summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-21MAINTAINERS: repair reference in USB IP DRIVER FOR HISILICON KIRIN 970Lukas Bulwahn
Commit 8de6b7edd493 ("phy: phy-hi3670-usb3: move driver from staging into phy") moves phy-hi3670-usb3.c from ./drivers/staging/hikey9xx/ to ./drivers/phy/hisilicon/, but the new file entry in MAINTAINERS refers to ./drivers/phy/hisilicon/phy-kirin970-usb3.c. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/phy/hisilicon/phy-kirin970-usb3.c Repair the file entry by referring to the right location. Fixes: 8de6b7edd493 ("phy: phy-hi3670-usb3: move driver from staging into phy") Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20210701093903.28733-1-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: typec: stusb160x: Don't block probing of consumer of "connector" nodesAmelie Delaunay
Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210716120718.20398-3-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: typec: stusb160x: register role switch before interrupt registrationAmelie Delaunay
During interrupt registration, attach state is checked. If attached, then the Type-C state is updated with typec_set_xxx functions and role switch is set with usb_role_switch_set_role(). If the usb_role_switch parameter is error or null, the function simply returns 0. So, to update usb_role_switch role if a device is attached before the irq is registered, usb_role_switch must be registered before irq registration. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210716120718.20398-2-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UASJulian Sikorski
LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates errors like: [ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN [ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00 [ 1151.588594] scsi host14: uas_eh_device_reset_handler start [ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1151.741398] scsi host14: uas_eh_device_reset_handler success [ 1181.785534] scsi host14: uas_eh_device_reset_handler start Signed-off-by: Julian Sikorski <belegdol+github@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: ehci: Prevent missed ehci interrupts with edge-triggered MSIDavid Jeffery
When MSI is used by the ehci-hcd driver, it can cause lost interrupts which results in EHCI only continuing to work due to a polling fallback. But the reliance of polling drastically reduces performance of any I/O through EHCI. Interrupts are lost as the EHCI interrupt handler does not safely handle edge-triggered interrupts. It fails to ensure all interrupt status bits are cleared, which works with level-triggered interrupts but not the edge-triggered interrupts typical from using MSI. To fix this problem, check if the driver may have raced with the hardware setting additional interrupt status bits and clear status until it is in a stable state. Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices") Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Jeffery <djeffery@redhat.com> Link: https://lore.kernel.org/r/20210715213744.GA44506@redhat Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: hub: Disable USB 3 device initiated lpm if exit latency is too highMathias Nyman
The device initiated link power management U1/U2 states should not be enabled in case the system exit latency plus one bus interval (125us) is greater than the shortest service interval of any periodic endpoint. This is the case for both U1 and U2 sytstem exit latencies and link states. See USB 3.2 section 9.4.9 "Set Feature" for more details Note, before this patch the host and device initiated U1/U2 lpm states were both enabled with lpm. After this patch it's possible to end up with only host inititated U1/U2 lpm in case the exit latencies won't allow device initiated lpm. If this case we still want to set the udev->usb3_lpm_ux_enabled flag so that sysfs users can see the link may go to U1/U2. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: hub: Fix link power management max exit latency (MEL) calculationsMathias Nyman
Maximum Exit Latency (MEL) value is used by host to know how much in advance it needs to start waking up a U1/U2 suspended link in order to service a periodic transfer in time. Current MEL calculation only includes the time to wake up the path from U1/U2 to U0. This is called tMEL1 in USB 3.1 section C 1.5.2 Total MEL = tMEL1 + tMEL2 +tMEL3 + tMEL4 which should additinally include: - tMEL2 which is the time it takes for PING message to reach device - tMEL3 time for device to process the PING and submit a PING_RESPONSE - tMEL4 time for PING_RESPONSE to traverse back upstream to host. Add the missing tMEL2, tMEL3 and tMEL4 to MEL calculation. Cc: <stable@kernel.org> # v3.5 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150122.1995966-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: typec: tipd: Don't block probing of consumer of "connector" nodesMartin Kepplinger
Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable <stable@vger.kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/r/20210714061807.5737-1-martin.kepplinger@puri.sm Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21xhci: Fix lost USB 2 remote wakeMathias Nyman
There's a small window where a USB 2 remote wake may be left unhandled due to a race between hub thread and xhci port event interrupt handler. When the resume event is detected in the xhci interrupt handler it kicks the hub timer, which should move the port from resume to U0 once resume has been signalled for long enough. To keep the hub "thread" running we set a bus_state->resuming_ports flag. This flag makes sure hub timer function kicks itself. checking this flag was not properly protected by the spinlock. Flag was copied to a local variable before lock was taken. The local variable was then checked later with spinlock held. If interrupt is handled right after copying the flag to the local variable we end up stopping the hub thread before it can handle the USB 2 resume. CPU0 CPU1 (hub thread) (xhci event handler) xhci_hub_status_data() status = bus_state->resuming_ports; <Interrupt> handle_port_status() spin_lock() bus_state->resuming_ports = 1 set_flag(HCD_FLAG_POLL_RH) spin_unlock() spin_lock() if (!status) clear_flag(HCD_FLAG_POLL_RH) spin_unlock() Fix this by taking the lock a bit earlier so that it covers the resuming_ports flag copy in the hub thread Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21Revert "usb: renesas-xhci: Fix handling of unknown ROM state"Moritz Fischer
This reverts commit d143825baf15f204dac60acdf95e428182aa3374. Justin reports some of his systems now fail as result of this commit: xhci_hcd 0000:04:00.0: Direct firmware load for renesas_usb_fw.mem failed with error -2 xhci_hcd 0000:04:00.0: request_firmware failed: -2 xhci_hcd: probe of 0000:04:00.0 failed with error -2 The revert brings back the original issue the commit tried to solve but at least unbreaks existing systems relying on previous behavior. Cc: stable@vger.kernel.org Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Justin Forbes <jmforbes@linuxtx.org> Reported-by: Justin Forbes <jmforbes@linuxtx.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Fixes: d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state") Link: https://lore.kernel.org/r/20210719070519.41114-1-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21drm/ttm: Force re-init if ttm_global_init() failsJason Ekstrand
If we have a failure, decrement the reference count so that the next call to ttm_global_init() will actually do something instead of assume everything is all set up. Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Fixes: 62b53b37e4b1 ("drm/ttm: use a static ttm_bo_global instance") Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210720181357.2760720-5-jason@jlekstrand.net Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-20ixgbe: Fix packet corruption due to missing DMA syncMarkus Boehme
When receiving a packet with multiple fragments, hardware may still touch the first fragment until the entire packet has been received. The driver therefore keeps the first fragment mapped for DMA until end of packet has been asserted, and delays its dma_sync call until then. The driver tries to fit multiple receive buffers on one page. When using 3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned off/build_skb is being used) on an architecture with 4K pages, the driver allocates an order 1 compound page and uses one page per receive buffer. To determine the correct offset for a delayed DMA sync of the first fragment of a multi-fragment packet, the driver then cannot just use PAGE_MASK on the DMA address but has to construct a mask based on the actual size of the backing page. Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration will always sync the first page of a compound page. With the SWIOTLB enabled this can lead to corrupted packets (zeroed out first fragment, re-used garbage from another packet) and various consequences, such as slow/stalling data transfers and connection resets. For example, testing on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled (e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle out without this patch. Cc: stable@vger.kernel.org Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path") Signed-off-by: Markus Boehme <markubo@amazon.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20s390: update defconfigsHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20s390/cpumf: fix semicolon.cocci warningskernel test robot
