Age | Commit message (Collapse) | Author |
|
[Why]
Idle power optimization was disabled on dcn35 by default.
[How]
Enable by setting disable_idle_power_optimizations to false.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Instability is observed on DCN35 if idle power optimization is enabled.
[How]
Disable IPS until issue is resolved.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SMN address is larger than 32 bits for registers on different AID's
Updating existing interface to support access to such registers.
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Variable remainder is being initialized with a value that is never read,
the assignment is redundant and can be removed. Also add a newline
after the declaration to clean up the coding style.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
- Fix couple unfined behavior cases to calm UBSAN and clang (Matt Brost, Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYsbDPBLUiqDevLt@intel.com
|
|
Correct all kernel-doc notation on pvr_device.h so that there are no
kernel-doc warnings remaining.
pvr_device.h:292: warning: Excess struct member 'active' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'idle' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'work' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'old_kccb_cmds_executed' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'kccb_stall_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'ccb' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_q' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_obj' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'slot_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'reserved_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'waiters' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'fence_ctx' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'id' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'seqno' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'active' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'idle' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'work' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'old_kccb_cmds_executed' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'kccb_stall_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'ccb' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_q' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_obj' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'slot_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'reserved_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'waiters' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'fence_ctx' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'id' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'seqno' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Frank Binns <frank.binns@imgtec.com>
Cc: Donald Robson <donald.robson@imgtec.com>
Cc: Matt Coster <matt.coster@imgtec.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231054910.31805-1-rdunlap@infradead.org
|
|
Update kernel-doc comments in <drm/drm_gpuvm.h> to correct all
kernel-doc warnings:
drm_gpuvm.h:148: warning: Excess struct member 'addr' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'offset' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'obj' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'entry' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member '__subtree_last' description in 'drm_gpuva'
drm_gpuvm.h:192: warning: No description found for return value of 'drm_gpuva_invalidated'
drm_gpuvm.h:331: warning: Excess struct member 'tree' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'local_list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'lock' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'local_list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'lock' description in 'drm_gpuvm'
drm_gpuvm.h:352: warning: No description found for return value of 'drm_gpuvm_get'
drm_gpuvm.h:545: warning: Excess struct member 'fn' description in 'drm_gpuvm_exec'
drm_gpuvm.h:545: warning: Excess struct member 'priv' description in 'drm_gpuvm_exec'
drm_gpuvm.h:597: warning: missing initial short description on line:
* drm_gpuvm_exec_resv_add_fence()
drm_gpuvm.h:616: warning: missing initial short description on line:
* drm_gpuvm_exec_validate()
drm_gpuvm.h:623: warning: No description found for return value of 'drm_gpuvm_exec_validate'
drm_gpuvm.h:698: warning: Excess struct member 'gpuva' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'entry' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'gem' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'evict' description in 'drm_gpuvm_bo'
drm_gpuvm.h:726: warning: No description found for return value of 'drm_gpuvm_bo_get'
drm_gpuvm.h:738: warning: missing initial short description on line:
* drm_gpuvm_bo_gem_evict()
drm_gpuvm.h:740: warning: missing initial short description on line:
* drm_gpuvm_bo_gem_evict()
drm_gpuvm.h:698: warning: Excess struct member 'evict' description in 'drm_gpuvm_bo'
drm_gpuvm.h:844: warning: Excess struct member 'addr' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'range' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'offset' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'obj' description in 'drm_gpuva_op_map'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231054856.31786-1-rdunlap@infradead.org
|
|
Remove some unused declarations probably left behind after some
refactoring.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231221105414.1518267-1-jani.nikula@intel.com
|
|
Having a different value for op is not possible: this is already kept
out of user-visible warning by the check in xe_wait_user_fence_ioctl()
if op > MAX_OP. The warning is useful as if this switch() is not update
when a new op is added, it should be triggered.
