| Age | Commit message (Collapse) | Author |
|---|
|
There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.
Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.
Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346
Cc: Marek Maslanka <mmaslanka@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
|
|
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68cc ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Ashok is no longer with Intel and his e-mail address will start bouncing
soon. Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241001170808.203970-1-jithu.joseph@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
|
|
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a94222db ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:
- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup
- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.
- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)
- Various small filesystem connectivitity repair fixes"
* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()
|
|
When multiple FREE_STATEIDs are sent for the same delegation stateid,
it can lead to a possible either use-after-free or counter refcount
underflow errors.
In nfsd4_free_stateid() under the client lock we find a delegation
stateid, however the code drops the lock before calling nfs4_put_stid(),
that allows another FREE_STATE to find the stateid again. The first one
will proceed to then free the stateid which leads to either
use-after-free or decrementing already zeroed counter.
Fixes: 3f29cc82a84c ("nfsd: split sc_status out of sc_type")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Fix Xen config issue introduced in the merge window"
* tag 'for-linus-6.12a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix config option reference in XEN_PRIVCMD definition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix some ext4 bugs and regressions relating to oneline resize and fast
commits"
* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off by one issue in alloc_flex_gd()
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
ext4: use handle to mark fc as ineligible in __track_dentry_update()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Ira Weiny:
- Fix calculation for SBDF in error injection
* tag 'cxl-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
EINJ, CXL: Fix CXL device SBDF calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- Fix potential deadlock during runtime suspend and resume (stm32f7)
* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup"
* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: s3c64xx: fix timeout counters in flush_fifo
spi: atmel-quadspi: Fix wrong register value written to MR
spi: spi-cadence: Fix missing spi_controller_is_target() check
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- gcc plugins: Avoid Kconfig warnings with randstruct (Nathan
Chancellor)
- MAINTAINERS: Add security/Kconfig.hardening to hardening section
(Nathan Chancellor)
- MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
* tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: Add security/Kconfig.hardening to hardening section
hardening: Adjust dependencies in selection of MODVERSIONS
MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm revert from Paul Moore:
"Here is the CONFIG_SECURITY_TOMOYO_LKM revert that we've been
discussing this week. With near unanimous agreement that the original
TOMOYO patches were not the right way to solve the distro problem
Tetsuo is trying the solve, reverting is our best option at this time"
* tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support
|
|
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] <TASK>
[ 19.425448] dump_stack_lvl+0x5d/0x80
[ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.428694] print_report+0x19d/0x52e
[ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.433539] kasan_report+0xf0/0x170
[ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10
[ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common]
[ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360
[ 19.444797] cpuhp_invoke_callback+0x221/0xec0
[ 19.446337] cpuhp_thread_fun+0x21b/0x610
[ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10
[ 19.449354] smpboot_thread_fn+0x2e7/0x6e0
[ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 19.452405] kthread+0x29c/0x350
[ 19.453817] ? __pfx_kthread+0x10/0x10
[ 19.455253] ret_from_fork+0x31/0x70
[ 19.456685] ? __pfx_kthread+0x10/0x10
[ 19.458114] ret_from_fork_asm+0x1a/0x30
[ 19.459573] </TASK>
[ 19.460853]
[ 19.462055] Allocated by task 1198:
[ 19.463410] kasan_save_stack+0x30/0x50
[ 19.464788] kasan_save_track+0x14/0x30
[ 19.466139] __kasan_kmalloc+0xaa/0xb0
[ 19.467465] __kmalloc+0x1cd/0x470
[ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[ 19.471670] do_one_initcall+0xa4/0x380
[ 19.472903] do_init_module+0x238/0x760
[ 19.474105] load_module+0x5239/0x6f00
[ 19.475285] init_module_from_file+0xd1/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.478920] do_syscall_64+0x82/0x160
[ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 19.481292]
[ 19.482205] The buggy address belongs to the object at ffff888829e65000
which belongs to the cache kmalloc-512 of size 512
[ 19.484818] The buggy address is located 0 bytes to the right of
allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[ 19.487447]
[ 19.488328] The buggy address belongs to the physical page:
[ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[ 19.493914] page_type: 0xffffffff()
[ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff
[ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 19.503784] page dumped because: kasan: bad access detected
[ 19.505058]
[ 19.505970] Memory state around the buggy address:
[ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510014] ^
[ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.515367] ==================================================================
The reason for this error is physical_package_ids assigned by VMware VMM
are not continuous and have gaps. This will cause value returned by
topology_physical_package_id() to be more than topology_max_packages().
