summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-05ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using ↵Stefan Binding
CS35L41 HDA Add support for ASUS B3405CCA / P3405CCA, B3605CCA / P3605CCA, B3405CCA, B3605CCA. Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250305170714.755794-6-sbinding@opensource.cirrus.com
2025-03-05ALSA: hda/realtek: Add support for various ASUS Laptops using CS35L41 HDAStefan Binding
Add support for ASUS B3405CVA, B5405CVA, B5605CVA, B3605CVA. Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250305170714.755794-5-sbinding@opensource.cirrus.com
2025-03-05ALSA: hda/realtek: Add support for ASUS ROG Strix G614 Laptops using CS35L41 HDAStefan Binding
Add support for ASUS G614PH/PM/PP and G614FH/FM/FP. Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250305170714.755794-4-sbinding@opensource.cirrus.com
2025-03-05ALSA: hda/realtek: Add support for ASUS ROG Strix GA603 Laptops using ↵Stefan Binding
CS35L41 HDA Add support for ASUS GA603KP, GA603KM and GA603KH. Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250305170714.755794-3-sbinding@opensource.cirrus.com
2025-03-05ALSA: hda/realtek: Add support for ASUS ROG Strix G814 Laptop using CS35L41 HDAStefan Binding
Add support for ASUS G814PH/PM/PP and G814FH/FM/FP. Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250305170714.755794-2-sbinding@opensource.cirrus.com
2025-03-05nvme-tcp: fix signedness bug in nvme_tcp_init_connection()Dan Carpenter
The kernel_recvmsg() function returns an int which could be either negative error codes or the number of bytes received. The problem is that the condition: if (ret < sizeof(*icresp)) { is type promoted to type unsigned long and negative values are treated as high positive values which is success, when they should be treated as failure. Handle invalid positive returns separately from negative error codes to avoid this problem. Fixes: 578539e09690 ("nvme-tcp: fix connect failure on receiving partial ICResp PDU") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-03-05Merge tag 'hid-for-linus-2025030501' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - power management fix in intel-thc-hid (Even Xu) - nintendo gencon mapping fix (Ryan McClelland) - fix for UAF on device diconnect path in hid-steam (Vicki Pfau) - two fixes for UAF on device disconnect path in intel-ish-hid (Zhang Lixu) - fix for potential NULL dereference in hid-appleir (Daniil Dulov) - few other small cosmetic fixes (e.g. typos) * tag 'hid-for-linus-2025030501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: Intel-thc-hid: Intel-quickspi: Correct device state after S4 HID: intel-thc-hid: Fix spelling mistake "intput" -> "input" HID: hid-steam: Fix use-after-free when detaching device HID: debug: Fix spelling mistake "Messanger" -> "Messenger" HID: appleir: Fix potential NULL dereference at raw event handle HID: apple: disable Fn key handling on the Omoton KB066 HID: i2c-hid: improve i2c_hid_get_report error message HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove() HID: intel-ish-hid: Fix use-after-free issue in hid_ishtp_cl_remove() HID: google: fix unused variable warning under !CONFIG_ACPI HID: nintendo: fix gencon button events map HID: corsair-void: Update power supply values with a unified work handler
2025-03-05fs/pipe: remove buggy and unused 'helper' functionLinus Torvalds
While looking for incorrect users of the pipe head/tail fields (see commit c27c66afc449: "fs/pipe: Fix pipe_occupancy() with 16-bit indexes"), I found a bug in pipe_discard_from() that looked entirely broken. However, the fix is trivial: this buggy function isn't actually called by anything, so let's just remove it ASAP. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-03-05drm/amd/pm: always allow ih interrupt from fwKenneth Feng
always allow ih interrupt from fw on smu v14 based on the interface requirement Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a3199eba46c54324193607d9114a1e321292d7a1) Cc: stable@vger.kernel.org # 6.12.x
2025-03-05drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200MRichard Thier
num_gb_pipes was set to a wrong value using r420_pipe_config This have lead to HyperZ glitches on fast Z clearing. Closes: https://bugs.freedesktop.org/show_bug.cgi?id=110897 Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Richard Thier <u9vata@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 044e59a85c4d84e3c8d004c486e5c479640563a6) Cc: stable@vger.kernel.org
2025-03-05include/linux/pipe_fs_i: Add htmldoc annotation for "head_tail" memberK Prateek Nayak
Add htmldoc annotation for the newly introduced "head_tail" member describing it to be a union of the pipe_inode_info's @head and @tail members. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/lkml/20250305204609.5e64768e@canb.auug.org.au/ Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex") Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-03-05fs/pipe: Fix pipe_occupancy() with 16-bit indexesLinus Torvalds
