summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-04drm/amd/display: add DCN351 version identifiersHamza Mahfooz
Add DCN3.5.1 ASIC identifiers. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04Revert "drm/amdgpu: remove vm sanity check from amdgpu_vm_make_compute" for ↵Jesse Zhang
Raven fix the issue: "amdgpu: Failed to create process VM object". [Why]when amdgpu initialized, seq64 do mampping and update bo mapping in vm page table. But when clifo run. It also initializes a vm for a process device through the function kfd_process_device_init_vm and ensure the root PD is clean through the function amdgpu_vm_pt_is_root_clean. So they have a conflict, and clinfo always failed. v1: - remove all the pte_supports_ats stuff from the amdgpu_vm code (Felix) Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/xe: Replace 'grouped target' in Makefile with pattern ruleDafna Hirschfeld
Since 'grouped target' is used only in 'make' 4.3, it should be avoided. Replace it with 'multi-target pattern rule' which has the same behavior. Fixes: 9616e74b796c ("drm/xe: Add support for OOB workarounds") Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240302153927.2602241-1-dhirschfeld@habana.ai [ reword commit message ] Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 5224ed586ba7f9bba956655a1bfe5b75df7394d4) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-04drm/xe: Fix ref counting leak on page faultMatthew Brost
If a page fault occurs on VM not in fault a ref can be leaked. Fix this. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240301041036.238471-1-matthew.brost@intel.com (cherry picked from commit 27b5a3f237fe66dbf2288c2b50973aee8a427e41) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-04drm/xe: Remove obsolete async_ops from struct xe_vmMika Kuoppala
When sync binds were reworked and worker removed, async_ops became obsolete. Remove it. Fixes: f3e9b1f43458 ("drm/xe: Remove async worker and rework sync binds") Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240117110908.2362615-1-mika.kuoppala@linux.intel.com (cherry picked from commit e5f276dc1e4c6475d322bc4672c33ab74b068f3b) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-04drm/xe/guc: Fix missing topology initZhanjun Dong
init_steering_dss need topology dss mask to be init ahead. Fixed by moving xe_gt_topology_init ahead of xe_gt_mcr_init Fixes: bf8ec3c3e82c ("drm/xe: Initialize GuC earlier during probe") Cc: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240227164922.281346-2-zhanjun.dong@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 4c47049d93b7a7fc2230cded84a6aec6bbd3d61e) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-04drm/xe/xe2: fix 64-bit division in pte_update_sizeArnd Bergmann
This function does not build on 32-bit targets when the compiler fails to reduce DIV_ROUND_UP() into a shift: ld.lld: error: undefined symbol: __aeabi_uldivmod >>> referenced by xe_migrate.c >>> drivers/gpu/drm/xe/xe_migrate.o:(pte_update_size) in archive vmlinux.a There are two instances in this function. Change the first to use an open-coded shift with the same behavior, and the second one to a 32-bit calculation, which is sufficient here as the size is never more than 2^32 pages (16TB). Fixes: 237412e45390 ("drm/xe: Enable 32bits build") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240226124736.1272949-3-arnd@kernel.org Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 1408784b599927d2f361bac6dc5170d2ee275f17) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-04drm/xe/kunit: fix link failure with built-in xeArnd Bergmann
When the driver is built-in but the tests are in loadable modules, the helpers don't actually get put into the driver: ERROR: modpost: "xe_kunit_helper_alloc_xe_device" [drivers/gpu/drm/xe/tests/xe_test.ko] undefined! Change the Makefile to ensure they are always part of the driver even when the rest of the kunit tests are in loadable modules. Fixes: 5095d13d758b ("drm/xe/kunit: Define helper functions to allocate fake xe device") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240226124736.1272949-1-arnd@kernel.org Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 0e6fec6da25167a568fbaeb8401d8172069124ad) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-04drm/i915: fix applying placement flagChristian König
Switching from a separate list to flags introduced a bug here. We were accidentially ORing the flag before initailizing the placement and not after. So this code didn't do nothing except producing a warning. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: a78a8da51b36 ("drm/ttm: replace busy placement with flags v6") Link: https://patchwork.freedesktop.org/patch/msgid/20240226142759.93130-1-christian.koenig@amd.com Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # compile only Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-03-04drm/msm/dpu: capture snapshot on the first commit_done timeoutDmitry Baryshkov
