summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-01mm: Always downgrade mmap_lock if requestedMatthew Wilcox (Oracle)
Now that stack growth must always hold the mmap_lock for write, we can always downgrade the mmap_lock to read and safely unmap pages from the page table, even if we're next to a stack. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-01xtensa: fix lock_mm_and_find_vma in case VMA not foundMax Filippov
MMU version of lock_mm_and_find_vma releases the mm lock before returning when VMA is not found. Do the same in noMMU version. This fixes hang on an attempt to handle protection fault. Fixes: d85a143b69ab ("xtensa: fix NOMMU build with lock_mm_and_find_vma() conversion") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-01selftests: Test RISC-V Vector's first-use handlerAndy Chiu
This add a test to check if the kernel zero-initializes all V registers after the first-use trap handler returns. If V registers are not zero-initialized, then the test should fail one out of several runs: ``` root@sifive-fpga:~# ./v_initval_nolibc # vl = 256 not ok 1 detect stale values on v-regesters 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4c 41 4e 47 3d 43 0 50 41 54 48 3d 2f 75 73 72 2f 6c 6f 63 61 6c 2f 73 62 69 6e 3a 2f 75 73 72 2f 6c 6f 63 61 6c 2f 62 69 6e 3a 2f 75 73 72 ff ff 81 0 0 0 0 0 0 0 0 0 0 0 0 0 ``` Otherwise, the test passes without errors each run. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230627015556.12329-3-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01riscv: vector: clear V-reg in the first-use trapAndy Chiu
If there is no context switch happens after we enable V for a process, then we return to user space with whatever left on the CPU's V registers accessible to the process. The leaked data could belong to another process's V-context saved from last context switch, impacting process's confidentiality on the system. To prevent this from happening, we clear V registers by restoring zero'd V context after turining on V. Fixes: cd054837243b ("riscv: Allocate user's vector context in the first-use trap") Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230627015556.12329-2-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01riscv: vector: only enable interrupts in the first-use trapAndy Chiu
The function irqentry_exit_to_user_mode() must be called with interrupt disabled. The caller of do_trap_insn_illegal() also assumes running without interrupts. So, we should turn off interrupts after riscv_v_first_use_handler() returns. Fixes: cd054837243b ("riscv: Allocate user's vector context in the first-use trap") Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230625155416.18629-1-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01Merge patch series "riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION"Palmer Dabbelt
Jisheng Zhang <jszhang@kernel.org> says: When trying to run linux with various opensource riscv core on resource limited FPGA platforms, for example, those FPGAs with less than 16MB SDRAM, I want to save mem as much as possible. One of the major technologies is kernel size optimizations, I found that riscv does not currently support HAVE_LD_DEAD_CODE_DATA_ELIMINATION, which passes -fdata-sections, -ffunction-sections to CFLAGS and passes the --gc-sections flag to the linker. This not only benefits my case on FPGA but also benefits defconfigs. Here are some notable improvements from enabling this with defconfigs: nommu_k210_defconfig: text data bss dec hex 1112009 410288 59837 1582134 182436 before 962838 376656 51285 1390779 1538bb after rv32_defconfig: text data bss dec hex 8804455 2816544 290577 11911576 b5c198 before 8692295 2779872 288977 11761144 b375f8 after defconfig: text data bss dec hex 9438267 3391332 485333 13314932 cb2b74 before 9285914 3350052 483349 13119315 c82f53 after patch1 and patch2 are clean ups. patch3 fixes a typo. patch4 finally enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for riscv. * b4-shazam-merge: riscv: disable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for LLD riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION vmlinux.lds.h: use correct .init.data.* section name riscv: vmlinux-xip.lds.S: remove .alternative section riscv: move options to keep entries sorted riscv: Fix orphan section warnings caused by kernel/pi Link: https://lore.kernel.org/r/20230523165502.2592-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01RISC-V: Fix up some vector state related build failuresPalmer Dabbelt
I get a few build failures along the lines of ./arch/riscv/include/uapi/asm/sigcontext.h:19:36: error: field ‘v_state’ has incomplete type 19 | struct __riscv_v_ext_state v_state; | ^~~~~~~ ./arch/riscv/include/uapi/asm/sigcontext.h:32:49: error: field ‘sc_extdesc’ has incomplete type 32 | struct __riscv_extra_ext_header sc_extdesc; The V structures in question are defined for !assembly, so let's just do so for the others. Fixes: 8ee0b41898fa ("riscv: signal: Add sigcontext save/restore for vector") Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230619172101.18692-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01RISC-V: Document that V registers are clobbered on syscallsPalmer Dabbelt
This is included in the ISA manual, but it's pretty common for bits of the ISA manual that are actually ABI to change. So let's document it explicitly. Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230619190142.26498-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01docs: networking: Update codeaurora references for rmnetSubash Abhinov Kasiviswanathan
source.codeaurora.org is no longer accessible and so the reference link in the documentation is not useful. Use iproute2 instead as it has a rmnet module for configuration. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-01docs: netdev: broaden mailbot to all MAINTAINERSJakub Kicinski
Reword slightly now that all MAINTAINERS have access to the commands. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-01net: usb: cdc_ether: add u-blox 0x1313 composition.Davide Tronchin
