| Age | Commit message (Collapse) | Author |
|---|
|
The test verifies that available features aren't changed by toggling
offload on the device. Creating a device with offload off and then
enabling it later should result in the same features as creating the
device with offload enabled directly.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ba801bd0a75b02de2dddbfc77f9efceb8b3d8a2e.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test verifies that toggling offload works (both via rtnetlink and
macsec's genetlink APIs). This is only possible when no SA is
configured.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/bf8e27ee0d921caa4eb35f1e830eca6d4080ddb2.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're going to expand this test, and macsec offload is only lightly
related to rtnetlink.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/a1f92c250cc129b4bb111a206c4b560bab4e24a5.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If macsec is offloaded, we need to follow the lower device's
capabilities, like VLAN devices do.
Leave the limits unchanged when the offload is disabled.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8240c0181e851f169d815f59658a01fb9dfc5073.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For all events, we need to loop over the list of secys, so let's move
the common variables out of the switch/case.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/9b8996af518fbeb3b7d527feb15d5788495e3108.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit extends the set of netdevice features supported by macsec
devices when offload is enabled, which increases performance
significantly (for a single TCP stream: 17.5Gbps to 38.5Gbps on my
test machines).
Commit c850240b6c41 ("net: macsec: report real_dev features when HW
offloading is enabled") previously attempted something similar, but
had to be reverted (commit 8bcd560ae878 ("Revert "net: macsec: report
real_dev features when HW offloading is enabled"")) because the set of
features it exposed was too large.
During initialization, all features are set, and they're then removed
via ndo_fix_features (macsec_fix_features). This allows the
offloadable features to be automatically enabled if offloading is
turned on after device creation.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8b32c3011d269d6f149724e80c1ffe67c9534067.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test checking that some features are active by default and
changeable.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/fff58fa70f8a300440958b5020f6a4eb2e9dad61.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdevsim currently only set HW_TC in its hw_features, but other
features should also be present to better reflect the behavior of real
HW.
In my macsec offload testing, this ends up as HW_CSUM being missing
from hw_features, so it doesn't stick in wanted_features when offload
is turned off. Then HW_CSUM (and thus TSO, thanks to
netdev_fix_features) is not automatically turned back on when offload
is re-enabled.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b918dc4dd76410a57f7516a855f66b0a2bd58326.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Yunsheng Lin says:
====================
Replace page_frag with page_frag_cache (Part-1)
This is part 1 of "Replace page_frag with page_frag_cache",
which mainly contain refactoring and optimization for the
implementation of page_frag API before the replacing.
As the discussion in [1], it would be better to target net-next
tree to get more testing as all the callers page_frag API are
in networking, and the chance of conflicting with MM tree seems
low as implementation of page_frag API seems quite self-contained.
After [2], there are still two implementations for page frag:
1. mm/page_alloc.c: net stack seems to be using it in the
rx part with 'struct page_frag_cache' and the main API
being page_frag_alloc_align().
2. net/core/sock.c: net stack seems to be using it in the
tx part with 'struct page_frag' and the main API being
skb_page_frag_refill().
This patchset tries to unfiy the page frag implementation
by replacing page_frag with page_frag_cache for sk_page_frag()
first. net_high_order_alloc_disable_key for the implementation
in net/core/sock.c doesn't seems matter that much now as pcp
is also supported for high-order pages:
commit 44042b449872 ("mm/page_alloc: allow high-order pages to
be stored on the per-cpu lists")
As the related change is mostly related to networking, so
targeting the net-next. And will try to replace the rest
of page_frag in the follow patchset.
After this patchset:
1. Unify the page frag implementation by taking the best out of
two the existing implementations: we are able to save some space
for the 'page_frag_cache' API user, and avoid 'get_page()' for
the old 'page_frag' API user.
2. Future bugfix and performance can be done in one place, hence
improving maintainability of page_frag's implementation.