In order to debug commit_done timeouts, capture the devcoredump state when the first timeout occurs after the encoder has been enabled. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579850/ Link: https://lore.kernel.org/r/20240226-fd-dpu-debug-timeout-v4-3-51eec83dde23@linaro.org
2024-03-04drm/msm/dpu: split dpu_encoder_wait_for_event into two functionsDmitry Baryshkov
Stop multiplexing several events via the dpu_encoder_wait_for_event() function. Split it into two distinct functions two allow separate handling of those events. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579848/ Link: https://lore.kernel.org/r/20240226-fd-dpu-debug-timeout-v4-2-51eec83dde23@linaro.org
2024-03-04drm/msm/dpu: make "vblank timeout" more usefulDmitry Baryshkov
We have several reports of vblank timeout messages. However after some debugging it was found that there might be different causes to that. To allow us to identify the DPU block that gets stuck, include the actual CTL_FLUSH value into the timeout message. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579849/ Link: https://lore.kernel.org/r/20240226-fd-dpu-debug-timeout-v4-1-51eec83dde23@linaro.org
2024-03-04drm/msm/dp: allow YUV420 mode for DP connector when CDM availablePaloma Arellano
All the components of YUV420 over DP are added. Therefore, let's mark the connector property as true for DP connector when the DP type is not eDP and when there is a CDM block available. Changes in v3: - Move setting the connector's ycbcr_420_allowed parameter so that it is not dependent on if the dp_display is not eDP Changes in v2: - Check for if dp_catalog has a CDM block available instead of checking if VSC SDP is allowed when setting the dp connector's ycbcr_420_allowed parameter Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579628/ Link: https://lore.kernel.org/r/20240222194025.25329-20-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dpu: reserve CDM blocks for DP if mode is YUV420Paloma Arellano
Reserve CDM blocks for DP if the mode format is YUV420. Currently this reservation only works for writeback and DP if the format is YUV420. But this can be easily extented to other YUV formats for DP. Changes in v2: - Minor code simplification Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579630/ Link: https://lore.kernel.org/r/20240222194025.25329-19-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dpu: modify timing engine programming for YUV420 over DPPaloma Arellano
Adjust the encoder timing engine setup programming in the case of video mode for YUV420 over DP to accommodate CDM. Changes in v3: - Move drm_display_mode's hskew division to another patch - Minor cleanup Changes in v2: - Move timing engine programming to this patch Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579634/ Link: https://lore.kernel.org/r/20240222194025.25329-18-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dpu: modify encoder programming for CDM over DPPaloma Arellano
Adjust the encoder format programming in the case of video mode for DP to accommodate CDM related changes. Changes in v4: - Remove hw_cdm check in dpu_encoder_needs_periph_flush() - Remove hw_cdm check when getting the fmt_fourcc in dpu_encoder_phys_vid_enable() Changes in v2: - Move timing engine programming to a separate patch from this one - Move update_pending_flush_periph() invocation completely to this patch - Change the logic of dpu_encoder_get_drm_fmt() so that it only calls drm_mode_is_420_only() instead of doing additional unnecessary checks - Create new functions msm_dp_needs_periph_flush() and it's supporting function dpu_encoder_needs_periph_flush() to check if the mode is YUV420 and VSC SDP is enabled before doing a peripheral flush Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579641/ Link: https://lore.kernel.org/r/20240222194025.25329-17-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: enable SDP and SDE periph flush updatePaloma Arellano
DP controller can be setup to operate in either SDP update flush mode or peripheral flush mode based on the DP controller hardware version. Starting in DP v1.2, the hardware documents require the use of peripheral flush mode for SDP packets such as PPS OR VSC SDP packets. In-line with this guidance, lets program the DP controller to use peripheral flush mode starting DP v1.2 Changes in v4: - Clear up that DP_MAINLINK_CTRL_FLUSH_MODE register requires the use of bits [24:23] - Modify macros DP_MAINLINK_FLUSH_MODE_UPDATE_SDP and DP_MAINLINK_FLUSH_MODE_SDP_PERIPH_UPDATE to explicitly set their values in the bits of DP_MAINLINK_CTRL_FLUSH_MODE_MASK Changes in v3: - Clear up that the DP_MAINLINK_FLUSH_MODE_SDE_PERIPH_UPDATE macro is setting bits [24:23] to a value of 3 Changes in v2: - Use the original dp_catalog_hw_revision() function to correctly check the DP HW version Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579621/ Link: https://lore.kernel.org/r/20240222194025.25329-16-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dpu: add support of new peripheral flush mechanismKuogee Hsieh
