summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-04io_uring: don't modify identity's files uncess identity is cowedXiaoguang Wang
Abaci Robot reported following panic: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 800000010ef3f067 P4D 800000010ef3f067 PUD 10d9df067 PMD 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 1869 Comm: io_wqe_worker-0 Not tainted 5.11.0-rc3+ #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:put_files_struct+0x1b/0x120 Code: 24 18 c7 00 f4 ff ff ff e9 4d fd ff ff 66 90 0f 1f 44 00 00 41 57 41 56 49 89 fe 41 55 41 54 55 53 48 83 ec 08 e8 b5 6b db ff 41 ff 0e 74 13 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f e9 9c RSP: 0000:ffffc90002147d48 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88810d9a5300 RCX: 0000000000000000 RDX: ffff88810d87c280 RSI: ffffffff8144ba6b RDI: 0000000000000000 RBP: 0000000000000080 R08: 0000000000000001 R09: ffffffff81431500 R10: ffff8881001be000 R11: 0000000000000000 R12: ffff88810ac2f800 R13: ffff88810af38a00 R14: 0000000000000000 R15: ffff8881057130c0 FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010dbaa002 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __io_clean_op+0x10c/0x2a0 io_dismantle_req+0x3c7/0x600 __io_free_req+0x34/0x280 io_put_req+0x63/0xb0 io_worker_handle_work+0x60e/0x830 ? io_wqe_worker+0x135/0x520 io_wqe_worker+0x158/0x520 ? __kthread_parkme+0x96/0xc0 ? io_worker_handle_work+0x830/0x830 kthread+0x134/0x180 ? kthread_create_worker_on_cpu+0x90/0x90 ret_from_fork+0x1f/0x30 Modules linked in: CR2: 0000000000000000 ---[ end trace c358ca86af95b1e7 ]--- I guess case below can trigger above panic: there're two threads which operates different io_uring ctxs and share same sqthread identity, and later one thread exits, io_uring_cancel_task_requests() will clear task->io_uring->identity->files to be NULL in sqpoll mode, then another ctx that uses same identity will panic. Indeed we don't need to clear task->io_uring->identity->files here, io_grab_identity() should handle identity->files changes well, if task->io_uring->identity->files is not equal to current->files, io_cow_identity() should handle this changes well. Cc: stable@vger.kernel.org # 5.5+ Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-04KVM: x86/mmu: Fix TDP MMU zap collapsible SPTEsBen Gardon
There is a bug in the TDP MMU function to zap SPTEs which could be replaced with a larger mapping which prevents the function from doing anything. Fix this by correctly zapping the last level SPTEs. Cc: stable@vger.kernel.org Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU") Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210202185734.1680553-11-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-03selftests/tls: fix selftest with CHACHA20-POLY1305Vadim Fedorenko
TLS selftests were broken also because of use of structure that was not exported to UAPI. Fix by defining the union in tests. Fixes: 4f336e88a870 (selftests/tls: add CHACHA20-POLY1305 to tls selftests) Reported-by: Rong Chen <rong.a.chen@intel.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1612384634-5377-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04Merge tag 'drm-misc-fixes-2021-02-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * drm/bridge/lontium-lt9611uxc: EDID fixes; Don't handle hotplug events in IRQ handler * drm/ttm: Use _GFP_NOWARN for huge pages Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YBlHU4sc/5GHpXpg@linux-uq9g
2021-02-03net/qrtr: restrict user-controlled length in qrtr_tun_write_iter()Sabyrzhan Tasbolatov
syzbot found WARNING in qrtr_tun_write_iter [1] when write_iter length exceeds KMALLOC_MAX_SIZE causing order >= MAX_ORDER condition. Additionally, there is no check for 0 length write. [1] WARNING: mm/page_alloc.c:5011 [..] Call Trace: alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267 alloc_pages include/linux/gfp.h:547 [inline] kmalloc_order+0x2e/0xb0 mm/slab_common.c:837 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:682 [inline] qrtr_tun_write_iter+0x8a/0x180 net/qrtr/tun.c:83 call_write_iter include/linux/fs.h:1901 [inline] Reported-by: syzbot+c2a7e5c5211605a90865@syzkaller.appspotmail.com Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com> Link: https://lore.kernel.org/r/20210202092059.1361381-1-snovitoll@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04netfilter: flowtable: fix tcp and udp header checksum updateSven Auhagen
