| Age | Commit message (Collapse) | Author |
|---|
|
wait_for_completion_interruptible_timeout()
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_interruptible_timeout() causing patterns like:
timeout = wait_for_completion_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240603091541.8367-5-wsa+renesas@sang-engineering.com
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240603091541.8367-4-wsa+renesas@sang-engineering.com
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_timeout() causing patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240603091541.8367-3-wsa+renesas@sang-engineering.com
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "cmd_buf" variable is a pointer to "struct at76_command" and
this structure ends in a flexible array:
struct at76_command {
[...]
u8 data[];
} __packed;
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + count" in the
kmalloc() function.
Also, declare a new variable (total_size) since the return value of the
struct_size() helper is used several times.
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions). In this case, it is important to note
that the attribute used is "__counted_by_le" since the counter type is
"__le16".
This way, the code is more readable and safer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/AS8PR02MB7237578654CEDDFE5F8C17BA8BFE2@AS8PR02MB7237.eurprd02.prod.outlook.com
|
|
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter). This patch has no effect
on runtime behavior.
At the same time remove some redundant NULL initializations.
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/AS8PR02MB7237C784C14DBC943CB719F88BFE2@AS8PR02MB7237.eurprd02.prod.outlook.com
|
|
This is the first step towards removing the P2P Device MAC.
Use ROC (which uses the AUX MAC) for P2P Device
discoveribility and action frames.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.8c90e457abbd.I8e340759ecb299e05b1809f3d8060429c6cbbd01@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If non-BSS and remain-on-channel (ROC) blocking were to occur
simultaneously, they'd step on each other's toes, unblocking
when not yet supported. Disentangle these bits, and ROC doesn't
need to use the non_bss_link() function then.
Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.461fcf7b95bb.Id0d21dcb739d426ff15ec068b5df8abaab58884d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop supporting all FWs older than the max API version.
These FW versions were supported since v6.5.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.ad6d43fe9893.I96f769e7d5be3e6499d260451df781bd694a5142@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When EMLSR gets unblocked, the current code checks if the last exit was
due to an EXIT reason (as opposed to a BLOCKING one), and if so, it
does nothing, as in this case a MLO scan was scheduled to run in 30
seconds.
But the code doesn't consider the time that passed from the last exit,
so if immediately after the exit a blocker occurred (e.g. non-BSS
interface), and lasts for more than 30 seconds, then the MLO scan and the
following link selection will decide not to enter EMLSR, and when the
unblocking event finally happens, the reason is still set to the EXIT one,
so it will do nothing, and we will not have the chance to re-enable EMLSR.
Fix this by checking also the time that has passed since the last exit,
only if it is less than 30 seconds, we can count on the scheduled MLO
scan.
Note that clearing the reason itself can't be done since it is needed
for the EMLSR prevention mechanism.
Fixes: 2f33561ea8f9 ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.58556fc4cfa9.I4c55b3cd9f20b21b37f28258d0fb6842ba413966@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This was needed when we had multiple types of transports. Now we only
have pcie, so there is no need for this ops.
Cleanup the code such as the different trans APIs will call the pcie
function directly, instead of calling the callback,
and remove struct iwl_trans_ops.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The TX queue code was mostly moved out to support an internal
transport that we were never going to publish, but we're no
longer using that. Since we're also going to be dissolving
the virtual transport layer entirely, integrate the TX queue
code into the PCIe layer.
This also has a small kernel of already removing the virtual
transport function layer, since iwl_trans_send_cmd() calls
iwl_trans_pcie_send_hcmd() directly now, even if that still
calls the transport send_cmd method for now, we'll clean it
up later.
