summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-07drm/vc4: vec: Convert to atomic helpersMaxime Ripard
The VC4 VEC driver still uses legacy enable and disable hook implementation. Let's convert to the atomic variants. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-25-459522d653a7@cerno.tech
2022-09-07drm/vc4: vec: Remove empty mode_fixupMaxime Ripard
The mode_fixup hooks are deprecated, and the behaviour we implement is the default one anyway. Let's remove it. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-24-459522d653a7@cerno.tech
2022-09-07drm/ttm: Remove unnecessary '0' values from retLi zeming
The variable ret is assigned in the judgment branch statement, he does not need to initialize the assignment. Signed-off-by: Li zeming <zeming@nfschina.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907032934.4490-1-zeming@nfschina.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2022-09-07drm/via: Add new condition to via_dma_cleanup()Alisa Khabibrakhmanova
Pointer dev_priv->mmio, which was checked for NULL at via_do_init_map(), is passed to via_do_cleanup_map() and is dereferenced there without check. The patch adds the condition in via_dma_cleanup() which prevents potential NULL pointer dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 22f579c621e2 ("drm: Add via unichrome support") Signed-off-by: Alisa Khabibrakhmanova <khabibrakhmanova@ispras.ru> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220729090643.240778-1-khabibrakhmanova@ispras.ru
2022-09-06drm/panel-edp: Fix typo in kerneldoc comment (appers=>appears)Douglas Anderson
Ever since I got the spell-check working in my editor this one has been bugging me. Fix it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720162314.1.Ieef5bc3848df40b71605b70bb571d6429e8978de@changeid
2022-09-06drm/i915: Don't try to disable host RPS when this was never enabled.Rodrigo Vivi
Specially in GT reset case this could be triggered and try to disable things that had never been enabled. Let's add some protection here. Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220902095126.373036-1-rodrigo.vivi@intel.com
2022-09-06drm/scheduler: quieten kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in gpu_scheduler.h and sched_main.c. Quashes these warnings: include/drm/gpu_scheduler.h:332: warning: missing initial short description on line: * struct drm_sched_backend_ops include/drm/gpu_scheduler.h:412: warning: missing initial short description on line: * struct drm_gpu_scheduler include/drm/gpu_scheduler.h:461: warning: Function parameter or member 'dev' not described in 'drm_gpu_scheduler' drivers/gpu/drm/scheduler/sched_main.c:201: warning: missing initial short description on line: * drm_sched_dependency_optimized drivers/gpu/drm/scheduler/sched_main.c:995: warning: Function parameter or member 'dev' not described in 'drm_sched_init' Fixes: 2d33948e4e00 ("drm/scheduler: add documentation") Fixes: 8ab62eda177b ("drm/sched: Add device pointer to drm_gpu_scheduler") Fixes: 542cff7893a3 ("drm/sched: Avoid lockdep spalt on killing a processes") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Nayan Deshmukh <nayan26deshmukh@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Jiawei Gu <Jiawei.Gu@amd.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220404213040.12912-1-rdunlap@infradead.org
2022-09-06drm/bridge: anx7625: Set HPD irq detect window to 2msXin Ji
Some panels trigger HPD irq due to noise, the HPD debounce may be 1.8ms, exceeding the default irq detect window, ~1.4ms. This patch set HPD irq detection window to 2ms to tolerate the HPD noise. Signed-off-by: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220903130833.541463-1-xji@analogixsemi.com
2022-09-06Merge tag 'drm-misc-next-2022-08-20-1' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.1: UAPI Changes: Cross-subsystem Changes: - DMA-buf: documentation updates. - Assorted small fixes to vga16fb - Fix fbdev drivers to use the aperture helpers. - Make removal of conflicting drivers work correctly without fbdev enabled. Core Changes: - bridge, scheduler, dp-mst: Assorted small fixes. - Add more format helpers to fourcc, and use it to replace the cpp usage. - Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx ("darkness", inverted single channel) - Add packed AYUV8888 and XYUV8888 formats. - Assorted documentation updates. - Rename ttm_bo_init to