| Age | Commit message (Collapse) | Author |
|---|
|
Commit 2b21624fc232 ("hugetlb: freeze allocated pages before creating
hugetlb pages") changed the order page flags were cleared and set in the
head page. It moved the __ClearPageReserved after __SetPageHead.
However, there is a check to make sure __ClearPageReserved is never done
on a head page. If CONFIG_DEBUG_VM_PGFLAGS is enabled, the following BUG
will be hit when creating a hugetlb gigantic page:
page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
------------[ cut here ]------------
kernel BUG at include/linux/page-flags.h:500!
Call Trace will differ depending on whether hugetlb page is created
at boot time or run time.
Make sure to __ClearPageReserved BEFORE __SetPageHead.
Link: https://lkml.kernel.org/r/20221118195249.178319-1-mike.kravetz@oracle.com
Fixes: 2b21624fc232 ("hugetlb: freeze allocated pages before creating hugetlb pages")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Tarun Sahu <tsahu@linux.ibm.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b14051352465 ("mm/sl[au]b: generalize kmalloc subsystem")
refactored large parts of the kmalloc subsystem, resulting in the stack
trace pruning logic done by KFENCE to no longer work.
While b14051352465 attempted to fix the situation by including
'__kmem_cache_free' in the list of functions KFENCE should skip through,
this only works when the compiler actually optimized the tail call from
kfree() to __kmem_cache_free() into a jump (and thus kfree() _not_
appearing in the full stack trace to begin with).
In some configurations, the compiler no longer optimizes the tail call
into a jump, and __kmem_cache_free() appears in the stack trace. This
means that the pruned stack trace shown by KFENCE would include kfree()
which is not intended - for example:
| BUG: KFENCE: invalid free in kfree+0x7c/0x120
|
| Invalid free of 0xffff8883ed8fefe0 (in kfence-#126):
| kfree+0x7c/0x120
| test_double_free+0x116/0x1a9
| kunit_try_run_case+0x90/0xd0
| [...]
Fix it by moving __kmem_cache_free() to the list of functions that may be
tail called by an allocator entry function, making the pruning logic work
in both the optimized and unoptimized tail call cases.
Link: https://lkml.kernel.org/r/20221118152216.3914899-1-elver@google.com
Fixes: b14051352465 ("mm/sl[au]b: generalize kmalloc subsystem")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
SecPageTables has a tab after it instead of a space, this can break
fragile parsers that depend on spaces after the stat names.
Link: https://lkml.kernel.org/r/20221117043247.133294-1-yosryahmed@google.com
Fixes: ebc97a52b5d6cd5f ("mm: add NR_SECONDARY_PAGETABLE to count secondary page table uses.")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The page reclaim isolates a batch of folios from the tail of one of the
LRU lists and works on those folios one by one. For a suitable
swap-backed folio, if the swap device is async, it queues that folio for
writeback. After the page reclaim finishes an entire batch, it puts back
the folios it queued for writeback to the head of the original LRU list.
In the meantime, the page writeback flushes the queued folios also by
batches. Its batching logic is independent from that of the page reclaim.
For each of the folios it writes back, the page writeback calls
folio_rotate_reclaimable() which tries to rotate a folio to the tail.
folio_rotate_reclaimable() only works for a folio after the page reclaim
has put it back. If an async swap device is fast enough, the page
writeback can finish with that folio while the page reclaim is still
working on the rest of the batch containing it. In this case, that folio
will remain at the head and the page reclaim will not retry it before
reaching there.
This patch adds a retry to evict_folios(). After evict_folios() has
finished an entire batch and before it puts back folios it cannot free
immediately, it retries those that may have missed the rotation.
Before this patch, ~60% of folios swapped to an Intel Optane missed
folio_rotate_reclaimable(). After this patch, ~99% of missed folios were
reclaimed upon retry.
This problem affects relatively slow async swap devices like Samsung 980
Pro much less and does not affect sync swap devices like zram or zswap at
all.
