summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-16net: team: Unsync device addresses on ndo_stopBenjamin Poirier
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: bonding: Unsync device addresses on ndo_stopBenjamin Poirier
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former bond slaves after a bond has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls, via bond_hw_addr_flush(), at their expected location, bond_close(). Add dev_mc_add() call to bond_open() to match the above change. v3: * When adding or deleting a slave, only sync/unsync, add/del addresses if the bond is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: bonding: Share lacpdu_mcast_addr definitionBenjamin Poirier
There are already a few definitions of arrays containing MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all contain the same constant data so define one common instance for all bonding code. Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-08 (ice, iavf) This series contains updates to ice and iavf drivers. Dave removes extra unplug of auxiliary bus on reset which caused a scheduling while atomic to be reported for ice. Ding Hui defers setting of queues for TCs to ensure valid configuration and restores old config if invalid for ice. Sylwester fixes a check of setting MAC address to occur after result is received from PF for iavf driver. Brett changes check of ring tail to use software cached value as not all devices have access to register tail for iavf driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: marvell: prestera: add support for for Aldrin2Oleksandr Mazur
Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support. Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> V2: - retarget to net tree instead of net-next; - fix missed colon in patch subject ('net marvell' vs 'net: mavell'); Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net/ieee802154: fix uninit value bug in dgram_sendmsgHaimin Zhang
There is uninit value bug in dgram_sendmsg function in net/ieee802154/socket.c when the length of valid data pointed by the msg->msg_name isn't verified. We introducing a helper function ieee802154_sockaddr_check_size to check namelen. First we check there is addr_type in ieee802154_addr_sa. Then, we check namelen according to addr_type. Also fixed in raw_bind, dgram_bind, dgram_connect. Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16irqchip/loongson-pch-lpc: Add dependence on LoongArchJianmin Lv
The loongson-pch-lpc driver may be selected in a random configuration, but it is only supported for LoongArch, So, the dependence on LoongArch is added for it to avoid compile error for a random configuration of other architetures. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220916071926.28368-1-lvjianmin@loongson.cn
2022-09-16xen/xenbus: fix xenbus_setup_ring()Juergen Gross
Commit 4573240f0764 ("xen/xenbus: eliminate xenbus_grant_ring()") introduced an error for initialization of multi-page rings. Cc: stable@vger.kernel.org Fixes: 4573240f0764 ("xen/xenbus: eliminate xenbus_grant_ring()") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-09-16Merge tag 'drm-intel-fixes-2022-09-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Revert a display patch around max DP source rate now that the proper WaEdpLinkRateDataReload is in place. (Ville) - Fix perf limit reasons bit position. (Ashutosh) - Fix unclaimmed mmio registers on suspend flow with GuC. (Umesh) - A vma_move_to_active fix for a regression with video decoding. (Nirmoy) - DP DSP fix. (Ankit) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YyMtmGMXRLsURoM5@intel.com
2022-09-16Merge tag 'drm-misc-fixes-2022-09-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * gma500: Locking and IRQ fixes * meson: OSD1 display fixes * panel-edp: Fix Innolux timings * rockchip: DP/HDMI fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YyMUpP1w21CPXq+I@linux-uq9g
2022-09-16Merge tag 'amd-drm-fixes-6.0-2022-09-14' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-14: amdgpu: - BACO fixes for some RDNA2 boards - PCI AER fixes uncovered by a core PCI change - Properly hook up dirtyfb helper - RAS fixes for GC 11.x - TMR fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - LLVM DML stack size fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220914184030.6145-1-alexander.deucher@amd.com
2022-09-15scsi: mpt3sas: Fix return value check of dma_get_required_mask()Sreekanth Reddy
Fix the incorrect return value check of dma_get_required_mask(). Due to this incorrect check, the driver was always setting the DMA mask to 63 bit. Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.com Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts()Rafael Mendonca
