| Age | Commit message (Collapse) | Author |
|---|
|
Device id 0927 is the RTL8153B-based component of the 'Surface USB-C to
Ethernet and USB Adapter' and may be used as a component of other devices
in future. Tested and working with the r8152 driver.
Update the cdc_ether blacklist due to the RTL8153 'network jam on suspend'
issue which this device will cause (personally confirmed).
Signed-off-by: Marc Payne <marc.payne@mdpsys.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This changes the HMAC used in the ADD_ADDR option from the leftmost 64
bits to the rightmost 64 bits as described in RFC 8684, section 3.4.1.
This issue was discovered while adding support to packetdrill for the
ADD_ADDR v1 option.
Fixes: 3df523ab582c ("mptcp: Add ADD_ADDR handling")
Signed-off-by: Todd Malsbary <todd.malsbary@linux.intel.com>
Acked-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.7
Third and most likely the last set of fixes for v5.7. Only one
iwlwifi fix this time.
iwlwifi
* another fix for QuZ device configuration
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an extra validation of the len parameter, as for ext4 some files
might have smaller file size limits than others. This also means the
redundant size check in ext4_ioctl_get_es_cache can go away, as all
size checking is done in the shared fiemap handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200505154324.3226743-3-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In bmac_get_station_address, We're reading two bytes at a time from ROM,
but we do that six times, resulting in 12 bytes of read & writes. This
means we will write off the end of the six-byte destination buffer.
This change fixes the for-loop to only read/write six bytes.
Based on a proposed fix from Finn Thain <fthain@telegraphics.com.au>.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reported-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Reported-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ext4 supports max number of logical blocks in a file to be 0xffffffff.
(This is since ext4_extent's ee_block is __le32).
This means that EXT4_MAX_LOGICAL_BLOCK should be 0xfffffffe (starting
from 0 logical offset). This patch fixes this.
The issue was seen when ext4 moved to iomap_fiemap API and when
overlayfs was mounted on top of ext4. Since overlayfs was missing
filemap_check_ranges(), so it could pass a arbitrary huge length which
lead to overflow of map.m_len logic.
This patch fixes that.
Fixes: d3b6f23f7167 ("ext4: move ext4_fiemap to use iomap framework")
Reported-by: syzbot+77fa5bdb65cc39711820@syzkaller.appspotmail.com
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200505154324.3226743-2-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of driver and core fixes as well as MAINTAINER update"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: add maintainer for mediatek i2c controller driver
i2c: mux: Replace zero-length array with flexible-array
i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'
i2c: altera: Fix race between xfer_msg and isr thread
i2c: algo-pca: update contact email
i2c: at91: Fix pinmux after devm_gpiod_get() for bus recovery
i2c: use my kernel.org address from now on
i2c: fix missing pm_runtime_put_sync in i2c_device_probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"One patch from Vitaly to fix reenlightenment notifications"
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Properly suspend/resume reenlightenment notifications
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"All related to the AMD IOMMU driver:
- ACPI table parser fix to correctly read the UID of ACPI devices
- ACPI UID device matching fix
- Fix deferred device attachment to a domain in kdump kernels when
the IOMMU driver uses the dma-iommu DMA-API implementation"
* tag 'iommu-fixes-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix deferred domain attachment
iommu/amd: Fix get_acpihid_device_id()
iommu/amd: Fix over-read of ACPI UID from IVRS table
|
|
I don't see what security concern is addressed by obfuscating NULL
and IS_ERR() error pointers, printed with %p/%pK. Given the number
of sites where %p is used (over 10000) and the fact that NULL pointers
aren't uncommon, it probably wouldn't take long for an attacker to
find the hash that corresponds to 0. Although harder, the same goes
for most common error values, such as -1, -2, -11, -14, etc.