Link: https://lkml.kernel.org/r/20221116013808.3995280-1-yuzhao@google.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: "Yin, Fengwei" <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add and also update email address, skakit@codeaurora.org is no longer
active.
Link: https://lkml.kernel.org/r/20221116105017.3018971-1-quic_c_skakit@quicinc.com
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
migrate_vma->cpages originally contained a count of the number of pages
migrating including non-present pages which can be populated directly on
the target.
Commit 241f68859656 ("mm/migrate_device.c: refactor migrate_vma and
migrate_device_coherent_page()") inadvertantly changed this to contain
just the number of pages that were unmapped. Usage of migrate_vma->cpages
isn't documented, but most drivers use it to see if all the requested
addresses can be migrated so restore the original behaviour.
Link: https://lkml.kernel.org/r/20221111005135.1344004-1-apopple@nvidia.com
Fixes: 241f68859656 ("mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add missing <linux/string.h> include for strcmp.
Clang 16 makes -Wimplicit-function-declaration an error by default.
Unfortunately, out of tree modules may use this in configure scripts,
which means failure might cause silent miscompilation or misconfiguration.
For more information, see LWN.net [0] or LLVM's Discourse [1], gentoo-dev@ [2],
or the (new) c-std-porting mailing list [3].
[0] https://lwn.net/Articles/913505/
[1] https://discourse.llvm.org/t/configure-script-breakage-with-the-new-werror-implicit-function-declaration/65213
[2] https://archives.gentoo.org/gentoo-dev/message/dd9f2d3082b8b6f8dfbccb0639e6e240
[3] hosted at lists.linux.dev.
[akpm@linux-foundation.org: remember "linux/"]
Link: https://lkml.kernel.org/r/20221116182634.2823136-1-sam@gentoo.org
Signed-off-by: Sam James <sam@gentoo.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use my personal email address.
Link: https://lkml.kernel.org/r/20221114001302.671897-2-alex.hung@amd.com
Signed-off-by: Alex Hung <alexhung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I am no longer at Canonical and add entry of my personal email address.
Link: https://lkml.kernel.org/r/20221114001302.671897-1-alex.hung@amd.com
Signed-off-by: Alex Hung <alexhung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the struct_mm input, mm, was changed to a struct ma_state, mas, the
documentation for the function was never updated. This updates that
documentation reference.
Link: https://lkml.kernel.org/r/20221114003349.41235-1-ian@linux.cowan.aero
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A DAMON sysfs interface user can start DAMON with a scheme, remove the
sysfs directory for the scheme, and then ask update of the scheme's stats.
Because the schemes stats update logic isn't aware of the situation, it
results in an invalid memory access. Fix the bug by checking if the
scheme sysfs directory exists.
Link: https://lkml.kernel.org/r/20221114175552.1951-1-sj@kernel.org
Fixes: 0ac32b8affb5 ("mm/damon/sysfs: support DAMOS stats")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [v5.18]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The migrate_to_ram() callback should always succeed, but in rare cases can
fail usually returning VM_FAULT_SIGBUS. Commit 16ce101db85d
("mm/memory.c: fix race when faulting a device private page") incorrectly
stopped passing the return code up the stack. Fix this by setting the ret
variable, restoring the previous behaviour on migrate_to_ram() failure.
Link: https://lkml.kernel.org/r/20221114115537.727371-1-apopple@nvidia.com
Fixes: 16ce101db85d ("mm/memory.c: fix race when faulting a device private page")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Kswapd will reclaim memory when memory pressure is high, the annonymous
memory will be compressed and stored in the zpool if zswap is enabled.
The memcg_kmem_bypass() in get_obj_cgroup_from_page() will bypass the
kernel thread and cause the compressed memory not be charged to its memory
cgroup.
Remove the memcg_kmem_bypass() call and properly charge compressed memory
to its corresponding memory cgroup.
Link: https://lore.kernel.org/linux-mm/CALvZod4nnn8BHYqAM4xtcR0Ddo2-Wr8uKm9h_CHWUaXw7g_DCg@mail.gmail.com/
Link: https://lkml.kernel.org/r/20221114194828.100822-1-hannes@cmpxchg.org
Fixes: f4840ccfca25 ("zswap: memcg accounting")
Signed-off-by: Li Liguang <liliguang@baidu.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Shared memory segments can be created that are backed by hugetlb pages.