Fix warning as reported by 0-DAY CI Kernel:
drivers/gpu/drm/xe/xe_wait_user_fence.c:46:2: warning: variable 'passed' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
Closes: https://lore.kernel.org/oe-kbuild-all/202312170357.KPSinwPs-lkp@intel.com/
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20231218163301.3453285-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
add_preempt_fences() calls dma_resv_reserve_fences() with num_fences ==
0 resulting in the below UBSAN splat. Short circuit add_preempt_fences()
if num_fences == 0.
[ 58.652241] ================================================================================
[ 58.660736] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 58.667281] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 58.674539] CPU: 2 PID: 1170 Comm: xe_gpgpu_fill Not tainted 6.6.0-rc3-guc+ #630
[ 58.674545] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.3243.A01.2006102133 06/10/2020
[ 58.674547] Call Trace:
[ 58.674548] <TASK>
[ 58.674550] dump_stack_lvl+0x92/0xb0
[ 58.674555] __ubsan_handle_shift_out_of_bounds+0x15a/0x300
[ 58.674559] ? rcu_is_watching+0x12/0x60
[ 58.674564] ? software_resume+0x141/0x210
[ 58.674575] ? new_vma+0x44b/0x600 [xe]
[ 58.674606] dma_resv_reserve_fences.cold+0x40/0x66
[ 58.674612] new_vma+0x4b3/0x600 [xe]
[ 58.674638] xe_vm_bind_ioctl+0xffd/0x1e00 [xe]
[ 58.674663] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 58.674680] drm_ioctl_kernel+0xc1/0x170
[ 58.674686] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 58.674703] drm_ioctl+0x247/0x4c0
[ 58.674709] ? find_held_lock+0x2b/0x80
[ 58.674716] __x64_sys_ioctl+0x8c/0xb0
[ 58.674720] do_syscall_64+0x3c/0x90
[ 58.674723] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 58.674727] RIP: 0033:0x7fce4bd1aaff
[ 58.674730] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ 58.674731] RSP: 002b:00007ffc57434050 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 58.674734] RAX: ffffffffffffffda RBX: 00007ffc574340e0 RCX: 00007fce4bd1aaff
[ 58.674736] RDX: 00007ffc574340e0 RSI: 0000000040886445 RDI: 0000000000000003
[ 58.674737] RBP: 0000000040886445 R08: 0000000000000002 R09: 00007ffc574341b0
[ 58.674739] R10: 000055de43eb3780 R11: 0000000000000246 R12: 00007ffc574340e0
[ 58.674740] R13: 0000000000000003 R14: 00007ffc574341b0 R15: 0000000000000001
[ 58.674747] </TASK>
[ 58.674748] ================================================================================
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231215230203.719244-1-matthew.brost@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
No functional modification involved.
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:1708 rk3588_calc_cru_cfg() warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7778
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219062635.100718-1-jiapeng.chong@linux.alibaba.com
|
|
Marek Report a possible irq lock inversion dependency warning when
commit 81a06f1d02e5 ("Revert "drm/rockchip: vop2: Use regcache_sync()
to fix suspend/resume"") lands linux-next.
I can reproduce this warning with:
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_LOCKDEP=y
It seems than when use regmap_reinit_cache at runtime whith Mark's
commit 3d59c22bbb8d ("drm/rockchip: vop2: Convert to use maple tree
register cache"), it will trigger a possible irq lock inversion dependency
warning.
One solution is switch back to REGCACHE_RBTREE, but it seems that
REGCACHE_MAPLE is the future, so I avoid using regmap_reinit_cache,
and drop all the regcache when vop is disabled, then we get a fresh
start at next enbable time.
Fixes: 81a06f1d02e5 ("Revert "drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume"")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/98a9f15d-30ac-47bf-9b93-3aa2c9900f7b@samsung.com/
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
[dropped the large kernel log of the lockdep report from the message]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231217084415.2373043-1-andyshrk@163.com
|
|
Sprinkle some extra WARNs around so that we might catch
premature framebuffer destruction more readily.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211081625.25704-2-ville.syrjala@linux.intel.com
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl()
we proceed to unref the fb and then retry the whole thing from the top.
