summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-24mt76: mt7603: check for single-stream EEPROM configurationFelix Fietkau
Some devices using MT7628 or MT7603 have only one antenna chain connected. Detect these using the EEPROM rx/tx path settings Reported-by: Qin Wei <me@vonger.cn> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: add memory barrier to DMA queue kickFelix Fietkau
Ensure that descriptor memory has been fully written before letting the hardware read it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: add support for accessing mapped registers via bus opsFelix Fietkau
Makes it possible to read/write them via debugfs, similar to mt7615/7603 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: significantly reduce interrupt loadFelix Fietkau
On 7615 and newer, DMA completion only triggers unmap, but not free of queued skbs, since pointers to packets are queued internally. Because of that, there is no need to process the main data queue immediately on DMA completion. To improve performance, mask out the DMA data queue completion interrupt and process the queue only when we receive a txfree event. This brings the number of interrupts under load down to a small fraction. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: significantly reduce interrupt loadFelix Fietkau
On 7615 and newer, DMA completion only triggers unmap, but not free of queued skbs, since pointers to packets are queued internally. Because of that, there is no need to process the main data queue immediately on DMA completion. To improve performance, mask out the DMA data queue completion interrupt and process the queue only when we receive a txfree event. This brings the number of interrupts under load down to a small fraction. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: schedule tx tasklet in mt7915_mac_tx_freeFelix Fietkau
The previous scheduling round may have been limited by AQL. More frames might be available after the tx free run. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: dma: update q->queued immediately on cleanupFelix Fietkau
Tx cleanup and tx enqueuing can run in parallel. In order to avoid queue starvation issues under load, update q->queued immediately. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: optimize mt7915_mac_sta_pollFelix Fietkau
Since DMA completion does not imply tx completion, it makes more sense to poll for airtime from mt7915_mac_tx_free. Reduce the runtime of the function by moving all items from dev->sta_poll_list to a local list once and process any stations that were added afterwards on the next run Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: fix reading airtime statisticsFelix Fietkau
- change the WTBL LMAC access function to set the mapping window only once - use ac * 2 as offset, since each AC has separate words for rx and tx Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663u: fix dma header initializationLorenzo Bianconi
Fix length field corruption in usb dma header introduced adding sdio support Fixes: 75b10f0cbd0b ("mt76: mt76u: add mt76_skb_adjust_pad utility routine") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: fix a possible NULL pointer dereference in mt76_testmode_dumpLorenzo Bianconi
Fix a possible NULL pointer dereference in mt76_testmode_dump() since nla_nest_start returns NULL in case of error Fixes: f0efa8621550e ("mt76: add API for testmode support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: fix a possible NULL pointer dereference in mt7615_pm_wake_workLorenzo Bianconi
Initialize wcid to global_wcid if msta is NULL in mt7615_pm_wake_work routine since wcid will be dereferenced running mt76_tx() Fixes: 2b8cdfb28d340 ("mt76: mt7615: wake device before pushing frames in mt7615_tx") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: fix possible memory leak in mt7615_tm_set_tx_powerLorenzo Bianconi
Fix a memory leak in mt7615_tm_set_tx_power routine if mt7615_eeprom_get_target_power_index fails. Moreover do not account req_header twice in mcu skb allocation. Fixes: 4f0bce1c88882 ("mt76: mt7615: implement testmode support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: fix unable to handle kernel paging requestSean Wang
Use buffer allocated with kmalloc instead of with stack to fix kernel crash due to Unable to handle kernel paging request at virtual address ffffffc0095cbce8. [ 156.977349] Unable to handle kernel paging request at virtual address ffffffc0095cbce8 [ 156.985270] Mem abort info: [ 156.988059] ESR = 0x96000045 [ 156.991104] Exception class = DABT (current EL), IL = 32 bits [ 156.997013] SET = 0, FnV = 0 [ 157.000057] EA = 0, S1PTW = 0 [ 157.003190] Data abort info: [ 157.006061] ISV = 0, ISS = 0x00000045 [ 157.009887] CM = 0, WnR = 1 [ 157.012850] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 0000000042adcba2 [ 157.019715] [ffffffc0095cbce8] pgd=0000000000000000, pud=0000000000000000 [ 157.026499] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 157.032065] Modules linked in: mt7663s mt7663_usb_sdio_common mt7615_common ... [ 