| Age | Commit message (Collapse) | Author |
|---|
|
Pull more rdma updates from Jason Gunthorpe:
"This is the SMC cleanup promised, a randconfig regression fix, and
kernel oops fix.
Summary:
- Switch SMC over to rdma_get_gid_attr and remove the compat
- Fix a crash in HFI1 with some BIOS's
- Fix a randconfig failure"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/ucm: fix UCM link error
IB/hfi1: Invalid NUMA node information can cause a divide by zero
RDMA/smc: Replace ib_query_gid with rdma_get_gid_attr
|
|
Merge fixes for missing TLB shootdowns.
This fixes a couple of cases that involved us possibly freeing page
table structures before the required TLB shootdown had been done.
There are a few cleanup patches to make the code easier to follow, and
to avoid some of the more problematic cases entirely when not necessary.
To make this easier for backports, it undoes the recent lazy TLB
patches, because the cleanups and fixes are more important, and Rik is
ok with re-doing them later when things have calmed down.
The missing TLB flush was only delayed, and the wrong ordering only
happened under memory pressure (and in theory under a couple of other
fairly theoretical situations), so this may have been all very unlikely
to have hit people in practice.
But getting the TLB shootdown wrong is _so_ hard to debug and see that I
consider this a crticial fix.
Many thanks to Jann Horn for having debugged this.
* tlb-fixes:
x86/mm: Only use tlb_remove_table() for paravirt
mm: mmu_notifier fix for tlb_end_vma
mm/tlb, x86/mm: Support invalidating TLB caches for RCU_TABLE_FREE
mm/tlb: Remove tlb_remove_table() non-concurrent condition
mm: move tlb_table_flush to tlb_flush_mmu_free
x86/mm/tlb: Revert the recent lazy TLB patches
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes and cleanups from Juergen Gross:
"Some cleanups, some minor fixes and a fix for a bug introduced in this
merge window hitting 32-bit PV guests"
* tag 'for-linus-4.19b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: enable early use of set_fixmap in 32-bit Xen PV guest
xen: remove unused hypercall functions
x86/xen: remove unused function xen_auto_xlated_memory_setup()
xen/ACPI: don't upload Px/Cx data for disabled processors
x86/Xen: further refine add_preferred_console() invocations
xen/mcelog: eliminate redundant setting of interface version
x86/Xen: mark xen_setup_gdt() __init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
- Fix microMIPS build failures by adding a .insn directive to the
barrier_before_unreachable() asm statement in order to convince the
toolchain that the asm statement is a valid branch target rather
than a bogus attempt to switch ISA.
- Clean up our declarations of TLB functions that we overwrite with
generated code in order to prevent the compiler making assumptions
about alignment that cause microMIPS kernels built with GCC 7 &
above to die early during boot.
- Fix up a regression for MIPS32 kernels which slipped into the main
MIPS pull for 4.19, causing CONFIG_32BIT=y kernels to contain
inappropriate MIPS64 instructions.
- Extend our existing workaround for MIPSr6 builds that end up using
the __multi3 intrinsic to GCC 7 & below, rather than just GCC 7.
* tag 'mips_4.19_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: lib: Provide MIPS64r6 __multi3() for GCC < 7
MIPS: Workaround GCC __builtin_unreachable reordering bug
compiler.h: Allow arch-specific asm/compiler.h
MIPS: Avoid move psuedo-instruction whilst using MIPS_ISA_LEVEL
MIPS: Consistently declare TLB functions
MIPS: Export tlbmiss_handler_setup_pgd near its definition
|
|
Pull OpenRISC update from Stafford Horne:
"Just one change for 4.19: refactoring from Christoph Hellwig to use
generic DMA facilities"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: use generic dma_noncoherent_ops
openrisc: fix cache maintainance the the sync_single_for_device DMA operation
openrisc: remove the no-op unmap_page and unmap_sg DMA operations
openrisc: remove the sync_single_for_cpu DMA operation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Olof Johansson:
"Business as usual -- the bulk of our changes are to devicetree files
with new hardware support, new SoCs and platforms, and new board
types.
New SoCs/platforms:
- Raspberry Pi Compute Module (CM1) and IO board
- i.MX6SSL from NXP
- Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN
and PLC interfaces
- TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
controllers, communication and PRU subsystem and lots of other
interfaces (PCIe, USB3, etc).
