summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-14drm/i915: Disable LTTPR detection on GLK once againVille Syrjälä
The glk display version change is causing us to again attempt LTTPR detection on glk. We must not do tha since glk doesn't have a long enough AUX timeout. Restore the correct logic to skip the detection. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-4-ville.syrjala@linux.intel.com
2021-04-14drm/i915: Restore lost glk ccs w/aVille Syrjälä
We lost a CCS related w/a on glk when the display version became 10 instead of 9. Restore the correct check. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-3-ville.syrjala@linux.intel.com
2021-04-14drm/i915: Restore lost glk FBC 16bpp w/aVille Syrjälä
We lost the FBC 16bpp 512byte stride requirement on glk when we switched from display version 9 to 10. Restore the w/a to avoid enabling FBC with a bad stride and thus display garbage. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-2-ville.syrjala@linux.intel.com
2021-04-14drm/i915/display: Eliminate IS_GEN9_{BC,LP}Matt Roper
Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the display code, we should also kill off our use of the IS_GEN9_* macros too. We'll do the conversion manually this time instead of using Coccinelle since the most logical substitution can depend heavily on the code context, and sometimes we can keep the code simpler if we make additional adjustments such as swapping the order of if/else arms. v2: - Restore a lost negation in intel_pll_is_valid(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com (cherry picked from commit 70bfb30743d5da73058b0a2271e9c127a84fb494) [Jani: cherry picked to topic branch to reduce conflicts] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-04-09drm/i915/pmu: Check actual RC6 statusTvrtko Ursulin
RC6 support cannot be simply established by looking at the static device HAS_RC6() flag. There are cases which disable RC6 at driver load time so use the status of those check when deciding whether to enumerate the rc6 counter. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Eero T Tamminen <eero.t.tamminen@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210331101850.2582027-1-tvrtko.ursulin@linux.intel.com
2021-04-09drm/i915: Take request reference before arming the watchdog timerTvrtko Ursulin
Reference needs to be taken before arming the timer. Luckily, given the default timer period of 20s, the potential to hit the race is extremely unlikely. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 9b4d0598ee94 ("drm/i915: Request watchdog infrastructure") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210326105759.2387104-1-tvrtko.ursulin@linux.intel.com
2021-04-08drm/i915: Add Wa_14011060649Swathi Dhanavanthri
This is a permanent workaround for TGL,RKL,DG1 and ADLS. Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-5-lucas.demarchi@intel.com
2021-04-08drm/i915: Move Wa_16011163337 to gen12_ctx_workarounds_init()José Roberto de Souza
This WA is needed in all gen12 platforms, moving it to gen12_ctx_workarounds_init() allow us to remove the duplicated implementation. Also allow us to remove the tgl_ctx_workarounds_init() that after the WA move above was empty. Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-4-lucas.demarchi@intel.com
2021-04-08drm/i915/icl: add Wa_22010271021 for all gen11Caz Yokoyama
Wa_22010271021 does not apply only to EHL, but to all gen11 and other gen12 platforms. Gen12 is already covered in another code path, but we need to stop checking for EHL when handling gen11. Bspec: 33450, 52887 v2: Remove "gen11" suffix as it also applies to gen12 platforms Cc: Clinton Taylor <clinton.a.taylor@intel.com> Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-3-lucas.demarchi@intel.com
2021-04-08drm/i915/gen12: Add recommended hardware tuning valueCaz Yokoyama
Follow Bspec 31870 to set recommended tuning values for certain GT register. These values aren't workarounds per-se, but it's best to handle them in the same general area of the driver, especially since there may be real workarounds that update other bits of the same registers. At the moment the only value we need to worry about is the TDS_TIMER setting in FF_MODE2. This setting was previously described as "Wa_1604555607" on some platforms, but the spec tells us that we should continue to program this on all current gen12 platforms, even those that do not have that WA. Bspec: 31870 v2: Rephrase some comments to make them clearer (Matt) Cc: Clinton Taylor <clinton.a.taylor@intel.com> Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-2-lucas.demarchi@intel.com
2021-04-08Merge tag 'drm-intel-next-2021-04-01' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Features: - Add support for FBs requiring a power-of-two stride padding (Imre) Refactoring: - Disassociate display version from gen (Matt) - Refactor legacy DP and HDMI code to separate files (Ville) - Refactor FB plane code to a separate file (Imre) - Refactor VBT child device info parsing and usage (Jani) - Refactor KBL/TGL/ADL-S display and gt stepping schemes (Jani) Fixes: - DP Link-Training Tunable PHY Repeaters (LTTPR) fixes (Imre) - HDCP fixes (Anshuman) - DP 2.0 HDMI 2.1 PCON Fixed Rate Link (FRL) fixes (Ankit) - Set HDA link parameters in driver (Kai) - Fix enabled_planes bitmask (Ville) - Fix transposed arguments to skl_plane_wm_level() (Ville) - Stop adding planes to the commit needlessly (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87v996ml17.fsf@intel.com
