| Age | Commit message (Collapse) | Author |
|---|
|
AF reserves MCAM entries for each PF, VF present in the
system and populates the entry with DMAC and action with
default RSS so that basic packet I/O works. Since PF/VF is
not aware of the RSS action installed by AF, AF only fixup
the actions of the rules installed by PF/VF with corresponding
default RSS action. This worked well for rules installed by
PF/VF for features like RX VLAN offload and DMAC filters but
rules involving action like drop/forward to queue are also
getting modified by AF. Hence fix it by setting the default
RSS action only if requested by PF/VF.
Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.8, take #3
- Check for the validity of interrupts handled by a MOVALL
command
- Check for the validity of interrupts while reading the
pending state on enabling LPIs.
|
|
It is possible that an LPI mapped in a different ITS gets unmapped while
handling the MOVALL command. If that is the case, there is no state that
can be migrated to the destination. Silently ignore it and continue
migrating other LPIs.
Cc: stable@vger.kernel.org
Fixes: ff9c114394aa ("KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240221092732.4126848-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vgic_get_irq() may not return a valid descriptor if there is no ITS that
holds a valid translation for the specified INTID. If that is the case,
it is safe to silently ignore it and continue processing the LPI pending
table.
Cc: stable@vger.kernel.org
Fixes: 33d3bc9556a7 ("KVM: arm64: vgic-its: Read initial LPI pending table")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240221092732.4126848-2-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Mostly irdma and bnxt_re fixes:
- Missing error unwind in hf1
- For bnxt - fix fenching behavior to work on new chips, fail
unsupported SRQ resize back to userspace, propogate SRQ FW failure
back to userspace.
- Correctly fail unsupported SRQ resize back to userspace in bnxt
- Adjust a memcpy in mlx5 to not overflow a struct field.
- Prevent userspace from triggering mlx5 fw syndrome logging from
sysfs
- Use the correct access mode for MLX5_IB_METHOD_DEVX_OBJ_MODIFY to
avoid a userspace failure on modify
- For irdma - Don't UAF a concurrent tasklet during destroy, prevent
userspace from issuing invalid QP attrs, fix a possible CQ
overflow, capture a missing HW async error event
- sendmsg() triggerable memory access crash in hfi1
- Fix the srpt_service_guid parameter to not crash due to missing
function pointer
- Don't leak objects in error unwind in qedr
- Don't weirdly cast function pointers in srpt"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srpt: fix function pointer cast warnings
RDMA/qedr: Fix qedr_create_user_qp error flow
RDMA/srpt: Support specifying the srpt_service_guid parameter
IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
RDMA/irdma: Add AE for too many RNRS
RDMA/irdma: Set the CQ read threshold for GEN 1
RDMA/irdma: Validate max_send_wr and max_recv_wr
RDMA/irdma: Fix KASAN issue with tasklet
RDMA/mlx5: Relax DEVX access upon modify commands
IB/mlx5: Don't expose debugfs entries for RRoCE general parameters if not supported
RDMA/mlx5: Fix fortify source warning while accessing Eth segment
RDMA/bnxt_re: Add a missing check in bnxt_qplib_query_srq
RDMA/bnxt_re: Return error for SRQ resize
RDMA/bnxt_re: Fix unconditional fence for newer adapters
RDMA/bnxt_re: Remove a redundant check inside bnxt_re_vf_res_config
RDMA/bnxt_re: Avoid creating fence MR for newer adapters
IB/hfi1: Fix a memleak in init_credit_return
|
|
Guenter Roeck reports that commit a64056bb5a32 ("drm/tests/drm_buddy:
add alloc_contiguous test") causes build failures on 32-bit targets:
"This patch breaks the build on all 32-bit systems since it introduces
an unhandled direct 64-bit divide operation.
ERROR: modpost: "__umoddi3" [drivers/gpu/drm/tests/drm_buddy_test.ko] undefined!
