Age | Commit message (Collapse) | Author |
|
We'll have devices that are EHT capable but don't support 320 MHz and
those devices look like the 320 MHz capable devices, but have distinct
subsystem ID.
We already had the same type of differentiation for HE devices that
support 160 MHz or not.
Enhance that mechanism and now the _IWL_DEV_INFO macro gets an
indication whether the bandwidth should be limited for that specific
device.
The subsystem ID gives a binary answer about the bandwidth limitation
and iwl_pci_find_dev_info() compares this to the list of _IWL_DEV_INFO
entries.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.1ba406c538a5.I6e24123f60a764aedfeaaac8768c26e136c320cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Re-probing if we had 2 firmware crash within 3 minutes is really too
aggressive. Drastically reduce the threshold to 7 seconds.
After 7 seconds, a new firmware crash will be considered "new" and not
cause a PCI re-probe.
This allows to pass tests that cause a firmware crash every 10 seconds
and expect to see no impact on the traffic.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.38f912b047f4.I03f0c10ae9e7ecea639431f3e089b757cc8a4347@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It's only used in the same file, so can be static.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.319b66c00676.I3c06d6c2ee5850a5a89feff7d770e557fd625a6d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As MLO link configuration is supported by mac80211, indicate
support for MLO link reconfiguration in station mode.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
----------------
depends on "wifi: ieee80211: Add some missing MLO related definitions"
Link: https://patch.msgid.link/20250205145347.92d19705d2b9.Id07fa3ebad6bc23ecf6e91868f67150ce70f47b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Indicate support for EPCS and unsolicited EPCS in the EHT MAC
capabilities.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.6b1c7cc8a958.Idd72ea53f70eb452d43d99e6c45ff21f891100bd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We're adding a new IWLMLD opmode for just BZ and later
devices. If that's enabled but IWLMVM isn't, the build
fails because 22000 family configs aren't built but BZ
and later refer to it. Rather than trying to make some
new file to build it in all cases, just copy the small
struct.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.1d6186c23bee.I3c61a6c9e0db3ba6eea4dac63e1547945ad01703@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Despite not being able to sustain the full 320 MHz throughput
even at MCS 9, enable 320 MHz on slow PCIe links. This may in
some cases result in frames being dropped (on the air) by the
firmware if they cannot be delivered to the host, but it can
still be better to use 320 MHz.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.1e5356a3b124.I1224023721aaeff8ebcaa47dff88613c7fd0533a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
During reprobe, the sw state is being destroyd, and so is the
connection. When the peer STA is being removed, the opmode sends a
command to flush the TXQs of the STA and uses iwl_trans_wait_txq_empty.
This one warns if the FW is not alive, but it really shouldn't if
there is a FW error - and return silently instead, just like we do when
sending a hcmd.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250205145347.76425b10e5a0.I3bf0de2eb090a8b94c4e36d93dd91df61fadb808@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Created a common function iwl_add_mcc_to_tas_block_list() to handle the
operations previously performed by iwl_mld_add_to_tas_block_list() and
iwl_mvm_add_to_tas_block_list(). moved this new function to regulatory.c
to better reflect its purpose and improve code organization.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.157d26fb7f02.I87e20e967835bc895be390daf1c6637e20b52aae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_rfi_is_enabled_in_bios()
Renamed iwl_mvm_eval_dsm_rfi() to iwl_rfi_is_enabled_in_bios() to better
reflect the function's operation. Additionally, moved the function to the
regulatory.c file for better organization. optimize local variable
usage in it.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.b7ac9d05234e.Ieb623d7e8dca6bb6a5733682b31e4ff1e39373f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://wireless.wiki.kernel.org site now redirects to
https://wireless.docs.kernel.org/en/latest/ making the reference
information for the b43 firmware inaccessible. Update the URL to the
current location.
Link: https://bugs.debian.org/1095062
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Acked-by: Michael Büsch <m@bues.ch>
Link: https://patch.msgid.link/20250205110614.216958-1-carnil@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we disassociate we may need to send a deauth frame.
Regardless of this decision, we need to flush the queues to drop all the
packets on the Tx queues.
The flow looks like this:
1) Flush packets waiting on the queues (drop=true)
2) Prepare Tx to send the deauth
3) Build the deauth header
4) send the deauth
5) Flush the deauth packet (drop=false)
6) Complete_tx
Step 3 and 4 are done in ieee80211_send_deauth_disassoc() and that
function must be called even if we decide not to send the deauth
frame because we need step 3 for cfg80211.
