summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-15net: phy: Fix return value check in xgmiitorgmii_probe()Wei Yongjun
In case of error, the function of_parse_phandle() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15power_supply: tps65217-charger: fix missing platform_set_drvdata()Wei Yongjun
Add missing platform_set_drvdata() in tps65217_charger_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. This is detected by Coccinelle semantic patch. Fixes: 3636859b280c ("power_supply: Add support for tps65217-charger") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-08-15tipc: fix NULL pointer dereference in shutdown()Vegard Nossum
tipc_msg_create() can return a NULL skb and if so, we shouldn't try to call tipc_node_xmit_skb() on it. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 30298 Comm: trinity-c0 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800baf09980 ti: ffff8800595b8000 task.ti: ffff8800595b8000 RIP: 0010:[<ffffffff830bb46b>] [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP: 0018:ffff8800595bfce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003023b0e0 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffffff83d12580 RBP: ffff8800595bfd78 R08: ffffed000b2b7f32 R09: 0000000000000000 R10: fffffbfff0759725 R11: 0000000000000000 R12: 1ffff1000b2b7f9f R13: ffff8800595bfd58 R14: ffffffff83d12580 R15: dffffc0000000000 FS: 00007fcdde242700(0000) GS:ffff88011af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcddde1db10 CR3: 000000006874b000 CR4: 00000000000006e0 DR0: 00007fcdde248000 DR1: 00007fcddd73d000 DR2: 00007fcdde248000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 Stack: 0000000000000018 0000000000000018 0000000041b58ab3 ffffffff83954208 ffffffff830bb400 ffff8800595bfd30 ffffffff8309d767 0000000000000018 0000000000000018 ffff8800595bfd78 ffffffff8309da1a 00000000810ee611 Call Trace: [<ffffffff830c84a3>] tipc_shutdown+0x553/0x880 [<ffffffff825b4a3b>] SyS_shutdown+0x14b/0x170 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 90 00 b4 0b 83 c7 00 f1 f1 f1 f1 4c 8d 6d e0 c7 40 04 00 00 00 f4 c7 40 08 f3 f3 f3 f3 48 89 d8 48 c1 e8 03 c7 45 b4 00 00 00 00 <80> 3c 30 00 75 78 48 8d 7b 08 49 8d 75 c0 48 b8 00 00 00 00 00 RIP [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP <ffff8800595bfce8> ---[ end trace 57b0484e351e71f1 ]--- I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure userspace is equipped to handle that. Anyway, this is better than a GPF and looks somewhat consistent with other tipc_msg_create() callers. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15Merge branch 'hv_netvsc-VF-removal-fixes'David S. Miller
Vitaly Kuznetsov says: ==================== hv_netvsc: fixes for VF removal path Kernel crash is reported after VF is removed and detached from netvsc device. Turns out we have multiple different (but related) issues on the VF removal path which I'm trying to address with PATCHes 2-5 of this series. PATCH1 is required to support the change. Changes since v1: - Re-arrange patches in the series to not introduce new issues [David Miller] - Add PATCH5 which fixes a new issue I discovered while testing. - Add Haiyang' A-b tags to PATCH1-4 With regards to Stephen's suggestion: I believe that switching to using RCU and eliminating vf_use_cnt/vf_inject is the right thing to do long-term, we can either put this on top of this series or do it later in net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15hv_netvsc: fix bonding devices check in netvsc_netdev_event()Vitaly Kuznetsov
Bonding driver sets IFF_BONDING on both master (the bonding device) and slave (the real NIC) devices and in netvsc_netdev_event() we want to skip master devices only. Currently, there is an uncertainty when a slave interface is removed: if bonding module comes first in netdev_chain it clears IFF_BONDING flag on the netdev and netvsc_netdev_event() correctly handles NETDEV_UNREGISTER event, but in case netvsc comes first on the chain it sees the device with IFF_BONDING still attached and skips it. As we still hold vf_netdev pointer to the device we crash on the next inject. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15hv_netvsc: protect module refcount by checking net_device_ctx->vf_netdevVitaly Kuznetsov
We're not guaranteed to see NETDEV_REGISTER/NETDEV_UNREGISTER notifications only once per VF but we increase/decrease module refcount unconditionally. Check vf_netdev to make sure we don't take/release it twice. We presume that only one VF per netvsc device may exist. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15hv_netvsc: reset vf_inject on VF removalVitaly Kuznetsov
