| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.13-rc5
- IMX: fixed stop condition in single master mode and added
compatible string for errata adherence.
- Microchip: Added support for proper repeated sends and fixed
unnecessary NAKs on empty messages, which caused false bus
detection.
|
|
Now when destroying the IO queue we call nvme_tcp_stop_io_queues()
twice, nvme_tcp_destroy_io_queues() has an unnecessary call. Here we
try to remove nvme_tcp_destroy_io_queues() and merge it into
nvme_tcp_teardown_io_queues(), simplify the code and align with
nvme-rdma, make it easy to maintaince.
Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Using mutex lock in IO hot path causes the kernel BUG sleeping while
atomic. Shinichiro[1], first encountered this issue while running blktest
nvme/052 shown below:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 996, name: (udev-worker)
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
2 locks held by (udev-worker)/996:
#0: ffff8881004570c8 (mapping.invalidate_lock){.+.+}-{3:3}, at: page_cache_ra_unbounded+0x155/0x5c0
#1: ffffffff8607eaa0 (rcu_read_lock){....}-{1:2}, at: blk_mq_flush_plug_list+0xa75/0x1950
CPU: 2 UID: 0 PID: 996 Comm: (udev-worker) Not tainted 6.12.0-rc3+ #339
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x90
__might_resched.cold+0x1f7/0x23d
? __pfx___might_resched+0x10/0x10
? vsnprintf+0xdeb/0x18f0
__mutex_lock+0xf4/0x1220
? nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
? __pfx_vsnprintf+0x10/0x10
? __pfx___mutex_lock+0x10/0x10
? snprintf+0xa5/0xe0
? xas_load+0x1ce/0x3f0
? nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
? __pfx_nvmet_subsys_nsid_exists+0x10/0x10 [nvmet]
nvmet_req_find_ns+0x24e/0x300 [nvmet]
nvmet_req_init+0x694/0xd40 [nvmet]
? blk_mq_start_request+0x11c/0x750
? nvme_setup_cmd+0x369/0x990 [nvme_core]
nvme_loop_queue_rq+0x2a7/0x7a0 [nvme_loop]
? __pfx___lock_acquire+0x10/0x10
? __pfx_nvme_loop_queue_rq+0x10/0x10 [nvme_loop]
__blk_mq_issue_directly+0xe2/0x1d0
? __pfx___blk_mq_issue_directly+0x10/0x10
? blk_mq_request_issue_directly+0xc2/0x140
blk_mq_plug_issue_direct+0x13f/0x630
? lock_acquire+0x2d/0xc0
? blk_mq_flush_plug_list+0xa75/0x1950
blk_mq_flush_plug_list+0xa9d/0x1950
? __pfx_blk_mq_flush_plug_list+0x10/0x10
? __pfx_mpage_readahead+0x10/0x10
__blk_flush_plug+0x278/0x4d0
? __pfx___blk_flush_plug+0x10/0x10
? lock_release+0x460/0x7a0
blk_finish_plug+0x4e/0x90
read_pages+0x51b/0xbc0
? __pfx_read_pages+0x10/0x10
? lock_release+0x460/0x7a0
page_cache_ra_unbounded+0x326/0x5c0
force_page_cache_ra+0x1ea/0x2f0
filemap_get_pages+0x59e/0x17b0
? __pfx_filemap_get_pages+0x10/0x10
? lock_is_held_type+0xd5/0x130
? __pfx___might_resched+0x10/0x10
? find_held_lock+0x2d/0x110
filemap_read+0x317/0xb70
? up_write+0x1ba/0x510
? __pfx_filemap_read+0x10/0x10
? inode_security+0x54/0xf0
? selinux_file_permission+0x36d/0x420
blkdev_read_iter+0x143/0x3b0
vfs_read+0x6ac/0xa20
? __pfx_vfs_read+0x10/0x10
? __pfx_vm_mmap_pgoff+0x10/0x10
? __pfx___seccomp_filter+0x10/0x10
ksys_read+0xf7/0x1d0
? __pfx_ksys_read+0x10/0x10
do_syscall_64+0x93/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f565bd1ce11
Code: 00 48 8b 15 09 90 0d 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 d0 ad 01 00 f3 0f 1e fa 80 3d 35 12 0e 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007ffd6e7a20c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000001000 RCX: 00007f565bd1ce11
RDX: 0000000000001000 RSI: 00007f565babb000 RDI: 0000000000000014
RBP: 00007ffd6e7a2130 R08: 00000000ffffffff R09: 0000000000000000
R10: 0000556000bfa610 R11: 0000000000000246 R12: 000000003ffff000
R13: 0000556000bfa5b0 R14: 0000000000000e00 R15: 0000556000c07328
</TASK>
Apparently, the above issue is caused due to using mutex lock while
we're in IO hot path. It's a regression caused with commit 505363957fad
("nvmet: fix nvme status code when namespace is disabled"). The mutex
->su_mutex is used to find whether a disabled nsid exists in the config
group or not. This is to differentiate between a nsid that is disabled
vs non-existent.