The pipe_occupancy() logic implicitly relied on the natural unsigned modulo arithmetic in C, but that doesn't work for the new 'pipe_index_t' case, since any arithmetic will be done in 'int' (and here we had also made it 'unsigned int' due to the function call boundary). So make the modulo arithmetic explicit by casting the result to the proper type. Cc: Oleg Nesterov <oleg@redhat.com> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Swapnil Sapkal <swapnil.sapkal@amd.com> Cc: Alexey Gladkov <legion@kernel.org> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/all/CAHk-=wjyHsGLx=rxg6PKYBNkPYAejgo7=CbyL3=HGLZLsAaJFQ@mail.gmail.com/ Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-03-05drm/amdkfd: Fix NULL Pointer Dereference in KFD queueAndrew Martin
Through KFD IOCTL Fuzzing we encountered a NULL pointer derefrence when calling kfd_queue_acquire_buffers. Fixes: 629568d25fea ("drm/amdkfd: Validate queue cwsr area and eop buffer size") Signed-off-by: Andrew Martin <Andrew.Martin@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Andrew Martin <Andrew.Martin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 049e5bf3c8406f87c3d8e1958e0a16804fa1d530) Cc: stable@vger.kernel.org
2025-03-05drm/amd/display: Fix null check for pipe_ctx->plane_state in ↵Ma Ke
resource_build_scaling_params Null pointer dereference issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not null before accessing. This prevents a null pointer dereference. Found by code review. Fixes: 3be5262e353b ("drm/amd/display: Rename more dc_surface stuff to plane_state") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092) Cc: stable@vger.kernel.org
2025-03-05sched/fair: Fix potential memory corruption in child_cfs_rq_on_listZecheng Li
child_cfs_rq_on_list attempts to convert a 'prev' pointer to a cfs_rq. This 'prev' pointer can originate from struct rq's leaf_cfs_rq_list, making the conversion invalid and potentially leading to memory corruption. Depending on the relative positions of leaf_cfs_rq_list and the task group (tg) pointer within the struct, this can cause a memory fault or access garbage data. The issue arises in list_add_leaf_cfs_rq, where both cfs_rq->leaf_cfs_rq_list and rq->leaf_cfs_rq_list are added to the same leaf list. Also, rq->tmp_alone_branch can be set to rq->leaf_cfs_rq_list. This adds a check `if (prev == &rq->leaf_cfs_rq_list)` after the main conditional in child_cfs_rq_on_list. This ensures that the container_of operation will convert a correct cfs_rq struct. This check is sufficient because only cfs_rqs on the same CPU are added to the list, so verifying the 'prev' pointer against the current rq's list head is enough. Fixes a potential memory corruption issue that due to current struct layout might not be manifesting as a crash but could lead to unpredictable behavior when the layout changes. Fixes: fdaba61ef8a2 ("sched/fair: Ensure that the CFS parent is added after unthrottling") Signed-off-by: Zecheng Li <zecheng@google.com> Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20250304214031.2882646-1-zecheng@google.com
2025-03-05block: fix conversion of GPT partition name to 7-bitOlivier Gayot
The utf16_le_to_7bit function claims to, naively, convert a UTF-16 string to a 7-bit ASCII string. By naively, we mean that it: * drops the first byte of every character in the original UTF-16 string * checks if all characters are printable, and otherwise replaces them by exclamation mark "!". This means that theoretically, all characters outside the 7-bit ASCII range should be replaced by another character. Examples: * lower-case alpha (ɒ) 0x0252 becomes 0x52 (R) * ligature OE (œ) 0x0153 becomes 0x53 (S) * hangul letter pieup (ㅂ) 0x3142 becomes 0x42 (B) * upper-case gamma (Ɣ) 0x0194 becomes 0x94 (not printable) so gets replaced by "!" The result of this conversion for the GPT partition name is passed to user-space as PARTNAME via udev, which is confusing and feels questionable. However, there is a flaw in the conversion function itself. By dropping one byte of each character and using isprint() to check if the remaining byte corresponds to a printable character, we do not actually guarantee that the resulting character is 7-bit ASCII. This happens because we pass 8-bit characters to isprint(), which in the kernel returns 1 for many values > 0x7f - as defined in ctype.c. This results in many values which should be replaced by "!" to be kept as-is, despite not being valid 7-bit ASCII. Examples: * e with acute accent (é) 0x00E9 becomes 0xE9 - kept as-is because isprint(0xE9) returns 1. * euro sign (€) 0x20AC becomes 0xAC - kept as-is because isprint(0xAC) returns 1. This way has broken pyudev utility[1], fixes it by using a mask of 7 bits instead of 8 bits before calling isprint. Link: https://github.com/pyudev/pyudev/issues/490#issuecomment-2685794648 [1] Link: https://lore.kernel.org/linux-block/4cac90c2-e414-4ebb-ae62-2a4589d9dc6e@canonical.com/ Cc: Mulhern <amulhern@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: stable@vger.kernel.org Signed-off-by: Olivier Gayot <olivier.gayot@canonical.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250305022154.3903128-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-05ublk: set_params: properly check if parameters can be appliedUday Shankar
