| Age | Commit message (Collapse) | Author |
|---|
|
There were a couple different issues found in fbnic_mbx_poll_tx_ready.
Among them were the fact that we were sleeping much longer than we actually
needed to as the actual FW could respond in under 20ms. The other issue was
that we would just keep polling the mailbox even if the device itself had
gone away.
To address the responsiveness issues we can decrease the sleeps to 20ms and
use a jiffies based timeout value rather than just counting the number of
times we slept and then polled.
To address the hardware going away we can move the check for the firmware
BAR being present from where it was and place it inside the loop after the
mailbox descriptor ring is initialized and before we sleep so that we just
abort and return an error if the device went away during initialization.
With these two changes we see a significant improvement in boot times for
the driver.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654721224.499179.2698616208976624755.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There was an issue in that if we were to shutdown we could be left with
a completion in flight as the mailbox went away. To address that I have
added an fbnic_mbx_evict_all_cmpl function that is meant to essentially
create a "broken pipe" type response so that all callers will receive an
error indicating that the connection has been broken as a result of us
shutting down the mailbox.
Fixes: 378e5cc1c6c6 ("eth: fbnic: hwmon: Add completion infrastructure for firmware requests")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654720578.499179.380252598204530873.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The fbnic_mbx_flush_tx function had a number of issues.
First, we were waiting 200ms for the firmware to process the packets. We
can drop this to 20ms and in almost all cases this should be more than
enough time. So by changing this we can significantly reduce shutdown time.
Second, we were not making sure that the Tx path was actually shut off. As
such we could still have packets added while we were flushing the mailbox.
To prevent that we can now clear the ready flag for the Tx side and it
should stay down since the interrupt is disabled.
Third, we kept re-reading the tail due to the second issue. The tail should
not move after we have started the flush so we can just read it once while
we are holding the mailbox Tx lock. By doing that we are guaranteed that
the value should be consistent.
Fourth, we were keeping a count of descriptors cleaned due to the second
and third issues called out. That count is not a valid reason to be exiting
the cleanup, and with the tail only being read once we shouldn't see any
cases where the tail moves after the disable so the tracking of count can
be dropped.
Fifth, we were using attempts * sleep time to determine how long we would
wait in our polling loop to flush out the Tx. This can be very imprecise.
In order to tighten up the timing we are shifting over to using a jiffies
value of jiffies + 10 * HZ + 1 to determine the jiffies value we should
stop polling at as this should be accurate within once sleep cycle for the
total amount of time spent polling.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654719929.499179.16406653096197423749.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We have two issues that need to be addressed in our IRQ handling.
One is the fact that we can end up double-freeing IRQs in the event of an
exception handling error such as a PCIe reset/recovery that fails. To
prevent that from becoming an issue we can use the msix_vector values to
indicate that we have successfully requested/freed the IRQ by only setting
or clearing them when we have completed the given action.
The other issue is that we have several potential races in our IRQ path due
to us manipulating the mask before the vector has been truly disabled. In
order to handle that in the case of the FW mailbox we need to not
auto-enable the IRQ and instead will be enabling/disabling it separately.
In the case of the PCS vector we can mitigate this by unmapping it and
synchronizing the IRQ before we clear the mask.
The general order of operations after this change is now to request the
interrupt, poll the FW mailbox to ready, and then enable the interrupt. For
the shutdown we do the reverse where we disable the interrupt, flush any
pending Tx, and then free the IRQ. I am renaming the enable/disable to
request/free to be equivilent with the IRQ calls being used. We may see
additions in the future to enable/disable the IRQs versus request/free them
for certain use cases.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Fixes: 69684376eed5 ("eth: fbnic: Add link detection")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654719271.499179.3634535105127848325.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to prevent the device from throwing spurious writes and/or reads
at us we need to gate the AXI fabric interface to the PCIe until such time
as we know the FW is in a known good state.