Add CDC-ECM support for LARA-R6 01B. The new LARA-R6 product variant identified by the "01B" string can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial interface and 1 CDC-ECM virtual network interface The first 4 interfaces of all the 3 configurations (default, RmNet, ECM) are the same. In CDC-ECM mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-01Merge tag 'kvm-x86-vmx-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM VMX changes for 6.5: - Fix missing/incorrect #GP checks on ENCLS - Use standard mmu_notifier hooks for handling APIC access page - Misc cleanups
2023-07-01Merge tag 'kvm-x86-svm-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM SVM changes for 6.5: - Drop manual TR/TSS load after VM-Exit now that KVM uses VMLOAD for host state - Fix a not-yet-problematic missing call to trace_kvm_exit() for VM-Exits that are handled in the fastpath - Print more descriptive information about the status of SEV and SEV-ES during module load - Assert that misc_cg_set_capacity() doesn't fail to avoid should-be-impossible memory leaks
2023-07-01Merge tag 'kvm-x86-selftests-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM selftests changes for 6.5: - Add a test for splitting and reconstituting hugepages during and after dirty logging - Add support for CPU pinning in demand paging test - Generate dependency files so that partial rebuilds work as expected - Misc cleanups and fixes
2023-07-01Merge tag 'kvm-x86-pmu-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM x86/pmu changes for 6.5: - Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes included along the way
2023-07-01Merge tag 'kvm-x86-mmu-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM x86/mmu changes for 6.5: - Add back a comment about the subtle side effect of try_cmpxchg64() in tdp_mmu_set_spte_atomic() - Add an assertion in __kvm_mmu_invalidate_addr() to verify that the target KVM MMU is the current MMU - Add a "never" option to effectively avoid creating NX hugepage recovery threads
2023-07-01Merge tag 'kvm-x86-misc-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM x86 changes for 6.5: * Move handling of PAT out of MTRR code and dedup SVM+VMX code * Fix output of PIC poll command emulation when there's an interrupt * Add a maintainer's handbook to document KVM x86 processes, preferred coding style, testing expectations, etc. * Misc cleanups
2023-07-01Merge tag 'kvm-x86-generic-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
Common KVM changes for 6.5: - Fix unprotected vcpu->pid dereference via debugfs - Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals - Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code - Misc cleanups
2023-07-01Merge tag 'kvmarm-6.5' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 6.5 - Eager page splitting optimization for dirty logging, optionally allowing for a VM to avoid the cost of block splitting in the stage-2 fault path. - Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with services that live in the Secure world. pKVM intervenes on FF-A calls to guarantee the host doesn't misuse memory donated to the hyp or a pKVM guest. - Support for running the split hypervisor with VHE enabled, known as 'hVHE' mode. This is extremely useful for testing the split hypervisor on VHE-only systems, and paves the way for new use cases that depend on having two TTBRs available at EL2. - Generalized framework for configurable ID registers from userspace. KVM/arm64 currently prevents arbitrary CPU feature set configuration from userspace, but the intent is to relax this limitation and allow userspace to select a feature set consistent with the CPU. - Enable the use of Branch Target Identification (FEAT_BTI) in the hypervisor. - Use a separate set of pointer authentication keys for the hypervisor when running in protected mode, as the host is untrusted at runtime. - Ensure timer IRQs are consistently released in the init failure paths. - Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps (FEAT_EVT), as it is a register commonly read from userspace. - Erratum workaround for the upcoming AmpereOne part, which has broken hardware A/D state management. As a consequence of the hVHE series reworking the arm64 software features framework, the for-next/module-alloc branch from the arm64 tree comes along for the ride.
2023-07-01Merge tag 'kvm-riscv-6.5-1' of https://github.com/kvm-riscv/linux into HEADPaolo Bonzini
KVM/riscv changes for 6.5 - Redirect AMO load/store misaligned traps to KVM guest - Trap-n-emulate AIA in-kernel irqchip for KVM guest - Svnapot support for KVM Guest
2023-07-01Merge tag 'kvm-s390-next-6.5-1' of ↵Paolo Bonzini
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD * New uvdevice secret API * New CMM selftest * cmm fix * diag 9c racy access of target cpu fix
2023-07-01smb: client: remove redundant pointer 'server'Colin Ian King
The pointer 'server' is assigned but never read, the pointer is redundant and can be removed. Cleans up clang scan build warning: fs/smb/client/dfs.c:217:3: warning: Value stored to 'server' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-01cifs: fix session state transition to avoid use-after-free issueWinston Wen
We switch session state to SES_EXITING without cifs_tcp_ses_lock now, it may lead to potential use-after-free issue. Consider the following execution processes: Thread 1: __cifs_put_smb_ses() spin_lock(&cifs_tcp_ses_lock) if (--ses->ses_count > 0) spin_unlock(&cifs_tcp_ses_lock) return spin_unlock(&cifs_tcp_ses_lock) ---> **GAP** spin_lock(&ses->ses_lock) if (ses->ses_status == SES_GOOD) ses->ses_status = SES_EXITING spin_unlock(&ses->ses_lock) Thread 2: cifs_find_smb_ses() spin_lock(&cifs_tcp_ses_lock) list_for_each_entry(ses, ...) spin_lock(&ses->ses_lock) if (ses->ses_status == SES_EXITING) spin_unlock(&ses->ses_lock) continue ... spin_unlock(&ses->ses_lock) if (ret) cifs_smb_ses_inc_refcount(ret) spin_unlock(&cifs_tcp_ses_lock) If thread 1 is preempted in the gap and thread 2 start executing, thread 2 will get the session, and soon thread 1 will switch the session state to SES_EXITING and start releasing it, even though thread 1 had increased the session's refcount and still uses it. So switch session state under cifs_tcp_ses_lock to eliminate this gap. Signed-off-by: Winston Wen <wentao@uniontech.