This means that if we want to send the deauth frame, we need all the
steps, but if we don't want to send the deauth frame we still want step
1 and 3.
Change the code to do that.
Also, prevent sending the deauth frame if we are in the middle of a CSA
with mode=1 in which case we won't be able to send the frame anyway.
This caused issues in iwlwifi at step 5 since the firmware wouldn't
send the frame and we'd be stuck flushing with drop=false.
Implement this in ieee80211_set_disassoc() which has many callers.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.480bfea605e0.I91131eed942e49b9885d73f4180a3c9c26691c62@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This wiphy work is canceled when the iface is stopped,
and shouldn't be queued for a non-running iface.
If it happens to be queued for a non-running iface (due to a bug)
it can cause a corruption of wiphy_work_list when ieee80211_setup_sdata
is called. Make sure to cancel it in this case and warn on.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250205110958.99204c767c10.I84ce27a239059f6009cee197b252549a11426046@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With the previous patch to no longer access deflink for aggregation
it seems we no longer access the deflink for MLO stations (MLDs) so
we can allow removing the assoc link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.05bc2175cea2.I8f62609a682fdf3f703872d0fce63ab6a4780a7e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a station has connected with MLO (as indicated by valid_links
being non-zero, even if that may have just a single bit set), it
necessarily supports EHT/aggregation, so we don't need to check
the deflink for those cases.
Add conditions so we can support removing the link it/we used to
associate on.
Note that we still use the statistics in the deflink, but that's
a whole different story we will need to address separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.daf2a9e367f2.Id2c2dfbbe7451cc900ed88c5a81b33c55b4ab1cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Instead of only sending the correct number for EHT and up,
always send the correct number as it should be in strict
mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.5910263db6da.Icd1f93fabc9705e4e760d834095c29b60b934d9e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We might not have called drv_mgd_prepare_tx(), so only call
drv_mgd_complete_tx() under the same conditions.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.e091fc39a351.Ie6a3cdca070612a0aa4b3c6914ab9ed602d1f456@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the original commit 15fae3410f1d ("mac80211: notify driver on
mgd TX completion") I evidently made a mistake and placed the
call in the "associated" if, rather than the "assoc_data". Later
I noticed the missing call and placed it in commit c042600c17d8
("wifi: mac80211: adding missing drv_mgd_complete_tx() call"),
but didn't remove the wrong one. Remove it now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6ed954179bbf.Id8ef8835b7e6da3bf913c76f77d201017dc8a3c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This will be used by the low level driver.
Note that link_id will be 0 in case of a non-MLO authentication.
Also fix a call-site of mgd_prepare_tx() where the link_id was not
populated.
Update the documentation to reflect the current state
ieee80211_prep_tx_info::link_id is also available in mgd_complete_tx().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6a590f189ce5.I1fc5c0da26b143f5b07191eb592f01f7083d55ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a few tests for ieee80211_determine_chan_mode that check that
mac80211 will not try to connect to an AP if an advertised basic rate is
not supported.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.530c81eb7fdc.Ia77f5efdf9efb70d2766a3d6bf425553bcb308e8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
So far we did not verify the HT and VHT basic MCS set. However, in
P802.11REVme/D7.0 (6.5.4.2.4) says that the MLME-JOIN.request shall
return an error if the VHT and HT basic set requirements are not met.
Given broken APs, apply VHT basic MCS/NSS set checks only in
strict mode.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.e2d8d4095f6b.I66bcf6c2de3b9d3325e4ffd9f573f4cd26ce5685@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since we use hwsim for testing e.g. the hostapd implementation,
enable strict mode to catch errors that would otherwise not be
caught.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.85bee694f09c.I61ec37d20fe97699d47fce252dc4ae2e4475fc51@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a strict mode where we disable certain workarounds and have
additional checks such as, for now, that VHT capabilities from
association response match those from beacon/probe response. We
can extend the checks in the future.
Make it an opt-in setting by the driver so it can be set there
in some driver-specific way, for example. Also allow setting
this one hw flag through the hwflags debugfs, by writing a new
strict=0 or strict=1 value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.5cecb0469479.I4a69617dc60ba0d6308416ffbc3102cfd08ba068@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add processing of negotiated TTLM tear down frame.
