summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-07USB: idmouse: drop redundant open-count check from releaseJohan Hovold
The open count will always be exactly one when release is called, so drop the redundant sanity check. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191105103638.4929-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-07USB: idmouse: simplify disconnect handlingJohan Hovold
Since commit d4ead16f50f9 ("USB: prevent char device open/deregister race") core prevents further calls to open() after usb_deregister_dev() returns so there's no need to use the interface data for synchronisation. This effectively reverts commit 54d2bc068fd2 ("USB: fix locking in idmouse") with respect to the open-disconnect race. Note that the driver already uses a present flag to suppress I/O post disconnect (even if all USB I/O take place at open). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191105103638.4929-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-07usb: Allow USB device to be warm reset in suspended stateKai-Heng Feng
On Dell WD15 dock, sometimes USB ethernet cannot be detected after plugging cable to the ethernet port, the hub and roothub get runtime resumed and runtime suspended immediately: ... [ 433.315169] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0 [ 433.315204] usb usb4: usb auto-resume [ 433.315226] hub 4-0:1.0: hub_resume [ 433.315239] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10202e2, return 0x10343 [ 433.315264] usb usb4-port1: status 0343 change 0001 [ 433.315279] xhci_hcd 0000:3a:00.0: clear port1 connect change, portsc: 0x10002e2 [ 433.315293] xhci_hcd 0000:3a:00.0: Get port status 4-2 read: 0x2a0, return 0x2a0 [ 433.317012] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.422282] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343 [ 433.422307] usb usb4-port1: do warm reset [ 433.422311] usb 4-1: device reset not allowed in state 8 [ 433.422339] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 433.422346] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343 [ 433.422356] usb usb4-port1: do warm reset [ 433.422358] usb 4-1: device reset not allowed in state 8 [ 433.422428] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 0 status = 0xf0002e2 [ 433.422455] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 1 status = 0xe0002a0 [ 433.422465] hub 4-0:1.0: hub_suspend [ 433.422475] usb usb4: bus auto-suspend, wakeup 1 [ 433.426161] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.466209] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.510204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.554051] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.598235] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.642154] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.686204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.730205] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.774203] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.818207] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.862040] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.862053] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.862077] xhci_hcd 0000:3a:00.0: xhci_suspend: stopping port polling. [ 433.862096] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001 [ 433.862312] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_suspend: 0 [ 433.862445] xhci_hcd 0000:3a:00.0: PME# enabled [ 433.902376] xhci_hcd 0000:3a:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20) [ 433.902395] xhci_hcd 0000:3a:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100403) [ 433.902490] xhci_hcd 0000:3a:00.0: PME# disabled [ 433.902504] xhci_hcd 0000:3a:00.0: enabling bus mastering [ 433.902547] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001 [ 433.902649] pcieport 0000:00:1b.0: PME: Spurious native interrupt! [ 433.902839] xhci_hcd 0000:3a:00.0: Port change event, 4-1, id 3, portsc: 0xb0202e2 [ 433.902842] xhci_hcd 0000:3a:00.0: resume root hub [ 433.902845] xhci_hcd 0000:3a:00.0: handle_port_status: starting port polling. [ 433.902877] xhci_hcd 0000:3a:00.0: xhci_resume: starting port polling. [ 433.902889] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.902891] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0 [ 433.902919] usb usb4: usb wakeup-resume [ 433.902942] usb usb4: usb auto-resume [ 433.902966] hub 4-0:1.0: hub_resume ... As Mathias pointed out, the hub enters Cold Attach Status state and requires a warm reset. However usb_reset_device() bails out early when the device is in suspended state, as its callers port_event() and hub_event() don't always resume the device. Since there's nothing wrong to reset a suspended device, allow usb_reset_device() to do so to solve the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106062710.29880-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-07usb: gadget: pch_udc: fix use after freeGustavo A. R. Silva
Remove pointer dereference after free. pci_pool_free doesn't care about contents of td. It's just a void* for it Addresses-Coverity-ID: 1091173 ("Use after free") Cc: stable@vger.kernel.org Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20191106202821.GA20347@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-07dt-bindings: usb: renesas: usb3-peri: convert bindings to json-schemaYoshihiro Shimoda
Convert Renesas USB 3.0 Peripheral controller bindings documentation to json-schema. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1573036493-16525-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: ucsi: Optimise ucsi_unregister()Heikki Krogerus
There is no need to reset the PPM when the interface is unregistered. Quietly silencing the notifications and then unregistering everything is enough. This speeds up ucsi_unregister() a lot. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-19-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: ucsi: New error codesHeikki Krogerus
Adding new error codes to the driver that were introduced in UCSI specification v1.1. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-18-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: ucsi: Remove all bit-fieldsHeikki Krogerus
We can't use bit fields with data that is received or send to/from the device. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ajay Gupta <ajayg@nvidia.com> Link: https://lore.kernel.org/r/20191104142435.29960-17-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: ucsi: Remove struct ucsi_controlHeikki Krogerus