2021-04-08Merge tag 'drm-intel-gt-next-2021-04-06' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Prepare for local/device memory support on DG1 by starting to use it for kernel internal allocations: context, ring and engine scratch (Matt A, CQ, Abdiel, Imre) - Sandybridge fix to avoid hard hang on ring resume (Chris) - Limit imported dma-buf size to int32 (Matt A) - Double check heartbeat timeout before resetting (Chris) - Use new tasklet API for execution list (Emil) - Fix SPDX checkpats warnings (Chris) - Fixes for various checkpatch warnings (Chris) - Selftest improvements (Chris) - Move the defer_request waiter active assertion to correct spot (Chris) - Make local-memory probing a GT operation (Matt, Tvrtko) - Protect against request freeing during cancellation on wedging (Chris) - Retire unexpected starting state error dumping (Chris) - Distinction of memory regions in debugging (Zbigniew) - Always flush the submission queue on checking for idle (Chris) - Consolidate 2big error check to helper (Matt) - Decrease number of subplatform bits (Tvrtko) - Remove unused internal request priority levels (Chris) - Document the unused internal header bits in buddy allocator (Matt) - Cleanup the region class/instance encoding (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
2021-04-08Merge tag 'mediatek-drm-next-5.13' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.13 1. Fine tune the line time for EOTp. 2. Add support mt8192 dpi. 3. Make crtc config-updating atomic. 4. Don't support hdmi connector creation. From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210405082248.3578-1-chunkuang.hu@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-04-07Merge tag 'drm-misc-next-2021-04-01' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - mst: Improve topology logging - edid: Rework and improvements for displayid Driver Changes: - anx7625: Regulators support - bridge: Support for the Chipone ICN6211, Lontium LT8912B - lt9611: Fix 4k panels handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210401110552.2b3yetlgsjtlotcn@gilmour
2021-04-01drm/mediatek: Don't support hdmi connector creationDafna Hirschfeld
commit f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges") broke the display support for elm device since mtk_dpi calls drm_bridge_attach with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR while mtk_hdmi does not yet support this flag. Fix this by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in bridge attachment. Implement the drm_bridge_funcs .detect() and .get_edid() operations, and call drm_bridge_hpd_notify() to report HPD. This provides the necessary API to support disabling connector creation. In addition, the field 'conn' is removed from the mtk_hdmi struct since mtk_hdmi don't create a connector. It is replaced with a pointer 'curr_conn' that points to the current connector which can be access through the global state. This patch is inspired by a similar patch for bridge/synopsys/dw-hdmi.c: commit ec971aaa6775 ("drm: bridge: dw-hdmi: Make connector creation optional") But with the difference that in mtk-hdmi only the option of not creating a connector is supported. Fixes: f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2021-04-01drm/mediatek: Switch the hdmi bridge ops to the atomic versionsDafna Hirschfeld
The bridge operation '.enable' and the audio cb '.get_eld' access hdmi->conn. In the future we will want to support the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR and then we will not have direct access to the connector. The atomic version '.atomic_enable' allows accessing the current connector from the state. This patch switches the bridge to the atomic version to prepare access to the connector in later patches. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2021-04-01drm/bridge: anx7625: disable regulators when power offHsin-Yi Wang
When suspending the driver, anx7625_power_standby() will be called to turn off reset-gpios and enable-gpios. However, power supplies are not disabled. To save power, the driver can get the power supply regulators and turn off them in anx7625_power_standby(). Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210401053202.159302-2-hsinyi@chromium.org
2021-04-01dt-bindings: drm/bridge: anx7625: Add power suppliesHsin-Yi Wang
anx7625 requires 3 power supply regulators. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210401053202.159302-1-hsinyi@chromium.org
2021-04-01Merge tag 'exynos-drm-next-for-v5.13' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next One cleanup - Based on the patch[1], clean up the use of request_irq function series. [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?id=cbe16f35bee6880becca6f20d2ebf6b457148552 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1617092998-23645-1-git-send-email-inki.dae@samsung.com