When updating the tcp or udp header checksum on port nat the function inet_proto_csum_replace2 with the last parameter pseudohdr as true. This leads to an error in the case that GRO is used and packets are split up in GSO. The tcp or udp checksum of all packets is incorrect. The error is probably masked due to the fact the most network driver implement tcp/udp checksum offloading. It also only happens when GRO is applied and not on single packets. The error is most visible when using a pppoe connection which is not triggering the tcp/udp checksum offload. Fixes: ac2a66665e23 ("netfilter: add generic flow table infrastructure") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-04netfilter: nftables: fix possible UAF over chains from packet path in netnsPablo Neira Ayuso
Although hooks are released via call_rcu(), chain and rule objects are immediately released while packets are still walking over these bits. This patch adds the .pre_exit callback which is invoked before synchronize_rcu() in the netns framework to stay safe. Remove a comment which is not valid anymore since the core does not use synchronize_net() anymore since 8c873e219970 ("netfilter: core: free hooks with call_rcu"). Suggested-by: Florian Westphal <fw@strlen.de> Fixes: df05ef874b28 ("netfilter: nf_tables: release objects on netns destruction") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-04selftests: netfilter: fix current yearFabian Frederick
use date %Y instead of %G to read current year Problem appeared when running lkp-tests on 01/01/2021 Fixes: 48d072c4e8cd ("selftests: netfilter: add time counter check") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-04netfilter: xt_recent: Fix attempt to update deleted entryJozsef Kadlecsik
When both --reap and --update flag are specified, there's a code path at which the entry to be updated is reaped beforehand, which then leads to kernel crash. Reap only entries which won't be updated. Fixes kernel bugzilla #207773. Link: https://bugzilla.kernel.org/show_bug.cgi?id=207773 Reported-by: Reindl Harald <h.reindl@thelounge.net> Fixes: 0079c5aee348 ("netfilter: xt_recent: add an entry reaper") Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-03NET: usb: qmi_wwan: Adding support for Cinterion MV31Christoph Schemmel
Adding support for Cinterion MV31 with PID 0x00B7. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b7 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Christoph Schemmel <christoph.schemmel@gmail.com> Link: https://lore.kernel.org/r/20210202084523.4371-1-christoph.schemmel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04drm/nouveau: fix dma syncing warning with debugging on.Dave Airlie
Since I wrote the below patch if you run a debug kernel you can a dma debug warning like: nouveau 0000:1f:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000016e012000] [size=4096 bytes] The old nouveau code wasn't consolidate the pages like the ttm code, but the dma-debug expects the sync code to give it the same base/range pairs as the allocator. Fix the nouveau sync code to consolidate pages before calling the sync code. Fixes: bd549d35b4be0 ("nouveau: use ttm populate mapping functions. (v2)") Reported-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/417588/
2021-02-03bpf: Check for integer overflow when using roundup_pow_of_two()Bui Quang Minh
On 32-bit architecture, roundup_pow_of_two() can return 0 when the argument has upper most bit set due to resulting 1UL << 32. Add a check for this case. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210127063653.3576-1-minhquangbui99@gmail.com
2021-02-03drm/dp_mst: Don't report ports connected if nothing is attached to themImre Deak
Reporting a port as connected if nothing is attached to them leads to any i2c transactions on this port trying to use an uninitialized i2c adapter, fix this. Let's account for this case even if branch devices have no good reason to report a port as plugged with their peer device type set to 'none'. Fixes: db1a07956968 ("drm/dp_mst: Handle SST-only branch device case") References: https://gitlab.freedesktop.org/drm/intel/-/issues/2987 References: https://gitlab.freedesktop.org/drm/intel/-/issues/1963 Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v5.5+ Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reported-by: Thiago Macieira <gitlab@gitlab.freedesktop.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-1-imre.deak@intel.com