That data structure was used for constructing the commands before executing them, but it was never really useful. Using the structure just complicated the driver. The commands are 64-bit wide, so it is enough to simply fill a u64 variable. No data structures needed. This simplifies the driver considerable and makes it much easier to for example add support for big endian systems later on. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-16-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: ucsi: Remove the old APIHeikki Krogerus
The drivers now only use the new API, so removing the old one. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-15-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: ucsi: ccg: Move to the new APIHeikki Krogerus
Replacing the old "cmd" and "sync" callbacks with an implementation of struct ucsi_operations. The interrupt handler will from now on read the CCI (Command Status and Connector Change Indication) register, and call ucsi_connector_change() function and/or complete pending command completions based on it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-14-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: ucsi: acpi: Move to the new APIHeikki Krogerus
Replacing the old "cmd" and "sync" callbacks with an implementation of struct ucsi_operations. The ACPI notification (interrupt) handler will from now on read the CCI (Command Status and Connector Change Indication) register, and call ucsi_connector_change() function and/or complete pending command completions based on it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-13-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: ucsi: Simplified registration and I/O APIHeikki Krogerus
Adding more simplified API for interface registration and read and write operations. The registration is split into separate creation and registration phases. That allows the drivers to properly initialize the interface before registering it if necessary. The read and write operations are supplied in a completely separate struct ucsi_operations that is passed to the ucsi_register() function during registration. The new read and write operations will work more traditionally so that the read callback function reads a requested amount of data from an offset, and the write callback functions write the given data to the offset. The drivers will have to support both non-blocking writing and blocking writing. In blocking writing the driver itself is responsible of waiting for the completion event. The new API makes it possible for the drivers to perform tasks also independently of the core ucsi.c, and that should allow for example quirks to be handled completely in the drivers without the need to touch ucsi.c. The old API is kept until all drivers have been converted to the new API. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-12-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: hd3ss3220: Give the connector fwnode to the port deviceHeikki Krogerus
The driver already finds the node in order to get reference to the USB role switch. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-11-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: Remove unused members from struct typec_capabilityHeikki Krogerus
The members for the muxes are not used, so dropping them. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-10-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: Remove the callback members from struct typec_capabilityHeikki Krogerus
There are no more users for them. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-9-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: hd3ss3220: Start using struct typec_operationsHeikki Krogerus
Supplying the operation callbacks as part of a struct typec_operations instead of as part of struct typec_capability during port registration. After this there is not need to keep the capabilities stored anywhere in the driver. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-8-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: ucsi: Start using struct typec_operationsHeikki Krogerus
Supplying the operation callbacks as part of a struct typec_operations instead of as part of struct typec_capability during port registration. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-7-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: tps6598x: Start using struct typec_operationsHeikki Krogerus
Supplying the operation callbacks as part of a struct typec_operations instead of as part of struct typec_capability during port registration. After this there is not need to keep the capabilities stored anywhere in the driver. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-6-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: tcpm: Start using struct typec_operationsHeikki Krogerus
Supplying the operation callbacks as part of a struct typec_operations instead of as part of struct typec_capability during port registration. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-5-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: Separate the operations vectorHeikki Krogerus
Introducing struct typec_operations which has the same callbacks as struct typec_capability. The old callbacks are kept for now, but after all users have been converted, they will be removed. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-4-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: Introduce typec_get_drvdata()Heikki Krogerus
Leaving the private driver_data pointer of the port device to the port drivers. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: typec: Copy everything from struct typec_capability during registrationHeikki Krogerus
Copying everything from struct typec_capability to struct typec_port during port registration. This will make sure that under no circumstances the driver can change the values in the struct typec_capability that the port uses. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipeinAndrey Konovalov
Commit fea3409112a9 ("USB: add direction bit to urb->transfer_flags") has added a usb_urb_dir_in() helper function that can be used to determine the direction of the URB. With that patch USB_DIR_IN control requests with wLength == 0 are considered out requests by real USB HCDs. This patch changes dummy-hcd to use the usb_urb_dir_in() helper to match that behavior. Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Link: https://lore.kernel.org/r/4ae9e68ebca02f08a93ac61fe065057c9a01f0a8.1571667489.git.andreyknvl@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04USB: dummy-hcd: increase max number of devices to 32Andrey Konovalov