2021-04-01Merge tag 'topic/i915-gem-next-2021-03-26' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm/drm into drm-next special i915-gem-next pull as requested - Conversion to dma_resv_locking, obj->mm.lock is gone (Maarten, with help from Thomas Hellström) - watchdog (Tvrtko, one patch to cancel individual request from Chris) - legacy ioctl cleanup (Jason+Ashutosh) - i915-gem TODO and RFC process doc (me) - i915_ prefix for vma_lookup (Liam Howlett) just because I spotted it and put it in here too Signed-off-by: Dave Airlie <airlied@redhat.com> From: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YF24MHoOSjpKFEXA@phenom.ffwll.local
2021-03-31drm/i915: Fix docbook header for __intel_runtime_pm_get_if_active()Imre Deak
Fix the Documentation/gpu/i915:22: /drivers/gpu/drm/i915/intel_runtime_pm.c:423: WARNING: Inline strong start-string without end-string. warning from the htmldocs build. Fixes: 9d58aa46291d ("drm/i915: Fix the GT fence revocation runtime PM logic") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20210330150118.1105079-1-imre.deak@intel.com
2021-03-31drm/displayid: rename displayid_hdr to displayid_headerJani Nikula
Avoid any confusion with High Dynamic Range. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ce083bd2789c7e22a91710726162287db88e3f6c.1617024940.git.jani.nikula@intel.com
2021-03-31drm/displayid: allow data blocks with 0 payload lengthJani Nikula
The DisplayID specifications explicitly call out 0 as a valid payload length for data blocks. The mere presence of a data block, or the information coded in the block specific data (bits 7:3 in offset 1), may be enough to convey the necessary information. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d562dff99ba7c92accb654a99b433bed471e8507.1617024940.git.jani.nikula@intel.com
2021-03-31drm/edid: use the new displayid iterator for tile infoJani Nikula
Neatly reduce displayid boilerplate in code. Remove excessive debug logging while at it, no other functional changes. The old displayid iterator becomes unused; remove it as well as make drm_find_displayid_extension() static. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fa4b5c790b5bdd82063545a6f209f8e9d78a63a7.1617024940.git.jani.nikula@intel.com
2021-03-31drm/edid: use the new displayid iterator for finding CEA extensionJani Nikula
Neatly reduce displayid boilerplate in code. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e50f876cecbfee369da887ad19350eee0d89b87f.1617024940.git.jani.nikula@intel.com
2021-03-31drm/edid: use the new displayid iterator for detailed modesJani Nikula
Neatly reduce displayid boilerplate in code. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f6c69c545c553c4a616887540660a4b8aecf0f7f.1617024940.git.jani.nikula@intel.com
2021-03-31drm/displayid: add new displayid section/block iteratorsJani Nikula
Iterating DisplayID blocks across sections (in EDID extensions) is unnecessarily complicated for the caller. Implement DisplayID iterators to go through all blocks in all sections. Usage example: const struct displayid_block *block; struct displayid_iter iter; displayid_iter_edid_begin(edid, &iter); displayid_iter_for_each(block, &iter) { /* operate on block */ } displayid_iter_end(&iter); When DisplayID is stored in EDID extensions, the DisplayID sections map to extensions as described in VESA DisplayID v1.3 Appendix B: DisplayID as an EDID Extension. This is implemented here. When DisplayID is stored in its dedicated DDC device 0xA4, according to VESA E-DDC v1.3, different rules apply for the structure. This is not implemented here, as we don't currently use it, but the idea is you'd have a different call for beginning the iteration, for example simply: displayid_iter_begin(displayid, &iter); instead of displayid_iter_edid_begin(), and everything else would be hidden away in the iterator functions. v2: - sizeof(struct displayid_block) -> sizeof(*block) (Ville) - remove __ prefix from displayid_iter_block Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/da3dead1752ab16c061f7bd248ac1a4268f7fefb.1617024940.git.jani.nikula@intel.com
2021-03-31drm/displayid: add separate drm_displayid.cJani Nikula
We'll be adding more DisplayID specific functions going forward, so start off by splitting out a few functions to a separate file. We don't bother with exporting the functions; at least for now they should be needed solely within drm.ko. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/07942d5011891b8e8f77245c78b34f4af97a9315.1617024940.git.jani.nikula@intel.com
2021-03-31drm/edid: make a number of functions, parameters and variables constJani Nikula
If there's no need to change it, it should be const. There's more to be done, but start off with changes that make follow-up work easier. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/41722f92ef81cd6adf65f936fcc5301418e1f94b.1617024940.git.jani.nikula@intel.com
2021-03-31drm/mediatek: Add missing MODULE_DEVICE_TABLE()Boris Brezillon
This patch adds the missing MODULE_DEVICE_TABLE definitions on different Mediatek drivers which generates correct modalias for automatic loading when these drivers are compiled as an external module. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2021-03-31drm/hdcp: DP HDCP2.2 errata LC_Send_L_Prime=16Anshuman Gupta
