summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-21drm/amd/display: Fix ASSR regression on embedded panelsStylon Wang
[Why] Regression found in some embedded panels traces back to the earliest upstreamed ASSR patch. The changed code flow are causing problems with some panels. [How] - Change ASSR enabling code while preserving original code flow as much as possible - Simplify the code on guarding with internal display flag Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-21drm/amdgpu: add yellow carp pci id (v2)Aaron Liu
Add Yellow Carp PCI id support. v2: add another DID Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amdgpu: update yellow carp external rev_id handlingAaron Liu
0x1681 has a different external revision id. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/pm: Support board calibration on aldebaranLijo Lazar
Add support for board power calibration on Aldebaran. Board calibration is done after DC offset calibration. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: change zstate allow msg conditionEric Yang
[Why] PMFW message which previously thought to only control Z9 controls both Z9 and Z10. Also HW design team requested that Z9 must only be supported on eDP due to content protection interop. [How] Change zstate support condition to match updated policy Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Populate dtbclk entries for dcn3.02/3.03Bindu Ramamurthy
[Why] Populate dtbclk values from bwparams for dcn302, dcn303. [How] dtbclk values are fetched from bandwidthparams for all DPM levels and for DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Line Buffer changesNevenko Stupar
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines of 4K resolution lines to 5 lines of 4K resolution lines. All Line Buffer can be used as extended memory for P State change latency hiding. The maximum number of lines is increased to 32 lines. Finally, LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB memory piece 2) are not affected, no change in size, only 3 pieces is affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0 and LB_MEMORY_CONFIG_3 (for 4:2:0) modes. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Remove MALL function from DCN3.1Mikita Lipski
[why] DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to DMUB just remove the function pointer. [how] Remove apply_idle_power_optimizations from function pointers structure for DCN31 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Only set default brightness for OLEDCamille Cho
[Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Update bounding box for DCN3.1Nicholas Kazlauskas
[Why & How] We're missing a default value for dram_channel_width_bytes in the DCN3.1 SOC bounding box and we don't currently have the interface in place to query the actual value from VBIOS. Put in a hardcoded default until we have the interface in place. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Query VCO frequency from register for DCN3.1Nicholas Kazlauskas
[Why] Hardcoding the VCO frequency isn't correct since we don't own or control the value. In the case where the hardcode is also missing we can't lightup display. [How] Query from the CLK register instead. Update the DFS frequency to be able to compute the VCO frequency. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Populate socclk entries for dcn3.02/3.03Bindu Ramamurthy
[Why] Initialize socclk entries in bandwidth params for dcn302, dcn303. [How] Fetch the sockclk values from smu for the DPM levels and for the DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Fix max vstartup calculation for modes with bordersNicholas Kazlauskas
[Why] Vertical and horizontal borders in timings are treated as increasing the active area - vblank and hblank actually shrink. Our input into DML does not include these borders so it incorrectly assumes it has more time than available for vstartup and tmdl calculations for some modes with borders. An example of such a timing would be 640x480@72Hz: h_total: 832 h_border_left: 8 h_addressable: 640 h_border_right: 8 h_front_porch: 16 h_sync_width: 40 v_total: 520 v_border_top: 8 v_addressable: 480 v_border_bottom: 8 v_front_porch: 1 v_sync_width: 3 pix_clk_100hz: 315000 [How] Include borders as part of destination vactive/hactive. This change DCN20+ so it has wide impact, but the destination vactive and hactive are only really used for vstartup calculation anyway. Most modes do not have vertical or horizontal borders. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: implement workaround for riommu related hangEric Yang
[Why] During S4/S5/reboot, sometimes riommu invalidation request arrive too early, DCN may be unable to respond to the invalidation request resulting in pstate hang. [How] VBIOS will force allow pstate for riommu invalidation and driver will clear it after powering down display pipes. Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Fix comparison error in dcn21 DMLVictor Lu
[why] A comparison error made it possible to not iterate through all the specified prefetch modes. [how] Correct "<" to "<=" Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-16drm/amd/display: Fix 10bit 4K display on CIK GPUsLiviu Dudau
Commit 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.") doesn't seems to have fixed 10bit 4K rendering over DisplayPort for CIK GPUs. On my machine with a HAWAII GPU I get a broken image that looks like it has an effective resolution of 1920x1080 but scaled up in an irregular way. Reverting the commit or applying this patch fixes the problem on v5.14-rc1. Fixes: 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.") Acked-by: Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-16drm/amd/pm: update DRIVER_IF_VERSION for beige_gobyTao Zhou
Update the version to 0xD for beige_goby. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-16drm/amdgpu: update gc golden setting for dimgrey_cavefishTao Zhou