When fuzzing the USB subsystem with syzkaller, we currently use 8 testing processes within one VM. To isolate testing processes from one another it is desirable to assign a dedicated USB bus to each of those, which means we need at least 8 Dummy UDC/HCD devices. This patch increases the maximum number of Dummy UDC/HCD devices to 32 (more than 8 in case we need more of them in the future). Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Link: https://lore.kernel.org/r/665578f904484069bb6100fb20283b22a046ad9b.1571667489.git.andreyknvl@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: host: fotg210: add missed clk_put callsChuhong Yuan
The driver forgets to call clk_put when probe fails and remove. Add the calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191102062245.4014-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: Spelling s/disconnet/disconnect/Geert Uytterhoeven
Fix misspellings of "disconnect". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191024152747.30617-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: Spelling s/enpoint/endpoint/Geert Uytterhoeven
Fix misspellings of "endpoint". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Li Yang <leoyang.li@nxp.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20191024152833.30698-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: usb251xb: Add support for USB2422Uwe Kleine-König
The USB2422 uses a different package that the USB251x and only comes in a variant with 2 downstream ports. Other than that it is software compatible. Tested-by: Carsten Stelling <carsten.stelling@goerlitz.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20191023105250.16537-3-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: usb251xb: Document chip variant usb2422Uwe Kleine-König
The next patch introduces support for the USB2422. Add it to the list of devices supported by the binding. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20191023105250.16537-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: usb251xb: Drop some unused definesUwe Kleine-König
The five removed symbols are unused since they were introduced in commit 3ec72a2a1e5d ("usb: misc: add USB251xB/xBi Hi-Speed Hub Controller Driver") back in 2017. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20191023105250.16537-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: host: oxu210hp-hcd: fix __iomem annotationsBen Dooks (Codethink)
There are a number of places in the driver where it fails to maintain __iomem on pointers used to access registers so fixup the warnings by adding these in the appropriate places. Examples of the sparse warnings fixed: drivers/usb/host/oxu210hp-hcd.c:686:9: warning: incorrect type in argument 2 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:686:9: expected void volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:686:9: got void * drivers/usb/host/oxu210hp-hcd.c:686:9: warning: incorrect type in argument 2 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:686:9: expected void volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:686:9: got void * drivers/usb/host/oxu210hp-hcd.c:686:9: warning: incorrect type in argument 2 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:686:9: expected void volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:686:9: got void * drivers/usb/host/oxu210hp-hcd.c:681:16: warning: incorrect type in argument 1 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:681:16: expected void const volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:681:16: got void * Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191017171934.8771-1-ben.dooks@codethink.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04USB: bcma: Add a check for devm_gpiod_getChuhong Yuan
bcma_hcd_probe misses a check for devm_gpiod_get and may miss the error. Add a check for it and return the error if a failure occurs. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191016083531.5734-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: ohci-nxp: fix use of integer as pointerBen Dooks
The hcd pointer in ohci_hcd_nxp_probe() is being initialised with a 0, so fix to NULL to avoid the following sparse warning: drivers/usb/host/ohci-nxp.c:153:31: warning: Using plain integer as NULL pointer Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Link: https://lore.kernel.org/r/20191015141945.16067-1-ben.dooks@codethink.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04extcon: axp288: Remove the build-in connection descriptionHeikki Krogerus
Getting handle to the USB role switch by first finding its software fwnode. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20191008122600.22340-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: roles: Add usb_role_switch_find_by_fwnode()Heikki Krogerus
Simple wrapper function that searches USB role switches with class_find_device_by_fwnode(). Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20191008122600.22340-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04Merge 5.4-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-03Linux 5.4-rc6v5.4-rc6Linus Torvalds
2019-11-03Merge tag 'usb-5.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "The USB sub-maintainers woke up this past week and sent a bunch of tiny fixes. Here are a lot of small patches that that resolve a bunch of reported issues in the USB core, drivers, serial drivers, gadget drivers, and of course, xhci :) All of these have been in linux-next with no reported issues" * tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits) usb: dwc3: gadget: fix race when disabling ep with cancelled xfers usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed host usb: cdns3: gadget: reset EP_CLAIMED flag while unloading USB: serial: whiteheat: fix line-speed endianness USB: serial: whiteheat: fix potential slab corruption USB: gadget: Reject endpoints with 0 maxpacket value UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments") usb-storage: Revert commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") usbip: Fix free of unallocated memory in vhci tx usbip: tools: Fix read_usb_vudc_device() error path handling usb: xhci: fix __le32/__le64 accessors in debugfs code usb: xhci: fix Immediate Data Transfer endianness xhci: Fix use-after-free regression in xhci clear hub TT implementation USB: ldusb: fix control-message timeout USB: ldusb: use unsigned size format specifiers USB: ldusb: fix ring-buffer locking USB: Skip endpoints with 0 maxpacket length usb: cdns3: gadget: Don't manage pullups usb: dwc3: remove the call trace of USBx_GFLADJ usb: gadget: configfs: fix concurrent issue between composite APIs ...
