summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-21hwmon: fix potential sensor registration fail if of_node is missingPhinex Hung
It is not sufficient to check of_node in current device. In some cases, this would cause the sensor registration to fail. This patch looks for device's ancestors to find a valid of_node if any. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Signed-off-by: Phinex Hung <phinex@realtek.com> Link: https://lore.kernel.org/r/20230321060224.3819-1-phinex@realtek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-03-21hwmon: (peci/cputemp) Fix miscalculated DTS for SKXIwona Winiarska
For Skylake, DTS temperature of the CPU is reported in S10.6 format instead of S8.8. Reported-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/lkml/ZBhHS7v+98NK56is@home.paul.comp/ Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20230321090410.866766-1-iwona.winiarska@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-03-21efi/libstub: zboot: Add compressed image to make targetsArd Biesheuvel
Avoid needlessly rebuilding the compressed image by adding the file 'vmlinuz' to the 'targets' Kbuild make variable. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-03-21entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-upFrederic Weisbecker
RCU sometimes needs to perform a delayed wake up for specific kthreads handling offloaded callbacks (RCU_NOCB). These wakeups are performed by timers and upon entry to idle (also to guest and to user on nohz_full). However the delayed wake-up on kernel exit is actually performed after the thread flags are fetched towards the fast path check for work to do on exit to user. As a result, and if there is no other pending work to do upon that kernel exit, the current task will resume to userspace with TIF_RESCHED set and the pending wake up ignored. Fix this with fetching the thread flags _after_ the delayed RCU-nocb kthread wake-up. Fixes: 47b8ff194c1f ("entry: Explicitly flush pending rcuog wakeup before last rescheduling point") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230315194349.10798-3-joel@joelfernandes.org
2023-03-21perf/x86/amd/core: Always clear status for idxBreno Leitao
The variable 'status' (which contains the unhandled overflow bits) is not being properly masked in some cases, displaying the following warning: WARNING: CPU: 156 PID: 475601 at arch/x86/events/amd/core.c:972 amd_pmu_v2_handle_irq+0x216/0x270 This seems to be happening because the loop is being continued before the status bit being unset, in case x86_perf_event_set_period() returns 0. This is also causing an inconsistency because the "handled" counter is incremented, but the status bit is not cleaned. Move the bit cleaning together above, together when the "handled" counter is incremented. Fixes: 7685665c390d ("perf/x86/amd/core: Add PerfMonV2 overflow handling") Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Sandipan Das <sandipan.das@amd.com> Link: https://lore.kernel.org/r/20230321113338.1669660-1-leitao@debian.org
2023-03-21sched/fair: Sanitize vruntime of entity being migratedVincent Guittot
Commit 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed") fixes an overflowing bug, but ignore a case that se->exec_start is reset after a migration. For fixing this case, we delay the reset of se->exec_start after placing the entity which se->exec_start to detect long sleeping task. In order to take into account a possible divergence between the clock_task of 2 rqs, we increase the threshold to around 104 days. Fixes: 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed") Originally-by: Zhang Qiao <zhangqiao22@huawei.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Qiao <zhangqiao22@huawei.com> Link: https://lore.kernel.org/r/20230317160810.107988-1-vincent.guittot@linaro.org
2023-03-21entry: Fix noinstr warning in __enter_from_user_mode()Josh Poimboeuf
__enter_from_user_mode() is triggering noinstr warnings with CONFIG_DEBUG_PREEMPT due to its call of preempt_count_add() via ct_state(). The preemption disable isn't needed as interrupts are already disabled. And the context_tracking_enabled() check in ct_state() also isn't needed as that's already being done by the CT_WARN_ON(). Just use __ct_state() instead. Fixes the following warnings: vmlinux.o: warning: objtool: enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0xf9: call to preempt_count_add() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0xc7: call to preempt_count_add() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section Fixes: 171476775d32 ("context_tracking: Convert state to atomic_t") Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/d8955fa6d68dc955dda19baf13ae014ae27926f5.1677369694.git.jpoimboe@kernel.org
2023-03-21drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Book X90FHans de Goede