New boards and systems:
- Several Atmel at91-based boards from Laird
- Marvell Armada388-based Helios4 board from SolidRun
- Samsung Aires-based phones (s5pv210)
- Allwinner A64-based Pinebook laptop
In addition to the above, there's the usual amount of new devices
described on existing platforms, fixes and tweaks and new minor
variants of boards/platforms"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits)
arm64: dts: sdm845: Add tsens nodes
arm64: dts: msm8996: thermal: Initialise via DT and add second controller
arm64: dts: sprd: Add one suspend timer
arm64: dts: sprd: Add SC27XX ADC device
arm64: dts: sprd: Add SC27XX eFuse device
arm64: dts: sprd: Add SC27XX vibrator device
arm64: dts: sprd: Add SC27XX breathing light controller device
arm64: dts: meson-axg: add spdif-dit codec
arm64: dts: meson-axg: add lineout codec
arm64: dts: meson-axg: add linein codec
arm64: dts: meson-axg: add tdm interfaces
arm64: dts: meson-axg: add tdmout formatters
arm64: dts: meson-axg: add tdmin formatters
arm64: dts: meson-axg: add spdifout
arm64: dts: rockchip: add led support for Firefly-RK3399
arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399
arm64: dts: rockchip: add power button support for Firefly-RK3399
ARM: dts: aspeed: Add coprocessor interrupt controller
arm64: dts: meson-axg: add audio arb reset controller
arm64: dts: meson-axg: add usb power regulator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep these separate since some files are shared and conflict-prone,
but there isn't really much to write about here.
Some of the churnier pieces is for the Aspeed platforms, which did an
overdue refresh of the defconfig, and enabled USB gadget and some
drivers from there. Most of the rest are minor additions here and
there to turn on drivers that are needed or useful on the various
platforms"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: multi_v7_defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
ARM: config: aspeed: Enable new FSI drivers
ARM: config: multi_v5: Enable ASPEED drivers
ARM: config: multi_v5: Refresh configuration
ARM: config: aspeed: Update defconfig
ARM: multi_v7_defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Disable /sbin/hotplug fork-bomb
ARM: shmobile: defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Enable reset controller support
ARM: shmobile: defconfig: Drop NET_VENDOR_<FOO>=n
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus.
arm64: defconfig: Enable CONFIG_MTD_NAND_QCOM for IPQ8074
ARM: qcom_defconfig: Enable QCOM NAND related configs
ARM: imx_v6_v7_defconfig: add DMATEST support
ARM: mvebu_v7_defconfig: enable SFP support
ARM: mvebu_v7_defconfig: sync defconfig
ARM: multi_v7_defconfig: Add Marvell NAND controller support
arm: configs: Add USB gadget to Aspeed G5 defconfig
arm: configs: Add USB gadget to Aspeed G4 defconfig
arm64: defconfig: enable HiSilicon PMU driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Some of the larger changes this merge window:
- Removal of drivers for Exynos5440, a Samsung SoC that never saw
widespread use.
- Uniphier support for USB3 and SPI reset handling
- Syste control and SRAM drivers and bindings for Allwinner platforms
- Qualcomm AOSS (Always-on subsystem) reset controller drivers
- Raspberry Pi hwmon driver for voltage
- Mediatek pwrap (pmic) support for MT6797 SoC"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
usb: host: exynos: Remove support for Exynos5440
clk: samsung: Remove support for Exynos5440
soc: sunxi: Add the A13, A23 and H3 system control compatibles
reset: uniphier: add reset control support for SPI
cpufreq: exynos: Remove support for Exynos5440
ata: ahci-platform: Remove support for Exynos5440
soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
soc: mediatek: pwrap: fix cipher init setting error
dt-bindings: pwrap: mediatek: add pwrap support for MT6797
reset: uniphier: add USB3 core reset control
dt-bindings: reset: uniphier: add USB3 core reset support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 32-bit SoC platform updates from Olof Johansson:
"Most of the SoC updates in this cycle are cleanups and moves to more
modern infrastructure:
- Davinci was moved to common clock framework
- OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the
keyboard interface (bitbanged AT keyboard via GPIO).
- Removal of some stale code for Renesas platforms
- Power management improvements for i.MX6LL"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits)
ARM: uniphier: select RESET_CONTROLLER
arm64: uniphier: select RESET_CONTROLLER
ARM: uniphier: remove empty Makefile
ARM: exynos: Clear global variable on init error path
ARM: exynos: Remove outdated maintainer information
ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill
soc: r9a06g032: don't build SMP files for non-SMP config
ARM: shmobile: Add the R9A06G032 SMP enabler driver
ARM: at91: pm: configure wakeup sources for ULP1 mode
ARM: at91: pm: add PMC fast startup registers defines
ARM: at91: pm: Add ULP1 mode support
ARM: at91: pm: Use ULP0 naming instead of slow clock
ARM: hisi: handle of_iomap and fix missing of_node_put
ARM: hisi: check of_iomap and fix missing of_node_put
ARM: hisi: fix error handling and missing of_node_put
ARM: mx5: Set the DBGEN bit in ARM_GPC register
ARM: imx51: Configure M4IF to avoid visual artifacts
ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll
ARM: imx: fix i.MX6SLL build
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a pair of fixes to the RISC-V port:
- The removal of our compat.h, which didn't do anything.