The parameters set by the set_params call are only applied to the block device in the start_dev call. So if a device has already been started, a subsequently issued set_params on that device will not have the desired effect, and should return an error. There is an existing check for this - set_params fails on devices in the LIVE state. But this check is not sufficient to cover the recovery case. In this case, the device will be in the QUIESCED or FAIL_IO states, so set_params will succeed. But this success is misleading, because the parameters will not be applied, since the device has already been started (by a previous ublk server). The bit UB_STATE_USED is set on completion of the start_dev; use it to detect and fail set_params commands which arrive too late to be applied (after start_dev). Signed-off-by: Uday Shankar <ushankar@purestorage.com> Fixes: 0aa73170eba5 ("ublk_drv: add SET_PARAMS/GET_PARAMS control command") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250304-set_params-v1-1-17b5e0887606@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-05net-timestamp: support TCP GSO case for a few missing flagsJason Xing
When I read through the TSO codes, I found out that we probably miss initializing the tx_flags of last seg when TSO is turned off, which means at the following points no more timestamp (for this last one) will be generated. There are three flags to be handled in this patch: 1. SKBTX_HW_TSTAMP 2. SKBTX_BPF 3. SKBTX_SCHED_TSTAMP Note that SKBTX_BPF[1] was added in 6.14.0-rc2 by commit 6b98ec7e882af ("bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback") and only belongs to net-next branch material for now. The common issue of the above three flags can be fixed by this single patch. This patch initializes the tx_flags to SKBTX_ANY_TSTAMP like what the UDP GSO does to make the newly segmented last skb inherit the tx_flags so that requested timestamp will be generated in each certain layer, or else that last one has zero value of tx_flags which leads to no timestamp at all. Fixes: 4ed2d765dfacc ("net-timestamp: TCP timestamping") Signed-off-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-05exfat: add a check for invalid data sizeYuezhang Mo
Add a check for invalid data size to avoid corrupted filesystem from being further corrupted. Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
2025-03-05exfat: short-circuit zero-byte writes in exfat_file_write_iterEric Sandeen
When generic_write_checks() returns zero, it means that iov_iter_count() is zero, and there is no work to do. Simply return success like all other filesystems do, rather than proceeding down the write path, which today yields an -EFAULT in generic_perform_write() via the (fault_in_iov_iter_readable(i, bytes) == bytes) check when bytes == 0. Fixes: 11a347fb6cef ("exfat: change to get file size from DataLength") Reported-by: Noah <kernel-org-10@maxgrass.eu> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
2025-03-05exfat: fix soft lockup in exfat_clear_bitmapNamjae Jeon
bitmap clear loop will take long time in __exfat_free_cluster() if data size of file/dir enty is invalid. If cluster bit in bitmap is already clear, stop clearing bitmap go to out of loop. Fixes: 31023864e67a ("exfat: add fat entry operations") Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn> Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
2025-03-05exfat: fix just enough dentries but allocate a new cluster to dirYuezhang Mo
This commit fixes the condition for allocating cluster to parent directory to avoid allocating new cluster to parent directory when there are just enough empty directory entries at the end of the parent directory. Fixes: af02c72d0b62 ("exfat: convert exfat_find_empty_entry() to use dentry cache") Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
2025-03-05gpio: rcar: Use raw_spinlock to protect register accessNiklas Söderlund
Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20 Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-03-05gpio: aggregator: protect driver attr handlers against module unloadKoichiro Den
