summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-09-30drm: i915: drop null test before destroy functionsJulia Lawall
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: make backlight hooks connector specificJani Nikula
Previously we've relied on having basically one backlight and one backlight type per platform. This is already a bit quirky with PMIC PWM support on VLV/CHV platforms with MIPI DSI. In the foreseeable future we'll have at least DPCD based backlight control on eDP and DCS command based backlight control on MIPI DSI. Backlight is becoming more and more connector specific, so reflect this fact by making the backlight control hooks connector specific. This enables further work to reuse generic backlight code in intel_panel.c while adding more specific backlight code accessed via the hooks. Cc: Deepak M <m.deepak@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Deepak M <m.deepak@intel.com> Reviewed-by: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/ddi: use switch case instead of if ladder for ddi_get_encoder_portJani Nikula
Make the alternatives stand out better. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/ddi: warn instead of oops on invalid ddi encoder typeJani Nikula
It's more useful to limp on than bring the kernel down. Hitting this is a more likely event with BXT DSI, although care should be taken not to call the function for DSI. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Use czclk_freq in vlv c0 residency calculationsVille Syrjälä
Replace the use of mem_freq/4 with czclk_freq in the vlv c0 residency calculations. Also deal with VLV_COUNT_RANGE_HIGH which affects all RCx residency counters. We have just enough bits to do this without intermediate divisions. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Simplify vlv/chv rc6 residency calculationVille Syrjälä
We have the czclk frequency in dev_priv now, so let's just use it when converting the rc6 counters to milliseconds. This eliminates a bunch of hairy code that essentially tries to extract the czclk frequency using yet another method. v2: Fix typos in commit message (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Read czclk from CCK on vlv/chvVille Syrjälä
As with the cdclk, read out czclk from CCK as well. This gives us the real current value and avoids having to decode fuses and whatnot. Also store it in kHz under dev_priv like we do for cdlck since it's not just an rps related clock, and having it in kHz is more standard/convenient for some things. Imre also pointed out that we currently fail to read czclk on VLV, which means the PFI credit programming isn't working as expected. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Renaming CCK related reg definitionsVandana Kannan
Rename the DISPLAY_TRUNK_* and DISPLAY_FREQUENCY_* bits to CCK_... instead of DISPLAY_... to make it clear they apply to all CCK clock control registers. Suggested by Ville. Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Fix comparison bugRasmus Villemoes
->stolen->start has type u64 aka unsigned long long; relying on the difference (effectively cast to int) for sorting is wrong. It wouldn't be a problem in practice if the values compared are always within INT_MAX of each other (so that the difference is actually representable in an int), but 440fd5283a87 ("drm/mm: Support 4 GiB and larger ranges") strongly suggests that's not the case. Note: atm we don't support more than about 1G of stolen, so this is impossible currenlty. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> [danvet: Add note that this is impossible currently.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen8: Move WaHdcDisableFetchWhenMasked to common init fnArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen8: Move WaForceEnableNonCoherent to common init fnArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen8: Move GEN7_GT_MODE WA to common init fnArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen8: Move Wa4x4STCOptimizationDisable to common init fnArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen8: Move HiZ RAW stall optimization disable WA to common init fnArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen8: Move WaDisablePartialInstShootdown to common init fnArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen8: Move WaDisableAsyncFlipPerfMode to common init fnArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen8: Move INSTPM WA to common functionArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen8: Add gen8_init_workarounds for common WAArun Siluvery
WA in this function should be ordered based on register address. The following order is suggested (Ville), instpm mi_mode row chicken half slice chicken common slice chicken hdc chicken cache_mode_0 cache_mode_1 gt_mode Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/skl: Remove WaDisableVFUnitClockGatingArun Siluvery
