summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-23opp: Reinitialize the list_kref before adding the static OPPs againViresh Kumar
The list_kref reaches a count of 0 when all the static OPPs are removed, for example when dev_pm_opp_of_cpumask_remove_table() is called, though the actual OPP table may not get freed as it may still be referenced by other parts of the kernel, like from a call to dev_pm_opp_set_supported_hw(). And if we call dev_pm_opp_of_cpumask_add_table() again at this point, we must reinitialize the list_kref otherwise the kernel will hit a WARN() in kref infrastructure for incrementing a kref with value 0. Fixes: 11e1a1648298 ("opp: Don't decrement uninitialized list_kref") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-10-23ALSA: hda: Add Tigerlake/Jasperlake PCI IDPan Xiuli
Add HD Audio Device PCI ID for the Intel Tigerlake and Jasperlake platform. Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022194402.23178-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-22IB/core: Do not notify GID change event of an unregistered deviceParav Pandit
When IB device is undergoing unregistration, the GID cache is always cleaned up after all clients are unregistered with the below flow. __ib_unregister_device() disable_device() ib_cache_cleanup_one() gid_table_cleanup_one() cleanup_gid_table_port() There is no use in generating a GID change event at this stage, where there is no active client of the device and device is nearly unregistered. Link: https://lore.kernel.org/r/20191020065427.8772-4-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22IB/mlx5: Align usage of QP1 create flags with rest of mlx5 definesMichael Guralnik
There is little value in keeping separate function for one flag, provide it directly like any other mlx5 define. Link: https://lore.kernel.org/r/20191020064400.8344-2-leon@kernel.org Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22IB/mlx5: Remove dead codeRan Rozenstein
mlx5_ib_dc_atomic_is_supported function is not used anywhere. Remove the dead code. Fixes: a60109dc9a95 ("IB/mlx5: Add support for extended atomic operations") Link: https://lore.kernel.org/r/20191020064454.8551-1-leon@kernel.org Signed-off-by: Ran Rozenstein <ranro@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22RDMA/uverbs: Add a check for uverbs_attr_get to uverbs_copy_to_struct_or_zeroChuhong Yuan
All current callers for uverbs_copy_to_struct_or_zero() already check that the attribute exists, but it make sense to verify the result like the other functions do. Link: https://lore.kernel.org/r/20191018081533.8544-1-hslester96@gmail.com Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22IB/cma: Honor traffic class from lower netdevice for RoCEParav Pandit
When a macvlan netdevice is used for RoCE, consider the tos->prio->tc mapping as SL using its lower netdevice. 1. If the lower netdevice is a VLAN netdevice, consider the VLAN netdevice and it's parent netdevice for mapping 2. If the lower netdevice is not a VLAN netdevice, consider tc mapping directly from the lower netdevice Link: https://lore.kernel.org/r/20191015072058.17347-1-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22RDMA/nldev: Provide MR statisticsErez Alfasi
Add RDMA nldev netlink interface for dumping MR statistics information. Output example: $ ./ibv_rc_pingpong -o -P -s 500000000 local address: LID 0x0001, QPN 0x00008a, PSN 0xf81096, GID :: $ rdma stat show mr dev mlx5_0 mrn 2 page_faults 122071 page_invalidations 0 Link: https://lore.kernel.org/r/20191016062308.11886-5-leon@kernel.org Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22RDMA/mlx5: Return ODP type per MRErez Alfasi
Provide an ODP explicit/implicit type as part of 'rdma -dd resource show mr' dump. For example: $ rdma -dd resource show mr dev mlx5_0 mrn 1 rkey 0xa99a lkey 0xa99a mrlen 50000000 pdn 9 pid 7372 comm ibv_rc_pingpong drv_odp explicit For non-ODP MRs, we won't print "drv_odp ..." at all. Link: https://lore.kernel.org/r/20191016062308.11886-4-leon@kernel.org Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22RDMA/nldev: Allow different fill function per resourceErez Alfasi
So far res_get_common_{dumpit, doit} was using the default resource fill function which was defined as part of the nldev_fill_res_entry fill_entries. Add a fill function pointer as an argument allows us to use different fill function in case we want to dump different values then 'rdma resource' flow do, but still use the same existing general resources dumping flow. Link: https://lore.kernel.org/r/20191016062308.11886-3-leon@kernel.org Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22IB/mlx5: Introduce ODP diagnostic countersErez Alfasi
