| Age | Commit message (Collapse) | Author |
|---|
|
emcr in private struct wasn't always protected by spinlock.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The half/full duplex settings for inter packet gap counters/timer were
reversed.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
replace open coded checksum folding by csum_fold.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace the homegrown DMA memory allocation, which only works on
SGI-IP27 machines, with the generic dma allocations.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move common code for rx buffer setup into ioc3_alloc_skb and deal
with allocation failures. Also clean up allocation size calculation.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do tx ring cleaning and freeing of rx buffers, when chip is shutdown and
allocate buffers before bringing chip up.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ioc3_init did everything from reset to init rings to starting the chip.
This change move out chip start into a new function as preparation
for easier handling of receive buffer allocation failures.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After allocation of descriptor memory is now done once in probe
handling of tx ring is completely done by ioc3_clean_tx_ring. So
we remove the remaining tx ring actions out of ioc3_alloc_rings
and ioc3_free_rings and rename it to ioc3_[alloc|free]_rx_bufs
to better describe what they are doing.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move clearing of the descriptor valid bit into ioc3_alloc_rings. This
makes ioc3_clean_rx_ring obsolete.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Memory for descriptor rings are allocated/freed, when interface is
brought up/down. Since the size of the rings is not changeable by
hardware, we now allocate rings now during probe and free it, when
device is removed.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Descriptor ring sizes of the IOC3 are more or less fixed size. To
make clearer where there is a relation to ring sizes use defines.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before massaging the driver further fix oddities found by checkpatch like
- wrong indention
- comment formatting
- use of printk instead or netdev_xxx/pr_xxx
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Break up the big ioc3 register struct into functional pieces to
make use in sub-function drivers more straightforward. And while
doing that get rid of all volatile access by using readX/writeX.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removed not needed disabling of ethernet interrupts in IP27 platform code.
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In register_ftrace_function_probe(), we are not checking the return
value of alloc_and_copy_ftrace_hash(). The subsequent call to
ftrace_match_records() may end up dereferencing the same. Add a check to
ensure this doesn't happen.
Link: http://lkml.kernel.org/r/26e92574f25ad23e7cafa3cf5f7a819de1832cbe.1562249521.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: 1ec3a81a0cf42 ("ftrace: Have each function probe use its own ftrace_ops")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The race between adding a function probe and reading the probes that exist
is very subtle. It needs a comment. Also, the issue can also happen if the
probe has has the EMPTY_HASH as its func_hash.
Cc: stable@vger.kernel.org
Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
LTP testsuite on powerpc results in the below crash:
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc00000000029d800
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA PowerNV
...
CPU: 68 PID: 96584 Comm: cat Kdump: loaded Tainted: G W
NIP: c00000000029d800 LR: c00000000029dac4 CTR: c0000000001e6ad0
REGS: c0002017fae8ba10 TRAP: 0300 Tainted: G W
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28022422 XER: 20040000
CFAR: c00000000029d90c DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0
...
NIP [c00000000029d800] t_probe_next+0x60/0x180
LR [c00000000029dac4] t_mod_start+0x1a4/0x1f0
Call Trace:
[c0002017fae8bc90] [c000000000cdbc40] _cond_resched+0x10/0xb0 (unreliable)
[c0002017fae8bce0] [c0000000002a15b0] t_start+0xf0/0x1c0
[c0002017fae8bd30] [c0000000004ec2b4] seq_read+0x184/0x640
[c0002017fae8bdd0] [c0000000004a57bc] sys_read+0x10c/0x300
[c0002017fae8be30] [c00000000000b388] system_call+0x5c/0x70
The test (ftrace_set_ftrace_filter.sh) is part of ftrace stress tests
and the crash happens when the test does 'cat
$TRACING_PATH/set_ftrace_filter'.
The address points to the second line below, in t_probe_next(), where
filter_hash is dereferenced:
hash = iter->probe->ops.func_hash->filter_hash;
size = 1 << hash->size_bits;
This happens due to a race with register_ftrace_function_probe(). A new
ftrace_func_probe is created and added into the func_probes list in
trace_array under ftrace_lock. However, before initializing the filter,
we drop ftrace_lock, and re-acquire it after acquiring regex_lock. If
another process is trying to read set_ftrace_filter, it will be able to
acquire ftrace_lock during this window and it will end up seeing a NULL
filter_hash.