Kernel Image changing:
Linux Kernel total | text data bss
------------------------------------------------------
after 45250307 | 27274279 17209996 766032
before 45254134 | 27278118 17209984 766032
delta -3827 | -3839 +12 +0
1. https://lore.kernel.org/all/add10dd4-7f5d-4aa1-aa04-767590f944e0@redhat.com/
2. https://lore.kernel.org/all/20240228093013.8263-1-linyunsheng@huawei.com/
====================
Link: https://patch.msgid.link/20241028115343.3405838-1-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It seems there is about 24Bytes binary size increase for
__page_frag_cache_refill() after refactoring in arm64 system
with 64K PAGE_SIZE. By doing the gdb disassembling, It seems
we can have more than 100Bytes decrease for the binary size
by using __alloc_pages() to replace alloc_pages_node(), as
there seems to be some unnecessary checking for nid being
NUMA_NO_NODE, especially when page_frag is part of the mm
system.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241028115343.3405838-8-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently there is one 'struct page_frag' for every 'struct
sock' and 'struct task_struct', we are about to replace the
'struct page_frag' with 'struct page_frag_cache' for them.
Before begin the replacing, we need to ensure the size of
'struct page_frag_cache' is not bigger than the size of
'struct page_frag', as there may be tens of thousands of
'struct sock' and 'struct task_struct' instances in the
system.
By or'ing the page order & pfmemalloc with lower bits of
'va' instead of using 'u16' or 'u32' for page size and 'u8'
for pfmemalloc, we are able to avoid 3 or 5 bytes space waste.
And page address & pfmemalloc & order is unchanged for the
same page in the same 'page_frag_cache' instance, it makes
sense to fit them together.
After this patch, the size of 'struct page_frag_cache' should be
the same as the size of 'struct page_frag'.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241028115343.3405838-7-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the get_order() implemented by xtensa supporting 'nsau'
instruction seems be the same as the generic implementation
in include/asm-generic/getorder.h when size is not a constant
value as the generic implementation calling the fls*() is also
utilizing the 'nsau' instruction for xtensa.
So remove the get_order() implemented by xtensa, as using the
generic implementation may enable the compiler to do the
computing when size is a constant value instead of runtime
computing and enable the using of get_order() in BUILD_BUG_ON()
macro in next patch.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241028115343.3405838-6-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use appropriate frag_page API instead of caller accessing
'page_frag_cache' directly.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20241028115343.3405838-5-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are about to use page_frag_alloc_*() API to not just
allocate memory for skb->data, but also use them to do
the memory allocation for skb frag too. Currently the
implementation of page_frag in mm subsystem is running
the offset as a countdown rather than count-up value,
there may have several advantages to that as mentioned
in [1], but it may have some disadvantages, for example,
it may disable skb frag coalescing and more correct cache
prefetching
We have a trade-off to make in order to have a unified
implementation and API for page_frag, so use a initial zero
offset in this patch, and the following patch will try to
make some optimization to avoid the disadvantages as much
as possible.
1. https://lore.kernel.org/all/f4abe71b3439b39d17a6fb2d410180f367cadf5c.camel@gmail.com/
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241028115343.3405838-4-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Inspired by [1], move the page fragment allocator from page_alloc
into its own c file and header file, as we are about to make more
change for it to replace another page_frag implementation in
sock.c
As this patchset is going to replace 'struct page_frag' with
'struct page_frag_cache' in sched.h, including page_frag_cache.h
in sched.h has a compiler error caused by interdependence between
mm_types.h and mm.h for asm-offsets.c, see [2]. So avoid the compiler
error by moving 'struct page_frag_cache' to mm_types_task.h as
suggested by Alexander, see [3].
1. https://lore.kernel.org/all/20230411160902.4134381-3-dhowells@redhat.com/
2. https://lore.kernel.org/all/15623dac-9358-4597-b3ee-3694a5956920@gmail.com/
3. https://lore.kernel.org/all/CAKgT0UdH1yD=LSCXFJ=YM_aiA4OomD-2wXykO42bizaWMt_HOA@mail.gmail.com/
CC: David Howells <dhowells@redhat.com>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241028115343.3405838-3-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The testing is done by ensuring that the fragment allocated
from a frag_frag_cache instance is pushed into a ptr_ring
instance in a kthread binded to a specified cpu, and a kthread
binded to a specified cpu will pop the fragment from the
ptr_ring and free the fragment.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241028115343.3405838-2-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most of the original conversion is from the spatch below,
but I edited some and left out other instances that were
either buggy after conversion (where default values don't
fit into the type) or just looked strange.
