summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-10dt-bindings: iio: add missing reset-gpios constrainKrzysztof Kozlowski
The Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml schema does not enforce number of reset GPIOs, thus each device binding must do it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231005083650.92222-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-06Merge tag 'iio-fixes-for-6.6a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: 1st set of IIO fixes for 6.6 Note last minute rebase to fix up a stale Fixes tag. All patches have been in Linux-next for some time. adi,ad3552r - Fix swapped device IDs for the two parts that are supported. adi,ad7192 - Use the right reference voltage source. adi,ad7292 - Fix additionalProperties to be false, not true. adi,ad74413 - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER adi,admv1013 - Fix up some corner cases for the mixer vgate register value. bosch,bmp280 - Fix a null pointer dereference caused by a wrong boolean operator. bosch,bno055 - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER freescale,imx8eqxp - Fix some wrong register addresses. google,cros_ec - Fix a use after free if very badly timed buffer disable occurs by holding the device in buffered mode. infineon,dps310 - Expand a timeout so we don't hit it on working parts. meas,m5611 - Allow for a ROM CRC of 0 as it is a valid value and there are devices out there where it happens. murata,irsd200 - Make sure the buffer used to build up the scan is large enough to take the timestamp. rohm,bu27010 binding - Add a missing required vdd-supply vishay,vcnl4000 - Don't power down chip in wrong place. * tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: pressure: ms5611: ms5611_prom_is_valid false negative bug dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes iio: adc: ad7192: Correct reference voltage iio: light: vcnl4000: Don't power on/off chip in config iio: addac: Kconfig: update ad74413r selections iio: pressure: dps310: Adjust Timeout Settings iio: imu: bno055: Fix missing Kconfig dependencies iio: adc: imx8qxp: Fix address for command buffer registers iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data() iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example iio: admv1013: add mixer_vgate corner cases iio: pressure: bmp280: Fix NULL pointer exception iio: dac: ad3552r: Correct device IDs
2023-10-05iio: pressure: ms5611: ms5611_prom_is_valid false negative bugAlexander Zangerl
The ms5611 driver falsely rejects lots of MS5607-02BA03-50 chips with "PROM integrity check failed" because it doesn't accept a prom crc value of zero as legitimate. According to the datasheet for this chip (and the manufacturer's application note about the PROM CRC), none of the possible values for the CRC are excluded - but the current code in ms5611_prom_is_valid() ends with return crc_orig != 0x0000 && crc == crc_orig Discussed with the driver author (Tomasz Duszynski) and he indicated that at that time (2015) he was dealing with some faulty chip samples which returned blank data under some circumstances and/or followed example code which indicated CRC zero being bad. As far as I can tell this exception should not be applied anymore; We've got a few hundred custom boards here with this chip where large numbers of the prom have a legitimate CRC value 0, and do work fine, but which the current driver code wrongly rejects. Signed-off-by: Alexander Zangerl <az@breathe-safe.com> Fixes: c0644160a8b5 ("iio: pressure: add support for MS5611 pressure and temperature sensor") Link: https://lore.kernel.org/r/2535-1695168070.831792@Ze3y.dhYT.s3fx Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodesRob Herring
"additionalProperties: true" is only for incomplete schemas such as bus child nodes in a bus's schema. That doesn't apply to the "channel" nodes in the adi,ad7292 binding, so fix additionalProperties to be false. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20230926164357.100325-1-robh@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: ad7192: Correct reference voltageAlisa-Dariana Roman
The avdd and the reference voltage are two different sources but the reference voltage was assigned according to the avdd supply. Add vref regulator structure and set the reference voltage according to the vref supply from the devicetree. In case vref supply is missing, reference voltage is set according to the avdd supply for compatibility with old devicetrees. Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230924152149.41884-1-alisadariana@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: light: vcnl4000: Don't power on/off chip in configMårten Lindahl