To accomplish this we use the mailbox as a mechanism for us to recognize
that the FW has acknowledged our presence and is no longer sending any
stale message data to us.
We start in fbnic_mbx_init by calling fbnic_mbx_reset_desc_ring function,
disabling the DMA in both directions, and then invalidating all the
descriptors in each ring.
We then poll the mailbox in fbnic_mbx_poll_tx_ready and when the interrupt
is set by the FW we pick it up and mark the mailboxes as ready, while also
enabling the DMA.
Once we have completed all the transactions and need to shut down we call
into fbnic_mbx_clean which will in turn call fbnic_mbx_reset_desc_ring for
each ring and shut down the DMA and once again invalidate the descriptors.
Fixes: 3646153161f1 ("eth: fbnic: Add register init to set PCIe/Ethernet device config")
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654718623.499179.7445197308109347982.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Address to issues with the FW mailbox descriptor initialization.
We need to reverse the order of accesses when we invalidate an entry versus
writing an entry. When writing an entry we write upper and then lower as
the lower 32b contain the valid bit that makes the entire address valid.
However for invalidation we should write it in the reverse order so that
the upper is marked invalid before we update it.
Without this change we may see FW attempt to access pages with the upper
32b of the address set to 0 which will likely result in DMAR faults due to
write access failures on mailbox shutdown.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654717972.499179.8083789731819297034.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jonas Gorski says:
====================
net: dsa: b53: accumulated fixes
This patchset aims at fixing most issues observed while running the
vlan_unaware_bridge, vlan_aware_bridge and local_termination selftests.
Most tests succeed with these patches on BCM53115, connected to a
BCM6368.
It took me a while to figure out that a lot of tests will fail if all
ports have the same MAC address, as the switches drop any frames with
DA == SA. Luckily BCM63XX boards often have enough MACs allocated for
all ports, so I just needed to assign them.
The still failing tests are:
FDB learning, both vlan aware aware and unaware:
This is expected, as b53 currently does not implement changing the
ageing time, and both the bridge code and DSA ignore that, so the
learned entries don't age out as expected.
ping and ping6 in vlan unaware:
These fail because of the now fixed learning, the switch trying to
forward packet ingressing on one of the standalone ports to the learned
port of the mac address when the packets ingressed on the bridged port.
The port VLAN masks only prevent forwarding to other ports, but the ARL
lookup will still happen, and the packet gets dropped because the port
isn't allowed to forward there.
I have a fix/workaround for that, but as it is a bit more controversial
and makes use of an unrelated feature, I decided to hold off from that
and post it later.
This wasn't noticed so far, because learning was never working in VLAN
unaware mode, so the traffic was always broadcast (which sidesteps the
issue).
Finally some of the multicast tests from local_termination fail, where
the reception worked except it shouldn't. This doesn't seem to me as a
super serious issue, so I didn't attempt to debug/fix these yet.
I'm not super confident I didn't break sf2 along the way, but I did
compile test and tried to find ways it cause issues (I failed to find
any). I hope Florian will tell me.
====================
Link: https://patch.msgid.link/20250429201710.330937-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a port gets set up, b53 disables learning and enables the port for
flooding. This can undo any bridge configuration on the port.
E.g. the following flow would disable learning on a port:
$ ip link add br0 type bridge
$ ip link set sw1p1 master br0 <- enables learning for sw1p1
$ ip link set br0 up
$ ip link set sw1p1 up <- disables learning again
Fix this by populating dsa_switch_ops::port_setup(), and set up initial
config there.
Fixes: f9b3827ee66c ("net: dsa: b53: Support setting learning on port")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-12-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When VLAN filtering is off, we configure the switch to forward, but not
learn on VLAN table misses. This effectively disables learning while not
filtering.
Fix this by switching to forward and learn. Setting the learning disable
register will still control whether learning actually happens.
Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-11-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To allow runtime switching between vlan aware and vlan non-aware mode,
we need to properly keep track of any bridge VLAN configuration.