ttm_bo_init_validate. - Allow TTM bo's to exist without backing store. - Convert drm selftests to kunit. - Add managed init functions for (panel) bridge, crtc, encoder and connector. - Fix endianness handling in various format conversion helpers. - Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565 - Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so drm_plane_helper is no longer needed in most drivers. - Use idr_init_base instead of idr_init. - Rename FB and GEM CMA helpers to DMA helpers. - Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that takes a iosys_map. Make drm_fb_memcpy take an iosys_map too. - Move edid luminance calculation to core, and use it in i915. Driver Changes: - bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767}, nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111: Assorted small fixes and doc updates. - vc4: Rework hdmi power up, and depend on PM. - panel/simple: Add Samsung LTL101AL01. - ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property is unchanged, and use the new PM ops. - Revert some amdgpu commits that cause garbaged graphics when starting X, and reapply them with the real problem fixed. - Completely rework vc4 init to use managed helpers. - Rename via_drv to via_dri1, and move all stuff there only used by the dri1 implementation in preperation for atomic modeset. - Use regmap bulk write in ssd130x. - Power sequence and clock updates to it6505. - Split panel-sitrox-st7701 init sequence and rework mode programming code. - virtio: Improve error and edge conditions handling, and convert to use managed helpers. - Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels. - Add generic fbdev support to komeda. - Split mgag200 modeset handling to make it more model-specific. - Convert simpledrm to use atomic helpers. - Improve udl suspend/disconnect handling. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
2022-09-06drm/i915: consider HAS_FLAT_CCS() in needs_ccs_pagesMatthew Auld
Just move the HAS_FLAT_CCS() check into needs_ccs_pages. This also then fixes i915_ttm_memcpy_allowed() which was incorrectly reporting true on DG1, even though it doesn't have small-BAR or flat-CCS. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6605 Fixes: efeb3caf4341 ("drm/i915/ttm: disallow CPU fallback mode for ccs pages") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905105329.41455-1-matthew.auld@intel.com
2022-09-05drm: vkms: Add support to the RGB565 formatIgor Torrente
This commit also adds new helper macros to deal with fixed-point arithmetic. It was done to improve the precision of the conversion to ARGB16161616 since the "conversion ratio" is not an integer. V3: Adapt the handlers to the new format introduced in patch 7 V3. V5: Minor improvements V6: Minor improvements (Pekka Paalanen) Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-10-igormtorrente@gmail.com
2022-09-05drm: vkms: Adds XRGB_16161616 and ARGB_1616161616 formatsIgor Torrente
This will be useful to write tests that depends on these formats. ARGB and XRGB follows the a similar implementation of the former formats. Just adjusting for 16 bits per channel. V3: Adapt the handlers to the new format introduced in patch 7 V3. V5: Minor improvements Added le16_to_cpu/cpu_to_le16 to the 16 bits color read/writes. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-9-igormtorrente@gmail.com
2022-09-05drm: vkms: Supports to the case where primary plane doesn't match the CRTCIgor Torrente
We will remove the current assumption that the primary plane has the same size and position as CRTC and that the primary plane is the bottom-most in zpos order, or is even enabled. At least as far as the blending machinery is concerned. For that we will add CRTC dimension information to `vkms_crtc_state` and add a opaque black backgound color. Because now we need to fill the background, we had a loss in performance with this change. Results running the IGT[1] test `igt@kms_cursor_crc@pipe-a-cursor-512x512-onscreen` ten times: | Frametime | |:--------------------------------------------:| | Implementation | Previous | This commit | |:---------------:|:---------:|:--------------:| | frametime range | 5~18 ms | 10~22 ms | | Average | 8.47 ms | 12.32 ms | [1] IGT commit id: bc3f6833a12221a46659535dac06ebb312490eb4 V6: Improve the commit description (Pekka Paalanen). Update some comments (Pekka Paalanen). Remove some fields from `vkms_crtc_state` and move where some variables are set (Pekka Paalanen). Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-8-igormtorrente@gmail.com