- Fixes to sys_riscv_flush_icache to ensure it actually shows up.
We're going to just call this a bug in the ABI, as it was always
supposed to be there.
I've given these a simple build+boot test, both individually and as
the actual tag"
* tag 'riscv-for-linus-4.19-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
riscv: Delete asm/compat.h
RISC-V: Don't use a global include guard for uapi/asm/syscalls.h
RISC-V: Define sys_riscv_flush_icache when SMP=n
|
|
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The kmalloc was not being checked - if it fails issue a warning
and return -ENOMEM to the caller.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: b8da344b74c8 ("cifs: dynamic allocation of ntlmssp blob")
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
cc: Stable <stable@vger.kernel.org>`
|
|
Some SMB2/3 servers, Win2016 but possibly others too, adds padding
not only between PDUs in a compound but also to the final PDU.
This padding extends the PDU to a multiple of 8 bytes.
Check if the unexpected length looks like this might be the case
and avoid triggering the log messages for :
"SMB2 server sent bad RFC1001 len %d not %d\n"
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Masami found an off by one bug in the code that keeps "notrace"
functions from being traced by kprobes. During my testing, I found
that there's places that we may want to add kprobes to notrace, thus
we may end up changing this code before 4.19 is released.
The history behind this change is that we found that adding kprobes to
various notrace functions caused the kernel to crashed. We took the
safe route and decided not to allow kprobes to trace any notrace
function.
But because notrace is added to functions that just cause weird side
effects to the function tracer, but are still safe, preventing kprobes
for all notrace functios may be too much of a big hammer.
One such place is __schedule() is marked notrace, to keep function
tracer from doing strange recursive loops when it gets traced with
NEED_RESCHED set. With this change, one can not add kprobes to the
scheduler.
Masami also added code to use gcov on ftrace"
* tag 'trace-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Fix to check notrace function with correct range
tracing: Allow gcov profiling on only ftrace subsystem
|
|
If we don't use paravirt; don't play unnecessary and complicated games
to free page-tables.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The generic tlb_end_vma does not call invalidate_range mmu notifier, and
it resets resets the mmu_gather range, which means the notifier won't be
called on part of the range in case of an unmap that spans multiple
vmas.
ARM64 seems to be the only arch I could see that has notifiers and uses
the generic tlb_end_vma. I have not actually tested it.
[ Catalin and Will point out that ARM64 currently only uses the
notifiers for KVM, which doesn't use the ->invalidate_range()
callback right now, so it's a bug, but one that happens to
not affect them. So not necessary for stable. - Linus ]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Jann reported that x86 was missing required TLB invalidates when he
hit the !*batch slow path in tlb_remove_table().
This is indeed the case; RCU_TABLE_FREE does not provide TLB (cache)
invalidates, the PowerPC-hash where this code originated and the
Sparc-hash where this was subsequently used did not need that. ARM
which later used this put an explicit TLB invalidate in their
__p*_free_tlb() functions, and PowerPC-radix followed that example.
But when we hooked up x86 we failed to consider this. Fix this by
(optionally) hooking tlb_remove_table() into the TLB invalidate code.
NOTE: s390 was also needing something like this and might now
be able to use the generic code again.
[ Modified to be on top of Nick's cleanups, which simplified this patch
now that tlb_flush_mmu_tlbonly() really only flushes the TLB - Linus ]
Fixes: 9e52fc2b50de ("x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y)")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Will noted that only checking mm_users is incorrect; we should also
check mm_count in order to cover CPUs that have a lazy reference to
this mm (and could do speculative TLB operations).
If removing this turns out to be a performance issue, we can
re-instate a more complete check, but in tlb_table_flush() eliding the
call_rcu_sched().
Fixes: 267239116987 ("mm, powerpc: move the RCU page-table freeing into generic code")
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is no need to call this from tlb_flush_mmu_tlbonly, it logically
belongs with tlb_flush_mmu_free. This makes future fixes simpler.
[ This was originally done to allow code consolidation for the
mmu_notifier fix, but it also ends up helping simplify the
HAVE_RCU_TABLE_INVALIDATE fix. - Linus ]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When running in a container with a user namespace, if you call getxattr
with name = "system.posix_acl_access" and size % 8 != 4, then getxattr
silently skips the user namespace fixup that it normally does resulting in
un-fixed-up data being returned.