Commit 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG") made the __qlt_24xx_handle_abts() function return early if tcm_qla2xxx_find_cmd_by_tag() didn't find a command, but it missed to clean up the allocated memory for the management command. Link: https://lore.kernel.org/r/20220914024924.695604-1-rafaelmendsr@gmail.com Fixes: 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15scsi: qedf: Fix a UAF bug in __qedf_probe()Letu Ren
In __qedf_probe(), if qedf->cdev is NULL which means qed_ops->common->probe() failed, then the program will goto label err1, and scsi_host_put() will free lport->host pointer. Because the memory qedf points to is allocated by libfc_host_alloc(), it will be freed by scsi_host_put(). However, the if statement below label err0 only checks whether qedf is NULL but doesn't check whether the memory has been freed. So a UAF bug can occur. There are two ways to reach the statements below err0. The first one is described as before, "qedf" should be set to NULL. The second one is goto "err0" directly. In the latter scenario qedf hasn't been changed and it has the initial value NULL. As a result the if statement is not reachable in any situation. The KASAN logs are as follows: [ 2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] [ 2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 2.312969] Call Trace: [ 2.312969] dump_stack_lvl+0x59/0x7b [ 2.312969] print_address_description+0x7c/0x3b0 [ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] __kasan_report+0x160/0x1c0 [ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] kasan_report+0x4b/0x70 [ 2.312969] ? kobject_put+0x25d/0x290 [ 2.312969] kasan_check_range+0x2ca/0x310 [ 2.312969] __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] ? selinux_kernfs_init_security+0xdc/0x5f0 [ 2.312969] ? trace_rpm_return_int_rcuidle+0x18/0x120 [ 2.312969] ? rpm_resume+0xa5c/0x16e0 [ 2.312969] ? qedf_get_generic_tlv_data+0x160/0x160 [ 2.312969] local_pci_probe+0x13c/0x1f0 [ 2.312969] pci_device_probe+0x37e/0x6c0 Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com Reported-by: Zheyu Ma <zheyuma97@gmail.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Co-developed-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()Florian Fainelli
Commit 9a073d4fbb18 ("soc: bcm: brcmstb: biuctrl: Add missing of_node_put()") added what was thought to be a missing of_node_put() but now causes a double of_node_put() to be called, once from setup_hifcpubiuctrl_regs() and another time from brcmstb_biuctrl_init(). Ensure that setup_hifcpubiuctrl_regs() is not calling of_node_put() since it is not obvious it does that on one of its parameters. Fixes: 9a073d4fbb18 ("soc: bcm: brcmstb: biuctrl: Add missing of_node_put()") Reported-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Change-Id: I1c405c36c2f06c8b8c0f684143b7a52db7e809f0
2022-09-15Merge tag 'at91-fixes-6.0-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.0 #2 It contains a fix for LAN966 SoCs that corrects the interrupt number for internal PHYs. * tag 'at91-fixes-6.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: lan966x: Fix the interrupt number for internal PHYs Link: https://lore.kernel.org/r/20220915105833.4159850-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-15io_uring/msg_ring: check file type before puttingJens Axboe
If we're invoked with a fixed file, follow the normal rules of not calling io_fput_file(). Fixed files are permanently registered to the ring, and do not need putting separately. Cc: stable@vger.kernel.org Fixes: aa184e8671f0 ("io_uring: don't attempt to IOPOLL for MSG_RING requests") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-15ALSA: hda/realtek: Add quirk for ASUS GA503R laptopLuke D. Jones
The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs as early models and the G14, this includes bass speakers which are by default mapped incorrectly to the 0x06 node. Add a quirk to use the same DAC pairs as the G14. Signed-off-by: Luke D. Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220915080921.35563-4-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-15ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jackLuke D. Jones
Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220915080921.35563-3-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-15ALSA: hda/realtek: Add pincfg for ASUS G513 HP jackLuke D. Jones
Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220915080921.35563-2-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-15ALSA: hda/realtek: Re-arrange quirk table entriesTakashi Iwai