ERROR: modpost: "__moddi3" [drivers/gpu/drm/tests/drm_buddy_test.ko] undefined!"
and the uses of 'u64' are all entirely pointless. Yes, the arguments to
drm_buddy_init() and drm_buddy_alloc_blocks() are in fact of type 'u64',
but none of the values here are remotely relevant, and the compiler will
happily just do the type expansion.
Of course, in a perfect world the compiler would also have just noticed
that all the values in question are tiny, and range analysis would have
shown that doing a 64-bit divide is pointless, but that is admittedly
expecting a fair amount of the compiler.
IOW, we shouldn't write code that the compiler then has to notice is
unnecessarily complicated just to avoid extra work. We do have fairly
high expectations of compilers, but kernel code should be reasonable to
begin with.
It turns out that there are also other issues with this code: the KUnit
assertion messages have incorrect types in the format strings, but
that's a widely spread issue caused by the KUnit infrastructure not
having enabled format string verification. We'll get that sorted out
separately.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: a64056bb5a32 ("drm/tests/drm_buddy: add alloc_contiguous test")
Link: https://lore.kernel.org/all/538327ff-8d34-41d5-a9ae-1a334744f5ae@roeck-us.net/
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On some systems, sys_membarrier can be very expensive, causing overall
slowdowns for everything. So put a lock on the path in order to
serialize the accesses to prevent the ability for this to be called at
too high of a frequency and saturate the machine.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-and-tested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Fixes: 22e4ebb97582 ("membarrier: Provide expedited private command")
Fixes: c5f58bd58f43 ("membarrier: Provide GLOBAL_EXPEDITED command")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Randomly a Lenovo Z13 will trigger a kernel warning traceback from this
condition:
```
if (WARN_ON((profile < 0) || (profile >= ARRAY_SIZE(profile_names))))
```
This happens because thinkpad-acpi always assumes that
convert_dytc_to_profile() successfully updated the profile. On the
contrary a condition can occur that when dytc_profile_refresh() is called
the profile doesn't get updated as there is a -EOPNOTSUPP branch.
Catch this situation and avoid updating the profile. Also log this into
dynamic debugging in case any other modes should be added in the future.
Fixes: c3bfcd4c6762 ("platform/x86: thinkpad_acpi: Add platform profile support")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217022311.113879-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Commit 14c200b7ca46 ("platform/x86: intel-vbtn: Fix missing
tablet-mode-switch events") causes 2 issues on the ThinkPad X1 Tablet Gen2:
1. The ThinkPad will wake up immediately from suspend
2. When put in tablet mode SW_TABLET_MODE reverts to 0 after about 1 second
Both these issues are caused by the "VBDL" ACPI method call added
at the end of the notify_handler.
And it never became entirely clear if this call is even necessary to fix
the issue of missing tablet-mode-switch events on the Dell Inspiron 7352.
Drop the "VBDL" ACPI method call again to fix the 2 issues this is
causing on the ThinkPad X1 Tablet Gen2.
Fixes: 14c200b7ca46 ("platform/x86: intel-vbtn: Fix missing tablet-mode-switch events")
Reported-by: Alexander Kobel <a-kobel@a-kobel.de>
Closes: https://lore.kernel.org/platform-driver-x86/295984ce-bd4b-49bd-adc5-ffe7c898d7f0@a-kobel.de/
Cc: regressions@lists.linux.dev
Cc: Arnold Gozum <arngozum@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/20240216203300.245826-1-hdegoede@redhat.com
|
|
The Acer B1 750 tablet used a Novatek NVT-ts touchscreen,
not a Goodix touchscreen.
Rename acer_b1_750_goodix_gpios to acer_b1_750_nvt_ts_gpios
to correctly reflect this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-5-hdegoede@redhat.com
|
|
After commit b286f4e87e32 ("serial: core: Move tty and serdev to be
children of serial core port device") x86_instantiate_serdev() no longer
works due to the serdev-controller-device moving in the device hierarchy
from (e.g.) /sys/devices/pci0000:00/8086228A:00/serial0 to
/sys/devices/pci0000:00/8086228A:00/8086228A:00:0/8086228A:00:0.0/serial0
Use the new get_serdev_controller() helper function to fix this.
Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-4-hdegoede@redhat.com
|
|
In some cases UART attached devices which require an in kernel driver,
e.g. UART attached Bluetooth HCIs are described in the ACPI tables
by an ACPI device with a broken or missing UartSerialBusV2() resource.
This causes the kernel to create a /dev/ttyS# char-device for the UART
instead of creating an in kernel serdev-controller + serdev-device pair
for the in kernel driver.
The quirk handling in acpi_quirk_skip_serdev_enumeration() makes the kernel
create a serdev-controller device for these UARTs instead of a /dev/ttyS#.
Instantiating the actual serdev-device to bind to is up to pdx86 code,
so far this was handled by the x86-android-tablets code. But since
commit b286f4e87e32 ("serial: core: Move tty and serdev to be children of
serial core port device") the serdev-controller device has moved in the
device hierarchy from (e.g.) /sys/devices/pci0000:00/8086228A:00/serial0 to
/sys/devices/pci0000:00/8086228A:00/8086228A:00:0/8086228A:00:0.0/serial0 .
This makes this a bit trickier to do and another driver is in the works
which will also need this functionality.
Add a new helper to get the serdev-controller device, so that the new
code for this can be shared.
Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-3-hdegoede@redhat.com
|
|
Yogabook1 X90
After commit 4014ae236b1d ("platform/x86: x86-android-tablets: Stop using
gpiolib private APIs") the touchscreen in the keyboard half of
the Lenovo Yogabook1 X90 stopped working with the following error:
Goodix-TS i2c-goodix_ts: error -EBUSY: Failed to get irq GPIO
The problem is that when getting the IRQ for instantiated i2c_client-s
from a GPIO (rather then using an IRQ directly from the IOAPIC),
x86_acpi_irq_helper_get() now properly requests the GPIO, which disallows
other drivers from requesting it. Normally this is a good thing, but
the goodix touchscreen also uses the IRQ as an output during reset
to select which of its 2 possible I2C addresses should be used.
Add a new free_gpio flag to struct x86_acpi_irq_data to deal with this
and release the GPIO after getting the IRQ in this special case.
Fixes: 4014ae236b1d ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-2-hdegoede@redhat.com
|
|
Netronome graciously transferred the original NIPA repo
to our new netdev umbrella org. Link to that instead of
my private fork.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240216161945.2208842-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzkaller reported an overflown write in arp_req_get(). [0]
When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour
entry and copies neigh->ha to struct arpreq.arp_ha.sa_data.
The arp_ha here is struct sockaddr, not struct sockaddr_storage, so
the sa_data buffer is just 14 bytes.
In the splat below, 2 bytes are overflown to the next int field,
arp_flags. We initialise the field just after the memcpy(), so it's
not a problem.
However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN),
arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL)
in arp_ioctl() before calling arp_req_get().
To avoid the overflow, let's limit the max length of memcpy().
Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible
array in struct sockaddr") just silenced syzkaller.
[0]:
memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14)
WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128
Modules linked in:
CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014
RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128
Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6
RSP: 0018:ffffc900050b7998 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001
RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000
R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010
FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261
inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981
sock_do_ioctl+0xdf/0x260 net/socket.c:1204
sock_ioctl+0x3ef/0x650 net/socket.c:1321
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x64/0xce
RIP: 0033:0x7f172b262b8d
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d
RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003
RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000
</TASK>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Bjoern Doebel <doebel@amazon.de>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240215230516.31330-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Make an unregister in case of unsuccessful registration.
Fixes: 687125b5799c ("devlink: split out core code")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215203400.29976-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Fixes: 915d7e5e5930 ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215202717.29815-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The max length of volume->vid value is 20 characters.
So increase idbuf[] size up to 24 to avoid overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240211150442.3416-1-d.dulov@aladdin.ru/ # v1
Link: https://lore.kernel.org/r/20240212083347.10742-1-d.dulov@aladdin.ru/ # v2
Link: https://lore.kernel.org/r/20240219143906.138346-3-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When searching for a matching peer, all addresses need to be searched,
not just the ipv6 ones in the fs_addresses6 list.