Also, not everything is renamed yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.936b13f45071.Ib219ce01a1e67bcad79d5131626db950252aaa46@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This needs to include dbg-tlv.h since it uses the value of
IWL_FW_INI_ALLOCATION_NUM from that file.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.2d25691283eb.I0909621a0e293a8a21d4f1de6e5fd59c22e4b212@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This really isn't correct to be in the opmode, do the clamping
(and power-of-2 fixup that may be necessary due to this, or even
otherwise) in the queue code. Also move down the retrying of the
allocation, it should be after all the size fixups, but also it
just makes sense, and avoids retrying same-size allocations in
the case of the BZ-family A-step workaround.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.000a0a1e807d.Ib822590d5aca76ff3168418ae2c139b3d43d81ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When entering D3 we want to configure skip over DTIM, but
it can't use the deflink configuration, that will not even
exist. Adjust the code to handle multiple links by taking
the min skip, even if we should only have a single active
link at this point.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.bccf980fadb4.Idc98b9f3634f39d2fae9bd9916f5d050ccd48f95@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop supporting older FWs.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.ff8477233010.Ic8c73bd6749cc5f8ab5297807bb0be9bd96a59fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
These entries are not used, remove them.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.0c7c520814d5.I19cefb3d81b03a5be94c029cfffd1c8b8c437182@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a user uses iw to connect to a network and we don't have any
information about the existing networks, cfg80211 will trigger a scan
internally even if the user didn't ask for a scan. This scan is
implemented by cfg80211_conn_scan(). This function called rdev_scan()
directly without honoring the WIPHY_FLAG_SPLIT_SCAN_6GHZ flag.
Use cfg80211_scan instead, this will split the scan if the low level
driver asked to.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.33f03661476a.I7b5be20a55aafe012cd9ddb3b4ba2d46b256ace4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's no need to have the always-zero ret variable in
the function scope, move it into the inner scope only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.eb7a24632d98.I72d7fe1da89d4b89bcfd0f5fb9057e3e69355cfe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When e.g. wpa_supplicant sets only the MLD "sta" authorized
state, the code actually applies that change, but then returns
an error to userspace anyway because there were no changes to
the link station, and no link ID was given. However, it's not
incorrect to not have a link ID when wanting to change only
the MLD peer ("sta") state, so the code shouldn't require it.
To fix this, separate the "new_link" argument out into a new
three-state enum, because if modify is called on a link STA
only, it should return an error if no link is given or if it
doesn't exist. For modify on the MLD "sta", not having a link
ID is OK, but if there is one it should be validated.
This seems to not have mattered much as wpa_supplicant just
prints a message and continues, and the authorized state was
already set before this error return. However, in the later
code powersave recalculation etc. will be skipped, so that it
may result in never allowing powersave on MLO connections.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.48e2b8af07e3.Ib9793c383fcba118c05100e024f4a11a1c3d0e85@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Setting a channel with 320 MHz channel width over hwsim results in an
array-index-out-of-bounds error. Fix it by adding 320 MHz to hwsim
supported channel widths.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.a766c1465566.Ib859c7233511b61b8a34022cfceeb4971c739d80@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In NDP ranging, the number of NDP exchanges is not negotiated
and thus is not limited by the protocol. Remove the limit on
FTMs per burst for trigger based and non trigger based ranging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.916e228537d9.I5fe4c1cefa1c1328726e7615dd5a0d861c694381@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On 6 GHz (and also 5 GHz to some degree), only a specific set of center
frequencies should be used depending on the channel bandwidth. Verify
this is the case on 6 GHz. For 5 GHz, we are more accepting as there are
APs that got it wrong historically.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240602102200.876b10a2beda.I0d3d0daea4014e99654437ff6691378dbe452652@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a regulatory flag to allow VLP AP operation even on
channels otherwise marked NO_IR, which may be possible
in some regulatory domains/countries.
Note that this requires checking also when the beacon is
changed, since that may change the regulatory power type.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.63792ce19790.Ie2a02750d283b78fbf3c686b10565fb0388889e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are two functions exported now, with different settings,
refactor to just export a single function that take a struct
with different settings. This will make it easier to add more
parameters.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.d44c34dadfc2.I59b4403108e0dbf7fc6ae8f7522e1af520cffb1c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add cfg80211_get_6ghz_power_type() to parse the 6 GHz
power type from a given set of elements, which is now
only inside cfg80211_6ghz_power_type_valid().