@@
expression attr, def;
expression val;
identifier fn =~ "^nla_get_.*";
fresh identifier dfn = fn ## "_default";
@@
(
-if (attr)
- val = fn(attr);
-else
- val = def;
+val = dfn(attr, def);
|
-if (!attr)
- val = def;
-else
- val = fn(attr);
+val = dfn(attr, def);
|
-if (!attr)
- return def;
-return fn(attr);
+return dfn(attr, def);
|
-attr ? fn(attr) : def
+dfn(attr, def)
|
-!attr ? def : fn(attr)
+dfn(attr, def)
)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are quite a number of places that use patterns
such as
if (attr)
val = nla_get_u16(attr);
else
val = DEFAULT;
Add nla_get_u16_default() and friends like that to
not have to type this out all the time.
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241108114145.acd2aadb03ac.I3df6aac71d38a5baa1c0a03d0c7e82d4395c030e@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is currently impossible to delete individual FDB entries (as opposed
to flushing) that were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
RTNETLINK answers: Invalid argument
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
This is in contrast to MDB entries that can be deleted after the VLAN
was deleted:
# bridge vlan add vid 10 dev dummy1
# bridge mdb add dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge vlan del vid 10 dev dummy1
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb del dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
Error: bridge: MDB entry not found.
Align the two interfaces and allow user space to delete FDB entries that
were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
Error: Fdb entry not found.
Add a selftest to make sure this behavior does not regress:
# ./rtnetlink.sh -t kci_test_fdb_del
PASS: bridge fdb del
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241105133954.350479-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the mlx5_eq_comp_int() interrupt handler schedules a tasklet
to call mlx5_cq_tasklet_cb() if it processes any completions. For CQs
whose completions don't need to be processed in tasklet context, this
adds unnecessary overhead. In a heavy TCP workload, we see 4% of CPU
time spent on the tasklet_trylock() in tasklet_action_common(), with a
smaller amount spent on the atomic operations in tasklet_schedule(),
tasklet_clear_sched(), and locking the spinlock in mlx5_cq_tasklet_cb().
TCP completions are handled by mlx5e_completion_event(), which schedules
NAPI to poll the queue, so they don't need tasklet processing.
Schedule the tasklet in mlx5_add_cq_to_tasklet() instead to avoid this
overhead. mlx5_add_cq_to_tasklet() is responsible for enqueuing the CQs
to be processed in tasklet context, so it can schedule the tasklet. CQs
that need tasklet processing have their interrupt comp handler set to
mlx5_add_cq_to_tasklet(), so they will schedule the tasklet. CQs that
don't need tasklet processing won't schedule the tasklet. To avoid
scheduling the tasklet multiple times during the same interrupt, only
schedule the tasklet in mlx5_add_cq_to_tasklet() if the tasklet work
queue was empty before the new CQ was pushed to it.
The additional branch in mlx5_add_cq_to_tasklet(), called for each EQE,
may add a small cost for the userspace Infiniband CQs whose completions
are processed in tasklet context. But this seems worth it to avoid the
tasklet overhead for CQs that don't need it.
Note that the mlx4 driver works the same way: it schedules the tasklet
in mlx4_add_cq_to_tasklet() and only if the work queue was empty before.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://patch.msgid.link/20241105204000.1807095-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gilad Naaman says:
====================
Improve neigh_flush_dev performance
This patchsets improves the performance of neigh_flush_dev.
Currently, the only way to implement it requires traversing
all neighbours known to the kernel, across all network-namespaces.
This means that some flows are slowed down as a function of neigh-scale,
even if the specific link they're handling has little to no neighbours.
In order to solve this, this patchset adds a netdev->neighbours list,
as well as making the original linked-list doubly-, so that it is
possible to unlink neighbours without traversing the hash-bucket to
obtain the previous neighbour.
The original use-case we encountered was mass-deletion of links (12K
VLANs) while there are 50K ARPs and 50K NDPs in the system; though the
slowdowns would also appear when the links are set down.