When this happens, the vmas associated with any mappings (shmat) are
marked VM_HUGETLB, yet the vm_ops for such mappings are provided by
ipc/shm (shm_vm_ops). There is a mechanism to call the underlying hugetlb
vm_ops, and this is done for most operations. However, it is not done for
open and close.
This was not an issue until the introduction of the hugetlb vma_lock.
This lock structure is pointed to by vm_private_data and the open/close
vm_ops help maintain this structure. The special hugetlb routine called
at fork took care of structure updates at fork time. However,
vma_splitting is not properly handled for ipc shared memory mappings
backed by hugetlb pages. This can result in a "kernel NULL pointer
dereference" BUG or use after free as two vmas point to the same lock
structure.
Update the shm open and close routines to always call the underlying open
and close routines.
Link: https://lkml.kernel.org/r/20221114210018.49346-1-mike.kravetz@oracle.com
Fixes: 8d9bfb260814 ("hugetlb: add vma based lock for pmd sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Doug Nelson <doug.nelson@intel.com>
Reported-by: <syzbot+83b4134621b7c326d950@syzkaller.appspotmail.com>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, in clang version of gcov code when module is getting removed
gcov_info_add() incorrectly adds the sfn_ptr->counter to all the
dst->functions and it result in the kernel panic in below crash report.
Fix this by properly handling it.
[ 8.899094][ T599] Unable to handle kernel write to read-only memory at virtual address ffffff80461cc000
[ 8.899100][ T599] Mem abort info:
[ 8.899102][ T599] ESR = 0x9600004f
[ 8.899103][ T599] EC = 0x25: DABT (current EL), IL = 32 bits
[ 8.899105][ T599] SET = 0, FnV = 0
[ 8.899107][ T599] EA = 0, S1PTW = 0
[ 8.899108][ T599] FSC = 0x0f: level 3 permission fault
[ 8.899110][ T599] Data abort info:
[ 8.899111][ T599] ISV = 0, ISS = 0x0000004f
[ 8.899113][ T599] CM = 0, WnR = 1
[ 8.899114][ T599] swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000ab8de000
[ 8.899116][ T599] [ffffff80461cc000] pgd=18000009ffcde003, p4d=18000009ffcde003, pud=18000009ffcde003, pmd=18000009ffcad003, pte=00600000c61cc787
[ 8.899124][ T599] Internal error: Oops: 9600004f [#1] PREEMPT SMP
[ 8.899265][ T599] Skip md ftrace buffer dump for: 0x1609e0
....
..,
[ 8.899544][ T599] CPU: 7 PID: 599 Comm: modprobe Tainted: G S OE 5.15.41-android13-8-g38e9b1af6bce #1
[ 8.899547][ T599] Hardware name: XXX (DT)
[ 8.899549][ T599] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[ 8.899551][ T599] pc : gcov_info_add+0x9c/0xb8
[ 8.899557][ T599] lr : gcov_event+0x28c/0x6b8
[ 8.899559][ T599] sp : ffffffc00e733b00
[ 8.899560][ T599] x29: ffffffc00e733b00 x28: ffffffc00e733d30 x27: ffffffe8dc297470
[ 8.899563][ T599] x26: ffffffe8dc297000 x25: ffffffe8dc297000 x24: ffffffe8dc297000
[ 8.899566][ T599] x23: ffffffe8dc0a6200 x22: ffffff880f68bf20 x21: 0000000000000000
[ 8.899569][ T599] x20: ffffff880f68bf00 x19: ffffff8801babc00 x18: ffffffc00d7f9058
[ 8.899572][ T599] x17: 0000000000088793 x16: ffffff80461cbe00 x15: 9100052952800785
[ 8.899575][ T599] x14: 0000000000000200 x13: 0000000000000041 x12: 9100052952800785
[ 8.899577][ T599] x11: ffffffe8dc297000 x10: ffffffe8dc297000 x9 : ffffff80461cbc80
[ 8.899580][ T599] x8 : ffffff8801babe80 x7 : ffffffe8dc2ec000 x6 : ffffffe8dc2ed000
[ 8.899583][ T599] x5 : 000000008020001f x4 : fffffffe2006eae0 x3 : 000000008020001f
[ 8.899586][ T599] x2 : ffffff8027c49200 x1 : ffffff8801babc20 x0 : ffffff80461cb3a0
