summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-04iomap: partially revert 4721a601099 (simulated directio short read on EFAULT)Darrick J. Wong
In commit 4721a601099, we tried to fix a problem wherein directio reads into a splice pipe will bounce EFAULT/EAGAIN all the way out to userspace by simulating a zero-byte short read. This happens because some directio read implementations (xfs) will call bio_iov_iter_get_pages to grab pipe buffer pages and issue asynchronous reads, but as soon as we run out of pipe buffers that _get_pages call returns EFAULT, which the splice code translates to EAGAIN and bounces out to userspace. In that commit, the iomap code catches the EFAULT and simulates a zero-byte read, but that causes assertion errors on regular splice reads because xfs doesn't allow short directio reads. This causes infinite splice() loops and assertion failures on generic/095 on overlayfs because xfs only permit total success or total failure of a directio operation. The underlying issue in the pipe splice code has now been fixed by changing the pipe splice loop to avoid avoid reading more data than there is space in the pipe. Therefore, it's no longer necessary to simulate the short directio, so remove the hack from iomap. Fixes: 4721a601099 ("iomap: dio data corruption and spurious errors when pipes fill") Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Ranted-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-12-04Merge branch 'parisc-4.20-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "On parisc, use -ffunction-sections compiler option when building 32-bit kernel modules to avoid sysfs-warnings when loading such modules. This got broken with kernel v4.18" * 'parisc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable -ffunction-sections for modules on 32-bit kernel
2018-12-04splice: don't read more than available pipe spaceDarrick J. Wong
In commit 4721a601099, we tried to fix a problem wherein directio reads into a splice pipe will bounce EFAULT/EAGAIN all the way out to userspace by simulating a zero-byte short read. This happens because some directio read implementations (xfs) will call bio_iov_iter_get_pages to grab pipe buffer pages and issue asynchronous reads, but as soon as we run out of pipe buffers that _get_pages call returns EFAULT, which the splice code translates to EAGAIN and bounces out to userspace. In that commit, the iomap code catches the EFAULT and simulates a zero-byte read, but that causes assertion errors on regular splice reads because xfs doesn't allow short directio reads. The brokenness is compounded by splice_direct_to_actor immediately bailing on do_splice_to returning <= 0 without ever calling ->actor (which empties out the pipe), so if userspace calls back we'll EFAULT again on the full pipe, and nothing ever gets copied. Therefore, teach splice_direct_to_actor to clamp its requests to the amount of free space in the pipe and remove the simulated short read from the iomap directio code. Fixes: 4721a601099 ("iomap: dio data corruption and spurious errors when pipes fill") Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Ranted-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-12-04vfs: allow some remap flags to be passed to vfs_clone_file_rangeDarrick J. Wong
In overlayfs, ovl_remap_file_range calls vfs_clone_file_range on the lower filesystem's inode, passing through whatever remap flags it got from its caller. Since vfs_copy_file_range first tries a filesystem's remap function with REMAP_FILE_CAN_SHORTEN, this can get passed through to the second vfs_copy_file_range call, and this isn't an issue. Change the WARN_ON to look only for the DEDUP flag. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-12-04xfs: fix inverted return from xfs_btree_sblock_verify_crcEric Sandeen
xfs_btree_sblock_verify_crc is a bool so should not be returning a failaddr_t; worse, if xfs_log_check_lsn fails it returns __this_address which looks like a boolean true (i.e. success) to the caller. (interestingly xfs_btree_lblock_verify_crc doesn't have the issue) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-12-04xfs: fix PAGE_MASK usage in xfs_free_file_spaceDarrick J. Wong
In commit e53c4b598, I *tried* to teach xfs to force writeback when we fzero/fpunch right up to EOF so that if EOF is in the middle of a page, the post-EOF part of the page gets zeroed before we return to userspace. Unfortunately, I missed the part where PAGE_MASK is ~(PAGE_SIZE - 1), which means that we totally fail to zero if we're fpunching and EOF is within the first page. Worse yet, the same PAGE_MASK thinko plagues the filemap_write_and_wait_range call, so we'd initiate writeback of the entire file, which (mostly) masked the thinko. Drop the tricky PAGE_MASK and replace it with correct usage of PAGE_SIZE and the proper rounding macros. Fixes: e53c4b598 ("xfs: ensure post-EOF zeroing happens after zeroing part of a file") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-12-04phy: Revert toggling reset changes.David S. Miller