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-06-30Merge tag '6.5-rc-smb3-client-fixes-part1' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull smb client updates from Steve French: - Deferred close fix - Debugging improvements: display missing mount option, dump rc on invalidate inode failures, print client_guid in DebugData, log session id when matching session not found in reconnect, new dynamic tracepoint for session not found - Mount fixes including: potential null dereference, and possible memory leak and path name parsing when double slashes - Fix potential use after free in compounding - Two crediting (flow control) fixes: fix for crediting leak (stress scenario with excess lease credits) and better locking around updating credits - Three cleanups from issues pointed out by the kernel test robot - Session state check improvements (including for potential use after free) - DFS fixes: Fix for getattr on link when DFS disabled, fix for DFS mounts to same share with different prefix paths, DFS mount error checking improvement * tag '6.5-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: cifs: new dynamic tracepoint to track ses not found errors cifs: log session id when a matching ses is not found smb: client: improve DFS mount check smb: client: fix shared DFS root mounts with different prefixes smb: client: fix parsing of source mount option smb: client: fix broken file attrs with nodfs mounts cifs: print client_guid in DebugData cifs: fix session state check in smb2_find_smb_ses cifs: fix session state check in reconnect to avoid use-after-free issue cifs: do all necessary checks for credits within or before locking cifs: prevent use-after-free by freeing the cfile later smb: client: fix warning in generic_ip_connect() smb: client: fix warning in CIFSFindNext() smb: client: fix warning in CIFSFindFirst() smb3: do not reserve too many oplock credits cifs: print more detail when invalidate_inode_mapping fails smb: client: fix warning in cifs_smb3_do_mount() smb: client: fix warning in cifs_match_super() cifs: print nosharesock value while dumping mount options SMB3: Do not send lease break acknowledgment if all file handles have been closed
2023-06-30Merge tag '6.5-rc-ksmbd-server-fixes-part1' of git://git.samba.org/ksmbdLinus Torvalds
Pull ksmbd server updates from Steve French: - two fixes for compounding bugs (make sure no out of bound reads with less common combinations of commands in the compound) - eight minor cleanup patches (e.g. simplifying return values, replace one element array, use of kzalloc where simpler) - fix for clang warning on possible overflow in filename conversion * tag '6.5-rc-ksmbd-server-fixes-part1' of git://git.samba.org/ksmbd: ksmbd: avoid field overflow warning ksmbd: Replace one-element array with flexible-array member ksmbd: Use struct_size() helper in ksmbd_negotiate_smb_dialect() ksmbd: add missing compound request handing in some commands ksmbd: fix out of bounds read in smb2_sess_setup ksmbd: Replace the ternary conditional operator with min() ksmbd: use kvzalloc instead of kvmalloc ksmbd: Change the return value of ksmbd_vfs_query_maximal_access to void ksmbd: return a literal instead of 'err' in ksmbd_vfs_kern_path_locked() ksmbd: use kzalloc() instead of __GFP_ZERO ksmbd: remove unused ksmbd_tree_conn_share function
2023-06-30Merge tag 'nfsd-6.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix ordering of attributes in NFSv4 GETATTR replies * tag 'nfsd-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: Fix creation time serialization order
2023-06-30Merge tag 'livepatching-for-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching update from Petr Mladek: - Make a variable static to fix a sparse warning * tag 'livepatching-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Make 'klp_stack_entries' static
2023-06-30Merge tag 'efi-next-for-v6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "Although some more stuff is brewing, the EFI changes that are ready for mainline are few this cycle: - improve the PCI DMA paranoia logic in the EFI stub - some constification changes - add statfs support to efivarfs - allow user space to enumerate updatable firmware resources without CAP_SYS_ADMIN" * tag 'efi-next-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/libstub: Disable PCI DMA before grabbing the EFI memory map efi/esrt: Allow ESRT access without CAP_SYS_ADMIN efivarfs: expose used and total size efi: make kobj_type structure constant efi: x86: make kobj_type structure constant
2023-06-30Merge tag 'v6.5-p1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add linear akcipher/sig API - Add tfm cloning (hmac, cmac) - Add statesize to crypto_ahash Algorithms: - Allow only odd e and restrict value in FIPS mode for RSA - Replace LFSR with SHA3-256 in jitter - Add interface for gathering of raw entropy in jitter Drivers: - Fix race on data_avail and actual data in hwrng/virtio - Add hash and HMAC support in starfive - Add RSA algo support in starfive - Add support for PCI device 0x156E in ccp" * tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits) crypto: akcipher - Do not copy dst if it is NULL crypto: sig - Fix verify call crypto: akcipher - Set request tfm on sync path crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS hwrng: st - keep clock enabled while hwrng is registered hwrng: st - support compile-testing hwrng: imx-rngc - fix the timeout for init and self check KEYS: asymmetric: Use new crypto interface without scatterlists KEYS: asymmetric: Move sm2 code into x509_public_key KEYS: Add forward declaration in asymmetric-parser.h crypto: sig - Add interface for sign/verify crypto: akcipher - Add sync interface without SG lists crypto: cipher - On clone do crypto_mod_get() crypto: api - Add __crypto_alloc_tfmgfp crypto: api - Remove crypto_init_ops() crypto: rsa - allow only odd e and restrict value in FIPS mode crypto: geniv - Split geniv out of AEAD Kconfig option crypto: algboss - Add missing dependency on RNG2 crypto: starfive - Add RSA algo support ...