Like the Windows Lenovo Yoga Book X91F/L the Android Lenovo Yoga Book X90F/L has a portrait 1200x1920 screen used in landscape mode, add a quirk for this. When the quirk for the X91F/L was initially added it was written to also apply to the X90F/L but this does not work because the Android version of the Yoga Book uses completely different DMI strings. Also adjust the X91F/L quirk to reflect that it only applies to the X91F/L models. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230301095218.28457-1-hdegoede@redhat.com
2023-03-20octeontx2-vf: Add missing free for alloc_percpuJiasheng Jiang
Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid memory leak, same as the "pf->hw.lmt_info" in `drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`. Fixes: 5c0512072f65 ("octeontx2-pf: cn10k: Use runtime allocated LMTLINE region") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Acked-by: Geethasowjanya Akula <gakula@marvell.com> Link: https://lore.kernel.org/r/20230317064337.18198-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-20io_uring/net: avoid sending -ECONNABORTED on repeated connection requestsJens Axboe
Since io_uring does nonblocking connect requests, if we do two repeated ones without having a listener, the second will get -ECONNABORTED rather than the expected -ECONNREFUSED. Treat -ECONNABORTED like a normal retry condition if we're nonblocking, if we haven't already seen it. Cc: stable@vger.kernel.org Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT") Link: https://github.com/axboe/liburing/issues/828 Reported-by: Hui, Chunyang <sanqian.hcy@antgroup.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-20block/io_uring: pass in issue_flags for uring_cmd task_work handlingJens Axboe
io_uring_cmd_done() currently assumes that the uring_lock is held when invoked, and while it generally is, this is not guaranteed. Pass in the issue_flags associated with it, so that we have IO_URING_F_UNLOCKED available to be able to lock the CQ ring appropriately when completing events. Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-20selftests: sigaltstack: fix -WuninitializedNick Desaulniers
Building sigaltstack with clang via: $ ARCH=x86 make LLVM=1 -C tools/testing/selftests/sigaltstack/ produces the following warning: warning: variable 'sp' is uninitialized when used here [-Wuninitialized] if (sp < (unsigned long)sstack || ^~ Clang expects these to be declared at global scope; we've fixed this in the kernel proper by using the macro `current_stack_pointer`. This is defined in different headers for different target architectures, so just create a new header that defines the arch-specific register names for the stack pointer register, and define it for more targets (at least the ones that support current_stack_pointer/ARCH_HAS_CURRENT_STACK_POINTER). Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/lkml/CA+G9fYsi3OOu7yCsMutpzKDnBMAzJBCPimBp86LhGBa0eCnEpA@mail.gmail.com/ Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-03-20Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linuxLinus Torvalds
Pull fsverity fixes from Eric Biggers: "Fix two significant performance issues with fsverity" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: fsverity: don't drop pagecache at end of FS_IOC_ENABLE_VERITY fsverity: Remove WQ_UNBOUND from fsverity read workqueue
2023-03-20Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linuxLinus Torvalds
Pull fscrypt fix from Eric Biggers: "Fix a bug where when a filesystem was being unmounted, the fscrypt keyring was destroyed before inodes have been released by the Landlock LSM. This bug was found by syzbot" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: check for NULL keyring in fscrypt_put_master_key_activeref() fscrypt: improve fscrypt_destroy_keyring() documentation fscrypt: destroy keyring after security_sb_delete()
2023-03-21zonefs: Fix error message in zonefs_file_dio_append()Damien Le Moal
Since the expected write location in a sequential file is always at the end of the file (append write), when an invalid write append location is detected in zonefs_file_dio_append(), print the invalid written location instead of the expected write location. Fixes: a608da3bd730 ("zonefs: Detect append writes at invalid locations") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
2023-03-21zonefs: Prevent uninitialized symbol 'size' warningDamien Le Moal
In zonefs_file_dio_append(), initialize the variable size to 0 to prevent compilation and static code analizers warning such as: New smatch warnings: fs/zonefs/file.c:441 zonefs_file_dio_append() error: uninitialized symbol 'size'. The warning is a false positive as size is never actually used uninitialized. No functional change. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202303191227.GL8Dprbi-lkp@intel.com/ Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
2023-03-20gpu: host1x: fix uninitialized variable useArnd Bergmann
