Age | Commit message (Collapse) | Author |
|
Restrict the ucode loading check to avoid frontdoor loading error.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need to inform PCODE of a desired ring frequencies so PCODE update
the memory frequencies to us. rps->min_freq and rps->max_freq are the
frequencies used in that request. However they were unset when SLPC was
enabled and PCODE never updated the memory freq.
v2 (as Suggested by Ashutosh): if SLPC is in use, let's pick the right
frequencies from the get_ia_constants instead of the fake init of
rps' min and max.
v3: don't forget the max <= min return
v4: Move all the freq conversion to intel_rps.c. And the max <= min
check to where it belongs.
v5: (Ashutosh) Fix old comment s/50 HZ/50 MHz and add a doc explaining
the "raw format"
Fixes: 7ba79a671568 ("drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831214538.143950-1-rodrigo.vivi@intel.com
|
|
Expecting to observe a specific value, when the function responsible for
setting the value has failed will lead to extra noise in test output.
Use assert when the situation calls for it.
Also - very small tidying up around the changed areas (whitespace).
v2: Leave out the locals (drm_connector is huge) (lkp)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817211236.252091-2-michal.winiarski@intel.com
|
|
Negative tests can be expressed as a single parameterized test case,
which highlights that we're following the same test logic (passing
invalid cmdline and expecting drm_mode_parse_command_line_for_connector
to fail), which improves readability.
v2: s/negative/invalid to be consistent with other testcases in DRM
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817211236.252091-1-michal.winiarski@intel.com
|
|
Like commit c4f135d643823a86 ("workqueue: Wrap flush_workqueue() using a
macro") says, flush_scheduled_work() is dangerous and will be forbidden.
We are on the way for removing all flush_scheduled_work() callers from
the kernel, and this patch is for removing flush_scheduled_work() call
from cadence driver.
Since cdns-mhdp8546 driver uses 4 works
mhdp->modeset_retry_work
mhdp->hpd_work
mhdp->hdcp.check_work
mhdp->hdcp.prop_work
I assume that flush_scheduled_work() in cdns_mhdp_remove() needs to wait
for only these 4 works.
Since mhdp->modeset_retry_work already uses cancel_work_sync(), I assume
that flush_scheduled_work() needs to wait for only 3 works. But I came to
wonder whether mhdp->hdcp.check_work should be flushed or cancelled.
While flush_scheduled_work() waits for completion of works which were
already queued to system_wq, mhdp->hdcp.check_work is a delayed work.
That is, this work won't be queued to system_wq unless timeout expires.
Current code will wait for mhdp->hdcp.check_work only if timeout already
expired. If timeout is not expired yet, flush_scheduled_work() will fail
to cancel mhdp->hdcp.check_work, and cdns_mhdp_hdcp_check_work() which is
triggered by mhdp->hdcp.check_work will schedule hdcp->check_work, which
is too late for flush_scheduled_work() to wait for completion of
cdns_mhdp_hdcp_prop_work().
But since I couldn't get comments on how do we want to handle this race
window [1], this patch chose "do nothing" for mhdp->hdcp.check_work and
mhdp->hdcp.prop_work. That is, I assume that flush_scheduled_work() in
cdns_mhdp_remove() needs to wait for only mhdp->hpd_work work.
Link: https://lkml.kernel.org/r/943273cb-c2ec-24e3-5edb-64eacc6e2d30@I-love.SAKURA.ne.jp [1]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/216591bc-28bb-0453-10bb-59e268dff540@I-love.SAKURA.ne.jp
|
|
Convert to io-pgtable's bulk {map,unmap}_pages() APIs, to help the old
single-page interfaces eventually go away. Unmapping heap BOs still
wants to be done a page at a time, but everything else can get the full
benefit of the more efficient interface.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/daef7f8c134d989c55636a5790d8c0fcaca1bae3.1661205687.git.robin.murphy@arm.com
|
|
Fix for intel_guc_slpc_set_min_freq() warn:
inconsistent returns '&slpc->lock'.
v2: Avoid with_intel_runtime_pm with the
internal goto/return. (Ashutosh)
Also standardize the 'ret' if this came from
the efficient setup. And avoid the 'unlikely'.
Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830193537.52201-1-rodrigo.vivi@intel.com
|
|
Return the value sdma_v4_0_start() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ip block support for mes v11_0_3.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ip block support for gfx v11_0_3.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set AMDGPU_FAMILY_GC_11_0_0.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All gc v11_0_3 registers in gcvml2 range have different
register offset from the ones in gc v11_0_0. v11_0_3
imu_rlc_ram programming has to be separated from v11_0_0
implementation
v2: fix checkpatch errors (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Added missing cases for GFX 11.0.3 code in a few switch statements.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
initialize some gfx config for gfx v11_0_3
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To support new mes ip block
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To support new gfx ip block
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ip block support for gmc v11_0_3.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
initialize gmc sw config for v11_0_3
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add gfxhub_v3_0_3 support
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gc v11_0_3 register offset and shift masks
header files
v2: update registers (Alex)
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Not all the gfx10 variants need to integrate
global tap_delay and per se tap_delay firmwares
Only init tap_delay ucode when it does include in
rlc ucode binary so driver doesn't send a null buffer
to psp for firmware loading
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On client DG2 platforms, optimal performance is achieved with the
hardware's default "age based" thread execution setting. However on
ATS-M, switching this to "round robin after dependencies" provides
better performance. We'll add a new "tuning" feature flag to the ATS-M
device info to enable/disable this setting.