We reset vf_inject on VF going down (netvsc_vf_down()) but we don't on VF removal (netvsc_unregister_vf()) so vf_inject stays 'true' while vf_netdev is already NULL and we're trying to inject packets into NULL net device in netvsc_recv_callback() causing kernel to crash. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15hv_netvsc: avoid deadlocks between rtnl lock and vf_use_cnt waitVitaly Kuznetsov
Here is a deadlock scenario: - netvsc_vf_up() schedules netvsc_notify_peers() work and quits. - netvsc_vf_down() runs before netvsc_notify_peers() gets executed. As it is being executed from netdev notifier chain we hold rtnl lock when we get here. - we enter while (atomic_read(&net_device_ctx->vf_use_cnt) != 0) loop and wait till netvsc_notify_peers() drops vf_use_cnt. - netvsc_notify_peers() starts on some other CPU but netdev_notify_peers() will hang on rtnl_lock(). - deadlock! Instead of introducing additional synchronization I suggest we drop gwrk.dwrk completely and call NETDEV_NOTIFY_PEERS directly. As we're acting under rtnl lock this is legitimate. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15hv_netvsc: don't lose VF informationVitaly Kuznetsov
struct netvsc_device is not suitable for storing VF information as this structure is being destroyed on MTU change / set channel operation (see rndis_filter_device_remove()). Move all VF related stuff to struct net_device_context which is persistent. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15net: hns: mdio->irq is an array, so no need to check if it is nullColin Ian King
The null check on mdio->irq is redundant since mdio->irq is an array of PHY_MAX_ADDR ints and hence can never be null. Remove the redundant check. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15switchdev: Put export declaration in the right placeOr Gerlitz
Move exporting of switchdev_port_same_parent_id to be right below it and not elsewhere. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15gre: set inner_protocol on xmitSimon Horman
Ensure that the inner_protocol is set on transmit so that GSO segmentation, which relies on that field, works correctly. This is achieved by setting the inner_protocol in gre_build_header rather than each caller of that function. It ensures that the inner_protocol is set when gre_fb_xmit() is used to transmit GRE which was not previously the case. I have observed this is not the case when OvS transmits GRE using lwtunnel metadata (which it always does). Fixes: 38720352412a ("gre: Use inner_proto to obtain inner header protocol") Cc: Pravin Shelar <pshelar@ovn.org> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15Merge branch 'qed-janitorial'David S. Miller
Yuval Mintz says: ==================== qed*: Janitorial series [semantic & prints] Some day 1 slips in coding style exist in the qed* code [incorrect alignments, conditions using (== 0), etc.]. This series comes to address those, and do some additional cosmetic changes along the way [such as reducing the number of lines for function declerations]. The series is broken to 3 parts - purely semantic changes, cosmetic changes that required minor changes in the code, and print-related changes. All-in-all, no real change in driver behavior is expected. [This is a repost; Original was sent when net-next closed]. Please consider applying this to `net-next'. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15qed*: Add and modify some printsYuval Mintz
This patch touches various prints in the driver - it reduces the verbosity of some prints [which were previously logged by default] while adding several new debug prints and modifying others. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15qed*: Trivial modificationsYuval Mintz
Change qed* code in trivial manner; This isn't necessarily semantic-only, but the end result is the same, i.e., no change should occur from user perspective. Changes include: - Using temporary variables to better fit 80-character restrictions. - Removal of unused variables & code with no effect. [plus some additional minor modifications]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15qed*: Semantic changesYuval Mintz
Make semantic-only adjustments to qed* drivers, such as: - Changes in code indentation. - Usage of BIT() macro. - re-naming of variables. - Re-ordering of variable declerations. - Removal of (== 0) and (!= 0) in conditions. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15Merge tag 'iommu-fixes-v4.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Some functions defined in a header file for the mediatek driver were not marked inline. Fix that oversight. - Fix a potential crash in the ARM64 dma-mapping code when freeing a partially initialized domain. - Another fix for ARM64 dma-mapping to respect IOMMU mapping constraints when allocating IOVA addresses. * tag 'iommu-fixes-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: Respect IOMMU aperture when allocating iommu/dma: Don't put uninitialised IOVA domains iommu/mediatek: Mark static functions in headers inline