This is caused by posix_acl_fix_xattr_to_user() being passed the total
buffer size and not the actual size of the xattr as returned by
vfs_getxattr().
This commit passes the actual length of the xattr as returned by
vfs_getxattr() down.
A reproducer for the issue is:
touch acl_posix
setfacl -m user:0:rwx acl_posix
and the compile:
#define _GNU_SOURCE
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <unistd.h>
#include <attr/xattr.h>
/* Run in user namespace with nsuid 0 mapped to uid != 0 on the host. */
int main(int argc, void **argv)
{
ssize_t ret1, ret2;
char buf1[128], buf2[132];
int fret = EXIT_SUCCESS;
char *file;
if (argc < 2) {
fprintf(stderr,
"Please specify a file with "
"\"system.posix_acl_access\" permissions set\n");
_exit(EXIT_FAILURE);
}
file = argv[1];
ret1 = getxattr(file, "system.posix_acl_access",
buf1, sizeof(buf1));
if (ret1 < 0) {
fprintf(stderr, "%s - Failed to retrieve "
"\"system.posix_acl_access\" "
"from \"%s\"\n", strerror(errno), file);
_exit(EXIT_FAILURE);
}
ret2 = getxattr(file, "system.posix_acl_access",
buf2, sizeof(buf2));
if (ret2 < 0) {
fprintf(stderr, "%s - Failed to retrieve "
"\"system.posix_acl_access\" "
"from \"%s\"\n", strerror(errno), file);
_exit(EXIT_FAILURE);
}
if (ret1 != ret2) {
fprintf(stderr, "The value of \"system.posix_acl_"
"access\" for file \"%s\" changed "
"between two successive calls\n", file);
_exit(EXIT_FAILURE);
}
for (ssize_t i = 0; i < ret2; i++) {
if (buf1[i] == buf2[i])
continue;
fprintf(stderr,
"Unexpected different in byte %zd: "
"%02x != %02x\n", i, buf1[i], buf2[i]);
fret = EXIT_FAILURE;
}
if (fret == EXIT_SUCCESS)
fprintf(stderr, "Test passed\n");
else
fprintf(stderr, "Test failed\n");
_exit(fret);
}
and run:
./tester acl_posix
On a non-fixed up kernel this should return something like:
root@c1:/# ./t
Unexpected different in byte 16: ffffffa0 != 00
Unexpected different in byte 17: ffffff86 != 00
Unexpected different in byte 18: 01 != 00
and on a fixed kernel:
root@c1:~# ./t
Test passed
Cc: stable@vger.kernel.org
Fixes: 2f6f0654ab61 ("userns: Convert vfs posix_acl support to use kuids and kgids")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199945
Reported-by: Colin Watson <cjwatson@ubuntu.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Prior to doing compiler feature detection in Kconfig, attempts to build
GCC plugins with Clang would fail the build, much in the same way missing
GCC plugin headers would fail the build. However, now that this logic
has been lifted into Kconfig, add an explicit test for GCC (instead of
duplicating it in the feature-test script).
Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
A previous commit removed the ability to have per-rq flags. We used
those flags to maintain inflight counts. Since we don't have those
anymore, we have to always maintain inflight counts, even if wbt is
disabled. This is clearly suboptimal.
Add a queue quiesce around changing the wbt latency settings from sysfs
to work around this. With that, we can reliably put the enabled check in
our bio_to_wbt_flags(), since we know the WBT_TRACKED flag will be
consistent for the lifetime of the request.
Fixes: c1c80384c8f ("block: remove external dependency on wbt_flags")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The commit e7e81847478 ("powerpc/64s: move machine check SLB flushing
to mm/slb.c") introduced a bug in reloading bolted SLB entries. Unused
bolted entries are stored with .esid=0 in the slb_shadow area, and
that value is now used directly as the RB input to slbmte, which means
the RB[52:63] index field is set to 0, which causes SLB entry 0 to be
cleared.
Fix this by storing the index bits in the unused bolted entries, which
directs the slbmte to the right place.