To mitigate the above issue, we've worked upon a fix[2] where we now
insert nsid in subsys Xarray as soon as it's created under config group
and later when that nsid is enabled, we add an Xarray mark on it and set
ns->enabled to true. The Xarray mark is useful while we need to loop
through all enabled namepsaces under a subsystem using xa_for_each_marked()
API. If later a nsid is disabled then we clear Xarray mark from it and also
set ns->enabled to false. It's only when nsid is deleted from the config
group we delete it from the Xarray.
So with this change, now we could easily differentiate a nsid is disabled
(i.e. Xarray entry for ns exists but ns->enabled is set to false) vs non-
existent (i.e.Xarray entry for ns doesn't exist).
Link: https://lore.kernel.org/linux-nvme/20241022070252.GA11389@lst.de/ [2]
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-nvme/tqcy3sveity7p56v7ywp7ssyviwcb3w4623cnxj3knoobfcanq@yxgt2mjkbkam/ [1]
Fixes: 505363957fad ("nvmet: fix nvme status code when namespace is disabled")
Fix-suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Ensure we propagate npwg to the target as well instead
of assuming its the same logical blocks per physical block.
This ensures devices with large IUs information properly
propagated on the target.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvmet_root_discovery_nqn_store treats the subsysnqn string like a fixed
size buffer, even though it is dynamically allocated to the size of the
string.
Create a new string with kstrndup instead of using the old buffer.
Reported-by: syzbot+ff4aab278fa7e27e0f9e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff4aab278fa7e27e0f9e
Fixes: 95409e277d83 ("nvmet: implement unique discovery NQN")
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
802.2+LLC+SNAP frames received by napi_complete_done with GRO and DSA
have skb->transport_header set two bytes short, or pointing 2 bytes
before network_header & skb->data. As snap_rcv expects transport_header
to point to SNAP header (OID:PID) after LLC processing advances offset
over LLC header (llc_rcv & llc_fixup_skb), code doesn't find a match
and packet is dropped.
Between napi_complete_done and snap_rcv, transport_header is not used
until __netif_receive_skb_core, where originally it was being reset.
Commit fda55eca5a33 ("net: introduce skb_transport_header_was_set()")
only does so if not set, on the assumption the value was set correctly
by GRO (and also on assumption that "network stacks usually reset the
transport header anyway"). Afterwards it is moved forward by
llc_fixup_skb.
Locally generated traffic shows up at __netif_receive_skb_core with no
transport_header set and is processed without issue. On a setup with
GRO but no DSA, transport_header and network_header are both set to
point to skb->data which is also correct.
As issue is LLC specific, to avoid impacting non-LLC traffic, and to
follow up on original assumption made on previous code change,
llc_fixup_skb to reset the offset after skb pull. llc_fixup_skb
assumes the LLC header is at skb->data, and by definition SNAP header
immediately follows.
Fixes: fda55eca5a33 ("net: introduce skb_transport_header_was_set()")
Signed-off-by: Antonio Pastor <antonio.pastor@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241225010723.2830290-1-antonio.pastor@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains one Netfilter fix for net:
1) Fix unaligned atomic read on struct nft_set_ext in nft_set_hash
backend that causes an alignment failure splat on aarch64. This
is related to a recent fix and it has been reported via the
regressions mailing list.
* tag 'nf-24-12-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext
====================
Link: https://patch.msgid.link/20241224233109.361755-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
netlink: specs: mptcp: fixes for some descriptions
When looking at the MPTCP PM Netlink specs rendered version [1], a few
small issues have been found with the descriptions, and fixed here:
- Patch 1: add a missing attribute for two events. For >= v5.19.
- Patch 2: clearly mention the attributes. For >= v6.7.
- Patch 3: fix missing descriptions and replace a wrong one. For >= v6.7.
Link: https://docs.kernel.org/networking/netlink_spec/mptcp_pm.html [1]
v1: https://lore.kernel.org/20241219-net-mptcp-netlink-specs-pm-doc-fixes-v1-0-825d3b45f27b@kernel.org
====================
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-0-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two operations didn't have a small description. It looks like something
that has been missed in the original commit introducing this file.
Replace the two "todo" by a small and simple description: Create/Destroy
subflow.
While at it, also uniform the capital letters, avoid double spaces, and
fix the "announce" event description: a new "address" has been
announced, not a new "subflow".
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-3-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rendered version of the MPTCP events [1] looked strange, because the
whole content of the 'doc' was displayed in the same block.
