| Age | Commit message (Collapse) | Author |
|---|
|
For TJA11xx PHYs, they have the capability to output 50MHz reference
clock on REF_CLK pin in RMII mode, which is called "revRMII" mode in
the PHY data sheet.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Per the RMII specification, the REF_CLK is sourced from MAC to PHY
or from an external source. But for TJA11xx PHYs, they support to
output a 50MHz RMII reference clock on REF_CLK pin. Previously the
"nxp,rmii-refclk-in" was added to indicate that in RMII mode, if
this property present, REF_CLK is input to the PHY, otherwise it
is output. This seems inappropriate now. Because according to the
RMII specification, the REF_CLK is originally input, so there is
no need to add an additional "nxp,rmii-refclk-in" property to
declare that REF_CLK is input.
Unfortunately, because the "nxp,rmii-refclk-in" property has been
added for a while, and we cannot confirm which DTS use the TJA1100
and TJA1101 PHYs, changing it to switch polarity will cause an ABI
break. But fortunately, this property is only valid for TJA1100 and
TJA1101. For TJA1103/TJA1104/TJA1120/TJA1121 PHYs, this property is
invalid because they use the nxp-c45-tja11xx driver, which is a
different driver from TJA1100/TJA1101. Therefore, for PHYs using
nxp-c45-tja11xx driver, add "nxp,rmii-refclk-out" property to
support outputting RMII reference clock on REF_CLK pin.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 1fd9e4f25782 ("selftests: make kselftest-clean remove libynl outputs")
added EXTRA_CLEAN of YNL generated files to ynl.mk. We already had
a EXTRA_CLEAN in the file including the snippet. Consolidate them.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241011230311.2529760-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Try to rebuild YNL if either user added a new family or the specs
of the families have changed. Stanislav's ncdevmem cause a false
positive build failure in NIPA because libynl.a isn't rebuilt
after ethtool is added to YNL_GENS.
Note that sha1sum is already used in other parts of the build system.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241011230311.2529760-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allows simplifying get_strings and avoids manual pointer manipulation.
Tested on Belkin RT1800.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20241011200225.7403-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allows simplifying get_strings and avoids manual pointer manipulation.
Tested on Turris Omnia.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20241011195955.7065-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Joe Damato says:
====================
Add support for per-NAPI config via netlink
Greetings:
Welcome to v6. Minor changes from v5 [1], please see changelog below.
There were no explicit comments from reviewers on the call outs in my
v5, so I'm retaining them from my previous cover letter just in case :)
A few important call outs for reviewers:
1. This revision seems to work (see below for a full walk through). I
think this is the behavior we talked about, but please let me know if
a use case is missing.
2. Re a previous point made by Stanislav regarding "taking over a NAPI
ID" when the channel count changes: mlx5 seems to call napi_disable
followed by netif_napi_del for the old queues and then calls
napi_enable for the new ones. In this RFC, the NAPI ID generation is
deferred to napi_enable. This means we won't end up with two of the
same NAPI IDs added to the hash at the same time.
Can we assume all drivers will napi_disable the old queues before
napi_enable the new ones?
- If yes: we might not need to worry about a NAPI ID takeover
function.
- If no: I'll need to make a change so that the NAPI ID generation
is deferred only for drivers which have opted into the config
space via calls to netif_napi_add_config
3. I made the decision to remove the WARN_ON_ONCE that (I think?)
Jakub previously suggested in alloc_netdev_mqs (WARN_ON_ONCE(txqs
!= rxqs);) because this was triggering on every kernel boot with my
mlx5 NIC.
4. I left the "maxqs = max(txqs, rxqs);" in alloc_netdev_mqs despite
thinking this is a bit strange. I think it's strange that we might
be short some number of NAPI configs, but it seems like most people
are in favor of this approach, so I've left it.
I'd appreciate thoughts from reviewers on the above items, if at all
possible.
Now, on to the implementation.
Firstly, this implementation moves certain settings to napi_struct so that
they are "per-NAPI", while taking care to respect existing sysfs
parameters which are interface wide and affect all NAPIs:
- NAPI ID
- gro_flush_timeout
- defer_hard_irqs
Furthermore:
- NAPI ID generation and addition to the hash is now deferred to
napi_enable, instead of during netif_napi_add
- NAPIs are removed from the hash during napi_disable, instead of
netif_napi_del.