Handle this frame similar to the way a locally initiated
tear down is handled.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.860691076786.I32df71182c25c5f84e4534f40efe1316926b8249@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add missing EHT MAC capabilities definitions.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6c1643c345a1.I7405b9c35cb39ae97a52c3fbcc36b0bd81e495dc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for configuring EPCS state:
- When EPCS is enabled, send an EPCS enable request action frame
to the AP. When the AP replies with EPCS enable response, enable
EPCS by applying the QoS parameters provided by the AP. Do so for
all the valid MLD links. Once EPCS is enabled, support processing
of unsolicited EPCS enable response frames.
- When EPCS is disabled, send an EPCS teardown request to the AP
and apply the QoS parameters as obtained from the last received
beacons. Do so for all the valid links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.7a90afd7e140.I3f602d65f5c1fd849d6c70b12307dda33aa91ccb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function first updates the link configuration and then
calls the driver to set the link parameters. Since the call
to the driver might sleep, split the function such that
the link configuration could be done without calling the
driver. This would be useful in cases that WMM parameters
need to be configured, but the current locking doesn't allow
to call the driver.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.b1cedcf93763.I65783c102d44127035838f97fab64ec4df5c40f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Print the mask of removed links in hexadecimal.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.1dd2831cab5f.Ib9f5e82286f0352cd057b4bf76737223e9de8274@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of other structs, we use the `__struct_group()` helper to
create a new tagged `struct qlink_tlv_hdr_fixed`. This structure
groups together all the members of the flexible `struct qlink_tlv_hdr`
except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct member currently causing
trouble from `struct qlink_tlv_hdr` to `struct qlink_tlv_hdr_fixed`.
We also want to ensure that when new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that
the memory layout for both the flexible structure and the new tagged
struct is the same after any changes.
This approach avoids having to implement `struct qlink_tlv_hdr_fixed`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
So, with this changes, fix 66 of the following warnings:
drivers/net/wireless/quantenna/qtnfmac/qlink.h:1681:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/quantenna/qtnfmac/qlink.h:1660:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/quantenna/qtnfmac/qlink.h:1646:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/quantenna/qtnfmac/qlink.h:1621:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/quantenna/qtnfmac/qlink.h:1609:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/quantenna/qtnfmac/qlink.h:1570:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/Z6K0Nd_IprrhS6pn@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Hostapd switched from cooked monitor interfaces to nl80211 Dec 2011.
Drop support for the outdated cooked monitor interfaces and fix
creating the virtual monitor interfaces in the following cases:
1) We have one non-monitor and one monitor interface with
%MONITOR_FLAG_ACTIVE enabled and then delete the non-monitor
interface.
2) We only have monitor interfaces enabled on resume while at least one
has %MONITOR_FLAG_ACTIVE set.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-2-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Unconditionally start to refuse creating cooked monitor interfaces to
phase them out.
There is no feature flag for drivers to opt-in for cooked monitor and
all known users are using/preferring the modern API since the hostapd
release 1.0 in May 2012.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The last use of mwifiex_uap_del_sta_data() was removed in 2014 by
commit dda9ddeb2638 ("mwifiex: do not delete station entries in del_sta
handler")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250204012512.390209-1-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There is a spelling mistake in a IPW_DEBUG_INFO message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250202220659.199341-1-colin.i.king@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is a firmware command and is not specific to the iwlmvm op_mode
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250119210104.276658439163.I70641851f9e5210ec3a7033db38a45d24814083b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
No need to carry the version number in the structure name if this is the
latest version available.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250119210104.9d218a5c4f6b.I9de3e424be48d66994cde3684ce7e9e99456067d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This command is not specific to iwlmvm.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250119210104.04f3afcf9c77.Ic2b6f265d0b4aea25ccc7114d6f48afa621871be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
By default, rfkill state is unblocked and this behavior is not
configurable. Add support for booting in blocked state based on the
presence of a devicetree property.
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Link: https://patch.msgid.link/20250116084702.3473176-2-catalin.popescu@leica-geosystems.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
By default, rfkill state is set to unblocked. Sometimes, we want to boot
in blocked state and let the application unblock the rfkill.