[ 8.899589][ T599] Call trace:
[ 8.899590][ T599] gcov_info_add+0x9c/0xb8
[ 8.899592][ T599] gcov_module_notifier+0xbc/0x120
[ 8.899595][ T599] blocking_notifier_call_chain+0xa0/0x11c
[ 8.899598][ T599] do_init_module+0x2a8/0x33c
[ 8.899600][ T599] load_module+0x23cc/0x261c
[ 8.899602][ T599] __arm64_sys_finit_module+0x158/0x194
[ 8.899604][ T599] invoke_syscall+0x94/0x2bc
[ 8.899607][ T599] el0_svc_common+0x1d8/0x34c
[ 8.899609][ T599] do_el0_svc+0x40/0x54
[ 8.899611][ T599] el0_svc+0x94/0x2f0
[ 8.899613][ T599] el0t_64_sync_handler+0x88/0xec
[ 8.899615][ T599] el0t_64_sync+0x1b4/0x1b8
[ 8.899618][ T599] Code: f905f56c f86e69ec f86e6a0f 8b0c01ec (f82e6a0c)
[ 8.899620][ T599] ---[ end trace ed5218e9e5b6e2e6 ]---
Link: https://lkml.kernel.org/r/1668020497-13142-1-git-send-email-quic_mojha@quicinc.com
Fixes: e178a5beb369 ("gcov: clang support")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org> [5.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
filename from function call
Refactor the mm_khugepaged_scan_file tracepoint to move filename
dereference to the tracepoint definition, to maintain consistency with
other tracepoints[1].
[1]:lore.kernel.org/lkml/20221024111621.3ba17e2c@gandalf.local.home/
Link: https://lkml.kernel.org/r/20221026044524.54793-1-gautammenghani201@gmail.com
Fixes: d41fd2016ed07 ("mm/khugepaged: add tracepoint to hpage_collapse_scan_file()")
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix the below compiler warnings reported with 'make W=1 mm/'.
mm/page_ext.c:178: warning: Function parameter or member 'page_ext' not
described in 'page_ext_put'.
[quic_pkondeti@quicinc.com: better patch title]
Link: https://lkml.kernel.org/r/1667884582-2465-1-git-send-email-quic_charante@quicinc.com
Fixes: b1d5488a252dc9 ("mm: fix use-after free of page_ext after race with memory-offline")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavan Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzbot reported the below splat:
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 __alloc_pages_node include/linux/gfp.h:221 [inline]
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 hpage_collapse_alloc_page mm/khugepaged.c:807 [inline]
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 alloc_charge_hpage+0x802/0xaa0 mm/khugepaged.c:963
Modules linked in:
CPU: 1 PID: 3646 Comm: syz-executor210 Not tainted 6.1.0-rc1-syzkaller-00454-ga70385240892 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
RIP: 0010:__alloc_pages_node include/linux/gfp.h:221 [inline]
RIP: 0010:hpage_collapse_alloc_page mm/khugepaged.c:807 [inline]
RIP: 0010:alloc_charge_hpage+0x802/0xaa0 mm/khugepaged.c:963
Code: e5 01 4c 89 ee e8 6e f9 ae ff 4d 85 ed 0f 84 28 fc ff ff e8 70 fc ae ff 48 8d 6b ff 4c 8d 63 07 e9 16 fc ff ff e8 5e fc ae ff <0f> 0b e9 96 fa ff ff 41 bc 1a 00 00 00 e9 86 fd ff ff e8 47 fc ae
RSP: 0018:ffffc90003fdf7d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888077f457c0 RSI: ffffffff81cd8f42 RDI: 0000000000000001
RBP: ffff888079388c0c R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f6b48ccf700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6b48a819f0 CR3: 00000000171e7000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
collapse_file+0x1ca/0x5780 mm/khugepaged.c:1715
hpage_collapse_scan_file+0xd6c/0x17a0 mm/khugepaged.c:2156
madvise_collapse+0x53a/0xb40 mm/khugepaged.c:2611
madvise_vma_behavior+0xd0a/0x1cc0 mm/madvise.c:1066
madvise_walk_vmas+0x1c7/0x2b0 mm/madvise.c:1240