Likewise, we need to know when we actually switch between both modes, to
not have to rewrite the full VLAN table every time we update the VLANs.
So keep track of the current vlan_filtering mode, and on changes, apply
the appropriate VLAN configuration.
Fixes: 0ee2af4ebbe3 ("net: dsa: set configure_vlan_while_not_filtering to true by default")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-10-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Documentation/networking/switchdev.rst says:
- with VLAN filtering turned off: the bridge is strictly VLAN unaware and its
data path will process all Ethernet frames as if they are VLAN-untagged.
The bridge VLAN database can still be modified, but the modifications should
have no effect while VLAN filtering is turned off.
This breaks if we immediately apply the VLAN configuration, so skip
writing it when vlan_filtering is off.
Fixes: 0ee2af4ebbe3 ("net: dsa: set configure_vlan_while_not_filtering to true by default")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-9-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since we cannot set forwarding destinations per VLAN, we should not have
a VLAN 0 configured, as it would allow untagged traffic to work across
ports on VLAN aware bridges regardless if a PVID untagged VLAN exists.
So remove the VLAN 0 on join, an re-add it on leave. But only do so if
we have a VLAN aware bridge, as without it, untagged traffic would
become tagged with VID 0 on a VLAN unaware bridge.
Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-8-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While JOIN_ALL_VLAN allows to join all VLANs, we still need to keep the
default VLAN enabled so that untagged traffic stays untagged.
So rejoin the default VLAN even for switches with JOIN_ALL_VLAN support.
Fixes: 48aea33a77ab ("net: dsa: b53: Add JOIN_ALL_VLAN support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-7-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The untagged default VLAN is added to the default vlan, which may be
one, but we modify the VLAN 0 entry on bridge leave.
Fix this to use the correct VLAN entry for the default pvid.
Fixes: fea83353177a ("net: dsa: b53: Fix default VLAN ID")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-6-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Presumably the intention here was to flush the VLAN of the old pvid, not
the added VLAN again, which we already flushed before.
Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-5-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the PVID of ports are only set when adding/updating VLANs with
PVID set or removing VLANs, but not when clearing the PVID flag of a
VLAN.
E.g. the following flow
$ ip link add br0 type bridge vlan_filtering 1
$ ip link set sw1p1 master bridge
$ bridge vlan add dev sw1p1 vid 10 pvid untagged
$ bridge vlan add dev sw1p1 vid 10 untagged
Would keep the PVID set as 10, despite the flag being cleared. Fix this
by checking if we need to unset the PVID on vlan updates.
Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-4-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Broadcom management header does not carry the original VLAN tag
state information, just the ingress port, so for untagged frames we do
not know from which VLAN they originated.
Therefore keep the CPU port always tagged except for VLAN 0.
Fixes the following setup:
$ ip link add br0 type bridge vlan_filtering 1
$ ip link set sw1p1 master br0
$ bridge vlan add dev br0 pvid untagged self
$ ip link add sw1p2.10 link sw1p2 type vlan id 10
Where VID 10 would stay untagged on the CPU port.
Fixes: 2c32a3d3c233 ("net: dsa: b53: Do not force CPU to be always tagged")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow reserved multicast to ignore VLAN membership so STP and other
management protocols work without a PVID VLAN configured when using a
vlan aware bridge.
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250429201710.330937-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make veth_pool_store detect requested pool changes, close device if
necessary, update pool, and reopen device.
Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506160004.328347-1-davemarq@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
netlink: specs: remove phantom structs
rt-netlink and nl80211 have a few structs which may be helpful for Python
decoding of binary attrs, but which don't actually exist in the C uAPI.
This prevents us from using struct pointers for binary types in C.
We could support this situation better in the codegen, or add these
structs to uAPI. That said Johannes suggested we remove the WiFi
structs for now, and the rt-link ones are semi-broken.