The NULL part actually fixes a regression: NULL pointers weren't
obfuscated until commit 3e5903eb9cff ("vsprintf: Prevent crash when
dereferencing invalid pointers") which went into 5.2. I'm tacking
the IS_ERR() part on here because error pointers won't leak kernel
addresses and printing them as pointers shouldn't be any different
from e.g. %d with PTR_ERR_OR_ZERO(). Obfuscating them just makes
debugging based on existing pr_debug and friends excruciating.
Note that the "always print 0's for %pK when kptr_restrict == 2"
behaviour which goes way back is left as is.
Example output with the patch applied:
ptr error-ptr NULL
%p: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%pK, kptr = 0: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%px: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 1: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 2: 0000000000000000 0000000000000000 0000000000000000
Fixes: 3e5903eb9cff ("vsprintf: Prevent crash when dereferencing invalid pointers")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Although not exactly identical, unthrottle_cfs_rq() and enqueue_task_fair()
are quite close and follow the same sequence for enqueuing an entity in the
cfs hierarchy. Modify unthrottle_cfs_rq() to use the same pattern as
enqueue_task_fair(). This fixes a problem already faced with the latter and
add an optimization in the last for_each_sched_entity loop.
Fixes: fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
Reported-by Tao Zhou <zohooouoto@zoho.com.cn>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/20200513135528.4742-1-vincent.guittot@linaro.org
|
|
The intention of commit 96e74ebf8d59 ("sched/debug: Add task uclamp
values to SCHED_DEBUG procfs") was to print requested and effective
task uclamp values. The requested values printed are read from p->uclamp,
which holds the last effective values. Fix this by printing the values
from p->uclamp_req.
Fixes: 96e74ebf8d59 ("sched/debug: Add task uclamp values to SCHED_DEBUG procfs")
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/1589115401-26391-1-git-send-email-pkondeti@codeaurora.org
|
|
sched/fair: Fix enqueue_task_fair warning some more
The recent patch, fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
did not fully resolve the issues with the rq->tmp_alone_branch !=
&rq->leaf_cfs_rq_list warning in enqueue_task_fair. There is a case where
the first for_each_sched_entity loop exits due to on_rq, having incompletely
updated the list. In this case the second for_each_sched_entity loop can
further modify se. The later code to fix up the list management fails to do
what is needed because se does not point to the sched_entity which broke out
of the first loop. The list is not fixed up because the throttled parent was
already added back to the list by a task enqueue in a parallel child hierarchy.
Address this by calling list_add_leaf_cfs_rq if there are throttled parents
while doing the second for_each_sched_entity loop.
Fixes: fe61468b2cb ("sched/fair: Fix enqueue_task_fair warning")
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200512135222.GC2201@lorien.usersys.redhat.com
|
|
When building with Clang + -Wtautological-compare and
CONFIG_CPUMASK_OFFSTACK unset:
arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus'
equal to a null pointer is always false [-Wtautological-pointer-compare]
if (downed_cpus == NULL &&
^~~~~~~~~~~ ~~~~
arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus'
equal to a null pointer is always false [-Wtautological-pointer-compare]
if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
^~~~~~~~~~~ ~~~~
2 warnings generated.
Commit
f7e30f01a9e2 ("cpumask: Add helper cpumask_available()")
added cpumask_available() to fix warnings of this nature. Use that here
so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's
value.
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/982
Link: https://lkml.kernel.org/r/20200408205323.44490-1-natechancellor@gmail.com
|
|
Commit b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
has moved some code in the probe function and reordered the error handling
path accordingly.
However, a goto has been missed.
Fix it and goto the right label if 'dma_async_device_register()' fails, so
that all resources are released.
Fixes: b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200516214205.276266-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When SYNC_STATE_ONLY support was added in commit 05ef983e0d65 ("driver
core: Add device link support for SYNC_STATE_ONLY flag"),
device_link_add() incorrectly skipped adding the new SYNC_STATE_ONLY
device link to the supplier's and consumer's "device link" list.
This causes multiple issues:
- The device link is lost forever from driver core if the caller
didn't keep track of it (caller typically isn't expected to). This is
a memory leak.
- The device link is also never visible to any other code path after
device_link_add() returns.