Both new_device_store and delete_device_store touch module global resources (e.g. gpio_aggregator_lock). To prevent race conditions with module unload, a reference needs to be held. Add try_module_get() in these handlers. For new_device_store, this eliminates what appears to be the most dangerous scenario: if an id is allocated from gpio_aggregator_idr but platform_device_register has not yet been called or completed, a concurrent module unload could fail to unregister/delete the device, leaving behind a dangling platform device/GPIO forwarder. This can result in various issues. The following simple reproducer demonstrates these problems: #!/bin/bash while :; do # note: whether 'gpiochip0 0' exists or not does not matter. echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device done & while :; do modprobe gpio-aggregator modprobe -r gpio-aggregator done & wait Starting with the following warning, several kinds of warnings will appear and the system may become unstable: ------------[ cut here ]------------ list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100) WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120 [...] RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120 [...] Call Trace: <TASK> ? __list_del_entry_valid_or_report+0xa3/0x120 ? __warn.cold+0x93/0xf2 ? __list_del_entry_valid_or_report+0xa3/0x120 ? report_bug+0xe6/0x170 ? __irq_work_queue_local+0x39/0xe0 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? __list_del_entry_valid_or_report+0xa3/0x120 gpiod_remove_lookup_table+0x22/0x60 new_device_store+0x315/0x350 [gpio_aggregator] kernfs_fop_write_iter+0x137/0x1f0 vfs_write+0x262/0x430 ksys_write+0x60/0xd0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> ---[ end trace 0000000000000000 ]--- Fixes: 828546e24280 ("gpio: Add GPIO Aggregator") Cc: stable@vger.kernel.org Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250224143134.3024598-2-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-03-05platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TAShyam Sundar S K
The PMF driver allocates a shared memory buffer using tee_shm_alloc_kernel_buf() for communication with the PMF-TA. The latest PMF-TA version introduces new structures with OEM debug information and additional policy input conditions for evaluating the policy binary. Consequently, the shared memory size must be increased to ensure compatibility between the PMF driver and the updated PMF-TA. To do so, introduce the new PMF-TA UUID and update the PMF shared memory configuration to ensure compatibility with the latest PMF-TA version. Additionally, export the TA UUID. These updates will result in modifications to the prototypes of amd_pmf_tee_init() and amd_pmf_ta_open_session(). Link: https://lore.kernel.org/all/55ac865f-b1c7-fa81-51c4-d211c7963e7e@linux.intel.com/ Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20250305045842.4117767-2-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-05platform/x86/amd/pmf: Propagate PMF-TA return codesShyam Sundar S K
In the amd_pmf_invoke_cmd_init() function within the PMF driver ensure that the actual result from the PMF-TA is returned rather than a generic EIO. This change allows for proper handling of errors originating from the PMF-TA. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20250305045842.4117767-1-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-05doc: correcting two prefix errors in idmappings.rstAiden Ma
Add the 'k' prefix to id 21000. And id `u1000` in the third idmapping should be mapped to `k31000`, not `u31000`. Signed-off-by: Aiden Ma <jiaheng.ma@foxmail.com> Link: https://lore.kernel.org/r/tencent_4E7B1F143E8051530C21FCADF4E014DCBB06@qq.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-03-05ALSA: hda: intel: Add Dell ALC3271 to power_save denylistHoku Ishibe
Dell XPS 13 7390 with the Realtek ALC3271 codec experiences persistent humming noise when the power_save mode is enabled. This issue occurs when the codec enters power saving mode, leading to unwanted noise from the speakers. This patch adds the affected model (PCI ID 0x1028:0x0962) to the power_save denylist to ensure power_save is disabled by default, preventing power-off related noise issues. Steps to Reproduce 1. Boot the system with `snd_hda_intel` loaded. 2. Verify that `power_save` mode is enabled: ```sh cat /sys/module/snd_hda_intel/parameters/power_save ```` output: 10 (default power save timeout) 3. Wait for the power save timeout 4. Observe a persistent humming noise from the speakers 5. Disable `power_save` manually: ```sh echo 0 | sudo tee /sys/module/snd_hda_intel/parameters/power_save ```` 6. Confirm that the noise disappears immediately. This issue has been observed on my system, and this patch successfully eliminates the unwanted noise. If other users experience similar issues, additional reports would be helpful. Signed-off-by: Hoku Ishibe <me@hokuishi.be> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20250224020517.51035-1-me@hokuishi.be Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-03-05ALSA: hda/realtek: update ALC222 depop optimizeKailang Yang