Introduce a peripheral flushing mechanism to decouple peripheral metadata flushing from timing engine related flush. Changes in v2: - Fixed some misalignment issues Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579619/ Link: https://lore.kernel.org/r/20240222194025.25329-15-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: add VSC SDP support for YUV420 over DPPaloma Arellano
Add support to pack and send the VSC SDP packet for DP. This therefore allows the transmision of format information to the sinks which is needed for YUV420 support over DP. Changes in v5: - Slightly modify use of drm_dp_vsc_sdp_pack() - Remove dp_catalog NULL checks - Modify dp_utils_pack_sdp_header() to more clearly pack the header buffer - Move dp_utils_pack_sdp_header() inside of dp_catalog_panel_send_vsc_sdp to clearly show the relationship between the header buffer and the vsc_sdp struct - Due to the last point, remove the dp_utils_pack_vsc_sdp() function and only call drm_dp_vsc_sdp_pack() in dp_panel_setup_vsc_sdp_yuv_420() Changes in v4: - Remove struct msm_dp_sdp_with_parity - Use dp_utils_pack_sdp_header() to pack the SDP header and parity bytes into a buffer - Use this buffer when writing the VSC SDP data in dp_catalog_panel_send_vsc_sdp() - Write to all of the MMSS_DP_GENERIC0 registers instead of just the ones with non-zero values Changes in v3: - Create a new struct, msm_dp_sdp_with_parity, which holds the packing information for VSC SDP - Use drm_dp_vsc_sdp_pack() to pack the data into the new msm_dp_sdp_with_parity struct instead of specifically packing for YUV420 format - Modify dp_catalog_panel_send_vsc_sdp() to send the VSC SDP data using the new msm_dp_sdp_with_parity struct Changes in v2: - Rename GENERIC0_SDPSIZE macro to GENERIC0_SDPSIZE_VALID - Remove dp_sdp from the dp_catalog struct since this data is being allocated at the point used - Create a new function in dp_utils to pack the VSC SDP data into a buffer - Create a new function that packs the SDP header bytes into a buffer. This function is made generic so that it can be utilized by dp_audio header bytes into a buffer - Create a new function in dp_utils that takes the packed buffer and writes to the DP_GENERIC0_* registers - Split the dp_catalog_panel_config_vsc_sdp() function into two to disable/enable sending VSC SDP packets - Check the DP HW version using the original useage of dp_catalog_hw_revision() and correct the version checking logic - Rename dp_panel_setup_vsc_sdp() to dp_panel_setup_vsc_sdp_yuv_420() to explicitly state that currently VSC SDP is only being set up to support YUV420 modes Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579636/ Link: https://lore.kernel.org/r/20240222194025.25329-14-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: move parity calculation to dp_utilsPaloma Arellano
Parity calculation is necessary for VSC SDP implementation. Therefore create new files dp_utils.c and dp_utils.h and move the parity calculating functions here. This ensures that they are usable by SDP programming in both dp_catalog.c and dp_audio.c Changes in v3: - Change ordering of the header byte macros Changes in v2: - Create new files dp_utils.c and dp_utils.h - Move the parity calculation to these new files instead of having them in dp_catalog.c and dp_catalog.h Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579617/ Link: https://lore.kernel.org/r/20240222194025.25329-13-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: change clock related programming for YUV420 over DPPaloma Arellano
Change all relevant DP controller related programming for YUV420 cases. Namely, change the pixel clock math to consider YUV420 and modify the MVID programming to consider YUV420. Changes in v2: - Move configuration control programming to a different commit - Slight code simplification - Add VSC SDP check when doing mode_pclk_khz division in dp_bridge_mode_valid Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579640/ Link: https://lore.kernel.org/r/20240222194025.25329-12-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: program config ctrl for YUV420 over DPPaloma Arellano
Change relevant DP controller related programming for YUV420 cases. Program the configuration control register to indicate YUV420. Changes in v2: - Create a new patch only for configuration control programming Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579615/ Link: https://lore.kernel.org/r/20240222194025.25329-11-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dpu: move widebus logic to its own APIPaloma Arellano
Widebus enablement is decided by the interfaces based on their specific checks and that already happens with DSI/DP specific helpers. Let's invoke these helpers from dpu_encoder_is_widebus_enabled() to make it cleaner overall. Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579632/ Link: https://lore.kernel.org/r/20240222194025.25329-10-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: check if VSC SDP is supported in DP programmingPaloma Arellano