Here the allocation uses topology_max_packages(). The call to
topology_max_packages() returns maximum logical package ID not physical
ID. Hence use topology_logical_package_id() instead of
topology_physical_package_id().
Fixes: 9a1aac8a96dc ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering")
Cc: stable@vger.kernel.org
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zach Wade <zachwade.k@gmail.com>
Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
|
|
Initially it was thought that we just wanted to ignore errors from
logged op replay, but it turns out we do need to catch -EROFS, or we'll
go into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
These shouldn't always be fatal errors - logged op resume, in
particular, and we want it as a parameter there.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It was initially believed that it would be better to be explicit about
the snapshot we're updating when writing inodes in fsck; however, it
turns out that passing around the snapshot separately is more error
prone and we're usually updating the inode in the same snapshow we read
it from.
This is different from normal filesystem paths, where we do the update
in the snapshot of the subvolume we're in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We want to check for this early so it can be reattached if necessary in
check_unreachable_inodes(); better than letting it be deleted and having
the children reattached, losing their filenames.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
link count works differently in bcachefs - it's only nonzero for files
with multiple hardlinks, which means we can also avoid checking it
except for files that are known to have hardlinks.
That means we need a few different checks instead; in particular, we
don't want fsck to delet a file that has a dirent pointing to it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's legal for regular files to have missing backpointers (due to
hardlinks), and fsck should automatically add them, but for directories
this is an error that should be flagged.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The fragmentation_lru field hasn't been needed since we reworked the LRU
btrees to use the btree write buffer; previously it was used to resolve
collisions, but the revised LRU btree uses the backpointer (the bucket)
as part of the key.
It should have been deleted at the time of the LRU rework; since it
wasn't, that left places for bugs to hide, in check/repair.
This fixes LRU fsck on a filesystem image helpfully provided by a user
who disappeared before I could get his name for the reported-by.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
check_lru_key() wasn't using write buffer updates for deleting bad lru
entries - dating from before the lru btree used the btree write buffer.
And when possibly flushing the btree write buffer (to make sure we're
seeing a real inconsistency), we need to be using the modern
bch2_btree_write_buffer_maybe_flush().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Errors are getting marked as AUTOFIX once they've been (re)-tested and
audited.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Newly generated keys, in the transaction commit path or write path,
should not be AUTOFIX; those indicate bugs that we need to fail fast
for.
Fixes: 5612daafb764 ("bcachefs: Fix fsck warnings from bkey validation")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Ensure a copy of the lost+found inode exists in the snapshot that we're
reattaching, so that we don't trigger warnings in
lookup_inode_for_snapshot() later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes two different bugs:
- Looser locking with the rhashtable means we need to recheck if the
inode is still hashed after prepare_to_wait(), and add a corresponding
wakeup after removing from the hash table.
- da18ecbf0fb6 ("fs: add i_state helpers") changed the bit waitqueues
used for inodes, and bcachefs wasn't updated and thus broke; this
updates bcachefs to the new helper.
Fixes: 112d21fd1a12 ("bcachefs: switch to rhashtable for vfs inodes hash")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If phy_read_mmd() fails, the error code stored in 'bmsr' should be returned
instead of 'val' which is likely to be 0.
Fixes: 75f4d8d10e01 ("net: phy: add Broadcom BCM84881 PHY driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/3e1755b0c40340d00e089d6adae5bca2f8c79e53.1727982168.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list.
