| Age | Commit message (Collapse) | Author |
|---|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
imx7d-sdb-sht11.dtb: pinctrl@30330000: 'imx7d-sdb' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the "imx7d-sdb" wrapping node and adjust the names to have "grp"
prefix. Diff looks big but this should have no functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming:
imx7s-colibri-eval-v3.dtb: pinctrl@30330000: 'lvdstx' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
imx7s-warp.dtb: pinctrl@30330000: 'usdhc3grp_100mhz', 'usdhc3grp_200mhz' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is no "fsl,phy" property in pin controller pincfg nodes:
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix file patterns for TQ systems DTS after re-organizing the ARM DTS
structure to fix get_maintainers.pl self-tests like:
./MAINTAINERS:23329: warning: no file matches F: arch/arm/boot/dts/imx*mba*.dts*
Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The merge of imx-spdif driver into fsl-asoc-card brought
new DT properties that can be used with the "fsl,imx-audio-spdif"
compatible:
* The "spdif-controller" property from imx-spdif is named "audio-cpu"
in fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
with "audio-codec".
With an S/PDIF, codec drivers spdif_transmitter and
spdif_receiver should be used.
Driver imx-spdif used instead the dummy codec and a pair of
boolean properties, "spdif-in" and "spdif-out".
While backward compatibility is kept to support properties
"spdif-controller", "spdif-in" and "spdif-out", using new properties has
several benefits:
* "audio-cpu" and "audio-codec" are more generic names reflecting
that the fsl-asoc-card driver supports multiple hardware.
They are properties already used by devices using the
fsl-asoc-card driver.
They are also similar to properties of simple-card: "cpu" and "codec".
* "spdif-in" and "spdif-out" imply the use of the dummy codec in the
driver. However, there are already two codec drivers for the S/PDIF,
spdif_transmitter and spdif_receiver.
It is better to declare S/PDIF Tx and Rx devices in a DT, and then
reference them with "audio-codec" than using the dummy codec.
For those reasons, this commit updates in-tree DTs to use the new
properties:
* Rename "spdif-controller" property to "audio-cpu".
* Declare S/PDIF transmitter and/or receiver devices, and use them with
the "audio-codec" property instead of "spdif-out" and/or "spdif-in".
These modifications were tested only on an imx8mn-evk board.
Note that out-of-tree and old DTs are still supported.
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The regulator should not be placed under simple-bus.
Remove it from simple-bus to fix the following dt-schema warnings:
'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
regulators: #size-cells:0:0: 0 is not one of [1, 2]
regulators: regulator@0:reg:0: [0] is too short
regulators: 'ranges' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the bindings for the Kontron i.MX93 OSM-S SoM and BL carrier
board.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQ-Systems is written with a hyphen. The incorrect spelling with spaces
is therefore corrected.
While at it, comments are added to TQMa6ULLx.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add compatible string fsl-ls2081a-rdb for ls2081a rdb boards to fix below
warning:
arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dtb: /:
failed to match any schema with compatible: ['fsl,ls2081a-rdb', 'fsl,ls2081a']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to datasheet, Chapter 34. Clock Generator, section 34.2,
Embedded characteristics, source clock for RTT is the TD_SLCK, registered
with ID 1 by the slow clock controller driver. Fix RTT clock.
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Link: https://lore.kernel.org/r/20240826165320.3068359-1-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
vcc3v3-sd-s0-regulator used enable-active-low. According the binding
of the fixed regulator, that is the assumed mode of operation if
enable-active-high is not specified. So this is property is not part
of the binding, therefore remove it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240829132100.1723127-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
regulator-init-microvolt is used in the vendor-kernel, but not part
of the specification.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240829132100.1723127-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A remant from moving from the vendor kernel, the regulator is using
a fairchild fcs prefix instead of rockchip,* in the mainline kernel
according to its binding.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240829132100.1723127-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
There is no DAC connected to the SPI bus of the Elgin RV1108 R1 board.
There is a JG10309-01 LCD controlled via SPI though.
Properly describe it by adding the "elgin,jg10309-01" compatible
string.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/linux-arm-kernel/20240717-parrot-malt-83cc04bf6b36@spud/
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240829113158.3324928-3-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
One of the key differences between p3701-0000 and p3701-0008 is the
temperature range. Add this info for p3701-0008.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
All SKUs of the p3701 module contain a temp sensor connected to the
BPMP I2C. Move the associated nodes from tegra234-p3701-0008.dtsi
to tegra234-p3701.dtsi. Add missing compatible.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Some padctl supply nodes currently reside in board file, when they
should reside on module level. The nodes are part of module,
not board. Move these nodes to the correct AGX Orin
module file.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Some of the nodes inside the AGX Orin module file are in the
wrong location. In particular, the SD card interface and
two of the PCIe regulators in the module file should instead
reside in the board file. These components are not part of the
module. They are part of the carrier board. Move these
nodes to the correct location.