In the DP driver, check if VSC SDP is supported and propagate this value to dp_panel. In dp_display's dp_mode, the out_fmt_is_yuv_420 parameter must also utilize this value since YUV420 is only allowed when VSC SDP is supported. Changes in v2: - Move DP programming when VSC SDP is supported to this patch Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579625/ Link: https://lore.kernel.org/r/20240222194025.25329-9-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: store mode YUV420 information to be used by rest of DPPaloma Arellano
Wide bus is not supported when the mode is YUV420 in DP. In preparation for changing the DPU programming to reflect this, the value and assignment location of wide_bus_en for the DP submodules must be changed. Move it from boot time in dp_init_sub_modules() to run time in dp_display_mode_set. Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579614/ Link: https://lore.kernel.org/r/20240222194025.25329-8-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: rename wide_bus_en to wide_bus_supportedPaloma Arellano
Rename wide_bus_en to wide_bus_supported in dp_display_private to correctly establish that the parameter is referencing if wide bus is supported instead of enabled. Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579613/ Link: https://lore.kernel.org/r/20240222194025.25329-7-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dpu: move dpu_encoder_helper_phys_setup_cdm to dpu_encoderPaloma Arellano
Move dpu_encoder_helper_phys_setup_cdm to dpu_encoder in preparation for implementing YUV420 over DP, which requires CDM compatibility. Changes in v2: - Slightly change the wording of the commit text to make clear that YUV over DP requires CDM Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579611/ Link: https://lore.kernel.org/r/20240222194025.25329-6-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dpu: allow dpu_encoder_helper_phys_setup_cdm to work for DPPaloma Arellano
Generalize dpu_encoder_helper_phys_setup_cdm to be compatible with DP. Changes in v2: - Minor formatting changes - Move the modification of the dimensions for CDM setup to a new patch Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579609/ Link: https://lore.kernel.org/r/20240222194025.25329-5-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dpu: pass mode dimensions instead of fb size in CDM setupPaloma Arellano
Modify the output width and height parameters of hw_cdm to utilize the physical encoder's data instead of obtaining the information from the framebuffer. CDM is to be set up to utilize the actual output data since at CDM setup, there is no difference between the two sources. Changes in v2: - Move the modification of the dimensions for CDM setup to this new patch Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579607/ Link: https://lore.kernel.org/r/20240222194025.25329-4-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dpu: add division of drm_display_mode's hskew parameterPaloma Arellano
Setting up the timing engine when the physical encoder has a split role neglects dividing the drm_display_mode's hskew parameter. Let's fix this since this must also be done in preparation for implementing YUV420 over DP. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579605/ Link: https://lore.kernel.org/r/20240222194025.25329-3-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dpu: allow certain formats for CDM for DPPaloma Arellano
CDM block supports formats other than H1V2 for DP. Since we are now adding support for CDM over DP, relax the checks to allow all other formats for DP other than H1V2. Changes in v2: - Add fixes tag - Move patch to top of series Fixes: 0afac0ba6024 ("drm/msm/dpu: add dpu_hw_cdm abstraction for CDM block") Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579606/ Link: https://lore.kernel.org/r/20240222194025.25329-2-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-03Merge tag 'drm-misc-next-2024-02-29' into msm-nextRob Clark
Merge to pick up commit 47f419e07111 ("drm/dp: move intel_dp_vsc_sdp_pack() to generic helper") drm-misc-next for v6.9: UAPI Changes: Cross-subsystem Changes: backlight: - corgi: include backlight header fbdev: - Cleanup includes in public header file - fbtft: Include backlight header Core Changes: edid: - Remove built-in EDID data dp: - Avoid AUX transfers on powered-down displays - Add VSC SDP helpers modesetting: - Add sanity checks for polling - Cleanups scheduler: - Cleanups tests: - Add helpers for mode-setting tests Driver Changes: i915: - Use shared VSC SDP helper mgag200: - Work around PCI write bursts mxsfb: - Use managed mode config nouveau: - Include backlight header where necessary qiac: - Cleanups sun4: - HDMI: updates to atomic mode setting tegra: - Fix GEM refounting in error paths tidss: - Fix multi display - Fix initial Z position v3d: - Support display MMU page size Signed-off-by: Rob Clark <robdclark@chromium.org>