After enabling/disabling interrupts on the vcnl4040 chip the als and/or ps sensor is powered on or off depending on the interrupt enable bits. This is made as a last step in write_event_config. But there is no reason to do this as the runtime PM handles the power state of the sensors. Interfering with this may impact sensor readings. Consider the following: 1. Userspace makes sensor data reading which triggers RPM resume (sensor powered on) and a RPM suspend timeout. The timeout is 2000ms before RPM suspend powers the sensor off if no new reading is made within the timeout period. 2. Userspace disables interrupts => powers sensor off 3. Userspace reads sensor data = 0 because sensor is off and the suspend timeout has not passed. For each new reading made within the timeout period the timeout is renewed with 2000ms and RPM will not make a new resume (device was not suspended). So the sensor will not be powered on. 4. No further userspace reading for 2000ms ends RPM suspend timeout and triggers suspend (powers off already powered off sensor). Powering sensor off in (2) makes all consecutive readings made within 2000ms to the previous reading (3) return invalid data. Skip setting power state when writing new event config. Fixes: 546676121cb9 ("iio: light: vcnl4000: Add interrupt support for vcnl4040") Fixes: bc292aaf9cb4 ("iio: light: vcnl4000: add illuminance irq vcnl4040/4200") Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20230907-vcnl4000-pm-fix-v2-1-298e01f54db4@axis.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: addac: Kconfig: update ad74413r selectionsAntoniu Miclaus
Building ad74413r without selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER generates error with respect to the iio trigger functions that are used within the driver. Update the Kconfig accordingly. Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20230912085421.51102-1-antoniu.miclaus@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: pressure: dps310: Adjust Timeout SettingsLakshmi Yadlapati
The DPS310 sensor chip has been encountering intermittent errors while reading the sensor device across various system designs. This issue causes the chip to become "stuck," preventing the indication of "ready" status for pressure and temperature measurements in the MEAS_CFG register. To address this issue, this commit fixes the timeout settings to improve sensor stability: - After sending a reset command to the chip, the timeout has been extended from 2.5 ms to 15 ms, aligning with the DPS310 specification. - The read timeout value of the MEAS_CFG register has been adjusted from 20ms to 30ms to match the specification. Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Fixes: 7b4ab4abcea4 ("iio: pressure: dps310: Reset chip after timeout") Link: https://lore.kernel.org/r/20230829180222.3431926-2-lakshmiy@us.ibm.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: imu: bno055: Fix missing Kconfig dependenciesJonathan Cameron
This driver uses IIO triggered buffers so it needs to select them in Kconfig. on riscv-32bit: /opt/crosstool/gcc-13.2.0-nolibc/riscv32-linux/bin/riscv32-linux-ld: drivers/iio/imu/bno055/bno055.o: in function `.L367': bno055.c:(.text+0x2c96): undefined reference to `devm_iio_triggered_buffer_setup_ext' Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-next/40566b4b-3950-81fe-ff14-871d8c447627@infradead.org/ Fixes: 4aefe1c2bd0c ("iio: imu: add Bosch Sensortec BNO055 core driver") Cc: Andrea Merello <andrea.merello@iit.it> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230903113052.846298-1-jic23@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: imx8qxp: Fix address for command buffer registersPhilipp Rossak
The ADC Command Buffer Register high and low are currently pointing to the wrong address and makes it impossible to perform correct ADC measurements over all channels. According to the datasheet of the imx8qxp the ADC_CMDL register starts at address 0x100 and the ADC_CMDH register starts at address 0x104. This bug seems to be in the kernel since the introduction of this driver. This can be observed by checking all raw voltages of the adc and they are all nearly identical: cat /sys/bus/iio/devices/iio\:device0/in_voltage*_raw 3498 3494 3491 3491 3489 3490 3490 3490 Fixes: 1e23dcaa1a9fa ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20230904220204.23841-1-embed3d@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()Tzung-Bi Shih
cros_ec_sensors_push_data() reads `indio_dev->active_scan_mask` and calls iio_push_to_buffers_with_timestamp() without making sure the `indio_dev` stays in buffer mode. There is a race if `indio_dev` exits buffer mode right before cros_ec_sensors_push_data() accesses them. An use-after-free on `indio_dev->active_scan_mask` was observed. The call trace: [...] _find_next_bit cros_ec_sensors_push_data cros_ec_sensorhub_event blocking_notifier_call_chain cros_ec_irq_thread It was caused by a race condition: one thread just freed `active_scan_mask` at [1]; while another thread tried to access the memory at [2]. Fix it by calling iio_device_claim_buffer_mode() to ensure the `indio_dev` can't exit buffer mode during cros_ec_sensors_push_data(). [1]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/industrialio-buffer.c#L1189 [2]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c#L198 Cc: stable@vger.kernel.org Fixes: aa984f1ba4a4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO") Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230829030622.1571852-1-tzungbi@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handlerGONG, Ruiqi