- An array of "struct napi_config" is allocated in net_device.
IMPORTANT: The above changes affect all network drivers.
Optionally, drivers may opt-in to using their config space by calling
netif_napi_add_config instead of netif_napi_add.
If a driver does this, the NAPI being added is linked with an allocated
"struct napi_config" and the per-NAPI settings (including NAPI ID) are
persisted even as hardware queues are destroyed and recreated.
To help illustrate how this would end up working, I've added patches for
3 drivers, of which I have access to only 1:
- mlx5 which is the basis of the examples below
- mlx4 which has TX only NAPIs, just to highlight that case. I have
only compile tested this patch; I don't have this hardware.
- bnxt which I have only compiled tested. I don't have this
hardware.
NOTE: I only tested this on mlx5; I have no access to the other hardware
for which I provided patches. Hopefully other folks can help test :)
Here's how it works when I test it on my mlx5 system:
$ ethtool -l eth4 | grep Combined | tail -1
Combined: 2
First, output the current NAPI settings:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 344,
'ifindex': 7,
'irq': 327}]
Now, set the global sysfs parameters:
$ sudo bash -c 'echo 20000 >/sys/class/net/eth4/gro_flush_timeout'
$ sudo bash -c 'echo 100 >/sys/class/net/eth4/napi_defer_hard_irqs'
Output current NAPI settings again:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Now set NAPI ID 345, via its NAPI ID to specific values:
$ sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/netdev.yaml \
--do napi-set \
--json='{"id": 345,
"defer-hard-irqs": 111,
"gro-flush-timeout": 11111}'
None
Now output current NAPI settings again to ensure only NAPI ID 345
changed:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 111,
'gro-flush-timeout': 11111,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Now, increase gro-flush-timeout only:
$ sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/netdev.yaml \
--do napi-set --json='{"id": 345,
"gro-flush-timeout": 44444}'
None
Now output the current NAPI settings once more:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 111,
'gro-flush-timeout': 44444,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Now set NAPI ID 345 to have gro_flush_timeout of 0:
$ sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/netdev.yaml \
--do napi-set --json='{"id": 345,
"gro-flush-timeout": 0}'
None
Check that NAPI ID 345 has a value of 0:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 111,
'gro-flush-timeout': 0,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Change the queue count, ensuring that NAPI ID 345 retains its settings:
$ sudo ethtool -L eth4 combined 4
Check that the new queues have the system wide settings but that NAPI ID
345 remains unchanged:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 347,
'ifindex': 7,
'irq': 529},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 346,
'ifindex': 7,
'irq': 528},
{'defer-hard-irqs': 111,
'gro-flush-timeout': 0,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Now reduce the queue count below where NAPI ID 345 is indexed:
$ sudo ethtool -L eth4 combined 1
Check the output:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Re-increase the queue count to ensure NAPI ID 345 is re-assigned the same
values:
$ sudo ethtool -L eth4 combined 2
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[{'defer-hard-irqs': 111,
'gro-flush-timeout': 0,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Create new queues to ensure the sysfs globals are used for the new NAPIs
but that NAPI ID 345 is unchanged:
$ sudo ethtool -L eth4 combined 8
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[...]
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 346,
'ifindex': 7,
'irq': 528},
{'defer-hard-irqs': 111,
'gro-flush-timeout': 0,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 100,
'gro-flush-timeout': 20000,
'id': 344,
'ifindex': 7,
'irq': 327}]
Last, but not least, let's try writing the sysfs parameters to ensure
all NAPIs are rewritten:
$ sudo bash -c 'echo 33333 >/sys/class/net/eth4/gro_flush_timeout'
$ sudo bash -c 'echo 222 >/sys/class/net/eth4/napi_defer_hard_irqs'
Check that worked:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 7}'
[...]
{'defer-hard-irqs': 222,
'gro-flush-timeout': 33333,
'id': 346,
'ifindex': 7,
'irq': 528},
{'defer-hard-irqs': 222,
'gro-flush-timeout': 33333,
'id': 345,
'ifindex': 7,
'irq': 527},
{'defer-hard-irqs': 222,
'gro-flush-timeout': 33333,
'id': 344,
'ifindex': 7,
'irq': 327}]
[1]: https://lore.kernel.org/20241009005525.13651-1-jdamato@fastly.com
v5: https://lore.kernel.org/20241009005525.13651-1-jdamato@fastly.com
rfcv4: https://lore.kernel.org/lkml/20241001235302.57609-1-jdamato@fastly.com
rfcv3: https://lore.kernel.org/20240912100738.16567-8-jdamato@fastly.com
rfcv2: https://lore.kernel.org/20240908160702.56618-1-jdamato@fastly.com
====================
Link: https://patch.msgid.link/20241011184527.16393-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use netif_napi_add_config to assign persistent per-NAPI config when
initializing RX CQ NAPIs.
