summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "6 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/Kconfig.debug: fix some messed up configurations mm: vmscan: protect shrinker idr replace with CONFIG_MEMCG kasan: don't assume percpu shadow allocations will succeed kasan: use apply_to_existing_page_range() for releasing vmalloc shadow mm/memory.c: add apply_to_existing_page_range() helper kasan: fix crashes on access to memory mapped by vm_map_ram()
2019-12-19Merge tag 'pm-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a problem related to CPU offline/online and cpufreq governors that in some system configurations may lead to a system-wide deadlock during CPU online" * tag 'pm-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Avoid leaving stale IRQ work items during CPU offline
2019-12-19xfs: don't commit sunit/swidth updates to disk if that would cause repair ↵Darrick J. Wong
failures Alex Lyakas reported[1] that mounting an xfs filesystem with new sunit and swidth values could cause xfs_repair to fail loudly. The problem here is that repair calculates the where mkfs should have allocated the root inode, based on the superblock geometry. The allocation decisions depend on sunit, which means that we really can't go updating sunit if it would lead to a subsequent repair failure on an otherwise correct filesystem. Port from xfs_repair some code that computes the location of the root inode and teach mount to skip the ondisk update if it would cause problems for repair. Along the way we'll update the documentation, provide a function for computing the minimum AGFL size instead of open-coding it, and cut down some indenting in the mount code. Note that we allow the mount to proceed (and new allocations will reflect this new geometry) because we've never screened this kind of thing before. We'll have to wait for a new future incompat feature to enforce correct behavior, alas. Note that the geometry reporting always uses the superblock values, not the incore ones, so that is what xfs_info and xfs_growfs will report. [1] https://lore.kernel.org/linux-xfs/20191125130744.GA44777@bfoster/T/#m00f9594b511e076e2fcdd489d78bc30216d72a7d Reported-by: Alex Lyakas <alex@zadara.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19xfs: split the sunit parameter update into two partsDarrick J. Wong
If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19xfs: refactor agfl length computation functionDarrick J. Wong
Refactor xfs_alloc_min_freelist to accept a NULL @pag argument, in which case it returns the largest possible minimum length. This will be used in an upcoming patch to compute the length of the AGFL at mkfs time. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19libxfs: resync with the userspace libxfsDarrick J. Wong
Prepare to resync the userspace libxfs with the kernel libxfs. There were a few things I missed -- a couple of static inline directory functions that have to be exported for xfs_repair; a couple of directory naming functions that make porting much easier if they're /not/ static inline; and a u16 usage that should have been uint16_t. None of these things are bugs in their own right; this just makes porting xfsprogs easier. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2019-12-19xfs: use bitops interface for buf log item AIL flag checkBrian Foster
The xfs_log_item flags were converted to atomic bitops as of commit 22525c17ed ("xfs: log item flags are racy"). The assert check for AIL presence in xfs_buf_item_relse() still uses the old value based check. This likely went unnoticed as XFS_LI_IN_AIL evaluates to 0 and causes the assert to unconditionally pass. Fix up the check. Signed-off-by: Brian Foster <bfoster@redhat.com> Fixes: 22525c17ed ("xfs: log item flags are racy") Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-12-19Merge branch 'bpf-fix-xsk-wakeup'Daniel Borkmann
Maxim Mikityanskiy says: ==================== This series addresses the issue described in the commit message of the first patch: lack of synchronization between XSK wakeup and destroying the resources used by XSK wakeup. The idea is similar to napi_synchronize. The series contains fixes for the drivers that implement XSK. v2 incorporates changes suggested by Björn: 1. Call synchronize_rcu in Intel drivers only if the XDP program is being unloaded. 2. Don't forget rcu_read_lock when wakeup is called from xsk_poll. 3. Use xs->zc as the condition to call ndo_xsk_wakeup. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-12-19net/ixgbe: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. ixgbe_down already calls synchronize_rcu after setting __IXGBE_DOWN. 2. After switching the XDP program, call synchronize_rcu to let ixgbe_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down. 4. Disabling UMEM sets __IXGBE_TX_DISABLED before closing hardware resources and resetting xsk_umem. Check that bit in ixgbe_xsk_wakeup to avoid using the XDP ring when it's already destroyed. synchronize_rcu is called from ixgbe_txrx_ring_disable. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-5-maximmi@mellanox.com