2019-11-02Merge tag '5.4-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fix from Steve French: "A small smb3 memleak fix" * tag '5.4-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6: fix memory leak in large read decrypt offload
2019-11-02Merge tag 'hwmon-for-v5.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix read timeout problem in ina3221 driver - Fix wrong bitmask in nct7904 driver * tag 'hwmon-for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ina3221) Fix read timeout issue hwmon: (nct7904) Fix the incorrect value of vsen_mask & tcpu_mask & temp_mode in nct7904_data struct.
2019-11-02Merge tag 'pwm/for-5.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "It turned out that relying solely on drivers storing all the PWM state in hardware was a little premature and causes a number of subtle (and some not so subtle) regressions. Revert the offending patch for now" * tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: Revert "pwm: Let pwm_get_state() return the last implemented state"
2019-11-02Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4] and one core change in sd that fixes an I/O failure on DIF type 3 devices" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: stop timer in shutdown path scsi: sd: define variable dif as unsigned int instead of bool scsi: target: cxgbit: Fix cxgbit_fw4_ack() scsi: qla2xxx: Fix partial flash write of MBI scsi: qla2xxx: Initialized mailbox to prevent driver load failure scsi: lpfc: Honor module parameter lpfc_use_adisc scsi: ufs-bsg: Wake the device before sending raw upiu commands scsi: lpfc: Check queue pointer before use scsi: qla2xxx: fixup incorrect usage of host_byte
2019-11-02Merge tag 'powerpc-5.4-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Our recent cleanup of EEH led to an oops on bare metal machines when the cxl (CAPI) driver creates virtual devices for an attached FPGA accelerator. The "secure virtual machine" support we added in v5.4 had a bug if the kernel was relocated (moved during boot), in those cases the signature of the kernel text wouldn't verify and the Ultravisor would refuse to run the VM. A recent change to disable interrupts before calling arch_cpu_idle_dead() caused a WARN_ON() in our bare metal CPU offline code to always trigger. The KUAP (SMAP) support we added for 32-bit Book3S had a bug if the address range crossed a segment (256MB) boundary which could lead to spurious faults. Thanks to: Christophe Leroy, Frederic Barrat, Michael Anderson, Nicholas Piggin, Sam Bobroff, Thiago Jung Bauermann" * tag 'powerpc-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Fix CPU idle to be called with IRQs disabled powerpc/prom_init: Undo relocation before entering secure mode powerpc/powernv/eeh: Fix oops when probing cxl devices powerpc/32s: fix allow/prevent_user_access() when crossing segment boundaries.