2022-09-05drm: vkms: Refactor the plane composer to accept new formatsIgor Torrente
Currently the blend function only accepts XRGB_8888 and ARGB_8888 as a color input. This patch refactors all the functions related to the plane composition to overcome this limitation. The pixels blend is done using the new internal format. And new handlers are being added to convert a specific format to/from this internal format. So the blend operation depends on these handlers to convert to this common format. The blended result, if necessary, is converted to the writeback buffer format. This patch introduces three major differences to the blend function. 1 - All the planes are blended at once. 2 - The blend calculus is done as per line instead of per pixel. 3 - It is responsible to calculates the CRC and writing the writeback buffer(if necessary). These changes allow us to allocate way less memory in the intermediate buffer to compute these operations. Because now we don't need to have the entire intermediate image lines at once, just one line is enough. | Memory consumption (output dimensions) | |:--------------------------------------:| | Current | This patch | |:------------------:|:-----------------:| | Width * Heigth | 2 * Width | Beyond memory, we also have a minor performance benefit from all these changes. Results running the IGT[1] test `igt@kms_cursor_crc@pipe-a-cursor-512x512-onscreen` ten times: | Frametime | |:------------------------------------------:| | Implementation | Current | This commit | |:---------------:|:---------:|:------------:| | frametime range | 9~22 ms | 5~17 ms | | Average | 11.4 ms | 7.8 ms | [1] IGT commit id: bc3f6833a12221a46659535dac06ebb312490eb4 V2: Improves the performance drastically, by performing the operations per-line and not per-pixel(Pekka Paalanen). Minor improvements(Pekka Paalanen). V3: Changes the code to blend the planes all at once. This improves performance, memory consumption, and removes much of the weirdness of the V2(Pekka Paalanen and me). Minor improvements(Pekka Paalanen and me). V4: Rebase the code and adapt it to the new NUM_OVERLAY_PLANES constant. V5: Minor checkpatch fixes and the removal of TO-DO item(Melissa Wen). Several security/robustness improvents(Pekka Paalanen). Removes check_planes_x_bounds function and allows partial partly off-screen(Pekka Paalanen). V6: Fix a mismatch of some variable sizes (Pekka Paalanen). Several minor improvements (Pekka Paalanen). Reviewed-by: Melissa Wen <mwen@igalia.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-7-igormtorrente@gmail.com
2022-09-05drm: vkms: Add fb information to `vkms_writeback_job`Igor Torrente
This commit is the groundwork to introduce new formats to the planes and writeback buffer. As part of it, a new buffer metadata field is added to `vkms_writeback_job`, this metadata is represented by the `vkms_frame_info` struct. Also adds two new function pointers (`line_to_frame_func` and `frame_to_line_func`) are defined to handle format conversion from/to internal format. A new internal format(`struct pixel_argb_u16`) is introduced to deal with all possible inputs. It consists of 16 bits fields that represent each of the channels. These things will allow us, in the future, to have different compositing and wb format types. V2: Change the code to get the drm_framebuffer reference and not copy its contents (Thomas Zimmermann). V3: Drop the refcount in the wb code (Thomas Zimmermann). V5: Add {wb,plane}_format_transform_func to vkms_writeback_job and vkms_plane_state (Pekka Paalanen) V6: Improvements to some struct/struct members names (Pekka Paalanen). Splits this patch in two (Pekka Paalanen). V7: Replace line_to_frame_func and frame_to_line_func typedefs with the function signature and void* (Melissa Wen). Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-6-igormtorrente@gmail.com
2022-09-05drm: vkms: get the reference to `drm_framebuffer` instead if coping itIgor Torrente
Instead of coping `drm_framebuffer` - which can cause problems - we just get the reference and add the ref count. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-5-igormtorrente@gmail.com
2022-09-05drm: drm_atomic_helper: Add a new helper to deal with the writeback ↵Igor Torrente