do_madvise.part.0+0x24a/0x340 mm/madvise.c:1419
do_madvise mm/madvise.c:1432 [inline]
__do_sys_madvise mm/madvise.c:1432 [inline]
__se_sys_madvise mm/madvise.c:1430 [inline]
__x64_sys_madvise+0x113/0x150 mm/madvise.c:1430
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f6b48a4eef9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6b48ccf318 EFLAGS: 00000246 ORIG_RAX: 000000000000001c
RAX: ffffffffffffffda RBX: 00007f6b48af0048 RCX: 00007f6b48a4eef9
RDX: 0000000000000019 RSI: 0000000000600003 RDI: 0000000020000000
RBP: 00007f6b48af0040 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6b48aa53a4
R13: 00007f6b48bffcbf R14: 00007f6b48ccf400 R15: 0000000000022000
</TASK>
The khugepaged code would pick up the node with the most hit as the preferred
node, and also tries to do some balance if several nodes have the same
hit record. Basically it does conceptually:
* If the target_node <= last_target_node, then iterate from
last_target_node + 1 to MAX_NUMNODES (1024 on default config)
* If the max_value == node_load[nid], then target_node = nid
But there is a corner case, paritucularly for MADV_COLLAPSE, that the
non-existing node may be returned as preferred node.
Assuming the system has 2 nodes, the target_node is 0 and the
last_target_node is 1, if MADV_COLLAPSE path is hit, the max_value may
be 0, then it may return 2 for target_node, but it is actually not
existing (offline), so the warn is triggered.
The node balance was introduced by commit 9f1b868a13ac ("mm: thp:
khugepaged: add policy for finding target node") to satisfy
"numactl --interleave=all". But interleaving is a mere hint rather than
something that has hard requirements.
So use nodemask to record the nodes which have the same hit record, the
hugepage allocation could fallback to those nodes. And remove
__GFP_THISNODE since it does disallow fallback. And if the nodemask
just has one node set, it means there is one single node has the most
hit record, the nodemask approach actually behaves like __GFP_THISNODE.
Link: https://lkml.kernel.org/r/20221108184357.55614-2-shy828301@gmail.com
Fixes: 7d8faaf15545 ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Suggested-by: Zach O'Keefe <zokeefe@google.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reported-by: <syzbot+0044b22d177870ee974f@syzkaller.appspotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During proactive reclaim, we sometimes observe severe overreclaim, with
several thousand times more pages reclaimed than requested.
This trace was obtained from shrink_lruvec() during such an instance:
prio:0 anon_cost:1141521 file_cost:7767
nr_reclaimed:4387406 nr_to_reclaim:1047 (or_factor:4190)
nr=[7161123 345 578 1111]
While he reclaimer requested 4M, vmscan reclaimed close to 16G, most of it
by swapping. These requests take over a minute, during which the write()
to memory.reclaim is unkillably stuck inside the kernel.
Digging into the source, this is caused by the proportional reclaim
bailout logic. This code tries to resolve a fundamental conflict: to
reclaim roughly what was requested, while also aging all LRUs fairly and
in accordance to their size, swappiness, refault rates etc. The way it
attempts fairness is that once the reclaim goal has been reached, it stops
scanning the LRUs with the smaller remaining scan targets, and adjusts the
remainder of the bigger LRUs according to how much of the smaller LRUs was
scanned. It then finishes scanning that remainder regardless of the
reclaim goal.