If we fix the "device link" list handling, that exposes a bunch of
issues.
1. The device link "status" state management code rightfully doesn't
handle the case where a DL_FLAG_MANAGED device link exists between a
supplier and consumer, but the consumer manages to probe successfully
before the supplier. The addition of DL_FLAG_SYNC_STATE_ONLY links break
this assumption. This causes device_links_driver_bound() to throw a
warning when this happens.
Since DL_FLAG_SYNC_STATE_ONLY device links are mainly used for creating
proxy device links for child device dependencies and aren't useful once
the consumer device probes successfully, this patch just deletes
DL_FLAG_SYNC_STATE_ONLY device links once its consumer device probes.
This way, we avoid the warning, free up some memory and avoid
complicating the device links "status" state management code.
2. Creating a DL_FLAG_STATELESS device link between two devices that
already have a DL_FLAG_SYNC_STATE_ONLY device link will result in the
DL_FLAG_STATELESS flag not getting set correctly. This patch also fixes
this.
Lastly, this patch also fixes minor whitespace issues.
Cc: stable@vger.kernel.org
Fixes: 05ef983e0d65 ("driver core: Add device link support for SYNC_STATE_ONLY flag")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20200519063000.128819-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The IOMMU core code has support for deferring the attachment of a domain
to a device. This is needed in kdump kernels where the new domain must
not be attached to a device before the device driver takes it over.
When the AMD IOMMU driver got converted to use the dma-iommu
implementation, the deferred attaching got lost. The code in
dma-iommu.c has support for deferred attaching, but it calls into
iommu_attach_device() to actually do it. But iommu_attach_device()
will check if the device should be deferred in it code-path and do
nothing, breaking deferred attachment.
Move the is_deferred_attach() check out of the attach_device path and
into iommu_group_add_device() to make deferred attaching work from the
dma-iommu code.
Fixes: 795bbbb9b6f8 ("iommu/dma-iommu: Handle deferred devices")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200519130340.14564-1-joro@8bytes.org
|
|
If the mapping address is wrong then we have to release the reference to
it before returning -EINVAL.
Fixes: 088880ddc0b2 ("drm/etnaviv: implement softpin")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
The GC860 has one GPU device which has a 2d and 3d core. In this case
we want to expose perfmon information for both cores.
The driver has one array which contains all possible perfmon domains
with some meta data - doms_meta. Here we can see that for the GC860
two elements of that array are relevant:
doms_3d: is at index 0 in the doms_meta array with 8 perfmon domains
doms_2d: is at index 1 in the doms_meta array with 1 perfmon domain
The userspace driver wants to get a list of all perfmon domains and
their perfmon signals. This is done by iterating over all domains and
their signals. If the userspace driver wants to access the domain with
id 8 the kernel driver fails and returns invalid data from doms_3d with
and invalid offset.
This results in:
Unable to handle kernel paging request at virtual address 00000000
On such a device it is not possible to use the userspace driver at all.
The fix for this off-by-one error is quite simple.
Reported-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Fixes: ed1dd899baa3 ("drm/etnaviv: rework perfmon query infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
This change fixes crash observed on PM resume. This bug
was introduced in the change made for flash-edu support.
Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
A few known Clevo machines (PC50, PC70, X170) with ALC1220 codec need
the existing quirk for pins for PB51 and co.
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200519065012.13119-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a new action is installed, firstuse field of 'tcf_t' is explicitly set
to 0. Value of zero means "new action, not yet used"; as a packet hits the
action, 'firstuse' is stamped with the current jiffies value.
tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.
Fixes: 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the nvmem framework is enabled, a nvmem device is created per mtd
device/partition.
It is not uncommon that a device can have multiple mtd devices with
partitions that have the same name. Eg, when there DT overlay is allowed
and the same device with mtd is attached twice.
Under that circumstances, the mtd fails to register due to a name
duplication on the nvmem framework.
With this patch we use the mtdX name instead of the partition name,
which is unique.