Introduce ODP diagnostic counters and count the following per MR within IB/mlx5 driver: 1) Page faults: Total number of faulted pages. 2) Page invalidations: Total number of pages invalidated by the OS during all invalidation events. The translations can be no longer valid due to either non-present pages or mapping changes. Link: https://lore.kernel.org/r/20191016062308.11886-2-leon@kernel.org Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: add a Documentation driver-api chapter for Infinibandrd.dunlab@gmail.com
Add a driver-api chapter for InfiniBand interfaces. Link: https://lore.kernel.org/r/20191010035240.310347906@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix sw/rdmavt/ kernel-doc notationrd.dunlab@gmail.com
Add kernel-doc for missing function parameters. Remove excess kernel-doc descriptions. Fix expected kernel-doc formatting (use ':' instead of '-' after @funcarg). ../drivers/infiniband/sw/rdmavt/ah.c:138: warning: Excess function parameter 'udata' description in 'rvt_destroy_ah' ../drivers/infiniband/sw/rdmavt/vt.c:698: warning: Function parameter or member 'pkey_table' not described in 'rvt_init_port' ../drivers/infiniband/sw/rdmavt/cq.c:561: warning: Excess function parameter 'rdi' description in 'rvt_driver_cq_init' ../drivers/infiniband/sw/rdmavt/cq.c:575: warning: Excess function parameter 'rdi' description in 'rvt_cq_exit' ../drivers/infiniband/sw/rdmavt/qp.c:2573: warning: Function parameter or member 'qp' not described in 'rvt_add_rnr_timer' ../drivers/infiniband/sw/rdmavt/qp.c:2573: warning: Function parameter or member 'aeth' not described in 'rvt_add_rnr_timer' ../drivers/infiniband/sw/rdmavt/qp.c:2591: warning: Function parameter or member 'qp' not described in 'rvt_stop_rc_timers' ../drivers/infiniband/sw/rdmavt/qp.c:2624: warning: Function parameter or member 'qp' not described in 'rvt_del_timers_sync' ../drivers/infiniband/sw/rdmavt/qp.c:2697: warning: Function parameter or member 'cb' not described in 'rvt_qp_iter_init' ../drivers/infiniband/sw/rdmavt/qp.c:2728: warning: Function parameter or member 'iter' not described in 'rvt_qp_iter_next' ../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'rdi' not described in 'rvt_qp_iter' ../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'v' not described in 'rvt_qp_iter' ../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'cb' not described in 'rvt_qp_iter' Link: https://lore.kernel.org/r/20191010035240.251184229@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix core/ kernel-doc notationrd.dunlab@gmail.com
Correct function parameter names (typos or renames). Add kernel-doc notation for missing function parameters. ../drivers/infiniband/core/sa_query.c:1263: warning: Function parameter or member 'gid_attr' not described in 'ib_init_ah_attr_from_path' ../drivers/infiniband/core/sa_query.c:1263: warning: Excess function parameter 'sgid_attr' description in 'ib_init_ah_attr_from_path' ../drivers/infiniband/core/device.c:145: warning: Function parameter or member 'dev' not described in 'rdma_dev_access_netns' ../drivers/infiniband/core/device.c:145: warning: Excess function parameter 'device' description in 'rdma_dev_access_netns' ../drivers/infiniband/core/device.c:1333: warning: Function parameter or member 'name' not described in 'ib_register_device' ../drivers/infiniband/core/device.c:1461: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device' ../drivers/infiniband/core/device.c:1461: warning: Excess function parameter 'device' description in 'ib_unregister_device' ../drivers/infiniband/core/device.c:1483: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_and_put' ../drivers/infiniband/core/device.c:1550: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_queued' Link: https://lore.kernel.org/r/20191010035240.191542461@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/iser/iser_initiator.c kernel-doc warningsrd.dunlab@gmail.com
Add kernel-doc notation for missing function parameters: ../drivers/infiniband/ulp/iser/iser_initiator.c:365: warning: Function parameter or member 'conn' not described in 'iser_send_command' ../drivers/infiniband/ulp/iser/iser_initiator.c:365: warning: Function parameter or member 'task' not described in 'iser_send_command' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'conn' not described in 'iser_send_data_out' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'task' not described in 'iser_send_data_out' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'hdr' not described in 'iser_send_data_out' Link: https://lore.kernel.org/r/20191010035240.132033937@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/iser/iser_verbs.c kernel-doc notationrd.dunlab@gmail.com