2023-06-30xtensa: fix NOMMU build with lock_mm_and_find_vma() conversionLinus Torvalds
It turns out that xtensa has a really odd configuration situation: you can do a no-MMU config, but still have the page fault code enabled. Which doesn't sound all that sensible, but it turns out that xtensa can have protection faults even without the MMU, and we have this: config PFAULT bool "Handle protection faults" if EXPERT && !MMU default y help Handle protection faults. MMU configurations must enable it. noMMU configurations may disable it if used memory map never generates protection faults or faults are always fatal. If unsure, say Y. which completely violated my expectations of the page fault handling. End result: Guenter reports that the xtensa no-MMU builds all fail with arch/xtensa/mm/fault.c: In function ‘do_page_fault’: arch/xtensa/mm/fault.c:133:8: error: implicit declaration of function ‘lock_mm_and_find_vma’ because I never exposed the new lock_mm_and_find_vma() function for the no-MMU case. Doing so is simple enough, and fixes the problem. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: a050ba1e7422 ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-30Merge tag 'md-fixes-20230630' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.5 Pull MD fix from Song: "This patch fixes data corruption caused by discard on raid0 array with original layout." * tag 'md-fixes-20230630' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid0: add discard support for the 'original' layout
2023-06-30f2fs: fix to do sanity check on direct node in truncate_dnode()Chao Yu
syzbot reports below bug: BUG: KASAN: slab-use-after-free in f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574 Read of size 4 at addr ffff88802a25c000 by task syz-executor148/5000 CPU: 1 PID: 5000 Comm: syz-executor148 Not tainted 6.4.0-rc7-syzkaller-00041-ge660abd551f1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351 print_report mm/kasan/report.c:462 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:572 f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574 truncate_dnode+0x229/0x2e0 fs/f2fs/node.c:944 f2fs_truncate_inode_blocks+0x64b/0xde0 fs/f2fs/node.c:1154 f2fs_do_truncate_blocks+0x4ac/0xf30 fs/f2fs/file.c:721 f2fs_truncate_blocks+0x7b/0x300 fs/f2fs/file.c:749 f2fs_truncate.part.0+0x4a5/0x630 fs/f2fs/file.c:799 f2fs_truncate include/linux/fs.h:825 [inline] f2fs_setattr+0x1738/0x2090 fs/f2fs/file.c:1006 notify_change+0xb2c/0x1180 fs/attr.c:483 do_truncate+0x143/0x200 fs/open.c:66 handle_truncate fs/namei.c:3295 [inline] do_open fs/namei.c:3640 [inline] path_openat+0x2083/0x2750 fs/namei.c:3791 do_filp_open+0x1ba/0x410 fs/namei.c:3818 do_sys_openat2+0x16d/0x4c0 fs/open.c:1356 do_sys_open fs/open.c:1372 [inline] __do_sys_creat fs/open.c:1448 [inline] __se_sys_creat fs/open.c:1442 [inline] __x64_sys_creat+0xcd/0x120 fs/open.c:1442 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is, inodeA references inodeB via inodeB's ino, once inodeA is truncated, it calls truncate_dnode() to truncate data blocks in inodeB's node page, it traverse mapping data from node->i.i_addr[0] to node->i.i_addr[ADDRS_PER_BLOCK() - 1], result in out-of-boundary access. This patch fixes to add sanity check on dnode page in truncate_dnode(), so that, it can help to avoid triggering such issue, and once it encounters such issue, it will record newly introduced ERROR_INVALID_NODE_REFERENCE error into superblock, later fsck can detect such issue and try repairing. Also, it removes f2fs_truncate_data_blocks() for cleanup due to the function has only one caller, and uses f2fs_truncate_data_blocks_range() instead. Reported-and-tested-by: syzbot+12cb4425b22169b52036@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000f3038a05fef867f8@google.com Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-06-30f2fs: only set release for file that has compressed dataSheng Yong
If a file is not comprssed yet or does not have compressed data, for example, its data has a very low compression ratio, do not set FI_COMPRESS_RELEASED flag. Signed-off-by: Sheng Yong <shengyong@oppo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-06-30f2fs: fix compile warning in f2fs_destroy_node_manager()Chao Yu
fs/f2fs/node.c: In function ‘f2fs_destroy_node_manager’: fs/f2fs/node.c:3390:1: warning: the frame size of 1048 bytes is larger than 1024 bytes [-Wframe-larger-than=] 3390 | } Merging below pointer arrays into common one, and reuse it by cast type. struct nat_entry *natvec[NATVEC_SIZE]; struct nat_entry_set *setvec[SETVEC_SIZE]; Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-06-30f2fs: fix error path handling in truncate_dnode()Chao Yu
If truncate_node() fails in truncate_dnode(), it missed to call f2fs_put_page(), fix it. Fixes: 7735730d39d7 ("f2fs: fix to propagate error from __get_meta_page()") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-06-30f2fs: fix deadlock in i_xattr_sem and inode page lockJaegeuk Kim
