| Age | Commit message (Collapse) | Author |
|---|
|
Add dt-bindings for ADXL380/ADLX382 low noise density, low
power, 3-axis accelerometer with selectable measurement ranges.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20240708104114.29894-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
BMP2xx, BME280, BMP3xx, and BMP5xx use continuous buffers for their
temperature, pressure and humidity readings. This facilitates the
use of burst/bulk reads in order to acquire data faster. The
approach is different from the one used in oneshot captures.
BMP085 & BMP1xx devices use a completely different measurement
process that is well defined and is used in their buffer_handler().
Suggested-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://lore.kernel.org/r/20240512230524.53990-6-vassilisamir@gmail.com
Link: https://patch.msgid.link/20240628171726.124852-4-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add extra IIO_CHAN_INFO_SCALE and IIO_CHAN_INFO_RAW channels in order
to be able to calculate the processed value with standard userspace
IIO tools. Can be used for triggered buffers as well.
Even though it is not a good design choice to have SCALE, RAW and
PROCESSED together, the PROCESSED channel is kept for ABI compatibility.
While at it, separate BMPxxx and BMExxx device channels since BME
supports also humidity measurements.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://lore.kernel.org/r/20240512230524.53990-5-vassilisamir@gmail.com
Link: https://patch.msgid.link/20240628171726.124852-3-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add the coefficients for the IIO standard units and the IIO value
inside the chip_info structure.
Move the calculations for the IIO unit compatibility from inside the
read_{temp,press,humid}() functions and move them to the general
read_raw() function.
In this way, all the data for the calculation of the value are
located in the chip_info structure of the respective sensor.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Acked-by: Adam Rizkalla <ajarizzo@gmail.com>
Link: https://patch.msgid.link/20240628171726.124852-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add LiteOn LTR-308 support into LTR-F216A kernel driver.
The two devices seem to have almost identical register map, except that
the LTR-308 does not have three CLEAR_DATA registers, which are unused
by this driver. Furthermore, LTR-308 and LTR-F216A use different lux
calculation constants, 0.6 and 0.45 respectively. Both differences are
handled using chip info data.
https://optoelectronics.liteon.com/upload/download/DS86-2016-0027/LTR-308ALS_Final_%20DS_V1%201.pdf
https://optoelectronics.liteon.com/upload/download/DS86-2019-0016/LTR-F216A_Final_DS_V1.4.PDF
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20240708114227.18283-2-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document LiteOn LTR-308 support in LTR-F216A bindings.
The two devices seem to have almost identical register map, except that
the LTR-308 does not have three CLEAR_DATA registers, which are unused
by this driver. Furthermore, LTR-308 and LTR-F216A use different lux
calculation constants, 0.6 and 0.45 respectively.
https://optoelectronics.liteon.com/upload/download/DS86-2016-0027/LTR-308ALS_Final_%20DS_V1%201.pdf
https://optoelectronics.liteon.com/upload/download/DS86-2019-0016/LTR-F216A_Final_DS_V1.4.PDF
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240708114227.18283-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ROHM BU27034 light sensor has two data channels for measuring
different frequencies of light. The result from these channels is
combined into Lux value while the raw channel values are reported via
intensity channels.
Both of the intensity channels have adjustable gain setting which
impacts the scale of the raw channels. Eg, doubling the gain will double
the values read from the raw channels, which halves the scale value. The
integration time can also be set for the sensor. This does also have an
impact to the scale of the intensity channels because increasing the
integration time will also increase the values reported via the raw
channels.
Impact of integration time to the scale and the fact that the scale value
does not start from '1', can make it hard for a human reader to compute the
gain values based on the scale.
Add read-only HARDWAREGAIN to help debugging.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/ec349847cc994f3bd632e99b408a31e7c70581d0.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ROHM BU27034NUC was cancelled and BU27034ANUC is replacing this
sensor. The lux computation based on the data from a BU27034ANUC is
different from the computation for the data from an old BU27034NUC.
Fix the lux computation.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/b7bea76b54b28eb354dc523771a0e0a8b6f26095.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ROHM BU27034NUC was cancelled and BU27034ANUC is replacing this
sensor. The BU27034ANUC does not support all the gains or all the
integration times that were supported on BU27034NUC.
Srop unsupported times and gains
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/19f8cca2b5498fbfea6e657b7b9c90b78516866a.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ROHM BU27034NUC was cancelled and BU27034ANUC is replacing this
sensor. The BU27034ANUC does not have the data2 channel.
Drop the data2 channel.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/6f261d4499e9c0e161279717261cc9a20764a6bd.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ROHM BU27034NUC was cancelled and BU27034ANUC is replacing this
sensor. These senors aren't compatible from the software point of view.
According to ROHM, the BU27034NUC was never mass-produced. Hence dropping
the BU27034NUC support and using this driver to support BU27034ANUC
should not be a problem to users. We however need to ensure than people
who use old kernel with the old BU27034NUC driver don't get the old
driver probed for the new sensor.