Fixes: b8273570f802 ("genetlink: fix netns vs. netlink table locking (2)")
Cc: stable@vger.kernel.org
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241003104431.12391-1-a.kovaleva@yadro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wesley reported an issue:
==================================================================
EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks
------------[ cut here ]------------
kernel BUG at fs/ext4/resize.c:324!
CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27
RIP: 0010:ext4_resize_fs+0x1212/0x12d0
Call Trace:
__ext4_ioctl+0x4e0/0x1800
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0x99/0xd0
x64_sys_call+0x1206/0x20d0
do_syscall_64+0x72/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
While reviewing the patch, Honza found that when adjusting resize_bg in
alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than
flexbg_size.
The reproduction of the problem requires the following:
o_group = flexbg_size * 2 * n;
o_size = (o_group + 1) * group_size;
n_group: [o_group + flexbg_size, o_group + flexbg_size * 2)
o_size = (n_group + 1) * group_size;
Take n=0,flexbg_size=16 as an example:
last:15
|o---------------|--------------n-|
o_group:0 resize to n_group:30
The corresponding reproducer is:
img=test.img
rm -f $img
truncate -s 600M $img
mkfs.ext4 -F $img -b 1024 -G 16 8M
dev=`losetup -f --show $img`
mkdir -p /tmp/test
mount $dev /tmp/test
resize2fs $dev 248M
Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE()
to prevent the issue from happening again.
[ Note: another reproucer which this commit fixes is:
img=test.img
rm -f $img
truncate -s 25MiB $img
mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img
truncate -s 3GiB $img
dev=`losetup -f --show $img`
mkdir -p /tmp/test
mount $dev /tmp/test
resize2fs $dev 3G
umount $dev
losetup -d $dev
-- TYT ]
Reported-by: Wesley Hershberger <wesley.hershberger@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2081231
Reported-by: Stéphane Graber <stgraber@stgraber.org>
Closes: https://lore.kernel.org/all/20240925143325.518508-1-aleksandr.mikhalitsyn@canonical.com/
Tested-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Tested-by: Eric Sandeen <sandeen@redhat.com>
Fixes: 665d3e0af4d3 ("ext4: reduce unnecessary memory allocation in alloc_flex_gd()")
Cc: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240927133329.1015041-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch moves the call to this function so that an handle
can be used. If a transaction fails to start, then there's not point in
trying to mark the filesystem as ineligible, and an error will eventually be
returned to user-space.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240923104909.18342-3-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch fixes the calls to this function in
__track_dentry_update() by adding an extra parameter to the callback used in
ext4_fc_track_template().
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240923104909.18342-2-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Commit 4e0a1d8b0675
("Bluetooth: btusb: Don't suspend when there are connections")
introduces a check for connections to prevent auto-suspend but that
actually ignored the fact the .suspend callback can be called for
external suspend requests which
Documentation/driver-api/usb/power-management.rst states the following:
'External suspend calls should never be allowed to fail in this way,
only autosuspend calls. The driver can tell them apart by applying
the :c:func:`PMSG_IS_AUTO` macro to the message argument to the
``suspend`` method; it will return True for internal PM events
(autosuspend) and False for external PM events.'
In addition to that align system suspend with USB suspend by using
hci_suspend_dev since otherwise the stack would be expecting events
such as advertising reports which may not be delivered while the
transport is suspended.