Drop the struct definitions, for now, if someone has a need to use
such structs in Python (as opposed to them being defined for completeness)
we can revist.
v1: https://lore.kernel.org/20250505170215.253672-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250506194101.696272-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
devconf is even odder than SNMP. On input it reports an array of u32s
which seem to be indexed by the enum values - 1. On output kernel
expects a nest where each attr has the enum type as the nla type.
sub-type: u32 is probably best we can do right now.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
uAPI doesn't define structs for the SNMP counters, just enums to index
them as arrays. Switch to the same representation in the spec. C codegen
will soon need all the struct types to actually exist.
Note that the existing definition was broken, anyway, as the first
member should be the number of counters reported.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
C codegen will soon support using struct types for binary attrs.
Correct the struct names in OvS specs.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
C codegen will soon use structs for binary types. A handful of structs
in WiFi carry information elements from the wire, defined by the standard.
The structs are not part of uAPI, so we can't use them in C directly.
We could add them to the uAPI or add some annotation to tell the codegen
to output a local version to the user header. The former seems arbitrary
since we don't expose structs for most of the standard. The latter seems
like a lot of work for a rare occurrence. Drop the struct info for now.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/004030652d592b379e730be2f0344bebc4a03475.camel@sipsolutions.net
Link: https://patch.msgid.link/20250506194101.696272-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
tools: ynl-gen: split presence metadata
The presence metadata indicates whether given attribute was/should be
added to the Netlink message. We have 3 types of such metadata:
- bit presence for simple values like integers,
- len presence for variable size attrs, like binary and strings,
- count for arrays.
Previously this information was spread around with first two types
living in a dedicated sub-struct called _present. The counts resided
directly in the main struct with an n_ prefix.
Reshuffle these an uniformly store them in dedicated sub-structs.
The immediate motivation is that current scheme causes name collisions
for TC.
====================
Link: https://patch.msgid.link/20250505165208.248049-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While we reshuffle the presence members, move the counts as well.
Previously array count members would have been place directly in
the struct, so:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
} _present;
struct {
u32 bin;
} _len;
u32 a;
u64 b;
const unsigned char *bin;
u32 n_multi; << count
u32 *multi; << objects
};
Since len has been moved to its own presence struct move the count
as well:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
} _present;
struct {
u32 bin;
} _len;
struct {
u32 multi; << count
} _count;
u32 a;
u64 b;
const unsigned char *bin;
u32 *multi; << objects
};
This improves the consistency and allows us to remove some hacks
in the codegen. Unlike for len there is no known name collision
with the existing scheme.
Link: https://patch.msgid.link/20250505165208.248049-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each YNL struct contains the data and a sub-struct indicating which
fields are valid. Something like:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
u32 bin_len;
} _present;
u32 a;
u64 b;
const unsigned char *bin;
};
Note that the bin object 'bin' has a length stored, and that length
has a _len suffix added to the field name. This breaks if there
is a explicit field called bin_len, which is the case for some
TC actions. Move the length fields out of the _present struct,
create a new struct called _len:
struct family_op_req {
struct {
u32 a:1;
u32 b:1;
} _present;
struct {
u32 bin;
} _len;
u32 a;
u64 b;
const unsigned char *bin;
};
This should prevent name collisions and help with the packing
of the struct.
Unfortunately this is a breaking change, but hopefully the migration
isn't too painful.
Link: https://patch.msgid.link/20250505165208.248049-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Internal change to the code gen. Rename how we indicate a type
has a single bit presence from using a 'bit' string to 'present'.
This is a noop in terms of generated code but will make next
breaking change easier.