connector validation Add a helper function to validate the connector configuration received in the encoder atomic_check by the drivers. So the drivers don't need to do these common validations themselves. V2: Move the format verification to a new helper at the drm_atomic_helper.c (Thomas Zimmermann). V3: Format check improvements (Leandro Ribeiro). Minor improvements(Thomas Zimmermann). V5: Fix some grammar issues in the commit message (André Almeida). Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-4-igormtorrente@gmail.com
2022-09-05drm: vkms: Rename `vkms_composer` to `vkms_frame_info`Igor Torrente
Changes the name of this struct to a more meaningful name. A name that represents better what this struct is about. Composer is the code that do the compositing of the planes. This struct contains information on the frame used in the output composition. Thus, vkms_frame_info is a better name to represent this. V5: Fix a commit message typo(Melissa Wen). V6: Fix wrong iosys_map_is_null verification at compose_plane (Melissa Wen). Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-3-igormtorrente@gmail.com
2022-09-05drm: vkms: Replace hardcoded value of `vkms_composer.map` to ↵Igor Torrente
DRM_FORMAT_MAX_PLANES The `map` vector at `vkms_composer` uses a hardcoded value to define its size. If someday the maximum number of planes increases, this hardcoded value can be a problem. This value is being replaced with the DRM_FORMAT_MAX_PLANES macro. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Igor Torrente <igormtorrente@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-2-igormtorrente@gmail.com
2022-09-05drm/atomic-helper: log EINVAL cause in drm_atomic_helper_async_check()Simon Ser
This can help figure out why the kernel returns EINVAL from user-space. v2: add missing newlines Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220829151451.152114-2-contact@emersion.fr
2022-09-05drm/atomic-helper: print message on driver connector check failureSimon Ser
Sometimes drivers are missing logs when they return EINVAL. Printing the failure here in common code can help understand where EINVAL is coming from. All other atomic_check() calls in this file already have similar logging. v2: add missing newlines Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220829151451.152114-1-contact@emersion.fr
2022-09-05drm: hide unregistered connectors from GETCONNECTOR IOCTLSimon Ser
When registering a connector, the kernel sends a hotplug uevent in drm_connector_register(). When unregistering a connector, drivers are expected to send a uevent as well. However, user-space has no way to figure out that the connector isn't registered anymore: it'll still be reported in GETCONNECTOR IOCTLs. The documentation for DRM_CONNECTOR_UNREGISTERED states: > The connector […] has since been unregistered and removed from > userspace, or the connector was unregistered before it had a chance > to be exposed to userspace Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220801133754.461037-1-contact@emersion.fr
2022-09-05drm/i915/ttm: Abort suspend on i915_ttm_backup failureNirmoy Das
On system suspend when system memory is low then i915_gem_obj_copy_ttm() could fail trying to backup a lmem obj. GEM_WARN_ON() is not enough, suspend shouldn't continue if i915_ttm_backup() throws an error. v2: Keep the fdo issue till we have a igt test(Matt). v3: Use %pe(Andrzej) References: https://gitlab.freedesktop.org/drm/intel/-/issues/6529 Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Suggested-by: Chris P Wilson <chris.p.wilson@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901172217.18392-1-nirmoy.das@intel.com
2022-09-04drm/mediatek: dp: Audio support for MT8195Guillaume Ranquet
This patch adds audio support to the DP driver for MT8195 with up to 8 channels. Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-11-rex-bc.chen@mediatek.com
2022-09-04drm/mediatek: dp: Add hpd debounceJitao Shi