2016-08-15Merge tag 'edac_fixes_for_4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fix from Borislav Petkov: "A fix to sb_edac correcting channel reporting on Knights Landing" * tag 'edac_fixes_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, sb_edac: Fix channel reporting on Knights Landing
2016-08-15net: ipv6: Fix ping to link-local addresses.Lorenzo Colitti
ping_v6_sendmsg does not set flowi6_oif in response to sin6_scope_id or sk_bound_dev_if, so it is not possible to use these APIs to ping an IPv6 address on a different interface. Instead, it sets flowi6_iif, which is incorrect but harmless. Stop setting flowi6_iif, and support various ways of setting oif in the same priority order used by udpv6_sendmsg. Tested: https://android-review.googlesource.com/#/c/254470/ Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15fjes: Delete owner assignmentMarkus Elfring
The field "owner" is set by core. Thus delete an extra initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15rhashtable: fix shift by 64 when shrinkingVegard Nossum
I got this: ================================================================================ UBSAN: Undefined behaviour in ./include/linux/log2.h:63:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 721 Comm: kworker/1:1 Not tainted 4.8.0-rc1+ #87 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Workqueue: events rht_deferred_worker 0000000000000000 ffff88011661f8d8 ffffffff82344f50 0000000041b58ab3 ffffffff84f98000 ffffffff82344ea4 ffff88011661f900 ffff88011661f8b0 0000000000000001 ffff88011661f6b8 dffffc0000000000 ffffffff867f7640 Call Trace: [<ffffffff82344f50>] dump_stack+0xac/0xfc [<ffffffff82344ea4>] ? _atomic_dec_and_lock+0xc4/0xc4 [<ffffffff8242f5b8>] ubsan_epilogue+0xd/0x8a [<ffffffff82430c41>] __ubsan_handle_shift_out_of_bounds+0x255/0x29a [<ffffffff824309ec>] ? __ubsan_handle_out_of_bounds+0x180/0x180 [<ffffffff84003436>] ? nl80211_req_set_reg+0x256/0x2f0 [<ffffffff812112ba>] ? print_context_stack+0x8a/0x160 [<ffffffff81200031>] ? amd_pmu_reset+0x341/0x380 [<ffffffff823af808>] rht_deferred_worker+0x1618/0x1790 [<ffffffff823af808>] ? rht_deferred_worker+0x1618/0x1790 [<ffffffff823ae1f0>] ? rhashtable_jhash2+0x370/0x370 [<ffffffff8134c12d>] ? process_one_work+0x6fd/0x1970 [<ffffffff8134c1cf>] process_one_work+0x79f/0x1970 [<ffffffff8134c12d>] ? process_one_work+0x6fd/0x1970 [<ffffffff8134ba30>] ? try_to_grab_pending+0x4c0/0x4c0 [<ffffffff8134d564>] ? worker_thread+0x1c4/0x1340 [<ffffffff8134d8ff>] worker_thread+0x55f/0x1340 [<ffffffff845e904f>] ? __schedule+0x4df/0x1d40 [<ffffffff8134d3a0>] ? process_one_work+0x1970/0x1970 [<ffffffff8134d3a0>] ? process_one_work+0x1970/0x1970 [<ffffffff813642f7>] kthread+0x237/0x390 [<ffffffff813640c0>] ? __kthread_parkme+0x280/0x280 [<ffffffff845f8c93>] ? _raw_spin_unlock_irq+0x33/0x50 [<ffffffff845f95df>] ret_from_fork+0x1f/0x40 [<ffffffff813640c0>] ? __kthread_parkme+0x280/0x280 ================================================================================ roundup_pow_of_two() is undefined when called with an argument of 0, so let's avoid the call and just fall back to ht->p.min_size (which should never be smaller than HASH_MIN_SIZE). Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15pptp: Refactor the struct and macros of PPTP codesGao Feng
1. Use struct gre_base_hdr directly in pptp_gre_header instead of duplicated members; 2. Use existing macros like GRE_KEY, GRE_SEQ, and so on instead of duplicated macros defined by PPTP; 3. Add new macros like GRE_IS_ACK/SEQ and so on instead of PPTP_GRE_IS_A/S and so on; Signed-off-by: Gao Feng <fgao@ikuai8.com> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14mlxsw: spectrum_router: Fix use after freeVincent
In mlxsw_sp_router_fib4_add_info_destroy(), the fib_entry pointer is used after it has been freed by mlxsw_sp_fib_entry_destroy(). Use a temporary variable to fix this. Fixes: 61c503f976b5449e ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14net: dsa: b53: remove .owner and .bus fields for driverWei Yongjun
Remove .owner and .bus fields since module_spi_driver() is used which set them automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14net: macb: add missing free_netdev() on error in macb_probe()Wei Yongjun