[ 8.948991] sysfs: cannot create duplicate filename '/bus/nvmem/devices/Production Data'
[ 8.948992] CPU: 7 PID: 246 Comm: systemd-udevd Not tainted 5.5.0-qtec-standard #13
[ 8.948993] Hardware name: AMD Dibbler/Dibbler, BIOS 05.22.04.0019 10/26/2019
[ 8.948994] Call Trace:
[ 8.948996] dump_stack+0x50/0x70
[ 8.948998] sysfs_warn_dup.cold+0x17/0x2d
[ 8.949000] sysfs_do_create_link_sd.isra.0+0xc2/0xd0
[ 8.949002] bus_add_device+0x74/0x140
[ 8.949004] device_add+0x34b/0x850
[ 8.949006] nvmem_register.part.0+0x1bf/0x640
...
[ 8.948926] mtd mtd8: Failed to register NVMEM device
Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This is done by default in the raw NAND core (nand_base.c) but was
missing in the SPI-NAND core. Without these two lines the ecc_strength
and ecc_step_size values are not exported to the user through sysfs.
Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"A couple of miscellaneous bug fixes for the integrity subsystem:
IMA:
- Properly modify the open flags in order to calculate the file hash.
- On systems requiring the IMA policy to be signed, the policy is
loaded differently. Don't differentiate between "enforce" and
either "log" or "fix" modes how the policy is loaded.
EVM:
- Two patches to fix an EVM race condition, normally the result of
attempting to load an unsupported hash algorithm.
- Use the lockless RCU version for walking an append only list"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
evm: Fix a small race in init_desc()
evm: Fix RCU list related warnings
ima: Fix return value of ima_write_policy()
evm: Check also if *tfm is an error pointer in init_desc()
ima: Set file->f_mode instead of file->f_flags in ima_calc_file_hash()
|
|
The ST Audio ADCIII is an STDSP24 card plus extension box. With commit
e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII") we
enabled the ADCIII ports using the model=staudio option but forgot
this part to ensure the STDSP24 card is initialized properly.
Fixes: e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII")
Signed-off-by: Scott Bahling <sbahling@suse.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1048934
Link: https://lore.kernel.org/r/20200518175728.28766-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix potential memory leak in exfat_find
- Set exfat's splice_write to iter_file_splice_write to fix a splice
failure on direct-opened files
* tag 'for-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix possible memory leak in exfat_find()
exfat: use iter_file_splice_write
|
|
Don't call req->page_done() on each page as we finish filling it with
the data coming from the network. Whilst this might speed up the
application a bit, it's a problem if there's a network failure and the
operation has to be reissued.
If this happens, an oops occurs because afs_readpages_page_done() clears
the pointer to each page it unlocks and when a retry happens, the
pointers to the pages it wants to fill are now NULL (and the pages have
been unlocked anyway).
Instead, wait till the operation completes successfully and only then
release all the pages after clearing any terminal gap (the server can
give us less data than we requested as we're allowed to ask for more
than is available).
KASAN produces a bug like the following, and even without KASAN, it can
oops and panic.
BUG: KASAN: wild-memory-access in _copy_to_iter+0x323/0x5f4
Write of size 1404 at addr 0005088000000000 by task md5sum/5235
CPU: 0 PID: 5235 Comm: md5sum Not tainted 5.7.0-rc3-fscache+ #250
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
memcpy+0x39/0x58
_copy_to_iter+0x323/0x5f4
__skb_datagram_iter+0x89/0x2a6
skb_copy_datagram_iter+0x129/0x135
rxrpc_recvmsg_data.isra.0+0x615/0xd42
rxrpc_kernel_recv_data+0x1e9/0x3ae
afs_extract_data+0x139/0x33a
yfs_deliver_fs_fetch_data64+0x47a/0x91b
afs_deliver_to_call+0x304/0x709
afs_wait_for_call_to_complete+0x1cc/0x4ad
yfs_fs_fetch_data+0x279/0x288
afs_fetch_data+0x1e1/0x38d
afs_readpages+0x593/0x72e
read_pages+0xf5/0x21e
__do_page_cache_readahead+0x128/0x23f
ondemand_readahead+0x36e/0x37f
generic_file_buffered_read+0x234/0x680
new_sync_read+0x109/0x17e
vfs_read+0xe6/0x138
ksys_read+0xd8/0x14d
do_syscall_64+0x6e/0x8a
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fixes: 196ee9cd2d04 ("afs: Make afs_fs_fetch_data() take a list of pages")
Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We currently move it to the io_wqe_manager for execution, but we cannot
safely do so as we may lack some of the state to execute it out of
context. As we cancel work anyway when the ring/task exits, just mark
this request as canceled and io_async_task_func() will do the right
thing.