Add ALC222 its own depop functions for alc_init and alc_shutup. [note: this fixes pop noise issues on the models with two headphone jacks -- tiwai ] Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-03-05x86/sgx: Fix size overflows in sgx_encl_create()Jarkko Sakkinen
The total size calculated for EPC can overflow u64 given the added up page for SECS. Further, the total size calculated for shmem can overflow even when the EPC size stays within limits of u64, given that it adds the extra space for 128 byte PCMD structures (one for each page). Address this by pre-evaluating the micro-architectural requirement of SGX: the address space size must be power of two. This is eventually checked up by ECREATE but the pre-check has the additional benefit of making sure that there is some space for additional data. Fixes: 888d24911787 ("x86/sgx: Add SGX_IOC_ENCLAVE_CREATE") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lore.kernel.org/r/20250305050006.43896-1-jarkko@kernel.org Closes: https://lore.kernel.org/linux-sgx/c87e01a0-e7dd-4749-a348-0980d3444f04@stanley.mountain/
2025-03-04Merge tag 'x86_microcode_for_v6.14_rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull AMD microcode loading fixes from Borislav Petkov: - Load only sha256-signed microcode patch blobs - Other good cleanups * tag 'x86_microcode_for_v6.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/AMD: Load only SHA256-checksummed patches x86/microcode/AMD: Add get_patch_level() x86/microcode/AMD: Get rid of the _load_microcode_amd() forward declaration x86/microcode/AMD: Merge early_apply_microcode() into its single callsite x86/microcode/AMD: Remove unused save_microcode_in_initrd_amd() declarations x86/microcode/AMD: Remove ugly linebreak in __verify_patch_section() signature
2025-03-04vlan: enforce underlying device typeOscar Maes
Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization. Fixes: 22bedad3ce11 ("net: convert multicast list to list_head") Reported-by: syzbot+91161fe81857b396c8a0@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000ca9a81061a01ec20@google.com/ Signed-off-by: Oscar Maes <oscmaes92@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20250303155619.8918-1-oscmaes92@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addrKrister Johansen
If multiple connection requests attempt to create an implicit mptcp endpoint in parallel, more than one caller may end up in mptcp_pm_nl_append_new_local_addr because none found the address in local_addr_list during their call to mptcp_pm_nl_get_local_id. In this case, the concurrent new_local_addr calls may delete the address entry created by the previous caller. These deletes use synchronize_rcu, but this is not permitted in some of the contexts where this function may be called. During packet recv, the caller may be in a rcu read critical section and have preemption disabled. An example stack: BUG: scheduling while atomic: swapper/2/0/0x00000302 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) dump_stack (lib/dump_stack.c:124) __schedule_bug (kernel/sched/core.c:5943) schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970) __schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621) schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818) schedule_timeout (kernel/time/timer.c:2160) wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148) __wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444) synchronize_rcu (kernel/rcu/tree.c:3609) mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061) mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164) mptcp_pm_get_local_id (net/mptcp/pm.c:420) subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213) subflow_v4_route_req (net/mptcp/subflow.c:305) tcp_conn_request (net/ipv4/tcp_input.c:7216) subflow_v4_conn_request (net/mptcp/subflow.c:651) tcp_rcv_state_process (net/ipv4/tcp_input.c:6709) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1)) ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234) ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254) ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580) ip_sublist_rcv (net/ipv4/ip_input.c:640) ip_list_rcv (net/ipv4/ip_input.c:675) __netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631) netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774) napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114) igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb __napi_poll (net/core/dev.c:6582) net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787) handle_softirqs (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636) irq_exit_rcu (kernel/softirq.c:651) common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14)) </IRQ> This problem seems particularly prevalent if the user