This works fine if priority levels are low and the LRU lists are
comparable in size. However, in this instance, the cgroup that is
targeted by proactive reclaim has almost no files left - they've already
been squeezed out by proactive reclaim earlier - and the remaining anon
pages are hot. Anon rotations cause the priority level to drop to 0,
which results in reclaim targeting all of anon (a lot) and all of file
(almost nothing). By the time reclaim decides to bail, it has scanned
most or all of the file target, and therefor must also scan most or all of
the enormous anon target. This target is thousands of times larger than
the reclaim goal, thus causing the overreclaim.
The bailout code hasn't changed in years, why is this failing now? The
most likely explanations are two other recent changes in anon reclaim:
1. Before the series starting with commit 5df741963d52 ("mm: fix LRU
balancing effect of new transparent huge pages"), the VM was
overall relatively reluctant to swap at all, even if swap was
configured. This means the LRU balancing code didn't come into play
as often as it does now, and mostly in high pressure situations
where pronounced swap activity wouldn't be as surprising.
2. For historic reasons, shrink_lruvec() loops on the scan targets of
all LRU lists except the active anon one, meaning it would bail if
the only remaining pages to scan were active anon - even if there
were a lot of them.
Before the series starting with commit ccc5dc67340c ("mm/vmscan:
make active/inactive ratio as 1:1 for anon lru"), most anon pages
would live on the active LRU; the inactive one would contain only a
handful of preselected reclaim candidates. After the series, anon
gets aged similarly to file, and the inactive list is the default
for new anon pages as well, making it often the much bigger list.
As a result, the VM is now more likely to actually finish large
anon targets than before.
Change the code such that only one SWAP_CLUSTER_MAX-sized nudge toward the
larger LRU lists is made before bailing out on a met reclaim goal.
This fixes the extreme overreclaim problem.
Fairness is more subtle and harder to evaluate. No obvious misbehavior
was observed on the test workload, in any case. Conceptually, fairness
should primarily be a cumulative effect from regular, lower priority
scans. Once the VM is in trouble and needs to escalate scan targets to
make forward progress, fairness needs to take a backseat. This is also
acknowledged by the myriad exceptions in get_scan_count(). This patch
makes fairness decrease gradually, as it keeps fairness work static over
increasing priority levels with growing scan targets. This should make
more sense - although we may have to re-visit the exact values.
Link: https://lkml.kernel.org/r/20220802162811.39216-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The Chinese translation of FPRs Note is not consistent with the original
English version, $v0/$v1 should be $fv0/$fv1, $a0/$a1 should be $fa0/$fa1,
fix them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Drop the request queue reference just acquired when __alloc_disk_node
failed.
Fixes: 6f8191fdf41d ("block: simplify disk shutdown")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221122072753.426077-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We face some regressions on a few IXP42x systems when
accessing flash, the following unrelated error prints
appear from the PCI driver:
ixp4xx-pci c0000000.pci: PCI: abort_handler addr = 0xff9ffb5f,
isr = 0x0, status = 0x22a0
ixp4xx-pci c0000000.pci: imprecise abort
(...)
It turns out that while bit 7 is masked "reserved" it is
not unused, so masking it off as zero is dangerous, and
breaks flash access on some systems such as the NSLU2.
Be more careful and avoid masking off any of the reserved
bits 7, 8, 9 or 30. Only keep masking EXP_WORD (bit 2)
on IXP43x which is necessary in some setups.
Fixes: 1c953bda90ca ("bus: ixp4xx: Add a driver for IXP4xx expansion bus")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221122134411.2030372-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After commit cbfecb927f42 ("fs: record I_DIRTY_TIME even if inode
already has I_DIRTY_INODE") writeback_single_inode can push inode with
I_DIRTY_TIME set to b_dirty_time list. In case of freeing inode with
I_DIRTY_TIME set this can happen after deletion of inode from i_io_list
at evict. Stack trace is following.
evict
fat_evict_inode
fat_truncate_blocks
fat_flush_inodes
writeback_inode
sync_inode_metadata(inode, sync=0)
writeback_single_inode(inode, wbc) <- wbc->sync_mode == WB_SYNC_NONE
This will lead to use after free in flusher thread.