But we forget to reset the fb pointer back to NULL, and so if we then
get another error during the retry, before the fb lookup, we proceed
the unref the same fb again without having gotten another reference.
The end result is that the fb will (eventually) end up being freed
while it's still in use.
Reset fb to NULL once we've unreffed it to avoid doing it again
until we've done another fb lookup.
This turned out to be pretty easy to hit on a DG2 when doing async
flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I
saw that drm_closefb() simply got stuck in a busy loop while walking
the framebuffer list. Fortunately I was able to convince it to oops
instead, and from there it was easier to track down the culprit.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211081625.25704-1-ville.syrjala@linux.intel.com
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
We need to configure VSC Select field in video dip ctl if we want to have
e.g. colorimetry date in our VSC SDP.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-8-jouni.hogander@intel.com
|
|
VSC SDP sending is taken care by PSR HW and it's not enabled in
VIDEO_DIP_CTL when PSR is enabled. Readback of VSC SDP is depending on
VSC_SDP being set in intel_crtc_state->infoframes.enabled. In case of PSR
setting this flag is taken care by PSR code -> read back PSR configuration
before reading VSC SDP otherwise we get pipeconfig mismatch error.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-7-jouni.hogander@intel.com
|
|
Pipe config check is currently ignoring vsc sdp changes completely
if psr is enabled. We want to ignore only PSR part of it as there
might be changes in colorimetry data. Also read back vsc_sdp when psr is
used.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-6-jouni.hogander@intel.com
|
|
Currently colorimetry data is not added for psr1 or non-psr case.
Fix this by adding it as needed.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-5-jouni.hogander@intel.com
|
|
There is no specific reason to prepare VSC SDP for PSR case somehow
differently. Unify PSR and non-PSR preparation.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-4-jouni.hogander@intel.com
|
|
Colorimetry support is not really a PSR specific thing. Move it to intel_dp
struct and use it also when preparing vsc sdp for non-PSR case.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-3-jouni.hogander@intel.com
|
|
There is no really need to have separate vsc for psr usage. Use
intel_crtc_state->infoframes.vsc instead.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-2-jouni.hogander@intel.com
|
|
Fail repeater authentication step in case RX_INFO indicates
HDCP1.x or HDCP2.0/2.1 device is present downstream in repeater
topology and content type set by userspace is Type1.
--v2
-Fix build error.
--v3
-remove mst encoder check as branch device also act as repeater
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215050915.2070119-1-suraj.kandpal@intel.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver changes for v6.8.
The notable changes are:
- uAPI changes:
- Add sysfs entry to allow users to identify a device minor id with its
debugfs path
- Add sysfs entry to expose the device's module id as given to us from
the f/w
- Add signed device information retrieval through the INFO ioctl
- New features and improvements:
- Update documentation of debugfs paths
- Add support for Gaudi2C device (new PCI revision number)
- Add pcie reset prepare/done hooks
- Firmware related fixes and changes:
- Print three instances version numbers of Infineon second stage
- Assume hard-reset is done by f/w upon PCIe AXI drain
- Bug fixes and code cleanups:
- Fix information leak in sec_attest_info()
- Avoid overriding existing undefined opcode data in Gaudi2
- Multiple Queue Manager (QMAN) fixes for Gaudi2
- Set hard reset flag if graceful reset is skipped
- Remove 'get temperature' debug print
- Fix the new Event Queue heartbeat mechanism
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYFpihZscr/fsRRd@ogabbay-vm-u22.habana-labs.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
More fixes for the new imagination drier, a DT node refcount fix for the
new aux bridge driver and a missing header fix for the LUT management
code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/42dw6ok2g5kz5xljrw7t6lzrgafhwslgw3j4rbaaivluv24vkj@k4smx5r3y2gh
|
|
Add a dependency on CONFIG_64BIT since currently the xe driver doesn't
build on 32bits. It may be enabled again after all the issues are fixed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231221222809.4123220-2-lucas.demarchi@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Introduce a new DRM driver for Intel GPUs
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms. The experimental support starts with Tiger Lake.
i915 will continue be the main production driver for the platforms
up to Meteor Lake and Alchemist. Then the goal is to make this Intel
Xe driver the primary driver for Lunar Lake and newer platforms.