A few entries have been mistakenly inserted in wrong positions without considering the SSID ordering. Place them at right positions. Fixes: b7557267c233 ("ALSA: hda/realtek: Add quirk for ASUS GA402") Fixes: 94db9cc8f8fa ("ALSA: hda/realtek: Add quirk for ASUS GU603") Fixes: 739d0959fbed ("ALSA: hda: Add quirk for ASUS Flow x13") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220915154724.31634-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-15ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptopCallum Osmotherly
Just as with the 5570 (and the other Dell laptops), this enables the two subwoofer speakers on the Dell Precision 5530 together with the main ones, significantly increasing the audio quality. I've tested this myself on a 5530 and can confirm it's working as expected. Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-15Merge tag 'imx-fixes-6.0-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.0, 2nd round: - A couple of TQMa8MPQL device tree fixes from Alexander Stein on button GPIOs and PCF85063 RTC alarm pinctrl. - Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix build errors when this SoM dtsi is included on customer carrier boards. - Remove GPU power domain reset from i.MX8MN device tree to fix a sporadical hang seen with GPUMIX powering up. - Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo board. - Add ARCH_NXP back to defconfig, which was dropped accidentally by commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms together"). - Add missing #reset-cells for i.MX8ULP PCC clock controllers. - Update PMIC voltages for imx8mm-verdin board to fix an issue with one Toradex SKU that uses a consumer-grade chip that is capable of going up to 1.8GHz at 1.00V. - A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and phy-mode. * tag 'imx-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header arm64: defconfig: enable ARCH_NXP arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm arm64: dts: imx8mm-verdin: extend pmic voltages arm64: dts: imx8ulp: add #reset-cells for pcc arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs arm64: dts: imx8mn: remove GPU power domain reset arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-15Merge tag 'thunderbolt-for-v6.0-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: "thunderbolt: Fix for v6.0-rc6 This includes a single commit adding missing PCI ID for Intel Maple Ridge Thunderbolt 4 single port controller. This has been in linux-next with no reported issues." * tag 'thunderbolt-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Add support for Intel Maple Ridge single port controller
2022-09-15Revert "driver core: Set fw_devlink.strict=1 by default"Greg Kroah-Hartman
This reverts commit 71066545b48e4259f89481199a0bbc7c35457738. It causes boot problems on some systems, so revert it for now until it is worked out. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Saravana Kannan <saravanak@google.com> Fixes: 71066545b48e ("driver core: Set fw_devlink.strict=1 by default") Reported-by: Olof Johansson <olof@lixom.net> Link: https://lore.kernel.org/r/CAOesGMjQHhTUMBGHQcME4JBkZCof2NEQ4gaM1GWFgH40+LN9AQ@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15blk-lib: fix blkdev_issue_secure_eraseMikulas Patocka
There's a bug in blkdev_issue_secure_erase. The statement "unsigned int len = min_t(sector_t, nr_sects, max_sectors);" sets the variable "len" to the length in sectors, but the statement "bio->bi_iter.bi_size = len" treats it as if it were in bytes. The statements "sector += len << SECTOR_SHIFT" and "nr_sects -= len << SECTOR_SHIFT" are thinko. This patch fixes it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v5.19 Fixes: 44abff2c0b97 ("block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD") Link: https://lore.kernel.org/r/alpine.LRH.2.02.2209141549480.28100@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-15parisc: Allow CONFIG_64BIT with ARCH=pariscHelge Deller
The previous patch triggered a build failure for the debian kernel, which has CONFIG_64BIT enabled, uses the CROSS_COMPILER environment variable and uses ARCH=parisc to configure the kernel for 64-bit support. This patch weakens the previous patch while keeping the recommended way to configure the kernel with: ARCH=parisc -> build 32-bit kernel ARCH=parisc64 -> build 64-bit kernel while adding the possibility for debian to configure a 64-bit kernel even if ARCH=parisc is set (PA8X00 CPU has to be selected and CONFIG_64BIT needs to be enabled). The downside of this patch is, that we now have a small window open again where people may get it wrong: if they enable CONFIG_64BIT and try to compile with a 32-bit compiler. Fixes: 3dcfb729b5f4 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only") Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # 5.15+
2022-09-15parisc: remove obsolete manual allocation aligning in iosapicRolf Eike Beer
kmalloc() returns memory with __assume_kmalloc_alignment, which is __alignof__(unsigned long long) for parisc. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2022-09-14drm/amdgpu/mes: zero the sdma_hqd_mask of 2nd SDMA engine for SDMA 6.0.1Yifan Zhang