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250116084702.3473176-1-catalin.popescu@leica-geosystems.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The last use of iwl_ax204_name[], iwl_ax221_name[] and iwl_cfg_so_a0_ms_a0
was removed by
commit f473a7fd6d60 ("wifi: iwlwifi: remove devices that never came out")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-7-linux@treblig.org
|
|
iwl_bz_name[] has been unused since the resent
commit 6795a37161fb ("wifi: iwlwifi: Print a specific device name.")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-6-linux@treblig.org
|
|
iwl_mvm_ftm_add_pasn_sta() was added in 2020 by
commit 0739a7d70e00 ("iwlwifi: mvm: initiator: add option for adding a
PASN responder")
but hasn't been used.
Remove it.
That was the only caller of iwl_mvm_ftm_remove_pasn_sta().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-5-linux@treblig.org
|
|
iwl_mvm_ftm_respoder_add_pasn_sta() and
iwl_mvm_ftm_resp_remove_pasn_sta() were added in 2020 by
commit be82ecd3a5c8 ("iwlwifi: mvm: add an option to add PASN station")
but have remained unused.
Remove them.
After that removal iwl_mvm_add_pasn_sta() is now unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-4-linux@treblig.org
|
|
iwl_mvm_rx_missed_vap_notif() was added in 2019 by
commit 449a29d0fead ("iwlwifi: mvm: add notification for missed VAP")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-3-linux@treblig.org
|
|
iwl_rx_ant_restriction() was added in 2009 by
commit 46f9381aa3fb ("iwlwifi: Thermal Throttling Management - part 2")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-2-linux@treblig.org
|
|
libipw_rx_any() was added in 2006 by commit 1a995b45a528 ("[PATCH]
ieee80211_rx_any: filter out packets, call ieee80211_rx or ieee80211_rx_mgt")
as ieee80211_rx_any but is currently unused and I can't find any sign it was
used under either name.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250122022240.456198-1-linux@treblig.org
|
|
With the recent removal of the uncalled
lbs_(enter|exit)_auto_deep_sleep()
functions, it's no longer possible to set
priv->is_auto_deep_sleep_enabled
so we can remove all tests of it and the variable itself.
With that gone, priv->wakeup_dev_required also doesn't
get set, so we can remove any testing of it.
Now the timer itself, and the function it calls goes.
The timer used the apparently unset auto_deep_sleep_timeout
member, which can also go.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250121013300.433538-4-linux@treblig.org
|
|
lbs_get_snmp_mib(), lbs_set_power_adapt_cfg(), lbs_set_tpc_cfg()
and lbs_set_tx_power() have been unused since 2010's
commit e86dc1ca4676 ("Libertas: cfg80211 support").
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250121013300.433538-3-linux@treblig.org
|
|
lbs_data_rate_to_fw_index(), lbs_enter_auto_deep_sleep() and
lbs_exit_auto_deep_sleep() last use was removed in 2010 by
commit e86dc1ca4676 ("Libertas: cfg80211 support").
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250121013300.433538-2-linux@treblig.org
|
|
'struct mwifiex_if_ops' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
61439 4367 32 65838 1012e drivers/net/wireless/marvell/mwifiex/pcie.o
After:
=====
text data bss dec hex filename
61699 4127 32 65858 10142 drivers/net/wireless/marvell/mwifiex/pcie.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/03d524b72f20a0302e4de5e0ebdc20ab69469dec.1737308889.git.christophe.jaillet@wanadoo.fr
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Reorder includes for distributed-arp-table.c, by Sven Eckelmann
- Fix translation table change handling, by Remi Pommarel (2 patches)
- Map VID 0 to untagged TT VLAN, by Sven Eckelmann
- Update MAINTAINERS/mailmap e-mail addresses, by the respective authors
(4 patches)
- netlink: reduce duplicate code by returning interfaces,
by Linus Lüssing
* tag 'batadv-next-pullrequest-20250117' of git://git.open-mesh.org/linux-merge:
batman-adv: netlink: reduce duplicate code by returning interfaces
MAINTAINERS: mailmap: add entries for Antonio Quartulli
mailmap: add entries for Sven Eckelmann
mailmap: add entries for Simon Wunderlich
MAINTAINERS: update email address of Marek Linder
batman-adv: Map VID 0 to untagged TT VLAN
batman-adv: Don't keep redundant TT change events
batman-adv: Remove atomic usage for tt.local_changes
batman-adv: Reorder includes for distributed-arp-table.c
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250117123910.219278-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|