2021-02-03Merge tag 'for-linus-5.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger: - Make sure to set a default console, otherwise ttynull is selected - Revert initial ARCH_HAS_SET_MEMORY support, this needs more work - Fix a regression due to ubd refactoring - Various small fixes * tag 'for-linus-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: time: fix initialization in time-travel mode um: fix os_idle_sleep() to not hang Revert "um: support some of ARCH_HAS_SET_MEMORY" Revert "um: allocate a guard page to helper threads" um: virtio: free vu_dev only with the contained struct device um: kmsg_dumper: always dump when not tty console um: stdio_console: Make preferred console um: return error from ioremap() um: ubd: fix command line handling of ubd
2021-02-03Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Fix the arm64 linear map range detection for tagged addresses and replace the bitwise operations with subtract (virt_addr_valid(), __is_lm_address(), __lm_to_phys())" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Use simpler arithmetics for the linear map macros arm64: Do not pass tagged addresses to __is_lm_address()
2021-02-03Merge tag 'trace-v5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Initialize tracing-graph-pause at task creation, not start of function tracing, to avoid corrupting the pause counter. - Set "pause-on-trace" for latency tracers as that option breaks their output (regression). - Fix the wrong error return for setting kretprobes on future modules (before they are loaded). - Fix re-registering the same kretprobe. - Add missing value check for added RCU variable reload. * tag 'trace-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracepoint: Fix race between tracing and removing tracepoint kretprobe: Avoid re-registration of the same kretprobe earlier tracing/kprobe: Fix to support kretprobe events on unloaded modules tracing: Use pause-on-trace with the latency tracers fgraph: Initialize tracing_graph_pause at task creation
2021-02-03Merge tag 'arm-soc-fixes-v5.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The code fixes in this round are all for the Texas Instruments OMAP platform, addressing several regressions related to the ti-sysc interconnect changes that was merged in linux-5.11 and one recently introduced RCU usage warning. Tero Kristo updates his maintainer file entries as he is changing to a new employer. The other changes are for devicetree files across eight different platforms: TI OMAP: - multiple gpio related one-line fixes Allwinner/sunxi: - ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode - soc: sunxi: mbus: Remove DE2 display engine compatibles NXP lpc32xx: - ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL STMicroelectronics stm32 - multiple minor fixes for DHCOM/DHCOR boards NXP Layerscape: - Fix DCFG address range on LS1046A SoC Amlogic meson: - fix reboot issue on odroid C4 - revert an ethernet change that caused a regression - meson-g12: Set FL-adj property value Rockchip: - multiple minor fixes on 64-bit rockchip machines Qualcomm: - Regression fixes for Lenovo Yoga touchpad and for interconnect configuration - Boot fixes for 'LPASS' clock configuration on two machines" * tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode arm64: dts: ls1046a: fix dcfg address range soc: sunxi: mbus: Remove DE2 display engine compatibles arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4 Revert "arm64: dts: amlogic: add missing ethernet reset ID" arm64: dts: rockchip: Disable display for NanoPi R2S ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4 arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02 ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX ARM: dts: stm32: Fix GPIO hog names on DHCOM ARM: dts: stm32: Disable optional TSC2004 on DRC02 board ARM: dts: stm32: Disable WP on DHCOM uSD slot ARM: dts: stm32: Connect card-detect signal on DHCOM ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc ...