When compiling with gcc 13 with -Warray-bounds enabled: In file included from drivers/iio/proximity/irsd200.c:15: In function ‘iio_push_to_buffers_with_timestamp’, inlined from ‘irsd200_trigger_handler’ at drivers/iio/proximity/irsd200.c:770:2: ./include/linux/iio/buffer.h:42:46: error: array subscript ‘int64_t {aka long long int}[0]’ is partly outside array bounds of ‘s16[1]’ {aka ‘short int[1]’} [-Werror=array-bounds=] 42 | ((int64_t *)data)[ts_offset] = timestamp; | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ drivers/iio/proximity/irsd200.c: In function ‘irsd200_trigger_handler’: drivers/iio/proximity/irsd200.c:763:13: note: object ‘buf’ of size 2 763 | s16 buf = 0; | ^~~ The problem seems to be that irsd200_trigger_handler() is taking a s16 variable as an int64_t buffer. As Jonathan suggested [1], fix it by extending the buffer to a two-element array of s64. Link: https://github.com/KSPP/linux/issues/331 Link: https://lore.kernel.org/lkml/20230809181329.46c00a5d@jic23-huawei/ [1] Fixes: 3db3562bc66e ("iio: Add driver for Murata IRS-D200") Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com> Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Waqar Hameed <waqar.hameed@axis.com> Tested-by: Waqar Hameed <waqar.hameed@axis.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230810035910.1334706-1-gongruiqi@huaweicloud.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05dt-bindings: iio: rohm,bu27010: add missing vdd-supply to exampleKrzysztof Kozlowski
Bindings require vdd-supply but the example DTS was missing one. This fixes dt_binding_check error: Documentation/devicetree/bindings/iio/light/rohm,bu27010.example.dtb: light-sensor@38: 'vdd-supply' is a required property Fixes: ce2a8c160066 ("dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/20230808063223.80431-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05binder: fix memory leaks of spam and pending workCarlos Llamas
A transaction complete work is allocated and queued for each transaction. Under certain conditions the work->type might be marked as BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT to notify userspace about potential spamming threads or as BINDER_WORK_TRANSACTION_PENDING when the target is currently frozen. However, these work types are not being handled in binder_release_work() so they will leak during a cleanup. This was reported by syzkaller with the following kmemleak dump: BUG: memory leak unreferenced object 0xffff88810e2d6de0 (size 32): comm "syz-executor338", pid 5046, jiffies 4294968230 (age 13.590s) hex dump (first 32 bytes): e0 6d 2d 0e 81 88 ff ff e0 6d 2d 0e 81 88 ff ff .m-......m-..... 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81573b75>] kmalloc_trace+0x25/0x90 mm/slab_common.c:1114 [<ffffffff83d41873>] kmalloc include/linux/slab.h:599 [inline] [<ffffffff83d41873>] kzalloc include/linux/slab.h:720 [inline] [<ffffffff83d41873>] binder_transaction+0x573/0x4050 drivers/android/binder.c:3152 [<ffffffff83d45a05>] binder_thread_write+0x6b5/0x1860 drivers/android/binder.c:4010 [<ffffffff83d486dc>] binder_ioctl_write_read drivers/android/binder.c:5066 [inline] [<ffffffff83d486dc>] binder_ioctl+0x1b2c/0x3cf0 drivers/android/binder.c:5352 [<ffffffff816b25f2>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff816b25f2>] __do_sys_ioctl fs/ioctl.c:871 [inline] [<ffffffff816b25f2>] __se_sys_ioctl fs/ioctl.c:857 [inline] [<ffffffff816b25f2>] __x64_sys_ioctl+0xf2/0x140 fs/ioctl.c:857 [<ffffffff84b30008>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84b30008>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix the leaks by kfreeing these work types in binder_release_work() and handle them as a BINDER_WORK_TRANSACTION_COMPLETE cleanup. Cc: stable@vger.kernel.org Fixes: 0567461a7a6e ("binder: return pending info for frozen async txns") Fixes: a7dc1e6f99df ("binder: tell userspace to dump current backtrace when detected oneway spamming") Reported-by: syzbot+7f10c1653e35933c0f1e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7f10c1653e35933c0f1e Suggested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230922175138.230331-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05firmware_loader: Update contact emails for ABI docsRuss Weight
Update the firmware_loader documentation and corresponding section in the MAINTAINERs file with a new email address. Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20230929151326.311959-1-russell.h.weight@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05Documentation: embargoed-hardware-issues.rst: Clarify prenotifactionKees Cook
There has been a repeated misunderstanding about what the hardware embargo list is for. Clarify the language in the process so that it is clear that only fixes are coordinated. There is explicitly no prenotification process. The list members are also expected to keep total radio silence during embargoes. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: workflows@vger.kernel.org Cc: linux-doc@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231004004959.work.258-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05mcb: remove is_added flag from mcb_device structJorge Sanjuan Garcia