Similar issue can be triggered if writeback_single_inode in the
stack trace update inode->i_io_list. Add explicit check to avoid it.
Fixes: cbfecb927f42 ("fs: record I_DIRTY_TIME even if inode already has I_DIRTY_INODE")
Reported-by: syzbot+6ba92bd00d5093f7e371@syzkaller.appspotmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Svyatoslav Feldsherov <feldsherov@google.com>
Link: https://lore.kernel.org/r/20221115202001.324188-1-feldsherov@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
nf_flow_table_block_setup and the driver TC_SETUP_FT call can modify the flow
block cb list while they are being traversed elsewhere, causing a crash.
Add a write lock around the calls to protect readers
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The commit 510841da1fcc ("netfilter: ipset: enforce documented limit to
prevent allocating huge memory") was too strict and prevented to add up to
64 clashing elements to a hash:net,iface type of set. This patch fixes the
issue and now the type behaves as documented.
Fixes: 510841da1fcc ("netfilter: ipset: enforce documented limit to prevent allocating huge memory")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new amd pstate driver command line option to enable driver passive
working mode via MSR and shared memory interface to request desired
performance within abstract scale and the power management firmware
(SMU) convert the perf requests into actual hardware pstates.
Also the `disable` parameter can disable the pstate driver loading by
adding `amd_pstate=disable` to kernel command line.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce the `amd_pstate` driver new working mode with
`amd_pstate=passive` added to kernel command line.
If there is no passive mode enabled by user, amd_pstate driver will be
disabled by default for now.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When the amd_pstate driver is built-in users still need a method to be
able enable or disable it depending upon their circumstance.
Add support for an early parameter to do this.
There is some performance degradation on a number of ASICs in the
passive mode. This performance issue was originally discovered in
shared memory systems but it has been proven that certain workloads
on MSR systems also suffer performance issues.
Set the amd-pstate driver as disabled by default to temporarily
mitigate the performance problem.
1) with `amd_pstate=disable`, pstate driver will be disabled to load at
kernel booting.
2) with `amd_pstate=passive`, pstate driver will be enabled and loaded
as non-autonomous working mode supported in the low-level power
management firmware.
3) If neither parameter is specified, the driver will be disabled by
default to avoid triggering performance regressions in certain ASICs
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently when the amd-pstate and acpi_cpufreq are both built into
kernel as module driver, amd-pstate will not be loaded by default
in this case.
Change amd-pstate driver as built-in type, it will resolve the loading
sequence problem to allow user to make amd-pstate driver as the default
cpufreq scaling driver.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
init
MSR_AMD_PERF_CTL is guaranteed to be 0 on a cold boot. However, on a
kexec boot, for instance, it may have a non-zero value (if the cpu was
in a non-P0 Pstate). In such cases, the cores with non-P0 Pstates at
boot will never be pushed to P0, let alone boost frequencies.
Kexec is a common workflow for reboot on Linux and this creates a
regression in performance. Fix it by explicitly setting the
MSR_AMD_PERF_CTL to 0 during amd_pstate driver init.
Cc: All applicable <stable@vger.kernel.org>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit 6d5afdc97ea71958287364a1f1d07e59ef151b11.
On a Pixel 6 device, it is observed that this commit increases
latency by approximately 50ms, or 20%, in migrating a task
that requires full CPU utilization from a LITTLE CPU to Fmax
on a big CPU. Reverting this change restores the latency back
to its original baseline value.
Fixes: 6d5afdc97ea7 ("cpufreq: schedutil: Move max CPU capacity to sugov_policy")
Signed-off-by: Sam Wu <wusamuel@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The blamed commit introduced the following smatch warning in the
function lan9662_otp_wait_flag_clear:
drivers/nvmem/lan9662-otpc.c:43 lan9662_otp_wait_flag_clear() warn: signedness bug returning '(-110)'
Fix this by changing the return type of the function
lan9662_otp_wait_flag_clear() to be int instead of bool.