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.84cdffd94085.I76f434ee12552e8be91273f3b2d776179eaa62f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
To later introduce an override for VLP APs being allowed despite
NO-IR flags, which is somewhat similar in construction to being
allowed to monitor on disabled channels, refactor the code that
checks channel flags to have not a 'monitor' argument but a set
of 'permitting' flags that permit the operation without checking
for 'prohibited' flags.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.3da28ded4a50.I90cffc633d0510293d511f60097dc75e719b55f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This really shouldn't have been in ieee80211.h, since it
doesn't directly represent the spec. Move it to cfg80211
rather than mac80211 since upcoming changes will use it
there.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.962b16c831cd.I5745962525b1b176c5b90d37b3720fc100eee406@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This has never been used, and it's really not directly
representing the spec, so shouldn't have been here in
the first place. Remove it.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.32ed8fc1522d.Id4480d162e1921478e33d145890dc16c263b57bf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use BIT(x) instead of 1<<x, in part because it's mostly
missing spaces anyway, in part because it reads nicer.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.c21598fbf49c.Ib8f26c5e9f508aee19fdfa1fd4b5995f084c46d4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It may be possible to monitor on disabled channels per the
can-monitor flag, but evidently I forgot to expose that out
to userspace. Fix that.
Fixes: a110a3b79177 ("wifi: cfg80211: optionally support monitor on disabled channels")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.9a2c19a51e53.I50fa1b1a18b70f63a5095131ac23dc2e71f3d426@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in
cfg80211_calculate_bitrate_he(), leading to below warning:
kernel: invalid HE MCS: bw:6, ru:6
kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211]
Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth.
Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://msgid.link/20240606020653.33205-3-quic_bqiang@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
rates_996 is mistakenly written as rates_969, fix it.
Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://msgid.link/20240606020653.33205-2-quic_bqiang@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
In this driver specifically, .ndo_get_stats64 basically points to
dev_fetch_sw_netstats(). Now it will point to dev_get_tstats64(), which
calls netdev_stats_to_stats64() and dev_fetch_sw_netstats().
netdev_stats_to_stats64() seems irrelevant for this driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240607102045.235071-2-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move mac80211 driver to leverage the core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240607102045.235071-1-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Jiazi Li reported that they occasionally see hash table duplicates
as evidenced by the WARN_ON() in rb_insert_bss() in this code. It
isn't clear how that happens, nor have I been able to reproduce it,
but if it does happen, the kernel crashes later, when it tries to
unhash the entry that's now not hashed.
Try to make this situation more survivable by removing the BSS from
the list(s) as well, that way it's fully leaked here (as had been
the intent in the hash insert error path), and no longer reachable
through the list(s) so it shouldn't be unhashed again later.
Link: https://lore.kernel.org/r/20231026013528.GA24122@Jiazi.Li
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240607181726.36835-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For the EHT EIRP transmit power envelope, the 320 MHz is in
the last octet, but if we've copied 4 octets (count == 3),
the next one is at index 4 not 5 (count + 2). Fix this, and
just hardcode the offset since count is always 3 here.
Fixes: 39dc8b8ea387 ("wifi: mac80211: pass parsed TPE data to drivers")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240612100533.f96c1e0fb758.I2f301c4341abb44dafd29128e7e32c66dc0e296d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2024-06-03
This series includes miscellaneous improvements for the ice as well as a
cleanup to the Makefiles for all Intel net drivers.
Andy fixes all of the Intel net driver Makefiles to use the documented
'*-y' syntax for specifying object files to link into kernel driver
modules, rather than the '*-objs' syntax which works but is documented as
reserved for user-space host programs.
Jacob has a cleanup to refactor rounding logic in the ice driver into a
common roundup_u64 helper function.
Michal Schmidt replaces irq_set_affinity_hint() to use
irq_update_affinity_hint() which behaves better with user-applied affinity
settings.
v2: https://lore.kernel.org/r/20240605-next-2024-06-03-intel-next-batch-v2-0-39c23963fa78@intel.com
v1: https://lore.kernel.org/r/20240603-next-2024-06-03-intel-next-batch-v1-0-e0523b28f325@intel.com
====================
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-0-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irq_set_affinity_hint() is deprecated. Use irq_update_affinity_hint()
instead. This removes the side-effect of actually applying the affinity.
The driver does not really need to worry about spreading its IRQs across
CPUs. The core code already takes care of that.
On the contrary, when the driver applies affinities by itself, it breaks
the users' expectations:
1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in
order to prevent IRQs from being moved to certain CPUs that run a
real-time workload.
2. ice reconfigures VSIs at runtime due to a MIB change
(ice_dcb_process_lldp_set_mib_change). Reopening a VSI resets the
affinity in ice_vsi_req_irq_msix().
3. ice has no idea about irqbalance's config, so it may move an IRQ to
a banned CPU. The real-time workload suffers unacceptable latency.
I am not sure if updating the affinity hints is at all useful, because
irqbalance ignores them since 2016 ([1]), but at least it's harmless.