Fixes: cd42b26a527f ("arm64: tegra: Add regulators required for PCIe")
Fixes: d71b893a119d ("arm64: tegra: Add Tegra234 SDMMC1 device tree node")
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Current IGX Orin structure has both a top-level module+board
file as well as a board file. Most of the data in the board-file
is closely related to the module itself. The benefit of this
extra file is outweighed by the additional complexity. Merge
the board file into the module+board file for simplicity.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The current AGX Orin structure has both a top-level module+board
file as well as a board file. Most of the data in the board-file
is closely related to the module itself. The benefit of this
extra file is outweighed by the additional complexity. Merge
the board file into the module+board file for simplicity.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The AGX Orin module boards contain common nodes that can
be moved to the included module dtsi. This eliminates
redundancy within the files and reduces lines of code.
Data from tegra234-p3701-0000 and tegra234-p3701-0008 that
is common is now in tegra234-p3701.dtsi.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Pins responsible for controlling these LEDs need to have tristate
control removed if we want them as GPIOs. This change aligns with
pinmux configuration of "dte" pin group in downstream kernel[1].
These LEDs had no function assigned on vendor kernel and there is no
label on the case, the only markings are on PCB which are part of node
names (ds1 marking is on power LED controlled by PMIC), so generic term
is assigned as the function.
1. https://github.com/compulab/trimslice-android-kernel/blob/upstream/arch/arm/mach-tegra/board-trimslice-pinmux.c#L45
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
P2180 modules have WiFi in form of BCM4354 chip, and kernel driver
supports this one, so enable it for all users. The necessary calibration
file can be obtained from Jetson Linux Archive. nvram.txt file is
located in "Driver Package (BSP)" in
nv_tegra/l4t_deb_packages/nvidia-l4t-firmware_<version>_arm64.deb
archive. The rest of necessary blobs can be obtained from official
Linux Firmware repository or (newer ones) from Infineon
ifx-linux-firmware repository (look in older releases).
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
P2180 modules have Bluetooth in form of BCM4354 chip, and kernel driver
supports this one, so enable it for all users. The necessary firmware
can be obtained from Jetson Linux Archive. bcm4354.hcd file is located
in "Driver Package (BSP)" in
nv_tegra/l4t_deb_packages/nvidia-l4t-firmware_<version>_arm64.deb
archive.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
One INA3221 sensor is located on P2180 module and the other two are on
P2597 base board.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add implementation details for Orin NX/Nano PCIe EP on C4.
Signed-off-by: Vedant Deshpande <vedantd@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add PCIe C4 EP controller definition in device tree for Tegra234
devices.
Signed-off-by: Vedant Deshpande <vedantd@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add the definition for the wp-gpio of the P2597's external card slot,
enabling this functionality.
Tested on a P2597 board.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The current declaration is off-by-one and actually corresponds to the
wp-gpio of the external slot.
Tested on a P2597 board.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Avoid firing useless warnings when running make dtbs_check
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Fixes issue when resuming after suspend made USB in peripheral
mode inaccessible.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Downstream kernel states that backlight has no actual enable GPIO
and uses fixed regulator.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Group GPIO keys into keys and switches.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add MMC nodes configuration along with WIFI binding to ASUS TF701T
device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
With these changes sound works, only UCM configs are needed for
complete support.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Complete and adjust magnetometer, thermal sensor, motion tracker,
power and light sensors according to available sources.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add serial node along with bluetooth node to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add HDMI nodes to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add missing parts of PMIC complex, extend PMC binding and add missing
fixed regulators. Additionally, refresh naming to better reflect
regulator purpose.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add Video Decoder Engine node to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Mimic original downstream board behavior to set up all pinmux at once.
Per-device pinmux is good but we have no complete board schematics
to allow such luxury.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Mask Rom key is connected to SARADC and can be read from OS.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-9-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the USB-C port on FriendlyELEC NanoPC-T6.
Works one way so far but still better than before.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-8-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the Mali GPU on FriendlyELEC NanoPC-T6
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-7-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
FriendlyELEC NanoPC-T6 has IR receiver connected to PWM3_IR_M0 line
which ends as GPIO0_D4.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-6-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
FriendlyELEC NanoPC-T6 has optional SPI flash chip on-board.
It is populated with 32MB one on LTS version.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-5-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
In the LTS (2310) version the miniPCIe slot got removed and USB 2.0
setup has changed. There are two external accessible ports and two ports
on the internal header.
There is an on-board USB hub which provides:
- one external connector (bottom one)
- two internal ports on pin header
- one port for m.2 E connector
The top USB 2.0 connector comes directly from the SoC.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-4-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
MiniPCIe slot is present only in first version of NanoPC-T6 (2301).
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-3-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
FriendlyELEC introduced a second version of NanoPC-T6 SBC.
Create common include file and make NanoPC-T6 use it. Following
patches will add LTS version.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-2-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add devicetree binding for the NanoPC-T6 LTS board.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-1-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