2024-03-01Merge tag 'drm-misc-next-fixes-2024-02-29' of ↵Dave Airlie
https://anongit.freedesktop.org/git/drm/drm-misc into drm-next Short summary of fixes pull: i915: - Fix NULL-pointer deref imx: - dcss: Fix resource-size calculation firmware: - sysfb: Fix returned error code Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240229085331.GA25863@localhost.localdomain
2024-03-01Merge tag 'drm-msm-next-2024-02-29' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.9: Core: - Correct bindings for MSM8976 and SM8650 platforms - Start migration of MDP5 platforms to DPU driver - X1E80100 MDSS support DPU: - Improve DSC allocation, fixing several important corner cases - Add support for SDM630/SDM660 platforms - Simplify dpu_encoder_phys_ops - Apply fixes targeting DSC support with a single DSC encoder - Apply fixes for HCTL_EN timing configuration - X1E80100 support DP: - Refactor parser and power submodules DSI: - Clean up obsolete set_split_display support - Update DSC documentation MDP5: - Clean up obsolete set_split_display support GPU: - fix sc7180 UBWC config - fix a7xx LLC config - new gpu support: a305B, a750, a702 - machine support: SM7150 (different power levels than other a618) - a7xx devcoredump support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtCq=CObbqKNOswWZdPw5dL8jq8BxD_hxP7kOCePUwNrg@mail.gmail.com
2024-03-01Merge tag 'mediatek-drm-next-6.9' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 6.9 1. Add display driver for MT8188 VDOSYS1 2. DSI driver cleanups 3. Filter modes according to hardware capability 4. Fix a null pointer crash in mtk_drm_crtc_finish_page_flip Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240229162143.28957-1-chunkuang.hu@kernel.org
2024-03-01drm/sun4i: hdmi: Add missing drm_atomic headerMaxime Ripard
Commit 358e76fd613a ("drm/sun4i: hdmi: Consolidate atomic_check and mode_valid") added a call to drm_atomic_get_new_connector_state() but didn't include drm_atomic.h which defines it. On some configuration, this leads to a build failure, presumably because in the common case the header gets included by an intermediate header but it isn't always the case. Let's add a proper include. Reported-by: Dave Airlie <airlied@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402291942.zVb1Vx4Y-lkp@intel.com/ Fixes: 358e76fd613a ("drm/sun4i: hdmi: Consolidate atomic_check and mode_valid") Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240301080249.823067-1-mripard@kernel.org
2024-03-01Merge tag 'drm-misc-next-2024-02-29' of ↵Dave Airlie
https://anongit.freedesktop.org/git/drm/drm-misc into drm-next drm-misc-next for v6.9: UAPI Changes: Cross-subsystem Changes: backlight: - corgi: include backlight header fbdev: - Cleanup includes in public header file - fbtft: Include backlight header Core Changes: edid: - Remove built-in EDID data dp: - Avoid AUX transfers on powered-down displays - Add VSC SDP helpers modesetting: - Add sanity checks for polling - Cleanups scheduler: - Cleanups tests: - Add helpers for mode-setting tests Driver Changes: i915: - Use shared VSC SDP helper mgag200: - Work around PCI write bursts mxsfb: - Use managed mode config nouveau: - Include backlight header where necessary qiac: - Cleanups sun4: - HDMI: updates to atomic mode setting tegra: - Fix GEM refounting in error paths tidss: - Fix multi display - Fix initial Z position v3d: - Support display MMU page size Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240229084806.GA21616@localhost.localdomain
2024-02-29drm/amdgpu: remove misleading amdgpu_pmops_runtime_idle() commentBjorn Helgaas
After 4020c2280233 ("drm/amdgpu: don't runtime suspend if there are displays attached (v3)"), "ret" is unconditionally set later before being used, so there's point in initializing it and the associated comment is no longer meaningful. Remove the comment and the unnecessary initialization. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-29Reapply "Revert drm/amd/display: Enable Freesync Video Mode by default"Alex Deucher
This reverts commit 11b92df8a2f7f4605ccc764ce6ae4a72760674df. This conflicts with how compositors want to handle VRR. Now that compositors actually handle VRR, we probably don't need freesync video. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2985 Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-29Revert "drm/amd: Remove freesync video mode amdgpu parameter"Alex Deucher
This reverts commit e94e787e37b99645e7c02d20d0a1ba0f8a18a82a. This conflicts with how compositors want to handle VRR. Now that compositors actually handle VRR, we probably don't need freesync video. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2985 Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-29drm/amd/display: check dc_link before dereferencingMelissa Wen