Thread #1: [122554.641906][ T92] f2fs_getxattr+0xd4/0x5fc -> waiting for f2fs_down_read(&F2FS_I(inode)->i_xattr_sem); [122554.641927][ T92] __f2fs_get_acl+0x50/0x284 [122554.641948][ T92] f2fs_init_acl+0x84/0x54c [122554.641969][ T92] f2fs_init_inode_metadata+0x460/0x5f0 [122554.641990][ T92] f2fs_add_inline_entry+0x11c/0x350 -> Locked dir->inode_page by f2fs_get_node_page() [122554.642009][ T92] f2fs_do_add_link+0x100/0x1e4 [122554.642025][ T92] f2fs_create+0xf4/0x22c [122554.642047][ T92] vfs_create+0x130/0x1f4 Thread #2: [123996.386358][ T92] __get_node_page+0x8c/0x504 -> waiting for dir->inode_page lock [123996.386383][ T92] read_all_xattrs+0x11c/0x1f4 [123996.386405][ T92] __f2fs_setxattr+0xcc/0x528 [123996.386424][ T92] f2fs_setxattr+0x158/0x1f4 -> f2fs_down_write(&F2FS_I(inode)->i_xattr_sem); [123996.386443][ T92] __f2fs_set_acl+0x328/0x430 [123996.386618][ T92] f2fs_set_acl+0x38/0x50 [123996.386642][ T92] posix_acl_chmod+0xc8/0x1c8 [123996.386669][ T92] f2fs_setattr+0x5e0/0x6bc [123996.386689][ T92] notify_change+0x4d8/0x580 [123996.386717][ T92] chmod_common+0xd8/0x184 [123996.386748][ T92] do_fchmodat+0x60/0x124 [123996.386766][ T92] __arm64_sys_fchmodat+0x28/0x3c Cc: <stable@vger.kernel.org> Fixes: 27161f13e3c3 "f2fs: avoid race in between read xattr & write xattr" Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-06-30sysctl: set variable sysctl_mount_point storage-class-specifier to staticTom Rix
smatch reports fs/proc/proc_sysctl.c:32:18: warning: symbol 'sysctl_mount_point' was not declared. Should it be static? This variable is only used in its defining file, so it should be static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-06-30md/raid0: add discard support for the 'original' layoutJason Baron
We've found that using raid0 with the 'original' layout and discard enabled with different disk sizes (such that at least two zones are created) can result in data corruption. This is due to the fact that the discard handling in 'raid0_handle_discard()' assumes the 'alternate' layout. We've seen this corruption using ext4 but other filesystems are likely susceptible as well. More specifically, while multiple zones are necessary to create the corruption, the corruption may not occur with multiple zones if they layout in such a way the layout matches what the 'alternate' layout would have produced. Thus, not all raid0 devices with the 'original' layout, different size disks and discard enabled will encounter this corruption. The 3.14 kernel inadvertently changed the raid0 disk layout for different size disks. Thus, running a pre-3.14 kernel and post-3.14 kernel on the same raid0 array could corrupt data. This lead to the creation of the 'original' layout (to match the pre-3.14 layout) and the 'alternate' layout (to match the post 3.14 layout) in the 5.4 kernel time frame and an option to tell the kernel which layout to use (since it couldn't be autodetected). However, when the 'original' layout was added back to 5.4 discard support for the 'original' layout was not added leading this issue. I've been able to reliably reproduce the corruption with the following test case: 1. create raid0 array with different size disks using original layout 2. mkfs 3. mount -o discard 4. create lots of files 5. remove 1/2 the files 6. fstrim -a (or just the mount point for the raid0 array) 7. umount 8. fsck -fn /dev/md0 (spews all sorts of corruptions) Let's fix this by adding proper discard support to the 'original' layout. The fix 'maps' the 'original' layout disks to the order in which they are read/written such that we can compare the disks in the same way that the current 'alternate' layout does. A 'disk_shift' field is added to 'struct strip_zone'. This could be computed on the fly in raid0_handle_discard() but by adding this field, we save some computation in the discard path. Note we could also potentially fix this by re-ordering the disks in the zones that follow the first one, and then always read/writing them using the 'alternate' layout. However, that is seen as a more substantial change, and we are attempting the least invasive fix at this time to remedy the corruption. I've verified the change using the reproducer mentioned above. Typically, the corruption is seen after less than 3 iterations, while the patch has run 500+ iterations. Cc: NeilBrown <neilb@suse.de> Cc: Song Liu <song@kernel.org> Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Cc: stable@vger.kernel.org Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230623180523.1901230-1-jbaron@akamai.com
2023-06-30mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0Nishanth Menon
Sec proxy/message manager data buffer is 60 bytes with the last of the registers indicating transmission completion. This however poses a bit of a challenge. The backing memory for sec_proxy / message manager is regular memory, and all sec proxy does is to trigger a burst of all 60 bytes of data over to the target thread backing ring accelerator. It doesn't do a memory scrub when it moves data out in the burst. When we transmit multiple messages, remnants of previous message is also transmitted which results in some random data being set in TISCI fields of messages that have been expanded forward. The entire concept of backward compatibility hinges on the fact that the unused message fields remain 0x0 allowing for 0x0 value to be specially considered when backward compatibility of message extension is done. So, instead of just writing the completion register, we continue to fill the message buffer up with 0x0 (note: for partial message involving completion, we already do this). This allows us to scale and introduce ABI changes back also work with other boot stages that may have left data in the internal memory. While at this, be consistent and explicit with the data_reg pointer increment. Fixes: aace66b170ce ("mailbox: Introduce TI message manager driver") Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-06-30mailbox: tegra: add support for Tegra264Stefan Kristiansson
Tegra264 has a slightly different doorbell register layout than previous chips. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stefan Kristiansson <stefank@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-06-30dt-bindings: mailbox: tegra: Document Tegra264 HSPPeter De Schrijver