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250505165208.248049-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Meghana Malladi says:
====================
Bug fixes from XDP patch series
This patch series fixes the bugs introduced while adding
xdp support in the icssg driver, and were reproduced while
running xdp-trafficgen to generate xdp traffic on icssg interfaces.
v1: https://lore.kernel.org/all/20250428120459.244525-1-m-malladi@ti.com/
====================
Link: https://patch.msgid.link/20250506110546.4065715-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending out any kind of traffic, it is essential that the driver
keeps reporting BQL of the number of bytes that have been sent so that
BQL can track the amount of data in the queue and prevents it from
overflowing. If BQL is not reported, the driver may continue sending
packets even when the queue is full, leading to packet loss, congestion
and decreased network performance. Currently this is missing in
emac_xmit_xdp_frame() and this patch fixes it.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-4-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add __netif_tx_lock() to ensure that only one packet is being
transmitted at a time to avoid race conditions in the netif_txq
struct and prevent packet data corruption. Failing to do so causes
kernel panic with the following error:
[ 2184.746764] ------------[ cut here ]------------
[ 2184.751412] kernel BUG at lib/dynamic_queue_limits.c:99!
[ 2184.756728] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
logs: https://gist.github.com/MeghanaMalladiTI/9c7aa5fc3b7fb03f87c74aad487956e9
The lock is acquired before calling emac_xmit_xdp_frame() and released after the
call returns. This ensures that the TX queue is protected from concurrent access
during the transmission of XDP frames.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-3-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xdp_features demonstrates what all XDP capabilities are supported
on a given network device. The driver needs to set these xdp_features
flag to let the network stack know what XDP features a given driver
is supporting. These flags need to be set for a given ndev irrespective
of any XDP program being loaded or not.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250506110546.4065715-2-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When switching network namespaces with the bpf_redirect_peer helper, the
skb->mark and skb->tstamp fields are not zeroed out like they can be on
a typical netns switch. This patch clarifies that in the helper
description.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/ccc86af26d43c5c0b776bcba2601b7479c0d46d0.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When bpf_redirect_peer is used to redirect packets to a device in
another network namespace, the skb isn't scrubbed. That can lead skb
information from one namespace to be "misused" in another namespace.
As one example, this is causing Cilium to drop traffic when using
bpf_redirect_peer to redirect packets that just went through IPsec
decryption to a container namespace. The following pwru trace shows (1)
the packet path from the host's XFRM layer to the container's XFRM
layer where it's dropped and (2) the number of active skb extensions at
each function.
NETNS MARK IFACE TUPLE FUNC
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm_rcv_cb
.active_extensions = (__u8)2,
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm4_rcv_cb
.active_extensions = (__u8)2,
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 gro_cells_receive
.active_extensions = (__u8)2,
[...]
4026533547 0 eth0 10.244.3.124:35473->10.244.2.158:53 skb_do_redirect
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 ip_rcv
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 ip_rcv_core
.active_extensions = (__u8)2,
[...]
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 udp_queue_rcv_one_skb
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 __xfrm_policy_check
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 __xfrm_decode_session
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 security_xfrm_decode_session
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 kfree_skb_reason(SKB_DROP_REASON_XFRM_POLICY)
.active_extensions = (__u8)2,
In this case, there are no XFRM policies in the container's network
namespace so the drop is unexpected. When we decrypt the IPsec packet,
the XFRM state used for decryption is set in the skb extensions. This
information is preserved across the netns switch. When we reach the
XFRM policy check in the container's netns, __xfrm_policy_check drops
the packet with LINUX_MIB_XFRMINNOPOLS because a (container-side) XFRM
policy can't be found that matches the (host-side) XFRM state used for
decryption.
This patch fixes this by scrubbing the packet when using
bpf_redirect_peer, as is done on typical netns switches via veth
devices except skb->mark and skb->tstamp are not zeroed.
Fixes: 9aa1206e8f482 ("bpf: Add redirect_peer helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/1728ead5e0fe45e7a6542c36bd4e3ca07a73b7d6.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The official Airoha EN7581 firmware requires adding max_packet field in
ppe_mbox_data struct while the unofficial one used to develop the Airoha
EN7581 flowtable support does not require this field.
This patch does not introduce any real backwards compatible issue since
EN7581 fw is not publicly available in linux-firmware or other
repositories (e.g. OpenWrt) yet and the official fw version will use this
new layout. For this reason this change needs to be backported.