Add the missing free_netdev() before return from function macb_probe() in the platform_get_irq() error handling case. Fixes: c69618b3e4f2 ("net/macb: fix probe sequence to setup clocks earlier") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14qed: Fix possible memory leak in qed_dcbnl_get_ieee_pfc()Wei Yongjun
'dcbx_info is malloced in qed_dcbnl_get_ieee_pfc() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: a1d8d8a51e83 ("qed: Add dcbnl support.") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14Merge branch 'cxgb4-IFLA_VF_MAC'David S. Miller
Hariprasad Shenai says: ==================== cxgb4: Add support for IFLA_VF_MAC We're struggling to implement the PCI SR-IOV management features for administering Virtual Functions which represent networking devices using the current Linux APIs. The problem is that these APIs incorporate all sorts of assumptions which don't match chelsio networking cards. For instance, the current APIs assume a 1-to-1 mapping of Network Ports, Physical Functions and the SR-IOV Virtual Functions of those Physical Functions. This is not the case with our cards where any Virtual Function can be hooked up to any Port -- or any number of Ports the current Linux APIs also assume only 1 Network Interface/Port can be accessed per Virtuali Function. Another issue is that these APIs assume that the Administrative Driver is attached to the Physical Function Associated with a Virtual Function. This is not the case with our card where all administration is performed by a Driver which is not attached to any of the Physical Functions which have SR-IOV PCI Capabilities. Another consequence of these assumptions is the inability to utilize all of the cards SR-IOV resources. For instance, our cards have SR-IOV Capabilities on Physical Functions 0..3 and the administrative Driver attaches to Physical Function 4. Each of the Physical Functions 0..3 can support up to 16 Virtual Functions. With the current Linux APIs, a 2-Port card would only be able to use the Virtual Functions on Physical Function 0..1 and not allow the Virtual Functions on Physical Functions 2..3 to be used since there are no Ports 2..3 on a 2-Port card. Patch 1/2 adds support to create management interface for each PF to control thier corresponding VF's. Patch 2/2 adds support for ndo_set_vf_mac. This patch series has been created against net-next tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. V5: Fix warning reported by kbuild bot when CONFIG_PCI_IOV isn't defined. V4: Handle memory allocation failure for adapter->mbox_log in init_one(). Based on review comment by Yuval Mintz <Yuval.Mintz@qlogic.com> V3: Based on review comment by Yuval Mintz, removed extra parameter pf added to IFLA_VF API's and created a net_device corresponding to each PF for controling their VF. Based on review comment by Yuval Mintz <Yuval.Mintz@qlogic.com> V2: Fixed check for MAC address in Patch 2/2, based on review comment by Yuval Mintz <Yuval.Mintz@qlogic.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14cxgb4/cxgb4vf: Add set VF mac address supportHariprasad Shenai
Add ndo_set_vf_mac support which allows to set the MAC address for cxgb4vf interfaces from the host Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14cxgb4: Add control net_device for configuring PCIe VFHariprasad Shenai
Issue: For instance, the current APIs assume a 1-to-1 mapping of Network Ports, Physical Functions and the SR-IOV Virtual Functions of those Physical Functions. This is not the case with our cards where any Virtual Function can be hooked up to any Port -- or any number of Ports the current Linux APIs also assume only 1 Network Interface/Port can be accessed per Virtual Function. Another issue is that these APIs assume that the Administrative Driver is attached to the Physical Function Associated with a Virtual Function. This is not the case with our card where all administration is performed by a Driver which is not attached to any of the Physical Functions which have SR-IOV PCI Capabilities. Another consequence of these assumptions is the inability to utilize all of the cards SR-IOV resources. For instance, our cards have SR-IOV Capabilities on Physical Functions 0..3 and the administrative Driver attaches to Physical Function 4. Each of the Physical Functions 0..3 can support up to 16 Virtual Functions. With the current Linux APIs, a 2-Port card would only be able to use the Virtual Functions on Physical Function 0..1 and not allow the Virtual Functions on Physical Functions 2..3 to be used since there are no Ports 2..3 on a 2-Port card. Fix: Since the control node is always the netdevice for all VF ACL commands. Created a dummy netdevice for each Physical Function from 0 to 3 through which one could control their VFs. The device won't be associated with any port, since it doesn't need to transmit/receive. Its purely used for VF management purpose only. The device will be registered only when VF for a particular PF is configured using PCI sysfs interface and unregistered while pci_disable_sriov() for the PF is called. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14rhashtable: avoid large lock-array allocationsFlorian Westphal