Add the compatible string for the HSP block found on the Tegra264 SoC. The HSP block in Tegra264 is not register compatible with the one in Tegra194 or Tegra234 hence there is no fallback compatibility string. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-06-30dt-bindings: mailbox: convert bcm2835-mbox bindings to YAMLStefan Wahren
Convert the DT binding document for bcm2835-mbox from .txt to YAML. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-06-30dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatibleManikanta Mylavarapu
Add compatible for the Qualcomm IPQ5018 APCS block. Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-06-30Merge tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - Adjust log levels for common messages (Oleksandr Natalenko, Alex Williamson) - Support for dynamic MSI-X allocation (Reinette Chatre) - Enable and report PCIe AtomicOp Completer capabilities (Alex Williamson) - Cleanup Kconfigs for vfio bus drivers (Alex Williamson) - Add support for CDX bus based devices (Nipun Gupta) - Fix race with concurrent mdev initialization (Eric Farman) * tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio: vfio/mdev: Move the compat_class initialization to module init vfio/cdx: add support for CDX bus vfio/fsl: Create Kconfig sub-menu vfio/platform: Cleanup Kconfig vfio/pci: Cleanup Kconfig vfio/pci-core: Add capability for AtomicOp completer support vfio/pci: Also demote hiding standard cap messages vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X vfio/pci: Support dynamic MSI-X vfio/pci: Probe and store ability to support dynamic MSI-X vfio/pci: Use bitfield for struct vfio_pci_core_device flags vfio/pci: Update stale comment vfio/pci: Remove interrupt context counter vfio/pci: Use xarray for interrupt context storage vfio/pci: Move to single error path vfio/pci: Prepare for dynamic interrupt context storage vfio/pci: Remove negative check on unsigned vector vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable vfio/pci: demote hiding ecap messages to debug level
2023-06-30Merge tag 'pci-v6.5-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Export pcie_retrain_link() for use outside ASPM - Add Data Link Layer Link Active Reporting as another way for pcie_retrain_link() to determine the link is up - Work around link training failures (especially on the ASMedia ASM2824 switch) by training first at 2.5GT/s and then attempting higher rates Resource management: - When we coalesce host bridge windows, remove invalidated resources from the resource tree so future allocations work correctly Hotplug: - Cancel bringup sequence if card is not present, to keep from blinking Power Indicator indefinitely - Reassign bridge resources if necessary for ACPI hotplug Driver binding: - Convert platform_device .remove() callbacks to return void instead of a mostly useless int Power management: - Reduce wait time for secondary bus to be ready to speed up resume - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in D3cold - Call _REG when transitioning D-states so AML that uses the PCI config space OpRegion works, which fixes some ASMedia GPIO controllers after resume Virtualization: - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM hang when guest is rebooted - Add function 1 DMA alias quirk for Marvell 88SE9235 Error handling: - Unexport pci_save_aer_state() since it's only used in drivers/pci/ - Drop recommendation for drivers to configure AER Capability, since the PCI core does this for all devices ASPM: - Disable ASPM on MFD function removal to avoid use-after-free - Tighten up pci_enable_link_state() and pci_disable_link_state() interfaces so they don't enable/disable states the driver didn't specify - Avoid link retraining race that can happen if ASPM sets link control parameters while the link is in the midst of training for some other reason Endpoint framework: - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different from "PCI Endpoint NTB driver" - Automatically create a function specific attributes group for endpoint drivers to avoid reference counting issues - Fix many EPC test issues - Return pci_epf_type_add_cfs() error if EPF has no driver - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI vector parameters - Pass EPF device ID to driver probe functions - Return -EALREADY if EPC has already been started/stopped - Add linkdown notifier support and use it in qcom-ep - Add Bus Master Enable event support and use it in qcom-ep - Add Qualcomm Modem Host Interface (MHI) endpoint driver - Add Layerscape PME interrupt handling to manage link-up notification Cadence PCIe controller driver: - Wait for link retrain to complete when working around the J721E i2085 erratum with Gen2 mode Faraday FTPC100 PCI controller driver: - Release clock resources on error paths Freescale i.MX6 PCIe controller driver: - Save and restore Root Port MSI control to work around hardware defect Intel VMD host bridge driver: - Reset VMD config register between soft reboots - Capture pci_reset_bus() return value instead of printing junk when it fails Qualcomm PCIe controller driver: - Add SDX65 endpoint compatible string to DT binding - Disable register write access after init for IP v2.3.3, v2.9.0 - Use DWC helpers for enabling/disabling writes to DBI registers - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2, v2.3.3, v2.7.0, v2.9.0 - Reuse v2.3.2 post-init sequence for v2.4.0 Renesas R-Car PCIe controller driver: - Remove unused static pcie_base and pcie_dev Rockchip PCIe controller driver: - Remove writes to unused registers - Write endpoint Device ID using correct register - Assert PCI Configuration Enable bit after probe so endpoint responds instead of generating