2021-02-03Merge tag 'gpio-fixes-for-v5.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "Some more fixes from the GPIO subsystem for this release. This time it's only core fixes: - fix a memory leak in error path in gpiolib - clear debounce period in output mode in the character device code - remove shadowed variable" * tag 'gpio-fixes-for-v5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: gpiolib: remove shadowed variable gpiolib: free device name on error path to fix kmemleak gpiolib: cdev: clear debounce period if line set to output
2021-02-03Merge tag 'platform-drivers-x86-v5.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Two last minute small but important fixes. The hp-wmi change fixes an issue which is actively being hit by users: https://bugzilla.redhat.com/show_bug.cgi?id=1918255 https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3564 And the dell-wmi-sysman patch fixes a bug in the new dell-wmi-sysman driver which causes some systems to hang at boot when the driver loads" * tag 'platform-drivers-x86-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: dell-wmi-sysman: fix a NULL pointer dereference platform/x86: hp-wmi: Disable tablet-mode reporting by default
2021-02-03nvmet-tcp: fix out-of-bounds access when receiving multiple h2cdata PDUsSagi Grimberg
When the host sends multiple h2cdata PDUs, we keep track on the receive progress and calculate the scatterlist index and offsets. The issue is that sg_offset should only be kept for the first iov entry we map in the iovec as this is the difference between our cursor and the sg entry offset itself. In addition, the sg index was calculated wrong because we should not round up when dividing the command byte offset with PAG_SIZE. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Reported-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com> Tested-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-03bpf: Unbreak BPF_PROG_TYPE_KPROBE when kprobe is called via do_int3Alexei Starovoitov
The commit 0d00449c7a28 ("x86: Replace ist_enter() with nmi_enter()") converted do_int3 handler to be "NMI-like". That made old if (in_nmi()) check abort execution of bpf programs attached to kprobe when kprobe is firing via int3 (For example when kprobe is placed in the middle of the function). Remove the check to restore user visible behavior. Fixes: 0d00449c7a28 ("x86: Replace ist_enter() with nmi_enter()") Reported-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/bpf/20210203070636.70926-1-alexei.starovoitov@gmail.com
2021-02-03xhci: fix bounce buffer usage for non-sg list caseMathias Nyman
xhci driver may in some special cases need to copy small amounts of payload data to a bounce buffer in order to meet the boundary and alignment restrictions set by the xHCI specification. In the majority of these cases the data is in a sg list, and driver incorrectly assumed data is always in urb->sg when using the bounce buffer. If data instead is contiguous, and in urb->transfer_buffer, we may still need to bounce buffer a small part if data starts very close (less than packet size) to a 64k boundary. Check if sg list is used before copying data to/from it. Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210203113702.436762-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03dmaengine: idxd: check device state before issue commandDave Jiang
Add device state check before executing command. Without the check the command can be issued while device is in halt state and causes the driver to block while waiting for the completion of the command. Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Fixes: 0d5c10b4c84d ("dmaengine: idxd: add work queue drain support") Link: https://lore.kernel.org/r/161219313921.2976211.12222625226450097465.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-03tools/power/turbostat: Fallback to an MSR read for EPBBorislav Petkov
Commit 6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs") converted turbostat to read the energy_perf_bias value from sysfs. However, older kernels which do not have that file yet, would fail. For those, fall back to the MSR reading. Fixes: 6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs") Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Link: https://lkml.kernel.org/r/20210127132444.981120-1-dedekind1@gmail.com
2021-02-03drm/xlnx: fix kmemleak by sending vblank_event in atomic_disableQuanyang Wang