The error handling for platform_get_irq() failing no longer works after a recent change, clang now points this out with a warning: drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized] if (syncpt_irq < 0) ^~~~~~~~~~ Fix this by removing the variable and checking the correct error status. Fixes: 625d4ffb438c ("gpu: host1x: Rewrite syncpoint interrupt handling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-20ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TGHans de Goede
The Acer Aspire 3830TG predates Windows 8, so it defaults to using acpi_video# for backlight control, but this is non functional on this model. Add a DMI quirk to use the native backlight interface which does work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-20Merge tag 'nfs-for-6.3-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client fixes from Anna Schumaker: - Fix /proc/PID/io read_bytes accounting - Fix setting NLM file_lock start and end during decoding testargs - Fix timing for setting access cache timestamps * tag 'nfs-for-6.3-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Correct timing for assigning access cache timestamp lockd: set file_lock start and end when decoding nlm4 testargs NFS: Fix /proc/PID/io read_bytes for buffered reads
2023-03-20thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bitTom Rix
cppcheck reports drivers/thunderbolt/nhi.c:74:7: style: Local variable 'bit' shadows outer variable [shadowVariable] int bit; ^ drivers/thunderbolt/nhi.c:66:6: note: Shadowed declaration int bit = ring_interrupt_index(ring) & 31; ^ drivers/thunderbolt/nhi.c:74:7: note: Shadow variable int bit; ^ For readablity rename the outer to interrupt_bit and the innner to auto_clear_bit. Fixes: 468c49f44759 ("thunderbolt: Disable interrupt auto clear for ring") Cc: stable@vger.kernel.org Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-03-20platform/x86 (gigabyte-wmi): Add support for A320M-S2H V2Frank Crawford
Add support for A320M-S2H V2. Tested using module force_load option. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Acked-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230318091441.1240921-1-frank@crawford.emu.id.au Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-03-20platform/x86/intel: tpmi: Revise the comment of intel_vsec_add_auxDongliang Mu
intel_vsec_add_aux() is resource managed including res and feature_vsec_dev memory. Fix this by revising the comment of intel_vsec_add_aux since res variable will also be freed in the intel_vsec_add_aux. Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230309040107.534716-3-dzm91@hust.edu.cn Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-03-20platform/x86/intel: tpmi: Fix double free in tpmi_create_device()Dongliang Mu
The previous commit 6a192c0cbf38 ("platform/x86/intel/tpmi: Fix double free reported by Smatch") incorrectly handle the deallocation of res variable. As shown in the comment, intel_vsec_add_aux handles all the deallocation of res and feature_vsec_dev. Therefore, kfree(res) can still cause double free if intel_vsec_add_aux returns error. Fix this by adjusting the error handling part in tpmi_create_device, following the function intel_vsec_add_dev. Fixes: 6a192c0cbf38 ("platform/x86/intel/tpmi: Fix double free reported by Smatch") Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230309040107.534716-2-dzm91@hust.edu.cn Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-03-20platform/x86/intel: vsec: Fix a memory leak in intel_vsec_add_auxDongliang Mu
The first error handling code in intel_vsec_add_aux misses the deallocation of intel_vsec_dev->resource. Fix this by adding kfree(intel_vsec_dev->resource) in the error handling code. Reviewed-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230309040107.534716-4-dzm91@hust.edu.cn Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-03-20Revert "drm/i915/hwmon: Enable PL1 power limit"Ashutosh Dixit
This reverts commit ee892ea83d99610fa33bea612de058e0955eec3a. It was accidentally picked up for backporting. Revert. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230319140300.2892032-1-ashutosh.dixit@intel.com
2023-03-20Merge branch 'ps3_gelic_net-fixes'David S. Miller
Geoff Levand says: ==================== net/ps3_gelic_net: DMA related fixes v9: Make rx_skb_size local to gelic_descr_prepare_rx. v8: Add more cpu_to_be32 calls. v7: Remove all cleanups, sync to spider net. v6: Reworked and cleaned up patches. v5: Some additional patch cleanups. v4: More patch cleanups. v3: Cleaned up patches as requested. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20net/ps3_gelic_net: Use dma_mapping_errorGeoff Levand
The current Gelic Etherenet driver was checking the return value of its dma_map_single call, and not using the dma_mapping_error() routine. Fixes runtime problems like these: DMA-API: ps3_gelic_driver sb_05: device driver failed to check map error WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:1027 .check_unmap+0x888/0x8dc Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20net/ps3_gelic_net: Fix RX sk_buff lengthGeoff Levand