Request Retry Status messages - Poll waiting for PHY PLLs to lock - Update RK3399 example DT binding to be valid - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of manually generating PCIe message - Use multiple windows to avoid address translation conflicts - Use u32 (not u16) when accessing 32-bit registers - Hide MSI-X Capability, since RK3399 can't generate MSI-X - Set endpoint controller required alignment to 256 Synopsys DesignWare PCIe controller driver: - Wait for link to come up only if we've initiated link training Miscellaneous: - Add pci_clear_master() stub for non-CONFIG_PCI" * tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits) Documentation: PCI: correct spelling PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain() PCI: xgene-msi: Convert to platform remove callback returning void PCI: tegra: Convert to platform remove callback returning void PCI: rockchip-host: Convert to platform remove callback returning void PCI: mvebu: Convert to platform remove callback returning void PCI: mt7621: Convert to platform remove callback returning void PCI: mediatek-gen3: Convert to platform remove callback returning void PCI: mediatek: Convert to platform remove callback returning void PCI: iproc: Convert to platform remove callback returning void PCI: hisi-error: Convert to platform remove callback returning void PCI: dwc: Convert to platform remove callback returning void PCI: j721e: Convert to platform remove callback returning void PCI: brcmstb: Convert to platform remove callback returning void PCI: altera-msi: Convert to platform remove callback returning void PCI: altera: Convert to platform remove callback returning void PCI: aardvark: Convert to platform remove callback returning void PCI: rcar: Use correct product family name for Renesas R-Car PCI: layerscape: Add the endpoint linkup notifier support PCI: endpoint: pci-epf-vntb: Fix typo in comments ...
2023-06-30Merge tag 'pinctrl-v6.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time New drivers: - Tegra234 support - Qualcomm IPQ5018 support - Intel Meteor Lake-S support - Qualcomm SDX75 subdriver - Qualcomm SPMI-based PM8953 support Improvements: - Fix up support for GPIO3 on the AXP209 - Push-pull drive configuration support for the AT91 PIO4 - Fix misc non-urgent bugs in the AMD driver - Misc non-urgent improved error handling - Misc janitorial and minor improvements" * tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits) pinctrl: cherryview: Drop goto label pinctrl: baytrail: invert if condition pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook pinctrl: tegra: avoid duplicate field initializers dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function pinctrl: mlxbf3: remove broken Kconfig 'select' pinctrl: spear: Remove unused of_gpio.h inclusion pinctrl: lantiq: Remove unused of_gpio.h inclusion pinctrl: at91-pio4: check return value of devm_kasprintf() pinctrl: microchip-sgpio: check return value of devm_kasprintf() pinctrl: freescale: Fix a memory out of bounds when num_configs is 1 pinctrl: intel: refine ->irq_set_type() hook pinctrl: intel: refine ->set_mux() hook pinctrl: baytrail: Use str_hi_lo() helper lib/string_choices: Add str_high_low() helper lib/string_helpers: Split out string_choices.h lib/string_helpers: Add missing header files to MAINTAINERS database pinctrl: npcm7xx: Add missing check for ioremap pinctrl:sunplus: Add check for kmalloc ...
2023-06-30Merge tag 'platform-drivers-x86-v6.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "AMD PMC and PMF drivers: - Various bugfixes - Improved debugging support Intel PMC: - Refactor to support hw with multiple PMCs - Various other improvements / new hw support Intel Speed Select Technology (ISST): - TPMI Uncore Frequency + Cluster Level Power Controls - Various bugfixes - tools/intel-speed-select: Misc improvements Dell-DDV: Add documentation INT3472 ACPI camera sensor glue code: - Evaluate device's _DSM method to control imaging clock - Drop the need to have a table with per sensor-model info Lenovo Yogabook: - Refactor / rework to also support Android models Think-LMI: - Multiple improvements and fixes WMI: - Add proper API documentation for the WMI bus x86-android-tablets: - Misc new hw support Miscellaneous other cleanups / fixes" * tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (91 commits) platform/x86:intel/pmc: Add Meteor Lake IOE-M PMC related maps platform/x86:intel/pmc: Add Meteor Lake IOE-P PMC related maps platform/x86:intel/pmc: Use SSRAM to discover pwrm base address of primary PMC platform/x86:intel/pmc: Discover PMC devices platform/x86:intel/pmc: Enable debugfs multiple PMC support platform/x86:intel/pmc: Add support to handle multiple PMCs platform/x86:intel/pmc: Combine core_init() and core_configure() platform/x86:intel/pmc: Update maps for Meteor Lake P/M platforms platform/x86/intel: tpmi: Remove hardcoded unit and offset platform/x86: int3472: discrete: Log a warning if the pin-numbers don't match platform/x86: int3472: discrete: Use FIELD_GET() on the GPIO _DSM return value platform/x86: int3472: discrete: Add alternative "AVDD" regulator supply name platform/x86: int3472: discrete: Add support for 1 GPIO regulator shared between 2 sensors platform/x86: int3472: discrete: Remove sensor_config-s platform/x86: int3472: discrete: Drop GPIO remapping support platform/x86: apple-gmux: don't use be32_to_cpu and cpu_to_be32 platform/x86/dell/dell-rbtn: Fix resources leaking on error path platform/x86: ISST: Fix usage counter platform/x86: ISST: Reset default callback on unregister platform/x86: int3472: Switch back to use struct i2c_driver's .probe() ...