arch/s390/kernel/perf_cpum_cf.c:748:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: a029a4eab39e ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility") CC: Thomas Richter <tmricht@linux.ibm.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20s390/boot: fix use of expolines in the DMA codeAlexander Egorenkov
The DMA code section of the decompressor must be compiled with expolines if Spectre V2 mitigation has been enabled for the decompressed kernel. This is required because although the decompressor's image contains the DMA code section, it is handed over to the decompressed kernel for use. Because the DMA code is already slow w/o expolines, use expolines always regardless whether the decompressed kernel is using them or not. This simplifies the DMA code by dropping the conditional compilation of expolines. Fixes: bf72630130c2 ("s390: use proper expoline sections for .dma code") Cc: <stable@vger.kernel.org> # 5.2 Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20ceph: don't WARN if we're still opening a session to an MDSLuis Henriques
If MDSs aren't available while mounting a filesystem, the session state will transition from SESSION_OPENING to SESSION_CLOSING. And in that scenario check_session_state() will be called from delayed_work() and trigger this WARN. Avoid this by only WARNing after a session has already been established (i.e., the s_ttl will be different from 0). Fixes: 62575e270f66 ("ceph: check session state after bumping session->s_seq") Signed-off-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-07-20rbd: don't hold lock_rwsem while running_list is being drainedIlya Dryomov
Currently rbd_quiesce_lock() holds lock_rwsem for read while blocking on releasing_wait completion. On the I/O completion side, each image request also needs to take lock_rwsem for read. Because rw_semaphore implementation doesn't allow new readers after a writer has indicated interest in the lock, this can result in a deadlock if something that needs to take lock_rwsem for write gets involved. For example: 1. watch error occurs 2. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and releases lock_rwsem 3. after reestablishing the watch, rbd_reregister_watch() takes lock_rwsem for write and calls rbd_reacquire_lock() 4. rbd_quiesce_lock() downgrades lock_rwsem to for read and blocks on releasing_wait until running_list becomes empty 5. another watch error occurs 6. rbd_watch_errcb() blocks trying to take lock_rwsem for write 7. no in-flight image request can complete and delete itself from running_list because lock_rwsem won't be granted anymore A similar scenario can occur with "lock has been acquired" and "lock has been released" notification handers which also take lock_rwsem for write to update owner_cid. We don't actually get anything useful from sitting on lock_rwsem in rbd_quiesce_lock() -- owner_cid updates certainly don't need to be synchronized with. In fact the whole owner_cid tracking logic could probably be removed from the kernel client because we don't support proxied maintenance operations. Cc: stable@vger.kernel.org # 5.3+ URL: https://tracker.ceph.com/issues/42757 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
2021-07-20rbd: always kick acquire on "acquired" and "released" notificationsIlya Dryomov
Skipping the "lock has been released" notification if the lock owner is not what we expect based on owner_cid can lead to I/O hangs. One example is our own notifications: because owner_cid is cleared in rbd_unlock(), when we get our own notification it is processed as unexpected/duplicate and maybe_kick_acquire() isn't called. If a peer that requested the lock then doesn't go through with acquiring it, I/O requests that came in while the lock was being quiesced would be stalled until another I/O request is submitted and kicks acquire from rbd_img_exclusive_lock(). This makes the comment in rbd_release_lock() actually true: prior to this change the canceled work was being requeued in response to the "lock has been acquired" notification from rbd_handle_acquired_lock(). Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
2021-07-20ALSA: hda/hdmi: Add quirk to force pin connectivity on NUC10Kai Vehmanen
On some Intel NUC10 variants, codec reports AC_JACK_PORT_NONE as pin default config for all pins. This results in broken audio. Add a quirk to force connectivity. BugLink: https://github.com/clearlinux/distribution/issues/2396 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210720153216.2200938-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-20Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"Jia He