Given that the lists no longer contain addresses, there is little
reason to splitting things between separate lists, so unify them
into a single list.
When processing an incoming callback from an ipv4 address, this would
lead to a failure to set call->server, resulting in the callback being
ignored and the client seeing stale contents.
Fixes: 72904d7b9bfb ("rxrpc, afs: Allow afs to pin rxrpc_peer objects")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008035.html
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008037.html # v1
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008066.html # v2
Link: https://lore.kernel.org/r/20240219143906.138346-2-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The following memory leak was reported after unbinding /dev/cachefiles:
==================================================================
unreferenced object 0xffff9b674176e3c0 (size 192):
comm "cachefilesd2", pid 680, jiffies 4294881224
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc ea38a44b):
[<ffffffff8eb8a1a5>] kmem_cache_alloc+0x2d5/0x370
[<ffffffff8e917f86>] prepare_creds+0x26/0x2e0
[<ffffffffc002eeef>] cachefiles_determine_cache_security+0x1f/0x120
[<ffffffffc00243ec>] cachefiles_add_cache+0x13c/0x3a0
[<ffffffffc0025216>] cachefiles_daemon_write+0x146/0x1c0
[<ffffffff8ebc4a3b>] vfs_write+0xcb/0x520
[<ffffffff8ebc5069>] ksys_write+0x69/0xf0
[<ffffffff8f6d4662>] do_syscall_64+0x72/0x140
[<ffffffff8f8000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
==================================================================
Put the reference count of cache_cred in cachefiles_daemon_unbind() to
fix the problem. And also put cache_cred in cachefiles_add_cache() error
branch to avoid memory leaks.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
CC: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240217081431.796809-1-libaokun1@huawei.com
Acked-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The debugfs `update_policy` file is created before
amd_pmf_start_policy_engine() has completed, and thus there could be
a possible (albeit unlikely) race between sideloading a policy and the
BIOS policy getting setup.
Move the debugfs file creation after all BIOS policy is setup.
Fixes: 10817f28e533 ("platform/x86/amd/pmf: Add capability to sideload of policy binary")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://lore.kernel.org/platform-driver-x86/15df7d02-b0aa-457a-954a-9d280a592843@redhat.com/T/#m2c445f135e5ef9b53184be7fc9df84e15f89d4d9
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217015642.113806-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
amd_pmf_init_smart_pc() calls out to amd_pmf_get_bios_buffer() but
the error handling flow doesn't clean everything up allocated
memory.
As amd_pmf_get_bios_buffer() is only called by amd_pmf_init_smart_pc(),
fold it into the function and add labels to clean up any step that
can fail along the way. Explicitly set everything allocated to NULL as
there are other features that may access some of the same variables.
Fixes: 7c45534afa44 ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217014107.113749-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
If a machine advertises Smart PC support but is missing policy data
show a debugging message to help clarify why Smart PC wasn't enabled.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217014107.113749-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The buffer is cleared in the suspend handler but used in
the delayed work for amd_pmf_get_metrics().
Stop clearing it to fix the hang.
Reported-by: Trolli Schmittlauch <t.schmittlauch@orlives.de>
Closes: https://lore.kernel.org/regressions/ed2226ff-257b-4cfd-afd6-bf3be9785474@localhost/
Closes: https://community.frame.work/t/kernel-6-8-rc-system-freezes-after-resuming-from-suspend-reproducers-wanted/45381
Fixes: 2b3a7f06caaf ("platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr()")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217005216.113408-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
TEE enact command failures are seen after each suspend/resume cycle;
fix this by cancelling the policy builder workqueue before going into
suspend and reschedule the workqueue after resume.