Update gc_10_3_4 golden setting. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-16drm/amdgpu: update golden setting for sienna_cichlidLikun Gao
Update GFX golden setting for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-16drm/amdgpu: update the golden setting for vangoghXiaojian Du
This patch is to update the golden setting for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-16amdgpu/nv.c - Optimize code for video codec support structureVeerabadhran Gopalakrishnan
Optimized the code for codec info structure initialization Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-16amdgpu/nv.c - Added video codec support for Yellow CarpVeerabadhran Gopalakrishnan
Added the supported codecs in the video capabilities query. Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-16Merge tag 'drm-intel-fixes-2021-07-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Two regression fixes targeting stable: - Fix -EDEADLK handling regression (Ville) - Drop the page table optimisation (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YPA8y1DSCp2EbtpC@intel.com
2021-07-16Merge tag 'drm-misc-fixes-2021-07-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull (less than what git shortlog provides): * fbdev: Avoid use-after-free by not deleting current video mode * ttm: Avoid NULL-ptr deref in ttm_range_man_fini() * vmwgfx: Fix a merge commit Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YO/yoFO+iSEqnIH0@linux-uq9g
2021-07-16Merge tag 'amd-drm-fixes-5.14-2021-07-14' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.14-2021-07-14: amdgpu: - SR-IOV fixes - RAS fixes - eDP fixes - SMU13 code unification to facilitate fixes in the future - Add new renoir DID - Yellow Carp fixes - Beige Goby fixes - Revert a bunch of TLB fixes that caused regressions - Revert an LTTPR display regression amdkfd - Fix VRAM access regression - SVM fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210714220858.5553-1-alexander.deucher@amd.com
2021-07-14drm/amdgpu: add another Renoir DIDJinzhou Su
Add new PCI device id. Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.11.x
2021-07-14drm/ttm: add a check against null pointer dereferenceZheyu Ma
When calling ttm_range_man_fini(), 'man' may be uninitialized, which may cause a null pointer dereference bug. Fix this by checking if it is a null pointer. This log reveals it: [ 7.902580 ] BUG: kernel NULL pointer dereference, address: 0000000000000058 [ 7.905721 ] RIP: 0010:ttm_range_man_fini+0x40/0x160 [ 7.911826 ] Call Trace: [ 7.911826 ] radeon_ttm_fini+0x167/0x210 [ 7.911826 ] radeon_bo_fini+0x15/0x40 [ 7.913767 ] rs400_fini+0x55/0x80 [ 7.914358 ] radeon_device_fini+0x3c/0x140 [ 7.914358 ] radeon_driver_unload_kms+0x5c/0xe0 [ 7.914358 ] radeon_driver_load_kms+0x13a/0x200 [ 7.914358 ] ? radeon_driver_unload_kms+0xe0/0xe0 [ 7.914358 ] drm_dev_register+0x1db/0x290 [ 7.914358 ] radeon_pci_probe+0x16a/0x230 [ 7.914358 ] local_pci_probe+0x4a/0xb0 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1626274459-8148-1-git-send-email-zheyuma97@gmail.com Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-14drm/i915/gtt: drop the page table optimisationMatthew Auld
We skip filling out the pt with scratch entries if the va range covers the entire pt, since we later have to fill it with the PTEs for the object pages anyway. However this might leave open a small window where the PTEs don't point to anything valid for the HW to consume. When for example using 2M GTT pages this fill_px() showed up as being quite significant in perf measurements, and ends up being completely wasted since we ignore the pt and just use the pde directly. Anyway, currently we have our PTE construction split between alloc and insert, which is probably slightly iffy nowadays, since the alloc doesn't actually allocate anything anymore, instead it just sets up the page directories and points the PTEs at the scratch page. Later when we do the insert step we re-program the PTEs again. Better might be to squash the alloc and insert into a single step, then bringing back this optimisation(along with some others) should be possible. Fixes: 14826673247e ("drm/i915: Only initialize partially filled pagetables") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.15+ Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210713130431.2392740-1-matthew.auld@intel.com (cherry picked from commit 8f88ca76b3942d82e2c1cea8735ec368d89ecc15) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-07-13drm/i915/gt: Fix -EDEADLK handling regressionVille Syrjälä
The conversion to ww mutexes failed to address the fence code which already returns -EDEADLK when we run out of fences. Ww mutexes on the other hand treat -EDEADLK as an internal errno value indicating a need to restart the operation due to a deadlock. So now when the fence code returns -EDEADLK the higher level code erroneously restarts everything instead of returning the error to userspace as is expected. To remedy this let's switch the fence code to use a different errno value for this. -ENOBUFS seems like a semi-reasonable unique choice. Apart from igt the only user of this I could find is sna, and even there all we do is dump the current fence registers from debugfs into the X server log. So no user visible functionality is affected. If we really cared about preserving this we could of course convert back to -EDEADLK higher up, but doesn't seem like that's worth the hassle here. Not quite sure which commit specifically broke this, but I'll just attribute it to the general gem ww mutex work. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> Testcase: igt/gem_pread/exhaustion Testcase: igt/gem_pwrite/basic-exhaustion Testcase: igt/gem_fenced_exec_thrash/too-many-fences Fixes: 80f0b679d6f0 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210630164413.25481-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit 78d2ad7eb4e1f0e9cd5d79788446b6092c21d3e0) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-07-13drm/amd/pm: Add waiting for response of mode-reset message for yellow carpAaron Liu