Bspec: 68331
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826212718.409948-1-matthew.d.roper@intel.com
|
|
This reverts commit ca6920811aa5428270dd78af0a7a36b10119065a.
The intent of Wa_14015141709 was to inform us that userspace can no
longer control object-level preemption as it has on past platforms
(i.e., by twiddling register bit CS_CHICKEN1[0]). The description of
the workaround in the spec wasn't terribly well-written, and when we
requested clarification from the hardware teams we were told that on the
kernel side we should also probably stop setting
FF_SLICE_CS_CHICKEN1[14], which is the register bit that directs the
hardware to honor the settings in per-context register CS_CHICKEN1. It
turns out that this guidance about FF_SLICE_CS_CHICKEN1[14] was a
mistake; even though CS_CHICKEN1[0] is non-operational and useless to
userspace, there are other bits in the register that do still work and
might need to be adjusted by userspace in the future (e.g., to implement
other workarounds that show up). If we don't set
FF_SLICE_CS_CHICKEN1[14] in i915, then those future workarounds would
not take effect.
This miscommunication came to light because another workaround
(Wa_16013994831) has now shown up that requires userspace to adjust the
value of CS_CHICKEN[10] in certain circumstances. To ensure userspace's
updates to this chicken bit are handled properly by the hardware, we
need to make sure that FF_SLICE_CS_CHICKEN1[14] is once again set by the
kernel.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826210233.406482-1-matthew.d.roper@intel.com
|
|
panel-edp changes go through the drm-misc tree (as per the "DRM PANEL
DRIVERS" entry in MAINTAINERS), but ever since splitting panel-edp out
of panel-simple I've been trying to keep a close eye on it. Make that
official by listing me as a reviewer.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822105340.1.I66a9a5577f9b0af66492ef13c47bc78ed85e5d6b@changeid
|
|
In case of Small BAR configurations stolen local memory can be unmappable.
Since the test does not touch the memory, passing I915_BO_ALLOC_GPU_ONLY
flag to i915_gem_object_create_region, will prevent -ENOSPC error from
_i915_gem_object_stolen_init.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6565
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220825154239.52343-1-andrzej.hajda@intel.com
|
|
Send DP_SET_POWER_D3 command to the downstream before stopping DP, so the
suspend process will not be interrupted by the HPD interrupt. Also modify
the order in .atomic_enable callback to make the callbacks symmetric.
Fixes: 46ca7da7f1e8 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830045756.1655954-1-treapking@chromium.org
|
|
When removing the module we will get the following warning:
[ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered
[ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
[ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130
[ 31.921825] Call Trace:
[ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw]
[ 31.923139] i2c_device_remove+0x181/0x1f0
The two bridges (stdp2690, stdp4028) do not probe at the same time, so
the driver does not call ge_b850v3_resgiter() when probing, causing the
driver to try to remove the object that has not been initialized.
Fix this by checking whether both the bridges are probed.
Fixes: 11632d4aa2b3 ("drm/bridge: megachips: Ensure both bridges are probed before registration")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830073450.1897020-1-zheyuma97@gmail.com
|
|
Add a helper for getting the DP PHY name. In the interest of caller
simplicity and to avoid allocations and passing in of buffers, duplicate
the const strings to return. It's a minor penalty to pay for simplicity
in all the call sites.
v2: Rebase, add kernel-doc, ensure non-NULL always
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b08dc12a7e621a48ec35546d6cd1ed4b1434810d.1660553850.git.jani.nikula@intel.com
|
|
The indentation of statements in the same curly bracket should be
consistent.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1892
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The indentation of statements in the same curly bracket should be
consistent.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1890
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1891
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The indentation of statements in the same curly bracket should be
consistent.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1886
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. The indentation of statements in the same curly bracket should be
consistent.
2. Variable declarations in the same function should be aligned.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1887
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1888
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1889
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ip block support for lsdma v6_0_3.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ip block support for sdma v6_0_3.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To support new sdma ip block
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Force to enable smu block for SMU v13.0.10
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
added sw pptable id 6666 for smu 13.0.10
v2: fix checkpatch error (Alex)
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add smu_v13_0_10 driver if version
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add smu_v13_0_10 support.
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ip block support for psp v13_0_10.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
added missing firmware module
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add psp v13_0_10 ip block, initialize firmware and
psp functions
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ip block support for soc21_common.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This enable VCN PG, CG, DPG and JPEG PG, CG
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
init cp/pg_flags and extenal_rev_id
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
driver doesn't need to program any gc 11_0_0 golden
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return value from kfd_wait_on_events() and io_remap_pfn_range() directly
instead of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return value from expression directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Incorrect cursor position will induce system hang on pipe split.
[How]
1.Handle horizontal mirror on rotation,
2.Correct cursor set on piep split.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
On secondary display hotplug we switch primary
stream from ODM2to1 to ODMBypass mode. Current
logic will trigger disabling front end for this
stream.
[How]
We need to check if prev_odm_pipe is equal to NULL
in order to disable dangling planes in this scenario.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|