The Gelic Ethernet device needs to have the RX sk_buffs aligned to GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must be a multiple of GELIC_NET_RXBUF_ALIGN. The current Gelic Ethernet driver was not allocating sk_buffs large enough to allow for this alignment. Also, correct the maximum and minimum MTU sizes, and add a new preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME. Fixes various randomly occurring runtime network errors. Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20usb: plusb: remove unused pl_clear_QuickLink_features functionTom Rix
clang with W=1 reports drivers/net/usb/plusb.c:65:1: error: unused function 'pl_clear_QuickLink_features' [-Werror,-Wunused-function] pl_clear_QuickLink_features(struct usbnet *dev, int val) ^ This static function is not used, so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20net: usb: lan78xx: Limit packet length to skb->lenSzymon Heidrich
Packet length retrieved from descriptor may be larger than the actual socket buffer length. In such case the cloned skb passed up the network stack will leak kernel memory contents. Additionally prevent integer underflow when size is less than ETH_FCS_LEN. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20net: qcom/emac: Fix use after free bug in emac_remove due to race conditionZheng Wang
In emac_probe, &adpt->work_thread is bound with emac_work_thread. Then it will be started by timeout handler emac_tx_timeout or a IRQ handler emac_isr. If we remove the driver which will call emac_remove to make cleanup, there may be a unfinished work. The possible sequence is as follows: Fix it by finishing the work before cleanup in the emac_remove and disable timeout response. CPU0 CPU1 |emac_work_thread emac_remove | free_netdev | kfree(netdev); | |emac_reinit_locked |emac_mac_down |//use netdev Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20net: dsa: report rx_bytes unadjusted for ETH_HLENVladimir Oltean
We collect the software statistics counters for RX bytes (reported to /proc/net/dev and to ethtool -S $dev | grep 'rx_bytes: ") at a time when skb->len has already been adjusted by the eth_type_trans() -> skb_pull_inline(skb, ETH_HLEN) call to exclude the L2 header. This means that when connecting 2 DSA interfaces back to back and sending 1 packet with length 100, the sending interface will report tx_bytes as incrementing by 100, and the receiving interface will report rx_bytes as incrementing by 86. Since accounting for that in scripts is quirky and is something that would be DSA-specific behavior (requiring users to know that they are running on a DSA interface in the first place), the proposal is that we treat it as a bug and fix it. This design bug has always existed in DSA, according to my analysis: commit 91da11f870f0 ("net: Distributed Switch Architecture protocol support") also updates skb->dev->stats.rx_bytes += skb->len after the eth_type_trans() call. Technically, prior to Florian's commit a86d8becc3f0 ("net: dsa: Factor bottom tag receive functions"), each and every vendor-specific tagging protocol driver open-coded the same bug, until the buggy code was consolidated into something resembling what can be seen now. So each and every driver should have its own Fixes: tag, because of their different histories until the convergence point. I'm not going to do that, for the sake of simplicity, but just blame the oldest appearance of buggy code. There are 2 ways to fix the problem. One is the obvious way, and the other is how I ended up doing it. Obvious would have been to move dev_sw_netstats_rx_add() one line above eth_type_trans(), and below skb_push(skb, ETH_HLEN). But DSA processing is not as simple as that. We count the bytes after removing everything DSA-related from the packet, to emulate what the packet's length was, on the wire, when the user port received it. When eth_type_trans() executes, dsa_untag_bridge_pvid() has not run yet, so in case the switch driver requests this behavior - commit 412a1526d067 ("net: dsa: untag the bridge pvid from rx skbs") has the details - the obvious variant of the fix wouldn't have worked, because the positioning there would have also counted the not-yet-stripped VLAN header length, something which is absent from the packet as seen on the wire (there it may be untagged, whereas software will see it as PVID-tagged). Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20drm/i915: Update vblank timestamping stuff on seamless M/N changeVille Syrjälä
