summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-18usb: dwc2: gadget: Add DDMA chain pointers to dwc2_hsotg_ep structureVahram Aharonyan
Add DMA descriptor members to the dwc2_hsotg_ep structure. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Transfer length limit checking for DDMAVahram Aharonyan
Add dwc2_gadget_get_chain_limit() function and its call in transfer start routine to correctly estimate one go on transfer size if descriptor DMA mode is selected. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: host: Rename MAX_DMA_DESC_SIZE to HOST_DMA_NBYTES_LIMITVahram Aharonyan
Rename MAX_DMA_DESC_SIZE to HOST_DMA_NBYTES_LIMIT as it stores value of host DMA descriptor transfer bytes' limit. Values are different in case of gadget DMA descriptors. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Add DMA descriptor chains for EP 0Vahram Aharonyan
Update dwc2_hsotg structure to add descriptor chains for EP 0: two DMA descriptors for Setup phase, per one for IN/OUT data and status phases. Add their allocation function dwc2_gadget_alloc_ctrl_desc_chains() and its call during gadget probe. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Add DMA descriptor status quadlet fieldsVahram Aharonyan
Add device mode DMA transfer descriptor status quadlet field notations. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Add descriptor DMA parameterVahram Aharonyan
Add a parameter for descriptor DMA and set it based on hardware capabilities. This won't actually be used by the gadget until later, when the descriptor DMA code is in place. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Make the DMA descriptor structure packedVahram Aharonyan
Make the DMA descriptor structure packed to guarantee alignment and size in memory. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Update DMA descriptor structureVahram Aharonyan
Rename DMA descriptor structure from dwc2_hcd_dma_desc to dwc2_dma_desc as it is applies to both host and gadget. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Deprecate g-use-dma bindingJohn Youn
This is not needed as the gadget now fully supports DMA and it can autodetect it. This was initially added because gadget DMA mode was only partially implemented so could not be automatically enabled. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc3: gadget: Fix dead code writing GCTL.RAMCLKSELJohn Youn
The register programming code in dwc2_updated_ram_clk_sel() will never be executed. And in fact the entire function can be removed as there is no way to override the default value of GCTL.RAMCLKSEL. Remove the function and add a comment explaining where GCTL.RAMCLKSEL should be programmed if needed in the future. This fixes dead code warnings in coverity. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Fix coverity issue in hcd_queue.cVardan Mikayelyan
This fixes the coverity issues related to unreachable code with debugging off. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Fix dead code in hcd.cVardan Mikayelyan
Because usb_pipetype() masks urb->pipe, the default case can never be hit. Remove it. This cleans up a coverity warning. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc3: gadget: Remove descriptor arguments to ep_enableJohn Youn
The __dwc3_gadget_endpoint_enable() function has access to the endpoint descriptors via the usb_ep. So we don't need to pass them in as arguments. The descriptors should be set by the caller prior to calling usb_ep_enable(). Signed-off-by: John Youn <johnyoun@synopsys.com> [felipe.balbi@linux.intel.com : minor improvements] Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Update for new usb_endpoint_maxp()Vardan Mikayelyan
Update the dwc2 driver for the new behavior of the usb_endpoint_maxp() and also use the new usb_endpoint_maxp_mult() helper function. This commit fixes failures in high-badwith ISOC transfer tests. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc3: warn on once when no trbsJanusz Dziedzic
Seems last time we hit few issues where we get trb_left = 0, mainly because of HWO bit still set in previous TRB. Add warn on once to catch/fix such problems much faster. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc3: isoc clean DWC3_EP_PENDING_REQUEST flagJanusz Dziedzic
After we kick_transfer we should clean DWC3_EP_PENDING_REQUEST endpoint flag. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc3: fix post-incrementJanusz Dziedzic
Use pre-increment and set -ETIMEDOUT correctly. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc3: clean TRB if STARTTRANSFER failJanusz Dziedzic
In case STARTTRANSFER will fail, clean TRB. Seems HW in such case don't clean HWO bit. So, without this cleanup prev_trb still have HWO bit set. In my case (without patch), after first START failed: - dep->enqueue == 1 - dep->dequeue == 1 - prev_trb still have HWO set - left_trb() == 0 No way to send more data. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc3: decrement queued_requestsJanusz Dziedzic
In case we will fail to STARTTRANSFER we should also decrement queued_requests. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Add PCI propertiesVahram Aharonyan