Presently, struct napi_config only has support for two fields used for
RX, so there is no need to support them with TX CQs, yet.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-10-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use netif_napi_add_config to assign persistent per-NAPI config when
initializing NAPIs.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-9-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use netif_napi_add_config to assign persistent per-NAPI config when
initializing NAPIs.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-8-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to set per-NAPI defer_hard_irqs and gro_flush_timeout.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-7-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a persistent NAPI config area for NAPI configuration to the core.
Drivers opt-in to setting the persistent config for a NAPI by passing an
index when calling netif_napi_add_config.
napi_config is allocated in alloc_netdev_mqs, freed in free_netdev
(after the NAPIs are deleted).
Drivers which call netif_napi_add_config will have persistent per-NAPI
settings: NAPI IDs, gro_flush_timeout, and defer_hard_irq settings.
Per-NAPI settings are saved in napi_disable and restored in napi_enable.
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-6-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support dumping gro_flush_timeout for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-5-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow per-NAPI gro_flush_timeout setting.
The existing sysfs parameter is respected; writes to sysfs will write to
all NAPI structs for the device and the net_device gro_flush_timeout
field. Reads from sysfs will read from the net_device field.
The ability to set gro_flush_timeout on specific NAPI instances will be
added in a later commit, via netdev-genl.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support dumping defer_hard_irqs for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add defer_hard_irqs to napi_struct in preparation for per-NAPI
settings.
The existing sysfs parameter is respected; writes to sysfs will write to
all NAPI structs for the device and the net_device defer_hard_irq field.
Reads from sysfs show the net_device field.
The ability to set defer_hard_irqs on specific NAPI instances will be
added in a later commit, via netdev-genl.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PHYs performing rate-matching using MAC-side flow-control always
perform duplex-matching as well in case they are supporting
half-duplex modes at all.
No longer remove half-duplex modes from their capabilities.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/b157c0c289cfba024039a96e635d037f9d946745.1728617993.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
tcp: add skb->sk to more control packets
Currently, TCP can set skb->sk for a variety of transmit packets.
However, packets sent on behalf of a TIME_WAIT sockets do not
have an attached socket.
Same issue for RST packets.
We want to change this, in order to increase eBPF program
capabilities.
This is slightly risky, because various layers could
be confused by TIME_WAIT sockets showing up in skb->sk.
v2: audited all sk_to_full_sk() users and addressed Martin feedback.
====================
Link: https://patch.msgid.link/20241010174817.1543642-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip_send_unicast_reply() send orphaned 'control packets'.
These are RST packets and also ACK packets sent from TIME_WAIT.
Some eBPF programs would prefer to have a meaningful skb->sk
pointer as much as possible.
This means that TCP can now attach TIME_WAIT sockets to outgoing
skbs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_v6_send_response() send orphaned 'control packets'.
These are RST packets and also ACK packets sent from TIME_WAIT.
Some eBPF programs would prefer to have a meaningful skb->sk
pointer as much as possible.
This means that TCP can now attach TIME_WAIT sockets to outgoing
skbs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This can be used to attach a socket to an skb,
taking a reference on sk->sk_refcnt.
This helper might be a NOP if sk->sk_refcnt is zero.
Use it from tcp_make_synack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP stack is not attaching skb to TIME_WAIT sockets yet,
but we would like to allow this in the future.
Add sk_listener_or_tw() helper to detect the three states
that FQ needs to take care.
Like NEW_SYN_RECV, TIME_WAIT are not full sockets and
do not contain sk->sk_pacing_status, sk->sk_pacing_rate.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP will soon attach TIME_WAIT sockets to some ACK and RST.
Make sure sk_to_full_sk() detects this and does not return
a non full socket.
v3: also changed sk_const_to_full_sk()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Address byte-order miss-matches flagged by Sparse.