This reverts: ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached") 8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not attached") Andrew Lunn informs me that there are alternative efforts underway to fix this more properly. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: omap-keypad - fix keyboard debounce configuration Input: xpad - quirk all PDP Xbox One gamepads Input: synaptics - enable SMBus for HP 15-ay000 Input: synaptics - add PNP ID for ThinkPad P50 to SMBus Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR Input: elan_i2c - add support for ELAN0621 touchpad Input: hyper-v - fix wakeup from suspend-to-idle Input: atkbd - clean up indentation issue Input: st1232 - convert to SPDX identifiers Input: migor_ts - convert to SPDX identifiers Input: dt-bindings - fix a typo in file input-reset.txt Input: cros_ec_keyb - fix button/switch capability reports Input: elan_i2c - add ELAN0620 to the ACPI table Input: matrix_keypad - check for errors from of_get_named_gpio()
2018-12-04Merge branch 'bpf-verifier-resilience'Daniel Borkmann
Alexei Starovoitov says: ==================== Three patches to improve verifier ability to handle pathological bpf programs with a lot of branches: - make sure prog_load syscall can be aborted - improve branch taken analysis - introduce per-insn complexity limit for unprivileged programs ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-04bpf: add per-insn complexity limitAlexei Starovoitov
malicious bpf program may try to force the verifier to remember a lot of distinct verifier states. Put a limit to number of per-insn 'struct bpf_verifier_state'. Note that hitting the limit doesn't reject the program. It potentially makes the verifier do more steps to analyze the program. It means that malicious programs will hit BPF_COMPLEXITY_LIMIT_INSNS sooner instead of spending cpu time walking long link list. The limit of BPF_COMPLEXITY_LIMIT_STATES==64 affects cilium progs with slight increase in number of "steps" it takes to successfully verify the programs: before after bpf_lb-DLB_L3.o 1940 1940 bpf_lb-DLB_L4.o 3089 3089 bpf_lb-DUNKNOWN.o 1065 1065 bpf_lxc-DDROP_ALL.o 28052 | 28162 bpf_lxc-DUNKNOWN.o 35487 | 35541 bpf_netdev.o 10864 10864 bpf_overlay.o 6643 6643 bpf_lcx_jit.o 38437 38437 But it also makes malicious program to be rejected in 0.4 seconds vs 6.5 Hence apply this limit to unprivileged programs only. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-04bpf: improve verifier branch analysisAlexei Starovoitov
pathological bpf programs may try to force verifier to explode in the number of branch states: 20: (d5) if r1 s<= 0x24000028 goto pc+0 21: (b5) if r0 <= 0xe1fa20 goto pc+2 22: (d5) if r1 s<= 0x7e goto pc+0 23: (b5) if r0 <= 0xe880e000 goto pc+0 24: (c5) if r0 s< 0x2100ecf4 goto pc+0 25: (d5) if r1 s<= 0xe880e000 goto pc+1 26: (c5) if r0 s< 0xf4041810 goto pc+0 27: (d5) if r1 s<= 0x1e007e goto pc+0 28: (b5) if r0 <= 0xe86be000 goto pc+0 29: (07) r0 += 16614 30: (c5) if r0 s< 0x6d0020da goto pc+0 31: (35) if r0 >= 0x2100ecf4 goto pc+0 Teach verifier to recognize always taken and always not taken branches. This analysis is already done for == and != comparison. Expand it to all other branches. It also helps real bpf programs to be verified faster: before after bpf_lb-DLB_L3.o 2003 1940 bpf_lb-DLB_L4.o 3173 3089 bpf_lb-DUNKNOWN.o 1080 1065 bpf_lxc-DDROP_ALL.o 29584 28052 bpf_lxc-DUNKNOWN.o 36916 35487 bpf_netdev.o 11188 10864 bpf_overlay.o 6679 6643 bpf_lcx_jit.o 39555 38437 Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-04bpf: check pending signals while verifying programsAlexei Starovoitov
Malicious user space may try to force the verifier to use as much cpu time and memory as possible. Hence check for pending signals while verifying the program. Note that suspend of sys_bpf(PROG_LOAD) syscall will lead to EAGAIN, since the kernel has to release the resources used for program verification. Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-04Revert "exec: make de_thread() freezable"Rafael J. Wysocki