This ice change is similar to i40e commit d34c54d1739c ("i40e: Use
irq_update_affinity_hint()").
[1] https://github.com/Irqbalance/irqbalance/commit/dcc411e7bfdd
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-3-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ice_ptp_cfg_clkout(), the ice driver needs to calculate the nearest next
second of a current time value specified in nanoseconds. It implements this
using div64_u64, because the time value is a u64. It could use div_u64
since NSEC_PER_SEC is smaller than 32-bits.
Ideally this would be implemented directly with roundup(), but that can't
work on all platforms due to a division which requires using the specific
macros and functions due to platform restrictions, and to ensure that the
most appropriate and fast instructions are used.
The kernel doesn't currently provide any 64-bit equivalents for doing
roundup. Attempting to use roundup() on a 32-bit platform will result in a
link failure due to not having a direct 64-bit division.
The closest equivalent for this is DIV64_U64_ROUND_UP, which does a
division always rounding up. However, this only computes the division, and
forces use of the div64_u64 in cases where the divisor is a 32bit value and
could make use of div_u64.
Introduce DIV_U64_ROUND_UP based on div_u64, and then use it to implement
roundup_u64 which takes a u64 input value and a u32 rounding value.
The name roundup_u64 matches the naming scheme of div_u64, and future
patches could implement roundup64_u64 if they need to round by a multiple
that is greater than 32-bits.
Replace the logic in ice_ptp.c which does this equivalent with the newly
added roundup_u64.
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-2-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcpci.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcmulti.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcsusb.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/avmfritz.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/speedfax.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNinfineon.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/w6692.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/netjet.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNipac.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNisar.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/mISDN_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/mISDN_dsp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/l1oip.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240607-md-drivers-isdn-v1-1-81fb7001bc3a@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-06-06
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 50 files changed, 1887 insertions(+), 527 deletions(-).
The main changes are:
1) Add a user space notification mechanism via epoll when a struct_ops
object is getting detached/unregistered, from Kui-Feng Lee.
2) Big batch of BPF selftest refactoring for sockmap and BPF congctl
tests, from Geliang Tang.
3) Add BTF field (type and string fields, right now) iterator support
to libbpf instead of using existing callback-based approaches,
from Andrii Nakryiko.
4) Extend BPF selftests for the latter with a new btf_field_iter
selftest, from Alan Maguire.
5) Add new kfuncs for a generic, open-coded bits iterator,
from Yafang Shao.
6) Fix BPF selftests' kallsyms_find() helper under kernels configured
with CONFIG_LTO_CLANG_THIN, from Yonghong Song.
7) Remove a bunch of unused structs in BPF selftests,
from David Alan Gilbert.
8) Convert test_sockmap section names into names understood by libbpf
so it can deduce program type and attach type, from Jakub Sitnicki.
9) Extend libbpf with the ability to configure log verbosity
via LIBBPF_LOG_LEVEL environment variable, from Mykyta Yatsenko.
10) Fix BPF selftests with regards to bpf_cookie and find_vma flakiness
in nested VMs, from Song Liu.
11) Extend riscv32/64 JITs to introduce shift/add helpers to generate Zba
optimization, from Xiao Wang.
12) Enable BPF programs to declare arrays and struct fields with kptr,
bpf_rb_root, and bpf_list_head, from Kui-Feng Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
selftests/bpf: Drop useless arguments of do_test in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_ca
selftests/bpf: Add start_test helper in bpf_tcp_ca
selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca
libbpf: Auto-attach struct_ops BPF maps in BPF skeleton
selftests/bpf: Add btf_field_iter selftests
selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT
libbpf: Remove callback-based type/string BTF field visitor helpers
bpftool: Use BTF field iterator in btfgen
libbpf: Make use of BTF field iterator in BTF handling code
libbpf: Make use of BTF field iterator in BPF linker code
libbpf: Add BTF field iterator
selftests/bpf: Ignore .llvm.<hash> suffix in kallsyms_find()
selftests/bpf: Fix bpf_cookie and find_vma in nested VM
selftests/bpf: Test global bpf_list_head arrays.
selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types.
selftests/bpf: Test kptr arrays and kptrs in nested struct fields.
bpf: limit the number of levels of a nested struct type.
bpf: look into the types of the fields of a struct type recursively.