This reverts commit 6206b7981a36476f4695d661ae139f7db36a802d. That patch added additional spin_{un}lock_bh(), which was harmless but pointless. The orginal code path has guaranteed the pair of spin_{un}lock_bh(). We'd better revert it before we find the exact root cause of the bug_on mentioned in that patch. Fixes: 6206b7981a36 ("qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()") Cc: David S. Miller <davem@davemloft.net> Cc: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptionsPaolo Abeni
While running the self-tests on a KASAN enabled kernel, I observed a slab-out-of-bounds splat very similar to the one reported in commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions"). We additionally need to take care of fib6_metrics initialization failure when the caller provides an nh. The fix is similar, explicitly free the route instead of calling fib6_info_release on a half-initialized object. Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20fsl/fman: Add fibre supportMaxim Kochetkov
Set SUPPORTED_FIBRE to mac_dev->if_support. It allows proper usage of PHYs with optical/fiber support. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net/sched: act_skbmod: Skip non-Ethernet packetsPeilin Ye
Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2 protocol, which is not always the case. As an example, for CAN devices: $ ip link add dev vcan0 type vcan $ ip link set up vcan0 $ tc qdisc add dev vcan0 root handle 1: htb $ tc filter add dev vcan0 parent 1: protocol ip prio 10 \ matchall action skbmod swap mac Doing the above silently corrupts all the packets. Do not perform skbmod actions for non-Ethernet packets. Fixes: 86da71b57383 ("net_sched: Introduce skbmod action") Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20mt7530 mt7530_fdb_write only set ivl bit vid larger than 1Eric Woudstra
Fixes my earlier patch which broke vlan unaware bridges. The IVL bit now only gets set for vid's larger than 1. Fixes: 11d8d98cbeef ("mt7530 fix mt7530_fdb_write vid missing ivl bit") Signed-off-by: Eric Woudstra <ericwouds@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20Merge branch 'octeon-DMAC'David S. Miller
Subbaraya Sundeep says: ==================== octeontx2-af: Introduce DMAC based switching With this patch set packets can be switched between all CGX mapped PFs and VFs in the system based on the DMAC addresses. To implement this: AF allocates high priority rules from top entry(0) in MCAM. Rules are allocated for all the CGX mapped PFs and VFs though they are not active and with no NIXLFs attached. Rules for a PF/VF will be enabled only after they are brought up. Two rules one for TX and one for RX are allocated for each PF/VF. A packet sent from a PF/VF with a destination mac of another PF/VF will be hit by TX rule and sent to LBK channel 63. The same returned packet will be hit by RX rule whose action is to forward packet to PF/VF with that destination mac. Implementation of this for 98xx is tricky since there are two NIX blocks and till now a PF/VF can install rule for an NIX0/1 interface only if it is mapped to corresponding NIX0/1 block. Hence Tx rules are modified such that TX interface in MCAM entry can be either NIX0-TX or NIX1-TX. Testing: 1. Create two VFs over PF1(on NIX0) and assign two VFs to two VMs 2. Assign ip addresses to two VFs in VMs and PF2(on NIX1) in host. 3. Assign static arp entries in two VMs and PF2. 4. Ping between VMs and host PF2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20drm: Return -ENOTTY for non-drm ioctlsCharles Baylis
drm: Return -ENOTTY for non-drm ioctls Return -ENOTTY from drm_ioctl() when userspace passes in a cmd number which doesn't relate to the drm subsystem. Glibc uses the TCGETS ioctl to implement isatty(), and without this change isatty() returns it incorrectly returns true for drm devices. To test run this command: $ if [ -t 0 ]; then echo is a tty; fi < /dev/dri/card0 which shows "is a tty" without this patch. This may also modify memory which the userspace application is not expecting. Signed-off-by: Charles Baylis <cb-kernel@fishzet.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YPG3IBlzaMhfPqCr@stando.fishzet.co.uk
2021-07-20spi: spi-bcm2835: Fix deadlockAlexandru Tachici
The bcm2835_spi_transfer_one function can create a deadlock if it is called while another thread already has the CCF lock. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Fixes: f8043872e796 ("spi: add driver for BCM2835") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210716210245.13240-2-alexandru.tachici@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-20Merge branch 'net-hns3-fixes-for-net'Jakub Kicinski
Guangbin Huang says: ==================== net: hns3: fixes for -net This series includes some bugfixes for the HNS3 ethernet driver. ==================== Link: https://lore.kernel.org/r/1626685988-25869-1-git-send-email-huangguangbin2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20net: hns3: fix rx VLAN offload state inconsistent issueJian Shen