Various kernel-doc fixes: - fix typos - don't use /** for internal structs or functions - fix Return: kernel-doc formatting - add kernel-doc notation for missing function parameters ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'ib_conn' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'cmds_max' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'size' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:221: warning: Function parameter or member 'ib_conn' not described in 'iser_free_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'ib_conn' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'cmds_max' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'size' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:338: warning: Function parameter or member 'ib_conn' not described in 'iser_free_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:568: warning: Function parameter or member 'iser_conn' not described in 'iser_conn_release' ../drivers/infiniband/ulp/iser/iser_verbs.c:603: warning: Function parameter or member 'iser_conn' not described in 'iser_conn_terminate' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'signal' not described in 'iser_post_send' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'ib_conn' not described in 'iser_post_send' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'tx_desc' not described in 'iser_post_send' Link: https://lore.kernel.org/r/20191010035240.070520193@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix core/verbs.c kernel-doc notationrd.dunlab@gmail.com
Add missing function parameter descriptions: ../drivers/infiniband/core/verbs.c:257: warning: Function parameter or member 'flags' not described in '__ib_alloc_pd' ../drivers/infiniband/core/verbs.c:257: warning: Function parameter or member 'caller' not described in '__ib_alloc_pd' Link: https://lore.kernel.org/r/20191010035240.011497492@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/srpt/ib_srpt.h kernel-doc notationrd.dunlab@gmail.com
Fix kernel-doc warnings (typos or renames) in ib_srpt.h: ../drivers/infiniband/ulp/srpt/ib_srpt.h:419: warning: Function parameter or member 'port_guid_id' not described in 'srpt_port' ../drivers/infiniband/ulp/srpt/ib_srpt.h:419: warning: Function parameter or member 'port_gid_id' not described in 'srpt_port' Link: https://lore.kernel.org/r/20191010035239.950150496@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/opa_vnic/opa_vnic_internal.h kernel-doc notationrd.dunlab@gmail.com
Remove kernel-doc notation on 4 structs since they are internal and none of the struct fields/members are described. This removes 45 kernel-doc warnings. Link: https://lore.kernel.org/r/20191010035239.818405496@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/iser/iscsi_iser.h kernel-doc warningsrd.dunlab@gmail.com
Fix kernel-doc warnings and typos/spellos. ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'dma_addr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'cqe' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'reg_wr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'send_wr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'inv_wr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:277: warning: Function parameter or member 'cqe' not described in 'iser_rx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:296: warning: Function parameter or member 'rsp' not described in 'iser_login_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:339: warning: Function parameter or member 'reg_mem' not described in 'iser_reg_ops' ../drivers/infiniband/ulp/iser/iscsi_iser.h:399: warning: Function parameter or member 'all_list' not described in 'iser_fr_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:413: warning: Function parameter or member 'all_list' not described in 'iser_fr_pool' ../drivers/infiniband/ulp/iser/iscsi_iser.h:439: warning: Function parameter or member 'reg_cqe' not described in 'ib_conn' ../drivers/infiniband/ulp/iser/iscsi_iser.h:491: warning: Function parameter or member 'snd_w_inv' not described in 'iser_conn' This leaves 2 "member not described" warnings that I don't know how to fix: ../drivers/infiniband/ulp/iser/iscsi_iser.h:401: warning: Function parameter or member 'all_list' not described in 'iser_fr_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:415: warning: Function parameter or member 'all_list' not described in 'iser_fr_pool' Link: https://lore.kernel.org/r/20191010035239.756365352@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix core/ipwm_util.h kernel-doc warningsrd.dunlab@gmail.com
Fix kernel-doc warnings and expected formatting. ../drivers/infiniband/core/iwpm_util.h:219: warning: Function parameter or member 'a_sockaddr' not described in 'iwpm_compare_sockaddr' ../drivers/infiniband/core/iwpm_util.h:219: warning: Function parameter or member 'b_sockaddr' not described in 'iwpm_compare_sockaddr' ../drivers/infiniband/core/iwpm_util.h:280: warning: Function parameter or member 'iwpm_pid' not described in 'iwpm_send_hello' Link: https://lore.kernel.org/r/20191010035239.695604406@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/iser/iscsi_iser.[hc] kernel-doc notationrd.dunlab@gmail.com
