick.py. The origin media/conf_nitpick.py comes from Mauro's experimental docs-next branch:: https://git.linuxtv.org/mchehab/experimental.git mchehab/docs-next BTW fixed python indentation in media/conf_nitpick.py. Python indentation is 4 spaces [1] and Python 3 disallows mixing the use of tabs and spaces for indentation [2]. [1] https://www.python.org/dev/peps/pep-0008/#indentation [2] https://www.python.org/dev/peps/pep-0008/#tabs-or-spaces Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-14doc-rst: add stand-alone conf.py to media folderMarkus Heiser
With the media/conf.py, and media/index.rst the media folder can be build and distributed stand-alone. Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-14doc-rst: generic way to build only sphinx sub-foldersMarkus Heiser
Add a generic way to build only a reST sub-folder with or without a individual *build-theme*. * control *sub-folders* by environment SPHINXDIRS * control *build-theme* by environment SPHINX_CONF Folders with a conf.py file, matching $(srctree)/Documentation/*/conf.py can be build and distributed *stand-alone*. E.g. to compile only the html of 'media' and 'gpu' folder use:: make SPHINXDIRS="media gpu" htmldocs To use an additional sphinx-build configuration (*build-theme*) set the name of the configuration file to SPHINX_CONF. E.g. to compile only the html of 'media' with the *nit-picking* build use:: make SPHINXDIRS=media SPHINX_CONF=conf_nitpick.py htmldocs With this, the Documentation/conf.py is read first and updated with the configuration values from the Documentation/media/conf_nitpick.py. Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-12Documentation: exclude media documentation from pdf generationJani Nikula
Although pdflatex is more robust than rst2pdf, building media documentation pdf still fails. Exclude media documentation from pdf generation for now. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Markus Heiser <markus.heiser@darmarit.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 09:06:05 +0000