advertises an endpoint that has a different external vs internal address. In the case where the external address is advertised and multiple connections already exist, multiple subflow SYNs arrive in parallel which tends to trigger the race during creation of the first local_addr_list entries which have the internal address instead. Fix by skipping the replacement of an existing implicit local address if called via mptcp_pm_nl_get_local_id. Fixes: d045b9eb95a9 ("mptcp: introduce implicit endpoints") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250303-net-mptcp-fix-sched-while-atomic-v1-1-f6a216c5a74c@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: ethtool: netlink: Allow NULL nlattrs when getting a phy_deviceMaxime Chevallier
ethnl_req_get_phydev() is used to lookup a phy_device, in the case an ethtool netlink command targets a specific phydev within a netdev's topology. It takes as a parameter a const struct nlattr *header that's used for error handling : if (!phydev) { NL_SET_ERR_MSG_ATTR(extack, header, "no phy matching phyindex"); return ERR_PTR(-ENODEV); } In the notify path after a ->set operation however, there's no request attributes available. The typical callsite for the above function looks like: phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER], info->extack); So, when tb is NULL (such as in the ethnl notify path), we have a nice crash. It turns out that there's only the PLCA command that is in that case, as the other phydev-specific commands don't have a notification. This commit fixes the crash by passing the cmd index and the nlattr array separately, allowing NULL-checking it directly inside the helper. Fixes: c15e065b46dc ("net: ethtool: Allow passing a phy index for some commands") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Reported-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com> Link: https://patch.msgid.link/20250301141114.97204-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04ppp: Fix KMSAN uninit-value warning with bpfJiayuan Chen
Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the ppp driver not initializing a 2-byte header when using socket filter. The following code can generate a PPP filter BPF program: ''' struct bpf_program fp; pcap_t *handle; handle = pcap_open_dead(DLT_PPP_PPPD, 65535); pcap_compile(handle, &fp, "ip and outbound", 0, 0); bpf_dump(&fp, 1); ''' Its output is: ''' (000) ldh [2] (001) jeq #0x21 jt 2 jf 5 (002) ldb [0] (003) jeq #0x1 jt 4 jf 5 (004) ret #65535 (005) ret #0 ''' Wen can find similar code at the following link: https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680 The maintainer of this code repository is also the original maintainer of the ppp driver. As you can see the BPF program skips 2 bytes of data and then reads the 'Protocol' field to determine if it's an IP packet. Then it read the first byte of the first 2 bytes to determine the direction. The issue is that only the first byte indicating direction is initialized in current ppp driver code while the second byte is not initialized. For normal BPF programs generated by libpcap, uninitialized data won't be used, so it's not a problem. However, for carefully crafted BPF programs, such as those generated by syzkaller [2], which start reading from offset 0, the uninitialized data will be used and caught by KMSAN. [1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791 [2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000 Cc: Paul Mackerras <paulus@samba.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+853242d9c9917165d791@syzkaller.appspotmail.com Closes: https://lore.kernel.org/bpf/000000000000dea025060d6bc3bc@google.com/ Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250228141408.393864-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04Merge branch 'fixes-for-ipa-v4-7'Jakub Kicinski
Luca Weiss says: ==================== Fixes for IPA v4.7 During bringup of IPA v4.7 unfortunately some bits were missed, and it couldn't be tested much back then due to missing features in tqftpserv which caused the modem to not enable correctly. Especially the last commit is important since it makes mobile data actually functional on SoCs with IPA v4.7 like SM6350 - used on the Fairphone 4. Before that, you'd get an IP address on the interface but then e.g. ping never got any response back. ==================== Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-0-a88dd8249d8a@fairphone.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7Luca Weiss
Enable the checksum option for these two endpoints in order to allow mobile data to actually work. Without this, no packets seem to make it through the IPA. Fixes: b310de784bac ("net: ipa: add IPA v4.7 support") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-3-a88dd8249d8a@fairphone.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: ipa: Fix QSB data for v4.7Luca Weiss