Add device parameters handling in dwc2-pci similar what is done in dwc3. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Get host DMA device propertiesJohn Youn
The driver will automatically enable host DMA and use it if available. This is consistent with the behavior of all existing platforms. Read in the "snps,host-dma-disable" device property to disable it. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Rename the dma_enable parameter to host_dmaJohn Youn
Rename it so that it is more consistent with the gadget dma parameter. It only affects host-mode operation so prefix it with "host". Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Move gadget settings into core_paramsJohn Youn
Move the gadget devicetree settings into the core_params structure and document them. Then set and check them in params.c, with the addition of some helper functions, and remove the equivalent code in gadget.c. Because these parameters came from the standalone s3c driver, they have a fixed default value rather than an autodetected one. Preserve and document this behavior to avoid any compatibility issues. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Rename host_rx_fifo_size hardware parameterJohn Youn
This hardware parameter is not host specific. It also applies to device mode. Drop the "host" from the name to make that clear. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Remove unnecessary prototypesJohn Youn
Remove the unnecessary prototypes for all the parameter setting functions and declare those functions 'static' in the params.c file. Also remove the duplicate documentation that went along with them. They are already documented as part of the params structure definition. Then move the constants that went along with the prototype into the structure. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Remove dwc2_set_all_params functionJohn Youn
Replace this by statically defining a function with defaults, and just assigning it. This will allow us to use parameters of any type and any default value. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Move parameter initialization into params.cJohn Youn
Consolidate and move all the parameter initialization code from the probe function to params.c. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Declare the core params struct staticallyJohn Youn
This makes it consistent with the hw_params struct and simplifies the memory management for future refactoring. Fix up usage in all files. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Add params.c fileJohn Youn
Add a params.c file and move all driver parameter code there, including all the static parameter definitions. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Remove unused hardware parameterJohn Youn
The dma_desc_fs_enable does not correspond to any hardware parameter and is unused. Remove it. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Remove unnecessary kfreeJohn Youn
This shouldn't be freed by the HCD as it is owned by the core and allocated with devm_kzalloc. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18USB: phy: am335x-control: fix device and of_node leaksJohan Hovold
Make sure to drop the references taken by of_parse_phandle() and bus_find_device() before returning from am335x_get_phy_control(). Note that there is no guarantee that the devres-managed struct phy_control will be valid for the lifetime of the sibling phy device regardless of this change. Fixes: 3bb869c8b3f1 ("usb: phy: Add AM335x PHY driver") Acked-by: Bin Liu <b-liu@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: gadget: f_uac2: fix error handling at afunc_bindPeter Chen
The current error handling flow uses incorrect goto label, fix it Cc: <stable@vger.kernel.org> Fixes: d12a8727171c ("usb: gadget: function: Remove redundant usb_free_all_descriptors") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: gadget: fix request length error for isoc transferPeter Chen
For isoc endpoint descriptor, the wMaxPacketSize is not real max packet size (see Table 9-13. Standard Endpoint Descriptor, USB 2.0 specifcation), it may contain the number of packet, so the real max packet should be ep->desc->wMaxPacketSize && 0x7ff. Cc: Felipe F. Tonello <eu@felipetonello.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Fixes: 16b114a6d797 ("usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_aligna") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-17usb: hub: Fix auto-remount of safely removed or ejected USB-3 devicesMathias Nyman
USB-3 does not have any link state that will avoid negotiating a connection with a plugged-in cable but will signal the host when the cable is unplugged. For USB-3 we used to first set the link to Disabled, then to RxDdetect to be able to detect cable connects or disconnects. But in RxDetect the connected device is detected again and eventually enabled. Instead set the link into U3 and disable remote wakeups for the device. This is what Windows does, and what Alan Stern suggested. Cc: stable@vger.kernel.org Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: xhci-mem: use passed in GFP flags instead of GFP_KERNELDan Carpenter