It was then not clear that the first words, not even ended by a period,
were the attributes that are defined when such events are emitted. These
attributes have now been moved to the end, prefixed by 'Attributes:' and
ended with a period. Note that '>-' has been added after 'doc:' to allow
':' in the text below.
The documentation in the UAPI header has been auto-generated by:
./tools/net/ynl/ynl-regen.sh
Link: https://docs.kernel.org/networking/netlink_spec/mptcp_pm.html#event-type [1]
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-2-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This attribute is added with the 'created' and 'established' events, but
the documentation didn't mention it.
The documentation in the UAPI header has been auto-generated by:
./tools/net/ynl/ynl-regen.sh
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-1-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- fix potential array out of bounds access in gpio-charger
- cros_charge-control:
- fix concurrent sysfs access
- allow start_threshold == end_threshold
- workaround limited v2 charge threshold API
- bq24296: fix vbus regulator handling
* tag 'for-v6.13-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq24190: Fix BQ24296 Vbus regulator support
power: supply: cros_charge-control: hide start threshold on v2 cmd
power: supply: cros_charge-control: allow start_threshold == end_threshold
power: supply: cros_charge-control: add mutex for driver data
power: supply: gpio-charger: Fix set charge current limits
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Madhavan Srinivasan:
- Add close() callback in vas_vm_ops struct for proper cleanup
Thanks to Haren Myneni.
* tag 'powerpc-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/vas: Add close() callback in vas_vm_ops struct
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
"Change the priority of the module callback of kprobe events so that it
is called after the jump label list on the module is updated.
This ensures the kprobe can check whether it is not on the jump label
address correctly"
* tag 'probes-fixes-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobe: Make trace_kprobe's module callback called after jump_label update
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
- stddef: make __struct_group() UAPI C++-friendly (Alexander Lobakin)
* tag 'hardening-v6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
stddef: make __struct_group() UAPI C++-friendly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two minor tracing fixes:
- Add "const" to "char *" in event structure field that gets assigned
literals.
- Check size of input passed into the tracing cpumask file.
If a too large of an input gets passed into the cpumask file, it
could trigger a warning in the bitmask parsing code"
* tag 'trace-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Prevent bad count for tracing_cpumask_write
tracing: Constify string literal data member in struct trace_event_call
|
|
rtla timerlat hist currently computers the minimum, maximum and average
latency even in cases when there are zero samples. This leads to
nonsensical values being calculated for maximum and minimum, and to
divide by zero for average.
A similar bug is fixed by 01b05fc0e5f3 ("rtla/timerlat: Fix histogram
report when a cpu count is 0") but the bug still remains for printing
the sum over all CPUs in timerlat_print_stats_all.
The issue can be reproduced with this command:
$ rtla timerlat hist -U -d 1s
Index
over:
count:
min:
avg:
max:
Floating point exception (core dumped)
(There are always no samples with -U unless the user workload is
created.)
Fix the bug by omitting max/min/avg when sample count is zero,
displaying a dash instead, just like we already do for the individual
CPUs. The logic is moved into a new function called
format_summary_value, which is used for both the individual CPUs
and for the overall summary.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20241127134130.51171-1-tglozar@redhat.com
Fixes: 1462501c7a8 ("rtla/timerlat: Add a summary for hist mode")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. Nothing really stands out, fortunately.
- Follow-up fixes for the new compress offload API extension
- A few ASoC SOF, AMD and Mediatek quirks and fixes
- A regression fix in legacy SH driver cleanup
- Fix DMA mapping error handling in the helper code
- Fix kselftest dependency"
* tag 'sound-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: sh: Fix wrong argument order for copy_from_iter()
selftests/alsa: Fix circular dependency involving global-timer
ALSA: memalloc: prefer dma_mapping_error() over explicit address checking
ALSA: compress_offload: improve file descriptors installation for dma-buf
ALSA: compress_offload: use safe list iteration in snd_compr_task_seq()
ALSA: compress_offload: avoid 64-bit get_user()
ALSA: compress_offload: import DMA_BUF namespace
ASoC: mediatek: disable buffer pre-allocation
ASoC: rt722: add delay time to wait for the calibration procedure
ASoC: SOF: Intel: hda-dai: Do not release the link DMA on STOP
ASoC: dt-bindings: realtek,rt5645: Fix CPVDD voltage comment
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 21QA and 21QB
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 21Q6 and 21Q7