there is only one SDMA engine in SDMA 6.0.1, the sdma_hqd_mask has to be zeroed for the 2nd engine, otherwise MES scheduler will consider 2nd engine exists and map/unmap SDMA queues to the non-existent engine. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-14drm/amdgpu: make sure to init common IP before gmcAlex Deucher
Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-09-14drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vegaAlex Deucher
This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-09-14drm/amdgpu: move nbio ih_doorbell_range() into ih code for vegaAlex Deucher
This mirrors what we do for other asics and this way we are sure the ih doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. In this case IH is initialized before GFX, so there should be no issue. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-09-14arm64: dts: qcom: sc8280xp-x13s: Update firmware locationManivannan Sadhasivam
The firmware location in linux-firmware has been changed to include the SoC name. So use the updated location in Thinkpad devicetree. Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220914073922.7145-1-manivannan.sadhasivam@linaro.org
2022-09-14selftests/landlock: Fix out-of-tree buildsMickaël Salaün
These changes simplify the Makefile and handle these 5 ways to build Landlock tests: - make -C tools/testing/selftests/landlock - make -C tools/testing/selftests TARGETS=landlock gen_tar - make TARGETS=landlock kselftest-gen_tar - make TARGETS=landlock O=build kselftest-gen_tar - make -C /tmp/linux TARGETS=landlock O=/tmp/build kselftest-gen_tar This also makes $(KHDR_INCLUDES) available to other test collections when building in their directory. Fixes: f1227dc7d041 ("selftests/landlock: fix broken include of linux/landlock.h") Fixes: 3bb267a36185 ("selftests: drop khdr make target") Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Guillaume Tucker <guillaume.tucker@collabora.com> Cc: Mark Brown <broonie@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20220909103402.1501802-1-mic@digikod.net
2022-09-14pinctrl: ocelot: Fix interrupt controllerHoratiu Vultur
When an external device generated a level based interrupt then the interrupt controller could miss the interrupt. The reason is that the interrupt controller can detect only link changes. In the following example, if there is a PHY that generates an interrupt then the following would happen. The GPIO detected that the interrupt line changed, and then the 'ocelot_irq_handler' was called. Here it detects which GPIO line saw the change and for that will call the following: 1. irq_mask 2. phy interrupt routine 3. irq_eoi 4. irq_unmask And this works fine for simple cases, but if the PHY generates many interrupts, for example when doing PTP timestamping, then the following could happen. Again the function 'ocelot_irq_handler' will be called and then from here the following could happen: 1. irq_mask 2. phy interrupt routine 3. irq_eoi 4. irq_unmask Right before step 3(irq_eoi), the PHY will generate another interrupt. Now the interrupt controller will acknowledge the change in the interrupt line. So we miss the interrupt. A solution will be to use 'handle_level_irq' instead of 'handle_fasteoi_irq', because for this will change routine order of handling the interrupt. 1. irq_mask 2. irq_ack 3. phy interrupt routine 4. irq_unmask And now if the PHY will generate a new interrupt before irq_unmask, the interrupt controller will detect this because it already acknowledge the change in interrupt line at step 2(irq_ack). But this is not the full solution because there is another issue. In case there are 2 PHYs that share the interrupt line. For example phy1 generates an interrupt, then the following can happen: 1.irq_mask 2.irq_ack 3.phy0 interrupt routine 4.phy1 interrupt routine 5.irq_unmask In case phy0 will generate an interrupt while clearing the interrupt source in phy1, then the interrupt line will be kept down by phy0. So the interrupt controller will not see any changes in the interrupt line. The solution here is to update 'irq_unmask' such that it can detect if the interrupt line is still active or not. And if it is active then call again the procedure to clear the interrupts. But we don't want to do it every time, only if we know that the interrupt controller has not seen already that the interrupt line has changed. While at this, add support also for IRQ_TYPE_LEVEL_LOW. Fixes: be36abb71d878f ("pinctrl: ocelot: add support for interrupt controller") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220909145942.844102-1-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-14gpio: mt7621: Make the irqchip immutableSergio Paracuellos
Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as immutable") added a warning to indicate if the gpiolib is altering the internals of irqchips. Following this change the following warnings are now observed for the mt7621 driver: gpio gpiochip0: (1e000600.gpio-bank0): not an immutable chip, please consider fixing it! gpio gpiochip1: (1e000600.gpio-bank1): not an immutable chip, please consider fixing it! gpio gpiochip2: (1e000600.gpio-bank2): not an immutable chip, please consider fixing it! Fix this by making the irqchip in the mt7621 driver immutable. Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-14mmc: moxart: fix 4-bit bus width and remove 8-bit bus widthSergei Antonov
According to the datasheet [1] at page 377, 4-bit bus width is turned on by bit 2 of the Bus Width Register. Thus the current bitmask is wrong: define BUS_WIDTH_4 BIT(1) BIT(1) does not work but BIT(2) works. This has been verified on real MOXA hardware with FTSDC010 controller revision 1_6_0. The corrected value of BUS_WIDTH_4 mask collides with: define BUS_WIDTH_8 BIT(2). Additionally, 8-bit bus width mode isn't supported according to the datasheet, so let's remove the corresponding code. [1] https://bitbucket.org/Kasreyn/mkrom-uc7112lx/src/master/documents/FIC8120_DS_v1.2.pdf Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220907205753.1577434-1-saproj@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-14mmc: sdhci: Fix host->cmd is nullWenchao Chen
When data crc occurs, the kernel will panic because host->cmd is null. Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Fixes: efe8f5c9b5e1 ("mmc: sdhci: Capture eMMC and SD card errors") Cc: stable@vger.kernel.org Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220907035847.13783-1-wenchao.chen666@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-14Merge tag 'devicetree-fixes-for-6.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Update some stale binding maintainer emails - Fix property name error in apple,aic binding - Add missing param to of_dma_configure_id() stub - Fix an off-by-one error in unflatten_dt_nodes() * tag 'devicetree-fixes-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: qcom: drop non-working codeaurora.org emails dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails dt-bindings: apple,aic: Fix required item "apple,fiq-index" in affinity description dt-bindings: interconnect: fsl,imx8m-noc: drop Leonard Crestez of/device: Fix up of_dma_configure_id() stub MAINTAINERS: Update email of Neil Armstrong of: fdt: fix off-by-one error in unflatten_dt_nodes()
2022-09-14ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptopCallum Osmotherly
The Dell Precision 5570 uses the same 4-speakers-on-ALC289 just like the previous Precision 5560. I replicated that patch onto this one, and can confirm that the audio is much better (the woofers are now working); I've tested it on my Dell Precision 5570. Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/YyGbWM5wEoFMbW2v@piranha Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-14cifs: update internal module numberSteve French
To 2.39 Signed-off-by: Steve French <stfrench@microsoft.com>
2022-09-14cifs: add missing spinlock around tcon refcountPaulo Alcantara
Add missing spinlock to protect updates on tcon refcount in cifs_put_tcon(). Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data") Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-09-14drm/rockchip: Fix return type of cdn_dp_connector_mode_validNathan Huckleberry
The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of cdn_dp_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220913205555.155149-1-nhuck@google.com
2022-09-14clk: microchip: mpfs: make the rtc's ahb clock criticalConor Dooley
The onboard RTC's AHB bus clock must be kept running as the RTC will stop & lose track of time if the AHB interface clock is disabled. Fixes: 635e5e73370e ("clk: microchip: Add driver for Microchip PolarFire SoC") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-3-conor.dooley@microchip.com
2022-09-14clk: microchip: mpfs: fix clk_cfg array bounds violationConor Dooley