...
====================
Link: https://lore.kernel.org/r/20240606223146.23020-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Marek Behún says:
====================
Fix changing DSA conduit
This series fixes an issue in the DSA code related to host interface UC
address installed into port FDB and port conduit address database when
live-changing port conduit.
The first patch refactores/deduplicates the installation/uninstallation
of the interface's MAC address and the second patch fixes the issue.
Cover letter for v1 and v2:
https://patchwork.kernel.org/project/netdevbpf/cover/20240429163627.16031-1-kabel@kernel.org/
https://patchwork.kernel.org/project/netdevbpf/cover/20240502122922.28139-1-kabel@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When changing DSA user interface conduit while the user interface is up,
DSA exhibits different behavior in comparison to when the interface is
down. This different behavior concerns the primary unicast MAC address
stored in the port standalone FDB and in the conduit device UC database.
If we put a switch port down while changing the conduit with
ip link set sw0p0 down
ip link set sw0p0 type dsa conduit conduit1
ip link set sw0p0 up
we delete the address in dsa_user_close() and install the (possibly
different) address in dsa_user_open().
But when changing the conduit on the fly, the old address is not
deleted and the new one is not installed.
Since we explicitly want to support live-changing the conduit, uninstall
the old address before calling dsa_port_assign_conduit() and install the
(possibly different) new address after the call.
Because conduit change might also trigger address change (the user
interface is supposed to inherit the conduit interface MAC address if no
address is defined in hardware (dp->mac is a zero address)), move the
eth_hw_addr_inherit() call from dsa_user_change_conduit() to
dsa_port_change_conduit(), just before installing the new address.
Although this is in theory a flaw in DSA core, it needs not be
backported, since there is currently no DSA driver that can be affected
by this. The only DSA driver that supports changing conduit is felix,
and, as explained by Vladimir Oltean [1]:
There are 2 reasons why with felix the bug does not manifest itself.
First is because both the 'ocelot' and the alternate 'ocelot-8021q'
tagging protocols have the 'promisc_on_conduit = true' flag. So the
unicast address doesn't have to be in the conduit's RX filter -
neither the old or the new conduit.
Second, dsa_user_host_uc_install() theoretically leaves behind host
FDB entries installed towards the wrong (old) CPU port. But in
felix_fdb_add(), we treat any FDB entry requested towards any CPU port
as if it was a multicast FDB entry programmed towards _all_ CPU ports.
For that reason, it is installed towards the port mask of the PGID_CPU
port group ID:
if (dsa_port_is_cpu(dp))
port = PGID_CPU;
Therefore no Fixes tag for this change.
[1] https://lore.kernel.org/netdev/20240507201827.47suw4fwcjrbungy@skbuf/
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sequence
if (dsa_switch_supports_uc_filtering(ds))
dsa_port_standalone_host_fdb_add(dp, addr, 0);
if (!ether_addr_equal(addr, conduit->dev_addr))
dev_uc_add(conduit, addr);
is executed both in dsa_user_open() and dsa_user_set_mac_addr().
Its reverse is executed both in dsa_user_close() and
dsa_user_set_mac_addr().
Refactor these sequences into new functions dsa_user_host_uc_install()
and dsa_user_host_uc_uninstall().
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
rtnetlink: move rtnl_lock handling out of af_netlink
With the changes done in commit 5b4b62a169e1 ("rtnetlink: make
the "split" NLM_DONE handling generic") we can also move the
rtnl locking out of af_netlink.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Back in 2007, in commit af65bdfce98d ("[NETLINK]: Switch cb_lock spinlock
to mutex and allow to override it") netlink core was extended to allow
subsystems to replace the dump mutex lock with its own lock.
The mechanism was used by rtnetlink to take rtnl_lock but it isn't
sufficiently flexible for other users. Over the 17 years since
it was added no other user appeared. Since rtnetlink needs conditional
locking now, and doesn't use it either, axe this feature complete.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have an intermediate layer of code for handling
rtnl-level netlink dump quirks, we can move the rtnl_lock
taking there.
For dump handlers with RTNL_FLAG_DUMP_SPLIT_NLM_DONE we can
avoid taking rtnl_lock just to generate NLM_DONE, once again.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kernel.h is included solely for some other existing headers.
Include them directly and get rid of kernel.h.
While at it, sort headers alphabetically for easier maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