Fixes: 4e0a1d8b0675 ("Bluetooth: btusb: Don't suspend when there are connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
|
|
This checks if the ACL connection remains valid as it could be destroyed
while hci_enhanced_setup_sync is pending on cmd_sync leading to the
following trace:
BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60
Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37
CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? hci_enhanced_setup_sync+0x91b/0xa60
print_report+0x152/0x4c0
? hci_enhanced_setup_sync+0x91b/0xa60
? __virt_addr_valid+0x1fa/0x420
? hci_enhanced_setup_sync+0x91b/0xa60
kasan_report+0xda/0x1b0
? hci_enhanced_setup_sync+0x91b/0xa60
hci_enhanced_setup_sync+0x91b/0xa60
? __pfx_hci_enhanced_setup_sync+0x10/0x10
? __pfx___mutex_lock+0x10/0x10
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? assign_work+0x167/0x240
worker_thread+0x5b7/0xf60
? __kthread_parkme+0xac/0x1c0
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x293/0x360
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 34:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__hci_conn_add+0x187/0x17d0
hci_connect_sco+0x2e1/0xb90
sco_sock_connect+0x2a2/0xb80
__sys_connect+0x227/0x2a0
__x64_sys_connect+0x6d/0xb0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 37:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x101/0x160
kfree+0xd0/0x250
device_release+0x9a/0x210
kobject_put+0x151/0x280
hci_conn_del+0x448/0xbf0
hci_abort_conn_sync+0x46f/0x980
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
worker_thread+0x5b7/0xf60
kthread+0x293/0x360
ret_from_fork+0x2f/0x70
ret_from_fork_asm+0x1a/0x30
Cc: stable@vger.kernel.org
Fixes: e07a06b4eb41 ("Bluetooth: Convert SCO configure_datapath to hci_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
rfcomm_sk_state_change attempts to use sock_lock so it must never be
called with it locked but rfcomm_sock_ioctl always attempt to lock it
causing the following trace:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted
------------------------------------------------------
syz-executor386/5093 is trying to acquire lock:
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline]
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73
but task is already holding lock:
ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491
Reported-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com
Tested-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218
Fixes: 3241ad820dbb ("[Bluetooth] Add timestamp support to L2CAP, RFCOMM and SCO")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
PSE controllers like the TPS23881 can forcefully turn off their
configuration state. In such cases, the is_enabled() and get_status()
callbacks will report the PSE as disabled, while admin_state_enabled
will show it as enabled. This mismatch can lead the user to attempt
to enable it, but no action is taken as admin_state_enabled remains set.
The solution is to disable the PSE before enabling it, ensuring the
actual status matches admin_state_enabled.
Fixes: d83e13761d5b ("net: pse-pd: Use regulator framework within PSE framework")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241002121706.246143-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the second bridge command overwrites the first one.
Fix this by adding this VID to the interface behind $swp2.
The one_bridge_two_pvids() test intends to check that there is no
leakage of traffic between bridge ports which have a single VLAN - the
PVID VLAN.
Because of a typo, port $swp1 is configured with a PVID twice (second
command overwrites first), and $swp2 isn't configured at all (and since
the bridge vlan_default_pvid property is set to 0, this port will not
have a PVID at all, so it will drop all untagged and priority-tagged
traffic).
So, instead of testing the configuration that was intended, we are
testing a different one, where one port has PVID 2 and the other has
no PVID. This incorrect version of the test should also pass, but is
ineffective for its purpose, so fix the typo.
This typo has an impact on results of the test,
potentially leading to wrong conclusions regarding
the functionality of a network device.
The tests results:
TEST: Switch ports in VLAN-aware bridge with different PVIDs:
Unicast non-IP untagged [ OK ]
Multicast non-IP untagged [ OK ]
Broadcast non-IP untagged [ OK ]
Unicast IPv4 untagged [ OK ]
Multicast IPv4 untagged [ OK ]
Unicast IPv6 untagged [ OK ]
Multicast IPv6 untagged [ OK ]
Unicast non-IP VID 1 [ OK ]
Multicast non-IP VID 1 [ OK ]
Broadcast non-IP VID 1 [ OK ]
Unicast IPv4 VID 1 [ OK ]
Multicast IPv4 VID 1 [ OK ]
Unicast IPv6 VID 1 [ OK ]
Multicast IPv6 VID 1 [ OK ]
Unicast non-IP VID 4094 [ OK ]
Multicast non-IP VID 4094 [ OK ]
Broadcast non-IP VID 4094 [ OK ]
Unicast IPv4 VID 4094 [ OK ]
Multicast IPv4 VID 4094 [ OK ]
Unicast IPv6 VID 4094 [ OK ]
Multicast IPv6 VID 4094 [ OK ]
Fixes: 476a4f05d9b8 ("selftests: forwarding: add a no_forwarding.sh test")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kacper Ludwinski <kac.ludwinski@icloud.com>
Link: https://patch.msgid.link/20241002051016.849-1-kac.ludwinski@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
568894edbe48 ("sched_ext: Add scx_cgroup_enabled to gate cgroup operations
and fix scx_tg_online()") assumed that scx_cgroup_exit() is only called
after scx_cgroup_init() finished successfully. This isn't true.
scx_cgroup_exit() can be called without scx_cgroup_init() being called at
all or after scx_cgroup_init() failed in the middle.