There is an array bounds violation present during clock registration, triggered by current code by only specific toolchains. This seems to fail gracefully in v6.0-rc1, using a toolchain build from the riscv- gnu-toolchain repo and with clang-15, and life carries on. While converting the driver to use standard clock structs/ops, kernel panics were seen during boot when built with clang-15: [ 0.581754] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b1 [ 0.591520] Oops [#1] [ 0.594045] Modules linked in: [ 0.597435] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-00011-g8e1459cf4eca #1 [ 0.606188] Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) [ 0.613012] epc : __clk_register+0x4a6/0x85c [ 0.617759] ra : __clk_register+0x49e/0x85c [ 0.622489] epc : ffffffff803faf7c ra : ffffffff803faf74 sp : ffffffc80400b720 [ 0.630466] gp : ffffffff810e93f8 tp : ffffffe77fe60000 t0 : ffffffe77ffb3800 [ 0.638443] t1 : 000000000000000a t2 : ffffffffffffffff s0 : ffffffc80400b7c0 [ 0.646420] s1 : 0000000000000001 a0 : 0000000000000001 a1 : 0000000000000000 [ 0.654396] a2 : 0000000000000001 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.662373] a5 : ffffffff803a5810 a6 : 0000000200000022 a7 : 0000000000000006 [ 0.670350] s2 : ffffffff81099d48 s3 : ffffffff80d6e28e s4 : 0000000000000028 [ 0.678327] s5 : ffffffff810ed3c8 s6 : ffffffff810ed3d0 s7 : ffffffe77ffbc100 [ 0.686304] s8 : ffffffe77ffb1540 s9 : ffffffe77ffb1540 s10: 0000000000000008 [ 0.694281] s11: 0000000000000000 t3 : 00000000000000c6 t4 : 0000000000000007 [ 0.702258] t5 : ffffffff810c78c0 t6 : ffffffe77ff88cd0 [ 0.708125] status: 0000000200000120 badaddr: 00000000000000b1 cause: 000000000000000d [ 0.716869] [<ffffffff803fb892>] devm_clk_hw_register+0x62/0xaa [ 0.723420] [<ffffffff80403412>] mpfs_clk_probe+0x1e0/0x244 In v6.0-rc1 and later, this issue is visible without the follow on patches doing the conversion using toolchains provided by our Yocto meta layer too. It fails on "clk_periph_timer" - which uses a different parent, that it tries to find using the macro: \#define PARENT_CLK(PARENT) (&mpfs_cfg_clks[CLK_##PARENT].cfg.hw) If parent is RTCREF, so the macro becomes: &mpfs_cfg_clks[33].cfg.hw which is well beyond the end of the array. Amazingly, builds with GCC 11.1 see no problem here, booting correctly and hooking the parent up etc. Builds with clang-15 do not, with the above panic. Change the macro to use specific offsets depending on the parent rather than the dt-binding's clock IDs. Fixes: 1c6a7ea32b8c ("clk: microchip: mpfs: add RTCREF clock control") CC: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-2-conor.dooley@microchip.com
2022-09-13cifs: always initialize struct msghdr smb_msg completelyStefan Metzmacher
So far we were just lucky because the uninitialized members of struct msghdr are not used by default on a SOCK_STREAM tcp socket. But as new things like msg_ubuf and sg_from_iter where added recently, we should play on the safe side and avoid potention problems in future. Signed-off-by: Stefan Metzmacher <metze@samba.org> Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-09-13cifs: don't send down the destination address to sendmsg for a SOCK_STREAMStefan Metzmacher
This is ignored anyway by the tcp layer. Signed-off-by: Stefan Metzmacher <metze@samba.org> Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-09-14arm64: dts: imx8mp-venice-gw74xx: fix port/phy validationTim Harvey
Since commit 65ac79e18120 ("net: dsa: microchip: add the phylink get_caps") the phy-mode must be set otherwise the switch driver will assume "NA" mode and invalidate the port. Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-13block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowaitStefan Roesch
Today blk_queue_enter() and __bio_queue_enter() return -EBUSY for the nowait code path. This is not correct: they should return -EAGAIN instead. This problem was detected by fio. The following command exposed the above problem: t/io_uring -p0 -d128 -b4096 -s32 -c32 -F1 -B0 -R0 -X1 -n24 -P1 -u1 -O0 /dev/ng0n1 By applying the patch, the retry case is handled correctly in the slow path. Signed-off-by: Stefan Roesch <shr@fb.com> Fixes: bfd343aa1718 ("blk-mq: don't wait in blk_mq_queue_enter() if __GFP_WAIT isn't set") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-13drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usageNathan Chancellor
This function consumes a lot of stack space and it blows up the size of dml30_ModeSupportAndSystemConfigurationFull() with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3542:6: error: stack frame size (2200) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Commit a0f7e7f759cf ("drm/amd/display: fix i386 frame size warning") aimed to address this for i386 but it did not help x86_64. To reduce the amount of stack space that dml30_ModeSupportAndSystemConfigurationFull() uses, mark UseMinimumDCFCLK() as noinline, using the _for_stack variant for documentation. While this will increase the total amount of stack usage between the two functions (1632 and 1304 bytes respectively), it will make sure both stay below the limit of 2048 bytes for these files. The aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage so it should not be reverted in favor of this change. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com> Tested-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 05:23:00 +0000