Revert commit c22397888f1e "exec: make de_thread() freezable" as requested by Ingo Molnar: "So there's a new regression in v4.20-rc4, my desktop produces this lockdep splat: [ 1772.588771] WARNING: pkexec/4633 still has locks held! [ 1772.588773] 4.20.0-rc4-custom-00213-g93a49841322b #1 Not tainted [ 1772.588775] ------------------------------------ [ 1772.588776] 1 lock held by pkexec/4633: [ 1772.588778] #0: 00000000ed85fbf8 (&sig->cred_guard_mutex){+.+.}, at: prepare_bprm_creds+0x2a/0x70 [ 1772.588786] stack backtrace: [ 1772.588789] CPU: 7 PID: 4633 Comm: pkexec Not tainted 4.20.0-rc4-custom-00213-g93a49841322b #1 [ 1772.588792] Call Trace: [ 1772.588800] dump_stack+0x85/0xcb [ 1772.588803] flush_old_exec+0x116/0x890 [ 1772.588807] ? load_elf_phdrs+0x72/0xb0 [ 1772.588809] load_elf_binary+0x291/0x1620 [ 1772.588815] ? sched_clock+0x5/0x10 [ 1772.588817] ? search_binary_handler+0x6d/0x240 [ 1772.588820] search_binary_handler+0x80/0x240 [ 1772.588823] load_script+0x201/0x220 [ 1772.588825] search_binary_handler+0x80/0x240 [ 1772.588828] __do_execve_file.isra.32+0x7d2/0xa60 [ 1772.588832] ? strncpy_from_user+0x40/0x180 [ 1772.588835] __x64_sys_execve+0x34/0x40 [ 1772.588838] do_syscall_64+0x60/0x1c0 The warning gets triggered by an ancient lockdep check in the freezer: (gdb) list *0xffffffff812ece06 0xffffffff812ece06 is in flush_old_exec (./include/linux/freezer.h:57). 52 * DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION 53 * If try_to_freeze causes a lockdep warning it means the caller may deadlock 54 */ 55 static inline bool try_to_freeze_unsafe(void) 56 { 57 might_sleep(); 58 if (likely(!freezing(current))) 59 return false; 60 return __refrigerator(false); 61 } I reviewed the ->cred_guard_mutex code, and the mutex is held across all of exec() - and we always did this. But there's this recent -rc4 commit: > Chanho Min (1): > exec: make de_thread() freezable c22397888f1e: exec: make de_thread() freezable I believe this commit is bogus, you cannot call try_to_freeze() from de_thread(), because it's holding the ->cred_guard_mutex." Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-04btrfs: tree-checker: Don't check max block group size as current max chunk ↵Qu Wenruo
size limit is unreliable [BUG] A completely valid btrfs will refuse to mount, with error message like: BTRFS critical (device sdb2): corrupt leaf: root=2 block=239681536 slot=172 \ bg_start=12018974720 bg_len=10888413184, invalid block group size, \ have 10888413184 expect (0, 10737418240] This has been reported several times as the 4.19 kernel is now being used. The filesystem refuses to mount, but is otherwise ok and booting 4.18 is a workaround. Btrfs check returns no error, and all kernels used on this fs is later than 2011, which should all have the 10G size limit commit. [CAUSE] For a 12 devices btrfs, we could allocate a chunk larger than 10G due to stripe stripe bump up. __btrfs_alloc_chunk() |- max_stripe_size = 1G |- max_chunk_size = 10G |- data_stripe = 11 |- if (1G * 11 > 10G) { stripe_size = 976128930; stripe_size = round_up(976128930, SZ_16M) = 989855744 However the final stripe_size (989855744) * 11 = 10888413184, which is still larger than 10G. [FIX] For the comprehensive check, we need to do the full check at chunk read time, and rely on bg <-> chunk mapping to do the check. We could just skip the length check for now. Fixes: fce466eab7ac ("btrfs: tree-checker: Verify block_group_item") Cc: stable@vger.kernel.org # v4.19+ Reported-by: Wang Yugui <wangyugui@e16-tech.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-04drm/fb-helper: Fix typo in parameter descriptionWei Yongjun
Fix typo in parameter description. Fixes: 4be9bd10e22d ("drm/fb_helper: Allow leaking fbdev smem_start") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1543905135-35293-1-git-send-email-weiyongjun1@huawei.com
2018-12-04kprobes/x86: Fix instruction patching corruption when copying more than one ↵Masami Hiramatsu
RIP-relative instruction After copy_optimized_instructions() copies several instructions to the working buffer it tries to fix up the real RIP address, but it adjusts the RIP-relative instruction with an incorrect RIP address for the 2nd and subsequent instructions due to a bug in the logic. This will break the kernel pretty badly (with likely outcomes such as a kernel freeze, a crash, or worse) because probed instructions can refer to the wrong data. For example putting kprobes on cpumask_next() typically hits this bug. cpumask_next() is normally like below if CONFIG_CPUMASK_OFFSTACK=y (in this case nr_cpumask_bits is an alias of nr_cpu_ids): <cpumask_next>: 48 89 f0 mov %rsi,%rax 8b 35 7b fb e2 00 mov 0xe2fb7b(%rip),%esi # ffffffff82db9e64 <nr_cpu_ids> 55 push %rbp ... If we put a kprobe on it and it gets jump-optimized, it gets patched by the kprobes code like this: <cpumask_next>: e9 95 7d 07 1e jmpq 0xffffffffa000207a 7b fb jnp 0xffffffff81f8a2e2 <cpumask_next+2> e2 00 loop 0xffffffff81f8a2e9 <cpumask_next+9> 55 push %rbp This shows that the first two MOV instructions were copied to a trampoline buffer at 0xffffffffa000207a. Here is the disassembled result of the trampoline, skipping the optprobe template instructions: # Dump of assembly code from 0xffffffffa000207a to 0xffffffffa00020ea: 54 push %rsp ... 48 83 c4 08 add $0x8,%rsp 9d popfq 48 89 f0 mov %rsi,%rax 8b 35 82 7d db e2 mov -0x1d24827e(%rip),%esi # 0xffffffff82db9e67 <nr_cpu_ids+3> This dump shows that the second MOV accesses *(nr_cpu_ids+3) instead of the original *nr_cpu_ids. This leads to a kernel freeze because cpumask_next() always returns 0 and for_each_cpu() never ends. Fix this by adding 'len' correctly to the real RIP address while copying. [ mingo: Improved the changelog. ] Reported-by: Michael Rodin <michael@rodin.online> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # v4.15+ Fixes: 63fef14fc98a ("kprobes/x86: Make insn buffer always ROX and use text_poke()") Link: http://lkml.kernel.org/r/153504457253.22602.1314289671019919596.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-04netfilter: nf_tables: fix suspicious RCU usage in nft_chain_stats_replace()Taehee Yoo