Fix struct name in kernel-doc notation to match the struct name below it. Fix one typo (spello). Fix formatting as expected for kernel-doc notation. Fix parameter name to match the function's parameter name to eliminate a kernel-doc warning. ../drivers/infiniband/ulp/iser/iscsi_iser.c:815: warning: Function parameter or member 'non_blocking' not described in 'iscsi_iser_ep_connect' Link: https://lore.kernel.org/r/20191010035239.623888112@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22Merge branch 'mlx5-rd-sgl' into rdma.git for-nextJason Gunthorpe
From Yamin Friedman: ==================== This series from Yamin implements long standing "TODO" existed in rw.c. It allows the driver to specify a cut-over point where it is faster to build a lkey MR rather than do a large SGL for RDMA READ operations. mlx5 HW gets a notable performane boost by switching to MRs. ==================== Based on the mlx5-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for dependencies * branch 'mlx5-rd-sgl': (3 commits) RDMA/mlx5: Add capability for max sge to get optimized performance RDMA/rw: Support threshold for registration vs scattering to local pages net/mlx5: Expose optimal performance scatter entries capability
2019-10-22RDMA/mlx5: Add capability for max sge to get optimized performanceYamin Friedman
Allows the IB device to provide a value of maximum scatter gather entries per RDMA READ. In certain cases it may be preferable for a device to perform UMR memory registration rather than have many scatter entries in a single RDMA READ. This provides a significant performance increase in devices capable of using different memory registration schemes based on the number of scatter gather entries. This general capability allows each device vendor to fine tune when it is better to use memory registration. Link: https://lore.kernel.org/r/20191007135933.12483-4-leon@kernel.org Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22RDMA/rw: Support threshold for registration vs scattering to local pagesYamin Friedman
If there are more scatter entries than the recommended limit provided by the ib device, UMR registration is used. This will provide optimal performance when performing large RDMA READs over devices that advertise the threshold capability. With ConnectX-5 running NVMeoF RDMA with FIO single QP 128KB writes: Without use of cap: 70Gb/sec With use of cap: 84Gb/sec Link: https://lore.kernel.org/r/20191007135933.12483-3-leon@kernel.org Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22KVM: nVMX: Don't leak L1 MMIO regions to L2Jim Mattson
If the "virtualize APIC accesses" VM-execution control is set in the VMCS, the APIC virtualization hardware is triggered when a page walk in VMX non-root mode terminates at a PTE wherein the address of the 4k page frame matches the APIC-access address specified in the VMCS. On hardware, the APIC-access address may be any valid 4k-aligned physical address. KVM's nVMX implementation enforces the additional constraint that the APIC-access address specified in the vmcs12 must be backed by a "struct page" in L1. If not, L0 will simply clear the "virtualize APIC accesses" VM-execution control in the vmcs02. The problem with this approach is that the L1 guest has arranged the vmcs12 EPT tables--or shadow page tables, if the "enable EPT" VM-execution control is clear in the vmcs12--so that the L2 guest physical address(es)--or L2 guest linear address(es)--that reference the L2 APIC map to the APIC-access address specified in the vmcs12. Without the "virtualize APIC accesses" VM-execution control in the vmcs02, the APIC accesses in the L2 guest will directly access the APIC-access page in L1. When there is no mapping whatsoever for the APIC-access address in L1, the L2 VM just loses the intended APIC virtualization. However, when the APIC-access address is mapped to an MMIO region in L1, the L2 guest gets direct access to the L1 MMIO device. For example, if the APIC-access address specified in the vmcs12 is 0xfee00000, then L2 gets direct access to L1's APIC. Since this vmcs12 configuration is something that KVM cannot faithfully emulate, the appropriate response is to exit to userspace with KVM_INTERNAL_ERROR_EMULATION. Fixes: fe3ef05c7572 ("KVM: nVMX: Prepare vmcs02 from vmcs01 and vmcs12") Reported-by: Dan Cross <dcross@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22KVM: SVM: Fix potential wrong physical id in avic_handle_ldr_updateMiaohe Lin
