summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-15x86: Fix early boot crash on gcc-10, third tryBorislav Petkov
... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org
2020-05-15MAINTAINERS: add maintainer for mediatek i2c controller driverQii Wang
Add Qii Wang as maintainer for mediatek i2c controller driver. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: mux: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: mux: demux-pinctrl: Fix an error handling path in ↵Christophe JAILLET
'i2c_demux_pinctrl_probe()' A call to 'i2c_demux_deactivate_master()' is missing in the error handling path, as already done in the remove function. Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: altera: Fix race between xfer_msg and isr threadAtsushi Nemoto
Use a mutex to protect access to idev->msg_len, idev->buf, etc. which are modified by both altr_i2c_xfer_msg() and altr_i2c_isr(). This is the minimal fix for easy backporting. A cleanup to remove the spinlock will be added later. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> [wsa: updated commit message] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: algo-pca: update contact emailWolfram Sang
The 'pengutronix' address is defunct for years. Use the proper contact address. Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: at91: Fix pinmux after devm_gpiod_get() for bus recoveryCodrin Ciubotariu
devm_gpiod_get() usually calls gpio_request_enable() for non-strict pinmux drivers. These puts the pins in GPIO mode, whithout notifying the pinctrl driver. At this point, the I2C bus no longer owns the pins. To mux the pins back to the I2C bus, we use the pinctrl driver to change the state of the pins to GPIO, before using devm_gpiod_get(). After the pins are received as GPIOs, we switch theer pinctrl state back to the default one, Fixes: d3d3fdcc4c90 ("i2c: at91: implement i2c bus recovery") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39Ricardo Cañuelo
Remove the adi,input-style and adi,input-justification properties of hdmi@39 to make it compliant with the "adi,adv7511w" DT binding. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200511110611.3142-6-ricardo.canuelo@collabora.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-15ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindingsRicardo Cañuelo
Small fixes to make these DTs compliant with the adi,adv7511w and adi,adv7513 bindings: r8a7745-iwg22d-sodimm-dbhd-ca.dts r8a7790-lager.dts r8a7790-stout.dts r8a7791-koelsch.dts r8a7791-porter.dts r8a7792-blanche.dts r8a7793-gose.dts r8a7794-silk.dts: Remove the adi,input-style and adi,input-justification properties. r8a7792-wheat.dts: Reorder the I2C slave addresses of hdmi@3d and hdmi@39 and remove the adi,input-style and adi,input-justification properties. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200511110611.3142-3-ricardo.canuelo@collabora.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-15arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindingsRicardo Cañuelo
Small fixes to make these DTs compliant with the adi,adv7511w binding. r8a77970-eagle.dts, r8a77970-v3msk.dts, r8a77980-condor.dts, r8a77980-v3hsk.dts, r8a77990-ebisu.dts: Remove the adi,input-style and adi,input-justification properties. r8a77995-draak.dts: Reorder the I2C slave addresses of the hdmi-encoder@39 node and remove the adi,input-style and adi,input-justification properties. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200511110611.3142-2-ricardo.canuelo@collabora.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-15x86/unwind/orc: Fix error handling in __unwind_start()Josh Poimboeuf
The unwind_state 'error' field is used to inform the reliable unwinding code that the stack trace can't be trusted. Set this field for all errors in __unwind_start(). Also, move the zeroing out of the unwind_state struct to before the ORC table initialization check, to prevent the caller from reading uninitialized data if the ORC table is corrupted. Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces") Fixes: d3a09104018c ("x86/unwinder/orc: Dont bail on stack overflow") Fixes: 98d0c8ebf77e ("x86/unwind/orc: Prevent unwinding before ORC initialization") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com
2020-05-15Merge tag 'drm-misc-fixes-2020-05-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Just one meson patch this time to propagate an error code Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200514073538.wvdtv5s2mt4wdrdj@gilmour.lan
2020-05-15dmaengine: ti: k3-udma: Fix TR mode flags for slave_sg and memcpyPeter Ujfalusi