When we change the M/N values seamlessly during a fastset we should also update the vblank timestamping stuff to make sure the vblank timestamp corrections/guesstimations come out exact. Note that only crtc_clock and framedur_ns can actually end up changing here during fastsets. Everything else we touch can only change during full modesets. Technically we should try to do this exactly at the start of vblank, but that would require some kind of double buffering scheme. Let's skip that for now and just update things right after the commit has been submitted to the hardware. This means the information will be properly up to date when the vblank irq handler goes to work. Only if someone ends up querying some vblanky stuff in between the commit and start of vblank may we see a slight discrepancy. Also this same problem really exists for the DRRS downclocking stuff. But as that is supposed to be more or less transparent to the user, and it only drops to low gear after a long delay (1 sec currently) we probably don't have to worry about it. Any time something is actively submitting updates DRRS will remain in high gear and so the timestamping constants will match the hardware state. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Fixes: e6f29923c048 ("drm/i915: Allow M/N change during fastset on bdw+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-1-ville.syrjala@linux.intel.com (cherry picked from commit 8cb1f95cca68421b08333175719fdd3615372ca8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20drm/i915: Fix format for perf_limit_reasonsVinay Belgaumkar
Use hex format so that it is easier to decode. Fixes: fe5979665f64 ("drm/i915/debugfs: Add perf_limit_reasons in debugfs") Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230315022906.2467408-1-vinay.belgaumkar@intel.com (cherry picked from commit 5e008ba67cb80084e99b40ccd46f9029ae421632) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20drm/i915/gt: perform uc late init after probe error injectionAndrzej Hajda
Probe pseudo errors should be injected only in places where real errors can be encountered, otherwise unwinding code can be broken. Placing intel_uc_init_late before i915_inject_probe_error violated this rule, resulting in following bug: __intel_gt_disable:655 GEM_BUG_ON(intel_gt_pm_is_awake(gt)) Fixes: 481d458caede ("drm/i915/guc: Add golden context to GuC ADS") Acked-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314151920.1065847-1-andrzej.hajda@intel.com (cherry picked from commit c4252a11131c7f27a158294241466e2a4e7ff94e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20drm/i915/active: Fix missing debug object activationNirmoy Das
debug_active_activate() expected ref->count to be zero which is not true anymore as __i915_active_activate() calls debug_active_activate() after incrementing the count. v2: No need to check for "ref->count == 1" as __i915_active_activate() already make sure of that(Janusz). References: https://gitlab.freedesktop.org/drm/intel/-/issues/6733 Fixes: 04240e30ed06 ("drm/i915: Skip taking acquire mutex for no ref->active callback") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313114613.9874-1-nirmoy.das@intel.com (cherry picked from commit bfad380c542438a9b642f8190b7fd37bc77e2723) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20drm/i915/guc: Fix missing ecodesJohn Harrison
Error captures are tagged with an 'ecode'. This is a pseduo-unique magic number that is meant to distinguish similar seeming bugs with different underlying signatures. It is a combination of two ring state registers. Unfortunately, the register state being used is only valid in execlist mode. In GuC mode, the register state exists in a separate list of arbitrary register address/value pairs rather than the named entry structure. So, search through that list to find the two exciting registers and copy them over to the structure's named members. v2: if else if instead of if if (Alan) Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Fixes: a6f0f9cf330a ("drm/i915/guc: Plumb GuC-capture into gpu_coredump") Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Cc: Michael Cheng <michael.cheng@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Bruce Chang <yu.bruce.chang@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230311063714.570389-2-John.C.Harrison@Intel.com (cherry picked from commit 9724ecdbb9ddd6da3260e4a442574b90fc75188a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20drm/i915/mtl: Disable MC6 for MTL A stepBadal Nilawar
The Wa_14017073508 require to send Media Busy/Idle mailbox while accessing Media tile. As of now it is getting handled while __gt_unpark, __gt_park. But there are various corner cases where forcewakes are taken without __gt_unpark i.e. without sending Busy Mailbox especially during register reads. Forcewakes are taken without busy mailbox leads to GPU HANG. So bringing mailbox calls under forcewake calls are no feasible option as forcewake calls are atomic and mailbox calls are blocking. The issue already fixed in B step so disabling MC6 on A step and reverting previous commit which handles Wa_14017073508 Fixes: 8f70f1ec587d ("drm/i915/mtl: Add Wa_14017073508 for SAMedia") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230310061339.2495416-2-badal.nilawar@intel.com (cherry picked from commit 038a24835ab68f341eaa7a0e3bcc6ce0f9b22e17) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20drm/i915: Preserve crtc_state->inherited during state clearingVille Syrjälä