Fix this by just checking for a NULL filter_hash in t_probe_next(). If
the filter_hash is NULL, then this probe is just being added and we can
simply return from here.
Link: http://lkml.kernel.org/r/05e021f757625cbbb006fad41380323dbe4e3b43.1562249521.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The subtraction of the two pointers is automatically scaled by the
size of the size of the object the pointers point to, so the division
by sizeof(*i2400m->barker) is incorrect. This has been broken since
day one of the driver and is only debug, so remove the debug completely.
Also move && in condition to clean up a checkpatch warning.
Addresses-Coverity: ("Extra sizeof expression")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ARM fixes from Russell King:
"Three fixes for ARM this time around:
- A fix for update_sections_early() to cope with NULL ->mm pointers.
- A correction to the backtrace code to allow proper backtraces.
- Reinforcement of pfn_valid() with PFNs >= 4GiB"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8901/1: add a criteria for pfn_valid of arm
ARM: 8897/1: check stmfd instruction using right shift
ARM: 8874/1: mm: only adjust sections of valid mm structures
|
|
If check_cached_key() returns a non-NULL value, we still need to call
key_type::match_free() to undo key_type::match_preparse().
Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The majority of the fixes this time are for OMAP hardware, here is a
breakdown of the significant changes:
Various device tree bug fixes:
- TI am57xx boards need a voltage level fix to avoid damaging SD
cards
- vf610-bk4 fails to detect its flash due to an incorrect description
- meson-g12a USB phy configuration fails
- meson-g12b reboot should not power off the SD card
- Some corrections for apparently harmless differences from the
documentation.
Regression fixes:
- ams-delta FIQ interrupts broke in 5.3
- TI am3/am4 mmc controllers broke in 5.2
The logic_pio driver (used on some Huawei ARM servers) got a few bug
fixes for reliability.
And a couple of compile-time warning fixes"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST
soc: ti: pm33xx: Make two symbols static
soc: ti: pm33xx: Fix static checker warnings
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: dts: Fix incomplete dts data for am3 and am4 mmc
bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
ARM: dts: dra74x: Fix iodelay configuration for mmc3
ARM: dts: am335x: Fix UARTs length
ARM: OMAP2+: Fix omap4 errata warning on other SoCs
bus: hisi_lpc: Add .remove method to avoid driver unbind crash
bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
lib: logic_pio: Add logic_pio_unregister_range()
lib: logic_pio: Avoid possible overlap for unregistering regions
lib: logic_pio: Fix RCU usage
arm64: dts: amlogic: odroid-n2: keep SD card regulator always on
arm64: dts: meson-g12a-sei510: enable IR controller
arm64: dts: meson-g12a: add missing dwc2 phy-names
ARM: dts: vf610-bk4: Fix qspi node description
ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
...
|
|
Pull rdma fix from Doug Ledford:
"Much calmer week this week. Just one patch queued up:
The way the siw driver was locking around the traversal of the list of
ipv6 addresses on a device was causing a scheduling while atomic
issue. Bernard straightened it out by using the rtnl_lock"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix IPv6 addr_list locking
|
|
Pull two ceph fixes from Ilya Dryomov:
"A fix for a -rc1 regression in rbd and a trivial static checker fix"
* tag 'ceph-for-5.3-rc7' of git://github.com/ceph/ceph-client:
rbd: restore zeroing past the overlap when reading from parent
libceph: don't call crypto_free_sync_skcipher() on a NULL tfm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix init of SD cards reporting an invalid VDD range
MMC host:
- sprd: Fixes for clocks, card-detect, write-protect etc
- cadence: Fix ADMA 64-bit addressing
- tegra: Re-allow writing to SD card when GPIO pin is absent
- at91: Fix eMMC init by clearing HS200 cap as it's not supported"
* tag 'mmc-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-cadence: enable v4_mode to fix ADMA 64-bit addressing
mmc: sdhci-sprd: clear the UHS-I modes read from registers
mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTION
mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKEN
mmc: sdhci-sprd: add get_ro hook function
mmc: sdhci-sprd: fixed incorrect clock divider
mmc: core: Fix init of SD cards reporting an invalid VDD range
mmc: sdhci-of-at91: add quirk for broken HS200
Revert "mmc: sdhci-tegra: drop ->get_ro() implementation"
|
|
Pull drm fixes from Dave Airlie:
"Nothing too crazy, there's probably more patches than I'd like at this
stage, but they are all pretty self contained:
amdgpu:
- Fix GFXOFF regression for PCO and RV2
- Fix missing fence reference
- Fix VG20 power readings on certain SMU firmware versions
- Fix dpm level setup for VG20
- Add an ATPX laptop quirk
i915:
- Fix DP MST max BPC property creation after DRM register
- Fix unused ggtt deballooning and NULL dereference in guest
- Fix DSC eDP transcoder identification
- Fix WARN from DMA API debug by setting DMA max segment size
qxl:
- Make qxl reservel the vga ports using vgaargb to prevent switching to vga compatibility mode.