157.073007] Process CompositorTileW (pid: 1625, stack limit = 0x000000003f2389fc) [ 157.080484] CPU: 0 PID: 1625 Comm: CompositorTileW Not tainted 4.19.137 #36 [ 157.092219] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 157.097012] pc : __memcpy+0xc0/0x180 [ 157.100585] lr : swiotlb_tbl_unmap_single+0x84/0x14c [ 157.105540] sp : ffffff8008003cb0 [ 157.108845] x29: ffffff8008003cb0 x28: ffffff9c1a211f60 [ 157.114149] x27: ffffff9c19ecc018 x26: 0000000000001000 [ 157.119452] x25: ffffff9c1a378000 x24: 0000000000000001 [ 157.124755] x23: ffffff9c1a378000 x22: 00000000000001ff [ 157.130058] x21: 0000000000000000 x20: 00000000fbefe800 [ 157.135360] x19: 0000000000000070 x18: 0000000000000000 [ 157.140663] x17: 0000000000000000 x16: 0000000000000000 [ 157.145965] x15: 0000000000000000 x14: 0000000000000000 [ 157.151267] x13: 0000000000000000 x12: 000000000000000d [ 157.156569] x11: 000000000000000c x10: 0000000a7befe800 [ 157.161873] x9 : fffffff680000000 x8 : 0000000000000000 [ 157.167175] x7 : 0000000100000003 x6 : ffffffc0095cbce8 [ 157.172479] x5 : 0000000000000000 x4 : 0000000000000000 [ 157.177781] x3 : 0000000000000002 x2 : fffffffffffffff0 [ 157.183085] x1 : ffffffca7befe810 x0 : ffffffc0095cbce8 [ 157.188389] Call trace: [ 157.190832] __memcpy+0xc0/0x180 [ 157.194053] swiotlb_unmap_sg_attrs+0xa8/0xb0 [ 157.198406] __swiotlb_unmap_sg_attrs+0x8c/0xa4 [ 157.202931] msdc_unprepare_data+0x6c/0x84 [ 157.207019] msdc_request_done+0x58/0x98 [ 157.210934] msdc_data_xfer_done+0x1a8/0x1d0 [ 157.215195] msdc_irq+0x12c/0x17c [ 157.218505] __handle_irq_event_percpu+0xd8/0x298 [ 157.223202] handle_irq_event+0x60/0xdc [ 157.227031] handle_fasteoi_irq+0xa4/0x1d4 [ 157.231120] __handle_domain_irq+0x84/0xc4 [ 157.235210] gic_handle_irq+0x124/0x1a4 [ 157.239038] el0_irq_naked+0x4c/0x54 [ 157.242608] Code: 14000028 f1020042 5400024a a8c12027 (a88120c7) [ 157.248693] ---[ end trace 28b8090135b0a2e1 ]--- [ 157.265589] Kernel panic - not syncing: Fatal exception in interrupt [ 157.271944] SMP: stopping secondary CPUs [ 157.275865] Kernel Offset: 0x1c10e00000 from 0xffffff8008000000 [ 157.281779] CPU features: 0x0,2188200c [ 157.285519] Memory Limit: none Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support") Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: fix resume failureSean Wang
MT7663s have to rely on MMC_PM_KEEP_POWER in pm_flags for to avoid SDIO power is being shut off. To fix sdio access failure like "mt7663s mmc1:0001:1: sdio write failed: -22" for the first sdio command to access the bus in the resume handler. Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support") Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: use NULL instead of 0 in sdio codeLorenzo Bianconi
Fix the following sparse warnings in mt7663s driver: drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c:78:62: warning: Using plain integer as NULL pointer drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c:110:62: warning: Using plain integer as NULL pointer drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c:229:64: warning: Using plain integer as NULL pointer drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c:263:64: warning: Using plain integer as NULL pointer Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: release mutex in mt7615_reset_test_setLorenzo Bianconi
Reduce scope of mutex_acquire/mutex_release in mt7615_reset_test_set routine in order to fix the following static checker warning: drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c:179 mt7615_reset_test_set() warn: inconsistent returns 'dev->mt76.mutex'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: ea4906c4be49 ("mt76: mt7615: wake device before accessing regmap in debugfs") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: add Tx A-MSDU offloading supportRyder Lee
This disables the software A-MSDU aggregation in mac80211 and enables hardware offloading Suggested-by: Yiwei Chung <yiwei.chung@mediatek.com> Suggested-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: add missing flags in WMM parameter settingsFelix Fietkau
Indicate the filled parameter to the firmware Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: simplify aggregation session checkFelix Fietkau
Use the txwi data as primary source information to avoid touching skb data Use bitfield instead of state variable + spinlock Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: remove mtxq->agg_ssn assignmentFelix Fietkau
It is not used anywhere for this driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: move mt76_check_agg_ssn to driver tx_prepare callsFelix Fietkau
mt7615 and newer drivers do not need this, since they use sequence number offload Moving this code also reduces the number of callsites to make it easier to review Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: enable offloading of sequence number assignmentFelix Fietkau
Preparation for supporting more offload features Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: increase tx retry countFelix Fietkau