From the DP spec 1.4a chapter 3.3, upstream devices should implement HPD signal de-bouncing on an external connection. A period of 100ms should be used to detect an HPD connect event. To cover these cases, HPD de-bounce should be implemented only after HPD low has been detected for at least 100ms. Therefore, 1. If HPD is low (which means plugging out) for longer than 100ms: we need to do de-bouncing (which means we need to wait for 100ms). 2. If HPD low is for less than 100ms: we don't need to care about the de-bouncing. In this patch, we start a 100ms timer and use a need_debounce boolean to implement the feature. Two cases when HPD is high: 1. If the timer is expired (>100ms): - need_debounce is true. - When HPD high (plugging event comes), need_debounce will be true and then we need to do de-bouncing (wait for 100ms). 2. If the timer is not expired (<100ms): - need_debounce is false. - When HPD high (plugging event comes), need_debounce will be false and no need to do de-bouncing. HPD_______ __________________ | |<- 100ms -> |____________| <- 100ms -> Without HPD de-bouncing, USB-C to HDMI Adapaters will not be detected. The change has been successfully tested with the following devices: - Dell Adapter - USB-C to HDMI - Acer 1in1 HDMI dongle - Ugreen 1in1 HDMI dongle - innowatt HDMI + USB3 hub - Acer 2in1 HDMI dongle - Apple 3in1 HDMI dongle (A2119) - J5Create 3in1 HDMI dongle (JAC379) Tested-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-10-rex-bc.chen@mediatek.com
2022-09-04drm/mediatek: dp: Add MT8195 External DisplayPort supportGuillaume Ranquet
Add External DisplayPort support to the MT8195 eDP driver. Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-9-rex-bc.chen@mediatek.com
2022-09-04drm/mediatek: dp: Determine device of next_bridgeBo-Chen Chen
It's not necessary to have a next_bridge for DP device, so we add this patch to judge this. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-8-rex-bc.chen@mediatek.com
2022-09-04drm/mediatek: dp: Add multiple calibration data formats supportBo-Chen Chen
The calibration data formats of eDP and DP are different. We add "const struct mtk_dp_efuse_fmt *efuse_fmt" to the device data to define them. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-7-rex-bc.chen@mediatek.com
2022-09-04drm/mediatek: dp: Add multiple smc commands supportBo-Chen Chen
The smc commands of eDP and DP are different. We add smc_cmd to the device data to define them. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-6-rex-bc.chen@mediatek.com
2022-09-04drm/mediatek: dp: Add multiple bridge types supportBo-Chen Chen
The bridge types of eDP and DP are different. We add device data to this driver and add bridge_type to the device data to define them. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-5-rex-bc.chen@mediatek.com
2022-09-04drm/mediatek: Add MT8195 Embedded DisplayPort driverMarkus Schneider-Pargmann
This patch adds a embedded displayport driver for the MediaTek mt8195 SoC. It supports the MT8195, the embedded DisplayPort units. It offers DisplayPort 1.4 with up to 4 lanes. The driver creates a child device for the phy. The child device will never exist without the parent being active. As they are sharing a register range, the parent passes a regmap pointer to the child so that both can work with the same register range. The phy driver sets device data that is read by the parent to get the phy device that can be used to control the phy properties. This driver is based on an initial version by Jitao shi <jitao.shi@mediatek.com> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-4-rex-bc.chen@mediatek.com
2022-09-04video/hdmi: Add audio_infoframe packing for DPMarkus Schneider-Pargmann
Similar to HDMI, DP uses audio infoframes as well which are structured very similar to the HDMI ones. This patch adds a helper function to pack the HDMI audio infoframe for DP, called hdmi_audio_infoframe_pack_for_dp(). hdmi_audio_infoframe_pack_only() is split into two parts. One of them packs the payload only and can be used for HDMI and DP. Also constify the frame parameter in hdmi_audio_infoframe_check() as it is passed to hdmi_audio_infoframe_check_only() which expects a const. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-3-rex-bc.chen@mediatek.com
2022-09-04dt-bindings: mediatek,dp: Add Display Port bindingMarkus Schneider-Pargmann
This controller is present on several mediatek hardware. Currently mt8195 and mt8395 have this controller without a functional difference, so only one compatible field is added. The controller can have two forms, as a normal display port and as an embedded display port. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-2-rex-bc.chen@mediatek.com
2022-09-02drm/bridge: chrontel-ch7033: Add byteswap order settingChris Morgan