[ 629.516792] ccp 0000:c2:00.2: tee: command 0x5 timed out, disabling PSP
[ 629.516835] amd-pmf AMDI0102:00: TEE enact cmd failed. err: ffff000e, ret:0
[ 630.550464] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_RESPONSE:1
[ 630.550511] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_ARGUMENT:7
[ 630.550548] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_MESSAGE:16
Fixes: ae82cef7d9c5 ("platform/x86/amd/pmf: Add support for PMF-TA interaction")
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240216064112.962582-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Improve code readability by removing smart_pc_status enum, as the same
can be done with a simple true/false check; Update the code checks
accordingly.
Also add a missing return on amd_pmf_init_smart_pc() success,
to skip trying to setup the auto / slider modes which should
not be used in this case.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240216064112.962582-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Now that prefix matches for ACPI names are supported, the ts_dmi_data
structs for "GDIX1001:00" and "GDIX1001:01" can be consolidated into
a single match matching on "GDIX1001".
For consistency also change gdix1002_00_upside_down_data to match.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212120608.30469-2-hdegoede@redhat.com
|
|
On some devices the ACPI name of the touchscreen is e.g. either
MSSL1680:00 or MSSL1680:01 depending on the BIOS version.
This happens for example on the "Chuwi Hi8 Air" tablet where the initial
commit's ts_data uses "MSSL1680:00" but the tablets from the github issue
and linux-hardware.org probe linked below both use "MSSL1680:01".
Replace the strcmp() match on ts_data->acpi_name with a strstarts()
check to allow using a partial match on just the ACPI HID of "MSSL1680"
and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly
to fix the touchscreen not working on models where it is "MSSL1680:01".
Note this drops the length check for I2C_NAME_SIZE. This never was
necessary since the ACPI names used are never more then 11 chars and
I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long
before reaching I2C_NAME_SIZE.
Link: https://linux-hardware.org/?computer=AC4301C0542A
Fixes: bbb97d728f77 ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet")
Closes: https://github.com/onitake/gsl-firmware/issues/91
Cc: stable@vger.kernel.org
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com
|
|
Since commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler
for SCI") the ACPI OSL code passes IRQF_ONESHOT when requesting the SCI.
Since the INT0002 GPIO is typically shared with the ACPI SCI the INT0002
driver must pass the same flags.
This fixes the INT0002 driver failing to probe due to following error +
as well as removing the backtrace that follows this error:
"genirq: Flags mismatch irq 9. 00000084 (INT0002) vs. 00002080 (acpi)"
Fixes: 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210110149.12803-1-hdegoede@redhat.com
|
|
The Lenovo workstations require the password opcode to be run before
the attribute value is changed (if Admin password is enabled).
Tested on some Thinkpads to confirm they are OK with this order too.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 640a5fa50a42 ("platform/x86: think-lmi: Opcode support")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240209152359.528919-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Incorporate a test case to assess the handling of invalid flags or
task__nullable parameters passed to bpf_iter_task_new(). Prior to the
preceding commit, this scenario could potentially trigger a kernel panic.
However, with the previous commit, this test case is expected to function
correctly.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240217114152.1623-3-laoar.shao@gmail.com
|
|
Failure to initialize it->pos, coupled with the presence of an invalid
value in the flags variable, can lead to it->pos referencing an invalid
task, potentially resulting in a kernel panic. To mitigate this risk, it's
crucial to ensure proper initialization of it->pos to NULL.
Fixes: ac8148d957f5 ("bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/bpf/20240217114152.1623-2-laoar.shao@gmail.com
|
|
bpf_timer_cancel
This selftest is based on a Alexei's test adopted from an internal
user to troubleshoot another bug. During this exercise, a separate
racing bug was discovered between bpf_timer_cancel_and_free
and bpf_timer_cancel. The details can be found in the previous
patch.
This patch is to add a selftest that can trigger the bug.