Remove mdelay process and use smu_cmn_send_smc_msg_with_param to send mode-reset message to SMC. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping"Eric Huang
This reverts commit 1098d658bef05e5fee634aab0b6a1fa590cfca24. Reason for revert: it causes regressions on several Asics. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update"Eric Huang
This reverts commit 075e8080c1a7571563171a07fa9ce47c4bc80044. Reason for revert: the related commit is reverted. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13Revert "drm/amdkfd: Make TLB flush conditional on mapping"Eric Huang
This reverts commit 31f33243788dcbae8bd2819ed83923a73f7dfd30. Reason for revert: it causes regressions on several Asics. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13Revert "drm/amdgpu: Fix warning of Function parameter or member not described"Eric Huang
This reverts commit 7a68d188d1c4a9d947369acaa19040a58baaaeda. Reason for revert: the related commit is reverted. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13Revert "drm/amdkfd: Add memory sync before TLB flush on unmap"Eric Huang
This reverts commit 3be4dca197010d1328df8b11febc8c40491be498. Reason for revert: it causes regressions on several Asics. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amd/pm: Fix BACO state setting for Beige_GobyChengming Gui
Correct BACO state setting for Beige_Goby Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdgpu: Restore msix after FLREmily.Deng
After FLR, the msix will be cleared, so need to re-enable it. Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com> Signed-off-by: Emily.Deng <Emily.Deng@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdkfd: Allow CPU access for all VRAM BOsFelix Kuehling
The thunk needs to mmap all BOs for CPU access to allow the debugger to access them. Invisible ones are mapped with PROT_NONE. Fixes: 71df0368e9b6 ("drm/amdgpu: Implement mmap as GEM object function") Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdgpu/display - only update eDP's backlight level when necessaryZhan Liu
[Why] The original logic is to update eDP's backlight level on every amdgpu dm atomic commit, which causes excessive DMUB write. As a result, when playing game or moving window around, DMUB timeout and system lagging are observed. [How] We only need to update eDP's backlight level when current level doesn't match requested level. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdkfd: handle fault counters on invalid addressPhilip Yang
prange is NULL if vm fault retry on invalid address, for this case, can not use prange to get pdd, use adev to get gpuidx and then get pdd instead, then increase pdd vm fault counter. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdgpu: Correct the irq numbers for virtual crtcEmily Deng
The irq number should be decided by num_crtc, and the num_crtc could change by parameter. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amd/display: update header file nameXiaomeng Hou
Update the register header file name. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carpXiaomeng Hou
Since there's nothing special in smu implementation for yellow carp, it's better to reuse the common smu_v13_0 interfaces and drop the specific smu_v13_0_1.c|h files. v2: remove the duplicate register offset and shift mask header files as well. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amd/display: remove faulty assertDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13Revert "drm/amd/display: Always write repeater mode regardless of LTTPR"Wesley Chalmers
This reverts commit 2b7605d73b97e2fa28e0817242e66ca968d2a7cb Some displays are not lighting up when put in LTTPR Transparent Mode Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-13drm/amd/display: Fix updating infoframe for DCN3.1 eDPNicholas Kazlauskas
[Why] We're only treating TMDS as a valid target for infoframe updates which results in PSR being unable to transition from state 4 to state 5. [How] Also allow infoframe updates for DCN3.1 - following how we handle this path for earlier ASIC as well. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdgpu: Return error if no RASLuben Tuikov
In amdgpu_ras_query_error_count() return an error if the device doesn't support RAS. This prevents that function from having to always set the values of the integer pointers (if set), and thus prevents function side effects--always to have to set values of integers if integer pointers set, regardless of whether RAS is supported or not--with this change this side effect is mitigated. Also, if no pointers are set, don't count, since we've no way of reporting the counts. Also, give this function a kernel-doc. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: John Clements <john.clements@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Reported-by: Tom Rix <trix@redhat.com> Fixes: a46751fbcde505 ("drm/amdgpu: Fix RAS function interface") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdgpu: SRIOV flr_work should take write_lockJingwen Chen
[Why] If flr_work takes read_lock, then other threads who takes read_lock can access hardware when host is doing vf flr. [How] flr_work should take write_lock to avoid this case. Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13fbmem: Do not delete the mode that is still in useZhen Lei
The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 13ff178ccd6d ("fbcon: Call fbcon_mode_deleted/new_modelist directly") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com
2021-07-13Merge remote-tracking branch 'drm-misc/drm-misc-next-fixes' into drm-misc-fixesThomas Zimmermann
Picking up left-over patches in drm-misc-next-fixes.
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 14:15:54 +0000