When calling mcb_bus_add_devices(), both mcb devices and the mcb bus will attempt to attach a device to a driver because they share the same bus_type. This causes an issue when trying to cast the container of the device to mcb_device struct using to_mcb_device(), leading to a wrong cast when the mcb_bus is added. A crash occurs when freing the ida resources as the bus numbering of mcb_bus gets confused with the is_added flag on the mcb_device struct. The only reason for this cast was to keep an is_added flag on the mcb_device struct that does not seem necessary. The function device_attach() handles already bound devices and the mcb subsystem does nothing special with this is_added flag so remove it completely. Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device") Cc: stable <stable@kernel.org> Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Co-developed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Signed-off-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Link: https://lore.kernel.org/r/20230906114901.63174-2-JoseJavier.Rodriguez@duagon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02Merge tag 'coresight-fixes-v6.6-1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-linus Suzuki writes: coresight: Fixes for v6.6 Couple of fixes for the CoreSight self-hosted tracing targeting v6.6. Includes : - Fix runtime warnings while reusing the TMC-ETR buffer - Fix (disable) warning when a large buffer is allocated in the flat mode. * tag 'coresight-fixes-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: coresight: tmc-etr: Disable warnings for allocation failures coresight: Fix run time warnings while reusing ETR buffer
2023-10-02Merge tag 'counter-fixes-for-6.6a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus William writes: First set of Counter fixes for 6.6 The counter_get_ext() function would incorrectly refer to the first element of the extensions array to handle component array extensions when they are located at a different index; a fix is provided to index to the correct element in the array for this case. A fix for the microchip-tcb-capture is provided as well to correct an inverted internal GCLK logic for clock selection. * tag 'counter-fixes-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: microchip-tcb-capture: Fix the use of internal GCLK logic counter: chrdev: fix getting array extensions
2023-10-01Linux 6.6-rc4v6.6-rc4Linus Torvalds
2023-10-01Merge tag 'kbuild-fixes-v6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix the module compression with xz so the in-kernel decompressor works - Document a kconfig idiom to express an optional dependency between modules - Make modpost, when W=1 is given, detect broken drivers that reference .exit.* sections - Remove unused code * tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove stale code for 'source' symlink in packaging scripts modpost: Don't let "driver"s reference .exit.* vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros modpost: add missing else to the "of" check Documentation: kbuild: explain handling optional dependencies kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules
2023-10-01Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain to issues which were introduced after 6.5" * tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: Crash: add lock to serialize crash hotplug handling selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() mm, memcg: reconsider kmem.limit_in_bytes deprecation mm: zswap: fix potential memory corruption on duplicate store arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries mm: hugetlb: add huge page size param to set_huge_pte_at() maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states maple_tree: add mas_is_active() to detect in-tree walks nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() mm: abstract moving to the next PFN mm: report success more often from filemap_map_folio_range() fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
2023-10-01Merge tag 'char-misc-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single, much requested, fix for a set of misc drivers to resolve a much reported regression in the -rc series that has also propagated back to the stable releases. Sorry for the delay, lots of conference travel for a few weeks put me very far behind in patch wrangling. It has been reported by many to resolve the reported problem, and has been in linux-next with no reported issues" * tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe
2023-10-01Merge tag 'tty-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver fixes from Greg KH: "Here are two tty/serial driver fixes for 6.6-rc4 that resolve some reported regressions: - revert a n_gsm change that ended up causing problems - 8250_port fix for irq data both have been in linux-next for over a week with no reported problems" * tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" serial: 8250_port: Check IRQ data before use
2023-10-01Merge tag 'x86-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for AMD-derived Hygon processors, and fix a SGX kernel crash in the page fault handler that can trigger when ksgxd races to reclaim the SECS special page, by making the SECS page unswappable" * tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race x86/srso: Add SRSO mitigation for Hygon processors x86/kgdb: Fix a kerneldoc warning when build with W=1