basechain->stats is rcu protected data which is updated from nft_chain_stats_replace(). This function is executed from the commit phase which holds the pernet nf_tables commit mutex - not the global nfnetlink subsystem mutex. Test commands to reproduce the problem are: %iptables-nft -I INPUT %iptables-nft -Z %iptables-nft -Z This patch uses RCU calls to handle basechain->stats updates to fix a splat that looks like: [89279.358755] ============================= [89279.363656] WARNING: suspicious RCU usage [89279.368458] 4.20.0-rc2+ #44 Tainted: G W L [89279.374661] ----------------------------- [89279.379542] net/netfilter/nf_tables_api.c:1404 suspicious rcu_dereference_protected() usage! [...] [89279.406556] 1 lock held by iptables-nft/5225: [89279.411728] #0: 00000000bf45a000 (&net->nft.commit_mutex){+.+.}, at: nf_tables_valid_genid+0x1f/0x70 [nf_tables] [89279.424022] stack backtrace: [89279.429236] CPU: 0 PID: 5225 Comm: iptables-nft Tainted: G W L 4.20.0-rc2+ #44 [89279.430135] Call Trace: [89279.430135] dump_stack+0xc9/0x16b [89279.430135] ? show_regs_print_info+0x5/0x5 [89279.430135] ? lockdep_rcu_suspicious+0x117/0x160 [89279.430135] nft_chain_commit_update+0x4ea/0x640 [nf_tables] [89279.430135] ? sched_clock_local+0xd4/0x140 [89279.430135] ? check_flags.part.35+0x440/0x440 [89279.430135] ? __rhashtable_remove_fast.constprop.67+0xec0/0xec0 [nf_tables] [89279.430135] ? sched_clock_cpu+0x126/0x170 [89279.430135] ? find_held_lock+0x39/0x1c0 [89279.430135] ? hlock_class+0x140/0x140 [89279.430135] ? is_bpf_text_address+0x5/0xf0 [89279.430135] ? check_flags.part.35+0x440/0x440 [89279.430135] ? __lock_is_held+0xb4/0x140 [89279.430135] nf_tables_commit+0x2555/0x39c0 [nf_tables] Fixes: f102d66b335a4 ("netfilter: nf_tables: use dedicated mutex to guard transactions") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-03Merge branch 'mlx4-fixes'David S. Miller
Tariq Toukan says: ==================== mlx4 fixes for 4.20-rc This patchset includes small fixes for the mlx4_en driver. First patch by Eran fixes the value used to init the netdevice's min_mtu field. Please queue it to -stable >= v4.10. Second patch by Saeed adds missing Kconfig build dependencies. Series generated against net commit: 35b827b6d061 tun: forbid iface creation with rtnl ops ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net/mlx4_en: Fix build break when CONFIG_INET is offSaeed Mahameed
MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs. Make sure they are listed in MLX4_EN Kconfig dependencies. This fixes the following build break: drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type _u8 ipproto = iph->protocol; Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net/mlx4_en: Change min MTU size to ETH_MIN_MTUEran Ben Elisha
NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in the RFC791 and in the network stack. Remove old mlx4_en only define for it, which was set to wrong value. Fixes: b80f71f5816f ("ethernet/mellanox: use core min/max MTU checking") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net/core: tidy up an error messageQian Cai
netif_napi_add() could report an error like this below due to it allows to pass a format string for wildcarding before calling dev_get_valid_name(), "netif_napi_add() called with weight 256 on device eth%d" For example, hns_enet_drv module does this. hns_nic_try_get_ae hns_nic_init_ring_data netif_napi_add register_netdev dev_get_valid_name Hence, make it a bit more human-readable by using netdev_err_once() instead. Signed-off-by: Qian Cai <cai@gmx.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03Revert "PCI/ASPM: Do not initialize link state when aspm_disabled is set"Bjorn Helgaas
This reverts commit 17c91487364fb33797ed84022564ee7544ac4945. Rafael found that this commit broke the SD card reader in his Acer Aspire S5. Details of the problem are in the bugzilla below. Fixes: 17c91487364f ("PCI/ASPM: Do not initialize link state when aspm_disabled is set") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201801 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-12-03mv88e6060: disable hardware level MAC learningAnderson Luiz Alves