Add the option to set the byteswap order in the devicetree. For the official HDMI DIP for the NTC CHIP the byteswap order needs to be RGB, however the driver sets it as BGR. With this patch the driver will remain at BGR unless manually specified via devicetree. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220902153906.31000-3-macroalpha82@gmail.com
2022-09-02dt-bindings: Add byteswap order to chrontel ch7033Chris Morgan
Update dt-binding documentation to add support for setting byteswap of chrontel ch7033. New property name of chrontel,byteswap added to set the byteswap order. This property is optional. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220902153906.31000-2-macroalpha82@gmail.com
2022-09-02drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DPLaurent Pinchart
Implement the bridge connector-related .get_edid() and .detect() operations for full DP mode, and report the related bridge capabilities and type. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-4-tomi.valkeinen@ideasonboard.com
2022-09-02drm/bridge: ti-sn65dsi86: Support DisplayPort (non-eDP) modeLaurent Pinchart
Despite the SN65DSI86 being an eDP bridge, on some systems its output is routed to a DisplayPort connector. Enable DisplayPort mode when the next component in the display pipeline is detected as a DisplayPort connector, and disable eDP features in that case. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reworked to set bridge type based on the next bridge/connector. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> -- Changes since v1/RFC: - Rebased on top of "drm/bridge: ti-sn65dsi86: switch to devm_drm_of_get_bridge" - eDP/DP mode determined from the next bridge connector type. Changes since v2: - Remove setting of Standard DP Scrambler Seed. (It's read-only). - Prevent setting DP_EDP_CONFIGURATION_SET in ti_sn_bridge_atomic_enable() - Use Doug's suggested text for disabling ASSR on DP mode. Changes since v3: - Remove ASSR_CONTROL definition Changes since v4: - Refactor code to configure the DP/eDP scrambler in one place. Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-3-tomi.valkeinen@ideasonboard.com
2022-09-02drm/bridge: ti-sn65dsi86: Reject modes with too large blankingTomi Valkeinen
The front and back porch registers are 8 bits, and pulse width registers are 15 bits, so reject any modes with larger periods. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-2-tomi.valkeinen@ideasonboard.com
2022-09-02drm/i915/dp_mst: Fix mst_mgr lookup during atomic checkImre Deak
If an MST connector was disabled in the old state during a commit, the connector's best_encoder will be NULL, so we can't look up mst_mgr via it. Do the lookup instead via intel_connector->mst_port which always points to the primary encoder. This fixes the following: [ 58.922866] BUG: kernel NULL pointer dereference, address: 0000000000000170 [ 58.922867] #PF: supervisor read access in kernel mode [ 58.922868] #PF: error_code(0x0000) - not-present page [ 58.922869] PGD 0 P4D 0 [ 58.922870] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 58.922872] CPU: 0 PID: 133 Comm: kworker/0:2 Tainted: G U 6.0.0-rc3-imre+ #560 [ 58.922874] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3135.A00.2203251419 03/25/2022 [ 58.922874] Workqueue: events output_poll_execute [drm_kms_helper] [ 58.922879] RIP: 0010:intel_dp_mst_atomic_check+0xbb/0x1c0 [i915] [ 58.922955] Code: 5b 7b f6 ff 84 c0 75 41 48 8b 44 24 18 65 48 2b 04 25 28 00 00 00 0f 85 ff 00 00 00 48 8b 45 10 48 8b 93 10 07 00 00 4c 89 e7 <48> 8b b0 70 01 00 00 48 83 c4 20 5b 5d 48 81 c6 f0 0c 00 00 41 5c [ 58.922956] RSP: 0018:ffffc90000633a88 EFLAGS: 00010246 [ 58.922957] RAX: 0000000000000000 RBX: ffff888117d19000 RCX: ffff888101893308 [ 58.922958] RDX: ffff888122981000 RSI: ffffffff82309ecc RDI: ffff888114da6800 [ 58.922959] RBP: ffff8881094bab48 R08: 0000000081917436 R09: 0000000068191743 [ 58.922960] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888114da6800 [ 58.922960] R13: ffff8881143f8000 R14: 0000000000000000 R15: ffff888119bf2000 [ 58.922961] FS: 0000000000000000(0000) GS:ffff888496200000(0000) knlGS:0000000000000000 [ 58.922962] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 58.922962] CR2: 0000000000000170 CR3: 0000000005612004 CR4: 0000000000770ef0 [ 58.922963] PKRU: 55555554 [ 58.922963] Call Trace: [ 58.922964] <TASK> [ 58.922966] drm_atomic_helper_check_modeset+0x3f8/0xc70 [drm_kms_helper] [ 