Prepare to use the BU27034NUC driver to support the new BU27034ANUC and
change the compatible to prevent probing the old driver with the new
sensor.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/ed8b963b0cd3a84c06a494c79969a136d5abcf92.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The BU27034NUC was cancelled before it entered mass production. It was
replaced by a new variant BU27034ANUC (note, added 'A'). The new
variant gained a few significant changes, like removal of the 3.rd data
channel and dropping some of the gain settings. This means that, from
software point of view these ICs are incompatible. Lux calculation based
on the data from the sensors needs to be done differently, and on the
BU27034ANUC the channel 3 data is missing. Also, the gain setting
differencies matter.
Unfortunately, the identification register was not changed so there is no
safe way for the software to distinguish the variants.
According to the ROHM HQ engineers, the old BU27034NUC should not be
encountered in the wild. Hence it makes sense to remove the support for
the old BU27034NUC and add support for the new BU27034ANUC. Change the
compatible in order to not load the incompatible old driver for new sensor
(or, if someone had the old sensor, the new driver for it).
Drop the compatible for old sensor which should not be in the wild and
add a new compatible for the new model with accurate model suffix
'anuc'. Rename the file to match the new compatible.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/c39f9c67b3c07a27d7a13109c7b69cff9cfd2b9b.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The reading of the pressure and humidity value, requires an update of the
t_fine variable which happens by reading the temperature value.
So the bme680_read_{press/humid}() functions of the above sensors are
internally calling the equivalent bme680_read_temp() function in order to
update the t_fine value. By just looking at the code this relation is a
bit hidden and is not easy to understand why those channels are not
independent.
This commit tries to clear these thing a bit by splitting the
bme680_{read/compensate}_{temp/press/humid}() to the following:
i. bme680_read_{temp/press/humid}_adc(): read the raw value from the
sensor.
ii. bme680_calc_t_fine(): calculate the t_fine variable.
iii. bme680_get_t_fine(): get the t_fine variable.
iv. bme680_compensate_{temp/press/humid}(): compensate the adc values and
return the calculated value.
v. bme680_read_{temp/press/humid}(): combine calls of the aforementioned
functions to return the requested value.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-16-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Whenever the sensor is set to forced mode, a TPHG cycle is triggered and
the values of temperature, pressure, humidity and gas become ready to be
read.
The setup of the forced mode to trigger measurements was located inside
the read_{temp/gas}() functions. This was not posing a functional problem
since read_{humid/press}() are internally calling read_temp() so the
forced mode is set through this call.
This is not very clear and it is kind of hidden that regardless of the
measurement, the setup of the forced mode needs to happen before any
measurement.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-15-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There is no need to explicitly configure the gas measurement registers
every time a gas measurement takes place. These are initial configurations
which are written in the beginning and they are not changed throughout
the lifetime of the driver.
If in the future, the device starts to support multiple configuration
profiles with variable heater duration and heater temperature, then they
could become members of the ->read_avail().
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-14-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There are multiple cases in the probe function that dev_err_probe() fits
the needs, so use it.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-13-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Modify the startup procedure to reflect the procedure of the Bosch BME68x
Sensor API. The initial readings and configuration of the sensor need to
happen in the following order:
1) Read calibration data [1,2]
2) Chip general configuration [3]
3) Gas configuration [4]
After the chip configuration it is necessary to ensure that the sensor is
in sleeping mode, in order to apply the gas configuration settings [5].
Also, after the soft reset, it is advised to wait for 5ms [6].
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L162 # [1]
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L44 # [2]
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L53 # [3]
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/examples/forced_mode/forced_mode.c#L60 # [4]
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L640 # [5]
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L294 # [6]
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-12-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In the majority of the error checks after a regmap_{read,write}()
operation the following coding style is used:
ret = regmap_{read,write}(data->regmap, ...);
if (ret < 0) {
dev_err(dev, ...);
return ret;
}
In this particular case it was different so change it for consistency.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-11-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move the buffers that are used in order to read data from the device in
the union which handles all the device read/write buffers. Also create
defines for the number of bytes that are being read from the device and
don't use magic numbers.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-10-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move the IIO device allocation before the actual initialization of the
chip to be more consistent with most IIO drivers and also to have the
ability to use any driver specific data for the chip initialization.
While at it, fix also a misaligned line.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-9-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Calibration data are located in contiguous-ish registers inside the chip.
For that reason we can use bulk reads as is done as well in the BME68x
Sensor API [1].
The arrays that are used for reading the data out of the sensor
are located inside DMA safe buffer.
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L1769 # [1]
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-8-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The LSB of the gas register was read first to check if the following
check was correct and then the MSB+LSB were read together. Simplify this
by reading together the MSB+LSB immediately.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-7-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Sort headers in alphabetical order and split the iio specific functions
with a blank line
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-6-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ACPI ID table was removed with the following 2 commits:
Commit b73d21dccf68 ("iio: bme680_i2c: Remove acpi_device_id table")
Commit f0e4057e97c1 ("iio: bme680_spi: Remove acpi_device_id table")
Remove the remaining ACPI related stuff to this driver since they are
not directly used.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-5-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Delete any redundant casts in the code and use unsigned integers for the
raw adc values.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-4-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix a define typo that instead of BME680_... it is saying BM6880_...