Currently, VF doesn't enable rx VLAN offload when initializating, and PF does it for VFs. If user disable the rx VLAN offload for VF with ethtool -K, and reload the VF driver, it may cause the rx VLAN offload state being inconsistent between hardware and software. Fixes it by enabling rx VLAN offload when VF initializing. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20net: hns3: disable port VLAN filter when support function level VLAN filter ↵Jian Shen
control For hardware limitation, port VLAN filter is port level, and effective for all the functions of the port. So if not support port VLAN bypass, it's necessary to disable the port VLAN filter, in order to support function level VLAN filter control. Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20net: hns3: add match_id to check mailbox response from PF to VFPeng Li
When VF need response from PF, VF will wait (1us - 1s) to receive the response, or it will wait timeout and the VF action fails. If VF do not receive response in 1st action because timeout, the 2nd action may receive response for the 1st action, and get incorrect response data.VF must reciveve the right response from PF,or it will cause unexpected error. This patch adds match_id to check mailbox response from PF to VF, to make sure VF get the right response: 1. The message sent from VF was labelled with match_id which was a unique 16-bit non-zero value. 2. The response sent from PF will label with match_id which got from the request. 3. The VF uses the match_id to match request and response message. This scheme depends on PF driver supports match_id, if PF driver doesn't support then VF will uses the original scheme. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20net: hns3: fix possible mismatches resp of mailboxChengwen Feng
Currently, the mailbox synchronous communication between VF and PF use the following fields to maintain communication: 1. Origin_mbx_msg which was combined by message code and subcode, used to match request and response. 2. Received_resp which means whether received response. There may possible mismatches of the following situation: 1. VF sends message A with code=1 subcode=1. 2. PF was blocked about 500ms when processing the message A. 3. VF will detect message A timeout because it can't get the response within 500ms. 4. VF sends message B with code=1 subcode=1 which equal message A. 5. PF processes the first message A and send the response message to VF. 6. VF will identify the response matched the message B because the code/subcode is the same. This will lead to mismatch of request and response. To fix the above bug, we use the following scheme: 1. The message sent from VF was labelled with match_id which was a unique 16-bit non-zero value. 2. The response sent from PF will label with match_id which got from the request. 3. The VF uses the match_id to match request and response message. As for PF driver, it only needs to copy the match_id from request to response. Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Chengwen Feng <fengchengwen@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20net: bridge: do not replay fdb entries pointing towards the bridge twiceVladimir Oltean
This simple script: ip link add br0 type bridge ip link set swp2 master br0 ip link set br0 address 00:01:02:03:04:05 ip link del br0 produces this result on a DSA switch: [ 421.306399] br0: port 1(swp2) entered blocking state [ 421.311445] br0: port 1(swp2) entered disabled state [ 421.472553] device swp2 entered promiscuous mode [ 421.488986] device swp2 left promiscuous mode [ 421.493508] br0: port 1(swp2) entered disabled state [ 421.886107] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 1 from fdb: -ENOENT [ 421.894374] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 0 from fdb: -ENOENT [ 421.943982] br0: port 1(swp2) entered blocking state [ 421.949030] br0: port 1(swp2) entered disabled state [ 422.112504] device swp2 entered promiscuous mode A very simplified view of what happens is: (1) the bridge port is created, and the bridge device inherits its MAC address (2) when joining, the bridge port (DSA) requests a replay of the addition of all FDB entries towards this bridge port and towards the bridge device itself. In fact, DSA calls br_fdb_replay() twice: br_fdb_replay(br, brport_dev); br_fdb_replay(br, br); DSA uses reference counting for the FDB entries. So the MAC address of the bridge is simply kept with refcount 2. When the bridge port leaves under normal circumstances, everything cancels out since the replay of the FDB entry deletion is also done twice per VLAN. (3) when the bridge MAC address changes, switchdev is notified of the deletion of the old address and of the insertion of the new one. But the old address does not really go away, since it had refcount 2, and the new address is added "only" with refcount 1. (4) when the bridge port leaves now, it will replay a deletion of the FDB entries pointing towards the bridge twice. Then DSA will complain that it can't delete something that no longer exists. It is clear that the problem is that the FDB entries towards the bridge are replayed too many times, so let's fix that problem. Fixes: 63c51453c82c ("net: dsa: replay the local bridge FDB entries pointing to the bridge dev too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210719093916.4099032-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20net: Update MAINTAINERS for MediaTek switch driverLanden Chao