In tg3_load_firmware_cpu() and tg3_get_device_address()
this is done using appropriate types to store big endian values.
In the cases of tg3_test_nvram(), where buf is an array which
contains values of several different types, cast to __le32
before converting values to host byte order.
Reported by Sparse as:
.../tg3.c:3745:34: warning: cast to restricted __be32
.../tg3.c:13096:21: warning: cast to restricted __le32
.../tg3.c:13096:21: warning: cast from restricted __be32
.../tg3.c:13101:21: warning: cast to restricted __le32
.../tg3.c:13101:21: warning: cast from restricted __be32
.../tg3.c:17070:63: warning: incorrect type in argument 3 (different base types)
.../tg3.c:17070:63: expected restricted __be32 [usertype] *val
.../tg3.c:17070:63: got unsigned int *
dr.../tg3.c:17071:63: warning: incorrect type in argument 3 (different base types)
.../tg3.c:17071:63: expected restricted __be32 [usertype] *val
.../tg3.c:17071:63: got unsigned int *
Also, address white-space issues on lines modified for the above.
And, for consistency, lines adjacent to them.
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-tg3-sparse-v1-1-6af38a7bf4ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon Horman says:
====================
net: ethernet: ti: Address some warnings
This patchset addresses some warnings flagged by Sparse, and clang-18 in
TI Ethernet drivers.
Although these changes do not alter the functionality of the code, by
addressing them real problems introduced in future which are flagged by
tooling will stand out more readily.
Compile tested only.
---
Changes in v2:
- Dropped patch to directly address __percpu Sparse warnings and, instead
- Add patch to use tstats
- Added tags
- Thanks to all for the review of v1
- Link to v1: https://lore.kernel.org/r/20240910-ti-warn-v1-0-afd1e404abbe@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
W=1 builds flag that some accessor functions for ALE fields are unused.
Address this by splitting up the macros used to define these
accessors to allow only those that are used to be declared.
The warnings are verbose, but for example, the mcast_state case is
flagged by clang-18 as:
.../cpsw_ale.c:220:1: warning: unused function 'cpsw_ale_get_mcast_state' [-Wunused-function]
220 | DEFINE_ALE_FIELD(mcast_state, 62, 2)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../cpsw_ale.c:145:19: note: expanded from macro 'DEFINE_ALE_FIELD'
145 | static inline int cpsw_ale_get_##name(u32 *ale_entry) \
| ^~~~~~~~~~~~~~~~~~~
<scratch space>:196:1: note: expanded from here
196 | cpsw_ale_get_mcast_state
| ^~~~~~~~~~~~~~~~~~~~~~~~
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of struct pcpu_sw_netstats and related helpers to handle
existing per-cpu stats for this driver - the exact same counters
are maintained.
A side effect of this change is to address __percpu warnings
flagged by Sparse:
.../am65-cpsw-nuss.c:2658:55: warning: incorrect type in initializer (different address spaces)
.../am65-cpsw-nuss.c:2658:55: expected struct am65_cpsw_ndev_stats [noderef] __percpu *stats
.../am65-cpsw-nuss.c:2658:55: got void *data
.../am65-cpsw-nuss.c:2781:15: warning: incorrect type in argument 3 (different address spaces)
.../am65-cpsw-nuss.c:2781:15: expected void *data
.../am65-cpsw-nuss.c:2781:15: got struct am65_cpsw_ndev_stats [noderef] __percpu *stats
Compile tested only.
No functional change intended.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/all/20240911170643.7ecb1bbb@kernel.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The id_temp local variable in am65_cpsw_nuss_probe() is
used to hold a 64-bit big-endian value as it is assigned using
cpu_to_be64().
It is read using memcpy(), where it is written as an identifier into a
byte-array. So this can also be treated as big endian.
As it's type is currently host byte order (u64), sparse flags
an endian mismatch when compiling for little-endian systems:
.../am65-cpsw-nuss.c:3454:17: warning: incorrect type in assignment (different base types)
.../am65-cpsw-nuss.c:3454:17: expected unsigned long long [usertype] id_temp
.../am65-cpsw-nuss.c:3454:17: got restricted __be64 [usertype]
Address this by using __be64 as the type of id_temp.
No functional change intended.