2023-10-01Merge tag 'timers-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a spurious kernel warning during CPU hotplug events that may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning" * tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Tag (hr)timer softirq as hotplug safe
2023-10-01Merge tag 'sched-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a RT tasks related lockup/live-lock during CPU offlining" * tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix live lock between select_fallback_rq() and RT push
2023-10-01Merge tag 'perf-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fixes from Ingo Molnar: "Misc fixes: work around an AMD microcode bug on certain models, and fix kexec kernel PMI handlers on AMD systems that get loaded on older kernels that have an unexpected register state" * tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd: Do not WARN() on every IRQ perf/x86/amd/core: Fix overflow reset on hotplug
2023-10-01kbuild: remove stale code for 'source' symlink in packaging scriptsMasahiro Yamada
Since commit d8131c2965d5 ("kbuild: remove $(MODLIB)/source symlink"), modules_install does not create the 'source' symlink. Remove the stale code from builddeb and kernel.spec. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-10-01modpost: Don't let "driver"s reference .exit.*Uwe Kleine-König
Drivers must not reference functions marked with __exit as these likely are not available when the code is built-in. There are few creative offenders uncovered for example in ARCH=amd64 allmodconfig builds. So only trigger the section mismatch warning for W=1 builds. The dual rule that drivers must not reference .init.* is implemented since commit 0db252452378 ("modpost: don't allow *driver to reference .init.*") which however missed that .exit.* should be handled in the same way. Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to find this improvement. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-10-01vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macrosMasahiro Yamada
Remove the left-over of commit e24f6628811e ("modpost: remove all traces of cpuinit/cpuexit sections"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2023-10-01modpost: add missing else to the "of" checkMauricio Faria de Oliveira
Without this 'else' statement, an "usb" name goes into two handlers: the first/previous 'if' statement _AND_ the for-loop over 'devtable', but the latter is useless as it has no 'usb' device_id entry anyway. Tested with allmodconfig before/after patch; no changes to *.mod.c: git checkout v6.6-rc3 make -j$(nproc) allmodconfig make -j$(nproc) olddefconfig make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/before # apply patch make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/after diff -r /tmp/before/ /tmp/after/ # no difference Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property") Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-09-30Merge tag 'soc-fixes-6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are the latest bug fixes that have come up in the soc tree. Most of these are fairly minor. Most notably, the majority of changes this time are not for dts files as usual. - Updates to the addresses of the broadcom and aspeed entries in the MAINTAINERS file. - Defconfig updates to address a regression on samsung and a build warning from an unknown Kconfig symbol - Build fixes for the StrongARM and Uniphier platforms - Code fixes for SCMI and FF-A firmware drivers, both of which had a simple bug that resulted in invalid data, and a lesser fix for the optee firmware driver - Multiple fixes for the recently added loongson/loongarch "guts" soc driver - Devicetree fixes for RISC-V on the startfive platform, addressing issues with NOR flash, usb and uart. - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with clock, gpio, hdmi settings and the Makefile - Bug fixes for i.MX firmware code and the OCOTP soc driver - Multiple fixes for the TI sysc bus driver - Minor dts updates for TI omap dts files, to address boot time warnings and errors" * tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) MAINTAINERS: Fix Florian Fainelli's email address arm64: defconfig: enable syscon-poweroff driver ARM: locomo: fix locomolcd_power declaration soc: loongson: loongson2_guts: Remove unneeded semicolon soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource() soc: loongson: loongson_pm2: Populate children syscon nodes dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child soc: loongson: loongson_pm2: Drop useless of_device_id compatible dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible soc: loongson: loongson_pm2: Add dependency for INPUT arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y ARM: uniphier: fix cache kernel-doc warnings MAINTAINERS: aspeed: Update Andrew's email address MAINTAINERS: aspeed: Update git tree URL firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND arm64: dts: imx: Add imx8mm-prt8mm.dtb to build arm64: dts: imx8mm-evk: Fix hdmi@3d node soc: imx8m: Enable OCOTP clock for imx8mm before reading registers arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock arm64: dts: imx8mp: Fix SDMA2/3 clocks ...