Fix LC_Send_L_Prime message timeout to 16 as documented in DP HDCP 2.2 errata page 3. https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324113012.7564-3-anshuman.gupta@intel.com
2021-03-31drm/i915/hdcp: Add DP HDCP2.2 timeout to read entire msgAnshuman Gupta
As documented in HDCP 2.2 DP Errata spec transmitter should abort the authentication protocol in case transmitter has not received the entire {AKE_Send_Cert, AKE_Send_H_prime, AKE_Send_Paring_Info} msg within {110,7,5} miliseconds. Adding above msg timeout values and aborting the HDCP authentication in case it timedout to read entire msg. https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf v2: - Removed redundant variable msg_can_timedout. [Ankit] Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324113012.7564-2-anshuman.gupta@intel.com
2021-03-31drm/i915/display: Configure HDMI2.1 Pcon for FRL only if Src-Ctl mode is ↵Ankit Nautiyal
available Add the check if source control mode is supported by the PCON, before starting configuring PCON for FRL training, as per spec VESA DP2.0-HDMI2.1 PCON Draft-1 Sec-7. v2: Added spec details for the change. (Uma) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210323112422.1211-3-ankit.k.nautiyal@intel.com
2021-03-31drm/dp_helper: Define options for FRL training for HDMI2.1 PCONAnkit Nautiyal
Currently the FRL training mode (Concurrent, Sequential) and training type (Normal, Extended) are not defined properly and are passed as bool values in drm_helpers for pcon configuration for FRL training. This patch: -Add register masks for Sequential and Normal FRL training options. -Fixes the drm_helpers for FRL Training configuration to use the appropriate masks. -Modifies the calls to the above drm_helpers in i915/intel_dp as per the above change. v2: Re-used the register masks for these options, instead of enum. (Ville) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210323112422.1211-2-ankit.k.nautiyal@intel.com
2021-03-29drm/i915/selftest: Add remap/rotate vma subtests when dst_stride!=width/heightImre Deak
Add selftests to test the POT stride padding functionality added in the previous patch. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-25-imre.deak@intel.com
2021-03-29drm/i915: Add support for FBs requiring a POT stride alignmentImre Deak
An upcoming platform has a restriction that the FB stride must be power-of-two aligned. To support framebuffer layouts that are not in this layout add a logic that pads the tile rows to the POT aligned size. The HW won't read the padding PTEs, so these don't have to point to an allocated address, or even have their valid flag set. So use a NULL PTE instead for instance the scratch page, which is simple and keeps the SG table compact. v2: - Simplify plane_view_dst_stride(). (Ville) - Pass pitch_tiles as unsigned int. v3: - Drop unintentional s/plane_state->rotation/plane_config->rotation/ change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-24-imre.deak@intel.com
2021-03-29drm/i915: s/stride/src_stride/ in the intel_remapped_plane_info structImre Deak
An upcoming patch adds a new dst_stride field to the intel_remapped_plane_info struct, so for clarity rename the current stride field to src_stride. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-23-imre.deak@intel.com
2021-03-29drm/i915/selftest: Unify use of intel_remapped_plane_info in ↵Imre Deak
igt_vma_rotate_remap() Always use the modified copy of the intel_remapped_plane_info variables. An upcoming patch updates the dst_stride field in these copies after which we can't use the original versions. v2: Init view in igt_vma_rotate_remap() when declaring it. (Ville) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-22-imre.deak@intel.com
2021-03-29drm/i915: Shrink the size of intel_remapped_plane_info structImre Deak
Save some place in the GTT VMAs by using a u16 instead of unsigned int to store the view dimensions. The maximum FB stride is 256kB which is 4096 tiles in the worst case (yf-tiles), the maximum FB height is 16k pixels, which is 16384 tiles in the worst case (linear 4x1 tiled FB). v2: - Fix worst case tile height formula in commit log. (Ville) - Add an assign_chk_ovf helper to simplify the related assignments. v3: - Enclose params of the assign_chk_ovf macro in parentheses. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-21-imre.deak@intel.com
2021-03-29drm/i915/intel_fb: Factor out calc_plane_remap_info()Imre Deak
Factor out to a new function the logic to calculate the FB remapping parameters both during creating the FB and when flipping to it. v2: - Keep stride next to offset calculation. (Ville) - Enclose check_array_bounds macro arguments in parentheses. v3: - Rebase on top of the struct intel_fb_view refactoring. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-20-imre.deak@intel.com
2021-03-29drm/i915: Simplify copying the FB view state to the plane stateImre Deak