Disable hardware level MAC learning because it breaks station roaming. When enabled it drops all frames that arrive from a MAC address that is on a different port at learning table. Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03macvlan: return correct error valueMatteo Croce
A MAC address must be unique among all the macvlan devices with the same lower device. The only exception is the passthru [sic] mode, which shares the lower device address. When duplicate addresses are detected, EBUSY is returned when bringing the interface up: # ip link add macvlan0 link eth0 type macvlan # read addr </sys/class/net/eth0/address # ip link set macvlan0 address $addr # ip link set macvlan0 up RTNETLINK answers: Device or resource busy Use correct error code which is EADDRINUSE, and do the check also earlier, on address change: # ip link set macvlan0 address $addr RTNETLINK answers: Address already in use Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03sctp: kfree_rcu asocXin Long
In sctp_hash_transport/sctp_epaddr_lookup_transport, it dereferences a transport's asoc under rcu_read_lock while asoc is freed not after a grace period, which leads to a use-after-free panic. This patch fixes it by calling kfree_rcu to make asoc be freed after a grace period. Note that only the asoc's memory is delayed to free in the patch, it won't cause sk to linger longer. Thanks Neil and Marcelo to make this clear. Fixes: 7fda702f9315 ("sctp: use new rhlist interface on sctp transport rhashtable") Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport") Reported-by: syzbot+0b05d8aa7cb185107483@syzkaller.appspotmail.com Reported-by: syzbot+aad231d51b1923158444@syzkaller.appspotmail.com Suggested-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net/ibmvnic: Fix RTNL deadlock during device resetThomas Falcon
Commit a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") made the change to hold the RTNL lock during driver reset but still calls netdev_notify_peers, which results in a deadlock. Instead, use call_netdevice_notifiers, which is functionally the same except that it does not take the RTNL lock again. Fixes: a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03vhost: fix IOTLB lockingJean-Philippe Brucker
Commit 78139c94dc8c ("net: vhost: lock the vqs one by one") moved the vq lock to improve scalability, but introduced a possible deadlock in vhost-iotlb. vhost_iotlb_notify_vq() now takes vq->mutex while holding the device's IOTLB spinlock. And on the vhost_iotlb_miss() path, the spinlock is taken while holding vq->mutex. Since calling vhost_poll_queue() doesn't require any lock, avoid the deadlock by not taking vq->mutex. Fixes: 78139c94dc8c ("net: vhost: lock the vqs one by one") Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03Merge branch 'phy-micrel-toggling-reset'David S. Miller
Yoshihiro Shimoda says: ==================== net: phy: micrel: add toggling phy reset This patch set is for R-Car Gen3 Salvator-XS boards. If we do the following method, the phy cannot link up correctly. 1) Kernel boots by using initramfs. --> No open the nic, so phy_device_register() and phy_probe() deasserts the reset. 2) Kernel enters the suspend. --> So, keep the reset signal as deassert. --> On R-Car Salvator-XS board, unfortunately, the board power is turned off. 3) Kernel returns from suspend. 4) ifconfig eth0 up --> Then, since edge signal of the reset doesn't happen, it cannot link up. 5) ifconfig eth0 down 6) ifconfig eth0 up --> In this case, it can link up. When resolving this issue after I got feedback from Andrew and Heiner, I found an issue that the phy_device.c didn't call phy_resume() if the PHY was not attached. So, patch 1 fixes it and add toggling the phy reset to the micrel phy driver. Changes from v1 (as RFC): - No remove the current code of phy_device.c to avoid any side effects. - Fix the mdio_bus_phy_resume() in phy_device.c. - Add toggling the phy reset in micrel.c if the PHY is not attached. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: phy: micrel: add toggling phy reset if PHY is not attachedYoshihiro Shimoda
This patch adds toggling phy reset if PHY is not attached. Otherwise, some boards (e.g. R-Car H3 Salvator-XS) cannot link up correctly if we do the following method: 1) Kernel boots by using initramfs. --> No open the nic, so phy_device_register() and phy_probe() deasserts the reset. 2) Kernel enters the suspend. --> So, keep the reset signal as deassert. --> On R-Car Salvator-XS board, unfortunately, the board power is turned off. 3) Kernel returns from suspend. 4) ifconfig eth0 up --> Then, since edge signal of the reset doesn't happen, it cannot link up. 5) ifconfig eth0 down 6) ifconfig eth0 up --> In this case, it can link up. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: phy: Fix not to call phy_resume() if PHY is not attachedYoshihiro Shimoda