The SLB shadow area is also used by the hypervisor, but PAPR is okay
with that, from LoPAPR v1.1, 14.11.1.3 SLB Shadow Buffer:
Note: SLB is filled sequentially starting at index 0
from the shadow buffer ignoring the contents of
RB field bits 52-63
Fixes: e7e81847478b ("powerpc/64s: move machine check SLB flushing to mm/slb.c")
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 76fa4975f3ed ("KVM: PPC: Check if IOMMU page is contained in
the pinned physical page", 2018-07-17) added some checks to ensure
that guest DMA mappings don't attempt to map more than the guest is
entitled to access. However, errors in the logic mean that legitimate
guest requests to map pages for DMA are being denied in some
situations. Specifically, if the first page of the range passed to
mm_iommu_get() is mapped with a normal page, and subsequent pages are
mapped with transparent huge pages, we end up with mem->pageshift ==
0. That means that the page size checks in mm_iommu_ua_to_hpa() and
mm_iommu_up_to_hpa_rm() will always fail for every page in that
region, and thus the guest can never map any memory in that region for
DMA, typically leading to a flood of error messages like this:
qemu-system-ppc64: VFIO_MAP_DMA: -22
qemu-system-ppc64: vfio_dma_map(0x10005f47780, 0x800000000000000, 0x10000, 0x7fff63ff0000) = -22 (Invalid argument)
The logic errors in mm_iommu_get() are:
(a) use of 'ua' not 'ua + (i << PAGE_SHIFT)' in the find_linux_pte()
call (meaning that find_linux_pte() returns the pte for the
first address in the range, not the address we are currently up
to);
(b) use of 'pageshift' as the variable to receive the hugepage shift
returned by find_linux_pte() - for a normal page this gets set
to 0, leading to us setting mem->pageshift to 0 when we conclude
that the pte returned by find_linux_pte() didn't match the page
we were looking at;
(c) comparing 'compshift', which is a page order, i.e. log base 2 of
the number of pages, with 'pageshift', which is a log base 2 of
the number of bytes.
To fix these problems, this patch introduces 'cur_ua' to hold the
current user address and uses that in the find_linux_pte() call;
introduces 'pteshift' to hold the hugepage shift found by
find_linux_pte(); and compares 'pteshift' with 'compshift +
PAGE_SHIFT' rather than 'compshift'.
The patch also moves the local_irq_restore to the point after the PTE
pointer returned by find_linux_pte() has been dereferenced because
otherwise the PTE could change underneath us, and adds a check to
avoid doing the find_linux_pte() call once mem->pageshift has been
reduced to PAGE_SHIFT, as an optimization.
Fixes: 76fa4975f3ed ("KVM: PPC: Check if IOMMU page is contained in the pinned physical page")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The Nest MMU workaround is only needed for RW upgrades. Avoid doing
that for other PTE updates.
We also avoid clearing the PTE while marking it invalid. This is
because other page table walkers will find this PTE none and can
result in unexpected behaviour due to that. Instead we clear
_PAGE_PRESENT and set the software PTE bit _PAGE_INVALID.
pte_present() is already updated to check for both bits. This makes
sure page table walkers will find the PTE present and things like
pte_pfn(pte) returns the right value.
Based on an original patch from Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
LLVM/clang/eBPF: (Arnaldo Carvalho de Melo)
- Allow passing options to llc in addition to to clang.
Hardware tracing: (Jack Henschel)
- Improve error message for PMU address filters, clarifying availability of
that feature in hardware having hardware tracing such as Intel PT.
Python interface: (Jiri Olsa)
- Fix read_on_cpu() interface.
ELF/DWARF libraries: (Jiri Olsa)
- Fix handling of the combo compressed module file + decompressed associated
debuginfo file.
Build (Rasmus Villemoes)
- Disable parallelism for 'make clean', avoiding multiple submakes deleting
the same files and causing the build to fail on systems such as Yocto.
Kernel ABI copies: (Arnaldo Carvalho de Melo)
- Update tools's copy of x86's cpufeatures.h.
- Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'.
Miscellaneous: (Steven Rostedt)
- Change libtraceevent to SPDX License format.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Another panel that reports "DFP 1.x compliant TMDS" but it supports 6bpc
instead of 8 bpc.
Apply 6 bpc quirk for the panel to fix it.
BugLink: https://bugs.launchpad.net/bugs/1788308
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180823055332.7723-1-kai.heng.feng@canonical.com
|
|
My fix for a recursive Kconfig dependency caused another issue where the
ACPI specific options end up in the top-level menu in 'menuconfig'. This
was an unintended side-effect of having a silent option between
'menuconfig ACPI' and 'if ACPI'.
Moving the ARCH_SUPPORTS_ACPI symbol ahead of the ACPI menu solves that
problem and restores the previous presentation.
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 2c870e61132c (arm64: fix ACPI dependencies)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When splitting a huge pmd pte, we need to mark the pmd entry invalid. We
can do that by clearing _PAGE_PRESENT bit. But then that will be taken as a
swap pte. In order to differentiate between the two use a software pte bit
when invalidating.
For regular pte, due to bd5050e38aec ("powerpc/mm/radix: Change pte relax
sequence to handle nest MMU hang") we need to mark the pte entry invalid when
relaxing access permission. Instead of marking pte_none which can result in
different page table walk routines possibly skipping this pte entry, invalidate
it but still keep it marked present.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 5769beaf180a8 ("powerpc/mm: Add proper pte access check helper
for other platforms") replaced generic pte_access_permitted() by an
arch specific one.