Compile tested only.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due to problem reports in the past SG and TSO/TSO6 are disabled per
default. It's not fully clear which chip versions are affected, so we
may impact also users of unaffected chip versions, unless they know
how to use ethtool for enabling SG/TSO/TSO6.
Vendor drivers r8168/r8125 enable SG/TSO/TSO6 for selected chip
versions per default, I'd interpret this as confirmation that these
chip versions are unaffected. So let's do the same here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
del_timer() and del_timer_sync() have been renamed to timer_delete()
and timer_delete_sync().
Inconsistent API usage makes the code a bit confusing, so replace with
the new APIs.
No functional changes intended.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Danielle Ratson says:
====================
ethtool: Add support for writing firmware
In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.
EPL payloads are used for more complex and extensive management functions
that require a larger amount of data, so writing firmware blocks using EPL
is much more efficient.
Currently, only LPL payload is supported for writing firmware blocks to
the module.
Add support for writing firmware block using EPL payload, both to support
modules that support only EPL write mechanism, and to optimize the flashing
process of modules that support LPL and EPL.
Running the flashing command on the same sample module using EPL vs. LPL
showed an improvement of 84%.
Patchset overview:
Patch #1: preparations
Patch #2: Add EPL support
v5: Resending- no changes.
v4: Resending the right version after wrong v3.
No changes from v2.
v2:
* Fix the commit meassges to align the cover letter about the
right meaning of LPL and EPL.
Patch #2:
* Initialize the variable 'bytes_written' before the first
iteration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.
EPL payloads are used for more complex and extensive management
functions that require a larger amount of data, so writing firmware
blocks using EPL is much more efficient.
Currently, only LPL payload is supported for writing firmware blocks to
the module.
Add support for writing firmware block using EPL payload, both to
support modules that supports only EPL write mechanism, and to optimize
the flashing process of modules that support LPL and EPL.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.
EPL payloads are used for more complex and extensive management
functions that require a larger amount of data, so writing firmware
blocks using EPL is much more efficient.
Currently, only LPL payload is supported for writing firmware blocks to
the module.
Add EPL related parameters to the function ethtool_cmis_cdb_compose_args()
and add a specific function for calculating the maximum allowable length
extension for EPL. Both will be used in the next patch to add support for
writing firmware blocks using EPL.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Menglong Dong says:
====================
net: vxlan: add skb drop reasons support
In this series, we add skb drop reasons support to VXLAN, and following
new skb drop reasons are introduced:
SKB_DROP_REASON_VXLAN_INVALID_HDR
SKB_DROP_REASON_VXLAN_VNI_NOT_FOUND
SKB_DROP_REASON_VXLAN_ENTRY_EXISTS
SKB_DROP_REASON_VXLAN_NO_REMOTE
SKB_DROP_REASON_MAC_INVALID_SOURCE
SKB_DROP_REASON_IP_TUNNEL_ECN
SKB_DROP_REASON_TUNNEL_TXINFO
SKB_DROP_REASON_LOCAL_MAC
We add some helper functions in this series, who will capture the drop
reasons from pskb_may_pull_reason and return them:
pskb_network_may_pull_reason()
pskb_inet_may_pull_reason()
And we also make the following functions return skb drop reasons:
skb_vlan_inet_prepare()
vxlan_remcsum()
vxlan_snoop()
vxlan_set_mac()
Changes since v6:
- fix some typos in the document for SKB_DROP_REASON_TUNNEL_TXINFO
Changes since v5:
- fix some typos in the document for SKB_DROP_REASON_TUNNEL_TXINFO
Changes since v4:
- make skb_vlan_inet_prepare() return drop reasons, instead of introduce
a wrapper for it in the 3rd patch.
- modify the document for SKB_DROP_REASON_LOCAL_MAC and
SKB_DROP_REASON_TUNNEL_TXINFO.