Sander reports following splat after netfilter nat bysrc table got converted to rhashtable: swapper/0: page allocation failure: order:3, mode:0x2084020(GFP_ATOMIC|__GFP_COMP) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc1 [..] [<ffffffff811633ed>] warn_alloc_failed+0xdd/0x140 [<ffffffff811638b1>] __alloc_pages_nodemask+0x3e1/0xcf0 [<ffffffff811a72ed>] alloc_pages_current+0x8d/0x110 [<ffffffff8117cb7f>] kmalloc_order+0x1f/0x70 [<ffffffff811aec19>] __kmalloc+0x129/0x140 [<ffffffff8146d561>] bucket_table_alloc+0xc1/0x1d0 [<ffffffff8146da1d>] rhashtable_insert_rehash+0x5d/0xe0 [<ffffffff819fcfff>] nf_nat_setup_info+0x2ef/0x400 The failure happens when allocating the spinlock array. Even with GFP_KERNEL its unlikely for such a large allocation to succeed. Thomas Graf pointed me at inet_ehash_locks_alloc(), so in addition to adding NOWARN for atomic allocations this also makes the bucket-array sizing more conservative. In commit 095dc8e0c3686 ("tcp: fix/cleanup inet_ehash_locks_alloc()"), Eric Dumazet says: "Budget 2 cache lines per cpu worth of 'spinlocks'". IOW, consider size needed by a single spinlock when determining number of locks per cpu. So with 64 byte per cacheline and 4 byte per spinlock this gives 32 locks per cpu. Resulting size of the lock-array (sizeof(spinlock) == 4): cpus: 1 2 4 8 16 32 64 old: 1k 1k 4k 8k 16k 16k 16k new: 128 256 512 1k 2k 4k 8k 8k allocation should have decent chance of success even with GFP_ATOMIC, and should not fail with GFP_KERNEL. With 72-byte spinlock (LOCKDEP): cpus : 1 2 old: 9k 18k new: ~2k ~4k Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14Merge branch 'proc-per-ns'David S. Miller
Dmitry Torokhov says: ==================== Make /proc per net namespace objects belong to container Currently [almost] all /proc objects belong to the global root, even if data belongs to a given namespace within a container and (at least for sysctls) we work around permssions checks to allow container's root to access the data. This series changes ownership of net namespace /proc objects (/proc/net/self/* and /proc/sys/net/*) to be container's root and not global root when there exists mapping for container's root in user namespace. This helps when running Android CTS in a container, but I think it makes sense regardless. Changes from V1: - added fix for crash when !CONFIG_NET_NS (new patch #1) - addressed Eric'c comments for error handling style in patch #3 and added his Ack - adjusted patch #2 to use the same style of erro handling - sent out as series instead of separate patches ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14net: make net namespace sysctls belong to container's ownerDmitry Torokhov
If net namespace is attached to a user namespace let's make container's root owner of sysctls affecting said network namespace instead of global root. This also allows us to clean up net_ctl_permissions() because we do not need to fudge permissions anymore for the container's owner since it now owns the objects in question. Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14proc: make proc entries inherit ownership from parentDmitry Torokhov
There are certain parameters that belong to net namespace and that are exported in /proc. They should be controllable by the container's owner, but are currently owned by global root and thus not available. Let's change proc code to inherit ownership of parent entry, and when create per-ns "net" proc entry set it up as owned by container's owner. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14netns: do not call pernet ops for not yet set up init_net namespaceDmitry Torokhov