Moreover, make explicit the padding added by the compiler introducing
the rsv array in init_info struct.
At the same time use u32 instead of int for init_info and set_info
struct definitions in ppe_mbox_data struct.
Fixes: 23290c7bc190d ("net: airoha: Introduce Airoha NPU support")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250506-airoha-en7581-fix-ppe_mbox_data-v5-1-29cabed6864d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contain Netfilter/IPVS fixes for net:
1) Fix KMSAN uninit-value in do_output_route4, reported by syzbot.
Patch from Julian Anastasov.
2) ipset hashtable set type breaks up the hashtable into regions of
2^10 buckets. Fix the macro that determines the hashtable lock
region to protect concurrent updates. From Jozsef Kadlecsik.
* tag 'nf-25-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: fix region locking in hash types
ipvs: fix uninit-value for saddr in do_output_route4
====================
Link: https://patch.msgid.link/20250507221952.86505-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch replaces the manual Netlink attribute iteration in
output_userspace() with nla_for_each_nested(), which ensures that only
well-formed attributes are processed.
Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/0bd65949df61591d9171c0dc13e42cea8941da10.1746541734.git.echaudro@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Region locking introduced in v5.6-rc4 contained three macros to handle
the region locks: ahash_bucket_start(), ahash_bucket_end() which gave
back the start and end hash bucket values belonging to a given region
lock and ahash_region() which should give back the region lock belonging
to a given hash bucket. The latter was incorrect which can lead to a
race condition between the garbage collector and adding new elements
when a hash type of set is defined with timeouts.
Fixes: f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Reported-by: Kota Toda <kota.toda@gmo-cybersecurity.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot reports for uninit-value for the saddr argument [1].
commit 4754957f04f5 ("ipvs: do not use random local source address for
tunnels") already implies that the input value of saddr
should be ignored but the code is still reading it which can prevent
to connect the route. Fix it by changing the argument to ret_saddr.
[1]
BUG: KMSAN: uninit-value in do_output_route4+0x42c/0x4d0 net/netfilter/ipvs/ip_vs_xmit.c:147
do_output_route4+0x42c/0x4d0 net/netfilter/ipvs/ip_vs_xmit.c:147
__ip_vs_get_out_rt+0x403/0x21d0 net/netfilter/ipvs/ip_vs_xmit.c:330
ip_vs_tunnel_xmit+0x205/0x2380 net/netfilter/ipvs/ip_vs_xmit.c:1136
ip_vs_in_hook+0x1aa5/0x35b0 net/netfilter/ipvs/ip_vs_core.c:2063
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf7/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
__ip_local_out+0x758/0x7e0 net/ipv4/ip_output.c:118
ip_local_out net/ipv4/ip_output.c:127 [inline]
ip_send_skb+0x6a/0x3c0 net/ipv4/ip_output.c:1501
udp_send_skb+0xfda/0x1b70 net/ipv4/udp.c:1195
udp_sendmsg+0x2fe3/0x33c0 net/ipv4/udp.c:1483
inet_sendmsg+0x1fc/0x280 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x267/0x380 net/socket.c:727
____sys_sendmsg+0x91b/0xda0 net/socket.c:2566
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2620
__sys_sendmmsg+0x41d/0x880 net/socket.c:2702
__compat_sys_sendmmsg net/compat.c:360 [inline]
__do_compat_sys_sendmmsg net/compat.c:367 [inline]
__se_compat_sys_sendmmsg net/compat.c:364 [inline]
__ia32_compat_sys_sendmmsg+0xc8/0x140 net/compat.c:364
ia32_sys_call+0x3ffa/0x41f0 arch/x86/include/generated/asm/syscalls_32.h:346
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0xb0/0x110 arch/x86/entry/syscall_32.c:306
do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:369
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4167 [inline]
slab_alloc_node mm/slub.c:4210 [inline]
__kmalloc_cache_noprof+0x8fa/0xe00 mm/slub.c:4367
kmalloc_noprof include/linux/slab.h:905 [inline]
ip_vs_dest_dst_alloc net/netfilter/ipvs/ip_vs_xmit.c:61 [inline]