As init state is tracked per cgroup, scx_cgroup_exit() can be used safely to
clean up in all cases. Remove the incorrect WARN_ON_ONCE().
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 568894edbe48 ("sched_ext: Add scx_cgroup_enabled to gate cgroup operations and fix scx_tg_online()")
|
|
When the BPF scheduler fails, ops.exit() allows rich error reporting through
scx_exit_info. Use scx.exit() path consistently for all failures which can
be caused by the BPF scheduler:
- scx_ops_error() is called after ops.init() and ops.cgroup_init() failure
to record error information.
- ops.init_task() failure now uses scx_ops_error() instead of pr_err().
- The err_disable path updated to automatically trigger scx_ops_error() to
cover cases that the error message hasn't already been generated and
always return 0 indicating init success so that the error is reported
through ops.exit().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>
Cc: Daniel Hodges <hodges.daniel.scott@gmail.com>
Cc: Changwoo Min <multics69@gmail.com>
Cc: Andrea Righi <andrea.righi@linux.dev>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"A couple of build/config issues and expanding the speculative SSBS
workaround to more CPUs:
- Expand the speculative SSBS workaround to cover Cortex-A715,
Neoverse-N3 and Microsoft Azure Cobalt 100
- Force position-independent veneers - in some kernel configurations,
the LLD linker generates position-dependent veneers for otherwise
position-independent code, resulting in early boot-time failures
- Fix Kconfig selection of HAVE_DYNAMIC_FTRACE_WITH_ARGS so that it
is not enabled when not supported by the combination of clang and
GNU ld"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Subscribe Microsoft Azure Cobalt 100 to erratum 3194386
arm64: fix selection of HAVE_DYNAMIC_FTRACE_WITH_ARGS
arm64: errata: Expand speculative SSBS workaround once more
arm64: cputype: Add Neoverse-N3 definitions
arm64: Force position-independent veneers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- PERF_TYPE_BREAKPOINT now returns -EOPNOTSUPP instead of -ENOENT,
which aligns to other ports and is a saner value
- The KASAN-related stack size increasing logic has been moved to a C
header, to avoid dependency issues
* tag 'riscv-for-linus-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix kernel stack size when KASAN is enabled
drivers/perf: riscv: Align errno for unsupported perf event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix tp_printk command line option crashing the kernel
With the code that can handle a buffer from a previous boot, the
trace_check_vprintf() needed access to the delta of the address space
used by the old buffer and the current buffer. To do so, the
trace_array (tr) parameter was used. But when tp_printk is enabled on
the kernel command line, no trace buffer is used and the trace event
is sent directly to printk(). That meant the tr field of the iterator
descriptor was NULL, and since tp_printk still uses
trace_check_vprintf() it caused a NULL dereference.
- Add ptrace.h include to x86 ftrace file for completeness
- Fix rtla installation when done with out-of-tree build
- Fix the help messages in rtla that were incorrect
- Several fixes to fix races with the timerlat and hwlat code
Several locking issues were discovered with the coordination between
timerlat kthread creation and hotplug. As timerlat has callbacks from
hotplug code to start kthreads when CPUs come online. There are also
locking issues with grabbing the cpu_read_lock() and the locks within
timerlat.