2019-12-19net/i40e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. i40e_down already calls synchronize_rcu. On i40e_down either __I40E_VSI_DOWN or __I40E_CONFIG_BUSY is set. Check the latter in i40e_xsk_wakeup (the former is already checked there). 2. After switching the XDP program, call synchronize_rcu to let i40e_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down (see i40e_prep_for_reset and i40e_pf_quiesce_all_vsi). 4. Disabling UMEM sets __I40E_CONFIG_BUSY, too. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-4-maximmi@mellanox.com
2019-12-19net/mlx5e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
After disabling resources necessary for XSK (the XDP program, channels, XSK queues), use synchronize_rcu to wait until the XSK wakeup function finishes, before freeing the resources. Suspend XSK wakeups during switching channels. If the XDP program is being removed, synchronize_rcu before closing the old channels to allow XSK wakeup to complete. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-3-maximmi@mellanox.com
2019-12-19xsk: Add rcu_read_lock around the XSK wakeupMaxim Mikityanskiy
The XSK wakeup callback in drivers makes some sanity checks before triggering NAPI. However, some configuration changes may occur during this function that affect the result of those checks. For example, the interface can go down, and all the resources will be destroyed after the checks in the wakeup function, but before it attempts to use these resources. Wrap this callback in rcu_read_lock to allow driver to synchronize_rcu before actually destroying the resources. xsk_wakeup is a new function that encapsulates calling ndo_xsk_wakeup wrapped into the RCU lock. After this commit, xsk_poll starts using xsk_wakeup and checks xs->zc instead of ndo_xsk_wakeup != NULL to decide ndo_xsk_wakeup should be called. It also fixes a bug introduced with the need_wakeup feature: a non-zero-copy socket may be used with a driver supporting zero-copy, and in this case ndo_xsk_wakeup should not be called, so the xs->zc check is the correct one. Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-2-maximmi@mellanox.com
2019-12-19Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: Avoid leaving stale IRQ work items during CPU offline
2019-12-19mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaroundYangbo Lu
The erratum A-009204 workaround patch was reverted because of incorrect implementation. 8b6dc6b mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support" This patch is to re-implement the workaround (add a 5 ms delay before setting SYSCTL[RSTD] to make sure all the DMA transfers are finished). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20191219032335.26528-1-yangbo.lu@nxp.com Fixes: 5dd195522562 ("mmc: sdhci-of-esdhc: add erratum A-009204 support") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18clk: qcom: Avoid SMMU/cx gdsc corner casesJeffrey Hugo
Mark the msm8998 cpu CX gdsc as votable and use the hw control to avoid corner cases with SMMU per hardware documentation. Fixes: 3f7df5baa259 ("clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191217171905.5619-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCsMatthias Kaehlcke
Commit 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") sets the VOTABLE flag in .pwrsts, but it needs to be set in .flags, fix this. Fixes: 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lkml.kernel.org/r/20191204120341.1.I9971817e83ee890d1096c43c5a6ce6ced53d5bd3@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18Merge tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm fixes from Jarkko Sakkinen: "Bunch of fixes for rc3" * tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm/tpm_ftpm_tee: add shutdown call back tpm: selftest: cleanup after unseal with wrong auth/policy test tpm: selftest: add test covering async mode tpm: fix invalid locking in NONBLOCKING mode security: keys: trusted: fix lost handle flush tpm_tis: reserve chip for duration of tpm_tis_core_init KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails KEYS: remove CONFIG_KEYS_COMPAT
2019-12-19tpm/tpm_ftpm_tee: add shutdown call backPavel Tatashin
Add shutdown call back to close existing session with fTPM TA to support kexec scenario. Add parentheses to function names in comments as specified in kdoc. Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com> Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-12-19drm/exynos: gsc: add missed component_delChuhong Yuan
The driver forgets to call component_del in remove to match component_add in probe. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.net>
2019-12-18s390/ftrace: save traced function callerVasily Gorbik
A typical backtrace acquired from ftraced function currently looks like the following (e.g. for "path_openat"): arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15a/0x3b8 ftrace_graph_caller+0x0/0x1c 0x3e0007e3c98 <- ftraced function caller (should be do_filp_open+0x7c/0xe8) do_open_execat+0x70/0x1b8 __do_execve_file.isra.0+0x7d8/0x860 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8 Note random "0x3e0007e3c98" stack value as ftraced function caller. This value causes either imprecise unwinder result or unwinding failure. That "0x3e0007e3c98" comes from r14 of ftraced function stack frame, which it haven't had a chance to initialize since the very first instruction calls ftrace code ("ftrace_caller"). (ftraced function might never save r14 as well). Nevertheless according to s390 ABI any function is called with stack frame allocated for it and r14 contains return address. "ftrace_caller" itself is called with "brasl %r0,ftrace_caller". So, to fix this issue simply always save traced function caller onto ftraced function stack frame. Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-18s390/unwind: stop gracefully at user mode pt_regs in irq stackVasily Gorbik