Dropping it because it is for pre-production stepping, also removed bit definition in i915_reg.h as it is not used anywhere else. Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Keep #define as Ville suggested.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/skl: Remove WaSetGAPSunitClckGateDisableArun Siluvery
Dropping it because it is for pre-production stepping, also removed bit definition in i915_reg as it is not used anywhere else. Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Keep define as Ville suggested.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/skl: Remove WaDisableSDEUnitClockGatingArun Siluvery
Dropping it because it is for pre-production stepping. Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/bxt: Add WaStoreMultiplePTEenable nameArun Siluvery
Updated WA with the name. Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen9: Merge two WA as they part of same registerArun Siluvery
Merge Wa4x4STCOptimizationDisable and WaDisablePartialResolveInVc to save an entry in WA array. Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/gen9: Handle error returned by gen9_init_workaroundsArun Siluvery
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Add CD and pixel clock informationMika Kahola
This patch adds information of current and maximum CD clock frequency and pixel clock frequency information on 'i915_debugfs.c'. v2: - combined seperate patches for current CD clock, maximum CD clock and maximum pixel clock - space added between the frequency value and the unit Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: s/DDI_BUF_CTL_A/DDI_BUF_CTL(PORT_A)/Ville Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Add VLV_HDMIB etc. which already include VLV_DISPLAY_BASEVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: s/_CURACNTR/CURCNTR(PIPE_A)/Ville Syrjälä
v2: Deal with _CURABASE too Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Parametrize PALETTE and LGC_PALETTEVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Include MCHBAR_MIRROR_BASE in ILK_GDSRVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Always use GEN8_RING_PDP_{LDW, UDW} instead of hand rolling the ↵Ville Syrjälä
register offsets Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Add LO/HI PRIVATE_PAT registersVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Parametrize UOS_RSA_SCRATCHVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Add HDMI aspect ratio property for SDVOVille Syrjälä
Handle the HDMI aspect ratio property the same way in the SDVO code as we handle it in the HDMI code. v2: Remove stray whitespace change Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Constify adjusted_modeVille Syrjälä
Make adjusted_mode const whereever we don't have to modify it. This only covers cases when we have a local adjusted_mode variable, and doesn't make any difference for cases where we just dereference pipe_config->adjusted_mode. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Move HDMI aspect ratio setup to .compute_config()Ville Syrjälä
We shouldn't frob adjusted_mode after .compute_config(), so move the infoframe aspect ratio setup to .compute_config() from intel_hdmi_set_avi_infoframe(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Always use crtc_ timings when dealing with adjustead_modeVille Syrjälä
The adjustead_mode crtc_ timings are what we will program into the hardware, so it's those timings we should be looking practically everywhere. The normal and crtc_ timings should differ only when stere doubling is used. In that case the normal timings are the orignal non-doubled timigns, and crtc_ timings are the doubled timings used by the hardware. The only case where we continue to look at the normal timings is when we pass the adjusted_mode to drm_match_{cea,hdmi}_mode() to find the VIC. drm_edid keeps the modes aronund in the non-double form only, so it needs the non-double timings to match against. Done with sed 's/adjusted_mode->\([vhVH]\)/adjusted_mode->crtc_\1/g' 's/adjusted_mode->clock/adjusted_mode->crtc_clock/g' with a manual s/VDisplay/vdisplay/ within the comment in intel_dvo.c v2: Update due to intel_dsi.c changes Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: s/mode/adjusted_mode/ in functions that really get passed the ↵Ville Syrjälä
adjusted_mode Rename the function argument to 'adjusted_mode' whenever the function only ever gets passed the adjusted_mode. v2: Update due to intel_dsi.c changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: export size_is_valid() from __intel_fbc_update()Paulo Zanoni
Make the giant function a little less giant. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add pipe_ prefix as suggested by Chris.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: extract fbc_supported()Paulo Zanoni