cppi5_tr_csf_set() clears previously set Configuration Specific Flags. Setting the EOP flag clears the SUPR_EVT flag for the last TR which is not desirable as we do not want to have events from the TR. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200512134531.5742-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-15dmaengine: zynqmp_dma: Move list_del inside zynqmp_dma_free_descriptor.Rafał Hibner
List elements are not formally removed from list during zynqmp_dma_reset. Signed-off-by: Rafal Hibner <rafal.hibner@secom.com.pl> Link: https://lore.kernel.org/r/20200506102844.2259-1-rafal.hibner@secom.com.pl Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-15Merge tag 'drm-intel-fixes-2020-05-13-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Handle idling during i915_gem_evict_something busy loops (Chris) - Mark current submissions with a weak-dependency (Chris) - Propagate errror from completed fences (Chris) - Fixes on execlist to avoid GPU hang situation (Chris) - Fixes couple deadlocks (Chris) - Timeslice preemption fixes (Chris) - Fix Display Port interrupt handling on Tiger Lake (Imre) - Reduce debug noise around Frame Buffer Compression +(Peter) - Fix logic around IPC W/a for Coffee Lake and Kaby Lake +(Sultan) - Avoid dereferencing a dead context (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200514040235.GA2164266@intel.com
2020-05-14MAINTAINERS: Mark networking drivers as Maintained.David S. Miller
Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ipmr: Add lockdep expression to ipmr_for_each_table macroAmol Grover
During the initialization process, ipmr_new_table() is called to create new tables which in turn calls ipmr_get_table() which traverses net->ipv4.mr_tables without holding the writer lock. However, this is safe to do so as no tables exist at this time. Hence add a suitable lockdep expression to silence the following false-positive warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc3-next-20200428-syzkaller #0 Not tainted ----------------------------- net/ipv4/ipmr.c:136 RCU-list traversed in non-reader section!! ipmr_get_table+0x130/0x160 net/ipv4/ipmr.c:136 ipmr_new_table net/ipv4/ipmr.c:403 [inline] ipmr_rules_init net/ipv4/ipmr.c:248 [inline] ipmr_net_init+0x133/0x430 net/ipv4/ipmr.c:3089 Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Reported-by: syzbot+1519f497f2f9f08183c6@syzkaller.appspotmail.com Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ipmr: Fix RCU list debugging warningAmol Grover
ipmr_for_each_table() macro uses list_for_each_entry_rcu() for traversing outside of an RCU read side critical section but under the protection of rtnl_mutex. Hence, add the corresponding lockdep expression to silence the following false-positive warning at boot: [ 4.319347] ============================= [ 4.319349] WARNING: suspicious RCU usage [ 4.319351] 5.5.4-stable #17 Tainted: G E [ 4.319352] ----------------------------- [ 4.319354] net/ipv4/ipmr.c:1757 RCU-list traversed in non-reader section!! Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.cMadhuparna Bhowmik
This patch fixes the following warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc5-next-20200514-syzkaller #0 Not tainted ----------------------------- drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!! Since rtnl lock is held, pass this cond in list_for_each_entry_rcu(). Reported-by: syzbot+bb82cafc737c002d11ca@syzkaller.appspotmail.com Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810Kevin Lo
Set the correct bit when checking for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54810 PHY. Fixes: 0ececcfc9267 ("net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14scsi: target: Put lun_ref at end of tmr processingBodo Stroesser
Testing with Loopback I found that, after a Loopback LUN has executed a TMR, I can no longer unlink the LUN. The rm command hangs in transport_clear_lun_ref() at wait_for_completion(&lun->lun_shutdown_comp) The reason is, that transport_lun_remove_cmd() is not called at the end of target_tmr_work(). It seems, that in other fabrics this call happens implicitly when the fabric drivers call transport_generic_free_cmd() during their ->queue_tm_rsp(). Unfortunately Loopback seems to not comply to the common way of calling transport_generic_free_cmd() from ->queue_*(). Instead it calls transport_generic_free_cmd() from its ->check_stop_free() only. But the ->check_stop_free() is called by transport_cmd_check_stop_to_fabric() after it has reset the se_cmd->se_lun pointer. Therefore