Changes since v3:
- rename SKB_DROP_REASON_VXLAN_INVALID_SMAC to
SKB_DROP_REASON_MAC_INVALID_SOURCE in the 6th patch
Changes since v2:
- move all the drop reasons of VXLAN to the "core", instead of introducing
the VXLAN drop reason subsystem
- add the 6th patch, which capture the drop reasons from vxlan_snoop()
- move the commits for vxlan_remcsum() and vxlan_set_mac() after
vxlan_rcv() to update the call of them accordingly
- fix some format problems
Changes since v1:
- document all the drop reasons that we introduce
- rename the drop reasons to make them more descriptive, as Ido advised
- remove the 2nd patch, which introduce the SKB_DR_RESET
- add the 4th patch, which adds skb_vlan_inet_prepare_reason() helper
- introduce the 6th patch, which make vxlan_set_mac return drop reasons
- introduce the 10th patch, which uses VXLAN_DROP_NO_REMOTE as the drop
reasons, as Ido advised
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() with kfree_skb_reason() in encap_bypass_if_local, and
no new skb drop reason is added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb with kfree_skb_reason in vxlan_encap_bypass, and no new
skb drop reason is added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() with kfree_skb_reason() in vxlan_mdb_xmit. No drop
reasons are introduced in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb/dev_kfree_skb with kfree_skb_reason in vxlan_xmit_one.
No drop reasons are introduced in this commit.
The only concern of mine is replacing dev_kfree_skb with
kfree_skb_reason. The dev_kfree_skb is equal to consume_skb, and I'm not
sure if we can change it to kfree_skb here. In my option, the skb is
"dropped" here, isn't it?
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() with kfree_skb_reason() in vxlan_xmit(). Following
new skb drop reasons are introduced for vxlan:
/* no remote found for xmit */
SKB_DROP_REASON_VXLAN_NO_REMOTE
/* packet without necessary metadata reached a device which is
* in "external" mode
*/
SKB_DROP_REASON_TUNNEL_TXINFO
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the return type of vxlan_set_mac() from bool to enum
skb_drop_reason. In this commit, the drop reason
"SKB_DROP_REASON_LOCAL_MAC" is introduced for the case that the source
mac of the packet is a local mac.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the return type of vxlan_snoop() from bool to enum
skb_drop_reason. In this commit, two drop reasons are introduced:
SKB_DROP_REASON_MAC_INVALID_SOURCE
SKB_DROP_REASON_VXLAN_ENTRY_EXISTS
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make vxlan_remcsum() support skb drop reasons by changing the return
value type of it from bool to enum skb_drop_reason.
The only drop reason in vxlan_remcsum() comes from pskb_may_pull_reason(),
so we just return it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce skb drop reasons to the function vxlan_rcv(). Following new
drop reasons are added:
SKB_DROP_REASON_VXLAN_INVALID_HDR
SKB_DROP_REASON_VXLAN_VNI_NOT_FOUND
SKB_DROP_REASON_IP_TUNNEL_ECN
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make skb_vlan_inet_prepare return the skb drop reasons, which is just
what pskb_may_pull_reason() returns. Meanwhile, adjust all the call of
it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the function pskb_inet_may_pull_reason() and make
pskb_inet_may_pull a simple inline call to it. The drop reasons of it just
come from pskb_may_pull_reason().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the function pskb_network_may_pull_reason() and make
pskb_network_may_pull() a simple inline call to it. The drop reasons of
it just come from pskb_may_pull_reason.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add skb_tx_timestamp() call and enable support for SW
timestamping.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241010221506.802730-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MII driver isn't used by brcmstb Ethernet drivers. Remove it
from the BCMASP, GENET, and SYSTEMPORT drivers.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241010191332.1074642-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Parthiban Veerasooran says:
====================
microchip_t1s: Update on Microchip 10BASE-T1S PHY driver
This patch series contain the below updates:
- Restructured lan865x_write_cfg_params() and lan865x_read_cfg_params()
functions arguments to more generic.
- Updated new/improved initial settings of LAN865X Rev.B0 from latest
AN1760.
- Added support for LAN865X Rev.B1 from latest AN1760.
- Moved LAN867X reset handling to a new function for flexibility.
- Added support for LAN867X Rev.C1/C2 from latest AN1699.
- Disabled/enabled collision detection based on PLCA setting.
====================
Link: https://patch.msgid.link/20241010082205.221493-1-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As per LAN8650/1 Rev.B0/B1 AN1760 (Revision F (DS60001760G - June 2024))
and LAN8670/1/2 Rev.C1/C2 AN1699 (Revision E (DS60001699F - June 2024)),
under normal operation, the device should be operated in PLCA mode.
Disabling collision detection is recommended to allow the device to
operate in noisy environments or when reflections and other inherent
transmission line distortion cause poor signal quality. Collision
detection must be re-enabled if the device is configured to operate in
CSMA/CD mode.
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20241010082205.221493-8-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