Consider reaching user mode pt_regs at the bottom of irq stack graceful unwinder termination. This is the case when irq/mcck/ext interrupt arrives while in user mode. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-18s390/purgatory: do not build purgatory with kcov, kasan and friendsChristian Borntraeger
the purgatory must not rely on functions from the "old" kernel, so we must disable kasan and friends. We also need to have a separate copy of string.c as the default does not build memcmp with KASAN. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-18s390/purgatory: Make sure we fail the build if purgatory has missing symbolsHans de Goede
Since we link purgatory with -r aka we enable "incremental linking" no checks for unresolved symbols are done while linking the purgatory. This commit adds an extra check for unresolved symbols by calling ld without -r before running objcopy to generate purgatory.ro. This will help us catch missing symbols in the purgatory sooner. Note this commit also removes --no-undefined from LDFLAGS_purgatory as that has no effect. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/lkml/20191212205304.191610-1-hdegoede@redhat.com Tested-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-18s390/ftrace: fix endless recursion in function_graph tracerSven Schnelle
The following sequence triggers a kernel stack overflow on s390x: mount -t tracefs tracefs /sys/kernel/tracing cd /sys/kernel/tracing echo function_graph > current_tracer [crash] This is because preempt_count_{add,sub} are in the list of traced functions, which can be demonstrated by: echo preempt_count_add >set_ftrace_filter echo function_graph > current_tracer [crash] The stack overflow happens because get_tod_clock_monotonic() gets called by ftrace but itself calls preempt_{disable,enable}(), which leads to a endless recursion. Fix this by using preempt_{disable,enable}_notrace(). Fixes: 011620688a71 ("s390/time: ensure get_clock_monotonic() returns monotonic values") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-18Merge branch 'stmmac-fixes'David S. Miller
Jose Abreu says: ==================== net: stmmac: Fixes for -net Fixes for stmmac. 1) Fixes the filtering selftests (again) for cases when the number of multicast filters are not enough. 2) Fixes SPH feature for MTU > default. 3) Fixes the behavior of accepting invalid MTU values. 4) Fixes FCS stripping for multi-descriptor packets. 5) Fixes the change of RX buffer size in XGMAC. 6) Fixes RX buffer size alignment. 7) Fixes the 16KB buffer alignment. 8) Fixes the enabling of 16KB buffer size feature. 9) Always arm the TX coalesce timer so that missed interrupts do not cause a TX queue timeout. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Always arm TX Timer at end of transmission startJose Abreu
If TX Coalesce timer is enabled we should always arm it, otherwise we may hit the case where an interrupt is missed and the TX Queue will timeout. Arming the timer does not necessarly mean it will run the tx_clean() because this function is wrapped around NAPI launcher. Fixes: 9125cdd1be11 ("stmmac: add the initial tx coalesce schema") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Enable 16KB buffer sizeJose Abreu
XGMAC supports maximum MTU that can go to 16KB. Lets add this check in the calculation of RX buffer size. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: 16KB buffer must be 16 byte alignedJose Abreu
The 16KB RX Buffer must also be 16 byte aligned. Fix it. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: RX buffer size must be 16 byte alignedJose Abreu
We need to align the RX buffer size to at least 16 byte so that IP doesn't mis-behave. This is required by HW. Changes from v2: - Align UP and not DOWN (David) Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: xgmac: Clear previous RX buffer sizeJose Abreu
When switching between buffer sizes we need to clear the previous value. Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Only the last buffer has the FCS fieldJose Abreu
Only the last received buffer contains the FCS field. Check for end of packet before trying to strip the FCS field. Fixes: 88ebe2cf7f3f ("net: stmmac: Rework stmmac_rx()") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Do not accept invalid MTU valuesJose Abreu
The maximum MTU value is determined by the maximum size of TX FIFO so that a full packet can fit in the FIFO. Add a check for this in the MTU change callback. Also check if provided and rounded MTU does not passes the maximum limit of 16K. Changes from v2: - Align MTU before checking if its valid Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Determine earlier the size of RX bufferJose Abreu