When CONFIG_NET_NS is disabled, registering pernet operations causes init() to be called immediately with init_net as an argument. Unfortunately this leads to some pernet ops, such as proc_net_ns_init() to be called too early, when init_net namespace has not been fully initialized. This causes issues when we want to change pernet ops to use more data from the net namespace in question, for example reference user namespace that owns our network namespace. To fix this we could either play game of musical chairs and rearrange init order, or we could do the same as when CONFIG_NET_NS is enabled, and postpone calling pernet ops->init() until namespace is set up properly. Note that we can not simply undo commit ed160e839d2e ("[NET]: Cleanup pernet operation without CONFIG_NET_NS") and use the same implementations for __register_pernet_operations() and __unregister_pernet_operations(), because many pernet ops are marked as __net_initdata and will be discarded, which wreaks havoc on our ops lists. Here we rely on the fact that we only use lists until init_net is fully initialized, which happens much earlier than discarding __net_initdata sections. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14Linux 4.8-rc2v4.8-rc2Linus Torvalds
2016-08-15tools/virtio: add dma stubsMichael S. Tsirkin
Fixes build after recent IOMMU-related changes, mustly by adding more stubs. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-15vhost/test: fix after swiotlb changesMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-15vhost/vsock: drop space available check for TX vqGerard Garcia
Remove unnecessary use of enable/disable callback notifications and the incorrect more space available check. The virtio_transport_tx_work handles when the TX virtqueue has more buffers available. Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-14Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - Fix a race condition when updating cooling device, which may lead to a situation where a thermal governor never updates the cooling device. From Michele Di Giorgio. - Fix a zero division error when disabling the forced idle injection from the intel powerclamp. From Petr Mladek. - Add suspend/resume callback for intel_pch_thermal thermal driver. From Srinivas Pandruvada. - Another two fixes for clocking cooling driver and hwmon sysfs I/F. From Michele Di Giorgio and Kuninori Morimoto. [ Hmm. That suspend/resume callback for intel_pch_thermal doesn't look like a fix, but I'm letting it slide.. - Linus ] * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: clock_cooling: Fix missing mutex_init() thermal: hwmon: EXPORT_SYMBOL_GPL for thermal hwmon sysfs thermal: fix race condition when updating cooling device thermal/powerclamp: Prevent division by zero when counting interval thermal: intel_pch_thermal: Add suspend/resume callback
2016-08-15ringtest: test build fixMichael S. Tsirkin
Recent changes to ptr_ring broke the ringtest which lacks a likely() stub. Fix it up. Fixes: 982fb490c298896d15e9323a882f34a57c11ff56 ("ptr_ring: support zero length ring") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fix from Greg Ungerer: "This contains only a single fix for a register corruption problem on certain types of m68k flat format binaries" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix user a5 register being overwritten
2016-08-13Merge tag 'fixes-for-linus-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull h8300 and unicore32 architecture fixes from Guenter Roeck: "Two patches to fix h8300 and unicore32 builds. unicore32 builds have been broken since v4.6. The fix has been available in -next since March of this year. h8300 builds have been broken since the last commit window. The fix has been available in -next since June of this year" * tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: h8300: Add missing include file to asm/io.h unicore32: mm: Add missing parameter to arch_vma_access_permitted
2016-08-13Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - support for nr_cpus= command line argument (maxcpus was previously changed to allow secondary CPUs to be hot-plugged) - ARM PMU interrupt handling fix - fix potential TLB conflict in the hibernate code - improved handling of EL1 instruction aborts (better error reporting) - removal of useless jprobes code for stack saving/restoring - defconfig updates * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: enable CONFIG_LOCALVERSION_AUTO arm64: defconfig: add options for virtualization and containers arm64: hibernate: handle allocation failures arm64: hibernate: avoid potential TLB conflict arm64: Handle el1 synchronous instruction aborts cleanly arm64: Remove stack duplicating code from jprobes drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property drivers/perf: arm-pmu: convert arm_pmu_mutex to spinlock arm64: Support hard limit of cpu count by nr_cpus
2016-08-13net: phy: initialize rc to zero to avoid returning garbage valueColin Ian King
In the case where phydev->interrupts is not PHY_INTERRUPT_ENABLED function vsc85xx_ack_interrupt is returning an uninitialized garbage value. Fix this by initializing rc to zero. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: remove type_check from dev_get_nest_level()Sabrina Dubroca