Set it to 15 to match reference driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: clean up station stats polling and rate control updateFelix Fietkau
Queueing a per-sta work item from the tx free path can become very expensive under load. This work is only supposed to pull rate control stats every second and deal with rate control changes. Additionally, the rate control update code was wrong, because it was confusing bit masks and bit numbers in test_bit. Fix this by introducing a dedicated device work item for rate control updates, and by polling station stats from the phy mac work. Stations requiring polling or rate control updates are added to lists protected by dev->sta_poll_lock. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: do not do any work in napi poll after calling napi_complete_done()Felix Fietkau
Fixes a race condition where multiple tx cleanup or sta poll tasks could run in parallel. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: do not do any work in napi poll after calling napi_complete_done()Felix Fietkau
Fixes a race condition where multiple tx cleanup tasks could run in parallel Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76x02: clean up and fix interrupt masking in the irq handlerFelix Fietkau
Only clear unmasked interrupts. If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Disable interrupts in one call before scheduling Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: only clear unmasked interrupts in irq taskletFelix Fietkau
If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: clean up and fix interrupt masking in the irq handlerFelix Fietkau
Only clear unmasked interrupts. If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: set interrupt mask register to 0 before requesting irqFelix Fietkau
Avoids spurious interrupts in case the hardware was running already Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: fix double DMA unmap of the first buffer on 7615/7915Felix Fietkau
A small part of the first skb buffer is passed to the firmware for parsing via DMA, while the full buffer is passed as part of the TXP. Avoid calling DMA unmap on the first part (with a different length than map) Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: fix crash on tx rate report for invalid stationsFelix Fietkau
Check wcid RCU pointer before using it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: enable U-APSD on AP sideRyder Lee
Enable U-APSD support for AP interface. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76s: get rid of unused variableLorenzo Bianconi
Remove unused state variable in mt76_sdio structure Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76s: move tx/rx processing in 2 separate worksLorenzo Bianconi
In order to maximize parallelism, split status work in tx status work and rx net work Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76s: move status processing in txrx wqLorenzo Bianconi
As it has been done for tx and rx processing, move tx/rx status processing into mt76s_txrx_wq workqueue Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: move rx processing in txrx wqLorenzo Bianconi
Move rx processing to mt76s_txrx_wq in order to minimize the interval when the sdio bus is locked during rx Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76s: move tx processing in a dedicated wqLorenzo Bianconi
Introduce mt76s_txrx_wq workqueue and move tx processing from kthread to a dedicated work. This is preliminary patch to improve mt7663s throughput Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76s: fix oom in mt76s_tx_queue_skb_rawLorenzo Bianconi
Free the mcu skb in case of error in mt76s_tx_queue_skb_raw routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: reschedule runtime-pm receiving a tx interruptLorenzo Bianconi
Reschedule runtime-pm after receiving a tx interrupt. Update runtime-pm last activity before injecting packets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: do not inject packets if MT76_STATE_PM is setLorenzo Bianconi
Do not tx packets in mt76_txq_send_burst() or mt76_txq_schedule_list() if the device is in runtime-pm Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: hold mt76 lock queueing wd in mt7615_queue_key_updateLorenzo Bianconi
wq queue is always updated holding mt76 spinlock. Grab mt76 lock in mt7615_queue_key_update() before putting a new element at the end of the queue. Fixes: eb99cc95c3b65 ("mt76: mt7615: introduce mt7663u support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: move drv_own/fw_own in mt7615_mcu_opsLorenzo Bianconi
Initialize set_drv_ctrl and set_fw_ctrl function pointers in mt7663s_mcu_init. This is a preliminary patch to enable runtime-pm for mt7663s chipset. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: move drv_own/fw_own in mt7615_mcu_opsLorenzo Bianconi
Introduce set_drv_ctrl and set_fw_ctrl function pointers in mt7615_mcu_ops data structure. This is a preliminary patch to enable runtime-pm for non-pci chipsets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: register ext_phy if DBDC is detectedShayne Chen