Guest physical APIC ID may not equal to vcpu->vcpu_id in some case. We may set the wrong physical id in avic_handle_ldr_update as we always use vcpu->vcpu_id. Get physical APIC ID from vAPIC page instead. Export and use kvm_xapic_id here and in avic_handle_apic_id_update as suggested by Vitaly. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22RDMA/siw: Fix SQ/RQ drain logicBernard Metzler
Storage ULPs (e.g. iSER & NVMeOF) use ib_drain_qp() to drain QP/CQ. Current SIW's own drain routines do not properly wait until all SQ/RQ elements are completed and reaped from the CQ. This may cause touch after free issues. New logic relies on generic __ib_drain_sq()/__ib_drain_rq() posting a final work request, which SIW immediately flushes to CQ. Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Link: https://lore.kernel.org/r/20191004125356.20673-1-bmt@zurich.ibm.com Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22Merge branch 'misc' into fixesRussell King
2019-10-22cpufreq: Cancel policy update work scheduled before freeingSudeep Holla
Scheduled policy update work may end up racing with the freeing of the policy and unregistering the driver. One possible race is as below, where the cpufreq_driver is unregistered, but the scheduled work gets executed at later stage when, cpufreq_driver is NULL (i.e. after freeing the policy and driver). Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = (ptrval) [0000001c] *pgd=80000080204003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP THUMB2 Modules linked in: CPU: 0 PID: 34 Comm: kworker/0:1 Not tainted 5.4.0-rc3-00006-g67f5a8081a4b #86 Hardware name: ARM-Versatile Express Workqueue: events handle_update PC is at cpufreq_set_policy+0x58/0x228 LR is at dev_pm_qos_read_value+0x77/0xac Control: 70c5387d Table: 80203000 DAC: fffffffd Process kworker/0:1 (pid: 34, stack limit = 0x(ptrval)) (cpufreq_set_policy) from (refresh_frequency_limits.part.24+0x37/0x48) (refresh_frequency_limits.part.24) from (handle_update+0x2f/0x38) (handle_update) from (process_one_work+0x16d/0x3cc) (process_one_work) from (worker_thread+0xff/0x414) (worker_thread) from (kthread+0xff/0x100) (kthread) from (ret_from_fork+0x11/0x28) Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [ rjw: Cancel the work before dropping the QoS requests ] Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-22s390/kaslr: add support for R_390_GLOB_DAT relocation typeGerald Schaefer
Commit "bpf: Process in-kernel BTF" in linux-next introduced an undefined __weak symbol, which results in an R_390_GLOB_DAT relocation type. That is not yet handled by the KASLR relocation code, and the kernel stops with the message "Unknown relocation type". Add code to detect and handle R_390_GLOB_DAT relocation types and undefined symbols. Fixes: 805bc0bc238f ("s390/kernel: build a relocatable kernel") Cc: <stable@vger.kernel.org> # v5.2+ Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-22s390/zcrypt: fix memleak at releaseJohan Hovold
If a process is interrupted while accessing the crypto device and the global ap_perms_mutex is contented, release() could return early and fail to free related resources. Fixes: 00fab2350e6b ("s390/zcrypt: multiple zcrypt device nodes support") Cc: <stable@vger.kernel.org> # 4.19 Cc: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-22ALSA: usb-audio: Fix copy&paste error in the validatorTakashi Iwai
The recently introduced USB-audio descriptor validator had a stupid copy&paste error that may lead to an unexpected overlook of too short descriptors for processing and extension units. It's likely the cause of the report triggered by syzkaller fuzzer. Let's fix it. Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units") Reported-by: syzbot+0620f79a1978b1133fd7@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/s5hsgnkdbsl.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-22perf/aux: Fix AUX output stoppingAlexander Shishkin
Commit: 8a58ddae2379 ("perf/core: Fix exclusive events' grouping") allows CAP_EXCLUSIVE events to be grouped with other events. Since all of those also happen to be AUX events (which is not the case the other way around, because arch/s390), this changes the rules for stopping the output: the AUX event may not be on its PMU's context any more, if it's grouped with a HW event, in which case it will be on that HW event's context instead. If that's the case, munmap() of the AUX buffer can't find and stop the AUX event, potentially leaving the last reference with the atomic context, which will then end up freeing the AUX buffer. This will then trip warnings: Fix this by using the context's PMU context when looking for events to stop, instead of the event's PMU context. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20191022073940.61814-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-22Merge tag 'kvm-ppc-fixes-5.4-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD PPC KVM fix for 5.4 - Fix a bug in the XIVE code which can cause a host crash.