ASoC: amd: ps: Fix for enabling DMIC on acp63 platform via _DSD entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Bunch of minor driver fixes for drivers in this cycle:
- Kernel doc warning documentation fixes
- apple driver fix for register access
- amd driver dropping private dma_ops
- freescale cleanup path fix
- refcount fix for mv_xor driver
- null pointer deref fix for at_xdmac driver
- GENMASK to GENMASK_ULL fix for loongson2 apb driver
- Tegra driver fix for correcting dma status"
* tag 'dmaengine-fix-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: tegra: Return correct DMA status when paused
dmaengine: mv_xor: fix child node refcount handling in early exit
dmaengine: fsl-edma: implement the cleanup path of fsl_edma3_attach_pd()
dmaengine: amd: qdma: Remove using the private get and set dma_ops APIs
dmaengine: apple-admac: Avoid accessing registers in probe
linux/dmaengine.h: fix a few kernel-doc warnings
dmaengine: loongson2-apb: Change GENMASK to GENMASK_ULL
dmaengine: dw: Select only supported masters for ACPI devices
dmaengine: at_xdmac: avoid null_prt_deref in at_xdmac_prep_dma_memset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"A few core API fixes for devm calls and bunch of driver fixes as
usual:
- devm_phy_xxx fixes for few APIs in the phy core
- qmp driver register name config
- init sequence fix for usb driver
- rockchip driver setting drvdata correctly in samsung hdptx and
reset fix for naneng combophy
- regulator dependency fix for mediatek hdmi driver
- overflow assertion fix for stm32 driver"
* tag 'phy-fixes-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: mediatek: phy-mtk-hdmi: add regulator dependency
phy: freescale: fsl-samsung-hdmi: Fix 64-by-32 division cocci warnings
phy: core: Fix an OF node refcount leakage in of_phy_provider_lookup()
phy: core: Fix an OF node refcount leakage in _of_phy_get()
phy: core: Fix that API devm_phy_destroy() fails to destroy the phy
phy: core: Fix that API devm_of_phy_provider_unregister() fails to unregister the phy provider
phy: core: Fix that API devm_phy_put() fails to release the phy
phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PM
phy: stm32: work around constant-value overflow assertion
phy: qcom-qmp: Fix register name in RX Lane config of SC8280XP
phy: rockchip: naneng-combphy: fix phy reset
phy: usb: Toggle the PHY power during init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform fix from Tzung-Bi Shih:
- Fix wrong product names for early Framework Laptops
* tag 'chrome-platform-for-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_lpc: fix product identity for early Framework Laptops
|
|
BUG: KASAN: slab-use-after-free in __lock_acquire+0x370b/0x4a10 kernel/locking/lockdep.c:5089
Call Trace:
<TASK>
...
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
try_to_wake_up+0xb5/0x23c0 kernel/sched/core.c:4205
io_sq_thread_park+0xac/0xe0 io_uring/sqpoll.c:55
io_sq_thread_finish+0x6b/0x310 io_uring/sqpoll.c:96
io_sq_offload_create+0x162/0x11d0 io_uring/sqpoll.c:497
io_uring_create io_uring/io_uring.c:3724 [inline]
io_uring_setup+0x1728/0x3230 io_uring/io_uring.c:3806
...
Kun Hu reports that the SQPOLL creating error path has UAF, which
happens if io_uring_alloc_task_context() fails and then io_sq_thread()
manages to run and complete before the rest of error handling code,
which means io_sq_thread_finish() is looking at already killed task.
Note that this is mostly theoretical, requiring fault injection on
the allocation side to trigger in practice.
Cc: stable@vger.kernel.org
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0f2f1aa5729332612bd01fe0f2f385fd1f06ce7c.1735231717.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Inside ublk_abort_requests(), gendisk is grabbed for aborting all
inflight requests. And ublk_abort_requests() is called when exiting
the uring context or handling timeout.
If add_disk() fails, the gendisk may have been freed when calling
ublk_abort_requests(), so use-after-free can be caused when getting
disk's reference in ublk_abort_requests().
Fixes the bug by detaching gendisk from ublk device if add_disk() fails.
Fixes: bd23f6c2c2d0 ("ublk: quiesce request queue when aborting queue")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241225110640.351531-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Running i2c-detect currently produces an output akin to:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 -- 0a -- 0c -- 0e --
10: 10 -- 12 -- 14 -- 16 -- UU 19 -- 1b -- 1d -- 1f
20: -- 21 -- 23 -- 25 -- 27 -- 29 -- 2b -- 2d -- 2f
30: -- -- -- -- -- -- -- -- 38 -- 3a -- 3c -- 3e --
40: 40 -- 42 -- 44 -- 46 -- 48 -- 4a -- 4c -- 4e --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: 60 -- 62 -- 64 -- 66 -- 68 -- 6a -- 6c -- 6e --
70: 70 -- 72 -- 74 -- 76 --
This happens because for an i2c_msg with a len of 0 the driver will
mark the transmission of the message as a success once the START has
been sent, without waiting for the devices on the bus to respond with an
ACK/NAK. Since i2cdetect seems to run in a tight loop over all addresses
the NAK is treated as part of the next test for the next address.
Delete the fast path that marks a message as complete when idev->msg_len
is zero after sending a START/RESTART since this isn't a valid scenario.