We normally use the passed in gfp flags for allocations, it's just these two which were missed. Fixes: 22d45f01a836 ("usb/xhci: replace pci_*_consistent() with dma_*_coherent()") Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: mtu3: declare functions staticSudip Mukherjee
The only user of the functions mtu3_irq() and gpd_ring_empty() are in the same file. They can be declared as static. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: xhci: move slot_id from xhci_hcd to xhci_command structureLu Baolu
xhci->slot_id is used for providing a way to pass slot id from the command completion handler to the function waiting for completion. It's shared by enumerations of all USB devices connected to an xhci host. Hence, it's a source for possible races. Since we've introduced command structure and the command queue to xhci driver. It's better to move slot_id from xhci_hcd structure to xhci_command structure. Hence the race source is removed. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: xhci: remove the use of xhci->addr_devLu Baolu
xhci->addr_dev is used for the completion of both address device and enable slot commands. It's shared by enumerations of all USB devices connected to an xhci host. Hence, it's just a source for possible races. Since we've introduced command structure and the command queue to xhci driver. It is time to get rid of addr_dev and use the completion in the command structure instead. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: xhci: cleanup cmd_completion in xhci_virt_deviceLu Baolu
cmd_completion in struct xhci_virt_device is legacy. With command structure and command queue introduced in xhci, cmd_completion is not used any more. This patch removes it. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14xhci: add helper to get the endpoint state of a endpoint contextMathias Nyman
define GET_EP_CTX_STATE() macro to get the endpoint state from a pointer to a le32 enpoint context structure No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: host: xhci: plat: add support for Renesas r8a7796 SoCYoshihiro Shimoda
This patch adds support for Renesas r8a7796 SoC. This SoC is not compatible with r8a7795 because using firmware version differs. Since the "V2" firmware can be used on both r8a7795 (es1.x) and r8a7796, the "renesas,rcar-gen3-xhci" keeps to use the "V2" for now. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: host: xhci: rcar: add a new firmware version for r8a7796Yoshihiro Shimoda
This patch adds a new firmware version "V3" for r8a7796. This patch also adds explanation of each version's information. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: xhci: clean up error_bitmask usageLu Baolu
In xhci_handle_event(), when errors are detected, driver always sets a bit in error_bitmask (one member of the xhci private driver data). That means users have to retrieve and decode the value of error_bitmask in xhci private driver data if they want to know whether those erros ever happened in xhci_handle_event(). Otherwise, those errors are just ignored silently. This patch cleans up this by replacing the setting of error_bitmask with the kernel print functions, so that users can easily check and report the errors happened in xhci_handle_event(). Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14xhci: Remove duplicate xhci urb giveback functionsMathias Nyman
We want one function that gives back urb in interrupt that can be used in both normal cases and when killing off urbs. Add small helpers that check if td is last_td_in_urb() and that increase the td count of a urb inc_td_cnt() Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14xhci: Giveback urb in finish_td directlyMathias Nyman
mostly refactoring and code cleanup. while handling transfer events we used to check the return value of various functions to see if we can give back the URB. Turns out the only case when those return values are set are when finish_td() notices we are completing the last td in the URB. give back the urb directly in finish_td() instead. Only functional change is that we now increase the event ring dequeue pointer in sowtware after giving back the URB. This should not matter as we are in hardware interrupt context and the time when writing the new event ring dequeue to hardware remains the same. Hardware is the only one that can put event TRBs on the event ring. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14xhci: refactor handle_tx_event() urb givebackMathias Nyman
Move giving back the urb to a separate function No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14xhci: fix non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/usb/host/xhci-ring.c:608:6: warning: symbol 'xhci_unmap_td_bounce_buffer' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14xhci: cleanup and refactor td_to_noop()Mathias Nyman
No functional changes but a few debugging outputs removed Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14xhci: refactor and cleanup process_isoc_td()Mathias Nyman
No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 12:09:36 +0000