Update maintainers for MediaTek switch driver with Deng Qingfang who has contributed many high-quality patches (interrupt, VLAN, GPIO, and etc.) and will help maintenance. Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/49e1aa8aac58dcbf1b5e036d09b3fa3bbb1d94d0.1626751861.git.landen.chao@mediatek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20net/tcp_fastopen: remove obsolete externEric Dumazet
After cited commit, sysctl_tcp_fastopen_blackhole_timeout is no longer a global variable. Fixes: 3733be14a32b ("ipv4: Namespaceify tcp_fastopen_blackhole_timeout knob") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Wei Wang <weiwan@google.com> Link: https://lore.kernel.org/r/20210719092028.3016745-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20ipv6: ip6_finish_output2: set sk into newly allocated nskbVasily Averin
skb_set_owner_w() should set sk not to old skb but to new nskb. Fixes: 5796015fa968 ("ipv6: allocate enough headroom in ip6_finish_output2()") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Link: https://lore.kernel.org/r/70c0744f-89ae-1869-7e3e-4fa292158f4b@virtuozzo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20ALSA: pcm: Fix mmap without buffer preallocationTakashi Iwai
The recent rewrite of the memory allocation helpers also changed the page extraction to a common helper, snd_sgbuf_get_page(). But this assumes implicitly that the buffer was allocated via the standard helper (usually via preallocation), and didn't consider the case of the manual buffer handling. This patch fixes it and also covers the manual buffer management. Fixes: 37af81c5998f ("ALSA: core: Abstract memory alloc helpers") Link: https://lore.kernel.org/r/20210720092732.12412-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-20ALSA: pcm: Fix mmap capability checkTakashi Iwai
The hw_support_mmap() doesn't cover all memory allocation types and might use a wrong device pointer for checking the capability. Check the all memory allocation types more completely. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210720092640.12338-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-20USB: serial: cp210x: fix comments for GE CS1000Ian Ray
Fix comments for GE CS1000 CP210x USB ID assignments. Fixes: 42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs") Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-07-20ALSA: hda: intel-dsp-cfg: add missing ElkhartLake PCI IDPierre-Louis Bossart
We missed the fact that ElkhartLake platforms have two different PCI IDs. We only added one so the SOF driver is never selected by the autodetection logic for the missing configuration. BugLink: https://github.com/thesofproject/linux/issues/2990 Fixes: cc8f81c7e625 ('ALSA: hda: fix intel DSP config') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210719231746.557325-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-19media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()Gustavo A. R. Silva
Fix an 11-year old bug in ngene_command_config_free_buf() while addressing the following warnings caught with -Warray-bounds: arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] The problem is that the original code is trying to copy 6 bytes of data into a one-byte size member _config_ of the wrong structue FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &com.cmd.ConfigureBuffers.config. It seems that the right structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains 6 more members apart from the header _hdr_. Also, the name of the function ngene_command_config_free_buf() suggests that the actual intention is to ConfigureFreeBuffers, instead of ConfigureBuffers (which takes place in the function ngene_command_config_buf(), above). Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as the destination address, instead of &com.cmd.ConfigureBuffers.config, when calling memcpy(). This also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Fixes: dae52d009fc9 ("V4L/DVB: ngene: Initial check-in") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/linux-hardening/20210420001631.GA45456@embeddedor/
2021-07-19seq_file: disallow extremely large seq buffer allocationsEric Sandeen