CC: stable@vger.kernel.org
Fixes: 64a6f1c4987e ("i2c: add support for microchip fpga i2c controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20241218-outbid-encounter-b2e78b1cc707@spud
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
At present, where repeated sends are intended to be used, the
i2c-microchip-core driver sends a stop followed by a start. Lots of i2c
devices must not malfunction in the face of this behaviour, because the
driver has operated like this for years! Try to keep track of whether or
not a repeated send is required, and suppress sending a stop in these
cases.
CC: stable@vger.kernel.org
Fixes: 64a6f1c4987e ("i2c: add support for microchip fpga i2c controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20241218-football-composure-e56df2461461@spud
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver
compatible string table, at the result, "fsl,imx21-i2c" will be
matched, but it will cause erratum ERR007805 not be applied in fact.
So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply
the erratum ERR007805(https://www.nxp.com/docs/en/errata/IMX7DS_3N09P.pdf).
"
ERR007805 I2C: When the I2C clock speed is configured for 400 kHz,
the SCL low period violates the I2C spec of 1.3 uS min
Description: When the I2C module is programmed to operate at the
maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL
clock low period violates the I2C spec of 1.3 uS min. The user must
reduce the clock speed to obtain the SCL low time to meet the 1.3us
I2C minimum required. This behavior means the SoC is not compliant
to the I2C spec at 400kHz.
Workaround: To meet the clock low period requirement in fast speed
mode, SCL must be configured to 384KHz or less.
"
"fsl,imx7d-i2c" already is documented in binding doc. This erratum
fix has been included in imx6_i2c_hwdata and it is the same in all
I.MX6/7/8, so just reuse it.
Fixes: 39c025721d70 ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit")
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Fixes: 39c025721d70 ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit")
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20241218044238.143414-1-carlos.song@nxp.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
A regression was introduced with the implementation of single-master
mode, preventing proper stop conditions from being generated. Devices
that require a valid stop condition, such as EEPROMs, fail to function
correctly as a result.
The issue only affects devices with the single-master property enabled.
This commit resolves the issue by re-enabling I2C bus busy bit (IBB)
polling for single-master mode when generating a stop condition. The fix
further ensures that the i2c_imx->stopped flag is cleared at the start
of each transfer, allowing the stop condition to be correctly generated
in i2c_imx_stop().
According to the reference manual (IMX8MMRM, Rev. 2, 09/2019, page
5270), polling the IBB bit to determine if the bus is free is only
necessary in multi-master mode. Consequently, the IBB bit is not polled
for the start condition in single-master mode.
Fixes: 6692694aca86 ("i2c: imx: do not poll for bus busy in single master mode")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20241216151829.74056-1-eichest@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The product names for the Framework Laptop (12th and 13th Generation
Intel Core) are incorrect as of 62be134abf42.
Fixes: 62be134abf42 ("platform/chrome: cros_ec_lpc: switch primary DMI data for Framework Laptop")
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241224-platform-chrome-cros_ec_lpc-fix-product-identity-for-early-framework-laptops-v1-1-0d31d6e1d22c@howett.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
The dsp_local_on selftest expects the scheduler to fail by trying to
schedule an e.g. CPU-affine task to the wrong CPU. However, this isn't
guaranteed to happen in the 1 second window that the test is running.
Besides, it's odd to have this particular exception path tested when there
are no other tests that verify that the interface is working at all - e.g.
the test would pass if dsp_local_on interface is completely broken and fails
on any attempt.
Flip the test so that it verifies that the feature works. While at it, fix a
typo in the info message.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Link: http://lkml.kernel.org/r/Z1n9v7Z6iNJ-wKmq@slm.duckdns.org
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Access to genmask field in struct nft_set_ext results in unaligned
atomic read:
[ 72.130109] Unable to handle kernel paging request at virtual address ffff0000c2bb708c
[ 72.131036] Mem abort info:
[ 72.131213] ESR = 0x0000000096000021
[ 72.131446] EC = 0x25: DABT (current EL), IL = 32 bits
[ 72.132209] SET = 0, FnV = 0
[ 72.133216] EA = 0, S1PTW = 0
[ 72.134080] FSC = 0x21: alignment fault
[ 72.135593] Data abort info:
[ 72.137194] ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000
[ 72.142351] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 72.145989] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 72.150115] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000237d27000
[ 72.154893] [ffff0000c2bb708c] pgd=0000000000000000, p4d=180000023ffff403, pud=180000023f84b403, pmd=180000023f835403,
+pte=0068000102bb7707
[ 72.163021] Internal error: Oops: 0000000096000021 [#1] SMP
[...]