It uses most, if not all, of the key drm concepts, in special: TTM,
drm-scheduler, drm-exec, drm-gpuvm/gpuva and others.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: add an extra X86 check, fix a typo, fix drm_exec_init interface
change].
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYSwLgXZUZ57qGPQ@intel.com
|
|
"err" is not initialized when failing to create and add the freq0 sysfs
file. Remove it from the message. This fixes the following warning with
clang:
../drivers/gpu/drm/xe/xe_gt_freq.c:202:30: error: variable 'err' is uninitialized when used here [-Werror,-Wuninitialized]
kobject_name(gt->sysfs), err);
^~~
Fixes: bef52b5c7a19 ("drm/xe: Create a xe_gt_freq component for raw management and sysfs")
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20231220161923.3740489-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
As part of the FW definitions, we declare each blob as required via the
MODULE_FIRMWARE() macro. This causes the initramfs update (or equivalent
process) to look for the blobs on disk when the kernel is installed;
therefore, we need to make sure that all FWs we define are available in
linux-firmware.
We currently don't plan to push the PVC blob to linux-firmware, while the
LNL one will only be pushed once we have machines in CI to test it, so we
need to remove them from the list for now.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Ideally this header could be included without the CONFIG_FAULT_INJECTION
and it would take care itself for the includes it needs.
So, let's temporary workaround this by moving this below and including
only when CONFIG_FAULT_INJECTION is selected to avoid build breakages.
Another solution would be us including the linux/types.h as well, but
this creates unnecessary cases.
Reference: https://lore.kernel.org/all/20230816134748.979231-1-himal.prasad.ghimiray@intel.com/
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Introduce the Maintainers of the new drm/xe driver for upcoming
Intel GPUs.
Since it has a shared display with drm/i915, let's also create a
dedicated block to group display related files. But without any
substantial change to the i915 side. The display patches will
continue to flow through i915 from drm-intel-next branches for now.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This kernel uevent is getting removed for now. It will come
back later with a better future proof name.
v2: Rebase (Francois Dugast)
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
Bring those defines close to the context where they can be used. Also
apply indentation as it is done for other subsets of defines.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Move those defines to align on the rule used elsewhere in the file which
was introduced by commit 4f082f2c3a37 ("drm/xe: Move defines before
relevant fields").
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Complete the documentation of some structs by adding functional
examples of user space code. Those examples are intentionally kept
very simple. Put together, they provide a foundation for a minimal
application that executes a job using the Xe driver.
v2: Remove use of DRM_XE_VM_BIND_FLAG_ASYNC (Francois Dugast)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In order to make proper use the uAPI, a prerequisite is to understand
some key concepts about the discrete GPU devices which are supported
by the Xe driver. For example, some structs defined in the uAPI are an
abstraction of a hardware component with a specific role.
This diagram helps to build a mental representation of a device how it
is seen by the Xe driver. As written in the documentation, it does not
intend to be a literal representation of an existing device. A lot
more information could be added but the intention for the overview is
to keep it simple, and go into detail as needed in other sections.
v2: Add GT1 inside Tile0 (José Roberto de Souza)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The uAPI should stay generic in regarding to the bitmask. It is
the userspace responsibility to check for the type/class of the
memory, without any assumption.
Also add comments inside the code to explain how it is actually
constructed so we don't accidentally change the assignment of
the instance and the masks.
No functional change in this patch. It only explains and document
the memory_region masks. A further follow-up work with the
organization of all memory regions around struct xe_mem_regions
is desired, but not part of this patch.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
No functional change in this patch.