As per downstream reference, max_writes should be 12 and max_reads should be 13. Fixes: b310de784bac ("net: ipa: add IPA v4.7 support") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-2-a88dd8249d8a@fairphone.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: ipa: Fix v4.7 resource group namesLuca Weiss
In the downstream IPA driver there's only one group defined for source and destination, and the destination group doesn't have a _DPL suffix. Fixes: b310de784bac ("net: ipa: add IPA v4.7 support") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-1-a88dd8249d8a@fairphone.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04HID: Intel-thc-hid: Intel-quickspi: Correct device state after S4Even Xu
During S4 retore flow, quickspi device was resetted by driver and state was changed to RESETTED. It is needed to be change to ENABLED state after S4 re-initialization finished, otherwise, device will run in wrong state and HID input data will be dropped. Signed-off-by: Even Xu <even.xu@intel.com> Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation") Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-03-04HID: intel-thc-hid: Fix spelling mistake "intput" -> "input"Colin Ian King
There is a spelling mistake in a dev_err_once message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Even Xu <even.xu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-03-04HID: hid-steam: Fix use-after-free when detaching deviceVicki Pfau
When a hid-steam device is removed it must clean up the client_hdev used for intercepting hidraw access. This can lead to scheduling deferred work to reattach the input device. Though the cleanup cancels the deferred work, this was done before the client_hdev itself is cleaned up, so it gets rescheduled. This patch fixes the ordering to make sure the deferred work is properly canceled. Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com Fixes: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work") Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-03-04HID: debug: Fix spelling mistake "Messanger" -> "Messenger"Colin Ian King
There is a spelling mistake in a literal string. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-03-04HID: appleir: Fix potential NULL dereference at raw event handleDaniil Dulov
Syzkaller reports a NULL pointer dereference issue in input_event(). BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline] BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395 Read of size 8 at addr 0000000000000028 by task syz-executor199/2949 CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 kasan_report+0xd9/0x110 mm/kasan/report.c:602 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:68 [inline] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] is_event_supported drivers/input/input.c:67 [inline] input_event+0x42/0xa0 drivers/input/input.c:395 input_report_key include/linux/input.h:439 [inline] key_down drivers/hid/hid-appleir.c:159 [inline] appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232 __hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111 hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484 __usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734 dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993 __run_hrtimer kernel/time/hrtimer.c:1739 [inline] __hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803 hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820 handle_softirqs+0x206/0x8d0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 __mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185 add_timer+0x62/0x90 kernel/time/timer.c:1295 schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98 usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645 usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784 hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> This happens due to the malformed report items sent by the emulated device which results in a report, that has no fields, being added to the report list. Due to this appleir_input_configured() is never called, hidinput_connect() fails which results in the HID_CLAIMED_INPUT flag is not being set. However, it does not make appleir_probe() fail and lets the event callback to be called without the associated input device. Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook early if the driver didn't claim any input_dev for some reason. Moreover, some other hid drivers accessing input_dev in their event callbacks do have similar checks, too. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices") Cc: stable@vger.kernel.org Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-03-04HID: apple: disable Fn key handling on the Omoton KB066Alex Henrie