[ 72.170041] CPU: 7 UID: 0 PID: 54 Comm: kworker/7:0 Tainted: G E 6.13.0-rc3+ #2
[ 72.170509] Tainted: [E]=UNSIGNED_MODULE
[ 72.170720] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-stable202302-for-qemu 03/01/2023
[ 72.171192] Workqueue: events_power_efficient nft_rhash_gc [nf_tables]
[ 72.171552] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 72.171915] pc : nft_rhash_gc+0x200/0x2d8 [nf_tables]
[ 72.172166] lr : nft_rhash_gc+0x128/0x2d8 [nf_tables]
[ 72.172546] sp : ffff800081f2bce0
[ 72.172724] x29: ffff800081f2bd40 x28: ffff0000c2bb708c x27: 0000000000000038
[ 72.173078] x26: ffff0000c6780ef0 x25: ffff0000c643df00 x24: ffff0000c6778f78
[ 72.173431] x23: 000000000000001a x22: ffff0000c4b1f000 x21: ffff0000c6780f78
[ 72.173782] x20: ffff0000c2bb70dc x19: ffff0000c2bb7080 x18: 0000000000000000
[ 72.174135] x17: ffff0000c0a4e1c0 x16: 0000000000003000 x15: 0000ac26d173b978
[ 72.174485] x14: ffffffffffffffff x13: 0000000000000030 x12: ffff0000c6780ef0
[ 72.174841] x11: 0000000000000000 x10: ffff800081f2bcf8 x9 : ffff0000c3000000
[ 72.175193] x8 : 00000000000004be x7 : 0000000000000000 x6 : 0000000000000000
[ 72.175544] x5 : 0000000000000040 x4 : ffff0000c3000010 x3 : 0000000000000000
[ 72.175871] x2 : 0000000000003a98 x1 : ffff0000c2bb708c x0 : 0000000000000004
[ 72.176207] Call trace:
[ 72.176316] nft_rhash_gc+0x200/0x2d8 [nf_tables] (P)
[ 72.176653] process_one_work+0x178/0x3d0
[ 72.176831] worker_thread+0x200/0x3f0
[ 72.176995] kthread+0xe8/0xf8
[ 72.177130] ret_from_fork+0x10/0x20
[ 72.177289] Code: 54fff984 d503201f d2800080 91003261 (f820303f)
[ 72.177557] ---[ end trace 0000000000000000 ]---
Align struct nft_set_ext to word size to address this and
documentation it.
pahole reports that this increases the size of elements for rhash and
pipapo in 8 bytes on x86_64.
Fixes: 7ffc7481153b ("netfilter: nft_set_hash: skip duplicated elements pending gc run")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
struct bpf_iter_scx_dsq *it maybe not initialized.
If we didn't call scx_bpf_dsq_move_set_vtime and scx_bpf_dsq_move_set_slice
before scx_bpf_dsq_move, it would cause unexpected behaviors:
1. Assign a huge slice into p->scx.slice
2. Assign a invalid vtime into p->scx.dsq_vtime
Signed-off-by: Henry Huang <henry.hj@antgroup.com>
Fixes: 6462dd53a260 ("sched_ext: Compact struct bpf_iter_scx_dsq_kern")
Cc: stable@vger.kernel.org # v6.12
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Fix a compiler warning with W=1:
kernel/workqueue.c: error:
function ‘__alloc_workqueue’ might be a candidate for ‘gnu_printf’
format attribute[-Werror=suggest-attribute=format]
5657 | name_len = vsnprintf(wq->name, sizeof(wq->name), fmt, args);
| ^~~~~~~~
Fixes: 9b59a85a84dc ("workqueue: Don't call va_start / va_end twice")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Four minor fixes for NAND controller drivers (cleanup path, double
actions, and W=1 warning) as well as a cast to avoid overflows in an
mtd device driver"
* tag 'mtd/fixes-for-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: omap2: Fix build warnings with W=1
mtd: rawnand: arasan: Fix missing de-registration of NAND
mtd: rawnand: arasan: Fix double assertion of chip-select
mtd: diskonchip: Cast an operand to prevent potential overflow
mtd: rawnand: fix double free in atmel_pmecc_create_user()
|
|
The driver no longer builds when regulator support is unavailable:
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi.o: in function `mtk_hdmi_phy_register_regulators':
phy-mtk-hdmi.c:(.text.unlikely+0x3e): undefined reference to `devm_regulator_register'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_is_enabled':
phy-mtk-hdmi-mt8195.c:(.text+0x326): undefined reference to `rdev_get_drvdata'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_disable':
phy-mtk-hdmi-mt8195.c:(.text+0x346): undefined reference to `rdev_get_drvdata'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_enable':
Fixes: 49393b2da1cd ("phy: mediatek: phy-mtk-hdmi: Register PHY provided regulator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241213083056.2596499-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Kernel test robot returns the following warning:
do_div() does a 64-by-32 division, please consider using div64_ul instead.
To prevent the 64-by-32 divsion, consolidate both the multiplication
and the do_div into one line which explicitly uses u64 sizes.