Let's ensure all of our structs are documented and with a certain
standard. Also, let's have an overview and list of IOCTLs as the
very beginning of the generated HTML doc.
v2: Nits (Lucas De Marchi)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
This patch doesn't modify any text or uapi entries themselves.
It only move things up and down aiming a better organization of the uAPI.
While fixing the documentation I noticed that query_engine_cs_cycles
was in the middle of the memory_region info. Then I noticed more
mismatches on the order when compared to the order of the IOCTL
and QUERY entries declaration. So this patch aims to bring some
order to the uAPI so it gets easier to read and the documentation
generated in the end is able to tell a consistent story.
Overall order:
1. IOCTL definition
2. Extension definition and helper structs
3. IOCTL's Query structs in the order of the Query's entries.
4. The rest of IOCTL structs in the order of IOCTL declaration.
5. uEvents
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
As there is no direct way to make comments of constants directly
visible in the kernel doc, move them to the description of the
structure where they can be used. By doing so they appear in the
"Description" section of the struct documentation.
v2: Remove DRM_XE_UFENCE_WAIT_MASK_* (Francois Dugast)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add a documentation on the content and format of when using query type
DRM_XE_DEVICE_QUERY_HWCONFIG. The list of keys can be found in IGT
under lib/intel_hwconfig_types.h.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Provide a description of the keys used the struct
drm_xe_query_config info array.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/637
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Document the behavior of the driver for IOCTL DRM_IOCTL_XE_DEVICE_QUERY
depending on the size value provided in struct drm_xe_device_query.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This removes the documentation build warnings below:
include/uapi/drm/xe_drm.h:828: warning: Function parameter or \
member 'pad2' not described in 'drm_xe_vm_bind_op'
include/uapi/drm/xe_drm.h:875: warning: Function parameter or \
member 'pad2' not described in 'drm_xe_vm_bind'
include/uapi/drm/xe_drm.h:1006: warning: Function parameter or \
member 'handle' not described in 'drm_xe_sync'
include/uapi/drm/xe_drm.h:1006: warning: Function parameter or \
member 'timeline_value' not described in 'drm_xe_sync'
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add a comment to each struct to complete documentation, ensure all
struct appear in the kernel doc, and bind structs to IOCTLs.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Remove concept of async vs sync VM bind queues, rather make all binds
async.
The following bits have dropped from the uAPI:
DRM_XE_ENGINE_CLASS_VM_BIND_ASYNC
DRM_XE_ENGINE_CLASS_VM_BIND_SYNC
DRM_XE_VM_CREATE_FLAG_ASYNC_DEFAULT
DRM_XE_VM_BIND_FLAG_ASYNC
To implement sync binds the UMD is expected to use the out-fence
interface.
v2: Send correct version
v3: Drop drm_xe_syncs
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
To ensure consistency and avoid possible later conflicts,
let's add drm_xe prefix to xe_user_extension struct.
Cc: Francois Dugast <francois.dugast@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
|
|
PMU uapi is likely to change in the future. Till the uapi is finalized,
remove PMU from Xe. PMU can be re-added after uapi is finalized.
v2: Include xe_drm.h in xe/tests/xe_dma_buf.c (Francois)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Those are just possible values for the comparison mask but they are not
specific magic values. Let's keep them as examples in the documentation
but remove them from the uAPI.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The exec_queue_set_property feature was removed in a previous
commit 0f1d88f27864 ("drm/xe/uapi: Kill exec_queue_set_property") and
is no longer usable, struct drm_xe_exec_queue_set_property does not
exist anymore, so let's remove this.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently xe_wait_user_fence_ioctl is not checking exec_queue state
and blocking until timeout, with this patch wakeup the blocking wait
if exec_queue reset happen and returning proper error code
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Kempczynski Zbigniew <Zbigniew.Kempczynski@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Mateusz Naklicki <mateusz.naklicki@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|