The generic one is defined as
(pte_present(pte) && (!(write) || pte_write(pte)))
The arch specific one is open coded checking that _PAGE_USER and
_PAGE_WRITE (_PAGE_RW) flags are set, but lacking to check that
_PAGE_RO and _PAGE_PRIVILEGED are unset, leading to a useless test
on targets like the 8xx which defines _PAGE_RW and _PAGE_USER as 0.
Commit 5fa5b16be5b31 ("powerpc/mm/hugetlb: Use pte_access_permitted
for hugetlb access check") replaced some tests performed with
pte helpers by a call to pte_access_permitted(), leading to the same
issue.
This patch rewrites powerpc/nohash pte_access_permitted()
using pte helpers.
Fixes: 5769beaf180a8 ("powerpc/mm: Add proper pte access check helper for other platforms")
Fixes: 5fa5b16be5b31 ("powerpc/mm/hugetlb: Use pte_access_permitted for hugetlb access check")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The patch 736ec752d95e: "AppArmor: policy routines for loading and
unpacking policy" from Jul 29, 2010, leads to the following static
checker warning:
security/apparmor/policy_unpack.c:410 verify_accept()
warn: bitwise AND condition is false here
security/apparmor/policy_unpack.c:413 verify_accept()
warn: bitwise AND condition is false here
security/apparmor/policy_unpack.c
392 #define DFA_VALID_PERM_MASK 0xffffffff
393 #define DFA_VALID_PERM2_MASK 0xffffffff
394
395 /**
396 * verify_accept - verify the accept tables of a dfa
397 * @dfa: dfa to verify accept tables of (NOT NULL)
398 * @flags: flags governing dfa
399 *
400 * Returns: 1 if valid accept tables else 0 if error
401 */
402 static bool verify_accept(struct aa_dfa *dfa, int flags)
403 {
404 int i;
405
406 /* verify accept permissions */
407 for (i = 0; i < dfa->tables[YYTD_ID_ACCEPT]->td_lolen; i++) {
408 int mode = ACCEPT_TABLE(dfa)[i];
409
410 if (mode & ~DFA_VALID_PERM_MASK)
411 return 0;
412
413 if (ACCEPT_TABLE2(dfa)[i] & ~DFA_VALID_PERM2_MASK)
414 return 0;
fixes: 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
into drm-next
Fixes for 4.19:
- Fix build when KCOV is enabled
- Misc display fixes
- A couple of SR-IOV fixes
- Fence fixes for eviction handling for KFD
- Misc other fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822203813.2733-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Add an unprepare delay to the tv123wam panel (Sean)
- Update seanpaul's email in MAINTAINERS (Sean)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822193850.GA214158@art_vandelay
|
|
Revert commits:
95b0e6357d3e x86/mm/tlb: Always use lazy TLB mode
64482aafe55f x86/mm/tlb: Only send page table free TLB flush to lazy TLB CPUs
ac0315896970 x86/mm/tlb: Make lazy TLB mode lazier
61d0beb5796a x86/mm/tlb: Restructure switch_mm_irqs_off()
2ff6ddf19c0e x86/mm/tlb: Leave lazy TLB mode at page table free time
In order to simplify the TLB invalidate fixes for x86 and unify the
parts that need backporting. We'll try again later.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6")
recently exposed a brittle part of the build for supporting non-gcc
compilers.
Both Clang and ICC define __GNUC__, __GNUC_MINOR__, and
__GNUC_PATCHLEVEL__ for quick compatibility with code bases that haven't
added compiler specific checks for __clang__ or __INTEL_COMPILER.
This is brittle, as they happened to get compatibility by posing as a
certain version of GCC. This broke when upgrading the minimal version
of GCC required to build the kernel, to a version above what ICC and
Clang claim to be.
Rather than always including compiler-gcc.h then undefining or
redefining macros in compiler-intel.h or compiler-clang.h, let's
separate out the compiler specific macro definitions into mutually
exclusive headers, do more proper compiler detection, and keep shared
definitions in compiler_types.h.
Fixes: cafa0010cd51 ("Raise the minimum required gcc version to 4.6")
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Eli Friedman <efriedma@codeaurora.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During review, it was found that the target, service, and srchost
keywords are easily conflated. Add an explainer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: The global callback_cred is no longer used, so it can be
removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
I've had trouble when operating a multi-homed Linux NFS server with
Kerberos using NFSv4.0. Lately, I've seen my clients reporting
this (and then hanging):
May 9 11:43:26 manet kernel: NFS: NFSv4 callback contains invalid cred
The client-side commit f11b2a1cfbf5 ("nfs4: copy acceptor name from
context to nfs_client") appears to be related, but I suspect this
problem has been going on for some time before that.