2023-09-30Merge tag 'trace-v6.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Make sure 32-bit applications using user events have aligned access when running on a 64-bit kernel. - Add cond_resched in the loop that handles converting enums in print_fmt string is trace events. - Fix premature wake ups of polling processes in the tracing ring buffer. When a task polls waiting for a percentage of the ring buffer to be filled, the writer still will wake it up at every event. Add the polling's percentage to the "shortest_full" list to tell the writer when to wake it up. - For eventfs dir lookups on dynamic events, an event system's only event could be removed, leaving its dentry with no children. This is totally legitimate. But in eventfs_release() it must not access the children array, as it is only allocated when the dentry has children. * tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Test for dentries array allocated in eventfs_release() tracing/user_events: Align set_bit() address for all archs tracing: relax trace_event_eval_update() execution with cond_resched() ring-buffer: Update "shortest_full" in polling
2023-09-30eventfs: Test for dentries array allocated in eventfs_release()Steven Rostedt (Google)
The dcache_dir_open_wrapper() could be called when a dynamic event is being deleted leaving a dentry with no children. In this case the dlist->dentries array will never be allocated. This needs to be checked for in eventfs_release(), otherwise it will trigger a NULL pointer dereference. Link: https://lore.kernel.org/linux-trace-kernel/20230930090106.1c3164e9@rorschach.local.home Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: ef36b4f92868 ("eventfs: Remember what dentries were created on dir open") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30tracing/user_events: Align set_bit() address for all archsBeau Belgrave
All architectures should use a long aligned address passed to set_bit(). User processes can pass either a 32-bit or 64-bit sized value to be updated when tracing is enabled when on a 64-bit kernel. Both cases are ensured to be naturally aligned, however, that is not enough. The address must be long aligned without affecting checks on the value within the user process which require different adjustments for the bit for little and big endian CPUs. Add a compat flag to user_event_enabler that indicates when a 32-bit value is being used on a 64-bit kernel. Long align addresses and correct the bit to be used by set_bit() to account for this alignment. Ensure compat flags are copied during forks and used during deletion clears. Link: https://lore.kernel.org/linux-trace-kernel/20230925230829.341-2-beaub@linux.microsoft.com Link: https://lore.kernel.org/linux-trace-kernel/20230914131102.179100-1-cleger@rivosinc.com/ Cc: stable@vger.kernel.org Fixes: 7235759084a4 ("tracing/user_events: Use remote writes for event enablement") Reported-by: Clément Léger <cleger@rivosinc.com> Suggested-by: Clément Léger <cleger@rivosinc.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30tracing: relax trace_event_eval_update() execution with cond_resched()Clément Léger
When kernel is compiled without preemption, the eval_map_work_func() (which calls trace_event_eval_update()) will not be preempted up to its complete execution. This can actually cause a problem since if another CPU call stop_machine(), the call will have to wait for the eval_map_work_func() function to finish executing in the workqueue before being able to be scheduled. This problem was observe on a SMP system at boot time, when the CPU calling the initcalls executed clocksource_done_booting() which in the end calls stop_machine(). We observed a 1 second delay because one CPU was executing eval_map_work_func() and was not preempted by the stop_machine() task. Adding a call to cond_resched() in trace_event_eval_update() allows other tasks to be executed and thus continue working asynchronously like before without blocking any pending task at boot time. Link: https://lore.kernel.org/linux-trace-kernel/20230929191637.416931-1-cleger@rivosinc.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Clément Léger <cleger@rivosinc.com> Tested-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30ring-buffer: Update "shortest_full" in pollingSteven Rostedt (Google)
It was discovered that the ring buffer polling was incorrectly stating that read would not block, but that's because polling did not take into account that reads will block if the "buffer-percent" was set. Instead, the ring buffer polling would say reads would not block if there was any data in the ring buffer. This was incorrect behavior from a user space point of view. This was fixed by commit 42fb0a1e84ff by having the polling code check if the ring buffer had more data than what the user specified "buffer percent" had. The problem now is that the polling code did not register itself to the writer that it wanted to wait for a specific "full" value of the ring buffer. The result was that the writer would wake the polling waiter whenever there was a new event. The polling waiter would then wake up, see that there's not enough data in the ring buffer to notify user space and then go back to sleep. The next event would wake it up again. Before the polling fix was added, the code would wake up around 100 times for a hackbench 30 benchmark. After the "fix", due to the constant waking of the writer, it would wake up over 11,0000 times! It would never leave the kernel, so the user space behavior was still "correct", but this definitely is not the desired effect. To fix this, have the polling code add what it's waiting for to the "shortest_full" variable, to tell the writer not to wake it up if the buffer is not as full as it expects to be. Note, after this fix, it appears that the waiter is now woken up around 2x the times it was before (~200). This is a tremendous improvement from the 11,000 times, but I will need to spend some time to see why polling is more aggressive in its wakeups than the read blocking code. Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Fixes: 42fb0a1e84ff ("tracing/ring-buffer: Have polling block on watermark") Reported-by: Julia Lawall <julia.lawall@inria.fr> Tested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-30Merge tag 'dma-mapping-6.6-2023-09-30' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - fix the narea calculation in swiotlb initialization (Ross Lagerwall) - fix the check whether a device has used swiotlb (Petr Tesarik) * tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix the check whether a device has used software IO TLB swiotlb: use the calculated number of areas
2023-09-30Merge tag 'iomap-6.6-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull iomap fixes from Darrick Wong: - Handle a race between writing and shrinking block devices by returning EIO - Fix a typo in a comment * tag 'iomap-6.6-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Spelling s/preceeding/preceding/g iomap: add a workaround for racy i_size updates on block devices
2023-09-30Merge tag 'i2c-for-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Usual business: a driver fix, a DT fix, a minor core fix" * tag 'i2c-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: npcm7xx: Fix callback completion ordering i2c: mux: Avoid potential false error message in i2c_mux_add_adapter dt-bindings: i2c: mxs: Pass ref and 'unevaluatedProperties: false'
2023-09-30Merge tag 'acpi-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a possible NULL pointer dereference in the error path of acpi_video_bus_add() resulting from recent changes (Dinghao Liu)" * tag 'acpi-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Fix NULL pointer dereference in acpi_video_bus_add()
2023-09-30Merge tag 'powerpc-6.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix arch_stack_walk_reliable(), used by live patching - Fix powerpc selftests to work with run_kselftest.sh Thanks to Joe Lawrence and Petr Mladek. * tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix emit_tests to work with run_kselftest.sh powerpc/stacktrace: Fix arch_stack_walk_reliable()
2023-09-30Merge tag 'nfsd-6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix NFSv4 READ corner case * tag 'nfsd-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Fix zero NFSv4 READ results when RQ_SPLICE_OK is not set
2023-09-30Merge tag '6.6-rc3-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fix from Steve French: "Fix for password freeing potential oops (also for stable)" * tag '6.6-rc3-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: fs/smb/client: Reset password pointer to NULL
2023-09-29Crash: add lock to serialize crash hotplug handlingBaoquan He
Eric reported that handling corresponding crash hotplug event can be failed easily when many memory hotplug event are notified in a short period. They failed because failing to take __kexec_lock. ======= [ 78.714569] Fallback order for Node 0: 0 [ 78.714575] Built 1 zonelists, mobility grouping on. Total pages: 1817886 [ 78.717133] Policy zone: Normal [ 78.724423] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate [ 78.727207] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate [ 80.056643] PEFILE: Unsigned PE binary ======= The memory hotplug events are notified very quickly and very many, while the handling of crash hotplug is much slower relatively. So the atomic variable __kexec_lock and kexec_trylock() can't guarantee the serialization of crash hotplug handling. Here, add a new mutex lock __crash_hotplug_lock to serialize crash hotplug handling specifically. This doesn't impact the usage of __kexec_lock. Link: https://lkml.kernel.org/r/20230926120905.392903-1-bhe@redhat.com Fixes: 247262756121 ("crash: add generic infrastructure for crash hotplug support") Signed-off-by: Baoquan He <bhe@redhat.com> Tested-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-29selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and ↵Juntong Deng
hugetlb_reparenting_test.sh that may cause error According to the awk manual, the -e option does not need to be specified in front of 'program' (unless you need to mix program-file). The redundant -e option can cause error when users use awk tools other than gawk (for example, mawk does not support the -e option). Error Example: awk: not an option: -e Link: https://lkml.kernel.org/r/VI1P193MB075228810591AF2FDD7D42C599C3A@VI1P193MB0752.EURP193.PROD.OUTLOOK.COM Signed-off-by: Juntong Deng <juntong.deng@outlook.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-29mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are ↵Yang Shi