Fixes: aa96bf8a9ee3 ("io_uring: use io-wq manager as backup task if task is exiting")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Flushing the EC work while suspended to idle when the EC GPE status
is not set causes some EC wakeup events (notably power button and
lid ones) to be missed after a series of spurious wakeups on the Dell
XPS13 9360 in my office.
If that happens, the machine cannot be woken up from suspend-to-idle
by the power button or lid status change and it needs to be woken up
in some other way (eg. by a key press).
Flushing the EC work only after successful dispatching the EC GPE,
which means that its status has been set, avoids the issue, so change
the code in question accordingly.
Fixes: 7b301750f7f8 ("ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chris Chiu <chiu@endlessm.com>
|
|
The Gigabyte X570 Aorus Xtreme motherboard with ALC1220 codec
requires a similar workaround for Clevo laptops to enforce the
DAC/mixer connection path. Set up a quirk entry for that.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200518053844.42743-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is a corner case that ALSA keeps increasing the hw_ptr but DMA
already stop working/updating the position for a long time.
In following log we can see the position returned from DMA driver does
not move at all but the hw_ptr got increased at some point of time so
snd_pcm_avail() will return a large number which seems to be a buffer
underrun event from user space program point of view. The program
thinks there is space in the buffer and fill more data.
[ 418.510086] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 418.510149] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6910 avail 9554
...
[ 418.681052] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15102 avail 1362
[ 418.681130] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
[ 418.726515] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 16464 avail 16368
This is because the hw_base will be increased by runtime->buffer_size
frames unconditionally if the hw_ptr is not updated for over half of
buffer time. As the hw_base increases, so does the hw_ptr increased
by the same number.
The avail value returned from snd_pcm_avail() could exceed the limit
(buffer_size) easily becase the hw_ptr itself got increased by same
buffer_size samples when the corner case happens. In following log,
the buffer_size is 16368 samples but the avail is 21810 samples so
CRAS server complains about it.
[ 418.851755] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 27390 avail 5442
[ 418.926491] sound pcmC0D5p: pos 96 hw_ptr 32832 appl_ptr 27390 avail 21810
cras_server[1907]: pcm_avail returned frames larger than buf_size:
sof-glkda7219max: :0,5: 21810 > 16368
By updating runtime->hw_ptr_jiffies each time the HWSYNC is called,
the hw_base will keep the same when buffer stall happens at long as
the interval between each HWSYNC call is shorter than half of buffer
time.
Following is a log captured by a patched kernel. The hw_base/hw_ptr
value is fixed in this corner case and user space program should be
aware of the buffer stall and handle it.
[ 293.525543] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 293.525606] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6880 avail 9584
[ 293.525975] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 10976 avail 5488
[ 293.611178] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15072 avail 1392
[ 293.696429] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
...
[ 381.139517] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1589776238-23877-1-git-send-email-brent.lu@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
'es' is malloced from exfat_get_dentry_set() in exfat_find() and should
be freed before leaving from the error handling cases, otherwise it will
cause memory leak.