When running xrandr to change resolution of DP, the kmemleak as below can be observed: unreferenced object 0xffff00080a351000 (size 256): comm "Xorg", pid 248, jiffies 4294899614 (age 19.960s) hex dump (first 32 bytes): 98 a0 bc 01 08 00 ff ff 01 00 00 00 00 00 00 00 ................ ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e0bd0f69>] kmemleak_alloc+0x30/0x40 [<00000000cde2f318>] kmem_cache_alloc+0x3d4/0x588 [<0000000088ea9bd7>] drm_atomic_helper_setup_commit+0x84/0x5f8 [<000000002290a264>] drm_atomic_helper_commit+0x58/0x388 [<00000000f6ea78c3>] drm_atomic_commit+0x4c/0x60 [<00000000c8e0725e>] drm_atomic_connector_commit_dpms+0xe8/0x110 [<0000000020ade187>] drm_mode_obj_set_property_ioctl+0x1b0/0x450 [<00000000918206d6>] drm_connector_property_set_ioctl+0x3c/0x68 [<000000008d51e7a5>] drm_ioctl_kernel+0xc4/0x118 [<000000002a819b75>] drm_ioctl+0x214/0x448 [<000000008ca4e588>] __arm64_sys_ioctl+0xa8/0xf0 [<0000000034e15a35>] el0_svc_common.constprop.0+0x74/0x190 [<000000001b93d916>] do_el0_svc+0x24/0x90 [<00000000ce9230e0>] el0_svc+0x14/0x20 [<00000000e3607d82>] el0_sync_handler+0xb0/0xb8 [<000000003e79c15f>] el0_sync+0x174/0x180 This is because there is a scenario that a drm_crtc_commit commit is allocated but not freed. The drm subsystem require/release references to a CRTC commit by calling drm_crtc_commit_get/put, and when drm_crtc_commit_put find that commit.ref.refcount is zero, it will call __drm_crtc_commit_free to free this CRTC commit. Among these drm_crtc_commit_get/put pairs, there is a drm_crtc_commit_get in drm_atomic_helper_setup_commit as below: ... new_crtc_state->event->base.completion = &commit->flip_done; new_crtc_state->event->base.completion_release = release_crtc_commit; drm_crtc_commit_get(commit); ... This reference to the CRTC commit should be released at the function release_crtc_commit by calling e->completion_release(e->completion) in drm_send_event_locked. So we need to call drm_send_event_locked at two places: handling vblank event in the irq handler and the crtc disable helper. But in zynqmp_disp_crtc_atomic_disable, it only marks the flip is done and not call drm_crtc_commit_put. This result that the refcount of this commit is always non-zero and this commit will never be freed. Since the function drm_crtc_send_vblank_event has operations both sending a flip_done signal and releasing reference to the CRTC commit, let's use it instead. Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210202064121.173362-1-quanyang.wang@windriver.com
2021-02-03usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720Pali Rohár
Older ATF does not provide SMC call for USB 3.0 phy power on functionality and therefore initialization of xhci-hcd is failing when older version of ATF is used. In this case phy_power_on() function returns -EOPNOTSUPP. [ 3.108467] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware [ 3.117250] phy phy-d0018300.phy.0: phy poweron failed --> -95 [ 3.123465] xhci-hcd: probe of d0058000.usb failed with error -95 This patch introduces a new plat_setup callback for xhci platform drivers which is called prior calling usb_add_hcd() function. This function at its beginning skips PHY init if hcd->skip_phy_initialization is set. Current init_quirk callback for xhci platform drivers is called from xhci_plat_setup() function which is called after chip reset completes. It happens in the middle of the usb_add_hcd() function and therefore this callback cannot be used for setting if PHY init should be skipped or not. For Armada 3720 this patch introduce a new xhci_mvebu_a3700_plat_setup() function configured as a xhci platform plat_setup callback. This new function calls phy_power_on() and in case it returns -EOPNOTSUPP then XHCI_SKIP_PHY_INIT quirk is set to instruct xhci-plat to skip PHY initialization. This patch fixes above failure by ignoring 'not supported' error in xhci-hcd driver. In this case it is expected that phy is already power on. It fixes initialization of xhci-hcd on Espressobin boards where is older Marvell's Arm Trusted Firmware without SMC call for USB 3.0 phy power. This is regression introduced in commit bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") where USB 3.0 phy was defined and therefore xhci-hcd on Espressobin with older ATF started failing. Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") Cc: <stable@vger.kernel.org> # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno Cc: <stable@vger.kernel.org> # 5.1+: f768e718911e: usb: host: xhci-plat: add priv quirk for skip PHY initialization Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # On R-Car Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # xhci-plat Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210201150803.7305-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03Merge tag 'sunxi-fixes-for-5.11-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes One fix for a phy-mode ethernet issue, and one to fix the display output on SoCs with the Display Engine 2 * tag 'sunxi-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode soc: sunxi: mbus: Remove DE2 display engine compatibles Link: https://lore.kernel.org/r/f8298059-f9ca-43b4-9e29-35bc0e0c9b15.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-03ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLLAlexandre Belloni
This reverts commit c17e9377aa81664d94b4f2102559fcf2a01ec8e7. The lpc32xx clock driver is not able to actually change the PLL rate as this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK, then stop the PLL, update the register, restart the PLL and wait for the PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK PLL. Currently, the HCLK driver simply updates the registers but this has no real effect and all the clock rate calculation end up being wrong. This is especially annoying for the peripheral (e.g. UARTs, I2C, SPI). Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20210203090320.GA3760268@piout.net' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-03ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-modeHermann Lauer
BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high packet loss rates. The realtek phy driver overrides the settings of the pull ups for the delays, so fix this for BananaPro. Fix the phy-mode description to correctly reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board") Signed-off-by: Hermann Lauer <Hermann.Lauer@uni-heidelberg.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210128111842.GA11919@lemon.iwr.uni-heidelberg.de
2021-02-03KVM: x86: cleanup CR3 reserved bits checksPaolo Bonzini
If not in long mode, the low bits of CR3 are reserved but not enforced to be zero, so remove those checks. If in long mode, however, the MBZ bits extend down to the highest physical address bit of the guest, excluding the encryption bit. Make the checks consistent with the above, and match them between nested_vmcb_checks and KVM_SET_SREGS. Cc: stable@vger.kernel.org Fixes: 761e41693465 ("KVM: nSVM: Check that MBZ bits in CR3 and CR4 are not set on vmrun of nested guests") Fixes: a780a3ea6282 ("KVM: X86: Fix reserved bits check for MOV to CR3") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-03KVM: SVM: Treat SVM as unsupported when running as an SEV guestSean Christopherson
Don't let KVM load when running as an SEV guest, regardless of what CPUID says. Memory is encrypted with a key that is not accessible to the host (L0), thus it's impossible for L0 to emulate SVM, e.g. it'll see garbage when reading the VMCB. Technically, KVM could decrypt all memory that needs to be accessible to the L0 and use shadow paging so that L0 does not need to shadow NPT, but exposing such information to L0 largely defeats the purpose of running as an SEV guest. This can always be revisited if someone comes up with a use case for running VMs inside SEV guests. Note, VMLOAD, VMRUN, etc... will also #GP on GPAs with C-bit set, i.e. KVM is doomed even if the SEV guest is debuggable and the hypervisor is willing to decrypt the VMCB. This may or may not be fixed on CPUs that have the SVME_ADDR_CHK fix. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210202212017.2486595-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-02bfq-iosched: Revert "bfq: Fix computation of shallow depth"Lin Feng
This reverts commit 6d4d273588378c65915acaf7b2ee74e9dd9c130a. bfq.limit_depth passes word_depths[] as shallow_depth down to sbitmap core sbitmap_get_shallow, which uses just the number to limit the scan depth of each bitmap word, formula: scan_percentage_for_each_word = shallow_depth / (1 << sbimap->shift) * 100% That means the comments's percentiles 50%, 75%, 18%, 37% of bfq are correct. But after commit patch 'bfq: Fix computation of shallow depth', we use sbitmap.depth instead, as a example in following case: sbitmap.depth = 256, map_nr = 4, shift = 6; sbitmap_word.depth = 64. The resulsts of computed bfqd->word_depths[] are {128, 192, 48, 96}, and three of the numbers exceed core dirver's 'sbitmap_word.depth=64' limit nothing. Signed-off-by: Lin Feng <linf@wangsu.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-02RISC-V: Define MAXPHYSMEM_1GB only for RV32Atish Patra