2019-11-02Merge tag 's390-5.4-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix cpu idle time accounting - Fix stack unwinder case when both pt_regs and sp are specified - Fix information leak via cmm timeout proc handler * tag 's390-5.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/idle: fix cpu idle time calculation s390/unwind: fix mixing regs and sp s390/cmm: fix information leak in cmm_timeout_handler()
2019-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix free/alloc races in batmanadv, from Sven Eckelmann. 2) Several leaks and other fixes in kTLS support of mlx5 driver, from Tariq Toukan. 3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke Høiland-Jørgensen. 4) Add an r8152 device ID, from Kazutoshi Noguchi. 5) Missing include in ipv6's addrconf.c, from Ben Dooks. 6) Use siphash in flow dissector, from Eric Dumazet. Attackers can easily infer the 32-bit secret otherwise etc. 7) Several netdevice nesting depth fixes from Taehee Yoo. 8) Fix several KCSAN reported errors, from Eric Dumazet. For example, when doing lockless skb_queue_empty() checks, and accessing sk_napi_id/sk_incoming_cpu lockless as well. 9) Fix jumbo packet handling in RXRPC, from David Howells. 10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet. 11) Fix DMA synchronization in gve driver, from Yangchun Fu. 12) Several bpf offload fixes, from Jakub Kicinski. 13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo. 14) Fix ping latency during high traffic rates in hisilicon driver, from Jiangfent Xiao. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) net: fix installing orphaned programs net: cls_bpf: fix NULL deref on offload filter removal selftests: bpf: Skip write only files in debugfs selftests: net: reuseport_dualstack: fix uninitalized parameter r8169: fix wrong PHY ID issue with RTL8168dp net: dsa: bcm_sf2: Fix IMP setup for port different than 8 net: phylink: Fix phylink_dbg() macro gve: Fixes DMA synchronization. inet: stop leaking jiffies on the wire ixgbe: Remove duplicate clear_bit() call Documentation: networking: device drivers: Remove stray asterisks e1000: fix memory leaks i40e: Fix receive buffer starvation for AF_XDP igb: Fix constant media auto sense switching when no cable is connected net: ethernet: arc: add the missed clk_disable_unprepare igb: Enable media autosense for the i350. igb/igc: Don't warn on fatal read failures when the device is removed tcp: increase tcp_max_syn_backlog max value net: increase SOMAXCONN to 4096 netdevsim: Fix use-after-free during device dismantle ...
2019-11-01Merge tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Anna Schumaker: "This contains two delegation fixes (with the RCU lock leak fix marked for stable), and three patches to fix destroying the the sunrpc back channel. Stable bugfixes: - Fix an RCU lock leak in nfs4_refresh_delegation_stateid() Other fixes: - The TCP back channel mustn't disappear while requests are outstanding - The RDMA back channel mustn't disappear while requests are outstanding - Destroy the back channel when we destroy the host transport - Don't allow a cached open with a revoked delegation" * tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Fix an RCU lock leak in nfs4_refresh_delegation_stateid() NFSv4: Don't allow a cached open with a revoked delegation SUNRPC: Destroy the back channel when we destroy the host transport SUNRPC: The RDMA back channel mustn't disappear while requests are outstanding SUNRPC: The TCP back channel mustn't disappear while requests are outstanding
2019-11-01Merge tag 'for-linus-20191101' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Two small nvme fixes, one is a fabrics connection fix, the other one a cleanup made possible by that fix (Anton, via Keith) - Fix requeue handling in umb ubd (Anton) - Fix spin_lock_irq() nesting in blk-iocost (Dan) - Three small io_uring fixes: - Install io_uring fd after done with ctx (me) - Clear ->result before every poll issue (me) - Fix leak of shadow request on error (Pavel) * tag 'for-linus-20191101' of git://git.kernel.dk/linux-block: iocost: don't nest spin_lock_irq in ioc_weight_write() io_uring: ensure we clear io_kiocb->result before each issue um-ubd: Entrust re-queue to the upper layers nvme-multipath: remove unused groups_only mode in ana log nvme-multipath: fix possible io hang after ctrl reconnect io_uring: don't touch ctx in setup after ring fd install io_uring: Fix leaked shadow_req
2019-11-01Merge tag 'riscv/for-v5.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "One fix for PCIe users: - Fix legacy PCI I/O port access emulation One set of cleanups: - Resolve most of the warnings generated by sparse across arch/riscv. No functional changes And one MAINTAINERS update: - Update Palmer's E-mail address" * tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: MAINTAINERS: Change to my personal email address RISC-V: Add PCIe I/O BAR memory mapping riscv: for C functions called only from assembly, mark with __visible riscv: fp: add missing __user pointer annotations riscv: add missing header file includes riscv: mark some code and data as file-static riscv: init: merge split string literals in preprocessor directive riscv: add prototypes for assembly language functions from head.S
2019-11-01Merge branch 'parisc-5.4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "Fix a parisc kernel crash with ftrace functions when compiled without frame pointers" * 'parisc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix frame pointer in ftrace_regs_caller()
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 07:01:46 +0000