Fixes: 5f2aa075070c ("exfat: add inode operations")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
|
|
Doing copy_file_range() on exfat with a file opened for direct IO leads
to an -EFAULT:
# xfs_io -f -d -c "truncate 32768" \
-c "copy_range -d 16384 -l 16384 -f 0" /mnt/test/junk
copy_range: Bad address
and the reason seems to be that we go through:
default_file_splice_write
splice_from_pipe
__splice_from_pipe
write_pipe_buf
__kernel_write
new_sync_write
generic_file_write_iter
generic_file_direct_write
exfat_direct_IO
do_blockdev_direct_IO
iov_iter_get_pages
and land in iterate_all_kinds(), which does "return -EFAULT" for our kvec
iter.
Setting exfat's splice_write to iter_file_splice_write fixes this and lets
fsx (which originally detected the problem) run to success from
the xfstests harness.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
|
|
|
|
Pull IPMI update from Corey Minyard:
"Convert i2c_new_device() to i2c_new_client_device()
Wolfram Sang has asked to have this included in 5.7 so the deprecated
API can be removed next release. There should be no functional
difference.
I think that entire this section of code can be removed; it is
leftover from other things that have since changed, but this is the
safer thing to do for now. The full removal can happen next release"
* tag 'for-linus-5.7-2' of git://github.com/cminyard/linux-ipmi:
char: ipmi: convert to use i2c_new_client_device()
|
|
3bfa7e141b0b ("fs/seq_file.c: seq_read(): add info message about buggy .next functions")
showed that we don't use seq_file correctly.
So make sure that our ->next function always updates the position.
Fixes: 7bccd12d27b7 ("ubi: Add debugfs file for tracking PEB state")
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
crypto_shash_descsize() returns the size of the shash_desc context
needed to compute the hash, not the size of the hash itself.
crypto_shash_digestsize() would be correct, or alternatively using
c->hash_len and c->hmac_desc_len which already store the correct values.
But actually it's simpler to just use stack arrays, so do that instead.
Fixes: 49525e5eecca ("ubifs: Add helper functions for authentication support")
Fixes: da8ef65f9573 ("ubifs: Authenticate replayed journal")
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
We checked for 'force_nonblock' higher up, so it's definitely false
at this point. Kill the check, it's a remnant of when we tried to do
inline splice without always punting to async context.
Fixes: 2fb3e82284fc ("io_uring: punt splice async because of inode mutex")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The compilation warning below reveals that the errors returned from
the sfp_bus_add_upstream() call are not propagated to the callers.
Fix it by returning "ret".
14:37:51 drivers/net/phy/phy_device.c: In function 'phy_sfp_probe':
14:37:51 drivers/net/phy/phy_device.c:1236:6: warning: variable 'ret'
set but not used [-Wunused-but-set-variable]
14:37:51 1236 | int ret;
14:37:51 | ^~~
Fixes: 298e54fa810e ("net: phy: add core phylib sfp support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit adb03115f459 ("net: get rid of an signed integer overflow in ip_idents_reserve()")
used atomic_cmpxchg to replace "atomic_add_return" inside the function
"ip_idents_reserve". The reason was to avoid UBSAN warning.
However, this change has caused performance degrade and in GCC-8,
fno-strict-overflow is now mapped to -fwrapv -fwrapv-pointer
and signed integer overflow is now undefined by default at all
optimization levels[1]. Moreover, it was a bug in UBSAN vs -fwrapv
/-fno-strict-overflow, so Let's revert it safely.
[1] https://gcc.gnu.org/gcc-8/changes.html
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiong Wang <jiongwang@huawei.com>
Signed-off-by: Yuqi Jin <jinyuqi@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Some more clk driver fixes and one core framework fix:
- A handful of TI driver fixes for bad of_node_put() and incorrect
parent names
- Rockchip rk3228 aclk_gpu* creation was interfering with lima GPU
work so we use a composite clk now
- Resuming from suspend on Tegra Jetson TK1 was broken because an
audio PLL calculated an incorrect rate
- A fix for devicetree probing on IM-PD1 by actually specifying a clk
name which is required to pass clk registration
- Avoid list corruption if registration fails for a critical clk"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: clkctrl: convert subclocks to use proper names also
clk: ti: am33xx: fix RTC clock parent
clk: ti: clkctrl: Fix Bad of_node_put within clkctrl_get_name
clk: tegra: Fix initial rate for pll_a on Tegra124
clk: impd1: Look up clock-output-names
clk: Unlink clock if failed to prepare or enable
clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks
|
|
Add the missing size and address cells to the b53 example. Otherwise, it may not
compile or issue warnings if directly copied into a device tree.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 5.7-rc6
The "largest" in here is a bunch of raw-gadget fixes and api changes
as the driver just showed up in -rc1 and work has been done to fix up
some uapi issues found with the original submission, before it shows
up in a -final release.