the following transport_generic_free_cmd() skips the transport_lun_remove_cmd(). So this patch re-adds the transport_lun_remove_cmd() at the end of target_tmr_work(), which was removed during commit 2c9fa49e100f ("scsi: target/core: Make ABORT and LUN RESET handling synchronous"). For fabrics using transport_generic_free_cmd() in the usual way the double call to transport_lun_remove_cmd() doesn't harm, as transport_lun_remove_cmd() checks for this situation and does not release lun_ref twice. Link: https://lore.kernel.org/r/20200513153443.3554-1-bstroesser@ts.fujitsu.com Fixes: 2c9fa49e100f ("scsi: target/core: Make ABORT and LUN RESET handling synchronous") Cc: stable@vger.kernel.org Tested-by: Bryant G. Ly <bryangly@gmail.com> Reviewed-by: Bart van Assche <bvanassche@acm.org> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-14evm: Fix a small race in init_desc()Dan Carpenter
The IS_ERR_OR_NULL() function has two conditions and if we got really unlucky we could hit a race where "ptr" started as an error pointer and then was set to NULL. Both conditions would be false even though the pointer at the end was NULL. This patch fixes the problem by ensuring that "*tfm" can only be NULL or valid. I have introduced a "tmp_tfm" variable to make that work. I also reversed a condition and pulled the code in one tab. Reported-by: Roberto Sassu <roberto.sassu@huawei.com> Fixes: 53de3b080d5e ("evm: Check also if *tfm is an error pointer in init_desc()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Roberto Sassu <roberto.sassu@huawei.com> Acked-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-05-14cifs: fix leaked reference on requeued writeAdam McCoy
Failed async writes that are requeued may not clean up a refcount on the file, which can result in a leaked open. This scenario arises very reliably when using persistent handles and a reconnect occurs while writing. cifs_writev_requeue only releases the reference if the write fails (rc != 0). The server->ops->async_writev operation will take its own reference, so the initial reference can always be released. Signed-off-by: Adam McCoy <adam@forsedomani.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2020-05-14NFSv3: fix rpc receive buffer size for MOUNT callOlga Kornievskaia
Prior to commit e3d3ab64dd66 ("SUNRPC: Use au_rslack when computing reply buffer size"), there was enough slack in the reply buffer to commodate filehandles of size 60bytes. However, the real problem was that the reply buffer size for the MOUNT operation was not correctly calculated. Received buffer size used the filehandle size for NFSv2 (32bytes) which is much smaller than the allowed filehandle size for the v3 mounts. Fix the reply buffer size (decode arguments size) for the MNT command. Fixes: 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-05-14tcp: fix error recovery in tcp_zerocopy_receive()Eric Dumazet
If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE operation we want to return -EINVAL error. But depending on zc->recv_skip_hint content, we might return -EIO error if the socket has SOCK_DONE set. Make sure to return -EINVAL in this case. BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177 __do_sys_getsockopt net/socket.c:2192 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829 RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009 RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4 Local variable ----zc@do_tcp_getsockopt created at: do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ARC: show_regs: avoid extra line of outputVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-05-14s390/kexec_file: fix initrd location for kdump kernelPhilipp Rudo
initrd_start must not point at the location the initrd is loaded into the crashkernel memory but at the location it will be after the crashkernel memory is swapped with the memory at 0. Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader") Reported-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Tested-by: Lianbo Jiang <lijiang@redhat.com> Link: https://lore.kernel.org/r/20200512193956.15ae3f23@laptop2-ibm.local Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-14s390/pci: Fix s390_mmio_read/write with MIONiklas Schnelle