specified When calling mbind() with MPOL_MF_{MOVE|MOVEALL} | MPOL_MF_STRICT, kernel should attempt to migrate all existing pages, and return -EIO if there is misplaced or unmovable page. Then commit 6f4576e3687b ("mempolicy: apply page table walker on queue_pages_range()") messed up the return value and didn't break VMA scan early ianymore when MPOL_MF_STRICT alone. The return value problem was fixed by commit a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified"), but it broke the VMA walk early if unmovable page is met, it may cause some pages are not migrated as expected. The code should conceptually do: if (MPOL_MF_MOVE|MOVEALL) scan all vmas try to migrate the existing pages return success else if (MPOL_MF_MOVE* | MPOL_MF_STRICT) scan all vmas try to migrate the existing pages return -EIO if unmovable or migration failed else /* MPOL_MF_STRICT alone */ break early if meets unmovable and don't call mbind_range() at all else /* none of those flags */ check the ranges in test_walk, EFAULT without mbind_range() if discontig. Fixed the behavior. Link: https://lkml.kernel.org/r/20230920223242.3425775-1-yang@os.amperecomputing.com Fixes: a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified") Signed-off-by: Yang Shi <yang@os.amperecomputing.com> Cc: Hugh Dickins <hughd@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oscar Salvador <osalvador@suse.de> Cc: Rafael Aquini <aquini@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-29mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()Jinjie Ruan
When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected. Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables"), the damon_destroy_ctx() is removed, but still call damon_new_target() and damon_new_region(), the damon_region which is allocated by kmem_cache_alloc() in damon_new_region() and the damon_target which is allocated by kmalloc in damon_new_target() are not freed. And the damon_region which is allocated in damon_new_region() in damon_set_regions() is also not freed. So use damon_destroy_target to free all the damon_regions and damon_target. unreferenced object 0xffff888107c9a940 (size 64): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `............... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079cc740 (size 56): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9ac40 (size 64): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079ccc80 (size 56): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9af40 (size 64): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 20 a2 76 07 81 88 ff ff b8 a6 76 07 81 88 ff ff .v.......v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776a200 (size 56): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776a740 (size 56): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.025s) hex dump (first 32 bytes): 3d 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 =.......?....... 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0 [<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888108038240 (size 64): comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 03 00 00 00 6b 6b 6b 6b ............kkkk 48 ad 76 07 81 88 ff ff 98 ae 76 07 81 88 ff ff H.v.......v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776ad28 (size 56): comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0 [<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0 [<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 Link: https://lkml.kernel.org/r/20230925072100.3725620-1-ruanjinjie@huawei.com Fixes: 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-29mm, memcg: reconsider kmem.limit_in_bytes deprecationMichal Hocko
This reverts commits 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") and partially reverts 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes") which have incrementally removed support for the kernel memory accounting hard limit. Unfortunately it has turned out that there is still userspace depending on the existence of memory.kmem.limit_in_bytes [1]. The underlying functionality is not really required but the non-existent file just confuses the userspace which fails in the result. The patch to fix this on the userspace side has been submitted but it is hard to predict how it will propagate through the maze of 3rd party consumers of the software. Now, reverting alone 86327e8eb94c is not an option because there is another set of userspace which cannot cope with ENOTSUPP returned when writing to the file. Therefore we have to go and revisit 58056f77502f as well. There are two ways to go ahead. Either we give up on the deprecation and fully revert 58056f77502f as well or we can keep kmem.limit_in_bytes but make the write a noop and warn about the fact. This should work for both known breaking workloads which depend on the existence but do not depend on the hard limit enforcement. Note to backporters to stable trees. a8c49af3be5f ("memcg: add per-memcg total kernel memory stat") introduced in 4.18 has added memcg_account_kmem so the accounting is not done by obj_cgroup_charge_pages directly for v1 anymore. Prior kernels need to add it explicitly (thanks to Johannes for pointing this out). [akpm@linux-foundation.org: fix build - remove unused local] Link: http://lkml.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net [1] Link: https://lkml.kernel.org/r/ZRE5VJozPZt9bRPy@dhcp22.suse.cz Fixes: 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") Fixes: 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Tejun heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 12:25:30 +0000