__ip_vs_get_out_rt+0x35d/0x21d0 net/netfilter/ipvs/ip_vs_xmit.c:323
ip_vs_tunnel_xmit+0x205/0x2380 net/netfilter/ipvs/ip_vs_xmit.c:1136
ip_vs_in_hook+0x1aa5/0x35b0 net/netfilter/ipvs/ip_vs_core.c:2063
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf7/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
__ip_local_out+0x758/0x7e0 net/ipv4/ip_output.c:118
ip_local_out net/ipv4/ip_output.c:127 [inline]
ip_send_skb+0x6a/0x3c0 net/ipv4/ip_output.c:1501
udp_send_skb+0xfda/0x1b70 net/ipv4/udp.c:1195
udp_sendmsg+0x2fe3/0x33c0 net/ipv4/udp.c:1483
inet_sendmsg+0x1fc/0x280 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x267/0x380 net/socket.c:727
____sys_sendmsg+0x91b/0xda0 net/socket.c:2566
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2620
__sys_sendmmsg+0x41d/0x880 net/socket.c:2702
__compat_sys_sendmmsg net/compat.c:360 [inline]
__do_compat_sys_sendmmsg net/compat.c:367 [inline]
__se_compat_sys_sendmmsg net/compat.c:364 [inline]
__ia32_compat_sys_sendmmsg+0xc8/0x140 net/compat.c:364
ia32_sys_call+0x3ffa/0x41f0 arch/x86/include/generated/asm/syscalls_32.h:346
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0xb0/0x110 arch/x86/entry/syscall_32.c:306
do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:369
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
CPU: 0 UID: 0 PID: 22408 Comm: syz.4.5165 Not tainted 6.15.0-rc3-syzkaller-00019-gbc3372351d0c #0 PREEMPT(undef)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Reported-by: syzbot+04b9a82855c8aed20860@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68138dfa.050a0220.14dd7d.0017.GAE@google.com/
Fixes: 4754957f04f5 ("ipvs: do not use random local source address for tunnels")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Add a new reviewer, Hongbo Li, for better community development
- Fix an I/O hang out of file-backed mounts
- Address a rare data corruption caused by concurrent I/Os on the same
deduplicated compressed data
- Minor cleanup
* tag 'erofs-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: ensure the extra temporary copy is valid for shortened bvecs
erofs: remove unused enum type
fs/erofs/fileio: call erofs_onlinefolio_split() after bio_add_folio()
MAINTAINERS: erofs: add myself as reviewer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some Kconfig dependency fixes"
* tag 'media/v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: cec: tda9950: add back i2c dependency
media: i2c: lt6911uxe: add two selects to Kconfig
media: platform: synopsys: VIDEO_SYNOPSYS_HDMIRX should depend on ARCH_ROCKCHIP
media: i2c: lt6911uxe: Fix Kconfig dependencies:
media: vivid: fix FB dependency
|
|
Oleksij Rempel says:
====================
lan78xx: preparation for PHYLINK conversion
This patch series contains the first part of the LAN78xx driver
refactoring in preparation for converting the driver to use the PHYLINK
framework.
The goal of this initial part is to reduce the size and complexity of
the final PHYLINK conversion by introducing incremental cleanups and
logical separation of concerns, such as:
- Improving error handling in the PHY initialization path
- Refactoring PHY detection and MAC-side configuration
- Moving LED DT configuration to a dedicated helper
- Separating USB link power and flow control setup from the main probe logic
- Extracting PHY interrupt acknowledgment logic
Each patch is self-contained and moves non-PHYLINK-specific logic out of
the way, setting the stage for the actual conversion in a follow-up
patch series.
changes v8 (as split from full v7 00/12 series):
- Split the original series to make review easier
- This part includes only preparation patches; actual PHYLINK
integration will follow
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move flow control register configuration from
lan78xx_update_flowcontrol() into a new helper function
lan78xx_configure_flowcontrol(). This separates hardware-specific
programming from policy logic and simplifies the upcoming phylink
integration.