Fixes: 9e8f208ad5229d ("nvmem: lan9662-otp: add support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063840.6357-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case of error, the function memremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063840.6357-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fix for v6.1-rc
This contains a tiny fix to align the driver compatible string in the
binding documentation with the one used in DTS.
- dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
"3rd set of IIO fixes for the 6.1 cycle.
Usual mixed bunch of driver fixes.
* sw-triggers
- Fix failure to cleanup up list registration in an error path.
* aspeed,adc
- Drop the trim valid dts property as it doesn't account for unprogrammed
OTP and that can be easily detected without it.
* avago,apds9960:
- Fix register address for gesture gain.
* bosch,bma400
- Fix a memory leak in an error path.
* rohm,rpr0521
- Fix missing dependency on IIO_BUFFER/IIO_TRIGGERED_BUFFER.
* ti,afe4403/4404
- Fix out of band read by moving reads down to where they are
used."
* tag 'iio-fixes-for-6.1c' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
iio: adc: aspeed: Remove the trim valid dts property.
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
iio: light: rpr0521: add missing Kconfig dependencies
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
iio: health: afe4403: Fix oob read in afe4403_read_raw
iio: light: apds9960: fix wrong register for gesture gain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into work-linus
Xu writes:
FPGA Manager changes for 6.1-final
Intel m10 bmc secure update
- Russ's change fixes Kconfig dependencies
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-6.1 branch)
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: m10bmc-sec: Fix kconfig dependencies
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Leitner <richard.leitner@skidata.com>
Link: https://lore.kernel.org/r/20221118224540.619276-573-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-574-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-575-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-576-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-577-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-578-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-579-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221118224540.619276-580-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-581-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-582-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221118224540.619276-583-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-584-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-585-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the process of switching USB config from rndis to other config,
if the hardware does not support the ->pullup callback, or the
hardware encounters a low probability fault, both of them may cause
the ->pullup callback to fail, which will then cause a system panic
(use after free).
The gadget drivers sometimes need to be unloaded regardless of the
hardware's behavior.
Analysis as follows:
=======================================================================
(1) write /config/usb_gadget/g1/UDC "none"
gether_disconnect+0x2c/0x1f8
rndis_disable+0x4c/0x74
composite_disconnect+0x74/0xb0
configfs_composite_disconnect+0x60/0x7c
usb_gadget_disconnect+0x70/0x124
usb_gadget_unregister_driver+0xc8/0x1d8
gadget_dev_desc_UDC_store+0xec/0x1e4
(2) rm /config/usb_gadget/g1/configs/b.1/f1
rndis_deregister+0x28/0x54
rndis_free+0x44/0x7c
usb_put_function+0x14/0x1c
config_usb_cfg_unlink+0xc4/0xe0
configfs_unlink+0x124/0x1c8
vfs_unlink+0x114/0x1dc
(3) rmdir /config/usb_gadget/g1/functions/rndis.gs4
panic+0x1fc/0x3d0
do_page_fault+0xa8/0x46c
do_mem_abort+0x3c/0xac
el1_sync_handler+0x40/0x78
0xffffff801138f880
rndis_close+0x28/0x34
eth_stop+0x74/0x110
dev_close_many+0x48/0x194
rollback_registered_many+0x118/0x814
unregister_netdev+0x20/0x30
gether_cleanup+0x1c/0x38
rndis_attr_release+0xc/0x14
kref_put+0x74/0xb8
configfs_rmdir+0x314/0x374
If gadget->ops->pullup() return an error, function rndis_close() will be
called, then it will causes a use-after-free problem.
=======================================================================
Fixes: 0a55187a1ec8 ("USB: gadget core: Issue ->disconnect() callback from usb_gadget_disconnect()")
Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com>
Signed-off-by: TaoXue <xuetao09@huawei.com>
Link: https://lore.kernel.org/r/20221121130805.10735-1-water.zhangjiantao@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