Other than that, a bunch of other small USB gadget fixes, xhci fixes,
some quirks, andother tiny fixes for reported issues.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: gadget: fix illegal array access in binding with UDC
usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
USB: usbfs: fix mmap dma mismatch
usb: host: xhci-plat: keep runtime active when removing host
usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list
usb: cdns3: gadget: make a bunch of functions static
usb: mtu3: constify struct debugfs_reg32
usb: gadget: udc: atmel: Make some symbols static
usb: raw-gadget: fix null-ptr-deref when reenabling endpoints
usb: raw-gadget: documentation updates
usb: raw-gadget: support stalling/halting/wedging endpoints
usb: raw-gadget: fix gadget endpoint selection
usb: raw-gadget: improve uapi headers comments
usb: typec: mux: intel: Fix DP_HPD_LVL bit field
usb: raw-gadget: fix return value of ep read ioctls
usb: dwc3: select USB_ROLE_SWITCH
usb: gadget: legacy: fix error return code in gncm_bind()
usb: gadget: legacy: fix error return code in cdc_bind()
usb: gadget: legacy: fix redundant initialization warnings
usb: gadget: tegra-xudc: Fix idle suspend/resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull execve fix from Eric Biederman:
"While working on my exec cleanups I found a bug in exec that I
introduced by accident a couple of years ago. I apparently missed the
fact that bprm->file can change.
Now I have a very personal motive to clean up exec and make it more
approachable.
The change is just moving woud_dump to where it acts on the final
bprm->file not the initial bprm->file. I have been careful and tested
and verify this fix works"
* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
exec: Move would_dump into flush_old_exec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 stack unwinding fix from Thomas Gleixner:
"A single bugfix for the ORC unwinder to ensure that the error flag
which tells the unwinding code whether a stack trace can be trusted or
not is always set correctly.
This was messed up by a couple of changes in the recent past"
* tag 'objtool-urgent-2020-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix error handling in __unwind_start()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single fix for early boot crashes of kernels built with gcc10 and
stack protector enabled"
* tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix early boot crash on gcc-10, third try
|
|
For nexthop groups, attributes after NHA_GROUP_TYPE are invalid, but
nh_check_attr_group starts checking at NHA_GROUP. The group type defaults
to multipath and the NHA_GROUP_TYPE is currently optional so this has
slipped through so far. Fix the attribute checking to handle support of
new group types.
Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: ASSOGBA Emery <assogba.emery@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I goofed when I added mm->user_ns support to would_dump. I missed the
fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and
binfmt_script bprm->file is reassigned. Which made the move of
would_dump from setup_new_exec to __do_execve_file before exec_binprm
incorrect as it can result in would_dump running on the script instead
of the interpreter of the script.
The net result is that the code stopped making unreadable interpreters
undumpable. Which allows them to be ptraced and written to disk
without special permissions. Oops.
The move was necessary because the call in set_new_exec was after
bprm->mm was no longer valid.
To correct this mistake move the misplaced would_dump from
__do_execve_file into flos_old_exec, before exec_mmap is called.
I tested and confirmed that without this fix I can attach with gdb to
a script with an unreadable interpreter, and with this fix I can not.
Cc: stable@vger.kernel.org
Fixes: f84df2a6f268 ("exec: Ensure mm->user_ns contains the execed files")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
As for other not inlined requests, alloc req->io for FORCE_ASYNC reqs,
so they can be prepared properly.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