There is no reasonable need for a buffer larger than this, and it avoids int overflow pitfalls. Fixes: 058504edd026 ("fs/seq_file: fallback to vmalloc allocation") Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Qualys Security Advisory <qsa@qualys.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-19powerpc/pasemi: Fix fall-through warning for ClangGustavo A. R. Silva
Fix the following fallthrough warning: arch/powerpc/platforms/pasemi/idle.c:45:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/60efbf18.d9n6eXv275OJcc7T%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-19octeontx2-af: Introduce internal packet switchingSubbaraya Sundeep
As of now any communication between CGXs PFs and their VFs within the system is possible only by external switches sending packets back to the system. This patch adds internal switching support. Broadcast packet replication is not covered here. RVU admin function (AF) maintains MAC addresses of all interfaces in the system. When switching is enabled, MCAM entries are allocated to install rules such that packets with DMAC matching any of the internal interface MAC addresses is punted back into the system via the loopback channel. On the receive side the default unicast rules are modified to not check for ingress channel. So any packet with matching DMAC irrespective of which interface it is coming from will be forwarded to the respective PF/VF interface. The transmit side rules and default unicast rules are updated if user changes MAC address of an interface. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19octeontx2-af: Prepare for allocating MCAM rules for AFSubbaraya Sundeep
AF till now only manages the allocation and freeing of MCAM rules for other PF/VFs in system. To implement L2 switching between all CGX mapped PF and VFs, AF requires MCAM entries for DMAC rules for each PF and VF. This patch modifies AF driver such that AF can also allocate MCAM rules and install rules for other PFs and VFs. All the checks like channel verification for RX rules and PF_FUNC verification for TX rules are relaxed in case AF is allocating or installing rules. Also all the entry and counter to owner mappings are set to NPC_MCAM_INVALID_MAP when they are free indicating those are not allocated to AF nor PF/VFs. This patch also ensures that AF allocated and installed entries are displayed in debugfs. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19octeontx2-af: Enable transmit side LBK linkSubbaraya Sundeep
For enabling VF-VF switching the packets egressing out of CGX mapped VFs needed to be sent to LBK so that same packets are received back to the system. But the LBK link also needs to be enabled in addition to a VF's mapped CGX_LMAC link otherwise hardware raises send error interrupt indicating selected LBK link is not enabled in NIX_AF_TL3_TL2X_LINKX_CFG register. Hence this patch enables all LBK links in TL3_TL2_LINKX_CFG registers. Also to enable packet flow between PFs/VFs of NIX0 to PFs/VFs of NIX1(in 98xx silicon) the NPC TX DMAC rules has to be installed such that rules must be hit for any TX interface i.e., NIX0-TX or NIX1-TX provided DMAC match creteria is met. Hence this patch changes the behavior such that MCAM is programmed to match with any NIX0/1-TX interface for TX rules. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19net/tcp_fastopen: fix data races around tfo_active_disable_stampEric Dumazet
tfo_active_disable_stamp is read and written locklessly. We need to annotate these accesses appropriately. Then, we need to perform the atomic_inc(tfo_active_disable_times) after the timestamp has been updated, and thus add barriers to make sure tcp_fastopen_active_should_disable() wont read a stale timestamp. Fixes: cf1ef3f0719b ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19Merge branch 'dt-bindinga-dwmac'David S. Miller
Joakim Zhang says: ==================== dt-bindings: net: dwmac-imx: convert This patch set intends to convert imx dwmac binding to schema, and fixes found by dt_binding_check and dtbs_check. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19arm64: dts: imx8mp: change interrupt order per dt-bindingJoakim Zhang
This patch changs interrupt order which found by dtbs_check. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:0: 'macirq' was expected arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:1: 'eth_wake_irq' was expected According to Documentation/devicetree/bindings/net/snps,dwmac.yaml, we should list interrupt in it's order. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19dt-bindings: net: imx-dwmac: convert imx-dwmac bindings to yamlJoakim Zhang
In order to automate the verification of DT nodes covert imx-dwmac to nxp,dwmac-imx.yaml, and pass below checking. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 19:21:17 +0000