I can trigger the UAF everytime in my qemu setup with KASAN. The idea
is to have multiple user space threads running in a tight loop to exercise
both bpf_map_update_elem (which calls into bpf_timer_cancel_and_free)
and bpf_timer_cancel.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240215211218.990808-2-martin.lau@linux.dev
|
|
The following race is possible between bpf_timer_cancel_and_free
and bpf_timer_cancel. It will lead a UAF on the timer->timer.
bpf_timer_cancel();
spin_lock();
t = timer->time;
spin_unlock();
bpf_timer_cancel_and_free();
spin_lock();
t = timer->timer;
timer->timer = NULL;
spin_unlock();
hrtimer_cancel(&t->timer);
kfree(t);
/* UAF on t */
hrtimer_cancel(&t->timer);
In bpf_timer_cancel_and_free, this patch frees the timer->timer
after a rcu grace period. This requires a rcu_head addition
to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init,
this does not need a kfree_rcu because it is still under the
spin_lock and timer->timer has not been visible by others yet.
In bpf_timer_cancel, rcu_read_lock() is added because this helper
can be used in a non rcu critical section context (e.g. from
a sleepable bpf prog). Other timer->timer usages in helpers.c
have been audited, bpf_timer_cancel() is the only place where
timer->timer is used outside of the spin_lock.
Another solution considered is to mark a t->flag in bpf_timer_cancel
and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free,
it busy waits for the flag to be cleared before kfree(t). This patch
goes with a straight forward solution and frees timer->timer after
a rcu grace period.
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240215211218.990808-1-martin.lau@linux.dev
|
|
FORTIFY_SOURCE has been ignoring 0-sized destinations while the kernel
code base has been converted to flexible arrays. In order to enforce
the 0-sized destinations (e.g. with __counted_by), the remaining 0-sized
destinations need to be handled. Unfortunately, struct vic_provinfo
resists full conversion, as it contains a flexible array of flexible
arrays, which is only possible with the 0-sized fake flexible array.
Use unsafe_memcpy() to avoid future false positives under
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since there is a utility available for this, use
the API rather than open code.
Fixes: 13943d6c8273 ("ionic: prevent pci disable of already disabled device")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While working on the patchset to remove extent locking I got a lockdep
splat with fiemap and pagefaulting with my new extent lock replacement
lock.
This deadlock exists with our normal code, we just don't have lockdep
annotations with the extent locking so we've never noticed it.
Since we're copying the fiemap extent to user space on every iteration
we have the chance of pagefaulting. Because we hold the extent lock for
the entire range we could mkwrite into a range in the file that we have
mmap'ed. This would deadlock with the following stack trace
[<0>] lock_extent+0x28d/0x2f0
[<0>] btrfs_page_mkwrite+0x273/0x8a0
[<0>] do_page_mkwrite+0x50/0xb0
[<0>] do_fault+0xc1/0x7b0
[<0>] __handle_mm_fault+0x2fa/0x460
[<0>] handle_mm_fault+0xa4/0x330
[<0>] do_user_addr_fault+0x1f4/0x800
[<0>] exc_page_fault+0x7c/0x1e0
[<0>] asm_exc_page_fault+0x26/0x30
[<0>] rep_movs_alternative+0x33/0x70
[<0>] _copy_to_user+0x49/0x70
[<0>] fiemap_fill_next_extent+0xc8/0x120
[<0>] emit_fiemap_extent+0x4d/0xa0
[<0>] extent_fiemap+0x7f8/0xad0
[<0>] btrfs_fiemap+0x49/0x80
[<0>] __x64_sys_ioctl+0x3e1/0xb50
[<0>] do_syscall_64+0x94/0x1a0
[<0>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
I wrote an fstest to reproduce this deadlock without my replacement lock
and verified that the deadlock exists with our existing locking.
To fix this simply don't take the extent lock for the entire duration of
the fiemap. This is safe in general because we keep track of where we
are when we're searching the tree, so if an ordered extent updates in
the middle of our fiemap call we'll still emit the correct extents
because we know what offset we were on before.
The only place we maintain the lock is searching delalloc. Since the
delalloc stuff can change during writeback we want to lock the extent
range so we have a consistent view of delalloc at the time we're
checking to see if we need to set the delalloc flag.
With this patch applied we no longer deadlock with my testcase.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
With the following file extent layout, defrag would do unnecessary IO
and result more on-disk space usage.