Split Header feature needs to know the size of RX buffer but current code is determining it too late. Fix this by moving the RX buffer computation to earlier stage. Changes from v2: - Do not try to align already aligned buffer size Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: selftests: Needs to check the number of Multicast regsJose Abreu
When running the MC and UC filter tests we setup a multicast address that its expected to be blocked. If the number of available multicast registers is zero, driver will always pass the multicast packets which will fail the test. Check if available multicast addresses is enough before running the tests. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: nfc: nci: fix a possible sleep-in-atomic-context bug in ↵Jia-Ju Bai
nci_uart_tty_receive() The kernel may sleep while holding a spinlock. The function call path (from bottom to top) in Linux 4.19 is: net/nfc/nci/uart.c, 349: nci_skb_alloc in nci_uart_default_recv_buf net/nfc/nci/uart.c, 255: (FUNC_PTR)nci_uart_default_recv_buf in nci_uart_tty_receive net/nfc/nci/uart.c, 254: spin_lock in nci_uart_tty_receive nci_skb_alloc(GFP_KERNEL) can sleep at runtime. (FUNC_PTR) means a function pointer is called. To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC for nci_skb_alloc(). This bug is found by a static analysis tool STCheck written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18io_uring: io_wq_submit_work() should not touch req->rwJens Axboe
I've been chasing a weird and obscure crash that was userspace stack corruption, and finally narrowed it down to a bit flip that made a stack address invalid. io_wq_submit_work() unconditionally flips the req->rw.ki_flags IOCB_NOWAIT bit, but since it's a generic work handler, this isn't valid. Normal read/write operations own that part of the request, on other types it could be something else. Move the IOCB_NOWAIT clear to the read/write handlers where it belongs. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-18usb: xhci: Fix build warning seen with CONFIG_PM=nGuenter Roeck
The following build warning is seen if CONFIG_PM is disabled. drivers/usb/host/xhci-pci.c:498:13: warning: unused function 'xhci_pci_shutdown' Fixes: f2c710f7dca8 ("usb: xhci: only set D3hot for pci device") Cc: Henry Lin <henryl@nvidia.com> Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18clk: Move clk_core_reparent_orphans() under CONFIG_OFOlof Johansson
A recent addition exposed a helper that is only used for CONFIG_OF. Move it into the CONFIG_OF zone in this file to make the compiler stop warning about an unused function. Fixes: 66d9506440bb ("clk: walk orphan list on clock provider registration") Signed-off-by: Olof Johansson <olof@lixom.net> Link: https://lkml.kernel.org/r/20191217082501.424892072D@mail.kernel.org [sboyd@kernel.org: "Simply" move the function instead] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18io_uring: don't wait when under-submittingPavel Begunkov
There is no reliable way to submit and wait in a single syscall, as io_submit_sqes() may under-consume sqes (in case of an early error). Then it will wait for not-yet-submitted requests, deadlocking the user in most cases. Don't wait/poll if can't submit all sqes Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-18Merge tag 'sound-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A slightly high amount at this time, but all good and small fixes: - A PCM core fix that initializes the buffer properly for avoiding information leaks; it is a long-standing minor problem, but good to fix better now - A few ASoC core fixes for the init / cleanup ordering issues that surfaced after the recent refactoring - Lots of SOF and topology-related fixes went in, as usual as such hot topics - Several ASoC codec and platform-specific small fixes: wm89xx, realtek, and max98090, AMD, Intel-SST - A fix for the previous incomplete regression of HD-audio, now hitting Nvidia HDMI - A few HD-audio CA0132 codec fixes" * tag 'sound-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits) ALSA: hda - Downgrade error message for single-cmd fallback ASoC: wm8962: fix lambda value ALSA: hda: Fix regression by strip mask fix ALSA: hda/ca0132 - Fix work handling in delayed HP detection ALSA: hda/ca0132 - Avoid endless loop ALSA: hda/ca0132 - Keep power on during processing DSP response ALSA: pcm: Avoid possible info leaks from PCM stream buffers ASoC: Intel: common: work-around incorrect ACPI HID for CML boards ASoC: SOF: Intel: split cht and byt debug window sizes ASoC: SOF: loader: fix snd_sof_fw_parse_ext_data ASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header ASoC: simple-card: Don't create separate link when platform is present ASoC: topology: Check return value for soc_tplg_pcm_create() ASoC: topology: Check return value for snd_soc_add_dai_link() ASoC: core: only flush inited work during free ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89 ASoC: core: Init pcm runtime work early to avoid warnings ASoC: Intel: sst: Add missing include <linux/io.h> ASoC: max98090: fix possible race conditions ASoC: max98090: exit workaround earlier if PLL is locked ...