MAXPHYSMEM_1GB option was added for RV32 because RV32 only supports 1GB of maximum physical memory. This lead to few compilation errors reported by kernel test robot which created the following configuration combination which are not useful but can be configured. 1. MAXPHYSMEM_1GB & RV64 2, MAXPHYSMEM_2GB & RV32 Fix this by restricting MAXPHYSMEM_1GB for RV32 and MAXPHYSMEM_2GB only for RV64. Fixes: e557793799c5 ("RISC-V: Fix maximum allowed phsyical memory for RV32") Cc: stable@vger.kernel.org Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-02riscv: Align on L1_CACHE_BYTES when STRICT_KERNEL_RWXSebastien Van Cauwenberghe
Allows the sections to be aligned on smaller boundaries and therefore results in a smaller kernel image size. Signed-off-by: Sebastien Van Cauwenberghe <svancau@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-02RISC-V: Fix .init section permission updateAtish Patra
.init section permission should only updated to non-execute if STRICT_KERNEL_RWX is enabled. Otherwise, this will lead to a kernel hang. Fixes: 19a00869028f ("RISC-V: Protect all kernel sections including init early") Cc: stable@vger.kernel.org Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-02riscv: virt_addr_valid must check the address belongs to linear mappingAlexandre Ghiti
virt_addr_valid macro checks that a virtual address is valid, ie that the address belongs to the linear mapping and that the corresponding physical page exists. Add the missing check that ensures the virtual address belongs to the linear mapping, otherwise __virt_to_phys, when compiled with CONFIG_DEBUG_VIRTUAL enabled, raises a WARN that is interpreted as a kernel bug by syzbot. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-03scripts/clang-tools: switch explicitly to Python 3Masahiro Yamada
For the same reason as commit 51839e29cb59 ("scripts: switch explicitly to Python 3"), switch some more scripts, which I tested and confirmed working on Python 3. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nathan Chancellor <nathan@kernel.org>
2021-02-02drm/amd/display: Decrement refcount of dc_sink before reassignmentVictor Lu
[why] An old dc_sink state is causing a memory leak because it is missing a dc_sink_release before a new dc_sink is assigned back to aconnector->dc_sink. [how] Decrement the dc_sink refcount before reassigning it to a new dc_sink. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Free atomic state after drm_atomic_commitVictor Lu
[why] drm_atomic_commit was changed so that the caller must free their drm_atomic_state reference on successes. [how] Add drm_atomic_commit_put after drm_atomic_commit call in dm_force_atomic_commit. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix dc_sink kref count in emulated_link_detectVictor Lu
[why] prev_sink is not used anywhere else in the function and the reference to it from dc_link is replaced with a new dc_sink. [how] Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink). Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Release DSC before acquiringMikita Lipski
[why] Need to unassign DSC from pipes that are not using it so other pipes can acquire it. That is needed for asic's that have unmatching number of DSC engines from the number of pipes. [how] Before acquiring dsc to stream resources, first remove it. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Eryk Brol <Eryk.Brol@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Revert "Fix EDID parsing after resume from suspend"Stylon Wang
This reverts commit b24bdc37d03a0478189e20a50286092840f414fa. It caused memory leak after S3 on 4K HDMI displays. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-02drm/amd/display: Add more Clock Sources to DCN2.1Sung Lee
[WHY] When enabling HDMI on ComboPHY, there are not enough clock sources to complete display detection. [HOW] Initialize more clock sources. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: reuse current context instead of recreating oneBhawanpreet Lakha