2019-10-22Merge tag 'kvmarm-fixes-5.4-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #2 Special PMU edition: - Fix cycle counter truncation - Fix cycle counter overflow limit on pure 64bit system - Allow chained events to be actually functional - Correct sample period after overflow
2019-10-22kvm: clear kvmclock MSR on resetPaolo Bonzini
After resetting the vCPU, the kvmclock MSR keeps the previous value but it is not enabled. This can be confusing, so fix it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22KVM: x86: fix bugon.cocci warningskbuild test robot
Use BUG_ON instead of a if condition followed by BUG. Generated by: scripts/coccinelle/misc/bugon.cocci Fixes: 4b526de50e39 ("KVM: x86: Check kvm_rebooting in kvm_spurious_fault()") CC: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22KVM: VMX: Remove specialized handling of unexpected exit-reasonsLiran Alon
Commit bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit") introduced specialized handling of specific exit-reasons that should not be raised by CPU because KVM configures VMCS such that they should never be raised. However, since commit 7396d337cfad ("KVM: x86: Return to userspace with internal error on unexpected exit reason"), VMX & SVM exit handlers were modified to generically handle all unexpected exit-reasons by returning to userspace with internal error. Therefore, there is no need for specialized handling of specific unexpected exit-reasons (This specialized handling also introduced inconsistency for these exit-reasons to silently skip guest instruction instead of return to userspace on internal-error). Fixes: bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit") Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: fix sync_regs_test with newer gccsVitaly Kuznetsov
Commit 204c91eff798a ("KVM: selftests: do not blindly clobber registers in guest asm") was intended to make test more gcc-proof, however, the result is exactly the opposite: on newer gccs (e.g. 8.2.1) the test breaks with ==== Test Assertion Failure ==== x86_64/sync_regs_test.c:168: run->s.regs.regs.rbx == 0xBAD1DEA + 1 pid=14170 tid=14170 - Invalid argument 1 0x00000000004015b3: main at sync_regs_test.c:166 (discriminator 6) 2 0x00007f413fb66412: ?? ??:0 3 0x000000000040191d: _start at ??:? rbx sync regs value incorrect 0x1. Apparently, compile is still free to play games with registers even when they have variables attached. Re-write guest code with 'asm volatile' by embedding ucall there and making sure rbx is preserved. Fixes: 204c91eff798a ("KVM: selftests: do not blindly clobber registers in guest asm") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: vmx_dirty_log_test: skip the test when VMX is not supportedVitaly Kuznetsov
vmx_dirty_log_test fails on AMD and this is no surprise as it is VMX specific. Bail early when nested VMX is unsupported. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: consolidate VMX support checksVitaly Kuznetsov
vmx_* tests require VMX and three of them implement the same check. Move it to vmx library. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: vmx_set_nested_state_test: don't check for VMX support twiceVitaly Kuznetsov
vmx_set_nested_state_test() checks if VMX is supported twice: in the very beginning (and skips the whole test if it's not) and before doing test_vmx_nested_state(). One should be enough. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22KVM: Don't shrink/grow vCPU halt_poll_ns if host side polling is disabledWanpeng Li
Don't waste cycles to shrink/grow vCPU halt_poll_ns if host side polling is disabled. Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: synchronize .gitignore to MakefileVitaly Kuznetsov
Because "Untracked files:" are annoying. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUIDJim Mattson