omap:
- Fix omap port lookup for SDI output
virtio:
- Use virtio_max_dma_size to fix an issue with swiotlb.
komeda:
- Compiler fixes to komeda.
- Add missing of_node_get() call in komeda.
- Reorder the komeda de-init functions"
* tag 'drm-fixes-2019-08-30' of git://anongit.freedesktop.org/drm/drm:
drm/komeda: Reordered the komeda's de-init functions
drm/amdgpu: fix GFXOFF on Picasso and Raven2
drm/amdgpu: Add APTX quirk for Dell Latitude 5495
drm/amd/powerplay: correct Vega20 dpm level related settings
drm/i915: Call dma_set_max_seg_size() in i915_driver_hw_probe()
drm/i915/dp: Fix DSC enable code to use cpu_transcoder instead of encoder->type
drm/i915: Don't deballoon unused ggtt drm_mm_node in linux guest
drm/i915: Do not create a new max_bpc prop for MST connectors
drm/powerplay: Fix Vega20 power reading again
drm/powerplay: Fix Vega20 Average Power value v4
drm/amdgpu: fix dma_fence_wait without reference
drm/komeda: Add missing of_node_get() call
drm/komeda: Clean warning 'komeda_component_add' might be a candidate for 'gnu_printf'
drm/komeda: Fix warning -Wunused-but-set-variable
drm/komeda: Fix error: not allocating enough data 1592 vs 1584
drm/virtio: use virtio_max_dma_size
drm/omap: Fix port lookup for SDI output
drm/qxl: get vga ioports
|
|
Quoting from mt8183 datasheet, the number of transfers to be
transferred in one transaction should be set to bigger than 1,
so we should forbid zero-length transfer and update functionality.
Reported-by: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
[wsa: shortened commit message a little]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
The driver does not support the SMBUS Quick command so remove the
flag that indicates that level of support.
By default the i2c_detect tool uses the quick command to try and
detect devices at some bus addresses. If the quick command is used
then we will not detect the device, even though it is present.
Fixes: e6e5dd3566e0 (i2c: iproc: Add Broadcom iProc I2C Driver)
Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Update MAINTAINERS record to reflect the file move
from i2c-mv64xxx.txt to marvell,mv64xxx-i2c.yaml.
Fixes: f8bbde72ef44 ("dt-bindings: i2c: mv64xxx: Add YAML schemas")
Signed-off-by: Denis Efremov <efremov@linux.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
When counting dispatched micro-ops with cnt_ctl=1, in order to prevent
sample bias, IBS hardware preloads the least significant 7 bits of
current count (IbsOpCurCnt) with random values, such that, after the
interrupt is handled and counting resumes, the next sample taken
will be slightly perturbed.
The current count bitfield is in the IBS execution control h/w register,
alongside the maximum count field.
Currently, the IBS driver writes that register with the maximum count,
leaving zeroes to fill the current count field, thereby overwriting
the random bits the hardware preloaded for itself.
Fix the driver to actually retain and carry those random bits from the
read of the IBS control register, through to its write, instead of
overwriting the lower current count bits with zeroes.
Tested with:
perf record -c 100001 -e ibs_op/cnt_ctl=1/pp -a -C 0 taskset -c 0 <workload>
'perf annotate' output before:
15.70 65: addsd %xmm0,%xmm1
17.30 add $0x1,%rax
15.88 cmp %rdx,%rax
je 82
17.32 72: test $0x1,%al
jne 7c
7.52 movapd %xmm1,%xmm0
5.90 jmp 65
8.23 7c: sqrtsd %xmm1,%xmm0
12.15 jmp 65
'perf annotate' output after:
16.63 65: addsd %xmm0,%xmm1
16.82 add $0x1,%rax
16.81 cmp %rdx,%rax
je 82
16.69 72: test $0x1,%al
jne 7c
8.30 movapd %xmm1,%xmm0
8.13 jmp 65
8.24 7c: sqrtsd %xmm1,%xmm0
8.39 jmp 65
Tested on Family 15h and 17h machines.