The values used in this initial version of
lan78xx_configure_flowcontrol() are taken over as-is from the original
implementation to avoid functional changes. While they may not be
optimal for all USB and link speed combinations, they are known to work
reliably. Optimization of pause time and thresholds based on runtime
conditions can be done in a separate follow-up patch.
The forward declaration of lan78xx_configure_flowcontrol() will also be
removed later during the phylink conversion.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the USB link power configuration logic from lan78xx_link_reset()
to a new helper function lan78xx_configure_usb(). This simplifies the
main link reset path and isolates USB-specific logic.
The new function handles U1/U2 enablement based on Ethernet link speed,
but only for SuperSpeed-capable devices (LAN7800 and LAN7801). LAN7850,
a High-Speed-only device, is explicitly excluded. A warning is logged
if SuperSpeed is reported unexpectedly for LAN7850.
Add a forward declaration for lan78xx_configure_usb() as preparation for
the upcoming phylink conversion, where it will also be used from the
mac_link_up() callback.
Open questions remain:
- Why is the 1000 Mbps configuration split into two steps (U2 disable,
then U1 enable), unlike the single-step config used for 10/100 Mbps?
- U1/U2 behavior appears to depend on proper EEPROM configuration.
There are known devices in the field without EEPROM. Should the driver
enforce safe defaults in such cases?
Due to lack of USB subsystem expertise, no changes were made to this logic
beyond structural refactoring.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the PHY interrupt acknowledgment logic from lan78xx_link_reset()
to a new helper function lan78xx_phy_int_ack(). This simplifies the
code and prepares for reusing the acknowledgment logic independently
from the full link reset process, such as when using phylink.
No functional change intended.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract the LED enable logic based on the "microchip,led-modes"
property into a new helper function lan78xx_configure_leds_from_dt().
This simplifies lan78xx_phy_init() and improves modularity.
No functional changes intended.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Split out PHY detection into lan78xx_get_phy() and MAC-side setup into
lan78xx_mac_prepare_for_phy(), making the main lan78xx_phy_init() cleaner
and easier to follow.
This improves separation of concerns and prepares the code for a future
transition to phylink. Fixed PHY registration and interface selection
are now handled in lan78xx_get_phy(), while MAC-side delay configuration
is done in lan78xx_mac_prepare_for_phy().
The fixed PHY fallback is preserved for setups like EVB-KSZ9897-1,
where LAN7801 connects directly to a KSZ switch without a standard PHY
or device tree support.
No functional changes intended.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RGMII timing correctness relies on the PHY providing internal delays.
This is typically ensured via PHY driver, strap pins, or PCB layout.
Explicitly checking for a PHY driver here is unnecessary and non-standard.
This logic applies to all MACs, not just LAN78xx, and should be left to
phylib, phylink, or platform configuration.
Drop the check and rely on standard subsystem behavior.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ensure that return values from `lan78xx_write_reg()`,
`lan78xx_read_reg()`, and `phy_find_first()` are properly checked and
propagated. Use `ERR_PTR(ret)` for error reporting in
`lan7801_phy_init()` and replace `-EIO` with `-ENODEV` where appropriate
to provide more accurate error codes.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state
of zpci_dev's") the code to ignore power off of a PF that has child VFs
was changed from a direct return to a goto to the unlock and
pci_dev_put() section. The change however left the existing pci_dev_put()
untouched resulting in a doubple put. This can subsequently cause a use
after free if the struct pci_dev is released in an unexpected state.
Fix this by removing the extra pci_dev_put().
Cc: stable@vger.kernel.org
Fixes: bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