intel_crtc_prepare_cleared_state() is unintentionally losing the "inherited" flag. This will happen if intel_initial_commit() is forced to go through the full modeset calculations for whatever reason. Afterwards the first real commit from userspace will not get forced to the full modeset path, and thus eg. audio state may not get recomputed properly. So if the monitor was already enabled during boot audio will not work until userspace itself does an explicit full modeset. Cc: stable@vger.kernel.org Tested-by: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> (cherry picked from commit 2553bacaf953b48c59357f5a622282bc0c45adae) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20drm/i915/fbdev: lock the fbdev obj before vma pinTejas Upadhyay
lock the fbdev obj before calling into i915_vma_pin_iomap(). This helps to solve below : <7>[ 93.563308] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <4>[ 93.581844] ------------[ cut here ]------------ <4>[ 93.581855] WARNING: CPU: 12 PID: 625 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:424 i915_gem_object_pin_map+0x152/0x1c0 [i915] Fixes: f0b6b01b3efe ("drm/i915: Add ww context to intel_dpt_pin, v2.") Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-5-radhakrishna.sripada@intel.com (cherry picked from commit 561b31acfd65502a2cda2067513240fc57ccdbdc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20drm/i915/mtl: Fix Wa_16015201720 implementationRadhakrishna Sripada
The commit 2357f2b271ad ("drm/i915/mtl: Initial display workarounds") extended the workaround Wa_16015201720 to MTL. However the registers that the original WA implemented moved for MTL. Implement the workaround with the correct register. v3: Skip clock gating for pipe C, D DMC's and fix the title Fixes: 2357f2b271ad ("drm/i915/mtl: Initial display workarounds") Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-2-radhakrishna.sripada@intel.com (cherry picked from commit 0188be507b973e36f637ba010a369057c8cb7282) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20thunderbolt: Disable interrupt auto clear for ringsMario Limonciello
When interrupt auto clear is programmed, any read to the interrupt status register will clear all interrupts. If two interrupts have come in before one can be serviced then this will cause lost interrupts. On AMD USB4 routers this has manifested in odd problems particularly with long strings of control tranfers such as reading the DROM via bit banging. Instead of clearing interrupts automatically, clear the bit corresponding to the given ring's interrupt in the ISR. Fixes: 7a1808f82a37 ("thunderbolt: Handle ring interrupt by reading interrupt status register") Cc: Sanju Mehta <Sanju.Mehta@amd.com> Cc: stable@vger.kernel.org Tested-by: Anson Tsao <anson.tsao@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-03-20thunderbolt: Use const qualifier for `ring_interrupt_index`Mario Limonciello
`ring_interrupt_index` doesn't change the data for `ring` so mark it as const. This is needed by the following patch that disables interrupt auto clear for rings. Cc: Sanju Mehta <Sanju.Mehta@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-03-19Linux 6.3-rc3v6.3-rc3Linus Torvalds
2023-03-19Merge tag 'trace-v6.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix setting affinity of hwlat threads in containers Using sched_set_affinity() has unwanted side effects when being called within a container. Use set_cpus_allowed_ptr() instead - Fix per cpu thread management of the hwlat tracer: - Do not start per_cpu threads if one is already running for the CPU - When starting per_cpu threads, do not clear the kthread variable as it may already be set to running per cpu threads - Fix return value for test_gen_kprobe_cmd() On error the return value was overwritten by being set to the result of the call from kprobe_event_delete(), which would likely succeed, and thus have the function return success - Fix splice() reads from the trace file that was broken by commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") - Remove obsolete and confusing comment in ring_buffer.c The original design of the ring buffer used struct page flags for tricks to optimize, which was shortly removed due to them being tricks. But a comment for those tricks remained - Set local functions and variables to static * tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr ring-buffer: remove obsolete comment for free_buffer_page() tracing: Make splice_read available again ftrace: Set direct_ops storage-class-specifier to static trace/hwlat: Do not start per-cpu thread if it is already running trace/hwlat: Do not wipe the contents of per-cpu thread data tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static tracing: Fix wrong return in kprobe_event_gen_test.c