RFC 7530 Section 3.3.3 says:
> For Kerberos V5, nfs/hostname would be a server principal in the
> Kerberos Key Distribution Center database. This is the same
> principal the client acquired a GSS-API context for when it issued
> the SETCLIENTID operation ...
In other words, an NFSv4.0 client expects that the server will use
the same GSS principal for callback that the client used to
establish its lease. For example, if the client used the service
principal "nfs@server.domain" to establish its lease, the server
is required to use "nfs@server.domain" when performing NFSv4.0
callback operations.
The Linux NFS server currently does not. It uses a common service
principal for all callback connections. Sometimes this works as
expected, and other times -- for example, when the server is
accessible via multiple hostnames -- it won't work at all.
This patch scrapes the target name from the client credential,
and uses that for the NFSv4.0 callback credential. That should
be correct much more often.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
NFSv4.0 callback needs to know the GSS target name the client used
when it established its lease. That information is available from
the GSS context created by gssproxy. Make it available in each
svc_cred.
Note this will also give us access to the real target service
principal name (which is typically "nfs", but spec does not require
that).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
A multi-homed NFS server may have more than one "nfs" key in its
keytab. Enable the kernel to pick the key it wants as a machine
credential when establishing a GSS context.
This is useful for GSS-protected NFSv4.0 callbacks, which are
required by RFC 7530 S3.3.3 to use the same principal as the service
principal the client used when establishing its lease.
A complementary modification to rpc.gssd is required to fully enable
this feature.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Fedora got a bug report from NFS:
kernel BUG at include/linux/scatterlist.h:143!
...
RIP: 0010:sg_init_one+0x7d/0x90
..
make_checksum+0x4e7/0x760 [rpcsec_gss_krb5]
gss_get_mic_kerberos+0x26e/0x310 [rpcsec_gss_krb5]
gss_marshal+0x126/0x1a0 [auth_rpcgss]
? __local_bh_enable_ip+0x80/0xe0
? call_transmit_status+0x1d0/0x1d0 [sunrpc]
call_transmit+0x137/0x230 [sunrpc]
__rpc_execute+0x9b/0x490 [sunrpc]
rpc_run_task+0x119/0x150 [sunrpc]
nfs4_run_exchange_id+0x1bd/0x250 [nfsv4]
_nfs4_proc_exchange_id+0x2d/0x490 [nfsv4]
nfs41_discover_server_trunking+0x1c/0xa0 [nfsv4]
nfs4_discover_server_trunking+0x80/0x270 [nfsv4]
nfs4_init_client+0x16e/0x240 [nfsv4]
? nfs_get_client+0x4c9/0x5d0 [nfs]
? _raw_spin_unlock+0x24/0x30
? nfs_get_client+0x4c9/0x5d0 [nfs]
nfs4_set_client+0xb2/0x100 [nfsv4]
nfs4_create_server+0xff/0x290 [nfsv4]
nfs4_remote_mount+0x28/0x50 [nfsv4]
mount_fs+0x3b/0x16a
vfs_kern_mount.part.35+0x54/0x160
nfs_do_root_mount+0x7f/0xc0 [nfsv4]
nfs4_try_mount+0x43/0x70 [nfsv4]
? get_nfs_version+0x21/0x80 [nfs]
nfs_fs_mount+0x789/0xbf0 [nfs]
? pcpu_alloc+0x6ca/0x7e0
? nfs_clone_super+0x70/0x70 [nfs]
? nfs_parse_mount_options+0xb40/0xb40 [nfs]
mount_fs+0x3b/0x16a
vfs_kern_mount.part.35+0x54/0x160
do_mount+0x1fd/0xd50
ksys_mount+0xba/0xd0
__x64_sys_mount+0x21/0x30
do_syscall_64+0x60/0x1f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This is BUG_ON(!virt_addr_valid(buf)) triggered by using a stack
allocated buffer with a scatterlist. Convert the buffer for
rc4salt to be dynamically allocated instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1615258
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- The driver for Silead touchscreen configurations has been renamed
from silead_dmi to touchscreen_dmi since it starts supporting other
touchscreens which require some DMI quirks
It also gets expanded to cover cases for Chuwi Vi10, ONDA V891W,
Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets.
- Another bunch of changes is related to Mellanox platform code to
allow user space to communicate with Mellanox for system control and
monitoring purposes. The driver notifies user on hotplug device
signal receiving.