Make it clear that we're checking whether FBC is supported or not. The fact that the vfunc is not NULL is just a consequence. Another name option would have been fbc_initialized(). Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: don't use the first stolen page on BroadwellPaulo Zanoni
The spec says we just can't use it. v2: - Add WA name (Ville). - Add a big comment explaining that we still didn't fix the problem where we inherit a framebuffer on the first page (Chris, Ville). Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Add primary plane to mask if it's visibleMaarten Lankhorst
This fixes the warnings like "plane A assertion failure, should be disabled but not" that on the initial modeset during boot. This can happen if the primary plane is enabled by the firmware, but inheriting it fails because the DMAR is active or for other reasons. Most likely caused by commit 36750f284b3a4f19b304fda1bb7d6e9e1275ea8d Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Mon Jun 1 12:49:54 2015 +0200 drm/i915: update plane state during init This is the 4.4 version of commit 721a09f7393de6c28a07516dccd654c6e995944a Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Tue Sep 15 14:28:54 2015 +0200 drm/i915: Add primary plane to mask if it's visible Reported-by: Andreas Reis <andreas.reis@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91429 Reported-and-tested-by: Emil Renner Berthing <kernel@esmil.dk> Tested-by: Andreas Reis <andreas.reis@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Parametrize fence registersVille Syrjälä
v2: Hide the 945 vs. rest of gen2/3 difference in the macro Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/bxt: Set oscaledcompmethod to enable scale valueSonika Jindal
Bspec update tells that we have to enable oscaledcompmethod instead of ouniqetrangenmethod for enabling scale value during swing programming. v2: Adding back 'don't care' values to bxt_ddi_translations_dp and add error message if ouniquetrangemethod was set (Imre) Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>(v1) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/bxt: eDP low vswing supportSonika Jindal
Adding voltage swing table for edp to support low vswings. v2: Rebased. Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: fixup runtime PM handling v2Jesse Barnes
According to the PCI docs and Rafael, we don't need to be doing explicit enables and disables in our init and teardown routines, as they're taken care of by the PCI core. So drop the pm_runtime_disable() at teardown and pm_runtime_set_active() at init. This fixes one failure of the basic-pci-d3-state test on my BYT. v2: drop extra get_noresume() and put_noidle() (Rafael) Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/guc: Fix a bug in GuC status checkAlex Dai
Bit 16 of GuC status indicates resuming from RC6. The LAPIC_DONE status is a reliable readiness flag only when resuming from RC6. This fix a racing issue that allocation of doorbell fails whilst GuC init is not finished. Signed-off-by: Alex Dai <yu.dai@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Always call the adjusted mode 'adjusted_mode'Ville Syrjälä
Always name any variable pointing at the adjusted mode as 'adjustead_mode'. This will make it much easier to identify when we should use the crtc_ timings and when we shoudln't. Conversion was performed with coccinelle: @@ expression E; identifier I; @@ - struct drm_display_mode *I = &E.adjusted_mode; + struct drm_display_mode *adjusted_mode = &E.adjusted_mode; <... - I + adjusted_mode ...> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> [danvet: Fixup conflicts.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915: Use intel_panel for DVO fixed mode handlingVille Syrjälä
Replace intel_dvo->panel_fixed_mode with the appropriate intel_panel stuff. Now all connectors that have a fixed mode use intel_panel. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30drm/i915/skl: Block disable call for pw1 if dmc firmware is present.Animesh Manna
Another interesting criteria to work dmc as expected is pw1 to be enabled by driver and dmc will shut it off in its execution sequence. If already disabled by driver dmc will get confuse and behave differently than expected found during pc10 entry issue for skl. So berfore we disable power-well 1, added check if dmc firmware is present and driver will not disable power well 1, but for any reason if firmware is not present of failed to load we can shut off the power well 1 which will save some power. As skl is currently fully dependent on dmc to go in lowest possible power state (dc6) but the same is not applicable for bxt. Display engine can enter into dc9 without dmc, hence unblocking disable call. v1: Initial version. v2: Rebased as per current patch series. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com> Reviewed-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 20:37:19 +0000