The s390_mmio_read/write syscalls are currently broken when running with MIO. The new pcistb_mio/pcstg_mio/pcilg_mio instructions are executed similiarly to normal load/store instructions and do address translation in the current address space. That means inside the kernel they are aware of mappings into kernel address space while outside the kernel they use user space mappings (usually created through mmap'ing a PCI device file). Now when existing user space applications use the s390_pci_mmio_write and s390_pci_mmio_read syscalls, they pass I/O addresses that are mapped into user space so as to be usable with the new instructions without needing a syscall. Accessing these addresses with the old instructions as done currently leads to a kernel panic. Also, for such a user space mapping there may not exist an equivalent kernel space mapping which means we can't just use the new instructions in kernel space. Instead of replicating user mappings in the kernel which then might collide with other mappings, we can conceptually execute the new instructions as if executed by the user space application using the secondary address space. This even allows us to directly store to the user pointer without the need for copy_to/from_user(). Cc: stable@vger.kernel.org Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-14char: ipmi: convert to use i2c_new_client_device()Wolfram Sang
Move away from the deprecated API. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Message-Id: <20200326210958.13051-2-wsa+renesas@sang-engineering.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-05-14SUNRPC: 'Directory with parent 'rpc_clnt' already present!'J. Bruce Fields
Each rpc_client has a cl_clid which is allocated from a global ida, and a debugfs directory which is named after cl_clid. We're releasing the cl_clid before we free the debugfs directory named after it. As soon as the cl_clid is released, that value is available for another newly created client. That leaves a window where another client may attempt to create a new debugfs directory with the same name as the not-yet-deleted debugfs directory from the dying client. Symptoms are log messages like Directory 4 with parent 'rpc_clnt' already present! Fixes: 7c4310ff5642 "SUNRPC: defer slow parts of rpc_free_client() to a workqueue." Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-05-14Merge tag 'mmc-v5.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix a couple of quite severe issues for the CQE request path MMC host: - alcor: Fix a resource leak in the error path for ->probe() - sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant - sdhci-pci-gli: Fix system resume support for GL975x - sdhci-pci-gli: Fix reboot error for GL9750" * tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040 mmc: block: Fix request completion in the CQE timeout path mmc: core: Fix recursive locking issue in CQE recovery path mmc: core: Check request type before completing the request mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10 mmc: alcor: Fix a resource leak in the error path for ->probe() mmc: sdhci-pci-gli: Fix no irq handler from suspend
2020-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix gcc-10 compilation warning in nf_conntrack, from Arnd Bergmann. 2) Add NF_FLOW_HW_PENDING to avoid races between stats and deletion commands, from Paul Blakey. 3) Remove WQ_MEM_RECLAIM from the offload workqueue, from Roi Dayan. 4) Infinite loop when removing nf_conntrack module, from Florian Westphal. 5) Set NF_FLOW_TEARDOWN bit on expiration to avoid races when refreshing the timeout from the software path. 6) Missing nft_set_elem_expired() check in the rbtree, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14MAINTAINERS: Add Jakub to networking drivers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14MAINTAINERS: another add of Karsten Graul for S390 networkingUrsula Braun
Complete adding of Karsten as maintainer for all S390 networking parts in the kernel. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14drivers: ipa: fix typos for ipa_smp2p structure docWang Wenhu
Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I recommend it's easier for understanding to make the "ready-interrupt" a bundle for it is a parallel description as "shutdown" which is appended after the slash. Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Cc: Alex Elder <elder@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14pppoe: only process PADT targeted at local interfacesGuillaume Nault
We don't want to disconnect a session because of a stray PADT arriving while the interface is in promiscuous mode. Furthermore, multicast and broadcast packets make no sense here, so only PACKET_HOST is accepted. Reported-by: David Balažic <xerces9@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14selftests/bpf: Enforce returning 0 for fentry/fexit programsYonghong Song