MT_EE_WIFI_CONF field can be used to detect if the chipset is MT7615D. Thus, add support to automatically register ext_phy if DBDC is detected. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24zd1201: simplify the return expression of zd1201_set_maxassoc()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200921131115.93504-1-miaoqinglang@huawei.com
2020-09-24rtw88: Fix potential probe error handling race with wow firmware loadingAndreas Färber
If rtw_core_init() fails to load the wow firmware, rtw_core_deinit() will not get called to clean up the regular firmware. Ensure that an error loading the wow firmware does not produce an oops for the regular firmware by waiting on its completion to be signalled before returning. Also release the loaded firmware. Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported") Cc: Chin-Yen Lee <timlee@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200920132621.26468-3-afaerber@suse.de
2020-09-24rtw88: Fix probe error handling race with firmware loadingAndreas Färber
In case of rtw8822be, a probe failure after successful rtw_core_init() has been observed to occasionally lead to an oops from rtw_load_firmware_cb(): [ 3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000 [ 3.930531] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 3.944042] pci 0001:01:00.0: supports D1 D2 [ 3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit] [ 3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit] [ 3.972332] pci 0001:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] [ 3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001) [ 3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory [ 3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region [ 4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources [ 4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12 [ 4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c [ 4.058975] Mem abort info: [ 4.058980] ESR = 0x96000004 [ 4.058990] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.070353] SET = 0, FnV = 0 [ 4.073487] EA = 0, S1PTW = 0 [ 4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console [ 4.076723] Data abort info: [ 4.086415] ISV = 0, ISS = 0x00000004 [ 4.087731] Freeing unused kernel memory: 1792K [ 4.090391] CM = 0, WnR = 0 [ 4.098091] [edafeaac9607952c] address between user and kernel address ranges [ 4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4.111129] Modules linked in: [ 4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700 [ 4.122386] Hardware name: Realtek Saola EVB (DT) [ 4.127223] Workqueue: events request_firmware_work_func [ 4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 4.138393] pc : rtw_load_firmware_cb+0x54/0xbc [ 4.143040] lr : request_firmware_work_func+0x44/0xb4 [ 4.148217] sp : ffff800010133d70 [ 4.151616] x29: ffff800010133d70 x28: 0000000000000000 [ 4.157069] x27: 0000000000000000 x26: 0000000000000000 [ 4.162520] x25: 0000000000000000 x24: 0000000000000000 [ 4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100 [ 4.173424] x21: ffff00007ad35880 x20: edafeaac96079504 [ 4.178877] x19: ffff00007ad35870 x18: 0000000000000000 [ 4.184328] x17: 00000000000044d8 x16: 0000000000004310 [ 4.189780] x15: 0000000000000800 x14: 00000000ef006305 [ 4.195231] x13: ffffffff00000000 x12: ffffffffffffffff [ 4.200682] x11: 0000000000000020 x10: 0000000000000003 [ 4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680 [ 4.211585] x7 : 0000000000000000 x6 : ffff80001119b588 [ 4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80 [ 4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718 [ 4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600 [ 4.233391] Call trace: [ 4.235906] rtw_load_firmware_cb+0x54/0xbc [ 4.240198] request_firmware_work_func+0x44/0xb4 [ 4.245027] process_one_work+0x178/0x1e4 [ 4.249142] worker_thread+0x1d0/0x268 [ 4.252989] kthread+0xe8/0xf8 [ 4.256127] ret_from_fork+0x10/0x18 [ 4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681) [ 4.266049] ---[ end trace f822ebae1a8545c2 ]--- To avoid this, wait on the completion callbacks in rtw_core_deinit() before releasing firmware and continuing teardown. Note that rtw_wait_firmware_completion() was introduced with c8e5695eae9959fc5774c0f490f2450be8bad3de ("rtw88: load wowlan firmware if wowlan is supported"), so backports to earlier branches may need to inline wait_for_completion(&rtwdev->fw.completion) instead. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported") Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200920132621.26468-2-afaerber@suse.de
2020-09-24brcmfmac: check return value of driver_for_each_device()Zhang Changzhong
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1576:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] 1576 | int ret; | ^~~ driver_for_each_device() has been declared with __must_check, so the return value should be checked. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1600481191-14250-1-git-send-email-zhangchangzhong@huawei.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 22:32:00 +0000