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-3-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add mutexes in the {read/write}_raw() functions of the device to guard the
read/write of data from/to the device. This is necessary because for any
operation other than temperature, multiple reads need to take place from
the device. Even though regmap has a locking by itself, it won't protect us
from multiple applications trying to read at the same time temperature and
pressure since the pressure reading includes an internal temperature
reading and there is nothing to ensure that this temperature+pressure
reading will happen sequentially without any other operation interfering
in the meantime.
Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix description of the filter_mode_available attribute by pointing to
the correct name of the attribute that can be written with valid values.
Fixes: bf92d87d7c67 ("iio:filter:admv8818: Add sysfs ABI documentation")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20240702081851.4663-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
sensor
A SAR sensor from NanjingTianyihexin Electronics Ltd.
The device has the following entry points:
Usual frequency:
- sampling_frequency
Instant reading of current values for different sensors:
- in_proximity0_raw
- in_proximity1_raw
- in_proximity2_raw
- in_proximity3_raw
- in_proximity4_raw
and associated events in events/
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Link: https://patch.msgid.link/20240702-add-tyhx-hx9023s-sensor-driver-v9-3-c030f1801d9b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
A capacitive proximity sensor
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Link: https://patch.msgid.link/20240702-add-tyhx-hx9023s-sensor-driver-v9-2-c030f1801d9b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add vendor prefix for NanjingTianyihexin Electronics Ltd.
http://www.tianyihexin.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Link: https://patch.msgid.link/20240702-add-tyhx-hx9023s-sensor-driver-v9-1-c030f1801d9b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add check for the return value of spi_setup() and return the error
if it fails in order to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20240705084250.3006527-1-nichen@iscas.ac.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Switching to guard simplifies the code and avoids to take care to
unlock the mutex in case of premature return.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The binding's documentation specifies that "As the line is active low, it
should be marked GPIO_ACTIVE_LOW". However, in the driver, it was handled
the opposite way. This commit sets the driver's behaviour in sync with the
documentation
Fixes: 722407a4e8c0 ("staging:iio:ad7606: Use GPIO descriptor API")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
gpiod_set_array_value was misused here: the implementation relied on the
assumption that an unsigned long was required for each gpio, while the
function expects a bit array stored in "as much unsigned long as needed
for storing one bit per GPIO", i.e it is using a bit field.
This leaded to incorrect parameter passed to gpiod_set_array_value, that
would set 1 value instead of 3.
It also prevents to select the software mode correctly for the AD7606B.
Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC")
Fixes: 41f71e5e7daf ("staging: iio: adc: ad7606: Use find_closest() macro")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since the driver supports several parts that present differences in
their layout and behaviour, it is necessary to describe the differences
from one chip to another.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Example uses adi,ad7606-8 as compatible, but adi,sw-mode is not
available for it. So remove this property from example.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add voltage supplies
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Reword a few descriptions, and normalize the text width to 80 characters.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Normalize textwidth to 80 columns on the descriptions.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for new devices:
* Analog Devices AD9652 16-bit 310 MSPS ADC;
* Analog Devices AD9643 14-Bit, 170/210/250 MSPS ADC;
* Analog Devices AD9649 14-bit 20/40/65/80 MSPS ADC.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-5-f1adfee921f7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for new devices:
* Analog Devices AD9652 16-bit 310 MSPS ADC;
* Analog Devices AD9643 14-Bit, 170/210/250 MSPS ADC;
* Analog Devices AD9649 14-bit 20/40/65/80 MSPS ADC.
Note all these parts have subtle differences in their programming model
(different scales, number of channels, etc..) so fallbacks are not
possible.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-4-f1adfee921f7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
If there's only one possible scale, there's no way to change the Vref
select in the device so avoid reading the register in ad9467_get_scale().
In this case, it makes no sense to provide the .read_available()
callback nor allowing for writing the scale attribute.
Note this is in preparation for supporting a new device that only has
one possible scale.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-3-f1adfee921f7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add new variables to the per chip info structure:
* test_points: Number of valid test points for calibration;
* has_dco_invert: Supports inverting DCO (Data clock output) polarity;
* dco_en: Specicic mask to enable DCO delays.
This is in preparation for supporting new parts with subtle differences
in how to configure the hardware.
Note that with the new test_points variable, we also add a new
calib_map_size to 'struct ad9467_state' so we know our map size
depending on how many test points we have and if we can run the
calibration in the inverted state or not.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-2-f1adfee921f7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The calibration process mixes the support for calibrating multiple
channels with only having one channel. Some paths do have 'num_channels'
into account while others don't.
As of now, the driver only supports devices with one channel so the
above is not really a problem. That said, we'll add support for devices
with more than one channel, hence let's properly make the calibration
process to work with it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-1-f1adfee921f7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-5-77114c7e84c5@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-4-77114c7e84c5@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-3-77114c7e84c5@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-2-77114c7e84c5@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-1-77114c7e84c5@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