2023-06-30Merge tag 'nvme-6.5-2023-06-30' of git://git.infradead.org/nvme into block-6.5Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.5 - Reduce spamming kernel logs on repeated controller updates (Breno) - Improved struct packing (Christophe JAILLET) - Misspelled command name in error logging (Damien) - Failover fix for temporary frozen queue (Sagi) - Reset error handling fixes (Keith)" * tag 'nvme-6.5-2023-06-30' of git://git.infradead.org/nvme: nvme: disable controller on reset state failure nvme: sync timeout work on failed reset nvme: ensure unquiesce on teardown nvme-mpath: fix I/O failure with EAGAIN when failing over I/O nvme: host: fix command name spelling nvmet: Reorder fields in 'struct nvmet_ns' nvme: Print capabilities changes just once
2023-06-30Merge tag 'for-6.5/dm-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Update DM crypt to allocate compound pages if possible - Fix DM crypt target's crypt_ctr_cipher_new return value on invalid AEAD cipher - Fix DM flakey testing target's write bio corruption feature to corrupt the data of a cloned bio instead of the original - Add random_read_corrupt and random_write_corrupt features to DM flakey target - Fix ABBA deadlock in DM thin metadata by resetting associated bufio client rather than destroying and recreating it - A couple other small DM thinp cleanups - Update DM core to support disabling block core IO stats accounting and optimize away code that isn't needed if stats are disabled - Other small DM core cleanups - Improve DM integrity target to not require so much memory on 32 bit systems. Also only allocate the recalculate buffer as needed (and increasingly reduce its size on allocation failure) - Update DM integrity to use %*ph for printing hexdump of a small buffer. Also update DM integrity documentation - Various DM core ioctl interface hardening. Now more careful about alignment of structures and processing of input passed to the kernel from userspace. Also disallow the creation of DM devices named "control", "." or ".." - Eliminate GFP_NOIO workarounds for __vmalloc and kvmalloc in DM core's ioctl and bufio code * tag 'for-6.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits) dm: get rid of GFP_NOIO workarounds for __vmalloc and kvmalloc dm integrity: scale down the recalculate buffer if memory allocation fails dm integrity: only allocate recalculate buffer when needed dm integrity: reduce vmalloc space footprint on 32-bit architectures dm ioctl: Refuse to create device named "." or ".." dm ioctl: Refuse to create device named "control" dm ioctl: Avoid double-fetch of version dm ioctl: structs and parameter strings must not overlap dm ioctl: Avoid pointer arithmetic overflow dm ioctl: Check dm_target_spec is sufficiently aligned Documentation: dm-integrity: Document an example of how the tunables relate. Documentation: dm-integrity: Document default values. Documentation: dm-integrity: Document the meaning of "buffer". Documentation: dm-integrity: Fix minor grammatical error. dm integrity: Use %*ph for printing hexdump of a small buffer dm thin: disable discards for thin-pool if no_discard_passdown dm: remove stale/redundant dm_internal_{suspend,resume} prototypes in dm.h dm: skip dm-stats work in alloc_io() unless needed dm: avoid needless dm_io access if all IO accounting is disabled dm: support turning off block-core's io stats accounting ...
2023-06-30Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi, lpfc, qla2xxx). We have a couple of major core changes impacting other systems: - Command Duration Limits, which spills into block and ATA - block level Persistent Reservation Operations, which touches block, nvme, target and dm Both of these are added with merge commits containing a cover letter explaining what's going on" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits) scsi: core: Improve warning message in scsi_device_block() scsi: core: Replace scsi_target_block() with scsi_block_targets() scsi: core: Don't wait for quiesce in scsi_device_block() scsi: core: Don't wait for quiesce in scsi_stop_queue() scsi: core: Merge scsi_internal_device_block() and device_block() scsi: sg: Increase number of devices scsi: bsg: Increase number of devices scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue scsi: ufs: ufs-pci: Add support for Intel Arrow Lake scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT scsi: ufs: wb: Add explicit flush_threshold sysfs attribute scsi: ufs: ufs-qcom: Switch to the new ICE API scsi: ufs: dt-bindings: qcom: Add ICE phandle scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR scsi: ufs: core: Remove dedicated hwq for dev command scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 03:12:29 +0000