Remove the fixup to make the Omoton KB066's F6 key F6 when not holding Fn. That was really just a hack to allow typing F6 in fnmode>0, and it didn't fix any of the other F keys that were likewise untypable in fnmode>0. Instead, because the Omoton's Fn key is entirely internal to the keyboard, completely disable Fn key translation when an Omoton is detected, which will prevent the hid-apple driver from interfering with the keyboard's built-in Fn key handling. All of the F keys, including F6, are then typable when Fn is held. The Omoton KB066 and the Apple A1255 both have HID product code 05ac:022c. The self-reported name of every original A1255 when they left the factory was "Apple Wireless Keyboard". By default, Mac OS changes the name to "<username>'s keyboard" when pairing with the keyboard, but Mac OS allows the user to set the internal name of Apple keyboards to anything they like. The Omoton KB066's name, on the other hand, is not configurable: It is always "Bluetooth Keyboard". Because that name is so generic that a user might conceivably use the same name for a real Apple keyboard, detect Omoton keyboards based on both having that exact name and having HID product code 022c. Fixes: 819083cb6eed ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard") Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-03-04HID: i2c-hid: improve i2c_hid_get_report error messageWentao Guan
We have two places to print "failed to set a report to ...", use "get a report from" instead of "set a report to", it makes people who knows less about the module to know where the error happened. Before: i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11 After: i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11 Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-03-04platform/x86/amd: pmf: Add balanced-performance to hidden choicesMario Limonciello
Acer's WMI driver uses balanced-performance but AMD-PMF doesn't. In case a machine binds with both drivers let amd-pmf use balanced-performance as well. Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers") Suggested-by: Antheas Kapenekakis <lkml@antheas.dev> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Antheas Kapenekakis <lkml@antheas.dev> Tested-by: Derek J. Clark <derekjohn.clark@gmail.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20250228170155.2623386-4-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-03-04platform/x86/amd: pmf: Add 'quiet' to hidden choicesMario Limonciello
When amd-pmf and asus-wmi are both bound no low power option shows up in sysfs. Add a hidden choice for amd-pmf to support 'quiet' mode to let both bind. Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers") Suggested-by: Antheas Kapenekakis <lkml@antheas.dev> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Antheas Kapenekakis <lkml@antheas.dev> Tested-by: Derek J. Clark <derekjohn.clark@gmail.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20250228170155.2623386-3-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-03-04ACPI: platform_profile: Add support for hidden choicesMario Limonciello
When two drivers don't support all the same profiles the legacy interface only exports the common profiles. This causes problems for cases where one driver uses low-power but another uses quiet because the result is that neither is exported to sysfs. To allow two drivers to disagree, add support for "hidden choices". Hidden choices are platform profiles that a driver supports to be compatible with the platform profile of another driver. Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers") Reported-by: Antheas Kapenekakis <lkml@antheas.dev> Closes: https://lore.kernel.org/platform-driver-x86/e64b771e-3255-42ad-9257-5b8fc6c24ac9@gmx.de/T/#mc068042dd29df36c16c8af92664860fc4763974b Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Antheas Kapenekakis <lkml@antheas.dev> Tested-by: Derek J. Clark <derekjohn.clark@gmail.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20250228170155.2623386-2-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-03-04drm/xe: Fix GT "for each engine" workaroundsTvrtko Ursulin
Any rules using engine matching are currently broken due RTP processing happening too in early init, before the list of hardware engines has been initialised. Fix this by moving workaround processing to later in the driver probe sequence, to just before the processed list is used for the first time. Looking at the debugfs gt0/workarounds on ADL-P we notice 14011060649 should be present while we see, before: GT Workarounds 14011059788 14015795083 And with the patch: GT Workarounds 14011060649 14011059788 14015795083 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org # v6.11+ Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250227101304.46660-2-tvrtko.ursulin@igalia.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 25d434cef791e03cf40680f5441b576c639bfa84) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:09:14 +0000