Fixes: 1951dbb41d1d ("phy: freescale: fsl-samsung-hdmi: Support dynamic integer")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412091243.fSObwwPi-lkp@intel.com/
Link: https://lore.kernel.org/r/20241215220555.99113-1-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For macro for_each_child_of_node(parent, child), refcount of @child has
been increased before entering its loop body, so normally needs to call
of_node_put(@child) before returning from the loop body to avoid refcount
leakage.
of_phy_provider_lookup() has such usage but does not call of_node_put()
before returning, so cause leakage of the OF node refcount.
Fix by simply calling of_node_put() before returning from the loop body.
The APIs affected by this issue are shown below since they indirectly
invoke problematic of_phy_provider_lookup().
phy_get()
of_phy_get()
devm_phy_get()
devm_of_phy_get()
devm_of_phy_get_by_index()
Fixes: 2a4c37016ca9 ("phy: core: Fix of_phy_provider_lookup to return PHY provider for sub node")
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-5-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
_of_phy_get() will directly return when suffers of_device_is_compatible()
error, but it forgets to decrease refcount of OF node @args.np before error
return, the refcount was increased by previous of_parse_phandle_with_args()
so causes the OF node's refcount leakage.
Fix by decreasing the refcount via of_node_put() before the error return.
Fixes: b7563e2796f8 ("phy: work around 'phys' references to usb-nop-xceiv devices")
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-4-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For devm_phy_destroy(), its comment says it needs to invoke phy_destroy()
to destroy the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_consume(), and the missing
phy_destroy() call will cause that the phy fails to be destroyed.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-3-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
unregister the phy provider
For devm_of_phy_provider_unregister(), its comment says it needs to invoke
of_phy_provider_unregister() to unregister the phy provider, but it will
not actually invoke the function since devres_destroy() does not call
devm_phy_provider_release(), and the missing of_phy_provider_unregister()
call will cause:
- The phy provider fails to be unregistered.
- Leak both memory and the OF node refcount.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/stable/20241213-phy_core_fix-v6-2-40ae28f5015a%40quicinc.com
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-2-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For devm_phy_put(), its comment says it needs to invoke phy_put() to
release the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_release(), and the missing
phy_put() call will cause:
- The phy fails to be released.
- devm_phy_put() can not fully undo what API devm_phy_get() does.
- Leak refcount of both the module and device for below typical usage:
devm_phy_get(); // or its variant
...
err = do_something();
if (err)
goto err_out;
...
err_out:
devm_phy_put(); // leak refcount here
The file(s) affected by this issue are shown below since they have such
typical usage.
drivers/pci/controller/cadence/pcie-cadence.c
drivers/net/ethernet/ti/am65-cpsw-nuss.c
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Cc: stable@vger.kernel.org
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-1-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently, the driver does not return the correct DMA status when a DMA
pause is issued by the client drivers. This causes GPCDMA users to
assume that DMA is still running, while in reality, the DMA is paused.
Return DMA_PAUSED for tx_status() if the channel is paused in the middle
of a transfer.
Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver")
Cc: stable@vger.kernel.org
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Link: https://lore.kernel.org/r/20241212124412.5650-1-kkartik@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The for_each_child_of_node() loop requires explicit calls to
of_node_put() to decrement the child's refcount upon early exits (break,
goto, return).
Add the missing calls in the two early exits before the goto
instructions.
Cc: stable@vger.kernel.org
Fixes: f7d12ef53ddf ("dma: mv_xor: add Device Tree binding")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241011-dma_mv_xor_of_node_put-v1-1-3c2de819f463@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
sub-pipe PG is not present on DG1. Setting these bits can disable
other power gates and cause GPU hangs on video playbacks.
VLK: 16314, 4304
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381
Fixes: 85a12d7eb8fe ("drm/i915/tgl: Fix Media power gate sequence.")
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219210019.70532-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit de7061947b4ed4be857d452c60d5fb795831d79e)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
According to spec VDR_CUSTOM_WIDTH register gets programmed after pll
specific VDR registers and TX Lane programming registers are done.
Moreover we only program into C10_VDR_CONTROL1 to update config and
setup master lane once all VDR registers are written into.
Bspec: 67636
Fixes: 51390cc0e00a ("drm/i915/mtl: Add Support for C10 PHY message bus and pll programming")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216181554.2861381-1-suraj.kandpal@intel.com
(cherry picked from commit f9d418552ba1e3a0e92487ff82eb515dab7516c0)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
The similar patch in siw is in the link:
https://git.kernel.org/rdma/rdma/c/16b87037b48889
This problem also occurred in RXE. The following analyze this problem.