When the RDPID instruction is supported on the host, enumerate it in KVM_GET_SUPPORTED_CPUID. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22Merge tag 'pinctrl-v5.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here is a bunch of pin control fixes. I was lagging behind on this one, some fixes should have come in earlier, sorry about that. Anyways here it is, pretty straight-forward fixes, the Strago fix stand out as something serious affecting a lot of machines. Summary: - Handle multiple instances of Intel chips without complaining. - Restore the Intel Strago DMI workaround - Make the Armada 37xx handle pins over 32 - Fix the polarity of the LED group on Armada 37xx - Fix an off-by-one bug in the NS2 driver - Fix error path for iproc's platform_get_irq() - Fix error path on the STMFX driver - Fix a typo in the Berlin AS370 driver - Fix up misc errors in the Aspeed 2600 BMC support - Fix a stray SPDX tag" * tag 'pinctrl-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups pinctrl: aspeed-g6: Fix UART13 group pinmux pinctrl: aspeed-g6: Make SIG_DESC_CLEAR() behave intuitively pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration pinctrl: aspeed-g6: Fix I2C14 SDA description pinctrl: aspeed-g6: Sort pins for sanity dt-bindings: pinctrl: aspeed-g6: Rework SD3 function and groups pinctrl: berlin: as370: fix a typo s/spififib/spdifib pinctrl: armada-37xx: swap polarity on LED group pinctrl: stmfx: fix null pointer on remove pinctrl: iproc: allow for error from platform_get_irq() pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable() pinctrl: bcm-iproc: Use SPDX header pinctrl: armada-37xx: fix control of pins 32 and up pinctrl: cherryview: restore Strago DMI workaround for all versions pinctrl: intel: Allocate IRQ chip dynamic
2019-10-22cpuidle: haltpoll: Take 'idle=' override into accountZhenzhong Duan
Currenly haltpoll isn't aware of the 'idle=' override, the priority is 'idle=poll' > haltpoll > 'idle=halt'. When 'idle=poll' is used, cpuidle driver is bypassed but current_driver in sys still shows 'haltpoll'. When 'idle=halt' is used, haltpoll takes precedence and makes 'idle=halt' have no effect. Add a check to prevent the haltpoll driver from loading if 'idle=' is present. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Co-developed-by: Joao Martins <joao.m.martins@oracle.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-22ACPI: NFIT: Fix unlock on error in scrub_show()Dan Carpenter
We change the locking in this function and forgot to update this error path so we are accidentally still holding the "dev->lockdep_mutex". Fixes: 87a30e1f05d7 ("driver-core, libnvdimm: Let device subsystems add local lockdep coverage") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-21tracing: Fix race in perf_trace_buf initializationPrateek Sood
A race condition exists while initialiazing perf_trace_buf from perf_trace_init() and perf_kprobe_init(). CPU0 CPU1 perf_trace_init() mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() //fails perf_kprobe_init() goto fail perf_trace_event_init() perf_trace_event_reg() fail: total_ref_count == 0 total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() total_ref_count++ free_percpu(perf_trace_buf[i]) perf_trace_buf[i] = NULL Any subsequent call to perf_trace_event_reg() will observe total_ref_count > 0, causing the perf_trace_buf to be always NULL. This can result in perf_trace_buf getting accessed from perf_trace_buf_alloc() without being initialized. Acquiring event_mutex in perf_kprobe_init() before calling perf_trace_event_init() should fix this race. The race caused the following bug: Unable to handle kernel paging request at virtual address 0000003106f2003c Mem abort info: ESR = 0x96000045 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000045 CM = 0, WnR = 1 user pgtable: 4k pages, 39-bit VAs, pgdp = ffffffc034b9b000 [0000003106f2003c] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000045 [#1] PREEMPT SMP Process syz-executor (pid: 18393, stack limit = 0xffffffc093190000) pstate: 80400005 (Nzcv daif +PAN -UAO) pc : __memset+0x20/0x1ac lr : memset+0x3c/0x50 sp : ffffffc09319fc50 __memset+0x20/0x1ac perf_trace_buf_alloc+0x140/0x1a0 perf_trace_sys_enter+0x158/0x310 syscall_trace_enter+0x348/0x7c0 el0_svc_common+0x11c/0x368 el0_svc_handler+0x12c/0x198 el0_svc+0x8/0xc Ramdumps showed the following: total_ref_count = 3 perf_trace_buf = ( 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL) Link: http://lkml.kernel.org/r/1571120245-4186-1-git-send-email-prsood@codeaurora.org Cc: stable@vger.kernel.org Fixes: e12f03d7031a9 ("perf/core: Implement the 'perf_kprobe' PMU") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 04:56:55 +0000