====================
Link: https://patch.msgid.link/20241107160444.2913124-1-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a mapping between a netdev and its neighoburs,
allowing for much cheaper flushes.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241107160444.2913124-7-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the now-unused neighbour::next pointer, leaving struct neighbour
solely with the hlist_node implementation.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-6-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove all usage of the bare neighbour::next pointer,
replacing them with neighbour::hash and its for_each macro.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-5-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert seq_file-related neighbour functionality to use neighbour::hash
and the related for_each macro.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-4-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce neigh_for_each_in_bucket in neighbour.h, to help iterate over
the neighbour table more succinctly.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-3-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a doubly-linked node to neighbours, so that they
can be deleted without iterating the entire bucket they're in.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-2-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Heiner Kallweit says:
====================
r8169: improve wol/suspend-related code
This series improves wol/suspend-related code parts.
====================
Link: https://patch.msgid.link/be734d10-37f7-4830-b7c2-367c0a656c08@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vendor drivers r8125/r8126 apply this additional magic setting when
enabling WAKE_PHY, so do the same here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/51130715-45be-4db5-abb7-05d87e1f5df9@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make use of new helper r8169_mod_reg8_cond() and move from a switch()
to an if() clause. Benefit is that we don't have to touch this piece of
code each time support for a new chip version is added.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/e1ccdb85-a4ed-4800-89c2-89770ff06452@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helper r8169_mod_reg8_cond() what allows to significantly simplify
__rtl8169_set_wol().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/697b197a-8eac-40c6-8847-27093cacec36@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix spelling of "probability" in tc.yaml documentation. This corrects
the max-P field description in struct tc_sfq_qopt_v1.
Signed-off-by: Abhinav Saxena <xandfury@gmail.com>
Link: https://patch.msgid.link/20241108195642.139315-1-xandfury@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typos:
- syncronized -> synchronized
- interfacs -> interface
- otherwhise -> otherwise
- ony -> only
- busses -> buses
- maxinum -> maximum
Via codespell.
Reported-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241106112513.9559-1-algonell@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When hvs is released, there is a possibility that vsk->trans may not
be initialized to NULL, which could lead to a dangling pointer.
This issue is resolved by initializing vsk->trans to NULL.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/Zys4hCj61V+mQfX2@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20241105231855.235894-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
subflow_ulp_clone()
The variable has already been assigned in the subflow_create_ctx(),
So we don't need to reassign this variable in the subflow_ulp_clone().
Signed-off-by: MoYuanhao <moyuanhao3676@163.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241106071035.2591-1-moyuanhao3676@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MCTP control protocol implementations are transport binding dependent.
Endpoint discovery is mandatory based on transport binding.
Message timing requirements are specified in each respective transport
binding specification.
However, we currently have no means to get this information from MCTP
links.
Add a IFLA_MCTP_PHYS_BINDING netlink link attribute, which represents
the transport type using the DMTF DSP0239-defined type numbers, returned
as part of RTM_GETLINK data.
We get an IFLA_MCTP_PHYS_BINDING attribute for each MCTP link, for
example:
- 0x00 (unspec) for loopback interface;
- 0x01 (SMBus/I2C) for mctpi2c%d interfaces; and
- 0x05 (serial) for mctpserial%d interfaces.
Signed-off-by: Khang Nguyen <khangng@os.amperecomputing.com>
Reviewed-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20241105071915.821871-1-khangng@os.amperecomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add NETIF_F_GSO_ESP bit to bond's gso_partial_features if all slaves
support it, such that ESP segmentation is handled by hardware if possible.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241105192721.584822-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Donald Hunter says:
====================
netlink: specs: Add neigh and rule YNL specs
Add YNL specs for the FDB neighbour tables and FIB rules from the
rtnelink families.
Example usage:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_neigh.yaml \
--dump getneigh
[{'cacheinfo': {'confirmed': 122664055,
'refcnt': 0,
'updated': 122658055,
'used': 122658055},
'dst': '0.0.0.0',
'family': 2,
'flags': set(),
'ifindex': 5,
'lladr': '',
'probes': 0,
'state': {'noarp'},
'type': 'broadcast'},
...]
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_rule.yaml \
--dump getrule --json '{"family": 2}'
[{'action': 'to-tbl',
'dst-len': 0,
'family': 2,
'flags': 0,
'protocol': 2,
'src-len': 0,
'suppress-prefixlen': '0xffffffff',
'table': 255,
'tos': 0},
... ]
====================
Link: https://patch.msgid.link/20241106090718.64713-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a YNL spec for FIB rules:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_rule.yaml \
--dump getrule --json '{"family": 2}'
[{'action': 'to-tbl',
'dst-len': 0,
'family': 2,
'flags': 0,
'protocol': 2,
'src-len': 0,
'suppress-prefixlen': '0xffffffff',
'table': 255,
'tos': 0},
... ]
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241106090718.64713-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a YNL spec for neighbour tables and neighbour entries in rtnetlink.