- ASUS WMI drivers recognize lid flip action on UX360, and correctly
toggles airplane mode LED. In addition the keyboard backlight toggle
gets support.
- ThinkPad ACPI driver enables support for calculator key (on at least
P52). It also has been fixed to support three characters model
designators, which are used for modern laptops. Earlier the battery,
marked as BAT1, on ThinkPad laptops has not been configured properly,
which is fixed. On the opposite the multi-battery configurations now
probed correctly.
- Dell SMBIOS driver starts working on some Dell servers which do not
support token interface. The regression with backlight detection has
also been fixed. In order to support dock mode on some laptops, Intel
virtual button driver has been fixed. The last but not least is the
fix to Intel HID driver due to changes in Dell systems that prevented
to use power button.
* tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86: (47 commits)
platform/x86: acer-wmi: Silence "unsupported" message a bit
platform/x86: intel_punit_ipc: fix build errors
platform/x86: ideapad: Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill
platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360
platform/x86: acer-wmi: refactor function has_cap
platform/x86: thinkpad_acpi: Fix multi-battery bug
platform/x86: thinkpad_acpi: extend battery quirk coverage
platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet
platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init()
platform/x86: mlx-platform: Remove unused define
platform/x86: mlx-platform: Change mlxreg-io configuration for MSN274x systems
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/x86: mlx-platform: Allow mlxreg-io driver activation for more systems
platform/x86: mlx-platform: Add ASIC hotplug device configuration
platform/mellanox: mlxreg-hotplug: Add hotplug hwmon uevent notification
platform/mellanox: mlxreg-hotplug: Improve mechanism of ASIC health discovery
platform/x86: mlx-platform: Add mlxreg-fan platform driver activation
platform/x86: dell-laptop: Fix backlight detection
platform/x86: toshiba_acpi: Fix defined but not used build warnings
platform/x86: thinkpad_acpi: Support battery quirk
...
|
|
This has been broken for an embarassingly long time (since v4.4).
Just needs a couple of __init tags on functions to make the sections
match up.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We need to do this inside the loop as well, or we can allow new
IO to supersede previous IO.
Tested-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need the memory barrier before checking the list head,
use the appropriate helper for this. The matching queue
side memory barrier is provided by set_current_state().
Tested-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Check it in one place, instead of in multiple places.
Tested-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc updates from Helge Deller:
- fix boot failure of 64-bit kernel. It got broken by the unwind
optimization commit in merge window.
- fix 64-bit userspace support (static 64-bit applications only, e.g.
we don't yet have 64-bit userspace support in glibc).
- consolidate unwind initialization code.
- add machine model description to stack trace.
* 'parisc-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Add hardware description to stack traces
parisc: Fix boot failure of 64-bit kernel
parisc: Consolidate unwind initialization calls
parisc: Update comments in syscall.S regarding wide userland
parisc: Fix ptraced 64-bit applications to call 64-bit syscalls
parisc: Restore possibility to execute 64-bit applications
|
|
The writeback thread would exit with a lock held when the cache device
is detached via sysfs interface, fix it by releasing the held lock
before exiting the while-loop.
Fixes: fadd94e05c02 (bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set)
Signed-off-by: Shan Hai <shan.hai@oracle.com>
Signed-off-by: Coly Li <colyli@suse.de>
Tested-by: Shenghui Wang <shhuiw@foxmail.com>
Cc: stable@vger.kernel.org #4.17+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull Xtensa updates from Max Filippov:
- switch xtensa arch to the generic noncoherent direct mapping
operations
- add support for DMA_ATTR_NO_KERNEL_MAPPING attribute
- clean up users of platform/hardware.h in generic Xtensa code
- fix assembly cache maintenance code for long cache lines
- rework noMMU cache attributes initialization
- add big-endian HiFi2 test_kc705_be CPU variant
* tag 'xtensa-20180820' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: add test_kc705_be variant
xtensa: clean up boot-elf/bootstrap.S
xtensa: make bootparam parsing optional
xtensa: drop variant IRQ support
xtensa: drop unneeded platform/hardware.h headers
xtensa: move PLATFORM_NR_IRQS to Kconfig
xtensa: rework {CONFIG,PLATFORM}_DEFAULT_MEM_START
xtensa: drop unused {CONFIG,PLATFORM}_DEFAULT_MEM_SIZE
xtensa: rework noMMU cache attributes initialization
xtensa: increase ranges in ___invalidate_{i,d}cache_all
xtensa: limit offsets in __loop_cache_{all,page}
xtensa: platform-specific handling of coherent memory
xtensa: support DMA_ATTR_NO_KERNEL_MAPPING attribute
xtensa: use generic dma_noncoherent_ops
|