In the following Call Traces:
"
BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0 net/core/dev.c:8782
Read of size 4 at addr ffff8880554640b0 by task kworker/1:4/5295
CPU: 1 UID: 0 PID: 5295 Comm: kworker/1:4 Not tainted
6.12.0-rc3-syzkaller-00399-g9197b73fd7bb #0
Hardware name: Google Compute Engine/Google Compute Engine,
BIOS Google 09/13/2024
Workqueue: infiniband ib_cache_event_task
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
dev_get_flags+0x188/0x1d0 net/core/dev.c:8782
rxe_query_port+0x12d/0x260 drivers/infiniband/sw/rxe/rxe_verbs.c:60
__ib_query_port drivers/infiniband/core/device.c:2111 [inline]
ib_query_port+0x168/0x7d0 drivers/infiniband/core/device.c:2143
ib_cache_update+0x1a9/0xb80 drivers/infiniband/core/cache.c:1494
ib_cache_event_task+0xf3/0x1e0 drivers/infiniband/core/cache.c:1568
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
"
1). In the link [1],
"
infiniband syz2: set down
"
This means that on 839.350575, the event ib_cache_event_task was sent andi
queued in ib_wq.
2). In the link [1],
"
team0 (unregistering): Port device team_slave_0 removed
"
It indicates that before 843.251853, the net device should be freed.
3). In the link [1],
"
BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0
"
This means that on 850.559070, this slab-use-after-free problem occurred.
In all, on 839.350575, the event ib_cache_event_task was sent and queued
in ib_wq,
before 843.251853, the net device veth was freed.
on 850.559070, this event was executed, and the mentioned freed net device
was called. Thus, the above call trace occurred.
[1] https://syzkaller.appspot.com/x/log.txt?x=12e7025f980000
Reported-by: syzbot+4b87489410b4efd181bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4b87489410b4efd181bf
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20241220222325.2487767-1-yanjun.zhu@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Current implementation of fsl_edma3_attach_pd() does not provide a
cleanup path, resulting in a memory leak. For example,
dev_pm_domain_detach() is not called after dev_pm_domain_attach_by_id(),
and the device link created with the DL_FLAG_STATELESS is not released
explicitly.
Therefore, provide a cleanup function fsl_edma3_detach_pd() and call it
upon failure. Also add a devm_add_action_or_reset() call with this
function after a successful fsl_edma3_attach_pd().
Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241221075712.3297200-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If a large count is provided, it will trigger a warning in bitmap_parse_user.
Also check zero for it.
Cc: stable@vger.kernel.org
Fixes: 9e01c1b74c953 ("cpumask: convert kernel trace functions")
Link: https://lore.kernel.org/20241216073238.2573704-1-lizhi.xu@windriver.com
Reported-by: syzbot+0aecfd34fb878546f3fd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0aecfd34fb878546f3fd
Tested-by: syzbot+0aecfd34fb878546f3fd@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The name member of the struct trace_event_call is assigned with
generated string literals; declare them pointer to read-only.
Reported by clang:
security/landlock/syscalls.c:179:1: warning: initializing 'char *' with an expression of type 'const char[34]' discards qualifiers [-Wincompatible-pointer-types-discards-qualifiers]
179 | SYSCALL_DEFINE3(landlock_create_ruleset,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
180 | const struct landlock_ruleset_attr __user *const, attr,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
181 | const size_t, size, const __u32, flags)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/syscalls.h:226:36: note: expanded from macro 'SYSCALL_DEFINE3'
226 | #define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/syscalls.h:234:2: note: expanded from macro 'SYSCALL_DEFINEx'
234 | SYSCALL_METADATA(sname, x, __VA_ARGS__) \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/syscalls.h:184:2: note: expanded from macro 'SYSCALL_METADATA'
184 | SYSCALL_TRACE_ENTER_EVENT(sname); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/syscalls.h:151:30: note: expanded from macro 'SYSCALL_TRACE_ENTER_EVENT'
151 | .name = "sys_enter"#sname, \
| ^~~~~~~~~~~~~~~~~
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Günther Noack <gnoack@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/20241125105028.42807-1-cgoettsche@seltendoof.de
Fixes: b77e38aa240c3 ("tracing: add event trace infrastructure")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fix from Petr Pavlu:
"A single fix is present to correct the module vermagic for PREEMPT_RT"
* tag 'modules-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
preempt: Move PREEMPT_RT before PREEMPT in vermagic.
|
|
The following sysfs entries are reading super block member directly,
which can have a different endian and cause wrong values:
- sys/fs/btrfs/<uuid>/nodesize
- sys/fs/btrfs/<uuid>/sectorsize
- sys/fs/btrfs/<uuid>/clone_alignment
Thankfully those values (nodesize and sectorsize) are always aligned
inside the btrfs_super_block, so it won't trigger unaligned read errors,
just endian problems.
Fix them by using the native cached members instead.
Fixes: df93589a1737 ("btrfs: export more from FS_INFO to sysfs")
CC: stable@vger.kernel.org
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