Machines prior to family 10h Rev. C don't have the RDWROPCNT capability,
and have the IbsOpCurCnt bitfield reserved, so this patch shouldn't
affect their operation.
It is unknown why commit db98c5faf8cb ("perf/x86: Implement 64-bit
counter support for IBS") ignored the lower 4 bits of the IbsOpCurCnt
field; the number of preloaded random bits has always been 7, AFAICT.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Arnaldo Carvalho de Melo" <acme@kernel.org>
Cc: <x86@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Borislav Petkov" <bp@alien8.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: "Namhyung Kim" <namhyung@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20190826195730.30614-1-kim.phillips@amd.com
|
|
We see our Nehalem machines reporting 'perfevents: irq loop stuck!' in
some cases when using perf:
perfevents: irq loop stuck!
WARNING: CPU: 0 PID: 3485 at arch/x86/events/intel/core.c:2282 intel_pmu_handle_irq+0x37b/0x530
...
RIP: 0010:intel_pmu_handle_irq+0x37b/0x530
...
Call Trace:
<NMI>
? perf_event_nmi_handler+0x2e/0x50
? intel_pmu_save_and_restart+0x50/0x50
perf_event_nmi_handler+0x2e/0x50
nmi_handle+0x6e/0x120
default_do_nmi+0x3e/0x100
do_nmi+0x102/0x160
end_repeat_nmi+0x16/0x50
...
? native_write_msr+0x6/0x20
? native_write_msr+0x6/0x20
</NMI>
intel_pmu_enable_event+0x1ce/0x1f0
x86_pmu_start+0x78/0xa0
x86_pmu_enable+0x252/0x310
__perf_event_task_sched_in+0x181/0x190
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
finish_task_switch+0x158/0x260
__schedule+0x2f6/0x840
? hrtimer_start_range_ns+0x153/0x210
schedule+0x32/0x80
schedule_hrtimeout_range_clock+0x8a/0x100
? hrtimer_init+0x120/0x120
ep_poll+0x2f7/0x3a0
? wake_up_q+0x60/0x60
do_epoll_wait+0xa9/0xc0
__x64_sys_epoll_wait+0x1a/0x20
do_syscall_64+0x4e/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fdeb1e96c03
...
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: acme@kernel.org
Cc: Josh Hunt <johunt@akamai.com>
Cc: bpuranda@akamai.com
Cc: mingo@redhat.com
Cc: jolsa@redhat.com
Cc: tglx@linutronix.de
Cc: namhyung@kernel.org
Cc: alexander.shishkin@linux.intel.com
Link: https://lkml.kernel.org/r/1566256411-18820-1-git-send-email-johunt@akamai.com
|
|
The IP datasheet says this controller is compatible with SD Host
Specification Version v4.00.
As it turned out, the ADMA of this IP does not work with 64-bit mode
when it is in the Version 3.00 compatible mode; it understands the
old 64-bit descriptor table (as defined in SDHCI v2), but the ADMA
System Address Register (SDHCI_ADMA_ADDRESS) cannot point to the
64-bit address.
I noticed this issue only after commit bd2e75633c80 ("dma-contiguous:
use fallback alloc_pages for single pages"). Prior to that commit,
dma_set_mask_and_coherent() returned the dma address that fits in
32-bit range, at least for the default arm64 configuration
(arch/arm64/configs/defconfig). Now the host->adma_addr exceeds the
32-bit limit, causing the real problem for the Socionext SoCs.
(As a side-note, I was also able to reproduce the issue for older
kernels by turning off CONFIG_DMA_CMA.)
Call sdhci_enable_v4_mode() to fix this.