Instead of copying separately the GTT remapped and color plane view info from the FB to the plane state, do this by copying the whole intel_fb_view struct. For this we make sure the FB view state is fully inited (that is also including the view type) already during FB creation, so this init is not required during atomic check time. This also means the we don't need to reset the unused color plane info during atomic check, as these are already reset during FB creation. I noticed that initial FBs will only work atm if they are page aligned (which BIOS most probably always ensures), but add a comment to sanitize this part once. Also we won't disable the plane if get_initial_plane_config() failed for some reason (for instance due to unsupported rotation), add a TODO: comment for this too. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-19-imre.deak@intel.com
2021-03-29drm/i915: Store the normal view FB pitch in FB's intel_fb_viewImre Deak
Instead of special casing getting the pitch for the normal view, store it during FB creation to the FB normal view struct and retrieve it from there during atomic check, as it's done for the rotated view. A follow-up patch does the same for a new FB remapped view. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-18-imre.deak@intel.com
2021-03-29drm/i915: Unify the FB and plane state view information into one structImre Deak
To allow the simplification of FB/plane view computation in the follow-up patches, unify the corresponding state in the intel_framebuffer and intel_plane_state structs into a new intel_fb_view struct. This adds some overhead to intel_framebuffer as the rotated view will have now space for 4 color planes instead of the required 2 and it'll also contain the unused offset for each color_plane info. Imo this is an acceptable trade-off to get a simplified way of the remap computation. Use the new intel_fb_view struct for the FB normal view as well, so (in the follow-up patches) we can remove the special casing for normal view calculation wrt. the calculation of remapped/rotated views. This also adds an overhead to the intel_framebuffer struct, as the gtt remap info and per-color plane offset/pitch is not required for the normal view, but imo this is an acceptable trade-off as above. The per-color plane pitch filed will be used by a follow-up patch, so we can retrieve the pitch for each view in the same way. No functional changes in this patch. v2: - Make the patch have _no functional change_. (fix skl_check_nv12_aux_surface() and skl_check_main_surface()). - s/i915_color_plane_view::pitch/stride/ (Ville) Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-17-imre.deak@intel.com
2021-03-29drm/i915/intel_fb: Factor out calc_plane_normal_size()Imre Deak
Factor out to a new function the logic to calculate an FB plane's normal-view size. Instead of using intel_remapped_plane_info, which is related only to remapping, add a helper to get the tile pitch and rows for an FB plane, so these helpers can be used both by the normal size calculation and the remapping code. Also add a new fb_plane_view_dims struct in which we can pass around the view (either FB plane or plane source) and tile dimensions conveniently to functions calculating further view parameters. v2: - Add back the +1 tile adjustment for x!=0 in calc_plane_normal_size(). (Ville) - s/pages/tiles/ in calc_plane_normal_size(). (Ville) - Add a helper for the plane view width calculation. (Ville) - Return tiles as unsigned int from calc_plane_normal_size(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-16-imre.deak@intel.com
2021-03-29drm/i915/intel_fb: Factor out calc_plane_aligned_offset()Imre Deak
Factor out to a new function the logic to convert the FB plane x/y values to a tile size based offset and new x/y relative to this offset. This makes intel_fill_fb_info() and intel_plane_remap_gtt() somewhat more readable. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-15-imre.deak@intel.com
2021-03-29drm/i915/intel_fb: Factor out convert_plane_offset_to_xy()Imre Deak
Factor out to a new function the logic to convert the FB plane offset to x/y and check the validity of x/y, with the goal to make intel_fill_fb_info() more readable. v2: Use &fb->base instead of a drm_fb alias. (Ville) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-14-imre.deak@intel.com
2021-03-29drm/i915/intel_fb: s/dev_priv/i915/Imre Deak
Rename dev_priv to i915 in the intel_fb.[ch] files. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-13-imre.deak@intel.com
2021-03-29drm/i915/intel_fb: Unexport intel_fb_check_stride()Imre Deak
After the previous patch we can unexport intel_fb_check_stride(), which isn't needed by intel_display.c. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-12-imre.deak@intel.com
2021-03-29drm/i915/intel_fb: Pull FB plane functions from intel_display.cImre Deak
Move the FB plane specific functions from intel_display.c to intel_fb.c. There's more functions like this, but I leave moving those as well for a follow up, and for now moving only the ones needed by the end of this patchset (adding support for padding tile-rows in an FB GGTT view). Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-11-imre.deak@intel.com
2021-03-29drm/i915/intel_fb: Pull FB plane functions from intel_sprite.cImre Deak
Move the FB plane specific function from intel_sprite.c to intel_fb.c Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-10-imre.deak@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:51:06 +0000