The idea for type_check in dev_get_nest_level() was to count the number of nested devices of the same type (currently, only macvlan or vlan devices). This prevented the false positive lockdep warning on configurations such as: eth0 <--- macvlan0 <--- vlan0 <--- macvlan1 However, this doesn't prevent a warning on a configuration such as: eth0 <--- macvlan0 <--- vlan0 eth1 <--- vlan1 <--- macvlan1 In this case, all the locks end up with a nesting subclass of 1, so lockdep thinks that there is still a deadlock: - in the first case we have (macvlan_netdev_addr_lock_key, 1) and then take (vlan_netdev_xmit_lock_key, 1) - in the second case, we have (vlan_netdev_xmit_lock_key, 1) and then take (macvlan_netdev_addr_lock_key, 1) By removing the linktype check in dev_get_nest_level() and always incrementing the nesting depth, lockdep considers this configuration valid. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13macsec: fix lockdep splats when nesting devicesSabrina Dubroca
Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: bfin_mac: Fix a few spelling fixesLABBE Corentin
This patch respell some word badly spelled. - Invidate instead of Invalidate - proble instead of probe Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: ipv6: Do not keep IPv6 addresses when IPv6 is disabledMike Manning
If IPv6 is disabled when the option is set to keep IPv6 addresses on link down, userspace is unaware of this as there is no such indication via netlink. The solution is to remove the IPv6 addresses in this case, which results in netlink messages indicating removal of addresses in the usual manner. This fix also makes the behavior consistent with the case of having IPv6 disabled first, which stops IPv6 addresses from being added. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: Mike Manning <mmanning@brocade.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13Merge tag 'mac80211-next-for-davem-2016-08-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Not much for -next so far, but here it goes: * send more nl80211 events for interfaces * remove useless network/transport offset mangling code * validate beacon intervals identically for all interface types * use driver rate estimates for mesh * fix a compiler type/signedness warning ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net/sctp: always initialise sctp_ht_iter::start_failVegard Nossum
sctp_transport_seq_start() does not currently clear iter->start_fail on success, but relies on it being zero when it is allocated (by seq_open_net()). This can be a problem in the following sequence: open() // allocates iter (and implicitly sets iter->start_fail = 0) read() - iter->start() // fails and sets iter->start_fail = 1 - iter->stop() // doesn't call sctp_transport_walk_stop() (correct) read() again - iter->start() // succeeds, but doesn't change iter->start_fail - iter->stop() // doesn't call sctp_transport_walk_stop() (wrong) We should initialize sctp_ht_iter::start_fail to zero if ->start() succeeds, otherwise it's possible that we leave an old value of 1 there, which will cause ->stop() to not call sctp_transport_walk_stop(), which causes all sorts of problems like not calling rcu_read_unlock() (and preempt_enable()), eventually leading to more warnings like this: BUG: sleeping function called from invalid context at mm/slab.h:388 in_atomic(): 0, irqs_disabled(): 0, pid: 16551, name: trinity-c2 Preemption disabled at:[<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150 [<ffffffff81149abb>] preempt_count_add+0x1fb/0x280 [<ffffffff83295892>] _raw_spin_lock+0x12/0x40 [<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150 [<ffffffff82ec665f>] sctp_transport_walk_start+0x2f/0x60 [<ffffffff82edda1d>] sctp_transport_seq_start+0x4d/0x150 [<ffffffff81439e50>] traverse+0x170/0x850 [<ffffffff8143aeec>] seq_read+0x7cc/0x1180 [<ffffffff814f996c>] proc_reg_read+0xbc/0x180 [<ffffffff813d0384>] do_loop_readv_writev+0x134/0x210 [<ffffffff813d2a95>] do_readv_writev+0x565/0x660 [<ffffffff813d6857>] vfs_readv+0x67/0xa0 [<ffffffff813d6c16>] do_preadv+0x126/0x170 [<ffffffff813d710c>] SyS_preadv+0xc/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83296225>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Notice that this is a subtly different stacktrace from the one in commit 5fc382d875 ("net/sctp: terminate rhashtable walk correctly"). Cc: Xin Long <lucien.xin@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-By: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 19:46:01 +0000