2023-03-19tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptrCosta Shulyupin
There is a problem with the behavior of hwlat in a container, resulting in incorrect output. A warning message is generated: "cpumask changed while in round-robin mode, switching to mode none", and the tracing_cpumask is ignored. This issue arises because the kernel thread, hwlatd, is not a part of the container, and the function sched_setaffinity is unable to locate it using its PID. Additionally, the task_struct of hwlatd is already known. Ultimately, the function set_cpus_allowed_ptr achieves the same outcome as sched_setaffinity, but employs task_struct instead of PID. Test case: # cd /sys/kernel/tracing # echo 0 > tracing_on # echo round-robin > hwlat_detector/mode # echo hwlat > current_tracer # unshare --fork --pid bash -c 'echo 1 > tracing_on' # dmesg -c Actual behavior: [573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 0330f7aa8ee63 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by: Costa Shulyupin <costa.shul@redhat.com> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-03-19ring-buffer: remove obsolete comment for free_buffer_page()Vlastimil Babka
The comment refers to mm/slob.c which is being removed. It comes from commit ed56829cb319 ("ring_buffer: reset buffer page when freeing") and according to Steven the borrowed code was a page mapcount and mapping reset, which was later removed by commit e4c2ce82ca27 ("ring_buffer: allocate buffer page pointer"). Thus the comment is not accurate anyway, remove it. Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Reported-by: Mike Rapoport <mike.rapoport@gmail.com> Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Fixes: e4c2ce82ca27 ("ring_buffer: allocate buffer page pointer") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-03-19tracing: Make splice_read available againSung-hun Kim
Since the commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") is applied to the kernel, splice() and sendfile() calls on the trace file (/sys/kernel/debug/tracing /trace) return EINVAL. This patch restores these system calls by initializing splice_read in file_operations of the trace file. This patch only enables such functionalities for the read case. Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com Cc: stable@vger.kernel.org Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-03-19Merge tag 'tty-6.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve some reported issues. They include: - 8250 driver Kconfig issue pointed out by you that showed up in -rc1 - qcom-geni serial driver fixes - various 8250 driver fixes for reported problems - fsl_lpuart driver fixes - serdev fix for regression in -rc1 - vt.c bugfix All have been in linux-next for over a week with no reported problems" * tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: vt: protect KD_FONT_OP_GET_TALL from unbound access serial: qcom-geni: drop bogus uart_write_wakeup() serial: qcom-geni: fix mapping of empty DMA buffer serial: qcom-geni: fix DMA mapping leak on shutdown serial: qcom-geni: fix console shutdown hang serdev: Set fwnode for serdev devices tty: serial: fsl_lpuart: fix race on RX DMA shutdown serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default serial: 8250_fsl: fix handle_irq locking serial: 8250_em: Fix UART port type serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
2023-03-19Merge tag 'char-misc-6.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc/other driver subsystem patches to resolve reported problems for 6.3-rc3. Included in here are: - Interconnect driver fixes for reported problems - Memory driver fixes for reported problems - nvmem core fix - firmware driver fix for reported problem All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits) memory: tegra30-emc: fix interconnect registration race memory: tegra20-emc: fix interconnect registration race memory: tegra124-emc: fix interconnect registration race memory: tegra: fix interconnect registration race interconnect: exynos: drop redundant link destroy interconnect: exynos: fix registration race interconnect: exynos: fix node leak in probe PM QoS error path interconnect: qcom: msm8974: fix registration race interconnect: qcom: rpmh: fix registration race interconnect: qcom: rpmh: fix probe child-node error handling interconnect: qcom: rpm: fix registration race nvmem: core: return -ENOENT if nvmem cell is not found firmware: xilinx: don't make a sleepable memory allocation from an atomic context interconnect: qcom: rpm: fix probe child-node error handling interconnect: qcom: osm-l3: fix registration race interconnect: imx: fix registration race interconnect: fix provider registration API interconnect: fix icc_provider_del() error handling interconnect: fix mem leak when freeing nodes interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:25:25 +0000