2019-12-18Merge tag 'kvmarm-fixes-5.5-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for .5.5, take #1 - Fix uninitialised sysreg accessor - Fix handling of demand-paged device mappings - Stop spamming the console on IMPDEF sysregs - Relax mappings of writable memslots - Assorted cleanups
2019-12-18kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBDJim Mattson
The host reports support for the synthetic feature X86_FEATURE_SSBD when any of the three following hardware features are set: CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] CPUID.80000008H:EBX.AMD_SSBD[bit 24] CPUID.80000008H:EBX.VIRT_SSBD[bit 25] Either of the first two hardware features implies the existence of the IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does not. Therefore, CPUID.80000008H:EBX.AMD_SSBD[bit 24] should only be set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host. Fixes: 4c6903a0f9d76 ("KVM: x86: fix reporting of AMD speculation bug CPUID leaf") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jacob Xu <jacobhxu@google.com> Reviewed-by: Peter Shier <pshier@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBDJim Mattson
The host reports support for the synthetic feature X86_FEATURE_SSBD when any of the three following hardware features are set: CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] CPUID.80000008H:EBX.AMD_SSBD[bit 24] CPUID.80000008H:EBX.VIRT_SSBD[bit 25] Either of the first two hardware features implies the existence of the IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host. Fixes: 0c54914d0c52a ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jacob Xu <jacobhxu@google.com> Reviewed-by: Peter Shier <pshier@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18iommu/dma: Relax locking in iommu_dma_prepare_msi()Robin Murphy
Since commit ece6e6f0218b ("iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts"), iommu_dma_prepare_msi() should no longer have to worry about preempting itself, nor being called in atomic context at all. Thus we can downgrade the IRQ-safe locking to a simple mutex to avoid angering the new might_sleep() check in iommu_map(). Reported-by: Qian Cai <cai@lca.pw> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-18perf/smmuv3: Remove the leftover put_cpu() in error pathHanjun Guo
In smmu_pmu_probe(), there is put_cpu() in the error path, which is wrong because we use raw_smp_processor_id() to get the cpu ID, not get_cpu(), remove it. While we are at it, kill 'out_cpuhp_err' altogether and just return err if we fail to add the hotplug instance. Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-18iommu/vt-d: Remove incorrect PSI capability checkLu Baolu
The PSI (Page Selective Invalidation) bit in the capability register is only valid for second-level translation. Intel IOMMU supporting scalable mode must support page/address selective IOTLB invalidation for first-level translation. Remove the PSI capability check in SVA cache invalidation code. Fixes: 8744daf4b0699 ("iommu/vt-d: Remove global page flush support") Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-18staging: wfx: fix wrong error messageJérôme Pouiller
The driver checks that the number of retries made by the device is coherent with the rate policy. However, this check make sense only if the device has returned RETRY_EXCEEDED. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-11-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix hif_set_mfp() with big endian hostsJérôme Pouiller
struct hif_mib_protected_mgmt_policy is an array of u8. There is no reason to swap its bytes. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-10-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: detect race condition in WEP authenticationJérôme Pouiller
Current code has a special case to handle association with WEP. Before to rework the tx data handling, let's try to detect any possible misuse of this code. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-9-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: ensure that retry policy always fallbacks to MCS0 / 1MbpsJérôme Pouiller
When not using HT mode, minstrel always includes 1Mbps as fallback rate. But, when using HT mode, this fallback is not included. Yet, it seems that it could save some frames. So, this patch add it unconditionally. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-8-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 00:55:09 +0000