There are a few fentry/fexit programs returning non-0. The tests with these programs will break with the previous patch which enfoced return-0 rules. Fix them properly. Fixes: ac065870d928 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200514053207.1298479-1-yhs@fb.com
2020-05-14bpf: Enforce returning 0 for fentry/fexit progsYonghong Song
Currently, tracing/fentry and tracing/fexit prog return values are not enforced. In trampoline codes, the fentry/fexit prog return values are ignored. Let us enforce it to be 0 to avoid confusion and allows potential future extension. This patch also explicitly added return value checking for tracing/raw_tp, tracing/fmod_ret, and freplace programs such that these program return values can be anything. The purpose are two folds: 1. to make it explicit about return value expectations for these programs in verifier. 2. for tracing prog_type, if a future attach type is added, the default is -ENOTSUPP which will enforce to specify return value ranges explicitly. Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200514053206.1298415-1-yhs@fb.com
2020-05-14net: stmmac: fix num_por initializationVinod Koul
Driver missed initializing num_por which is one of the por values that driver configures to hardware. In order to get these values, add a new structure ethqos_emac_driver_data which holds por and num_por values and populate that in driver probe. Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos") Reported-by: Rahul Ankushrao Kawadgave <rahulak@qti.qualcomm.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14security: Fix the default value of secid_to_secctx hookAnders Roxell
security_secid_to_secctx is called by the bpf_lsm hook and a successful return value (i.e 0) implies that the parameter will be consumed by the LSM framework. The current behaviour return success when the pointer isn't initialized when CONFIG_BPF_LSM is enabled, with the default return from kernel/bpf/bpf_lsm.c. This is the internal error: [ 1229.341488][ T2659] usercopy: Kernel memory exposure attempt detected from null address (offset 0, size 280)! [ 1229.374977][ T2659] ------------[ cut here ]------------ [ 1229.376813][ T2659] kernel BUG at mm/usercopy.c:99! [ 1229.378398][ T2659] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 1229.380348][ T2659] Modules linked in: [ 1229.381654][ T2659] CPU: 0 PID: 2659 Comm: systemd-journal Tainted: G B W 5.7.0-rc5-next-20200511-00019-g864e0c6319b8-dirty #13 [ 1229.385429][ T2659] Hardware name: linux,dummy-virt (DT) [ 1229.387143][ T2659] pstate: 80400005 (Nzcv daif +PAN -UAO BTYPE=--) [ 1229.389165][ T2659] pc : usercopy_abort+0xc8/0xcc [ 1229.390705][ T2659] lr : usercopy_abort+0xc8/0xcc [ 1229.392225][ T2659] sp : ffff000064247450 [ 1229.393533][ T2659] x29: ffff000064247460 x28: 0000000000000000 [ 1229.395449][ T2659] x27: 0000000000000118 x26: 0000000000000000 [ 1229.397384][ T2659] x25: ffffa000127049e0 x24: ffffa000127049e0 [ 1229.399306][ T2659] x23: ffffa000127048e0 x22: ffffa000127048a0 [ 1229.401241][ T2659] x21: ffffa00012704b80 x20: ffffa000127049e0 [ 1229.403163][ T2659] x19: ffffa00012704820 x18: 0000000000000000 [ 1229.405094][ T2659] x17: 0000000000000000 x16: 0000000000000000 [ 1229.407008][ T2659] x15: 0000000000000000 x14: 003d090000000000 [ 1229.408942][ T2659] x13: ffff80000d5b25b2 x12: 1fffe0000d5b25b1 [ 1229.410859][ T2659] x11: 1fffe0000d5b25b1 x10: ffff80000d5b25b1 [ 1229.412791][ T2659] x9 : ffffa0001034bee0 x8 : ffff00006ad92d8f [ 1229.414707][ T2659] x7 : 0000000000000000 x6 : ffffa00015eacb20 [ 1229.416642][ T2659] x5 : ffff0000693c8040 x4 : 0000000000000000 [ 1229.418558][ T2659] x3 : ffffa0001034befc x2 : d57a7483a01c6300 [ 1229.420610][ T2659] x1 : 0000000000000000 x0 : 0000000000000059 [ 1229.422526][ T2659] Call trace: [ 1229.423631][ T2659] usercopy_abort+0xc8/0xcc [ 1229.425091][ T2659] __check_object_size+0xdc/0x7d4 [ 1229.426729][ T2659] put_cmsg+0xa30/0xa90 [ 1229.428132][ T2659] unix_dgram_recvmsg+0x80c/0x930 [ 1229.429731][ T2659] sock_recvmsg+0x9c/0xc0 [ 1229.431123][ T2659] ____sys_recvmsg+0x1cc/0x5f8 [ 1229.432663][ T2659] ___sys_recvmsg+0x100/0x160 [ 1229.434151][ T2659] __sys_recvmsg+0x110/0x1a8 [ 1229.435623][ T2659] __arm64_sys_recvmsg+0x58/0x70 [ 1229.437218][ T2659] el0_svc_common.constprop.1+0x29c/0x340 [ 1229.438994][ T2659] do_el0_svc+0xe8/0x108 [ 1229.440587][ T2659] el0_svc+0x74/0x88 [ 1229.441917][ T2659] el0_sync_handler+0xe4/0x8b4 [ 1229.443464][ T2659] el0_sync+0x17c/0x180 [ 1229.444920][ T2659] Code: aa1703e2 aa1603e1 910a8260 97ecc860 (d4210000) [ 1229.447070][ T2659] ---[ end trace 400497d91baeaf51 ]--- [ 1229.448791][ T2659] Kernel panic - not syncing: Fatal exception [ 1229.450692][ T2659] Kernel Offset: disabled [ 1229.452061][ T2659] CPU features: 0x240002,20002004 [ 1229.453647][ T2659] Memory Limit: none [ 1229.455015][ T2659] ---[ end Kernel panic - not syncing: Fatal exception ]--- Rework the so the default return value is -EOPNOTSUPP. There are likely other callbacks such as security_inode_getsecctx() that may have the same problem, and that someone that understand the code better needs to audit them. Thank you Arnd for helping me figure out what went wrong. Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: James Morris <jamorris@linux.microsoft.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/bpf/20200512174607.9630-1-anders.roxell@linaro.org
2020-05-14libbpf: Fix register naming in PT_REGS s390 macrosSumanth Korikkar
Fix register naming in PT_REGS s390 macros Fixes: b8ebce86ffe6 ("libbpf: Provide CO-RE variants of PT_REGS macros") Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200513154414.29972-1-sumanthk@linux.ibm.com
2020-05-14bpf: Fix bug in mmap() implementation for BPF array mapAndrii Nakryiko
mmap() subsystem allows user-space application to memory-map region with initial page offset. This wasn't taken into account in initial implementation of BPF array memory-mapping. This would result in wrong pages, not taking into account requested page shift, being memory-mmaped into user-space. This patch fixes this gap and adds a test for such scenario. Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200512235925.3817805-1-andriin@fb.com
2020-05-14samples: bpf: Fix build errorMatteo Croce
GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains a symbol which clashes with libbpf: /usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here collect2: error: ld returned 1 exit status bpf_log_buf here seems to be a leftover, so removing it. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200511113234.80722-1-mcroce@redhat.com
2020-05-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kasan: add missing functions declarations to kasan.h kasan: consistently disable debugging features ipc/util.c: sysvipc_find_ipc() incorrectly updates position index userfaultfd: fix remap event with MREMAP_DONTUNMAP mm/gup: fix fixup_user_fault() on multiple retries epoll: call final ep_events_available() check under the lock mm, memcg: fix inconsistent oom event behavior
2020-05-14Merge tag 'for-linus-2020-05-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread fix from Christian Brauner: "This contains a single fix for all exported legacy fork helpers to block accidental access to clone3() features in the upper 32 bits of their respective flags arguments. I got Cced on a glibc issue where someone reported consistent failures for the legacy clone() syscall on ppc64le when sign extension was performed (since the clone() syscall in glibc exposes the flags argument as an int whereas the kernel uses unsigned long). The legacy clone() syscall is odd in a bunch of ways and here two things interact: - First, legacy clone's flag argument is word-size dependent, i.e. it's an unsigned long whereas most system calls with flag arguments use int or unsigned int. - Second, legacy clone() ignores unknown and deprecated flags. The two of them taken together means that users on 64bit systems can pass garbage for the upper 32bit of the clone() syscall since forever and things would just work fine. The following program compiled on a 64bit kernel prior to v5.7-rc1 will succeed and will fail post v5.7-rc1 with EBADF: int main(int argc, char *argv[]) { pid_t pid; /* Note that legacy clone() has different argument ordering on * different architectures so this won't work everywhere. * * Only set the upper 32 bits. */ pid = syscall(__NR_clone, 0xffffffff00000000 | SIGCHLD, NULL, NULL, NULL, NULL); if (pid < 0) exit(EXIT_FAILURE); if (pid == 0) exit(EXIT_SUCCESS); if (wait(NULL) != pid) exit(EXIT_FAILURE); exit(EXIT_SUCCESS); } Since legacy clone() couldn't be extended this was not a problem so far and nobody really noticed or cared since nothing in the kernel ever bothered to look at the upper 32 bits. But once we introduced clone3() and expanded the flag argument in struct clone_args to 64 bit we opened this can of worms. With the first flag-based extension to clone3() making use of the upper 32 bits of the flag argument we've effectively made it possible for the legacy clone() syscall to reach clone3() only flags on accident. The sign extension scenario is just