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_neigh.yaml \
--dump getneigh
[{'cacheinfo': {'confirmed': 122664055,
'refcnt': 0,
'updated': 122658055,
'used': 122658055},
'dst': '0.0.0.0',
'family': 2,
'flags': set(),
'ifindex': 5,
'lladr': '',
'probes': 0,
'state': {'noarp'},
'type': 'broadcast'},
...]
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241106090718.64713-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Calling synchronize_rcu() while holding rcu_read_lock() is not
permitted [1]
Move the synchronize_rcu() + dev_put() to route_doit().
Alternative would be to not use rcu_read_lock() in route_doit().
[1]
WARNING: suspicious RCU usage
6.12.0-rc5-syzkaller-01056-gf07a6e6ceb05 #0 Not tainted
-----------------------------
kernel/rcu/tree.c:4092 Illegal synchronize_rcu() in RCU read-side critical section!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz-executor427/5840:
#0: ffffffff8e937da0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:337 [inline]
#0: ffffffff8e937da0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:849 [inline]
#0: ffffffff8e937da0 (rcu_read_lock){....}-{1:2}, at: route_doit+0x3d6/0x640 net/phonet/pn_netlink.c:264
stack backtrace:
CPU: 1 UID: 0 PID: 5840 Comm: syz-executor427 Not tainted 6.12.0-rc5-syzkaller-01056-gf07a6e6ceb05 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x226/0x340 kernel/locking/lockdep.c:6821
synchronize_rcu+0xea/0x360 kernel/rcu/tree.c:4089
phonet_route_del+0xc6/0x140 net/phonet/pn_dev.c:409
route_doit+0x514/0x640 net/phonet/pn_netlink.c:275
rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6790
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2551
netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1357
netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:744
sock_write_iter+0x2d7/0x3f0 net/socket.c:1165
new_sync_write fs/read_write.c:590 [inline]
vfs_write+0xaeb/0xd30 fs/read_write.c:683
ksys_write+0x183/0x2b0 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 17a1ac0018ae ("phonet: Don't hold RTNL for route_doit().")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Remi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20241106131818.1240710-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the "tos" parameter of ip_route_output() to dscp_t. This way
we'll have a dscp_t value directly available when .flowi4_tos will
eventually be converted to dscp_t.
All ip_route_output() callers but one set this "tos" parameter to 0 and
therefore don't need to be adapted to the new prototype.
Only br_nf_pre_routing_finish() needs conversion. It can just use
ip4h_dscp() to get the DSCP field from the IPv4 header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/0f10d031dd44c70aae9bc6e19391cb30d5c2fe71.1730928699.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Heiner Kallweit says:
====================
net: phy: remove genphy_config_eee_advert
This series removes genphy_config_eee_advert().
Note: The change to bcm_config_lre_aneg() is compile-tested only
as I don't have supported hardware.
====================
Link: https://patch.msgid.link/69d22b31-57d1-4b01-bfde-0c6a1df1e310@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bcm_config_lre_aneg() doesn't use genphy_config_eee_advert() any longer.
As this was the only user, we can remove genphy_config_eee_advert() now.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/37da7f3e-b883-4c07-9881-b8c0516822b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bcm_config_lre_aneg() is the only user of genphy_config_eee_advert(),
therefore use genphy_c45_an_config_eee_aneg() instead. The resulting
functionality is equivalent, and bcm_config_lre_aneg() follows the
structure of __genphy_config_aneg().
In a follow-up step genphy_config_eee_advert() can be removed.
Note: We preserve the current behavior to ignore errors.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/6e5cd4ab-28bb-4d82-b449-fec85f3d1e8a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll use this function in bcm_config_lre_aneg(), therefore export it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/02bd7c39-7413-4433-bafc-a276089bd292@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_c45_write_eee_adv() isn't used outside phy-c45.c,
so make it static.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/d23bd784-44e6-4a15-af3a-b37379156521@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
|