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I
mode used by the specific card can be selected via devicetree only.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
sprd's sd host controller doesn't support detection to
card insert or remove.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The bit of PRESET_VAL_ENABLE in HOST_CONTROL2 register is reserved on
sprd's sd host controller, set quirk2 to disable configuring this.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
sprd's sd host controller doesn't support write protect to sd card.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The register SDHCI_CLOCK_CONTROL should be cleared before config clock
divider, otherwise the frequency configured maybe lower than we
expected.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The OCR register defines the supported range of VDD voltages for SD cards.
However, it has turned out that some SD cards reports an invalid voltage
range, for example having bit7 set.
When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from
the invalid VDD range, this triggers the core to run a power cycle of the
card to try to initialize it at the lowest common supported voltage.
Obviously this fails, since the card can't support it.
Let's fix this problem, by clearing invalid bits from the read OCR register
for SD cards, before proceeding with the VDD voltage negotiation.
Cc: stable@vger.kernel.org
Reported-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Philip Langdale <philipl@overt.org>
Tested-by: Philip Langdale <philipl@overt.org>
Tested-by: Manuel Presnitz <mail@mpy.de>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.3-rc7:
- Fix DP MST max BPC property creation after DRM register
- Fix unused ggtt deballooning and NULL dereference in guest
- Fix DSC eDP transcoder identification
- Fix WARN from DMA API debug by setting DMA max segment size
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a7bseati.fsf@intel.com
|
|
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct spider_net_card {
...
struct spider_net_descr darray[0];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
sizeof(struct spider_net_card) + (tx_descriptors + rx_descriptors) * sizeof(struct spider_net_descr)
with:
struct_size(card, darray, tx_descriptors + rx_descriptors)
Notice that, in this case, variable alloc_size is not necessary, hence it
is removed.
Building: allmodconfig powerpc.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.3-2019-08-28:
amdgpu:
- Fix GFXOFF regression for PCO and RV2
- Fix missing fence reference
- Fix VG20 power readings on certain SMU firmware versions
- Fix dpm level setup for VG20
- Add an ATPX laptop quirk
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829022925.32678-1-alexander.deucher@amd.com
|
|
Pull cifs fixes from Steve French:
"A few small SMB3 fixes, and a larger one to fix various older string
handling functions"
* tag '5.3-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: replace various strncpy with strscpy and similar
cifs: Use kzfree() to zero out the password
cifs: set domainName when a domain-key is used in multiuser
|
|
Get the vlan_proto of ingress bridge in network byteorder as userspace
expects. Otherwise this is inconsistent with NFT_META_PROTOCOL.
Fixes: 2a3a93ef0ba5 ("netfilter: nft_meta_bridge: Add NFT_META_BRI_IIFVPROTO support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Heiner Kallweit says:
====================
r8169: add support for RTL8125
This series adds support for the 2.5Gbps chip RTl8125. It can be found
on PCIe network cards, and on an increasing number of consumer gaming
mainboards. Series is partially based on the r8125 vendor driver.
Tested with a Delock 89531 PCIe card against a Netgear GS110MX
Multi-Gig switch.
Firmware isn't strictly needed, but on some systems there may be
compatibility issues w/o firmware. Firmware has been submitted to
linux-firmware.
v2:
- split first patch into 6 smaller ones to facilitate bisecting
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds EEE support for RTL8125 based on the vendor driver.
Supported is EEE for 100Mbps and 1Gbps. Realtek recommended to not yet
enable EEE for 2.5Gbps due to potential compatibility issues. Also
ethtool doesn't support yet controlling EEE for 2.5Gbps and 5Gbps.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds PHY initialization magic copied from the r8125 vendor
driver. In addition it supports loading the firmware for chip version
RTL_GIGA_MAC_VER_61.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for 2.5Gbps chip RTL8125, it's partially based on the
r8125 vendor driver. Tested with a Delock 89531 PCIe card against a
Netgear GS110MX Multi-Gig switch. Firmware isn't strictly needed,
but on some systems there may be compatibility issues w/o firmware.
Firmware has been submitted to linux-firmware.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On RTL8125 this bit is always cleared after send. Therefore check for
tx_skb->skb being set what is functionally equivalent.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RTL8125 uses a different register number for IntrMask.
To net have side effects by reading a random register let's
use a register that is the same on all supported chip families.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RTL8125 doesn't support the same coalescing registers, therefore move
this initialization to the 8168/6169-specific init.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For RTL8125 we will have to read the MAC address also from another
register range, therefore create a small helper.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