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6683 amdgpu_dm_connector_funcs_force() warn: variable dereferenced before check 'dc_link' (see line 6663) Fixes: 967176179215 ("drm/amd/display: fix null-pointer dereference on edid reading") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-29drm/amdgpu: add deferred error check for UMC v12 address queryTao Zhou
Both RAS UE and deferred errors need page retirement. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-29drm/amd/swsmu: modify the gfx activity scalingLi Ma
Add an if condition for gfx activity because the scaling has been changed after smu fw version 5d4600. And remove a warning log. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-01Merge tag 'drm-intel-gt-next-2024-02-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: Fixes: - Add some boring kerneldoc (Tvrtko Ursulin) - Check before removing mm notifier (Nirmoy Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zd889Wvu/ZKZSK4/@tursulin-desk
2024-02-29drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flipHsin-Yi Wang
It's possible that mtk_crtc->event is NULL in mtk_drm_crtc_finish_page_flip(). pending_needs_vblank value is set by mtk_crtc->event, but in mtk_drm_crtc_atomic_flush(), it's is not guarded by the same lock in mtk_drm_finish_page_flip(), thus a race condition happens. Consider the following case: CPU1 CPU2 step 1: mtk_drm_crtc_atomic_begin() mtk_crtc->event is not null, step 1: mtk_drm_crtc_atomic_flush: mtk_drm_crtc_update_config( !!mtk_crtc->event) step 2: mtk_crtc_ddp_irq -> mtk_drm_finish_page_flip: lock mtk_crtc->event set to null, pending_needs_vblank set to false unlock pending_needs_vblank set to true, step 2: mtk_crtc_ddp_irq -> mtk_drm_finish_page_flip called again, pending_needs_vblank is still true //null pointer Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more efficient to just check if mtk_crtc->event is null before use. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240223212404.3709690-1-hsinyi@chromium.org/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-02-28amd/amdkfd: remove unused parameterEric Huang
The adev can be found from bo by amdgpu_ttm_adev(bo->tbo.bdev), and adev is also not used in the function amdgpu_amdkfd_map_gtt_bo_to_gart(). Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-28drm/amd/pm: Fix esm reg mask use to get pcie speedAsad Kamal
Fix mask used for esm ctrl register to get pcie link speed on smu_v11_0_3, smu_v13_0_2 & smu_v13_0_6 Fixes: 511a95552ec8 ("drm/amd/pm: Add SMU 13.0.6 support") Fixes: c05d1c401572 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)") Fixes: f1c378593153 ("drm/amd/powerplay: add Arcturus support for gpu metrics export") Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-28drm/amd/pm: Skip reporting pcie width/speed on vfsAsad Kamal
Skip reporting pcie link width/speed on vfs for smu_v13_0_6 & smu_v13_0_2 Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-28drm/amdgpu: enable pp_od_clk_voltage for gfx 9.4.3 SRIOVYang Wang
v1: enabel pp_od_clk_voltage node for gfx 9.4.3 SRIOV and BM. v2: add onevf check for gfx 9.4.3 v3: refine code check order to make function clearly. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-28drm/dp: Don't attempt AUX transfers when eDP panels are not poweredDouglas Anderson
If an eDP panel is not powered on then any attempts to talk to it over the DP AUX channel will timeout. Unfortunately these attempts may be quite slow. Userspace can initiate these attempts either via a /dev/drm_dp_auxN device or via the created i2c device. Making the DP AUX drivers timeout faster is a difficult proposition. In theory we could just poll the panel's HPD line in the AUX transfer function and immediately return an error there. However, this is easier said than done. For one thing, there's no hard requirement to hook the HPD line up for eDP panels and it's OK to just delay a fixed amount. For another thing, the HPD line may not be fast to probe. On parade-ps8640 we need to wait for the bridge chip's firmware to boot before we can get the HPD line and this is a slow process. The fact that the transfers are taking so long to timeout is causing real problems. The open source fwupd daemon sometimes scans DP busses looking for devices whose firmware need updating. If it happens to scan while a panel is turned off this scan can take a long time. The fwupd daemon could try to be smarter and only scan when eDP panels are turned on, but we can also improve the behavior in the kernel. Let's let eDP panels drivers specify that a panel is turned off and then modify the common AUX transfer code not to attempt a transfer in this case. Tested-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Eizan Miyamoto <eizan@chromium.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240202141109.1.I24277520ac754ea538c9b14578edc94e1df11b48@changeid
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 10:29:07 +0000