# mkfs.btrfs -f $dev
# mount $dev $mnt
# xfs_io -f -c "pwrite 0 40m" $mnt/foobar
# sync
# xfs_io -f -c "pwrite 40m 16k" $mnt/foobar
# sync
Above command would lead to the following file extent layout:
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 298844160 nr 41943040
extent data offset 0 nr 41943040 ram 41943040
extent compression 0 (none)
item 7 key (257 EXTENT_DATA 41943040) itemoff 15763 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13631488 nr 16384
extent data offset 0 nr 16384 ram 16384
extent compression 0 (none)
Which is mostly fine. We can allow the final 16K to be merged with the
previous 40M, but it's upon the end users' preference.
But if we defrag the file using the default parameters, it would result
worse file layout:
# btrfs filesystem defrag $mnt/foobar
# sync
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 298844160 nr 41943040
extent data offset 0 nr 8650752 ram 41943040
extent compression 0 (none)
item 7 key (257 EXTENT_DATA 8650752) itemoff 15763 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 340787200 nr 33292288
extent data offset 0 nr 33292288 ram 33292288
extent compression 0 (none)
item 8 key (257 EXTENT_DATA 41943040) itemoff 15710 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13631488 nr 16384
extent data offset 0 nr 16384 ram 16384
extent compression 0 (none)
Note the original 40M extent is still there, but a new 32M extent is
created for no benefit at all.
[CAUSE]
There is an existing check to make sure we won't defrag a large enough
extent (the threshold is by default 32M).
But the check is using the length to the end of the extent:
range_len = em->len - (cur - em->start);
/* Skip too large extent */
if (range_len >= extent_thresh)
goto next;
This means, for the first 8MiB of the extent, the range_len is always
smaller than the default threshold, and would not be defragged.
But after the first 8MiB, the remaining part would fit the requirement,
and be defragged.
Such different behavior inside the same extent caused the above problem,
and we should avoid different defrag decision inside the same extent.
[FIX]
Instead of using @range_len, just use @em->len, so that we have a
consistent decision among the same file extent.
Now with this fix, we won't touch the extent, thus not making it any
worse.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 0cb5950f3f3b ("btrfs: fix deadlock when reserving space during defrag")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In bond priority testing, we set the primary interface to eth1 and add
eth0,1,2 to bond in serial. This is OK in normal times. But when in
debug kernel, the bridge port that eth0,1,2 connected would start
slowly (enter blocking, forwarding state), which caused the primary
interface down for a while after enslaving and active slave changed.
Here is a test log from Jakub's debug test[1].
[ 400.399070][ T50] br0: port 1(s0) entered disabled state
[ 400.400168][ T50] br0: port 4(s2) entered disabled state
[ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one
[ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link
[ 400.943633][ T2766] br0: port 1(s0) entered blocking state
[ 400.944119][ T2766] br0: port 1(s0) entered forwarding state
[ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one
[ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link
[ 401.131643][ T69] br0: port 2(s1) entered blocking state
[ 401.132067][ T69] br0: port 2(s1) entered forwarding state
[ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link
[ 401.348414][ T50] br0: port 4(s2) entered blocking state
[ 401.348857][ T50] br0: port 4(s2) entered forwarding state
[ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave
[ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave
[ 401.526986][ T250] bond0: (slave eth2): making interface the new active one
[ 401.629470][ T250] bond0: (slave eth0): link status definitely up
[ 401.630089][ T250] bond0: (slave eth1): link status definitely up
[...]
# TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL]
# Current active slave is eth2 but not eth1
Fix it by setting active slave to primary slave specifically before
testing.