[Why] Currently we discard the current context and recreate it. The current context is what is applied to the HW so we should be re-using this rather than creating a new context. Recreating the context can lead to mismatch between new context and the current context For example: gsl groups get changed when we create a new context this can cause issues in a multi display config (with flip immediate) because we don't align the existing gsl groups in the new and current context. If we reuse the current context the gsl group assignment stays the same. [How] Instead of discarding the current context, we instead just copy the current state and add/remove planes and streams. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix DPCD translation for LTTPR AUX_RD_INTERVALGeorge Shen
[Why] The translation between the DPCD value and the specified AUX_RD_INTERVAL in the DP spec do not match. [How] Update values to match the spec. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu: enable freesync for A+A configsChristian König
Some newer APUs can scanout directly from GTT, that saves us from allocating another bounce buffer in VRAM and enables freesync in such configurations. Without this patch creating a framebuffer from the imported BO will fail and userspace will fall back to a copy. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/pm: fill in the data member of v2 gpu metrics table for vangoghXiaojian Du
This patch is to fill in the data member of v2 gpu metrics table for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdgpu/gfx10: update CGTS_TCC_DISABLE and CGTS_USER_TCC_DISABLE register ↵chen gong
offsets for VGH For Vangogh: The offset of the CGTS_TCC_DISABLE is 0x5006 by calculation. The offset of the CGTS_USER_TCC_DISABLE is 0x5007 by calculation. Signed-off-by: chen gong <curry.gong@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amdkfd: fix null pointer panic while free buffer in kfdHuang Rui
In drm_gem_object_free, it will call funcs of drm buffer obj. So kfd_alloc should use amdgpu_gem_object_create instead of amdgpu_bo_create to initialize the funcs as amdgpu_gem_object_funcs. [ 396.231390] amdgpu: Release VA 0x7f76b4ada000 - 0x7f76b4add000 [ 396.231394] amdgpu: remove VA 0x7f76b4ada000 - 0x7f76b4add000 in entry 0000000085c24a47 [ 396.231408] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 396.231445] #PF: supervisor read access in kernel mode [ 396.231466] #PF: error_code(0x0000) - not-present page [ 396.231484] PGD 0 P4D 0 [ 396.231495] Oops: 0000 [#1] SMP NOPTI [ 396.231509] CPU: 7 PID: 1352 Comm: clinfo Tainted: G OE 5.11.0-rc2-custom #1 [ 396.231537] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS WCD0401N_Weekly_20_04_0 04/01/2020 [ 396.231563] RIP: 0010:drm_gem_object_free+0xc/0x22 [drm] [ 396.231606] Code: eb ec 48 89 c3 eb e7 0f 1f 44 00 00 55 48 89 e5 48 8b bf 00 06 00 00 e8 72 0d 01 00 5d c3 0f 1f 44 00 00 48 8b 87 40 01 00 00 <48> 8b 00 48 85 c0 74 0b 55 48 89 e5 e8 54 37 7c db 5d c3 0f 0b c3 [ 396.231666] RSP: 0018:ffffb4704177fcf8 EFLAGS: 00010246 [ 396.231686] RAX: 0000000000000000 RBX: ffff993a0d0cc400 RCX: 0000000000003113 [ 396.231711] RDX: 0000000000000001 RSI: e9cda7a5d0791c6d RDI: ffff993a333a9058 [ 396.231736] RBP: ffffb4704177fdd0 R08: ffff993a03855858 R09: 0000000000000000 [ 396.231761] R10: ffff993a0d1f7158 R11: 0000000000000001 R12: 0000000000000000 [ 396.231785] R13: ffff993a0d0cc428 R14: 0000000000003000 R15: ffffb4704177fde0 [ 396.231811] FS: 00007f76b5730740(0000) GS:ffff993b275c0000(0000) knlGS:0000000000000000 [ 396.231840] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 396.231860] CR2: 0000000000000000 CR3: 000000016d2e2000 CR4: 0000000000350ee0 [ 396.231885] Call Trace: [ 396.231897] ? amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x24c/0x25f [amdgpu] [ 396.232056] ? __dynamic_dev_dbg+0xcd/0x100 [ 396.232076] kfd_ioctl_free_memory_of_gpu+0x91/0x102 [amdgpu] [ 396.232214] kfd_ioctl+0x211/0x35b [amdgpu] [ 396.232341] ? kfd_ioctl_get_queue_wave_state+0x52/0x52 [amdgpu] Fixes: 246cb7e49a70 ("drm/amdgpu: Introduce GEM object functions") Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Changfeng <changzhu@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-02drm/amdgpu: fix the issue that retry constantly once the buffer is oversizeHuang Rui
We cannot modify initial_domain every time while the retry starts. That will cause the busy waiting that unable to switch to GTT while the vram is not enough. Fixes: f8aab60422c3 ("drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs") Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 22:34:38 +0000