58.922972] intel_atomic_check+0xb1/0x3180 [i915] [ 58.923059] ? find_held_lock+0x2b/0x80 [ 58.923064] drm_atomic_check_only+0x5d3/0xa60 [drm] [ 58.923082] drm_atomic_commit+0x56/0xc0 [drm] [ 58.923097] ? drm_plane_get_damage_clips.cold+0x1c/0x1c [drm] [ 58.923114] drm_client_modeset_commit_atomic+0x235/0x280 [drm] [ 58.923132] drm_client_modeset_commit_locked+0x5b/0x190 [drm] [ 58.923148] drm_client_modeset_commit+0x24/0x50 [drm] [ 58.923164] drm_fb_helper_set_par+0xae/0xe0 [drm_kms_helper] [ 58.923171] drm_fb_helper_hotplug_event+0xd5/0xf0 [drm_kms_helper] [ 58.923178] output_poll_execute+0xac/0x200 [drm_kms_helper] [ 58.923187] process_one_work+0x268/0x580 [ 58.923190] ? process_one_work+0x580/0x580 [ 58.923191] worker_thread+0x52/0x3b0 [ 58.923193] ? process_one_work+0x580/0x580 [ 58.923195] kthread+0xf0/0x120 [ 58.923196] ? kthread_complete_and_exit+0x20/0x20 [ 58.923198] ret_from_fork+0x1f/0x30 [ 58.923202] </TASK> Fixes: ffac9721939d ("drm/display/dp_mst: Don't open code modeset checks for releasing time slots") Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220901161933.1004778-1-imre.deak@intel.com
2022-09-01drm/amd/display: fix indentation in commit_planes_for_stream()Hamza Mahfooz
Address the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3508:9: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation] 3508 | if (update_type != UPDATE_TYPE_FAST) | ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3510:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 3510 | if (update_type != UPDATE_TYPE_FAST) | ^~ Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amd/display: remove a duplicated declarationAsher Song
There are duplicated declarations of i, remove one of those. Signed-off-by: Asher Song <Asher.Song@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu/vcn: Add MMSCH v4_0 support for sriovJane Jian
These structures are basically ported from MMSCH v3_0, besides, added RB and RB4 enablement flag to support unified queue Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu/vcn: Add sriov VCN v4_0 unified queue supportJane Jian
Enable unified queue support for sriov, abandon all previous multi-queue settings Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu/vcn: Add vcn/vcn1 in white list to load its firmware under sriovJane Jian
Previously since vcn0/vcn1 are not enabled, loading firmware is skipped. Now add firmware loading back since vcn0/vcn1 has already been enabled on sriov Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu/vcn: Disable CG/PG for SRIOVJane Jian
For sriov, CG and MG are controlled from hypervisor side, no need to manage them again in ip init Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amd: Skip smu_v13 register irq on SRIOV VFYifan Zha
[Why] VF do not need to handle SMU IRQ state. L1 Policy will block VF access THM_THERMAL_INT_CTRL and MP1_SMN_IH_SW_INT/CNTL. [How] Skip smu_v13 init register_irq_handler under SRIOV VF. And add irq_src check in enable/disable thermal alert to avoid thermal alert enable/disable fail. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/admgpu: Skip CG/PG on SOC21 under SRIOV VFYifan Zha
[Why] There is no CG(Clock Gating)/PG(Power Gating) requirement on SRIOV VF. For multi VF, VF should not enable any CG/PG features. For one VF, PF will program CG/PG related registers. [How] Do not set any cg/pg flag bit at early init under sriov. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: Use RLCG to program GRBM_GFX_CNTL during full access timeYifan Zha
[Why] KIQ register init requires GRBM_GFX_CNTL to select KIQ. [How] As RLCG accessing registers will save the data of GRBM_GFX_CNTL and restore it. Use RLCG indirect accessing register method to select grbm instead of mmio directly access. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: Skip program SDMA0_SEM_WAIT_FAIL_TIMER_CNTL under SRIOV VFYifan Zha
[Why] As SDMA0_SEM_WAIT_FAIL_TIMER_CNTL is a PF-only register, L1 would block this register for VF access. [How] VF do not program it. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: Skip the VRAM base offset on SRIOVYifan Zha
[Why] As VF cannot read MMMC_VM_FB_OFFSET with L1 Policy(read 0xffffffff). It leads to driver get the incorrect vram base offset. [How] Since SR-IOV is dGPU only, skip reading this register and set the fb_offest to 0. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 22:32:31 +0000