This patch fixes an issue that mdio_bus_phy_resume() doesn't call phy_resume() if the PHY is not attached. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03bpf: powerpc64: optimize JIT passes for bpf function callsSandipan Das
Once the JITed images for each function in a multi-function program are generated after the first three JIT passes, we only need to fix the target address for the branch instruction corresponding to each bpf-to-bpf function call. This introduces the following optimizations for reducing the work done by the JIT compiler when handling multi-function programs: [1] Instead of doing two extra passes to fix the bpf function calls, do just one as that would be sufficient. [2] During the extra pass, only overwrite the instruction sequences for the bpf-to-bpf function calls as everything else would still remain exactly the same. This also reduces the number of writes to the JITed image. [3] Do not regenerate the prologue and the epilogue during the extra pass as that would be redundant. Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-03tun: remove skb access after netif_receive_skbPrashant Bhole
In tun.c skb->len was accessed while doing stats accounting after a call to netif_receive_skb. We can not access skb after this call because buffers may be dropped. The fix for this bug would be to store skb->len in local variable and then use it after netif_receive_skb(). IMO using xdp data size for accounting bytes will be better because input for tun_xdp_one() is xdp_buff. Hence this patch: - fixes a bug by removing skb access after netif_receive_skb() - uses xdp data size for accounting bytes [613.019057] BUG: KASAN: use-after-free in tun_sendmsg+0x77c/0xc50 [tun] [613.021062] Read of size 4 at addr ffff8881da9ab7c0 by task vhost-1115/1155 [613.023073] [613.024003] CPU: 0 PID: 1155 Comm: vhost-1115 Not tainted 4.20.0-rc3-vm+ #232 [613.026029] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [613.029116] Call Trace: [613.031145] dump_stack+0x5b/0x90 [613.032219] print_address_description+0x6c/0x23c [613.034156] ? tun_sendmsg+0x77c/0xc50 [tun] [613.036141] kasan_report.cold.5+0x241/0x308 [613.038125] tun_sendmsg+0x77c/0xc50 [tun] [613.040109] ? tun_get_user+0x1960/0x1960 [tun] [613.042094] ? __isolate_free_page+0x270/0x270 [613.045173] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net] [613.047127] ? peek_head_len.part.13+0x90/0x90 [vhost_net] [613.049096] ? get_tx_bufs+0x5a/0x2c0 [vhost_net] [613.051106] ? vhost_enable_notify+0x2d8/0x420 [vhost] [613.053139] handle_tx_copy+0x2d0/0x8f0 [vhost_net] [613.053139] ? vhost_net_buf_peek+0x340/0x340 [vhost_net] [613.053139] ? __mutex_lock+0x8d9/0xb30 [613.053139] ? finish_task_switch+0x8f/0x3f0 [613.053139] ? handle_tx+0x32/0x120 [vhost_net] [613.053139] ? mutex_trylock+0x110/0x110 [613.053139] ? finish_task_switch+0xcf/0x3f0 [613.053139] ? finish_task_switch+0x240/0x3f0 [613.053139] ? __switch_to_asm+0x34/0x70 [613.053139] ? __switch_to_asm+0x40/0x70 [613.053139] ? __schedule+0x506/0xf10 [613.053139] handle_tx+0xc7/0x120 [vhost_net] [613.053139] vhost_worker+0x166/0x200 [vhost] [613.053139] ? vhost_dev_init+0x580/0x580 [vhost] [613.053139] ? __kthread_parkme+0x77/0x90 [613.053139] ? vhost_dev_init+0x580/0x580 [vhost] [613.053139] kthread+0x1b1/0x1d0 [613.053139] ? kthread_park+0xb0/0xb0 [613.053139] ret_from_fork+0x35/0x40 [613.088705] [613.088705] Allocated by task 1155: [613.088705] kasan_kmalloc+0xbf/0xe0 [613.088705] kmem_cache_alloc+0xdc/0x220 [613.088705] __build_skb+0x2a/0x160 [613.088705] build_skb+0x14/0xc0 [613.088705] tun_sendmsg+0x4f0/0xc50 [tun] [613.088705] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net] [613.088705] handle_tx_copy+0x2d0/0x8f0 [vhost_net] [613.088705] handle_tx+0xc7/0x120 [vhost_net] [613.088705] vhost_worker+0x166/0x200 [vhost] [613.088705] kthread+0x1b1/0x1d0 [613.088705] ret_from_fork+0x35/0x40 [613.088705] [613.088705] Freed by task 1155: [613.088705] __kasan_slab_free+0x12e/0x180 [613.088705] kmem_cache_free+0xa0/0x230 [613.088705] ip6_mc_input+0x40f/0x5a0 [613.088705] ipv6_rcv+0xc9/0x1e0 [613.088705] __netif_receive_skb_one_core+0xc1/0x100 [613.088705] netif_receive_skb_internal+0xc4/0x270 [613.088705] br_pass_frame_up+0x2b9/0x2e0 [613.088705] br_handle_frame_finish+0x2fb/0x7a0 [613.088705] br_handle_frame+0x30f/0x6c0 [613.088705] __netif_receive_skb_core+0x61a/0x15b0 [613.088705] __netif_receive_skb_one_core+0x8e/0x100 [613.088705] netif_receive_skb_internal+0xc4/0x270 [613.088705] tun_sendmsg+0x738/0xc50 [tun] [613.088705] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net] [613.088705] handle_tx_copy+0x2d0/0x8f0 [vhost_net] [613.088705] handle_tx+0xc7/0x120 [vhost_net] [613.088705] vhost_worker+0x166/0x200 [vhost] [613.088705] kthread+0x1b1/0x1d0 [613.088705] ret_from_fork+0x35/0x40 [613.088705] [613.088705] The buggy address belongs to the object at ffff8881da9ab740 [613.088705] which belongs to the cache skbuff_head_cache of size 232 Fixes: 043d222f93ab ("tuntap: accept an array of XDP buffs through sendmsg()") Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: 8139cp: fix a BUG triggered by changing mtu with network trafficSu Yanjun