* tag 'trace-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Fix a race during cpuhp processing
tracing/timerlat: Fix a race during cpuhp processing
tracing/timerlat: Drop interface_lock in stop_kthread()
tracing/timerlat: Fix duplicated kthread creation due to CPU online/offline
x86/ftrace: Include <asm/ptrace.h>
rtla: Fix the help text in osnoise and timerlat top tools
tools/rtla: Fix installation from out-of-tree build
tracing: Fix trace_check_vprintf() when tp_printk is used
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
"Fixes for issues introduced in this merge window: kobject memory leak,
unsupressed warning and possible lockup in new slub_kunit tests,
misleading code in kvfree_rcu_queue_batch()"
* tag 'slab-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slub/kunit: skip test_kfree_rcu when the slub kunit test is built-in
mm, slab: suppress warnings in test_leak_destroy kunit test
rcu/kvfree: Refactor kvfree_rcu_queue_batch()
mm, slab: fix use of SLAB_SUPPORTS_SYSFS in kmem_cache_release()
|
|
Nick Child says:
====================
ibmvnic: Fix for send scrq direct
This is a v2 of a patchset (now just patch) which addresses a
bug in a new feature which is causing major link UP issues with
certain physical cards.
For a full summary of the issue:
1. During vnic initialization we get the following values from vnic
server regarding "Transmit / Receive Descriptor Requirement" (see
PAPR Table 584. CAPABILITIES Commands):
- LSO Tx frame = 0x0F , header offsets + L2, L3, L4 headers required
- CSO Tx frame = 0x0C , header offsets + L2 header required
- standard frame = 0x0C , header offsets + L2 header required
2. Assume we are dealing with only "standard frames" from now on (no
CSO, no LSO)
3. When using 100G backing device, we don't hand vnic server any header
information and TX is successful
4. When using 25G backing device, we don't hand vnic server any header
information and TX fails and we get "Adapter Error" transport events.
The obvious issue here is that vnic client should be respecting the 0X0C
header requirement for standard frames. But 100G cards will also give
0x0C despite the fact that we know TX works if we ignore it. That being
said, we still must respect values given from the managing server. Will
need to work with them going forward to hopefully get 100G cards to
return 0x00 for this bitstring so the performance gains of using
send_subcrq_direct can be continued.
====================
Link: https://patch.msgid.link/20241001163200.1802522-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, the TX header requirement for standard frames was ignored.
This requirement is a bitstring sent from the VIOS which maps to the
type of header information needed during TX. If no header information,
is needed then send subcrq direct can be used (which can be more
performant).
This bitstring was previously ignored for standard packets (AKA non LSO,
non CSO) due to the belief that the bitstring was over-cautionary. It
turns out that there are some configurations where the backing device
does need header information for transmission of standard packets. If
the information is not supplied then this causes continuous "Adapter
error" transport events. Therefore, this bitstring should be respected
and observed before considering the use of send subcrq direct.
Fixes: 74839f7a8268 ("ibmvnic: Introduce send sub-crq direct")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001163200.1802522-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix up the ACPI IRQ override quirk list and add two new entries
to it, add a new quirk to the ACPI backlight (video) driver, and fix
the ACPI battery driver.
Specifics:
- Add a quirk for Dell OptiPlex 5480 AIO to the ACPI backlight
(video) driver (Hans de Goede)
- Prevent the ACPI battery driver from crashing when unregistering a
battery hook and simplify battery hook locking in it (Armin Wolf)
- Fix up the ACPI IRQ override quirk list and add quirks for Asus
Vivobook X1704VAP and Asus ExpertBook B2502CVA to it (Hans de
Goede)"
* tag 'acpi-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: battery: Fix possible crash when unregistering a battery hook
ACPI: battery: Simplify battery hook locking
ACPI: video: Add backlight=native quirk for Dell OptiPlex 5480 AIO
ACPI: resource: Add Asus ExpertBook B2502CVA to irq1_level_low_skip_override[]
ACPI: resource: Add Asus Vivobook X1704VAP to irq1_level_low_skip_override[]
ACPI: resource: Loosen the Asus E1404GAB DMI match to also cover the E1404GA
ACPI: resource: Remove duplicate Asus E1504GAB IRQ override
|