[1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout
Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Reformat nested if-conditionals in Makefiles with 4 spaces
- Fix CONFIG_DEBUG_INFO_BTF builds for big endian
- Fix modpost for module srcversion
- Fix an escape sequence warning in gen_compile_commands.py
- Fix kallsyms to ignore ARMv4 thunk symbols
* tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kallsyms: ignore ARMv4 thunks along with others
modpost: trim leading spaces when processing source files list
gen_compile_commands: fix invalid escape sequence warning
kbuild: Fix changing ELF file type for output of gen_btf for big endian
docs: kconfig: Fix grammar and formatting
kbuild: use 4-space indentation when followed by conditionals
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Use a GB page for identity mapping only when memory of this size is
requested so that mapping of reserved regions is prevented which
would otherwise lead to system crashes on UV machines
* tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix GICv4.1 affinity update
- Restore a quirk for ACPI-based GICv4 systems
- Handle non-coherent GICv4 redistributors properly
- Prevent spurious interrupts on Broadcom devices using GIC v3
architecture
- Other minor fixes
* tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update
irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems
irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors
irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init()
irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc()
irqchip/irq-brcmstb-l2: Add write memory barrier before exit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc"
* tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Fix block process call transactions
i2c: pasemi: split driver into two separate modules
i2c: qcom-geni: Correct I2C TRE sequence
|
|
Justin Chen says:
====================
net: bcmasp: bug fixes for bcmasp
Fix two bugs.
- Indicate that PM is managed by mac to prevent double pm calls. This
doesn't lead to a crash, but waste a noticable amount of time
suspending/resuming.
- Sanity check for OOB write was off by one. Leading to a false error
when using the full array.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A sanity check for OOB write is off by one leading to a false positive
when the array is full.
Fixes: 9b90aca97f6d ("net: ethernet: bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid the PHY library call unnecessarily into the suspend/resume
functions by setting phydev->mac_managed_pm to true. The ASP driver
essentially does exactly what mdio_bus_phy_resume() does.
Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Matthieu Baerts says:
====================
mptcp: misc. fixes for v6.8
This series includes 4 types of fixes:
Patches 1 and 2 force the path-managers not to allocate a new address
entry when dealing with the "special" ID 0, reserved to the address of
the initial subflow. These patches can be backported up to v5.19 and
v5.12 respectively.
Patch 3 to 6 fix the in-kernel path-manager not to create duplicated
subflows. Patch 6 is the main fix, but patches 3 to 5 are some kind of
pre-requisities: they fix some data races that could also lead to the
creation of unexpected subflows. These patches can be backported up to
v5.7, v5.10, v6.0, and v5.15 respectively.
Note that patch 3 modifies the existing ULP API. No better solutions
have been found for -net, and there is some similar prior art, see
commit 0df48c26d841 ("tcp: add tcpi_bytes_acked to tcp_info"). Please
also note that TLS ULP Diag has likely the same issue.
Patches 7 to 9 fix issues in the selftests, when executing them on older
kernels, e.g. when testing the last version of these kselftests on the
v5.15.148 kernel as it is done by LKFT when validating stable kernels.
These patches only avoid printing expected errors the console and
marking some tests as "OK" while they have been skipped. Patches 7 and 8
can be backported up to v6.6.
Patches 10 to 13 make sure all MPTCP selftests subtests have a unique
name. It is important to have a unique (sub)test name in TAP, because
that's the test identifier. Some CI environments might drop tests with
duplicated names. Patches 10 to 12 can be backported up to v6.6.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Some 'cestab' subtests from the diag selftest had the same names, e.g.:
....chk 0 cestab
Now the previous value is taken, to have different names, e.g.:
....chk 2->0 cestab after flush
While at it, the 'after flush' info is added, similar to what is done
with the 'in use' subtests. Also inspired by these 'in use' subtests,
'many' is displayed instead of a large number:
many msk socket present [ ok ]
....chk many msk in use [ ok ]
....chk many cestab [ ok ]
....chk many->0 msk in use after flush [ ok ]
....chk many->0 cestab after flush [ ok ]
Fixes: 81ab772819da ("selftests: mptcp: diag: check CURRESTAB counters")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Some 'in use' subtests from the diag selftest had the same names, e.g.:
chk 0 msk in use after flush
Now the previous value is taken, to have different names, e.g.:
chk 2->0 msk in use after flush
While at it, avoid repeating the full message, declare it once in the
helper.
Fixes: ce9902573652 ("selftests: mptcp: diag: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