When changing mtu many times with traffic, a bug is triggered: [ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26! [ 1035.684042] invalid opcode: 0000 [#1] SMP [ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter devlink ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic [ 1035.684102] pata_acpi virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror dm_region_hash dm_log dm_mod [last unloaded: 8139cp] [ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded Tainted: G OE ------------ T 3.10.0-957.el7.x86_64 #1 [ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti: ffff8f5a2e32c000 [ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>] [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP: 0000:ffff8f5a75483e50 EFLAGS: 00010093 [ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX: 0000000000000000 [ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI: ffff8f599fea3ec0 [ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09: 0000000000000000 [ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12: ffff8f599fea3e00 [ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000184 [ 1035.684162] FS: 00007fa8434de740(0000) GS:ffff8f5a75480000(0000) knlGS:0000000000000000 [ 1035.684162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4: 00000000001406e0 [ 1035.684162] Call Trace: [ 1035.684162] <IRQ> [ 1035.684162] [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp] [ 1035.684162] [<ffffffffba14a294>] __handle_irq_event_percpu+0x44/0x1c0 [ 1035.684162] [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80 [ 1035.684162] [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60 [ 1035.684162] [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110 [ 1035.684162] [<ffffffffba02e554>] handle_irq+0xe4/0x1a0 [ 1035.684162] [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0 [ 1035.684162] [<ffffffffba76b362>] common_interrupt+0x162/0x162 [ 1035.684162] <EOI> [ 1035.684162] [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70 [ 1035.684162] [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120 [ 1035.684162] [<ffffffffba1b64fb>] unlock_page+0x2b/0x30 [ 1035.684162] [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0 [ 1035.684162] [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10 [ 1035.684162] [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0 [ 1035.684162] [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500 [ 1035.684162] [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150 [ 1035.684162] [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0 [ 1035.684162] [<ffffffffba76b788>] async_page_fault+0x28/0x30 [ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f 9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48 [ 1035.684162] RIP [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP <ffff8f5a75483e50> It's not the same as in 7fe0ee09 patch described. As 8139cp uses shared irq mode, other device irq will trigger cp_interrupt to execute. cp_change_mtu -> cp_close -> cp_open In cp_close routine just before free_irq(), some interrupt may occur. In my environment, cp_interrupt exectutes and IntrStatus is 0x4, exactly TxOk. That will cause cp_tx to wake device queue. As device queue is started, cp_start_xmit and cp_open will run at same time which will cause kernel BUG. For example: [#] for tx descriptor At start: [#][#][#] num_queued=3 After cp_init_hw->cp_start_hw->netdev_reset_queue: [#][#][#] num_queued=0 When 8139cp starts to work then cp_tx will check num_queued mismatchs the complete_bytes. The patch will check IntrMask before check IntrStatus in cp_interrupt. When 8139cp interrupt is disabled, just return. Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: phy: don't allow __set_phy_supported to add unsupported modesHeiner Kallweit
Currently __set_phy_supported allows to add modes w/o checking whether the PHY supports them. This is wrong, it should never add modes but only remove modes we don't want to support. The commit marked as fixed didn't do anything wrong, it just copied existing functionality to the helper which is being fixed now. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03libata: whitelist all SAMSUNG MZ7KM* solid-state disksJuha-Matti Tilli
These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted. Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-03Input: omap-keypad - fix keyboard debounce configurationTony Lindgren
I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: xpad - quirk all PDP Xbox One gamepadsCameron Gutman
Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: synaptics - enable SMBus for HP 15-ay000Teika Kazura
SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000 series, This device has been reported in these messages in the "linux-input" mailing list: * https://marc.info/?l=linux-input&m=152016683003369&w=2 * https://www.spinics.net/lists/linux-input/msg52525.html Reported-by: Nitesh Debnath <niteshkd1999@gmail.com> Reported-by: Teika Kazura <teika@gmx.com> Signed-off-by: Teika Kazura <teika@gmx.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: synaptics - add PNP ID for ThinkPad P50 to SMBusLyude Paul
Noticed the other day the trackpoint felt different on my P50, then realized it was because rmi4 wasn't loading for this machine automatically. Suspend/resume, hibernate, and everything else seem to work perfectly fine on here. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARRNoah Westervelt
Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by: Noah Westervelt <nwestervelt@outlook.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: elan_i2c - add support for ELAN0621 touchpadAdam Wong
Added the ability to detect the ELAN0621 touchpad found in some Lenovo laptops. Signed-off-by: Adam Wong <adam@adamwong.me> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Merge tag 'media/v4.20-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - Revert a dt-bindings patch whose driver didn't make for 4.20 - fix a kernel oops at vicodec driver - fix a frame overflow at gspca with was causing regressions on some cameras, making them to not work - use the proper type for wait_queue head - make media request API compatible with 32-bit userspace on 64-bit kernel - fix a regression on Kernel 4.19 at dvb-pll - don't use SPDX headers yet for GFDL * tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mediactl docs: Fix licensing message media: dvb-pll: don't re-validate tuner frequencies media: dvb-pll: fix tuner frequency ranges media: Revert "media: dt-bindings: Document the Rockchip VPU bindings" media: gspca: fix frame overflow error media: vicodec: fix memchr() kernel oops media: cedrus: add action item to the TODO media: media-request: Add compat ioctl media: Use wait_queue_head_t for media_request
2018-12-03clk: zynqmp: Off by one in zynqmp_is_valid_clock()Dan Carpenter
The > comparison should be >= to prevent reading beyond the end of the clock[] array. (The clock[] array is allocated in zynqmp_clk_setup() and has clock_max_idx elements.) Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03clk: mmp: Off by one in mmp_clk_add()Dan Carpenter
The > comparison should be >= or we write one element beyond the end of the unit->clk_table[] array. (The unit->clk_table[] array is allocated in the mmp_clk_init() function and it has unit->nr_clks elements). Fixes: 4661fda10f8b ("clk: mmp: add basic support functions for DT support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03clk: mvebu: Off by one bugs in cp110_of_clk_get()Dan Carpenter
These > comparisons should be >= to prevent reading beyond the end of of the clk_data->hws[] buffer. The clk_data->hws[] array is allocated in cp110_syscon_common_probe() when we do: cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) + sizeof(struct clk_hw *) * CP110_CLK_NUM, GFP_KERNEL); As you can see, it has CP110_CLK_NUM elements which is equivalent to CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS. Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull IDE fixes from David Miller: "A missing of_node_put() and a small cleanup" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: Change to use DEFINE_SHOW_ATTRIBUTE macro ide: pmac: add of_node_put()
2018-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: 1) Some implicit switch fallthrough fixes from Stephen Rothwell. 2) Missing of_node_put() in various sparc drivers from Yangtao Li. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: drivers/tty: add missing of_node_put() drivers/sbus/char: add of_node_put() sbus: char: add of_node_put() sparc32: supress another implicit-fallthrough warning sparc32: suppress an implicit-fallthrough warning sparc: suppress the implicit-fallthrough warning arch/sparc: Use kzalloc_node
2018-12-03drm/amd/powerplay: support SoftMin/Max setting for some specific DPMEvan Quan
For some case, no need to force SoftMin/Max settings for all DPMs. It's OK to force on some specific DPM only. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-03drm/amd/powerplay: issue pre-display settings for display change eventEvan Quan
For display config change event only, pre-display config settings are needed. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-03drm/amd/powerplay: support new pptable upload on Vega20Evan Quan
New pptable upload through sysfs interface is supported. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 16:07:14 +0000