the odd corner-case that we needed to figure this out. The reason we just realized this now and not already when we introduced CLONE_CLEAR_SIGHAND was that CLONE_INTO_CGROUP assumes that a valid cgroup file descriptor has been given - whereas CLONE_CLEAR_SIGHAND doesn't need to verify anything. It just silently resets the signal handlers to SIG_DFL. So the sign extension (or the user accidently passing garbage for the upper 32 bits) caused the CLONE_INTO_CGROUP bit to be raised and the kernel to error out when it didn't find a valid cgroup file descriptor. Note, I'm also capping kernel_thread()'s flag argument mainly because none of the new features make sense for kernel_thread() and we shouldn't risk them being accidently activated however unlikely. If we wanted to, we could even make kernel_thread() yell when an unknown flag has been set which it doesn't do right now. But it's not worth risking this in a bugfix imho" * tag 'for-linus-2020-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fork: prevent accidental access to clone3 features
2020-05-14Merge tag 'trace-v5.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing fixes from Steven Rostedt: "Various tracing fixes: - Fix a crash when having function tracing and function stack tracing on the command line. The ftrace trampolines are created as executable and read only. But the stack tracer tries to modify them with text_poke() which expects all kernel text to still be writable at boot. Keep the trampolines writable at boot, and convert them to read-only with the rest of the kernel. - A selftest was triggering in the ring buffer iterator code, that is no longer valid with the update of keeping the ring buffer writable while a iterator is reading. Just bail after three failed attempts to get an event and remove the warning and disabling of the ring buffer. - While modifying the ring buffer code, decided to remove all the unnecessary BUG() calls" * tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Remove all BUG() calls ring-buffer: Don't deactivate the ring buffer on failed iterator reads x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up
2020-05-14Merge tag 'pm-5.7-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Prevent the suspend-to-idle internal loop from busy spinning after a spurious ACPI SCI wakeup in some cases" * tag 'pm-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()
2020-05-14kasan: add missing functions declarations to kasan.hAndrey Konovalov
KASAN is currently missing declarations for __asan_report* and __hwasan* functions. This can lead to compiler warnings. Reported-by: Leon Romanovsky <leon@kernel.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Leon Romanovsky <leon@kernel.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/45b445a76a79208918f0cc44bfabebaea909b54d.1589297433.git.andreyknvl@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-14kasan: consistently disable debugging featuresAndrey Konovalov
KASAN is incompatible with some kernel debugging/tracing features. There's been multiple patches that disable those feature for some of KASAN files one by one. Instead of prolonging that, disable these features for all KASAN files at once. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Leon Romanovsky <leonro@mellanox.com> Link: http://lkml.kernel.org/r/29bd753d5ff5596425905b0b07f51153e2345cc1.1589297433.git.andreyknvl@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-14ipc/util.c: sysvipc_find_ipc() incorrectly updates position indexVasily Averin
Commit 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase position index") is causing this bug (seen on 5.6.8): # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages # ipcmk -Q Message queue id: 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 # ipcmk -Q Message queue id: 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcrm -q 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 2 # ipcrm -q 2 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 3 # ipcrm -q 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 Whenever an IPC item with a low id is deleted, the items with higher ids are duplicated, as if filling a hole. new_pos should jump through hole of unused ids, pos can be updated inside "for" cycle. Fixes: 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase position index") Reported-by: Andreas Schwab <schwab@suse.de> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Waiman Long <longman@redhat.com> Cc: NeilBrown <neilb@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 12:03:41 +0000